| /* |
| * Copyright (C) 2009 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #pragma once |
| |
| #include <atomic> |
| #include <functional> |
| #include <memory> |
| #include <unordered_set> |
| |
| #include <stdint.h> |
| #include <sys/types.h> |
| #include <cutils/config_utils.h> |
| #include <cutils/misc.h> |
| #include <utils/Timers.h> |
| #include <utils/Errors.h> |
| #include <utils/KeyedVector.h> |
| #include <utils/SortedVector.h> |
| #include <media/AudioParameter.h> |
| #include <media/AudioPolicy.h> |
| #include <media/AudioProfile.h> |
| #include <media/PatchBuilder.h> |
| #include "AudioPolicyInterface.h" |
| |
| #include <android/media/DeviceConnectedState.h> |
| #include <android/media/audio/common/AudioPort.h> |
| #include <AudioPolicyManagerObserver.h> |
| #include <AudioPolicyConfig.h> |
| #include <PolicyAudioPort.h> |
| #include <AudioPatch.h> |
| #include <DeviceDescriptor.h> |
| #include <IOProfile.h> |
| #include <HwModule.h> |
| #include <AudioInputDescriptor.h> |
| #include <AudioOutputDescriptor.h> |
| #include <AudioPolicyMix.h> |
| #include <EffectDescriptor.h> |
| #include <PreferredMixerAttributesInfo.h> |
| #include <SoundTriggerSession.h> |
| #include "EngineLibrary.h" |
| #include "TypeConverter.h" |
| |
| namespace android { |
| |
| using content::AttributionSourceState; |
| |
| // ---------------------------------------------------------------------------- |
| |
| // Attenuation applied to STRATEGY_SONIFICATION streams when a headset is connected: 6dB |
| #define SONIFICATION_HEADSET_VOLUME_FACTOR_DB (-6) |
| // Min volume for STRATEGY_SONIFICATION streams when limited by music volume: -36dB |
| #define SONIFICATION_HEADSET_VOLUME_MIN_DB (-36) |
| // Max volume difference on A2DP between playing media and STRATEGY_SONIFICATION streams: 12dB |
| #define SONIFICATION_A2DP_MAX_MEDIA_DIFF_DB (12) |
| |
| // Time in milliseconds during which we consider that music is still active after a music |
| // track was stopped - see computeVolume() |
| #define SONIFICATION_HEADSET_MUSIC_DELAY 5000 |
| |
| // Time in milliseconds during witch some streams are muted while the audio path |
| // is switched |
| #define MUTE_TIME_MS 2000 |
| |
| // multiplication factor applied to output latency when calculating a safe mute delay when |
| // invalidating tracks |
| #define LATENCY_MUTE_FACTOR 4 |
| |
| #define NUM_TEST_OUTPUTS 5 |
| |
| #define NUM_VOL_CURVE_KNEES 2 |
| |
| // Default minimum length allowed for offloading a compressed track |
| // Can be overridden by the audio.offload.min.duration.secs property |
| #define OFFLOAD_DEFAULT_MIN_DURATION_SECS 60 |
| |
| // ---------------------------------------------------------------------------- |
| // AudioPolicyManager implements audio policy manager behavior common to all platforms. |
| // ---------------------------------------------------------------------------- |
| |
| class AudioPolicyManager : public AudioPolicyInterface, public AudioPolicyManagerObserver |
| { |
| |
| public: |
| AudioPolicyManager(const sp<const AudioPolicyConfig>& config, |
| EngineInstance&& engine, |
| AudioPolicyClientInterface *clientInterface); |
| virtual ~AudioPolicyManager(); |
| |
| // AudioPolicyInterface |
| virtual status_t setDeviceConnectionState(audio_policy_dev_state_t state, |
| const android::media::audio::common::AudioPort& port, audio_format_t encodedFormat); |
| virtual audio_policy_dev_state_t getDeviceConnectionState(audio_devices_t device, |
| const char *device_address); |
| virtual status_t handleDeviceConfigChange(audio_devices_t device, |
| const char *device_address, |
| const char *device_name, |
| audio_format_t encodedFormat); |
| virtual void setPhoneState(audio_mode_t state); |
| virtual void setForceUse(audio_policy_force_use_t usage, |
| audio_policy_forced_cfg_t config); |
| virtual audio_policy_forced_cfg_t getForceUse(audio_policy_force_use_t usage); |
| |
| virtual void setSystemProperty(const char* property, const char* value); |
| virtual status_t initCheck(); |
| virtual audio_io_handle_t getOutput(audio_stream_type_t stream); |
| status_t getOutputForAttr(const audio_attributes_t *attr, |
| audio_io_handle_t *output, |
| audio_session_t session, |
| audio_stream_type_t *stream, |
| const AttributionSourceState& attributionSource, |
| audio_config_t *config, |
| audio_output_flags_t *flags, |
| audio_port_handle_t *selectedDeviceId, |
| audio_port_handle_t *portId, |
| std::vector<audio_io_handle_t> *secondaryOutputs, |
| output_type_t *outputType, |
| bool *isSpatialized, |
| bool *isBitPerfect) override; |
| virtual status_t startOutput(audio_port_handle_t portId); |
| virtual status_t stopOutput(audio_port_handle_t portId); |
| virtual bool releaseOutput(audio_port_handle_t portId); |
| virtual status_t getInputForAttr(const audio_attributes_t *attr, |
| audio_io_handle_t *input, |
| audio_unique_id_t riid, |
| audio_session_t session, |
| const AttributionSourceState& attributionSource, |
| audio_config_base_t *config, |
| audio_input_flags_t flags, |
| audio_port_handle_t *selectedDeviceId, |
| input_type_t *inputType, |
| audio_port_handle_t *portId); |
| |
| // indicates to the audio policy manager that the input starts being used. |
| virtual status_t startInput(audio_port_handle_t portId); |
| |
| // indicates to the audio policy manager that the input stops being used. |
| virtual status_t stopInput(audio_port_handle_t portId); |
| virtual void releaseInput(audio_port_handle_t portId); |
| virtual void checkCloseInputs(); |
| /** |
| * @brief initStreamVolume: even if the engine volume files provides min and max, keep this |
| * api for compatibility reason. |
| * AudioServer will get the min and max and may overwrite them if: |
| * -using property (highest priority) |
| * -not defined (-1 by convention), case when still using apm volume tables XML files |
| * @param stream to be considered |
| * @param indexMin to set |
| * @param indexMax to set |
| */ |
| virtual void initStreamVolume(audio_stream_type_t stream, int indexMin, int indexMax); |
| virtual status_t setStreamVolumeIndex(audio_stream_type_t stream, |
| int index, |
| audio_devices_t device); |
| virtual status_t getStreamVolumeIndex(audio_stream_type_t stream, |
| int *index, |
| audio_devices_t device); |
| |
| virtual status_t setVolumeIndexForAttributes(const audio_attributes_t &attr, |
| int index, |
| audio_devices_t device); |
| virtual status_t getVolumeIndexForAttributes(const audio_attributes_t &attr, |
| int &index, |
| audio_devices_t device); |
| virtual status_t getMaxVolumeIndexForAttributes(const audio_attributes_t &attr, int &index); |
| |
| virtual status_t getMinVolumeIndexForAttributes(const audio_attributes_t &attr, int &index); |
| |
| status_t setVolumeCurveIndex(int index, |
| audio_devices_t device, |
| IVolumeCurves &volumeCurves); |
| |
| status_t getVolumeIndex(const IVolumeCurves &curves, int &index, |
| const DeviceTypeSet& deviceTypes) const; |
| |
| // return the strategy corresponding to a given stream type |
| virtual product_strategy_t getStrategyForStream(audio_stream_type_t stream) |
| { |
| return streamToStrategy(stream); |
| } |
| product_strategy_t streamToStrategy(audio_stream_type_t stream) const |
| { |
| auto attributes = mEngine->getAttributesForStreamType(stream); |
| return mEngine->getProductStrategyForAttributes(attributes); |
| } |
| |
| /** |
| * Returns a vector of devices associated with attributes. |
| * |
| * An AudioTrack opened with specified attributes should play on the returned devices. |
| * If forVolume is set to true, the caller is AudioService, determining the proper |
| * device volume to adjust. |
| * |
| * Devices are determined in the following precedence: |
| * 1) Devices associated with a dynamic policy matching the attributes. This is often |
| * a remote submix from MIX_ROUTE_FLAG_LOOP_BACK. Secondary mixes from a |
| * dynamic policy are not included. |
| * |
| * If no such dynamic policy then |
| * 2) Devices containing an active client using setPreferredDevice |
| * with same strategy as the attributes. |
| * (from the default Engine::getOutputDevicesForAttributes() implementation). |
| * |
| * If no corresponding active client with setPreferredDevice then |
| * 3) Devices associated with the strategy determined by the attributes |
| * (from the default Engine::getOutputDevicesForAttributes() implementation). |
| * |
| * @param attributes to be considered |
| * @param devices an AudioDeviceTypeAddrVector container passed in that |
| * will be filled on success. |
| * @param forVolume true if the devices are to be associated with current device volume. |
| * @return NO_ERROR on success. |
| */ |
| virtual status_t getDevicesForAttributes( |
| const audio_attributes_t &attributes, |
| AudioDeviceTypeAddrVector *devices, |
| bool forVolume); |
| |
| virtual audio_io_handle_t getOutputForEffect(const effect_descriptor_t *desc = NULL); |
| virtual status_t registerEffect(const effect_descriptor_t *desc, |
| audio_io_handle_t io, |
| product_strategy_t strategy, |
| int session, |
| int id); |
| virtual status_t unregisterEffect(int id); |
| virtual status_t setEffectEnabled(int id, bool enabled); |
| status_t moveEffectsToIo(const std::vector<int>& ids, audio_io_handle_t io) override; |
| |
| virtual bool isStreamActive(audio_stream_type_t stream, uint32_t inPastMs = 0) const; |
| // return whether a stream is playing remotely, override to change the definition of |
| // local/remote playback, used for instance by notification manager to not make |
| // media players lose audio focus when not playing locally |
| // For the base implementation, "remotely" means playing during screen mirroring which |
| // uses an output for playback with a non-empty, non "0" address. |
| virtual bool isStreamActiveRemotely(audio_stream_type_t stream, |
| uint32_t inPastMs = 0) const; |
| |
| virtual bool isSourceActive(audio_source_t source) const; |
| |
| // helpers for dump(int fd) |
| void dumpManualSurroundFormats(String8 *dst) const; |
| void dump(String8 *dst) const; |
| |
| status_t dump(int fd) override; |
| |
| status_t setAllowedCapturePolicy(uid_t uid, audio_flags_mask_t capturePolicy) override; |
| virtual audio_offload_mode_t getOffloadSupport(const audio_offload_info_t& offloadInfo); |
| |
| virtual bool isDirectOutputSupported(const audio_config_base_t& config, |
| const audio_attributes_t& attributes); |
| |
| virtual status_t listAudioPorts(audio_port_role_t role, |
| audio_port_type_t type, |
| unsigned int *num_ports, |
| struct audio_port_v7 *ports, |
| unsigned int *generation); |
| status_t listDeclaredDevicePorts(media::AudioPortRole role, |
| std::vector<media::AudioPortFw>* result) override; |
| virtual status_t getAudioPort(struct audio_port_v7 *port); |
| virtual status_t createAudioPatch(const struct audio_patch *patch, |
| audio_patch_handle_t *handle, |
| uid_t uid); |
| virtual status_t releaseAudioPatch(audio_patch_handle_t handle, |
| uid_t uid); |
| virtual status_t listAudioPatches(unsigned int *num_patches, |
| struct audio_patch *patches, |
| unsigned int *generation); |
| virtual status_t setAudioPortConfig(const struct audio_port_config *config); |
| |
| virtual void releaseResourcesForUid(uid_t uid); |
| |
| virtual status_t acquireSoundTriggerSession(audio_session_t *session, |
| audio_io_handle_t *ioHandle, |
| audio_devices_t *device); |
| |
| virtual status_t releaseSoundTriggerSession(audio_session_t session) |
| { |
| return mSoundTriggerSessions.releaseSession(session); |
| } |
| |
| virtual status_t registerPolicyMixes(const Vector<AudioMix>& mixes); |
| virtual status_t unregisterPolicyMixes(Vector<AudioMix> mixes); |
| virtual status_t setUidDeviceAffinities(uid_t uid, |
| const AudioDeviceTypeAddrVector& devices); |
| virtual status_t removeUidDeviceAffinities(uid_t uid); |
| virtual status_t setUserIdDeviceAffinities(int userId, |
| const AudioDeviceTypeAddrVector& devices); |
| virtual status_t removeUserIdDeviceAffinities(int userId); |
| |
| virtual status_t setDevicesRoleForStrategy(product_strategy_t strategy, |
| device_role_t role, |
| const AudioDeviceTypeAddrVector &devices); |
| |
| virtual status_t removeDevicesRoleForStrategy(product_strategy_t strategy, |
| device_role_t role, |
| const AudioDeviceTypeAddrVector &devices); |
| |
| virtual status_t clearDevicesRoleForStrategy(product_strategy_t strategy, |
| device_role_t role); |
| |
| virtual status_t getDevicesForRoleAndStrategy(product_strategy_t strategy, |
| device_role_t role, |
| AudioDeviceTypeAddrVector &devices); |
| |
| virtual status_t setDevicesRoleForCapturePreset(audio_source_t audioSource, |
| device_role_t role, |
| const AudioDeviceTypeAddrVector &devices); |
| |
| virtual status_t addDevicesRoleForCapturePreset(audio_source_t audioSource, |
| device_role_t role, |
| const AudioDeviceTypeAddrVector &devices); |
| |
| virtual status_t removeDevicesRoleForCapturePreset( |
| audio_source_t audioSource, device_role_t role, |
| const AudioDeviceTypeAddrVector& devices); |
| |
| virtual status_t clearDevicesRoleForCapturePreset(audio_source_t audioSource, |
| device_role_t role); |
| |
| virtual status_t getDevicesForRoleAndCapturePreset(audio_source_t audioSource, |
| device_role_t role, |
| AudioDeviceTypeAddrVector &devices); |
| |
| virtual status_t startAudioSource(const struct audio_port_config *source, |
| const audio_attributes_t *attributes, |
| audio_port_handle_t *portId, |
| uid_t uid); |
| virtual status_t stopAudioSource(audio_port_handle_t portId); |
| |
| virtual status_t setMasterMono(bool mono); |
| virtual status_t getMasterMono(bool *mono); |
| virtual float getStreamVolumeDB( |
| audio_stream_type_t stream, int index, audio_devices_t device); |
| |
| virtual status_t getSurroundFormats(unsigned int *numSurroundFormats, |
| audio_format_t *surroundFormats, |
| bool *surroundFormatsEnabled); |
| virtual status_t getReportedSurroundFormats(unsigned int *numSurroundFormats, |
| audio_format_t *surroundFormats); |
| virtual status_t setSurroundFormatEnabled(audio_format_t audioFormat, bool enabled); |
| |
| virtual status_t getHwOffloadFormatsSupportedForBluetoothMedia( |
| audio_devices_t device, std::vector<audio_format_t> *formats); |
| |
| virtual void setAppState(audio_port_handle_t portId, app_state_t state); |
| |
| virtual bool isHapticPlaybackSupported(); |
| |
| virtual bool isUltrasoundSupported(); |
| |
| bool isHotwordStreamSupported(bool lookbackAudio) override; |
| |
| virtual status_t listAudioProductStrategies(AudioProductStrategyVector &strategies) |
| { |
| return mEngine->listAudioProductStrategies(strategies); |
| } |
| |
| virtual status_t getProductStrategyFromAudioAttributes( |
| const audio_attributes_t &aa, product_strategy_t &productStrategy, |
| bool fallbackOnDefault) |
| { |
| productStrategy = mEngine->getProductStrategyForAttributes(aa, fallbackOnDefault); |
| return (fallbackOnDefault && productStrategy == PRODUCT_STRATEGY_NONE) ? |
| BAD_VALUE : NO_ERROR; |
| } |
| |
| virtual status_t listAudioVolumeGroups(AudioVolumeGroupVector &groups) |
| { |
| return mEngine->listAudioVolumeGroups(groups); |
| } |
| |
| virtual status_t getVolumeGroupFromAudioAttributes( |
| const audio_attributes_t &aa, volume_group_t &volumeGroup, bool fallbackOnDefault) |
| { |
| volumeGroup = mEngine->getVolumeGroupForAttributes(aa, fallbackOnDefault); |
| return (fallbackOnDefault && volumeGroup == VOLUME_GROUP_NONE) ? |
| BAD_VALUE : NO_ERROR; |
| } |
| |
| virtual bool canBeSpatialized(const audio_attributes_t *attr, |
| const audio_config_t *config, |
| const AudioDeviceTypeAddrVector &devices) const { |
| return canBeSpatializedInt(attr, config, devices); |
| } |
| |
| virtual status_t getSpatializerOutput(const audio_config_base_t *config, |
| const audio_attributes_t *attr, |
| audio_io_handle_t *output); |
| |
| virtual status_t releaseSpatializerOutput(audio_io_handle_t output); |
| |
| virtual audio_direct_mode_t getDirectPlaybackSupport(const audio_attributes_t *attr, |
| const audio_config_t *config); |
| |
| virtual status_t getDirectProfilesForAttributes(const audio_attributes_t* attr, |
| AudioProfileVector& audioProfiles); |
| |
| status_t getSupportedMixerAttributes( |
| audio_port_handle_t portId, |
| std::vector<audio_mixer_attributes_t>& mixerAttrs) override; |
| status_t setPreferredMixerAttributes( |
| const audio_attributes_t* attr, |
| audio_port_handle_t portId, |
| uid_t uid, |
| const audio_mixer_attributes_t* mixerAttributes) override; |
| status_t getPreferredMixerAttributes(const audio_attributes_t* attr, |
| audio_port_handle_t portId, |
| audio_mixer_attributes_t* mixerAttributes) override; |
| status_t clearPreferredMixerAttributes(const audio_attributes_t* attr, |
| audio_port_handle_t portId, |
| uid_t uid) override; |
| |
| bool isCallScreenModeSupported() override; |
| |
| void onNewAudioModulesAvailable() override; |
| |
| status_t initialize(); |
| |
| protected: |
| const AudioPolicyConfig& getConfig() const { return *(mConfig.get()); } |
| |
| // From AudioPolicyManagerObserver |
| virtual const AudioPatchCollection &getAudioPatches() const |
| { |
| return mAudioPatches; |
| } |
| virtual const SoundTriggerSessionCollection &getSoundTriggerSessionCollection() const |
| { |
| return mSoundTriggerSessions; |
| } |
| virtual const AudioPolicyMixCollection &getAudioPolicyMixCollection() const |
| { |
| return mPolicyMixes; |
| } |
| virtual const SwAudioOutputCollection &getOutputs() const |
| { |
| return mOutputs; |
| } |
| virtual const AudioInputCollection &getInputs() const |
| { |
| return mInputs; |
| } |
| virtual const DeviceVector getAvailableOutputDevices() const |
| { |
| return mAvailableOutputDevices.filterForEngine(); |
| } |
| virtual const DeviceVector getAvailableInputDevices() const |
| { |
| // legacy and non-legacy remote-submix are managed by the engine, do not filter |
| return mAvailableInputDevices; |
| } |
| virtual const sp<DeviceDescriptor> &getDefaultOutputDevice() const |
| { |
| return mConfig->getDefaultOutputDevice(); |
| } |
| |
| std::vector<volume_group_t> getVolumeGroups() const |
| { |
| return mEngine->getVolumeGroups(); |
| } |
| |
| VolumeSource toVolumeSource(volume_group_t volumeGroup) const |
| { |
| return static_cast<VolumeSource>(volumeGroup); |
| } |
| /** |
| * @brief toVolumeSource converts an audio attributes into a volume source |
| * (either a legacy stream or a volume group). If fallback on default is allowed, and if |
| * the audio attributes do not follow any specific product strategy's rule, it will be |
| * associated to default volume source, e.g. music. Thus, any of call of volume API |
| * using this translation function may affect the default volume source. |
| * If fallback is not allowed and no matching rule is identified for the given attributes, |
| * the volume source will be undefined, thus, no volume will be altered/modified. |
| * @param attributes to be considered |
| * @param fallbackOnDefault |
| * @return volume source associated with given attributes, otherwise either music if |
| * fallbackOnDefault is set or none. |
| */ |
| VolumeSource toVolumeSource( |
| const audio_attributes_t &attributes, bool fallbackOnDefault = true) const |
| { |
| return toVolumeSource(mEngine->getVolumeGroupForAttributes( |
| attributes, fallbackOnDefault)); |
| } |
| VolumeSource toVolumeSource( |
| audio_stream_type_t stream, bool fallbackOnDefault = true) const |
| { |
| return toVolumeSource(mEngine->getVolumeGroupForStreamType( |
| stream, fallbackOnDefault)); |
| } |
| IVolumeCurves &getVolumeCurves(VolumeSource volumeSource) |
| { |
| auto *curves = mEngine->getVolumeCurvesForVolumeGroup( |
| static_cast<volume_group_t>(volumeSource)); |
| ALOG_ASSERT(curves != nullptr, "No curves for volume source %d", volumeSource); |
| return *curves; |
| } |
| IVolumeCurves &getVolumeCurves(const audio_attributes_t &attr) |
| { |
| auto *curves = mEngine->getVolumeCurvesForAttributes(attr); |
| ALOG_ASSERT(curves != nullptr, "No curves for attributes %s", toString(attr).c_str()); |
| return *curves; |
| } |
| IVolumeCurves &getVolumeCurves(audio_stream_type_t stream) |
| { |
| auto *curves = mEngine->getVolumeCurvesForStreamType(stream); |
| ALOG_ASSERT(curves != nullptr, "No curves for stream %s", toString(stream).c_str()); |
| return *curves; |
| } |
| |
| void addOutput(audio_io_handle_t output, const sp<SwAudioOutputDescriptor>& outputDesc); |
| void removeOutput(audio_io_handle_t output); |
| void addInput(audio_io_handle_t input, const sp<AudioInputDescriptor>& inputDesc); |
| |
| /** |
| * @brief setOutputDevices change the route of the specified output. |
| * @param outputDesc to be considered |
| * @param device to be considered to route the output |
| * @param force if true, force the routing even if no change. |
| * @param delayMs if specified, delay to apply for mute/volume op when changing device |
| * @param patchHandle if specified, the patch handle this output is connected through. |
| * @param requiresMuteCheck if specified, for e.g. when another output is on a shared device |
| * and currently active, allow to have proper drain and avoid pops |
| * @param requiresVolumeCheck true if called requires to reapply volume if the routing did |
| * not change (but the output is still routed). |
| * @param skipMuteDelay if true will skip mute delay when installing audio patch |
| * @return the number of ms we have slept to allow new routing to take effect in certain |
| * cases. |
| */ |
| uint32_t setOutputDevices(const sp<SwAudioOutputDescriptor>& outputDesc, |
| const DeviceVector &device, |
| bool force = false, |
| int delayMs = 0, |
| audio_patch_handle_t *patchHandle = NULL, |
| bool requiresMuteCheck = true, |
| bool requiresVolumeCheck = false, |
| bool skipMuteDelay = false); |
| status_t resetOutputDevice(const sp<AudioOutputDescriptor>& outputDesc, |
| int delayMs = 0, |
| audio_patch_handle_t *patchHandle = NULL); |
| status_t setInputDevice(audio_io_handle_t input, |
| const sp<DeviceDescriptor> &device, |
| bool force = false, |
| audio_patch_handle_t *patchHandle = NULL); |
| status_t resetInputDevice(audio_io_handle_t input, |
| audio_patch_handle_t *patchHandle = NULL); |
| |
| // compute the actual volume for a given stream according to the requested index and a particular |
| // device |
| virtual float computeVolume(IVolumeCurves &curves, |
| VolumeSource volumeSource, |
| int index, |
| const DeviceTypeSet& deviceTypes); |
| |
| // rescale volume index from srcStream within range of dstStream |
| int rescaleVolumeIndex(int srcIndex, |
| VolumeSource fromVolumeSource, |
| VolumeSource toVolumeSource); |
| // check that volume change is permitted, compute and send new volume to audio hardware |
| virtual status_t checkAndSetVolume(IVolumeCurves &curves, |
| VolumeSource volumeSource, int index, |
| const sp<AudioOutputDescriptor>& outputDesc, |
| DeviceTypeSet deviceTypes, |
| int delayMs = 0, bool force = false); |
| |
| void setVoiceVolume(int index, IVolumeCurves &curves, bool isVoiceVolSrc, int delayMs); |
| |
| // returns true if the supplied set of volume source and devices are consistent with |
| // call volume rules: |
| // if Bluetooth SCO and voice call use different volume curves: |
| // - do not apply voice call volume if Bluetooth SCO is used for call |
| // - do not apply Bluetooth SCO volume if SCO or Hearing Aid is not used for call. |
| // Also updates the booleans isVoiceVolSrc and isBtScoVolSrc according to the |
| // volume source supplied. |
| bool isVolumeConsistentForCalls(VolumeSource volumeSource, |
| const DeviceTypeSet& deviceTypes, |
| bool& isVoiceVolSrc, |
| bool& isBtScoVolSrc, |
| const char* caller); |
| // apply all stream volumes to the specified output and device |
| void applyStreamVolumes(const sp<AudioOutputDescriptor>& outputDesc, |
| const DeviceTypeSet& deviceTypes, |
| int delayMs = 0, bool force = false); |
| |
| /** |
| * @brief setStrategyMute Mute or unmute all active clients on the considered output |
| * following the given strategy. |
| * @param strategy to be considered |
| * @param on true for mute, false for unmute |
| * @param outputDesc to be considered |
| * @param delayMs |
| * @param device |
| */ |
| void setStrategyMute(product_strategy_t strategy, |
| bool on, |
| const sp<AudioOutputDescriptor>& outputDesc, |
| int delayMs = 0, |
| DeviceTypeSet deviceTypes = DeviceTypeSet()); |
| |
| /** |
| * @brief setVolumeSourceMute Mute or unmute the volume source on the specified output |
| * @param volumeSource to be muted/unmute (may host legacy streams or by extension set of |
| * audio attributes) |
| * @param on true to mute, false to umute |
| * @param outputDesc on which the client following the volume group shall be muted/umuted |
| * @param delayMs |
| * @param device |
| */ |
| void setVolumeSourceMute(VolumeSource volumeSource, |
| bool on, |
| const sp<AudioOutputDescriptor>& outputDesc, |
| int delayMs = 0, |
| DeviceTypeSet deviceTypes = DeviceTypeSet()); |
| |
| audio_mode_t getPhoneState(); |
| |
| // true if device is in a telephony or VoIP call |
| virtual bool isInCall() const; |
| // true if given state represents a device in a telephony or VoIP call |
| virtual bool isStateInCall(int state) const; |
| // true if playback to call TX or capture from call RX is possible |
| bool isCallAudioAccessible() const; |
| // true if device is in a telephony or VoIP call or call screening is active |
| bool isInCallOrScreening() const; |
| |
| // when a device is connected, checks if an open output can be routed |
| // to this device. If none is open, tries to open one of the available outputs. |
| // Returns an output suitable to this device or 0. |
| // when a device is disconnected, checks if an output is not used any more and |
| // returns its handle if any. |
| // transfers the audio tracks and effects from one output thread to another accordingly. |
| status_t checkOutputsForDevice(const sp<DeviceDescriptor>& device, |
| audio_policy_dev_state_t state, |
| SortedVector<audio_io_handle_t>& outputs); |
| |
| status_t checkInputsForDevice(const sp<DeviceDescriptor>& device, |
| audio_policy_dev_state_t state); |
| |
| // close an output and its companion duplicating output. |
| void closeOutput(audio_io_handle_t output); |
| |
| // close an input. |
| void closeInput(audio_io_handle_t input); |
| |
| // runs all the checks required for accommodating changes in devices and outputs |
| // if 'onOutputsChecked' callback is provided, it is executed after the outputs |
| // check via 'checkOutputForAllStrategies'. If the callback returns 'true', |
| // A2DP suspend status is rechecked. |
| void checkForDeviceAndOutputChanges(std::function<bool()> onOutputsChecked = nullptr); |
| |
| /** |
| * @brief updates routing for all outputs (including call if call in progress). |
| * @param delayMs delay for unmuting if required |
| * @param skipDelays if true all the delays will be skip while updating routing |
| */ |
| void updateCallAndOutputRouting(bool forceVolumeReeval = true, uint32_t delayMs = 0, |
| bool skipDelays = false); |
| |
| bool isCallRxAudioSource(const sp<SourceClientDescriptor> &source) { |
| return mCallRxSourceClient != nullptr && source == mCallRxSourceClient; |
| } |
| |
| bool isCallTxAudioSource(const sp<SourceClientDescriptor> &source) { |
| return mCallTxSourceClient != nullptr && source == mCallTxSourceClient; |
| } |
| |
| void connectTelephonyRxAudioSource(); |
| |
| void disconnectTelephonyAudioSource(sp<SourceClientDescriptor> &clientDesc); |
| |
| void connectTelephonyTxAudioSource(const sp<DeviceDescriptor> &srcdevice, |
| const sp<DeviceDescriptor> &sinkDevice, |
| uint32_t delayMs); |
| |
| bool isTelephonyRxOrTx(const sp<SwAudioOutputDescriptor>& desc) const { |
| return (mCallRxSourceClient != nullptr && mCallRxSourceClient->belongsToOutput(desc)) |
| || (mCallTxSourceClient != nullptr |
| && mCallTxSourceClient->belongsToOutput(desc)); |
| } |
| |
| /** |
| * @brief updates routing for all inputs. |
| */ |
| void updateInputRouting(); |
| |
| /** |
| * @brief checkOutputForAttributes checks and if necessary changes outputs used for the |
| * given audio attributes. |
| * must be called every time a condition that affects the output choice for a given |
| * attributes changes: connected device, phone state, force use... |
| * Must be called before updateDevicesAndOutputs() |
| * @param attr to be considered |
| */ |
| void checkOutputForAttributes(const audio_attributes_t &attr); |
| |
| /** |
| * @brief checkAudioSourceForAttributes checks if any AudioSource following the same routing |
| * as the given audio attributes is not routed and try to connect it. |
| * It must be called once checkOutputForAttributes has been called for orphans AudioSource, |
| * aka AudioSource not attached to any Audio Output (e.g. AudioSource connected to direct |
| * Output which has been disconnected (and output closed) due to sink device unavailable). |
| * @param attr to be considered |
| */ |
| void checkAudioSourceForAttributes(const audio_attributes_t &attr); |
| |
| bool followsSameRouting(const audio_attributes_t &lAttr, |
| const audio_attributes_t &rAttr) const; |
| |
| /** |
| * @brief checkOutputForAllStrategies Same as @see checkOutputForAttributes() |
| * but for a all product strategies in order of priority |
| */ |
| void checkOutputForAllStrategies(); |
| |
| // Same as checkOutputForStrategy but for secondary outputs. Make sure if a secondary |
| // output condition changes, the track is properly rerouted |
| void checkSecondaryOutputs(); |
| |
| // manages A2DP output suspend/restore according to phone state and BT SCO usage |
| void checkA2dpSuspend(); |
| |
| // selects the most appropriate device on output for current state |
| // must be called every time a condition that affects the device choice for a given output is |
| // changed: connected device, phone state, force use, output start, output stop.. |
| // see getDeviceForStrategy() for the use of fromCache parameter |
| DeviceVector getNewOutputDevices(const sp<SwAudioOutputDescriptor>& outputDesc, |
| bool fromCache); |
| |
| /** |
| * @brief updateDevicesAndOutputs: updates cache of devices of the engine |
| * must be called every time a condition that affects the device choice is changed: |
| * connected device, phone state, force use... |
| * cached values are used by getOutputDevicesForStream()/getDevicesForAttributes if |
| * parameter fromCache is true. |
| * Must be called after checkOutputForAllStrategies() |
| */ |
| void updateDevicesAndOutputs(); |
| |
| // selects the most appropriate device on input for current state |
| sp<DeviceDescriptor> getNewInputDevice(const sp<AudioInputDescriptor>& inputDesc); |
| |
| virtual uint32_t getMaxEffectsCpuLoad() |
| { |
| return mEffects.getMaxEffectsCpuLoad(); |
| } |
| |
| virtual uint32_t getMaxEffectsMemory() |
| { |
| return mEffects.getMaxEffectsMemory(); |
| } |
| |
| SortedVector<audio_io_handle_t> getOutputsForDevices( |
| const DeviceVector &devices, const SwAudioOutputCollection& openOutputs); |
| |
| /** |
| * @brief checkDeviceMuteStrategies mute/unmute strategies |
| * using an incompatible device combination. |
| * if muting, wait for the audio in pcm buffer to be drained before proceeding |
| * if unmuting, unmute only after the specified delay |
| * @param outputDesc |
| * @param prevDevice |
| * @param delayMs |
| * @return the number of ms waited |
| */ |
| virtual uint32_t checkDeviceMuteStrategies(const sp<AudioOutputDescriptor>& outputDesc, |
| const DeviceVector &prevDevices, |
| uint32_t delayMs); |
| |
| audio_io_handle_t selectOutput(const SortedVector<audio_io_handle_t>& outputs, |
| audio_output_flags_t flags = AUDIO_OUTPUT_FLAG_NONE, |
| audio_format_t format = AUDIO_FORMAT_INVALID, |
| audio_channel_mask_t channelMask = AUDIO_CHANNEL_NONE, |
| uint32_t samplingRate = 0, |
| audio_session_t sessionId = AUDIO_SESSION_NONE); |
| // samplingRate, format, channelMask are in/out and so may be modified |
| sp<IOProfile> getInputProfile(const sp<DeviceDescriptor> & device, |
| uint32_t& samplingRate, |
| audio_format_t& format, |
| audio_channel_mask_t& channelMask, |
| audio_input_flags_t flags); |
| /** |
| * @brief getProfileForOutput |
| * @param devices vector of descriptors, may be empty if ignoring the device is required |
| * @param samplingRate |
| * @param format |
| * @param channelMask |
| * @param flags |
| * @param directOnly |
| * @return IOProfile to be used if found, nullptr otherwise |
| */ |
| sp<IOProfile> getProfileForOutput(const DeviceVector &devices, |
| uint32_t samplingRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| audio_output_flags_t flags, |
| bool directOnly); |
| /** |
| * Same as getProfileForOutput, but it looks for an MSD profile |
| */ |
| sp<IOProfile> getMsdProfileForOutput(const DeviceVector &devices, |
| uint32_t samplingRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| audio_output_flags_t flags, |
| bool directOnly); |
| |
| audio_io_handle_t selectOutputForMusicEffects(); |
| |
| virtual status_t addAudioPatch(audio_patch_handle_t handle, const sp<AudioPatch>& patch) |
| { |
| return mAudioPatches.addAudioPatch(handle, patch); |
| } |
| virtual status_t removeAudioPatch(audio_patch_handle_t handle) |
| { |
| return mAudioPatches.removeAudioPatch(handle); |
| } |
| |
| bool isPrimaryModule(const sp<HwModule> &module) const |
| { |
| if (module == 0 || !hasPrimaryOutput()) { |
| return false; |
| } |
| return module->getHandle() == mPrimaryOutput->getModuleHandle(); |
| } |
| DeviceVector availablePrimaryOutputDevices() const |
| { |
| if (!hasPrimaryOutput()) { |
| return DeviceVector(); |
| } |
| return mAvailableOutputDevices.filter(mPrimaryOutput->supportedDevices()); |
| } |
| DeviceVector availablePrimaryModuleInputDevices() const |
| { |
| if (!hasPrimaryOutput()) { |
| return DeviceVector(); |
| } |
| return mAvailableInputDevices.getDevicesFromHwModule( |
| mPrimaryOutput->getModuleHandle()); |
| } |
| /** |
| * @brief getFirstDeviceId of the Device Vector |
| * @return if the collection is not empty, it returns the first device Id, |
| * otherwise AUDIO_PORT_HANDLE_NONE |
| */ |
| audio_port_handle_t getFirstDeviceId(const DeviceVector &devices) const |
| { |
| return (devices.size() > 0) ? devices.itemAt(0)->getId() : AUDIO_PORT_HANDLE_NONE; |
| } |
| String8 getFirstDeviceAddress(const DeviceVector &devices) const |
| { |
| return (devices.size() > 0) ? |
| String8(devices.itemAt(0)->address().c_str()) : String8(""); |
| } |
| |
| status_t updateCallRouting( |
| bool fromCache, uint32_t delayMs = 0, uint32_t *waitMs = nullptr); |
| status_t updateCallRoutingInternal( |
| const DeviceVector &rxDevices, uint32_t delayMs, uint32_t *waitMs); |
| sp<AudioPatch> createTelephonyPatch(bool isRx, const sp<DeviceDescriptor> &device, |
| uint32_t delayMs); |
| /** |
| * @brief selectBestRxSinkDevicesForCall: if the primary module host both Telephony Rx/Tx |
| * devices, and it declares also supporting a HW bridge between the Telephony Rx and the |
| * given sink device for Voice Call audio attributes, select this device in prio. |
| * Otherwise, getNewOutputDevices() is called on the primary output to select sink device. |
| * @param fromCache true to prevent engine reconsidering all product strategies and retrieve |
| * from engine cache. |
| * @return vector of devices, empty if none is found. |
| */ |
| DeviceVector selectBestRxSinkDevicesForCall(bool fromCache); |
| bool isDeviceOfModule(const sp<DeviceDescriptor>& devDesc, const char *moduleId) const; |
| |
| status_t startSource(const sp<SwAudioOutputDescriptor>& outputDesc, |
| const sp<TrackClientDescriptor>& client, |
| uint32_t *delayMs); |
| status_t stopSource(const sp<SwAudioOutputDescriptor>& outputDesc, |
| const sp<TrackClientDescriptor>& client); |
| |
| void clearAudioPatches(uid_t uid); |
| void clearSessionRoutes(uid_t uid); |
| |
| /** |
| * @brief checkStrategyRoute: when an output is beeing rerouted, reconsider each output |
| * that may host a strategy playing on the considered output. |
| * @param ps product strategy that initiated the rerouting |
| * @param ouptutToSkip output that initiated the rerouting |
| */ |
| void checkStrategyRoute(product_strategy_t ps, audio_io_handle_t ouptutToSkip); |
| |
| status_t hasPrimaryOutput() const { return mPrimaryOutput != 0; } |
| |
| status_t connectAudioSource(const sp<SourceClientDescriptor>& sourceDesc); |
| status_t disconnectAudioSource(const sp<SourceClientDescriptor>& sourceDesc); |
| |
| status_t connectAudioSourceToSink(const sp<SourceClientDescriptor>& sourceDesc, |
| const sp<DeviceDescriptor> &sinkDevice, |
| const struct audio_patch *patch, |
| audio_patch_handle_t &handle, |
| uid_t uid, uint32_t delayMs); |
| |
| sp<SourceClientDescriptor> getSourceForAttributesOnOutput(audio_io_handle_t output, |
| const audio_attributes_t &attr); |
| void clearAudioSourcesForOutput(audio_io_handle_t output); |
| |
| void cleanUpForDevice(const sp<DeviceDescriptor>& deviceDesc); |
| |
| void clearAudioSources(uid_t uid); |
| |
| static bool streamsMatchForvolume(audio_stream_type_t stream1, |
| audio_stream_type_t stream2); |
| |
| void closeActiveClients(const sp<AudioInputDescriptor>& input); |
| void closeClient(audio_port_handle_t portId); |
| |
| /** |
| * @brief isAnyDeviceTypeActive: returns true if at least one active client is routed to |
| * one of the specified devices |
| * @param deviceTypes list of devices to consider |
| */ |
| bool isAnyDeviceTypeActive(const DeviceTypeSet& deviceTypes) const; |
| /** |
| * @brief isLeUnicastActive: returns true if a call is active or at least one active client |
| * is routed to a LE unicast device |
| */ |
| bool isLeUnicastActive() const; |
| |
| void checkLeBroadcastRoutes(bool wasUnicastActive, |
| sp<SwAudioOutputDescriptor> ignoredOutput, uint32_t delayMs); |
| |
| const uid_t mUidCached; // AID_AUDIOSERVER |
| sp<const AudioPolicyConfig> mConfig; |
| EngineInstance mEngine; // Audio Policy Engine instance |
| AudioPolicyClientInterface *mpClientInterface; // audio policy client interface |
| sp<SwAudioOutputDescriptor> mPrimaryOutput; // primary output descriptor |
| // list of descriptors for outputs currently opened |
| |
| sp<SwAudioOutputDescriptor> mSpatializerOutput; |
| |
| SwAudioOutputCollection mOutputs; |
| // copy of mOutputs before setDeviceConnectionState() opens new outputs |
| // reset to mOutputs when updateDevicesAndOutputs() is called. |
| SwAudioOutputCollection mPreviousOutputs; |
| AudioInputCollection mInputs; // list of input descriptors |
| |
| DeviceVector mAvailableOutputDevices; // all available output devices |
| DeviceVector mAvailableInputDevices; // all available input devices |
| |
| bool mLimitRingtoneVolume; // limit ringtone volume to music volume if headset connected |
| |
| float mLastVoiceVolume; // last voice volume value sent to audio HAL |
| bool mA2dpSuspended; // true if A2DP output is suspended |
| |
| EffectDescriptorCollection mEffects; // list of registered audio effects |
| HwModuleCollection mHwModules; // contains modules that have been loaded successfully |
| |
| std::atomic<uint32_t> mAudioPortGeneration; |
| |
| AudioPatchCollection mAudioPatches; |
| |
| SoundTriggerSessionCollection mSoundTriggerSessions; |
| |
| HwAudioOutputCollection mHwOutputs; |
| SourceClientCollection mAudioSources; |
| |
| // for supporting "beacon" streams, i.e. streams that only play on speaker, and never |
| // when something other than STREAM_TTS (a.k.a. "Transmitted Through Speaker") is playing |
| enum { |
| STARTING_OUTPUT, |
| STARTING_BEACON, |
| STOPPING_OUTPUT, |
| STOPPING_BEACON |
| }; |
| uint32_t mBeaconMuteRefCount; // ref count for stream that would mute beacon |
| uint32_t mBeaconPlayingRefCount;// ref count for the playing beacon streams |
| bool mBeaconMuted; // has STREAM_TTS been muted |
| // true if a dedicated output for TTS stream or Ultrasound is available |
| bool mTtsOutputAvailable; |
| |
| bool mMasterMono; // true if we wish to force all outputs to mono |
| AudioPolicyMixCollection mPolicyMixes; // list of registered mixes |
| audio_io_handle_t mMusicEffectOutput; // output selected for music effects |
| |
| uint32_t nextAudioPortGeneration(); |
| |
| // Surround formats that are enabled manually. Taken into account when |
| // "encoded surround" is forced into "manual" mode. |
| std::unordered_set<audio_format_t> mManualSurroundFormats; |
| |
| std::unordered_map<uid_t, audio_flags_mask_t> mAllowedCapturePolicies; |
| |
| // The map of device descriptor and formats reported by the device. |
| std::map<wp<DeviceDescriptor>, FormatVector> mReportedFormatsMap; |
| |
| // Cached product strategy ID corresponding to legacy strategy STRATEGY_PHONE |
| product_strategy_t mCommunnicationStrategy; |
| |
| // The port handle of the hardware audio source created internally for the Call RX audio |
| // end point. |
| sp<SourceClientDescriptor> mCallRxSourceClient; |
| sp<SourceClientDescriptor> mCallTxSourceClient; |
| |
| std::map<audio_port_handle_t, |
| std::map<product_strategy_t, |
| sp<PreferredMixerAttributesInfo>>> mPreferredMixerAttrInfos; |
| |
| // Support for Multi-Stream Decoder (MSD) module |
| sp<DeviceDescriptor> getMsdAudioInDevice() const; |
| DeviceVector getMsdAudioOutDevices() const; |
| const AudioPatchCollection getMsdOutputPatches() const; |
| status_t getMsdProfiles(bool hwAvSync, |
| const InputProfileCollection &inputProfiles, |
| const OutputProfileCollection &outputProfiles, |
| const sp<DeviceDescriptor> &sourceDevice, |
| const sp<DeviceDescriptor> &sinkDevice, |
| AudioProfileVector &sourceProfiles, |
| AudioProfileVector &sinkProfiles) const; |
| status_t getBestMsdConfig(bool hwAvSync, |
| const AudioProfileVector &sourceProfiles, |
| const AudioProfileVector &sinkProfiles, |
| audio_port_config *sourceConfig, |
| audio_port_config *sinkConfig) const; |
| PatchBuilder buildMsdPatch(bool msdIsSource, const sp<DeviceDescriptor> &device) const; |
| status_t setMsdOutputPatches(const DeviceVector *outputDevices = nullptr); |
| void releaseMsdOutputPatches(const DeviceVector& devices); |
| bool msdHasPatchesToAllDevices(const AudioDeviceTypeAddrVector& devices); |
| |
| // Overload of setDeviceConnectionState() |
| status_t setDeviceConnectionState(audio_devices_t deviceType, |
| audio_policy_dev_state_t state, |
| const char* device_address, const char* device_name, |
| audio_format_t encodedFormat); |
| |
| // Called by setDeviceConnectionState() |
| status_t deviceToAudioPort(audio_devices_t deviceType, const char* device_address, |
| const char* device_name, media::AudioPortFw* aidPort); |
| bool isMsdPatch(const audio_patch_handle_t &handle) const; |
| |
| private: |
| sp<SourceClientDescriptor> startAudioSourceInternal( |
| const struct audio_port_config *source, const audio_attributes_t *attributes, |
| uid_t uid); |
| |
| void onNewAudioModulesAvailableInt(DeviceVector *newDevices); |
| |
| // Add or remove AC3 DTS encodings based on user preferences. |
| void modifySurroundFormats(const sp<DeviceDescriptor>& devDesc, FormatVector *formatsPtr); |
| void modifySurroundChannelMasks(ChannelMaskSet *channelMasksPtr); |
| |
| // If any, resolve any "dynamic" fields of the Audio Profiles collection of and IOProfile |
| void updateAudioProfiles(const sp<DeviceDescriptor>& devDesc, audio_io_handle_t ioHandle, |
| const sp<IOProfile> &profiles); |
| |
| // Notify the policy client to prepare for disconnecting external device. |
| void prepareToDisconnectExternalDevice(const sp<DeviceDescriptor> &device); |
| |
| // Notify the policy client of any change of device state with AUDIO_IO_HANDLE_NONE, |
| // so that the client interprets it as global to audio hardware interfaces. |
| // It can give a chance to HAL implementer to retrieve dynamic capabilities associated |
| // to this device for example. |
| // TODO avoid opening stream to retrieve capabilities of a profile. |
| void broadcastDeviceConnectionState(const sp<DeviceDescriptor> &device, |
| media::DeviceConnectedState state); |
| |
| // updates device caching and output for streams that can influence the |
| // routing of notifications |
| void handleNotificationRoutingForStream(audio_stream_type_t stream); |
| uint32_t curAudioPortGeneration() const { return mAudioPortGeneration; } |
| // internal method, get audio_attributes_t from either a source audio_attributes_t |
| // or audio_stream_type_t, respectively. |
| status_t getAudioAttributes(audio_attributes_t *dstAttr, |
| const audio_attributes_t *srcAttr, |
| audio_stream_type_t srcStream); |
| // internal method, called by getOutputForAttr() and connectAudioSource. |
| status_t getOutputForAttrInt(audio_attributes_t *resultAttr, |
| audio_io_handle_t *output, |
| audio_session_t session, |
| const audio_attributes_t *attr, |
| audio_stream_type_t *stream, |
| uid_t uid, |
| audio_config_t *config, |
| audio_output_flags_t *flags, |
| audio_port_handle_t *selectedDeviceId, |
| bool *isRequestedDeviceForExclusiveUse, |
| std::vector<sp<AudioPolicyMix>> *secondaryMixes, |
| output_type_t *outputType, |
| bool *isSpatialized, |
| bool *isBitPerfect); |
| // internal method to return the output handle for the given device and format |
| audio_io_handle_t getOutputForDevices( |
| const DeviceVector &devices, |
| audio_session_t session, |
| const audio_attributes_t *attr, |
| const audio_config_t *config, |
| audio_output_flags_t *flags, |
| bool *isSpatialized, |
| sp<PreferredMixerAttributesInfo> prefMixerAttrInfo = nullptr, |
| bool forceMutingHaptic = false); |
| |
| // Internal method checking if a direct output can be opened matching the requested |
| // attributes, flags, config and devices. |
| // If NAME_NOT_FOUND is returned, an attempt can be made to open a mixed output. |
| status_t openDirectOutput( |
| audio_stream_type_t stream, |
| audio_session_t session, |
| const audio_config_t *config, |
| audio_output_flags_t flags, |
| const DeviceVector &devices, |
| audio_io_handle_t *output); |
| |
| /** |
| * @brief Queries if some kind of spatialization will be performed if the audio playback |
| * context described by the provided arguments is present. |
| * The context is made of: |
| * - The audio attributes describing the playback use case. |
| * - The audio configuration describing the audio format, channels, sampling rate ... |
| * - The devices describing the sink audio device selected for playback. |
| * All arguments are optional and only the specified arguments are used to match against |
| * supported criteria. For instance, supplying no argument will tell if spatialization is |
| * supported or not in general. |
| * @param attr audio attributes describing the playback use case |
| * @param config audio configuration describing the audio format, channels, sample rate... |
| * @param devices the sink audio device selected for playback |
| * @return true if spatialization is possible for this context, false otherwise. |
| */ |
| virtual bool canBeSpatializedInt(const audio_attributes_t *attr, |
| const audio_config_t *config, |
| const AudioDeviceTypeAddrVector &devices) const; |
| |
| |
| /** |
| * @brief Gets an IOProfile for a spatializer output with the best match with |
| * provided arguments. |
| * The caller can have the devices criteria ignored by passing and empty vector, and |
| * getSpatializerOutputProfile() will ignore the devices when looking for a match. |
| * Otherwise an output profile supporting a spatializer effect that can be routed |
| * to the specified devices must exist. |
| * @param config audio configuration describing the audio format, channels, sample rate... |
| * @param devices the sink audio device selected for playback |
| * @return an IOProfile that canbe used to open a spatializer output. |
| */ |
| sp<IOProfile> getSpatializerOutputProfile(const audio_config_t *config, |
| const AudioDeviceTypeAddrVector &devices) const; |
| |
| void checkVirtualizerClientRoutes(); |
| |
| /** |
| * @brief Returns true if at least one device can only be reached via the output passed |
| * as argument. Always returns false for duplicated outputs. |
| * This can be used to decide if an output can be closed without forbidding |
| * playback to any given device. |
| * @param outputDesc the output to consider |
| * @return true if at least one device can only be reached via the output. |
| */ |
| bool isOutputOnlyAvailableRouteToSomeDevice(const sp<SwAudioOutputDescriptor>& outputDesc); |
| |
| /** |
| * @brief getInputForDevice selects an input handle for a given input device and |
| * requester context |
| * @param device to be used by requester, selected by policy mix rules or engine |
| * @param session requester session id |
| * @param uid requester uid |
| * @param attributes requester audio attributes (e.g. input source and tags matter) |
| * @param config requested audio configuration (e.g. sample rate, format, channel mask), |
| * will be updated if current configuration doesn't support but another |
| * one does |
| * @param flags requester input flags |
| * @param policyMix may be null, policy rules to be followed by the requester |
| * @return input io handle aka unique input identifier selected for this device. |
| */ |
| audio_io_handle_t getInputForDevice(const sp<DeviceDescriptor> &device, |
| audio_session_t session, |
| const audio_attributes_t &attributes, |
| audio_config_base_t *config, |
| audio_input_flags_t flags, |
| const sp<AudioPolicyMix> &policyMix); |
| |
| // event is one of STARTING_OUTPUT, STARTING_BEACON, STOPPING_OUTPUT, STOPPING_BEACON |
| // returns 0 if no mute/unmute event happened, the largest latency of the device where |
| // the mute/unmute happened |
| uint32_t handleEventForBeacon(int event); |
| uint32_t setBeaconMute(bool mute); |
| bool isValidAttributes(const audio_attributes_t *paa); |
| |
| // Called by setDeviceConnectionState(). |
| status_t setDeviceConnectionStateInt(audio_policy_dev_state_t state, |
| const android::media::audio::common::AudioPort& port, |
| audio_format_t encodedFormat); |
| status_t setDeviceConnectionStateInt(audio_devices_t deviceType, |
| audio_policy_dev_state_t state, |
| const char *device_address, |
| const char *device_name, |
| audio_format_t encodedFormat); |
| status_t setDeviceConnectionStateInt(const sp<DeviceDescriptor> &device, |
| audio_policy_dev_state_t state); |
| |
| void setEngineDeviceConnectionState(const sp<DeviceDescriptor> device, |
| audio_policy_dev_state_t state); |
| |
| void updateMono(audio_io_handle_t output) { |
| AudioParameter param; |
| param.addInt(String8(AudioParameter::keyMonoOutput), (int)mMasterMono); |
| mpClientInterface->setParameters(output, param.toString()); |
| } |
| |
| /** |
| * @brief createAudioPatchInternal internal function to manage audio patch creation |
| * @param[in] patch structure containing sink and source ports configuration |
| * @param[out] handle patch handle to be provided if patch installed correctly |
| * @param[in] uid of the client |
| * @param[in] delayMs if required |
| * @param[in] sourceDesc source client to be configured when creating the patch, i.e. |
| * assigning an Output (HW or SW) used for volume control. |
| * @return NO_ERROR if patch installed correctly, error code otherwise. |
| */ |
| status_t createAudioPatchInternal(const struct audio_patch *patch, |
| audio_patch_handle_t *handle, |
| uid_t uid, uint32_t delayMs, |
| const sp<SourceClientDescriptor>& sourceDesc); |
| /** |
| * @brief releaseAudioPatchInternal internal function to remove an audio patch |
| * @param[in] handle of the patch to be removed |
| * @param[in] delayMs if required |
| * @param[in] sourceDesc [optional] in case of external source, source client to be |
| * unrouted from the patch, i.e. assigning an Output (HW or SW) |
| * @return NO_ERROR if patch removed correctly, error code otherwise. |
| */ |
| status_t releaseAudioPatchInternal(audio_patch_handle_t handle, |
| uint32_t delayMs = 0, |
| const sp<SourceClientDescriptor>& sourceDesc = nullptr); |
| |
| status_t installPatch(const char *caller, |
| audio_patch_handle_t *patchHandle, |
| AudioIODescriptorInterface *ioDescriptor, |
| const struct audio_patch *patch, |
| int delayMs); |
| status_t installPatch(const char *caller, |
| ssize_t index, |
| audio_patch_handle_t *patchHandle, |
| const struct audio_patch *patch, |
| int delayMs, |
| uid_t uid, |
| sp<AudioPatch> *patchDescPtr); |
| |
| bool areAllDevicesSupported( |
| const AudioDeviceTypeAddrVector& devices, |
| std::function<bool(audio_devices_t)> predicate, |
| const char* context, |
| bool matchAddress = true); |
| |
| /** |
| * @brief changeOutputDevicesMuteState mute/unmute devices using checkDeviceMuteStrategies |
| * @param devices devices to mute/unmute |
| */ |
| void changeOutputDevicesMuteState(const AudioDeviceTypeAddrVector& devices); |
| |
| /** |
| * @brief Returns a vector of software output descriptor that support the queried devices |
| * @param devices devices to query |
| * @param openOutputs open outputs where the devices are supported as determined by |
| * SwAudioOutputDescriptor::supportsAtLeastOne |
| */ |
| std::vector<sp<SwAudioOutputDescriptor>> getSoftwareOutputsForDevices( |
| const AudioDeviceTypeAddrVector& devices) const; |
| |
| bool isScoRequestedForComm() const; |
| |
| bool isHearingAidUsedForComm() const; |
| |
| bool areAllActiveTracksRerouted(const sp<SwAudioOutputDescriptor>& output); |
| |
| /** |
| * @brief Opens an output stream from the supplied IOProfile and route it to the |
| * supplied audio devices. If a mixer config is specified, it is forwarded to audio |
| * flinger. If not, a default config is derived from the output stream config. |
| * Also opens a duplicating output if needed and queries the audio HAL for supported |
| * audio profiles if the IOProfile is dynamic. |
| * @param[in] profile IOProfile to use as template |
| * @param[in] devices initial route to apply to this output stream |
| * @param[in] mixerConfig if not null, use this to configure the mixer |
| * @param[in] halConfig if not null, use this to configure the HAL |
| * @param[in] flags the flags to be used to open the output |
| * @return an output descriptor for the newly opened stream or null in case of error. |
| */ |
| sp<SwAudioOutputDescriptor> openOutputWithProfileAndDevice( |
| const sp<IOProfile>& profile, const DeviceVector& devices, |
| const audio_config_base_t *mixerConfig = nullptr, |
| const audio_config_t *halConfig = nullptr, |
| audio_output_flags_t flags = AUDIO_OUTPUT_FLAG_NONE); |
| |
| bool isOffloadPossible(const audio_offload_info_t& offloadInfo, |
| bool durationIgnored = false); |
| |
| // adds the profiles from the outputProfile to the passed audioProfilesVector |
| // without duplicating them if already present |
| void addPortProfilesToVector(sp<IOProfile> outputProfile, |
| AudioProfileVector& audioProfilesVector); |
| |
| // Searches for a compatible profile with the sample rate, audio format and channel mask |
| // in the list of passed HwModule(s). |
| // returns a compatible profile if found, nullptr otherwise |
| sp<IOProfile> searchCompatibleProfileHwModules ( |
| const HwModuleCollection& hwModules, |
| const DeviceVector& devices, |
| uint32_t samplingRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| audio_output_flags_t flags, |
| bool directOnly); |
| |
| // Filters only the relevant flags for getProfileForOutput |
| audio_output_flags_t getRelevantFlags (audio_output_flags_t flags, bool directOnly); |
| |
| status_t getDevicesForAttributes(const audio_attributes_t &attr, |
| DeviceVector &devices, |
| bool forVolume); |
| |
| status_t getProfilesForDevices(const DeviceVector& devices, |
| AudioProfileVector& audioProfiles, |
| uint32_t flags, |
| bool isInput); |
| |
| /** |
| * Returns the preferred mixer attributes info for the given device port id and strategy. |
| * Bit-perfect mixer attributes will be returned if it is active and |
| * `activeBitPerfectPreferred` is true. |
| */ |
| sp<PreferredMixerAttributesInfo> getPreferredMixerAttributesInfo( |
| audio_port_handle_t devicePortId, |
| product_strategy_t strategy, |
| bool activeBitPerfectPreferred = false); |
| |
| sp<SwAudioOutputDescriptor> reopenOutput( |
| sp<SwAudioOutputDescriptor> outputDesc, |
| const audio_config_t *config, |
| audio_output_flags_t flags, |
| const char* caller); |
| |
| void reopenOutputsWithDevices( |
| const std::map<audio_io_handle_t, DeviceVector>& outputsToReopen); |
| |
| PortHandleVector getClientsForStream(audio_stream_type_t streamType) const; |
| void invalidateStreams(StreamTypeVector streams) const; |
| }; |
| |
| }; |