| ChangeLog for wpa_supplicant |
| |
| 2022-01-16 - v2.10 |
| * SAE changes |
| - improved protection against side channel attacks |
| [https://w1.fi/security/2022-1/] |
| - added support for the hash-to-element mechanism (sae_pwe=1 or |
| sae_pwe=2); this is currently disabled by default, but will likely |
| get enabled by default in the future |
| - fixed PMKSA caching with OKC |
| - added support for SAE-PK |
| * EAP-pwd changes |
| - improved protection against side channel attacks |
| [https://w1.fi/security/2022-1/] |
| * fixed P2P provision discovery processing of a specially constructed |
| invalid frame |
| [https://w1.fi/security/2021-1/] |
| * fixed P2P group information processing of a specially constructed |
| invalid frame |
| [https://w1.fi/security/2020-2/] |
| * fixed PMF disconnection protection bypass in AP mode |
| [https://w1.fi/security/2019-7/] |
| * added support for using OpenSSL 3.0 |
| * increased the maximum number of EAP message exchanges (mainly to |
| support cases with very large certificates) |
| * fixed various issues in experimental support for EAP-TEAP peer |
| * added support for DPP release 2 (Wi-Fi Device Provisioning Protocol) |
| * a number of MKA/MACsec fixes and extensions |
| * added support for SAE (WPA3-Personal) AP mode configuration |
| * added P2P support for EDMG (IEEE 802.11ay) channels |
| * fixed EAP-FAST peer with TLS GCM/CCM ciphers |
| * improved throughput estimation and BSS selection |
| * dropped support for libnl 1.1 |
| * added support for nl80211 control port for EAPOL frame TX/RX |
| * fixed OWE key derivation with groups 20 and 21; this breaks backwards |
| compatibility for these groups while the default group 19 remains |
| backwards compatible |
| * added support for Beacon protection |
| * added support for Extended Key ID for pairwise keys |
| * removed WEP support from the default build (CONFIG_WEP=y can be used |
| to enable it, if really needed) |
| * added a build option to remove TKIP support (CONFIG_NO_TKIP=y) |
| * added support for Transition Disable mechanism to allow the AP to |
| automatically disable transition mode to improve security |
| * extended D-Bus interface |
| * added support for PASN |
| * added a file-based backend for external password storage to allow |
| secret information to be moved away from the main configuration file |
| without requiring external tools |
| * added EAP-TLS peer support for TLS 1.3 (disabled by default for now) |
| * added support for SCS, MSCS, DSCP policy |
| * changed driver interface selection to default to automatic fallback |
| to other compiled in options |
| * a large number of other fixes, cleanup, and extensions |
| |
| 2019-08-07 - v2.9 |
| * SAE changes |
| - disable use of groups using Brainpool curves |
| - improved protection against side channel attacks |
| [https://w1.fi/security/2019-6/] |
| * EAP-pwd changes |
| - disable use of groups using Brainpool curves |
| - allow the set of groups to be configured (eap_pwd_groups) |
| - improved protection against side channel attacks |
| [https://w1.fi/security/2019-6/] |
| * fixed FT-EAP initial mobility domain association using PMKSA caching |
| (disabled by default for backwards compatibility; can be enabled |
| with ft_eap_pmksa_caching=1) |
| * fixed a regression in OpenSSL 1.1+ engine loading |
| * added validation of RSNE in (Re)Association Response frames |
| * fixed DPP bootstrapping URI parser of channel list |
| * extended EAP-SIM/AKA fast re-authentication to allow use with FILS |
| * extended ca_cert_blob to support PEM format |
| * improved robustness of P2P Action frame scheduling |
| * added support for EAP-SIM/AKA using anonymous@realm identity |
| * fixed Hotspot 2.0 credential selection based on roaming consortium |
| to ignore credentials without a specific EAP method |
| * added experimental support for EAP-TEAP peer (RFC 7170) |
| * added experimental support for EAP-TLS peer with TLS v1.3 |
| * fixed a regression in WMM parameter configuration for a TDLS peer |
| * fixed a regression in operation with drivers that offload 802.1X |
| 4-way handshake |
| * fixed an ECDH operation corner case with OpenSSL |
| |
| 2019-04-21 - v2.8 |
| * SAE changes |
| - added support for SAE Password Identifier |
| - changed default configuration to enable only groups 19, 20, 21 |
| (i.e., disable groups 25 and 26) and disable all unsuitable groups |
| completely based on REVmd changes |
| - do not regenerate PWE unnecessarily when the AP uses the |
| anti-clogging token mechanisms |
| - fixed some association cases where both SAE and FT-SAE were enabled |
| on both the station and the selected AP |
| - started to prefer FT-SAE over SAE AKM if both are enabled |
| - started to prefer FT-SAE over FT-PSK if both are enabled |
| - fixed FT-SAE when SAE PMKSA caching is used |
| - reject use of unsuitable groups based on new implementation guidance |
| in REVmd (allow only FFC groups with prime >= 3072 bits and ECC |
| groups with prime >= 256) |
| - minimize timing and memory use differences in PWE derivation |
| [https://w1.fi/security/2019-1/] (CVE-2019-9494) |
| * EAP-pwd changes |
| - minimize timing and memory use differences in PWE derivation |
| [https://w1.fi/security/2019-2/] (CVE-2019-9495) |
| - verify server scalar/element |
| [https://w1.fi/security/2019-4/] (CVE-2019-9499) |
| - fix message reassembly issue with unexpected fragment |
| [https://w1.fi/security/2019-5/] |
| - enforce rand,mask generation rules more strictly |
| - fix a memory leak in PWE derivation |
| - disallow ECC groups with a prime under 256 bits (groups 25, 26, and |
| 27) |
| * fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y |
| * Hotspot 2.0 changes |
| - do not indicate release number that is higher than the one |
| AP supports |
| - added support for release number 3 |
| - enable PMF automatically for network profiles created from |
| credentials |
| * fixed OWE network profile saving |
| * fixed DPP network profile saving |
| * added support for RSN operating channel validation |
| (CONFIG_OCV=y and network profile parameter ocv=1) |
| * added Multi-AP backhaul STA support |
| * fixed build with LibreSSL |
| * number of MKA/MACsec fixes and extensions |
| * extended domain_match and domain_suffix_match to allow list of values |
| * fixed dNSName matching in domain_match and domain_suffix_match when |
| using wolfSSL |
| * started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both |
| are enabled |
| * extended nl80211 Connect and external authentication to support |
| SAE, FT-SAE, FT-EAP-SHA384 |
| * fixed KEK2 derivation for FILS+FT |
| * extended client_cert file to allow loading of a chain of PEM |
| encoded certificates |
| * extended beacon reporting functionality |
| * extended D-Bus interface with number of new properties |
| * fixed a regression in FT-over-DS with mac80211-based drivers |
| * OpenSSL: allow systemwide policies to be overridden |
| * extended driver flags indication for separate 802.1X and PSK |
| 4-way handshake offload capability |
| * added support for random P2P Device/Interface Address use |
| * extended PEAP to derive EMSK to enable use with ERP/FILS |
| * extended WPS to allow SAE configuration to be added automatically |
| for PSK (wps_cred_add_sae=1) |
| * removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS) |
| * extended domain_match and domain_suffix_match to allow list of values |
| * added a RSN workaround for misbehaving PMF APs that advertise |
| IGTK/BIP KeyID using incorrect byte order |
| * fixed PTK rekeying with FILS and FT |
| |
| 2018-12-02 - v2.7 |
| * fixed WPA packet number reuse with replayed messages and key |
| reinstallation |
| [https://w1.fi/security/2017-1/] (CVE-2017-13077, CVE-2017-13078, |
| CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, |
| CVE-2017-13086, CVE-2017-13087, CVE-2017-13088) |
| * fixed unauthenticated EAPOL-Key decryption in wpa_supplicant |
| [https://w1.fi/security/2018-1/] (CVE-2018-14526) |
| * added support for FILS (IEEE 802.11ai) shared key authentication |
| * added support for OWE (Opportunistic Wireless Encryption, RFC 8110; |
| and transition mode defined by WFA) |
| * added support for DPP (Wi-Fi Device Provisioning Protocol) |
| * added support for RSA 3k key case with Suite B 192-bit level |
| * fixed Suite B PMKSA caching not to update PMKID during each 4-way |
| handshake |
| * fixed EAP-pwd pre-processing with PasswordHashHash |
| * added EAP-pwd client support for salted passwords |
| * fixed a regression in TDLS prohibited bit validation |
| * started to use estimated throughput to avoid undesired signal |
| strength based roaming decision |
| * MACsec/MKA: |
| - new macsec_linux driver interface support for the Linux |
| kernel macsec module |
| - number of fixes and extensions |
| * added support for external persistent storage of PMKSA cache |
| (PMKSA_GET/PMKSA_ADD control interface commands; and |
| MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case) |
| * fixed mesh channel configuration pri/sec switch case |
| * added support for beacon report |
| * large number of other fixes, cleanup, and extensions |
| * added support for randomizing local address for GAS queries |
| (gas_rand_mac_addr parameter) |
| * fixed EAP-SIM/AKA/AKA' ext auth cases within TLS tunnel |
| * added option for using random WPS UUID (auto_uuid=1) |
| * added SHA256-hash support for OCSP certificate matching |
| * fixed EAP-AKA' to add AT_KDF into Synchronization-Failure |
| * fixed a regression in RSN pre-authentication candidate selection |
| * added option to configure allowed group management cipher suites |
| (group_mgmt network profile parameter) |
| * removed all PeerKey functionality |
| * fixed nl80211 AP and mesh mode configuration regression with |
| Linux 4.15 and newer |
| * added ap_isolate configuration option for AP mode |
| * added support for nl80211 to offload 4-way handshake into the driver |
| * added support for using wolfSSL cryptographic library |
| * SAE |
| - added support for configuring SAE password separately of the |
| WPA2 PSK/passphrase |
| - fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection |
| for SAE; |
| note: this is not backwards compatible, i.e., both the AP and |
| station side implementations will need to be update at the same |
| time to maintain interoperability |
| - added support for Password Identifier |
| - fixed FT-SAE PMKID matching |
| * Hotspot 2.0 |
| - added support for fetching of Operator Icon Metadata ANQP-element |
| - added support for Roaming Consortium Selection element |
| - added support for Terms and Conditions |
| - added support for OSEN connection in a shared RSN BSS |
| - added support for fetching Venue URL information |
| * added support for using OpenSSL 1.1.1 |
| * FT |
| - disabled PMKSA caching with FT since it is not fully functional |
| - added support for SHA384 based AKM |
| - added support for BIP ciphers BIP-CMAC-256, BIP-GMAC-128, |
| BIP-GMAC-256 in addition to previously supported BIP-CMAC-128 |
| - fixed additional IE inclusion in Reassociation Request frame when |
| using FT protocol |
| |
| 2016-10-02 - v2.6 |
| * fixed WNM Sleep Mode processing when PMF is not enabled |
| [http://w1.fi/security/2015-6/] (CVE-2015-5310) |
| * fixed EAP-pwd last fragment validation |
| [http://w1.fi/security/2015-7/] (CVE-2015-5315) |
| * fixed EAP-pwd unexpected Confirm message processing |
| [http://w1.fi/security/2015-8/] (CVE-2015-5316) |
| * fixed WPS configuration update vulnerability with malformed passphrase |
| [http://w1.fi/security/2016-1/] (CVE-2016-4476) |
| * fixed configuration update vulnerability with malformed parameters set |
| over the local control interface |
| [http://w1.fi/security/2016-1/] (CVE-2016-4477) |
| * fixed TK configuration to the driver in EAPOL-Key 3/4 retry case |
| * extended channel switch support for P2P GO |
| * started to throttle control interface event message bursts to avoid |
| issues with monitor sockets running out of buffer space |
| * mesh mode fixes/improvements |
| - generate proper AID for peer |
| - enable WMM by default |
| - add VHT support |
| - fix PMKID derivation |
| - improve robustness on various exchanges |
| - fix peer link counting in reconnect case |
| - improve mesh joining behavior |
| - allow DTIM period to be configured |
| - allow HT to be disabled (disable_ht=1) |
| - add MESH_PEER_ADD and MESH_PEER_REMOVE commands |
| - add support for PMKSA caching |
| - add minimal support for SAE group negotiation |
| - allow pairwise/group cipher to be configured in the network profile |
| - use ieee80211w profile parameter to enable/disable PMF and derive |
| a separate TX IGTK if PMF is enabled instead of using MGTK |
| incorrectly |
| - fix AEK and MTK derivation |
| - remove GTKdata and IGTKdata from Mesh Peering Confirm/Close |
| - note: these changes are not fully backwards compatible for secure |
| (RSN) mesh network |
| * fixed PMKID derivation with SAE |
| * added support for requesting and fetching arbitrary ANQP-elements |
| without internal support in wpa_supplicant for the specific element |
| (anqp[265]=<hexdump> in "BSS <BSSID>" command output) |
| * P2P |
| - filter control characters in group client device names to be |
| consistent with other P2P peer cases |
| - support VHT 80+80 MHz and 160 MHz |
| - indicate group completion in P2P Client role after data association |
| instead of already after the WPS provisioning step |
| - improve group-join operation to use SSID, if known, to filter BSS |
| entries |
| - added optional ssid=<hexdump> argument to P2P_CONNECT for join case |
| - added P2P_GROUP_MEMBER command to fetch client interface address |
| * P2PS |
| - fix follow-on PD Response behavior |
| - fix PD Response generation for unknown peer |
| - fix persistent group reporting |
| - add channel policy to PD Request |
| - add group SSID to the P2PS-PROV-DONE event |
| - allow "P2P_CONNECT <addr> p2ps" to be used without specifying the |
| default PIN |
| * BoringSSL |
| - support for OCSP stapling |
| - support building of h20-osu-client |
| * D-Bus |
| - add ExpectDisconnect() |
| - add global config parameters as properties |
| - add SaveConfig() |
| - add VendorElemAdd(), VendorElemGet(), VendorElemRem() |
| * fixed Suite B 192-bit AKM to use proper PMK length |
| (note: this makes old releases incompatible with the fixed behavior) |
| * improved PMF behavior for cases where the AP and STA has different |
| configuration by not trying to connect in some corner cases where the |
| connection cannot succeed |
| * added option to reopen debug log (e.g., to rotate the file) upon |
| receipt of SIGHUP signal |
| * EAP-pwd: added support for Brainpool Elliptic Curves |
| (with OpenSSL 1.0.2 and newer) |
| * fixed EAPOL reauthentication after FT protocol run |
| * fixed FTIE generation for 4-way handshake after FT protocol run |
| * extended INTERFACE_ADD command to allow certain type (sta/ap) |
| interface to be created |
| * fixed and improved various FST operations |
| * added 80+80 MHz and 160 MHz VHT support for IBSS/mesh |
| * fixed SIGNAL_POLL in IBSS and mesh cases |
| * added an option to abort an ongoing scan (used to speed up connection |
| and can also be done with the new ABORT_SCAN command) |
| * TLS client |
| - do not verify CA certificates when ca_cert is not specified |
| - support validating server certificate hash |
| - support SHA384 and SHA512 hashes |
| - add signature_algorithms extension into ClientHello |
| - support TLS v1.2 signature algorithm with SHA384 and SHA512 |
| - support server certificate probing |
| - allow specific TLS versions to be disabled with phase2 parameter |
| - support extKeyUsage |
| - support PKCS #5 v2.0 PBES2 |
| - support PKCS #5 with PKCS #12 style key decryption |
| - minimal support for PKCS #12 |
| - support OCSP stapling (including ocsp_multi) |
| * OpenSSL |
| - support OpenSSL 1.1 API changes |
| - drop support for OpenSSL 0.9.8 |
| - drop support for OpenSSL 1.0.0 |
| * added support for multiple schedule scan plans (sched_scan_plans) |
| * added support for external server certificate chain validation |
| (tls_ext_cert_check=1 in the network profile phase1 parameter) |
| * made phase2 parser more strict about correct use of auth=<val> and |
| autheap=<val> values |
| * improved GAS offchannel operations with comeback request |
| * added SIGNAL_MONITOR command to request signal strength monitoring |
| events |
| * added command for retrieving HS 2.0 icons with in-memory storage |
| (REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and |
| RX-HS20-ICON event) |
| * enabled ACS support for AP mode operations with wpa_supplicant |
| * EAP-PEAP: fixed interoperability issue with Windows 2012r2 server |
| ("Invalid Compound_MAC in cryptobinding TLV") |
| * EAP-TTLS: fixed success after fragmented final Phase 2 message |
| * VHT: added interoperability workaround for 80+80 and 160 MHz channels |
| * WNM: workaround for broken AP operating class behavior |
| * added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE) |
| * nl80211: |
| - add support for full station state operations |
| - do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled |
| - add NL80211_ATTR_PREV_BSSID with Connect command |
| - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use |
| unencrypted EAPOL frames |
| * added initial MBO support; number of extensions to WNM BSS Transition |
| Management |
| * added support for PBSS/PCP and P2P on 60 GHz |
| * Interworking: add credential realm to EAP-TLS identity |
| * fixed EAPOL-Key Request Secure bit to be 1 if PTK is set |
| * HS 2.0: add support for configuring frame filters |
| * added POLL_STA command to check connectivity in AP mode |
| * added initial functionality for location related operations |
| * started to ignore pmf=1/2 parameter for non-RSN networks |
| * added wps_disabled=1 network profile parameter to allow AP mode to |
| be started without enabling WPS |
| * wpa_cli: added action script support for AP-ENABLED and AP-DISABLED |
| events |
| * improved Public Action frame addressing |
| - add gas_address3 configuration parameter to control Address 3 |
| behavior |
| * number of small fixes |
| |
| 2015-09-27 - v2.5 |
| * fixed P2P validation of SSID element length before copying it |
| [http://w1.fi/security/2015-1/] (CVE-2015-1863) |
| * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding |
| [http://w1.fi/security/2015-2/] (CVE-2015-4141) |
| * fixed WMM Action frame parser (AP mode) |
| [http://w1.fi/security/2015-3/] (CVE-2015-4142) |
| * fixed EAP-pwd peer missing payload length validation |
| [http://w1.fi/security/2015-4/] |
| (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146) |
| * fixed validation of WPS and P2P NFC NDEF record payload length |
| [http://w1.fi/security/2015-5/] |
| * nl80211: |
| - added VHT configuration for IBSS |
| - fixed vendor command handling to check OUI properly |
| - allow driver-based roaming to change ESS |
| * added AVG_BEACON_RSSI to SIGNAL_POLL output |
| * wpa_cli: added tab completion for number of commands |
| * removed unmaintained and not yet completed SChannel/CryptoAPI support |
| * modified Extended Capabilities element use in Probe Request frames to |
| include all cases if any of the values are non-zero |
| * added support for dynamically creating/removing a virtual interface |
| with interface_add/interface_remove |
| * added support for hashed password (NtHash) in EAP-pwd peer |
| * added support for memory-only PSK/passphrase (mem_only_psk=1 and |
| CTRL-REQ/RSP-PSK_PASSPHRASE) |
| * P2P |
| - optimize scan frequencies list when re-joining a persistent group |
| - fixed number of sequences with nl80211 P2P Device interface |
| - added operating class 125 for P2P use cases (this allows 5 GHz |
| channels 161 and 169 to be used if they are enabled in the current |
| regulatory domain) |
| - number of fixes to P2PS functionality |
| - do not allow 40 MHz co-ex PRI/SEC switch to force MCC |
| - extended support for preferred channel listing |
| * D-Bus: |
| - fixed WPS property of fi.w1.wpa_supplicant1.BSS interface |
| - fixed PresenceRequest to use group interface |
| - added new signals: FindStopped, WPS pbc-overlap, |
| GroupFormationFailure, WPS timeout, InvitationReceived |
| - added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient |
| - added manufacturer info |
| * added EAP-EKE peer support for deriving Session-Id |
| * added wps_priority configuration parameter to set the default priority |
| for all network profiles added by WPS |
| * added support to request a scan with specific SSIDs with the SCAN |
| command (optional "ssid <hexdump>" arguments) |
| * removed support for WEP40/WEP104 as a group cipher with WPA/WPA2 |
| * fixed SAE group selection in an error case |
| * modified SAE routines to be more robust and PWE generation to be |
| stronger against timing attacks |
| * added support for Brainpool Elliptic Curves with SAE |
| * added support for CCMP-256 and GCMP-256 as group ciphers with FT |
| * fixed BSS selection based on estimated throughput |
| * added option to disable TLSv1.0 with OpenSSL |
| (phase1="tls_disable_tlsv1_0=1") |
| * added Fast Session Transfer (FST) module |
| * fixed OpenSSL PKCS#12 extra certificate handling |
| * fixed key derivation for Suite B 192-bit AKM (this breaks |
| compatibility with the earlier version) |
| * added RSN IE to Mesh Peering Open/Confirm frames |
| * number of small fixes |
| |
| 2015-03-15 - v2.4 |
| * allow OpenSSL cipher configuration to be set for internal EAP server |
| (openssl_ciphers parameter) |
| * fixed number of small issues based on hwsim test case failures and |
| static analyzer reports |
| * P2P: |
| - add new=<0/1> flag to P2P-DEVICE-FOUND events |
| - add passive channels in invitation response from P2P Client |
| - enable nl80211 P2P_DEVICE support by default |
| - fix regresssion in disallow_freq preventing search on social |
| channels |
| - fix regressions in P2P SD query processing |
| - try to re-invite with social operating channel if no common channels |
| in invitation |
| - allow cross connection on parent interface (this fixes number of |
| use cases with nl80211) |
| - add support for P2P services (P2PS) |
| - add p2p_go_ctwindow configuration parameter to allow GO CTWindow to |
| be configured |
| * increase postponing of EAPOL-Start by one second with AP/GO that |
| supports WPS 2.0 (this makes it less likely to trigger extra roundtrip |
| of identity frames) |
| * add support for PMKSA caching with SAE |
| * add support for control mesh BSS (IEEE 802.11s) operations |
| * fixed number of issues with D-Bus P2P commands |
| * fixed regression in ap_scan=2 special case for WPS |
| * fixed macsec_validate configuration |
| * add a workaround for incorrectly behaving APs that try to use |
| EAPOL-Key descriptor version 3 when the station supports PMF even if |
| PMF is not enabled on the AP |
| * allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior |
| of disabling these can be configured to work around issues with broken |
| servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1" |
| * add support for Suite B (128-bit and 192-bit level) key management and |
| cipher suites |
| * add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS) |
| * improved BSS Transition Management processing |
| * add support for neighbor report |
| * add support for link measurement |
| * fixed expiration of BSS entry with all-zeros BSSID |
| * add optional LAST_ID=x argument to LIST_NETWORK to allow all |
| configured networks to be listed even with huge number of network |
| profiles |
| * add support for EAP Re-Authentication Protocol (ERP) |
| * fixed EAP-IKEv2 fragmentation reassembly |
| * improved PKCS#11 configuration for OpenSSL |
| * set stdout to be line-buffered |
| * add TDLS channel switch configuration |
| * add support for MAC address randomization in scans with nl80211 |
| * enable HT for IBSS if supported by the driver |
| * add BSSID black and white lists (bssid_blacklist, bssid_whitelist) |
| * add support for domain_suffix_match with GnuTLS |
| * add OCSP stapling client support with GnuTLS |
| * include peer certificate in EAP events even without a separate probe |
| operation; old behavior can be restored with cert_in_cb=0 |
| * add peer ceritficate alt subject name to EAP events |
| (CTRL-EVENT-EAP-PEER-ALT) |
| * add domain_match network profile parameter (similar to |
| domain_suffix_match, but full match is required) |
| * enable AP/GO mode HT Tx STBC automatically based on driver support |
| * add ANQP-QUERY-DONE event to provide information on ANQP parsing |
| status |
| * allow passive scanning to be forced with passive_scan=1 |
| * add a workaround for Linux packet socket behavior when interface is in |
| bridge |
| * increase 5 GHz band preference in BSS selection (estimate SNR, if info |
| not available from driver; estimate maximum throughput based on common |
| HT/VHT/specific TX rate support) |
| * add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to |
| implement Interworking network selection behavior in upper layers |
| software components |
| * add optional reassoc_same_bss_optim=1 (disabled by default) |
| optimization to avoid unnecessary Authentication frame exchange |
| * extend TDLS frame padding workaround to cover all packets |
| * allow wpa_supplicant to recover nl80211 functionality if the cfg80211 |
| module gets removed and reloaded without restarting wpa_supplicant |
| * allow hostapd DFS implementation to be used in wpa_supplicant AP mode |
| |
| 2014-10-09 - v2.3 |
| * fixed number of minor issues identified in static analyzer warnings |
| * fixed wfd_dev_info to be more careful and not read beyond the buffer |
| when parsing invalid information for P2P-DEVICE-FOUND |
| * extended P2P and GAS query operations to support drivers that have |
| maximum remain-on-channel time below 1000 ms (500 ms is the current |
| minimum supported value) |
| * added p2p_search_delay parameter to make the default p2p_find delay |
| configurable |
| * improved P2P operating channel selection for various multi-channel |
| concurrency cases |
| * fixed some TDLS failure cases to clean up driver state |
| * fixed dynamic interface addition cases with nl80211 to avoid adding |
| ifindex values to incorrect interface to skip foreign interface events |
| properly |
| * added TDLS workaround for some APs that may add extra data to the |
| end of a short frame |
| * fixed EAP-AKA' message parser with multiple AT_KDF attributes |
| * added configuration option (p2p_passphrase_len) to allow longer |
| passphrases to be generated for P2P groups |
| * fixed IBSS channel configuration in some corner cases |
| * improved HT/VHT/QoS parameter setup for TDLS |
| * modified D-Bus interface for P2P peers/groups |
| * started to use constant time comparison for various password and hash |
| values to reduce possibility of any externally measurable timing |
| differences |
| * extended explicit clearing of freed memory and expired keys to avoid |
| keeping private data in memory longer than necessary |
| * added optional scan_id parameter to the SCAN command to allow manual |
| scan requests for active scans for specific configured SSIDs |
| * fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value |
| * added option to set Hotspot 2.0 Rel 2 update_identifier in network |
| configuration to support external configuration |
| * modified Android PNO functionality to send Probe Request frames only |
| for hidden SSIDs (based on scan_ssid=1) |
| * added generic mechanism for adding vendor elements into frames at |
| runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE) |
| * added fields to show unrecognized vendor elements in P2P_PEER |
| * removed EAP-TTLS/MSCHAPv2 interoperability workaround so that |
| MS-CHAP2-Success is required to be present regardless of |
| eap_workaround configuration |
| * modified EAP fast session resumption to allow results to be used only |
| with the same network block that generated them |
| * extended freq_list configuration to apply for sched_scan as well as |
| normal scan |
| * modified WPS to merge mixed-WPA/WPA2 credentials from a single session |
| * fixed nl80211/RTM_DELLINK processing when a P2P GO interface is |
| removed from a bridge |
| * fixed number of small P2P issues to make negotiations more robust in |
| corner cases |
| * added experimental support for using temporary, random local MAC |
| address (mac_addr and preassoc_mac_addr parameters); this is disabled |
| by default (i.e., previous behavior of using permanent address is |
| maintained if configuration is not changed) |
| * added D-Bus interface for setting/clearing WFD IEs |
| * fixed TDLS AID configuration for VHT |
| * modified -m<conf> configuration file to be used only for the P2P |
| non-netdev management device and do not load this for the default |
| station interface or load the station interface configuration for |
| the P2P management interface |
| * fixed external MAC address changes while wpa_supplicant is running |
| * started to enable HT (if supported by the driver) for IBSS |
| * fixed wpa_cli action script execution to use more robust mechanism |
| (CVE-2014-3686) |
| |
| 2014-06-04 - v2.2 |
| * added DFS indicator to get_capability freq |
| * added/fixed nl80211 functionality |
| - BSSID/frequency hint for driver-based BSS selection |
| - fix tearing down WDS STA interfaces |
| - support vendor specific driver command |
| (VENDOR <vendor id> <sub command id> [<hex formatted data>]) |
| - GO interface teardown optimization |
| - allow beacon interval to be configured for IBSS |
| - add SHA256-based AKM suites to CONNECT/ASSOCIATE commands |
| * removed unused NFC_RX_HANDOVER_REQ and NFC_RX_HANDOVER_SEL control |
| interface commands (the more generic NFC_REPORT_HANDOVER is now used) |
| * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding; |
| this fixes password with include UTF-8 characters that use |
| three-byte encoding EAP methods that use NtPasswordHash |
| * fixed couple of sequences where radio work items could get stuck, |
| e.g., when rfkill blocking happens during scanning or when |
| scan-for-auth workaround is used |
| * P2P enhancements/fixes |
| - enable enable U-APSD on GO automatically if the driver indicates |
| support for this |
| - fixed some service discovery cases with broadcast queries not being |
| sent to all stations |
| - fixed Probe Request frame triggering invitation to trigger only a |
| single invitation instance even if multiple Probe Request frames are |
| received |
| - fixed a potential NULL pointer dereference crash when processing an |
| invalid Invitation Request frame |
| - add optional configuration file for the P2P_DEVICE parameters |
| - optimize scan for GO during persistent group invocation |
| - fix possible segmentation fault when PBC overlap is detected while |
| using a separate P2P group interface |
| - improve GO Negotiation robustness by allowing GO Negotiation |
| Confirmation to be retransmitted |
| - do use freed memory on device found event when P2P NFC |
| * added phase1 network parameter options for disabling TLS v1.1 and v1.2 |
| to allow workarounds with misbehaving AAA servers |
| (tls_disable_tlsv1_1=1 and tls_disable_tlsv1_2=1) |
| * added support for OCSP stapling to validate AAA server certificate |
| during TLS exchange |
| * Interworking/Hotspot 2.0 enhancements |
| - prefer the last added network in Interworking connection to make the |
| behavior more consistent with likely user expectation |
| - roaming partner configuration (roaming_partner within a cred block) |
| - support Hotspot 2.0 Release 2 |
| * "hs20_anqp_get <BSSID> 8" to request OSU Providers list |
| * "hs20_icon_request <BSSID> <icon filename>" to request icon files |
| * "fetch_osu" and "cancel_osu_fetch" to start/stop full OSU provider |
| search (all suitable APs in scan results) |
| * OSEN network for online signup connection |
| * min_{dl,ul}_bandwidth_{home,roaming} cred parameters |
| * max_bss_load cred parameter |
| * req_conn_capab cred parameter |
| * sp_priority cred parameter |
| * ocsp cred parameter |
| * slow down automatic connection attempts on EAP failure to meet |
| required behavior (no more than 10 retries within a 10-minute |
| interval) |
| * sample implementation of online signup client (both SPP and |
| OMA-DM protocols) (hs20/client/*) |
| - fixed GAS indication for additional comeback delay with status |
| code 95 |
| - extend ANQP_GET to accept Hotspot 2.0 subtypes |
| ANQP_GET <addr> <info id>[,<info id>]... |
| [,hs20:<subtype>][...,hs20:<subtype>] |
| - add control interface events CRED-ADDED <id>, |
| CRED-MODIFIED <id> <field>, CRED-REMOVED <id> |
| - add "GET_CRED <id> <field>" command |
| - enable FT for the connection automatically if the AP advertises |
| support for this |
| - fix a case where auto_interworking=1 could end up stopping scanning |
| * fixed TDLS interoperability issues with supported operating class in |
| some deployed stations |
| * internal TLS implementation enhancements/fixes |
| - add SHA256-based cipher suites |
| - add DHE-RSA cipher suites |
| - fix X.509 validation of PKCS#1 signature to check for extra data |
| * fixed PTK derivation for CCMP-256 and GCMP-256 |
| * added "reattach" command for fast reassociate-back-to-same-BSS |
| * allow PMF to be enabled for AP mode operation with the ieee80211w |
| parameter |
| * added "get_capability tdls" command |
| * added option to set config blobs through control interface with |
| "SET blob <name> <hexdump>" |
| * D-Bus interface extensions/fixes |
| - make p2p_no_group_iface configurable |
| - declare ServiceDiscoveryRequest method properly |
| - export peer's device address as a property |
| - make reassociate command behave like the control interface one, |
| i.e., to allow connection from disconnected state |
| * added optional "freq=<channel ranges>" parameter to SET pno |
| * added optional "freq=<channel ranges>" parameter to SELECT_NETWORK |
| * fixed OBSS scan result processing for 20/40 MHz co-ex report |
| * remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled |
| whenever CONFIG_WPS=y is set |
| * fixed regression in parsing of WNM Sleep Mode exit key data |
| * fixed potential segmentation fault and memory leaks in WNM neighbor |
| report processing |
| * EAP-pwd fixes |
| - fragmentation of PWD-Confirm-Resp |
| - fix memory leak when fragmentation is used |
| - fix possible segmentation fault on EAP method deinit if an invalid |
| group is negotiated |
| * added MACsec/IEEE Std 802.1X-2010 PAE implementation (currently |
| available only with the macsec_qca driver wrapper) |
| * fixed EAP-SIM counter-too-small message |
| * added 'dup_network <id_s> <id_d> <name>' command; this can be used to |
| clone the psk field without having toextract it from wpa_supplicant |
| * fixed GSM authentication on USIM |
| * added support for using epoll in eloop (CONFIG_ELOOP_EPOLL=y) |
| * fixed some concurrent virtual interface cases with dedicated P2P |
| management interface to not catch events from removed interface (this |
| could result in the management interface getting disabled) |
| * fixed a memory leak in SAE random number generation |
| * fixed off-by-one bounds checking in printf_encode() |
| - this could result in some control interface ATTACH command cases |
| terminating wpa_supplicant |
| * fixed EAPOL-Key exchange when GCMP is used with SHA256-based AKM |
| * various bug fixes |
| |
| 2014-02-04 - v2.1 |
| * added support for simultaneous authentication of equals (SAE) for |
| stronger password-based authentication with WPA2-Personal |
| * improved P2P negotiation and group formation robustness |
| - avoid unnecessary Dialog Token value changes during retries |
| - avoid more concurrent scanning cases during full group formation |
| sequence |
| - do not use potentially obsolete scan result data from driver |
| cache for peer discovery/updates |
| - avoid undesired re-starting of GO negotiation based on Probe |
| Request frames |
| - increase GO Negotiation and Invitation timeouts to address busy |
| environments and peers that take long time to react to messages, |
| e.g., due to power saving |
| - P2P Device interface type |
| * improved P2P channel selection (use more peer information and allow |
| more local options) |
| * added support for optional per-device PSK assignment by P2P GO |
| (wpa_cli p2p_set per_sta_psk <0/1>) |
| * added P2P_REMOVE_CLIENT for removing a client from P2P groups |
| (including persistent groups); this can be used to securely remove |
| a client from a group if per-device PSKs are used |
| * added more configuration flexibility for allowed P2P GO/client |
| channels (p2p_no_go_freq list and p2p_add_cli_chan=0/1) |
| * added nl80211 functionality |
| - VHT configuration for nl80211 |
| - MFP (IEEE 802.11w) information for nl80211 command API |
| - support split wiphy dump |
| - FT (IEEE 802.11r) with driver-based SME |
| - use advertised number of supported concurrent channels |
| - QoS Mapping configuration |
| * improved TDLS negotiation robustness |
| * added more TDLS peer parameters to be configured to the driver |
| * optimized connection time by allowing recently received scan results |
| to be used instead of having to run through a new scan |
| * fixed ctrl_iface BSS command iteration with RANGE argument and no |
| exact matches; also fixed argument parsing for some cases with |
| multiple arguments |
| * added 'SCAN TYPE=ONLY' ctrl_iface command to request manual scan |
| without executing roaming/network re-selection on scan results |
| * added Session-Id derivation for EAP peer methods |
| * added fully automated regression testing with mac80211_hwsim |
| * changed configuration parser to reject invalid integer values |
| * allow AP/Enrollee to be specified with BSSID instead of UUID for |
| WPS ER operations |
| * disable network block temporarily on repeated connection failures |
| * changed the default driver interface from wext to nl80211 if both are |
| included in the build |
| * remove duplicate networks if WPS provisioning is run multiple times |
| * remove duplicate networks when Interworking network selection uses the |
| same network |
| * added global freq_list configuration to allow scan frequencies to be |
| limited for all cases instead of just for a specific network block |
| * added support for BSS Transition Management |
| * added option to use "IFNAME=<ifname> " prefix to use the global |
| control interface connection to perform per-interface commands; |
| similarly, allow global control interface to be used as a monitor |
| interface to receive events from all interfaces |
| * fixed OKC-based PMKSA cache entry clearing |
| * fixed TKIP group key configuration with FT |
| * added support for using OCSP stapling to validate server certificate |
| (ocsp=1 as optional and ocsp=2 as mandatory) |
| * added EAP-EKE peer |
| * added peer restart detection for IBSS RSN |
| * added domain_suffix_match (and domain_suffix_match2 for Phase 2 |
| EAP-TLS) to specify additional constraint for the server certificate |
| domain name |
| * added support for external SIM/USIM processing in EAP-SIM, EAP-AKA, |
| and EAP-AKA' (CTRL-REQ-SIM and CTRL-RSP-SIM commands over control |
| interface) |
| * added global bgscan configuration option as a default for all network |
| blocks that do not specify their own bgscan parameters |
| * added D-Bus methods for TDLS |
| * added more control to scan requests |
| - "SCAN freq=<freq list>" can be used to specify which channels are |
| scanned (comma-separated frequency ranges in MHz) |
| - "SCAN passive=1" can be used to request a passive scan (no Probe |
| Request frames are sent) |
| - "SCAN use_id" can be used to request a scan id to be returned and |
| included in event messages related to this specific scan operation |
| - "SCAN only_new=1" can be used to request the driver/cfg80211 to |
| report only BSS entries that have been updated during this scan |
| round |
| - these optional arguments to the SCAN command can be combined with |
| each other |
| * modified behavior on externally triggered scans |
| - avoid concurrent operations requiring full control of the radio when |
| an externally triggered scan is detected |
| - do not use results for internal roaming decision |
| * added a new cred block parameter 'temporary' to allow credential |
| blocks to be stored separately even if wpa_supplicant configuration |
| file is used to maintain other network information |
| * added "radio work" framework to schedule exclusive radio operations |
| for off-channel functionality |
| - reduce issues with concurrent operations that try to control which |
| channel is used |
| - allow external programs to request exclusive radio control in a way |
| that avoids conflicts with wpa_supplicant |
| * added support for using Protected Dual of Public Action frames for |
| GAS/ANQP exchanges when associated with PMF |
| * added support for WPS+NFC updates and P2P+NFC |
| - improved protocol for WPS |
| - P2P group formation/join based on NFC connection handover |
| - new IPv4 address assignment for P2P groups (ip_addr_* configuration |
| parameters on the GO) to replace DHCP |
| - option to fetch and report alternative carrier records for external |
| NFC operations |
| * various bug fixes |
| |
| 2013-01-12 - v2.0 |
| * removed Qt3-based wpa_gui (obsoleted by wpa_qui-qt4) |
| * removed unmaintained driver wrappers broadcom, iphone, osx, ralink, |
| hostap, madwifi (hostap and madwifi remain available for hostapd; |
| their wpa_supplicant functionality is obsoleted by wext) |
| * improved debug logging (human readable event names, interface name |
| included in more entries) |
| * changed AP mode behavior to enable WPS only for open and |
| WPA/WPA2-Personal configuration |
| * improved P2P concurrency operations |
| - better coordination of concurrent scan and P2P search operations |
| - avoid concurrent remain-on-channel operation requests by canceling |
| previous operations prior to starting a new one |
| - reject operations that would require multi-channel concurrency if |
| the driver does not support it |
| - add parameter to select whether STA or P2P connection is preferred |
| if the driver cannot support both at the same time |
| - allow driver to indicate channel changes |
| - added optional delay=<search delay in milliseconds> parameter for |
| p2p_find to avoid taking all radio resources |
| - use 500 ms p2p_find search delay by default during concurrent |
| operations |
| - allow all channels in GO Negotiation if the driver supports |
| multi-channel concurrency |
| * added number of small changes to make it easier for static analyzers |
| to understand the implementation |
| * fixed number of small bugs (see git logs for more details) |
| * nl80211: number of updates to use new cfg80211/nl80211 functionality |
| - replace monitor interface with nl80211 commands for AP mode |
| - additional information for driver-based AP SME |
| - STA entry authorization in RSN IBSS |
| * EAP-pwd: |
| - fixed KDF for group 21 and zero-padding |
| - added support for fragmentation |
| - increased maximum number of hunting-and-pecking iterations |
| * avoid excessive Probe Response retries for broadcast Probe Request |
| frames (only with drivers using wpa_supplicant AP mode SME/MLME) |
| * added "GET country" ctrl_iface command |
| * do not save an invalid network block in wpa_supplicant.conf to avoid |
| problems reading the file on next start |
| * send STA connected/disconnected ctrl_iface events to both the P2P |
| group and parent interfaces |
| * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) |
| * added "SET pno <1/0>" ctrl_iface command to start/stop preferred |
| network offload with sched_scan driver command |
| * merged in number of changes from Android repository for P2P, nl80211, |
| and build parameters |
| * changed P2P GO mode configuration to use driver capabilities to |
| automatically enable HT operations when supported |
| * added "wpa_cli status wps" command to fetch WPA2-Personal passhrase |
| for WPS use cases in AP mode |
| * EAP-AKA: keep pseudonym identity across EAP exchanges to match EAP-SIM |
| behavior |
| * improved reassociation behavior in cases where association is rejected |
| or when an AP disconnects us to handle common load balancing |
| mechanisms |
| - try to avoid extra scans when the needed information is available |
| * added optional "join" argument for p2p_prov_disc ctrl_iface command |
| * added group ifname to P2P-PROV-DISC-* events |
| * added P2P Device Address to AP-STA-DISCONNECTED event and use |
| p2p_dev_addr parameter name with AP-STA-CONNECTED |
| * added workarounds for WPS PBC overlap detection for some P2P use cases |
| where deployed stations work incorrectly |
| * optimize WPS connection speed by disconnecting prior to WPS scan and |
| by using single channel scans when AP channel is known |
| * PCSC and SIM/USIM improvements: |
| - accept 0x67 (Wrong length) as a response to READ RECORD to fix |
| issues with some USIM cards |
| - try to read MNC length from SIM/USIM |
| - build realm according to 3GPP TS 23.003 with identity from the SIM |
| - allow T1 protocol to be enabled |
| * added more WPS and P2P information available through D-Bus |
| * improve P2P negotiation robustness |
| - extra waits to get ACK frames through |
| - longer timeouts for cases where deployed devices have been |
| identified have issues meeting the specification requirements |
| - more retries for some P2P frames |
| - handle race conditions in GO Negotiation start by both devices |
| - ignore unexpected GO Negotiation Response frame |
| * added support for libnl 3.2 and newer |
| * added P2P persistent group info to P2P_PEER data |
| * maintain a list of P2P Clients for persistent group on GO |
| * AP: increased initial group key handshake retransmit timeout to 500 ms |
| * added optional dev_id parameter for p2p_find |
| * added P2P-FIND-STOPPED ctrl_iface event |
| * fixed issues in WPA/RSN element validation when roaming with ap_scan=1 |
| and driver-based BSS selection |
| * do not expire P2P peer entries while connected with the peer in a |
| group |
| * fixed WSC element inclusion in cases where P2P is disabled |
| * AP: added a WPS workaround for mixed mode AP Settings with Windows 7 |
| * EAP-SIM: fixed AT_COUNTER_TOO_SMALL use |
| * EAP-SIM/AKA: append realm to pseudonym identity |
| * EAP-SIM/AKA: store pseudonym identity in network configuration to |
| allow it to persist over multiple EAP sessions and wpa_supplicant |
| restarts |
| * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this |
| breaks interoperability with older versions |
| * added support for WFA Hotspot 2.0 |
| - GAS/ANQP to fetch network information |
| - credential configuration and automatic network selections based on |
| credential match with ANQP information |
| * limited PMKSA cache entries to be used only with the network context |
| that was used to create them |
| * improved PMKSA cache expiration to avoid unnecessary disconnections |
| * adjusted bgscan_simple fast-scan backoff to avoid too frequent |
| background scans |
| * removed ctrl_iface event on P2P PD Response in join-group case |
| * added option to fetch BSS table entry based on P2P Device Address |
| ("BSS p2p_dev_addr=<P2P Device Address>") |
| * added BSS entry age to ctrl_iface BSS command output |
| * added optional MASK=0xH option for ctrl_iface BSS command to select |
| which fields are included in the response |
| * added optional RANGE=ALL|N1-N2 option for ctrl_iface BSS command to |
| fetch information about several BSSes in one call |
| * simplified licensing terms by selecting the BSD license as the only |
| alternative |
| * added "P2P_SET disallow_freq <freq list>" ctrl_iface command to |
| disable channels from P2P use |
| * added p2p_pref_chan configuration parameter to allow preferred P2P |
| channels to be specified |
| * added support for advertising immediate availability of a WPS |
| credential for P2P use cases |
| * optimized scan operations for P2P use cases (use single channel scan |
| for a specific SSID when possible) |
| * EAP-TTLS: fixed peer challenge generation for MSCHAPv2 |
| * SME: do not use reassociation after explicit disconnection request |
| (local or a notification from an AP) |
| * added support for sending debug info to Linux tracing (-T on command |
| line) |
| * added support for using Deauthentication reason code 3 as an |
| indication of P2P group termination |
| * added wps_vendor_ext_m1 configuration parameter to allow vendor |
| specific attributes to be added to WPS M1 |
| * started using separate TLS library context for tunneled TLS |
| (EAP-PEAP/TLS, EAP-TTLS/TLS, EAP-FAST/TLS) to support different CA |
| certificate configuration between Phase 1 and Phase 2 |
| * added optional "auto" parameter for p2p_connect to request automatic |
| GO Negotiation vs. join-a-group selection |
| * added disabled_scan_offload parameter to disable automatic scan |
| offloading (sched_scan) |
| * added optional persistent=<network id> parameter for p2p_connect to |
| allow forcing of a specific SSID/passphrase for GO Negotiation |
| * added support for OBSS scan requests and 20/40 BSS coexistence reports |
| * reject PD Request for unknown group |
| * removed scripts and notes related to Windows binary releases (which |
| have not been used starting from 1.x) |
| * added initial support for WNM operations |
| - Keep-alive based on BSS max idle period |
| - WNM-Sleep Mode |
| - minimal BSS Transition Management processing |
| * added autoscan module to control scanning behavior while not connected |
| - autoscan_periodic and autoscan_exponential modules |
| * added new WPS NFC ctrl_iface mechanism |
| - added initial support NFC connection handover |
| - removed obsoleted WPS_OOB command (including support for deprecated |
| UFD config_method) |
| * added optional framework for external password storage ("ext:<name>") |
| * wpa_cli: added optional support for controlling wpa_supplicant |
| remotely over UDP (CONFIG_CTRL_IFACE=udp-remote) for testing purposes |
| * wpa_cli: extended tab completion to more commands |
| * changed SSID output to use printf-escaped strings instead of masking |
| of non-ASCII characters |
| - SSID can now be configured in the same format: ssid=P"abc\x00test" |
| * removed default ACM=1 from AC_VO and AC_VI |
| * added optional "ht40" argument for P2P ctrl_iface commands to allow |
| 40 MHz channels to be requested on the 5 GHz band |
| * added optional parameters for p2p_invite command to specify channel |
| when reinvoking a persistent group as the GO |
| * improved FIPS mode builds with OpenSSL |
| - "make fips" with CONFIG_FIPS=y to build wpa_supplicant with the |
| OpenSSL FIPS object module |
| - replace low level OpenSSL AES API calls to use EVP |
| - use OpenSSL keying material exporter when possible |
| - do not export TLS keys in FIPS mode |
| - remove MD5 from CONFIG_FIPS=y builds |
| - use OpenSSL function for PKBDF2 passphrase-to-PSK |
| - use OpenSSL HMAC implementation |
| - mix RAND_bytes() output into random_get_bytes() to force OpenSSL |
| DRBG to be used in FIPS mode |
| - use OpenSSL CMAC implementation |
| * added mechanism to disable TLS Session Ticket extension |
| - a workaround for servers that do not support TLS extensions that |
| was enabled by default in recent OpenSSL versions |
| - tls_disable_session_ticket=1 |
| - automatically disable TLS Session Ticket extension by default when |
| using EAP-TLS/PEAP/TTLS (i.e., only use it with EAP-FAST) |
| * changed VENDOR-TEST EAP method to use proper private enterprise number |
| (this will not interoperate with older versions) |
| * disable network block temporarily on authentication failures |
| * improved WPS AP selection during WPS PIN iteration |
| * added support for configuring GCMP cipher for IEEE 802.11ad |
| * added support for Wi-Fi Display extensions |
| - WFD_SUBELEMENT_SET ctrl_iface command to configure WFD subelements |
| - SET wifi_display <0/1> to disable/enable WFD support |
| - WFD service discovery |
| - an external program is needed to manage the audio/video streaming |
| and codecs |
| * optimized scan result use for network selection |
| - use the internal BSS table instead of raw scan results |
| - allow unnecessary scans to be skipped if fresh information is |
| available (e.g., after GAS/ANQP round for Interworking) |
| * added support for 256-bit AES with internal TLS implementation |
| * allow peer to propose channel in P2P invitation process for a |
| persistent group |
| * added disallow_aps parameter to allow BSSIDs/SSIDs to be disallowed |
| from network selection |
| * re-enable the networks disabled during WPS operations |
| * allow P2P functionality to be disabled per interface (p2p_disabled=1) |
| * added secondary device types into P2P_PEER output |
| * added an option to disable use of a separate P2P group interface |
| (p2p_no_group_iface=1) |
| * fixed P2P Bonjour SD to match entries with both compressed and not |
| compressed domain name format and support multiple Bonjour PTR matches |
| for the same key |
| * use deauthentication instead of disassociation for all disconnection |
| operations; this removes the now unused disassociate() wpa_driver_ops |
| callback |
| * optimized PSK generation on P2P GO by caching results to avoid |
| multiple PBKDF2 operations |
| * added okc=1 global configuration parameter to allow OKC to be enabled |
| by default for all network blocks |
| * added a workaround for WPS PBC session overlap detection to avoid |
| interop issues with deployed station implementations that do not |
| remove active PBC indication from Probe Request frames properly |
| * added basic support for 60 GHz band |
| * extend EAPOL frames processing workaround for roaming cases |
| (postpone processing of unexpected EAPOL frame until association |
| event to handle reordered events) |
| |
| 2012-05-10 - v1.0 |
| * bsd: Add support for setting HT values in IFM_MMASK. |
| * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. |
| This allows the driver to use PS buffering of Deauthentication and |
| Disassociation frames when the STA is in power save sleep. Only |
| available with drivers that provide TX status events for Deauth/ |
| Disassoc frames (nl80211). |
| * Drop oldest unknown BSS table entries first. This makes it less |
| likely to hit connection issues in environments with huge number |
| of visible APs. |
| * Add systemd support. |
| * Add support for setting the syslog facility from the config file |
| at build time. |
| * atheros: Add support for IEEE 802.11w configuration. |
| * AP mode: Allow enable HT20 if driver supports it, by setting the |
| config parameter ieee80211n. |
| * Allow AP mode to disconnect STAs based on low ACK condition (when |
| the data connection is not working properly, e.g., due to the STA |
| going outside the range of the AP). Disabled by default, enable by |
| config option disassoc_low_ack. |
| * nl80211: |
| - Support GTK rekey offload. |
| - Support PMKSA candidate events. This adds support for RSN |
| pre-authentication with nl80211 interface and drivers that handle |
| roaming internally. |
| * dbus: |
| - Add a DBus signal for EAP SM requests, emitted on the Interface |
| object. |
| - Export max scan ssids supported by the driver as MaxScanSSID. |
| - Add signal Certification for information about server certification. |
| - Add BSSExpireAge and BSSExpireCount interface properties and |
| support set/get, which allows for setting BSS cache expiration age |
| and expiration scan count. |
| - Add ConfigFile to AddInterface properties. |
| - Add Interface.Country property and support to get/set the value. |
| - Add DBus property CurrentAuthMode. |
| - P2P DBus API added. |
| - Emit property changed events (for property BSSs) when adding/ |
| removing BSSs. |
| - Treat '' in SSIDs of Interface.Scan as a request for broadcast |
| scan, instead of ignoring it. |
| - Add DBus getter/setter for FastReauth. |
| - Raise PropertiesChanged on org.freedesktop.DBus.Properties. |
| * wpa_cli: |
| - Send AP-STA-DISCONNECTED event when an AP disconnects a station |
| due to inactivity. |
| - Make second argument to set command optional. This can be used to |
| indicate a zero length value. |
| - Add signal_poll command. |
| - Add bss_expire_age and bss_expire_count commands to set/get BSS |
| cache expiration age and expiration scan count. |
| - Add ability to set scan interval (the time in seconds wpa_s waits |
| before requesting a new scan after failing to find a suitable |
| network in scan results) using scan_interval command. |
| - Add event CTRL-EVENT-ASSOC-REJECT for association rejected. |
| - Add command get version, that returns wpa_supplicant version string. |
| - Add command sta_autoconnect for disabling automatic reconnection |
| on receiving disconnection event. |
| - Setting bssid parameter to an empty string "" or any can now be |
| used to clear the bssid_set flag in a network block, i.e., to remove |
| bssid filtering. |
| - Add tdls_testing command to add a special testing feature for |
| changing TDLS behavior. Build param CONFIG_TDLS_TESTING must be |
| enabled as well. |
| - For interworking, add wpa_cli commands interworking_select, |
| interworking_connect, anqp_get, fetch_anqp, and stop_fetch_anqp. |
| - Many P2P commands were added. See README-P2P. |
| - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. |
| - Allow set command to change global config parameters. |
| - Add log_level command, which can be used to display the current |
| debugging level and to change the log level during run time. |
| - Add note command, which can be used to insert notes to the debug |
| log. |
| - Add internal line edit implementation. CONFIG_WPA_CLI_EDIT=y |
| can now be used to build wpa_cli with internal implementation of |
| line editing and history support. This can be used as a replacement |
| for CONFIG_READLINE=y. |
| * AP mode: Add max_num_sta config option, which can be used to limit |
| the number of stations allowed to connect to the AP. |
| * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad |
| config file. |
| * wext: Increase scan timeout from 5 to 10 seconds. |
| * Add blacklist command, allowing an external program to |
| manage the BSS blacklist and display its current contents. |
| * WPS: |
| - Add wpa_cli wps_pin get command for generating random PINs. This can |
| be used in a UI to generate a PIN without starting WPS (or P2P) |
| operation. |
| - Set RF bands based on driver capabilities, instead of hardcoding |
| them. |
| - Add mechanism for indicating non-standard WPS errors. |
| - Add CONFIG_WPS_REG_DISABLE_OPEN=y option to disable open networks |
| by default. |
| - Add wps_ap_pin cli command for wpa_supplicant AP mode. |
| - Add wps_check_pin cli command for processing PIN from user input. |
| UIs can use this command to process a PIN entered by a user and to |
| validate the checksum digit (if present). |
| - Cancel WPS operation on PBC session overlap detection. |
| - New wps_cancel command in wpa_cli will cancel a pending WPS |
| operation. |
| - wpa_cli action: Add WPS_EVENT_SUCCESS and WPS_EVENT_FAIL handlers. |
| - Trigger WPS config update on Manufacturer, Model Name, Model |
| Number, and Serial Number changes. |
| - Fragment size is now configurable for EAP-WSC peer. Use |
| wpa_cli set wps_fragment_size <val>. |
| - Disable AP PIN after 10 consecutive failures. Slow down attacks on |
| failures up to 10. |
| - Allow AP to start in Enrollee mode without AP PIN for probing, to |
| be compatible with Windows 7. |
| - Add Config Error into WPS-FAIL events to provide more info to the |
| user on how to resolve the issue. |
| - Label and Display config methods are not allowed to be enabled |
| at the same time, since it is unclear which PIN to use if both |
| methods are advertised. |
| - When controlling multiple interfaces: |
| - apply WPS commands to all interfaces configured to use WPS |
| - apply WPS config changes to all interfaces that use WPS |
| - when an attack is detected on any interface, disable AP PIN on |
| all interfaces |
| * WPS ER: |
| - Add special AP Setup Locked mode to allow read only ER. |
| ap_setup_locked=2 can now be used to enable a special mode where |
| WPS ER can learn the current AP settings, but cannot change them. |
| - Show SetSelectedRegistrar events as ctrl_iface events |
| - Add wps_er_set_config to enroll a network based on a local |
| network configuration block instead of having to (re-)learn the |
| current AP settings with wps_er_learn. |
| - Allow AP filtering based on IP address, add ctrl_iface event for |
| learned AP settings, add wps_er_config command to configure an AP. |
| * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) |
| - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool |
| for testing protocol extensibility. |
| - Add build option CONFIG_WPS_STRICT to allow disabling of WPS |
| workarounds. |
| - Add support for AuthorizedMACs attribute. |
| * TDLS: |
| - Propagate TDLS related nl80211 capability flags from kernel and |
| add them as driver capability flags. If the driver doesn't support |
| capabilities, assume TDLS is supported internally. When TDLS is |
| explicitly not supported, disable all user facing TDLS operations. |
| - Allow TDLS to be disabled at runtime (mostly for testing). |
| Use set tdls_disabled. |
| - Honor AP TDLS settings that prohibit/allow TDLS. |
| - Add a special testing feature for changing TDLS behavior. Use |
| CONFIG_TDLS_TESTING build param to enable. Configure at runtime |
| with tdls_testing cli command. |
| - Add support for TDLS 802.11z. |
| * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. |
| wlantest can be used to capture frames from a monitor interface |
| for realtime capturing or from pcap files for offline analysis. |
| * Interworking: Support added for 802.11u. Enable in .config with |
| CONFIG_INTERWORKING. See wpa_supplicant.conf for config parameters |
| for interworking. wpa_cli commands added to support this are |
| interworking_select, interworking_connect, anqp_get, fetch_anqp, |
| and stop_fetch_anqp. |
| * Android: Add build and runtime support for Android wpa_supplicant. |
| * bgscan learn: Add new bgscan that learns BSS information based on |
| previous scans, and uses that information to dynamically generate |
| the list of channels for background scans. |
| * Add a new debug message level for excessive information. Use |
| -ddd to enable. |
| * TLS: Add support for tls_disable_time_checks=1 in client mode. |
| * Internal TLS: |
| - Add support for TLS v1.1 (RFC 4346). Enable with build parameter |
| CONFIG_TLSV11. |
| - Add domainComponent parser for X.509 names. |
| * Linux: Add RFKill support by adding an interface state "disabled". |
| * Reorder some IEs to get closer to IEEE 802.11 standard. Move |
| WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. |
| Move HT IEs to be later in (Re)Assoc Resp. |
| * Solaris: Add support for wired 802.1X client. |
| * Wi-Fi Direct support. See README-P2P for more information. |
| * Many bugfixes. |
| |
| 2010-04-18 - v0.7.2 |
| * nl80211: fixed number of issues with roaming |
| * avoid unnecessary roaming if multiple APs with similar signal |
| strength are present in scan results |
| * add TLS client events and server probing to ease design of |
| automatic detection of EAP parameters |
| * add option for server certificate matching (SHA256 hash of the |
| certificate) instead of trusted CA certificate configuration |
| * bsd: Cleaned up driver wrapper and added various low-level |
| configuration options |
| * wpa_gui-qt4: do not show too frequent WPS AP available events as |
| tray messages |
| * TNC: fixed issues with fragmentation |
| * EAP-TNC: add Flags field into fragment acknowledgement (needed to |
| interoperate with other implementations; may potentially breaks |
| compatibility with older wpa_supplicant/hostapd versions) |
| * wpa_cli: added option for using a separate process to receive event |
| messages to reduce latency in showing these |
| (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) |
| * maximum BSS table size can now be configured (bss_max_count) |
| * BSSes to be included in the BSS table can be filtered based on |
| configured SSIDs to save memory (filter_ssids) |
| * fix number of issues with IEEE 802.11r/FT; this version is not |
| backwards compatible with old versions |
| * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air |
| and over-the-DS) |
| * add freq_list network configuration parameter to allow the AP |
| selection to filter out entries based on the operating channel |
| * add signal strength change events for bgscan; this allows more |
| dynamic changes to background scanning interval based on changes in |
| the signal strength with the current AP; this improves roaming within |
| ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network |
| configuration block to request background scans less frequently when |
| signal strength remains good and to automatically trigger background |
| scans whenever signal strength drops noticeably |
| (this is currently only available with nl80211) |
| * add BSSID and reason code (if available) to disconnect event messages |
| * wpa_gui-qt4: more complete support for translating the GUI with |
| linguist and add German translation |
| * fix DH padding with internal crypto code (mainly, for WPS) |
| * do not trigger initial scan automatically anymore if there are no |
| enabled networks |
| |
| 2010-01-16 - v0.7.1 |
| * cleaned up driver wrapper API (struct wpa_driver_ops); the new API |
| is not fully backwards compatible, so out-of-tree driver wrappers |
| will need modifications |
| * cleaned up various module interfaces |
| * merge hostapd and wpa_supplicant developers' documentation into a |
| single document |
| * nl80211: use explicit deauthentication to clear cfg80211 state to |
| avoid issues when roaming between APs |
| * dbus: major design changes in the new D-Bus API |
| (fi.w1.wpa_supplicant1) |
| * nl80211: added support for IBSS networks |
| * added internal debugging mechanism with backtrace support and memory |
| allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) |
| * added WPS ER unsubscription command to more cleanly unregister from |
| receiving UPnP events when ER is terminated |
| * cleaned up AP mode operations to avoid need for virtual driver_ops |
| wrapper |
| * added BSS table to maintain more complete scan result information |
| over multiple scans (that may include only partial results) |
| * wpa_gui-qt4: update Peers dialog information more dynamically while |
| the dialog is kept open |
| * fixed PKCS#12 use with OpenSSL 1.0.0 |
| * driver_wext: Added cfg80211-specific optimization to avoid some |
| unnecessary scans and to speed up association |
| |
| 2009-11-21 - v0.7.0 |
| * increased wpa_cli ping interval to 5 seconds and made this |
| configurable with a new command line options (-G<seconds>) |
| * fixed scan buffer processing with WEXT to handle up to 65535 |
| byte result buffer (previously, limited to 32768 bytes) |
| * allow multiple driver wrappers to be specified on command line |
| (e.g., -Dnl80211,wext); the first one that is able to initialize the |
| interface will be used |
| * added support for multiple SSIDs per scan request to optimize |
| scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden |
| SSIDs); this requires driver support and can currently be used only |
| with nl80211 |
| * added support for WPS USBA out-of-band mechanism with USB Flash |
| Drives (UFD) (CONFIG_WPS_UFD=y) |
| * driver_ndis: add PAE group address to the multicast address list to |
| fix wired IEEE 802.1X authentication |
| * fixed IEEE 802.11r key derivation function to match with the standard |
| (note: this breaks interoperability with previous version) [Bug 303] |
| * added better support for drivers that allow separate authentication |
| and association commands (e.g., mac80211-based Linux drivers with |
| nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol |
| to be used (IEEE 802.11r) |
| * fixed SHA-256 based key derivation function to match with the |
| standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) |
| (note: this breaks interoperability with previous version) [Bug 307] |
| * use shared driver wrapper files with hostapd |
| * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network |
| block; this can be used for open and WPA2-Personal networks |
| (optionally, with WPS); this links in parts of hostapd functionality |
| into wpa_supplicant |
| * wpa_gui-qt4: added new Peers dialog to show information about peers |
| (other devices, including APs and stations, etc. in the neighborhood) |
| * added support for WPS External Registrar functionality (configure APs |
| and enroll new devices); can be used with wpa_gui-qt4 Peers dialog |
| and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, |
| wps_er_pbc, wps_er_learn |
| (this can also be used with a new 'none' driver wrapper if no |
| wireless device or IEEE 802.1X on wired is needed) |
| * driver_nl80211: multiple updates to provide support for new Linux |
| nl80211/mac80211 functionality |
| * updated management frame protection to use IEEE Std 802.11w-2009 |
| * fixed number of small WPS issues and added workarounds to |
| interoperate with common deployed broken implementations |
| * added support for NFC out-of-band mechanism with WPS |
| * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group |
| address frames |
| * added preliminary support for IEEE 802.11r RIC processing |
| * added support for specifying subset of enabled frequencies to scan |
| (scan_freq option in the network configuration block); this can speed |
| up scanning process considerably if it is known that only a small |
| subset of channels is actually used in the network (this is currently |
| supported only with -Dnl80211) |
| * added a workaround for race condition between receiving the |
| association event and the following EAPOL-Key |
| * added background scan and roaming infrastructure to allow |
| network-specific optimizations to be used to improve roaming within |
| an ESS (same SSID) |
| * added new DBus interface (fi.w1.wpa_supplicant1) |
| |
| 2009-01-06 - v0.6.7 |
| * added support for Wi-Fi Protected Setup (WPS) |
| (wpa_supplicant can now be configured to act as a WPS Enrollee to |
| enroll credentials for a network using PIN and PBC methods; in |
| addition, wpa_supplicant can act as a wireless WPS Registrar to |
| configure an AP); WPS support can be enabled by adding CONFIG_WPS=y |
| into .config and setting the runtime configuration variables in |
| wpa_supplicant.conf (see WPS section in the example configuration |
| file); new wpa_cli commands wps_pin, wps_pbc, and wps_reg are used to |
| manage WPS negotiation; see README-WPS for more details |
| * added support for EAP-AKA' (draft-arkko-eap-aka-kdf) |
| * added support for using driver_test over UDP socket |
| * fixed PEAPv0 Cryptobinding interoperability issue with Windows Server |
| 2008 NPS; optional cryptobinding is now enabled (again) by default |
| * fixed PSK editing in wpa_gui |
| * changed EAP-GPSK to use the IANA assigned EAP method type 51 |
| * added a Windows installer that includes WinPcap and all the needed |
| DLLs; in addition, it set up the registry automatically so that user |
| will only need start wpa_gui to get prompted to start the wpasvc |
| servide and add a new interface if needed through wpa_gui dialog |
| * updated management frame protection to use IEEE 802.11w/D7.0 |
| |
| 2008-11-23 - v0.6.6 |
| * added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA |
| (can be used to simulate test SIM/USIM card with a known private key; |
| enable with CONFIG_SIM_SIMULATOR=y/CONFIG_USIM_SIMULATOR=y in .config |
| and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration) |
| * added a new network configuration option, wpa_ptk_rekey, that can be |
| used to enforce frequent PTK rekeying, e.g., to mitigate some attacks |
| against TKIP deficiencies |
| * added an optional mitigation mechanism for certain attacks against |
| TKIP by delaying Michael MIC error reports by a random amount of time |
| between 0 and 60 seconds; this can be enabled with a build option |
| CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config |
| * fixed EAP-AKA to use RES Length field in AT_RES as length in bits, |
| not bytes |
| * updated OpenSSL code for EAP-FAST to use an updated version of the |
| session ticket overriding API that was included into the upstream |
| OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is |
| needed with that version anymore) |
| * updated userspace MLME instructions to match with the current Linux |
| mac80211 implementation; please also note that this can only be used |
| with driver_nl80211.c (the old code from driver_wext.c was removed) |
| * added support (Linux only) for RoboSwitch chipsets (often found in |
| consumer grade routers); driver interface 'roboswitch' |
| * fixed canceling of PMKSA caching when using drivers that generate |
| RSN IE and refuse to drop PMKIDs that wpa_supplicant does not know |
| about |
| |
| 2008-11-01 - v0.6.5 |
| * added support for SHA-256 as X.509 certificate digest when using the |
| internal X.509/TLSv1 implementation |
| * updated management frame protection to use IEEE 802.11w/D6.0 |
| * added support for using SHA256-based stronger key derivation for WPA2 |
| (IEEE 802.11w) |
| * fixed FT (IEEE 802.11r) authentication after a failed association to |
| use correct FTIE |
| * added support for configuring Phase 2 (inner/tunneled) authentication |
| method with wpa_gui-qt4 |
| |
| 2008-08-10 - v0.6.4 |
| * added support for EAP Sequences in EAP-FAST Phase 2 |
| * added support for using TNC with EAP-FAST |
| * added driver_ps3 for the PS3 Linux wireless driver |
| * added support for optional cryptobinding with PEAPv0 |
| * fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to |
| allow fallback to full handshake if server rejects PAC-Opaque |
| * added fragmentation support for EAP-TNC |
| * added support for parsing PKCS #8 formatted private keys into the |
| internal TLS implementation (both PKCS #1 RSA key and PKCS #8 |
| encapsulated RSA key can now be used) |
| * added option of using faster, but larger, routines in the internal |
| LibTomMath (for internal TLS implementation) to speed up DH and RSA |
| calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y) |
| * fixed race condition between disassociation event and group key |
| handshake to avoid getting stuck in incorrect state [Bug 261] |
| * fixed opportunistic key caching (proactive_key_caching) |
| |
| 2008-02-22 - v0.6.3 |
| * removed 'nai' and 'eappsk' network configuration variables that were |
| previously used for configuring user identity and key for EAP-PSK, |
| EAP-PAX, EAP-SAKE, and EAP-GPSK. 'identity' field is now used as the |
| replacement for 'nai' (if old configuration used a separate |
| 'identity' value, that would now be configured as |
| 'anonymous_identity'). 'password' field is now used as the |
| replacement for 'eappsk' (it can also be set using hexstring to |
| present random binary data) |
| * removed '-w' command line parameter (wait for interface to be added, |
| if needed); cleaner way of handling this functionality is to use an |
| external mechanism (e.g., hotplug scripts) that start wpa_supplicant |
| when an interface is added |
| * updated FT support to use the latest draft, IEEE 802.11r/D9.0 |
| * added ctrl_iface monitor event (CTRL-EVENT-SCAN-RESULTS) for |
| indicating when new scan results become available |
| * added new ctrl_iface command, BSS, to allow scan results to be |
| fetched without hitting the message size limits (this command |
| can be used to iterate through the scan results one BSS at the time) |
| * fixed EAP-SIM not to include AT_NONCE_MT and AT_SELECTED_VERSION |
| attributes in EAP-SIM Start/Response when using fast reauthentication |
| * fixed EAPOL not to end up in infinite loop when processing dynamic |
| WEP keys with IEEE 802.1X |
| * fixed problems in getting NDIS events from WMI on Windows 2000 |
| |
| 2008-01-01 - v0.6.2 |
| * added support for Makefile builds to include debug-log-to-a-file |
| functionality (CONFIG_DEBUG_FILE=y and -f<path> on command line) |
| * fixed EAP-SIM and EAP-AKA message parser to validate attribute |
| lengths properly to avoid potential crash caused by invalid messages |
| * added data structure for storing allocated buffers (struct wpabuf); |
| this does not affect wpa_supplicant usage, but many of the APIs |
| changed and various interfaces (e.g., EAP) is not compatible with old |
| versions |
| * added support for protecting EAP-AKA/Identity messages with |
| AT_CHECKCODE (optional feature in RFC 4187) |
| * added support for protected result indication with AT_RESULT_IND for |
| EAP-SIM and EAP-AKA (phase1="result_ind=1") |
| * added driver_wext workaround for race condition between scanning and |
| association with drivers that take very long time to scan all |
| channels (e.g., madwifi with dual-band cards); wpa_supplicant is now |
| using a longer hardcoded timeout for the scan if the driver supports |
| notifications for scan completion (SIOCGIWSCAN event); this helps, |
| e.g., in cases where wpa_supplicant and madwifi driver ended up in |
| loop where the driver did not even try to associate |
| * stop EAPOL timer tick when no timers are in use in order to reduce |
| power consumption (no need to wake up the process once per second) |
| [Bug 237] |
| * added support for privilege separation (run only minimal part of |
| wpa_supplicant functionality as root and rest as unprivileged, |
| non-root process); see 'Privilege separation' in README for details; |
| this is disabled by default and can be enabled with CONFIG_PRIVSEP=y |
| in .config |
| * changed scan results data structure to include all information |
| elements to make it easier to support new IEs; old get_scan_result() |
| driver_ops is still supported for backwards compatibility (results |
| are converted internally to the new format), but all drivers should |
| start using the new get_scan_results2() to make them more likely to |
| work with new features |
| * Qt4 version of wpa_gui (wpa_gui-qt4 subdirectory) is now native Qt4 |
| application, i.e., it does not require Qt3Support anymore; Windows |
| binary of wpa_gui.exe is now from this directory and only requires |
| QtCore4.dll and QtGui4.dll libraries |
| * updated Windows binary build to use Qt 4.3.3 and made Qt DLLs |
| available as a separate package to make wpa_gui installation easier: |
| http://w1.fi/wpa_supplicant/qt4/wpa_gui-qt433-windows-dll.zip |
| * added support for EAP-IKEv2 (draft-tschofenig-eap-ikev2-15.txt); |
| only shared key/password authentication is supported in this version |
| |
| 2007-11-24 - v0.6.1 |
| * added support for configuring password as NtPasswordHash |
| (16-byte MD4 hash of password) in hash:<32 hex digits> format |
| * added support for fallback from abbreviated TLS handshake to |
| full handshake when using EAP-FAST (e.g., due to an expired |
| PAC-Opaque) |
| * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest |
| draft (draft-ietf-emu-eap-gpsk-07.txt) |
| * added support for drivers that take care of RSN 4-way handshake |
| internally (WPA_DRIVER_FLAGS_4WAY_HANDSHAKE in get_capa flags and |
| WPA_ALG_PMK in set_key) |
| * added an experimental port for Mac OS X (CONFIG_DRIVER_OSX=y in |
| .config); this version supports only ap_scan=2 mode and allow the |
| driver to take care of the 4-way handshake |
| * fixed a buffer overflow in parsing TSF from scan results when using |
| driver_wext.c with a driver that includes the TSF (e.g., iwl4965) |
| [Bug 232] |
| * updated FT support to use the latest draft, IEEE 802.11r/D8.0 |
| * fixed an integer overflow issue in the ASN.1 parser used by the |
| (experimental) internal TLS implementation to avoid a potential |
| buffer read overflow |
| * fixed a race condition with -W option (wait for a control interface |
| monitor before starting) that could have caused the first messages to |
| be lost |
| * added support for processing TNCC-TNCS-Messages to report |
| recommendation (allow/none/isolate) when using TNC [Bug 243] |
| |
| 2007-05-28 - v0.6.0 |
| * added network configuration parameter 'frequency' for setting |
| initial channel for IBSS (adhoc) networks |
| * added experimental IEEE 802.11r/D6.0 support |
| * updated EAP-SAKE to RFC 4763 and the IANA-allocated EAP type 48 |
| * updated EAP-PSK to use the IANA-allocated EAP type 47 |
| * fixed EAP-PAX key derivation |
| * fixed EAP-PSK bit ordering of the Flags field |
| * fixed EAP-PEAP/TTLS/FAST to use the correct EAP identifier in |
| tunnelled identity request (previously, the identifier from the outer |
| method was used, not the tunnelled identifier which could be |
| different) |
| * added support for fragmentation of outer TLS packets during Phase 2 |
| of EAP-PEAP/TTLS/FAST |
| * fixed EAP-TTLS AVP parser processing for too short AVP lengths |
| * added support for EAP-FAST authentication with inner methods that |
| generate MSK (e.g., EAP-MSCHAPv2 that was previously only supported |
| for PAC provisioning) |
| * added support for authenticated EAP-FAST provisioning |
| * added support for configuring maximum number of EAP-FAST PACs to |
| store in a PAC list (fast_max_pac_list_len=<max> in phase1 string) |
| * added support for storing EAP-FAST PACs in binary format |
| (fast_pac_format=binary in phase1 string) |
| * fixed dbus ctrl_iface to validate message interface before |
| dispatching to avoid a possible segfault [Bug 190] |
| * fixed PeerKey key derivation to use the correct PRF label |
| * updated Windows binary build to link against OpenSSL 0.9.8d and |
| added support for EAP-FAST |
| * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest |
| draft (draft-ietf-emu-eap-gpsk-04.txt) |
| * fixed EAP-AKA Notification processing to allow Notification to be |
| processed after AKA Challenge response has been sent |
| * updated to use IEEE 802.11w/D2.0 for management frame protection |
| (still experimental) |
| * fixed EAP-TTLS implementation not to crash on use of freed memory |
| if TLS library initialization fails |
| * added support for EAP-TNC (Trusted Network Connect) |
| (this version implements the EAP-TNC method and EAP-TTLS changes |
| needed to run two methods in sequence (IF-T) and the IF-IMC and |
| IF-TNCCS interfaces from TNCC) |
| |
| 2006-11-24 - v0.5.6 |
| * added experimental, integrated TLSv1 client implementation with the |
| needed X.509/ASN.1/RSA/bignum processing (this can be enabled by |
| setting CONFIG_TLS=internal and CONFIG_INTERNAL_LIBTOMMATH=y in |
| .config); this can be useful, e.g., if the target system does not |
| have a suitable TLS library and a minimal code size is required |
| (total size of this internal TLS/crypto code is bit under 50 kB on |
| x86 and the crypto code is shared by rest of the supplicant so some |
| of it was already required; TLSv1/X.509/ASN.1/RSA added about 25 kB) |
| * removed STAKey handshake since PeerKey handshake has replaced it in |
| IEEE 802.11ma and there are no known deployments of STAKey |
| * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest |
| draft (draft-ietf-emu-eap-gpsk-01.txt) |
| * added preliminary implementation of IEEE 802.11w/D1.0 (management |
| frame protection) |
| (Note: this requires driver support to work properly.) |
| (Note2: IEEE 802.11w is an unapproved draft and subject to change.) |
| * fixed Windows named pipes ctrl_iface to not stop listening for |
| commands if client program opens a named pipe and closes it |
| immediately without sending a command |
| * fixed USIM PIN status determination for the case that PIN is not |
| needed (this allows EAP-AKA to be used with USIM cards that do not |
| use PIN) |
| * added support for reading 3G USIM AID from EF_DIR to allow EAP-AKA to |
| be used with cards that do not support file selection based on |
| partial AID |
| * added support for matching the subjectAltName of the authentication |
| server certificate against multiple name components (e.g., |
| altsubject_match="DNS:server.example.com;DNS:server2.example.com") |
| * fixed EAP-SIM/AKA key derivation for re-authentication case (only |
| affects IEEE 802.1X with dynamic WEP keys) |
| * changed ctrl_iface network configuration 'get' operations to not |
| return password/key material; if these fields are requested, "*" |
| will be returned if the password/key is set, but the value of the |
| parameter is not exposed |
| |
| 2006-08-27 - v0.5.5 |
| * added support for building Windows version with UNICODE defined |
| (wide-char functions) |
| * driver_ndis: fixed static WEP configuration to avoid race condition |
| issues with some NDIS drivers between association and setting WEP |
| keys |
| * driver_ndis: added validation for IELength value in scan results to |
| avoid crashes when using buggy NDIS drivers [Bug 165] |
| * fixed Release|Win32 target in the Visual Studio project files |
| (previously, only Debug|Win32 target was set properly) |
| * changed control interface API call wpa_ctrl_pending() to allow it to |
| return -1 on error (e.g., connection lost); control interface clients |
| will need to make sure that they verify that the value is indeed >0 |
| when determining whether there are pending messages |
| * added an alternative control interface backend for Windows targets: |
| Named Pipe (CONFIG_CTRL_IFACE=named_pipe); this is now the default |
| control interface mechanism for Windows builds (previously, UDP to |
| localhost was used) |
| * changed ctrl_interface configuration for UNIX domain sockets: |
| - deprecated ctrl_interface_group variable (it may be removed in |
| future versions) |
| - allow both directory and group be configured with ctrl_interface |
| in following format: DIR=/var/run/wpa_supplicant GROUP=wheel |
| - ctrl_interface=/var/run/wpa_supplicant is still supported for the |
| case when group is not changed |
| * added support for controlling more than one interface per process in |
| Windows version |
| * added a workaround for a case where the AP is using unknown address |
| (e.g., MAC address of the wired interface) as the source address for |
| EAPOL-Key frames; previously, that source address was used as the |
| destination for EAPOL-Key frames and in key derivation; now, BSSID is |
| used even if the source address does not match with it |
| (this resolves an interoperability issue with Thomson SpeedTouch 580) |
| * added a workaround for UDP-based control interface (which was used in |
| Windows builds before this release) to prevent packets with forged |
| addresses from being accepted as local control requests |
| * removed ndis_events.cpp and possibility of using external |
| ndis_events.exe; C version (ndis_events.c) is fully functional and |
| there is no desire to maintain two separate versions of this |
| implementation |
| * ndis_events: Changed NDIS event notification design to use WMI to |
| learn the adapter description through Win32_PnPEntity class; this |
| should fix some cases where the adapter name was not recognized |
| correctly (e.g., with some USB WLAN adapters, e.g., Ralink RT2500 |
| USB) [Bug 113] |
| * fixed selection of the first network in ap_scan=2 mode; previously, |
| wpa_supplicant could get stuck in SCANNING state when only the first |
| network for enabled (e.g., after 'wpa_cli select_network 0') |
| * winsvc: added support for configuring ctrl_interface parameters in |
| registry (ctrl_interface string value in |
| HKLM\SOFTWARE\wpa_supplicant\interfaces\0000 key); this new value is |
| required to enable control interface (previously, this was hardcoded |
| to be enabled) |
| * allow wpa_gui subdirectory to be built with both Qt3 and Qt4 |
| * converted wpa_gui-qt4 subdirectory to use Qt4 specific project format |
| |
| 2006-06-20 - v0.5.4 |
| * fixed build with CONFIG_STAKEY=y [Bug 143] |
| * added support for doing MLME (IEEE 802.11 management frame |
| processing) in wpa_supplicant when using Devicescape IEEE 802.11 |
| stack (wireless-dev.git tree) |
| * added a new network block configuration option, fragment_size, to |
| configure the maximum EAP fragment size |
| * driver_ndis: Disable WZC automatically for the selected interface to |
| avoid conflicts with two programs trying to control the radio; WZC |
| will be re-enabled (if it was enabled originally) when wpa_supplicant |
| is terminated |
| * added an experimental TLSv1 client implementation |
| (CONFIG_TLS=internal) that can be used instead of an external TLS |
| library, e.g., to reduce total size requirement on systems that do |
| not include any TLS library by default (this is not yet complete; |
| basic functionality is there, but certificate validation is not yet |
| included) |
| * added PeerKey handshake implementation for IEEE 802.11e |
| direct link setup (DLS) to replace STAKey handshake |
| * fixed WPA PSK update through ctrl_iface for the case where the old |
| PSK was derived from an ASCII passphrase and the new PSK is set as |
| a raw PSK (hex string) |
| * added new configuration option for identifying which network block |
| was used (id_str in wpa_supplicant.conf; included on |
| WPA_EVENT_CONNECT monitor event and as WPA_ID_STR environmental |
| variable in wpa_cli action scripts; in addition WPA_ID variable is |
| set to the current unique identifier that wpa_supplicant assigned |
| automatically for the network and that can be used with |
| GET_NETWORK/SET_NETWORK ctrl_iface commands) |
| * wpa_cli action script is now called only when the connect/disconnect |
| status changes or when associating with a different network |
| * fixed configuration parser not to remove CCMP from group cipher list |
| if WPA-None (adhoc) is used (pairwise=NONE in that case) |
| * fixed integrated NDIS events processing not to hang the process due |
| to a missed change in eloop_win.c API in v0.5.3 [Bug 155] |
| * added support for EAP Generalized Pre-Shared Key (EAP-GPSK, |
| draft-clancy-emu-eap-shared-secret-00.txt) |
| * added Microsoft Visual Studio 2005 solution and project files for |
| build wpa_supplicant for Windows (see vs2005 subdirectory) |
| * eloop_win: fixed unregistration of Windows events |
| * l2_packet_winpcap: fixed a deadlock in deinitializing l2_packet |
| at the end of RSN pre-authentication and added unregistration of |
| a Windows event to avoid getting eloop_win stuck with an invalid |
| handle |
| * driver_ndis: added support for selecting AP based on BSSID |
| * added new environmental variable for wpa_cli action scripts: |
| WPA_CTRL_DIR is the current control interface directory |
| * driver_ndis: added support for using NDISUIO instead of WinPcap for |
| OID set/query operations (CONFIG_USE_NDISUIO=y in .config); with new |
| l2_packet_ndis (CONFIG_L2_PACKET=ndis), this can be used to build |
| wpa_supplicant without requiring WinPcap; note that using NDISUIO |
| requires that WZC is disabled (net stop wzcsvc) since NDISUIO allows |
| only one application to open the device |
| * changed NDIS driver naming to only include device GUID, e.g., |
| {7EE3EFE5-C165-472F-986D-F6FBEDFE8C8D}, instead of including WinPcap |
| specific \Device\NPF_ prefix before the GUID; the prefix is still |
| allowed for backwards compatibility, but it is not required anymore |
| when specifying the interface |
| * driver_ndis: re-initialize driver interface is the adapter is removed |
| and re-inserted [Bug 159] |
| * driver_madwifi: fixed TKIP and CCMP sequence number configuration on |
| big endian hosts [Bug 146] |
| |
| 2006-04-27 - v0.5.3 |
| * fixed EAP-GTC response to include correct user identity when run as |
| phase 2 method of EAP-FAST (i.e., EAP-FAST did not work in v0.5.2) |
| * driver_ndis: Fixed encryption mode configuration for unencrypted |
| networks (some NDIS drivers ignored this, but others, e.g., Broadcom, |
| refused to associate with open networks) [Bug 106] |
| * driver_ndis: use BSSID OID polling to detect when IBSS network is |
| formed even when ndis_events code is included since some NDIS drivers |
| do not generate media connect events in IBSS mode |
| * config_winreg: allow global ctrl_interface parameter to be configured |
| in Windows registry |
| * config_winreg: added support for saving configuration data into |
| Windows registry |
| * added support for controlling network device operational state |
| (dormant/up) for Linux 2.6.17 to improve DHCP processing (see |
| http://www.flamewarmaster.de/software/dhcpclient/ for a DHCP client |
| that can use this information) |
| * driver_wext: added support for WE-21 change to SSID configuration |
| * driver_wext: fixed privacy configuration for static WEP keys mode |
| [Bug 140] |
| * added an optional driver_ops callback for MLME-SETPROTECTION.request |
| primitive |
| * added support for EAP-SAKE (no EAP method number allocated yet, so |
| this is using the same experimental type 255 as EAP-PSK) |
| * added support for dynamically loading EAP methods (.so files) instead |
| of requiring them to be statically linked in; this is disabled by |
| default (see CONFIG_DYNAMIC_EAP_METHODS in defconfig for information |
| on how to use this) |
| |
| 2006-03-19 - v0.5.2 |
| * do not try to use USIM APDUs when initializing PC/SC for SIM card |
| access for a network that has not enabled EAP-AKA |
| * fixed EAP phase 2 Nak for EAP-{PEAP,TTLS,FAST} (this was broken in |
| v0.5.1 due to the new support for expanded EAP types) |
| * added support for generating EAP Expanded Nak |
| * try to fetch scan results once before requesting new scan when |
| starting up in ap_scan=1 mode (this can speed up initial association |
| a lot with, e.g., madwifi-ng driver) |
| * added support for receiving EAPOL frames from a Linux bridge |
| interface (-bbr0 on command line) |
| * fixed EAPOL re-authentication for sessions that used PMKSA caching |
| * changed EAP method registration to use a dynamic list of methods |
| instead of a static list generated at build time |
| * fixed PMKSA cache deinitialization not to use freed memory when |
| removing PMKSA entries |
| * fixed a memory leak in EAP-TTLS re-authentication |
| * reject WPA/WPA2 message 3/4 if it does not include any valid |
| WPA/RSN IE |
| * driver_wext: added fallback to use SIOCSIWENCODE for setting auth_alg |
| if the driver does not support SIOCSIWAUTH |
| |
| 2006-01-29 - v0.5.1 |
| * driver_test: added better support for multiple APs and STAs by using |
| a directory with sockets that include MAC address for each device in |
| the name (driver_param=test_dir=/tmp/test) |
| * added support for EAP expanded type (vendor specific EAP methods) |
| * added AP_SCAN command into ctrl_iface so that ap_scan configuration |
| option can be changed if needed |
| * wpa_cli/wpa_gui: skip non-socket files in control directory when |
| using UNIX domain sockets; this avoids selecting an incorrect |
| interface (e.g., a PID file could be in this directory, even though |
| use of this directory for something else than socket files is not |
| recommended) |
| * fixed TLS library deinitialization after RSN pre-authentication not |
| to disable TLS library for normal authentication |
| * driver_wext: Remove null-termination from SSID length if the driver |
| used it; some Linux drivers do this and they were causing problems in |
| wpa_supplicant not finding matching configuration block. This change |
| would break a case where the SSID actually ends in '\0', but that is |
| not likely to happen in real use. |
| * fixed PMKSA cache processing not to trigger deauthentication if the |
| current PMKSA cache entry is replaced with a valid new entry |
| * fixed PC/SC initialization for ap_scan != 1 modes (this fixes |
| EAP-SIM and EAP-AKA with real SIM/USIM card when using ap_scan=0 or |
| ap_scan=2) |
| |
| 2005-12-18 - v0.5.0 (beginning of 0.5.x development releases) |
| * added experimental STAKey handshake implementation for IEEE 802.11e |
| direct link setup (DLS); note: this is disabled by default in both |
| build and runtime configuration (can be enabled with CONFIG_STAKEY=y |
| and stakey=1) |
| * fixed EAP-SIM and EAP-AKA pseudonym and fast re-authentication to |
| decrypt AT_ENCR_DATA attributes correctly |
| * fixed EAP-AKA to allow resynchronization within the same session |
| * made code closer to ANSI C89 standard to make it easier to port to |
| other C libraries and compilers |
| * started moving operating system or C library specific functions into |
| wrapper functions defined in os.h and implemented in os_*.c to make |
| code more portable |
| * wpa_supplicant can now be built with Microsoft Visual C++ |
| (e.g., with the freely available Toolkit 2003 version or Visual |
| C++ 2005 Express Edition and Platform SDK); see nmake.mak for an |
| example makefile for nmake |
| * added support for using Windows registry for command line parameters |
| (CONFIG_MAIN=main_winsvc) and configuration data |
| (CONFIG_BACKEND=winreg); see win_example.reg for an example registry |
| contents; this version can be run both as a Windows service and as a |
| normal application; 'wpasvc.exe app' to start as applicant, |
| 'wpasvc.exe reg <full path to wpasvc.exe>' to register a service, |
| 'net start wpasvc' to start the service, 'wpasvc.exe unreg' to |
| unregister a service |
| * made it possible to link ndis_events.exe functionality into |
| wpa_supplicant.exe by defining CONFIG_NDIS_EVENTS_INTEGRATED |
| * added better support for multiple control interface backends |
| (CONFIG_CTRL_IFACE option); currently, 'unix' and 'udp' are supported |
| * fixed PC/SC code to use correct length for GSM AUTH command buffer |
| and to not use pioRecvPci with SCardTransmit() calls; these were not |
| causing visible problems with pcsc-lite, but Windows Winscard.dll |
| refused the previously used parameters; this fixes EAP-SIM and |
| EAP-AKA authentication using SIM/USIM card under Windows |
| * added new event loop implementation for Windows using |
| WaitForMultipleObject() instead of select() in order to allow waiting |
| for non-socket objects; this can be selected with |
| CONFIG_ELOOP=eloop_win in .config |
| * added support for selecting l2_packet implementation in .config |
| (CONFIG_L2_PACKET; following options are available now: linux, pcap, |
| winpcap, freebsd, none) |
| * added new l2_packet implementation for WinPcap |
| (CONFIG_L2_PACKET=winpcap) that uses a separate receive thread to |
| reduce latency in EAPOL receive processing from about 100 ms to about |
| 3 ms |
| * added support for EAP-FAST key derivation using other ciphers than |
| RC4-128-SHA for authentication and AES128-SHA for provisioning |
| * added support for configuring CA certificate as DER file and as a |
| configuration blob |
| * fixed private key configuration as configuration blob and added |
| support for using PKCS#12 as a blob |
| * tls_gnutls: added support for using PKCS#12 files; added support for |
| session resumption |
| * added support for loading trusted CA certificates from Windows |
| certificate store: ca_cert="cert_store://<name>", where <name> is |
| likely CA (Intermediate CA certificates) or ROOT (root certificates) |
| * added C version of ndis_events.cpp and made it possible to build this |
| with MinGW so that CONFIG_NDIS_EVENTS_INTEGRATED can be used more |
| easily on cross-compilation builds |
| * added wpasvc.exe into Windows binary release; this is an alternative |
| version of wpa_supplicant.exe with configuration backend using |
| Windows registry and with the entry point designed to run as a |
| Windows service |
| * integrated ndis_events.exe functionality into wpa_supplicant.exe and |
| wpasvc.exe and removed this additional tool from the Windows binary |
| release since it is not needed anymore |
| * load winscard.dll functions dynamically when building with MinGW |
| since MinGW does not yet include winscard library |
| |
| 2005-11-20 - v0.4.7 (beginning of 0.4.x stable releases) |
| * l2_packet_pcap: fixed wired IEEE 802.1X authentication with libpcap |
| and WinPcap to receive frames sent to PAE group address |
| * disable EAP state machine when IEEE 802.1X authentication is not used |
| in order to get rid of bogus "EAP failed" messages |
| * fixed OpenSSL error reporting to go through all pending errors to |
| avoid confusing reports of old errors being reported at later point |
| during handshake |
| * fixed configuration file updating to not write empty variables |
| (e.g., proto or key_mgmt) that the file parser would not accept |
| * fixed ADD_NETWORK ctrl_iface command to use the same default values |
| for variables as empty network definitions read from config file |
| would get |
| * fixed EAP state machine to not discard EAP-Failure messages in many |
| cases (e.g., during TLS handshake) |
| * fixed a infinite loop in private key reading if the configured file |
| cannot be parsed successfully |
| * driver_madwifi: added support for madwifi-ng |
| * wpa_gui: do not display password/PSK field contents |
| * wpa_gui: added CA certificate configuration |
| * driver_ndis: fixed scan request in ap_scan=2 mode not to change SSID |
| * driver_ndis: include Beacon IEs in AssocInfo in order to notice if |
| the new AP is using different WPA/RSN IE |
| * use longer timeout for IEEE 802.11 association to avoid problems with |
| drivers that may take more than five second to associate |
| |
| 2005-10-27 - v0.4.6 |
| * allow fallback to WPA, if mixed WPA+WPA2 networks have mismatch in |
| RSN IE, but WPA IE would match with wpa_supplicant configuration |
| * added support for named configuration blobs in order to avoid having |
| to use file system for external files (e.g., certificates); |
| variables can be set to "blob://<blob name>" instead of file path to |
| use a named blob; supported fields: pac_file, client_cert, |
| private_key |
| * fixed RSN pre-authentication (it was broken in the clean up of WPA |
| state machine interface in v0.4.5) |
| * driver_madwifi: set IEEE80211_KEY_GROUP flag for group keys to make |
| sure the driver configures broadcast decryption correctly |
| * added ca_path (and ca_path2) configuration variables that can be used |
| to configure OpenSSL CA path, e.g., /etc/ssl/certs, for using the |
| system-wide trusted CA list |
| * added support for starting wpa_supplicant without a configuration |
| file (-C argument must be used to set ctrl_interface parameter for |
| this case; in addition, -p argument can be used to provide |
| driver_param; these new arguments can also be used with a |
| configuration to override the values from the configuration) |
| * added global control interface that can be optionally used for adding |
| and removing network interfaces dynamically (-g command line argument |
| for both wpa_supplicant and wpa_cli) without having to restart |
| wpa_supplicant process |
| * wpa_gui: |
| - try to save configuration whenever something is modified |
| - added WEP key configuration |
| - added possibility to edit the current network configuration |
| * driver_ndis: fixed driver polling not to increase frequency on each |
| received EAPOL frame due to incorrectly cancelled timeout |
| * added simple configuration file examples (in examples subdirectory) |
| * fixed driver_wext.c to filter wireless events based on ifindex to |
| avoid interfaces receiving events from other interfaces |
| * delay sending initial EAPOL-Start couple of seconds to speed up |
| authentication for the most common case of Authenticator starting |
| EAP authentication immediately after association |
| |
| 2005-09-25 - v0.4.5 |
| * added a workaround for clearing keys with ndiswrapper to allow |
| roaming from WPA enabled AP to plaintext one |
| * added docbook documentation (doc/docbook) that can be used to |
| generate, e.g., man pages |
| * l2_packet_linux: use socket type SOCK_DGRAM instead of SOCK_RAW for |
| PF_PACKET in order to prepare for network devices that do not use |
| Ethernet headers (e.g., network stack that includes IEEE 802.11 |
| header in the frames) |
| * use receipt of EAPOL-Key frame as a lower layer success indication |
| for EAP state machine to allow recovery from dropped EAP-Success |
| frame |
| * cleaned up internal EAPOL frame processing by not including link |
| layer (Ethernet) header during WPA and EAPOL/EAP processing; this |
| header is added only when transmitted the frame; this makes it easier |
| to use wpa_supplicant on link layers that use different header than |
| Ethernet |
| * updated EAP-PSK to use draft 9 by default since this can now be |
| tested with hostapd; removed support for draft 3, including |
| server_nai configuration option from network blocks |
| * driver_wired: add PAE address to the multicast address list in order |
| to be able to receive EAPOL frames with drivers that do not include |
| these multicast addresses by default |
| * driver_wext: add support for WE-19 |
| * added support for multiple configuration backends (CONFIG_BACKEND |
| option); currently, only 'file' is supported (i.e., the format used |
| in wpa_supplicant.conf) |
| * added support for updating configuration ('wpa_cli save_config'); |
| this is disabled by default and can be enabled with global |
| update_config=1 variable in wpa_supplicant.conf; this allows wpa_cli |
| and wpa_gui to store the configuration changes in a permanent store |
| * added GET_NETWORK ctrl_iface command |
| (e.g., 'wpa_cli get_network 0 ssid') |
| |
| 2005-08-21 - v0.4.4 |
| * replaced OpenSSL patch for EAP-FAST support |
| (openssl-tls-extensions.patch) with a more generic and correct |
| patch (the new patch is not compatible with the previous one, so the |
| OpenSSL library will need to be patched with the new patch in order |
| to be able to build wpa_supplicant with EAP-FAST support) |
| * added support for using Windows certificate store (through CryptoAPI) |
| for client certificate and private key operations (EAP-TLS) |
| (see wpa_supplicant.conf for more information on how to configure |
| this with private_key) |
| * ported wpa_gui to Windows |
| * added Qt4 version of wpa_gui (wpa_gui-qt4 directory); this can be |
| built with the open source version of the Qt4 for Windows |
| * allow non-WPA modes (e.g., IEEE 802.1X with dynamic WEP) to be used |
| with drivers that do not support WPA |
| * ndis_events: fixed Windows 2000 support |
| * added support for enabling/disabling networks from the list of all |
| configured networks ('wpa_cli enable_network <network id>' and |
| 'wpa_cli disable_network <network id>') |
| * added support for adding and removing network from the current |
| configuration ('wpa_cli add_network' and 'wpa_cli remove_network |
| <network id>'); added networks are disabled by default and they can |
| be enabled with enable_network command once the configuration is done |
| for the new network; note: configuration file is not yet updated, so |
| these new networks are lost when wpa_supplicant is restarted |
| * added support for setting network configuration parameters through |
| the control interface, for example: |
| wpa_cli set_network 0 ssid "\"my network\"" |
| * fixed parsing of strings that include both " and # within double |
| quoted area (e.g., "start"#end") |
| * added EAP workaround for PEAP session resumption: allow outer, |
| i.e., not tunneled, EAP-Success to terminate session since; this can |
| be disabled with eap_workaround=0 |
| (this was allowed for PEAPv1 before, but now it is also allowed for |
| PEAPv0 since at least one RADIUS authentication server seems to be |
| doing this for PEAPv0, too) |
| * wpa_gui: added preliminary support for adding new networks to the |
| wpa_supplicant configuration (double click on the scan results to |
| open network configuration) |
| |
| 2005-06-26 - v0.4.3 |
| * removed interface for external EAPOL/EAP supplicant (e.g., |
| Xsupplicant), (CONFIG_XSUPPLICANT_IFACE) since it is not required |
| anymore and is unlikely to be used by anyone |
| * driver_ndis: fixed WinPcap 3.0 support |
| * fixed build with CONFIG_DNET_PCAP=y on Linux |
| * l2_packet: moved different implementations into separate files |
| (l2_packet_*.c) |
| |
| 2005-06-12 - v0.4.2 |
| * driver_ipw: updated driver structures to match with ipw2200-1.0.4 |
| (note: ipw2100-1.1.0 is likely to require an update to work with |
| this) |
| * added support for using ap_scan=2 mode with multiple network blocks; |
| wpa_supplicant will go through the networks one by one until the |
| driver reports a successful association; this uses the same order for |
| networks as scan_ssid=1 scans, i.e., the priority field is ignored |
| and the network block order in the file is used instead |
| * fixed a potential issue in RSN pre-authentication ending up using |
| freed memory if pre-authentication times out |
| * added support for matching alternative subject name extensions of the |
| authentication server certificate; new configuration variables |
| altsubject_match and altsubject_match2 |
| * driver_ndis: added support for IEEE 802.1X authentication with wired |
| NDIS drivers |
| * added support for querying private key password (EAP-TLS) through the |
| control interface (wpa_cli/wpa_gui) if one is not included in the |
| configuration file |
| * driver_broadcom: fixed couple of memory leaks in scan result |
| processing |
| * EAP-PAX is now registered as EAP type 46 |
| * fixed EAP-PAX MAC calculation |
| * fixed EAP-PAX CK and ICK key derivation |
| * added support for using password with EAP-PAX (as an alternative to |
| entering key with eappsk); SHA-1 hash of the password will be used as |
| the key in this case |
| * added support for arbitrary driver interface parameters through the |
| configuration file with a new driver_param field; this adds a new |
| driver_ops function set_param() |
| * added possibility to override l2_packet module with driver interface |
| API (new send_eapol handler); this can be used to implement driver |
| specific TX/RX functions for EAPOL frames |
| * fixed ctrl_interface_group processing for the case where gid is |
| entered as a number, not group name |
| * driver_test: added support for testing hostapd with wpa_supplicant |
| by using test driver interface without any kernel drivers or network |
| cards |
| |
| 2005-05-22 - v0.4.1 |
| * driver_madwifi: fixed WPA/WPA2 mode configuration to allow EAPOL |
| packets to be encrypted; this was apparently broken by the changed |
| ioctl order in v0.4.0 |
| * driver_madwifi: added preliminary support for compiling against 'BSD' |
| branch of madwifi CVS tree |
| * added support for EAP-MSCHAPv2 password retries within the same EAP |
| authentication session |
| * added support for password changes with EAP-MSCHAPv2 (used when the |
| password has expired) |
| * added support for reading additional certificates from PKCS#12 files |
| and adding them to the certificate chain |
| * fixed association with IEEE 802.1X (no WPA) when dynamic WEP keys |
| were used |
| * fixed a possible double free in EAP-TTLS fast-reauthentication when |
| identity or password is entered through control interface |
| * display EAP Notification messages to user through control interface |
| with "CTRL-EVENT-EAP-NOTIFICATION" prefix |
| * added GUI version of wpa_cli, wpa_gui; this is not build |
| automatically with 'make'; use 'make wpa_gui' to build (this requires |
| Qt development tools) |
| * added 'disconnect' command to control interface for setting |
| wpa_supplicant in state where it will not associate before |
| 'reassociate' command has been used |
| * added support for selecting a network from the list of all configured |
| networks ('wpa_cli select_network <network id>'; this disabled all |
| other networks; to re-enable, 'wpa_cli select_network any') |
| * added support for getting scan results through control interface |
| * added EAP workaround for PEAPv1 session resumption: allow outer, |
| i.e., not tunneled, EAP-Success to terminate session since; this can |
| be disabled with eap_workaround=0 |
| |
| 2005-04-25 - v0.4.0 (beginning of 0.4.x development releases) |
| * added a new build time option, CONFIG_NO_STDOUT_DEBUG, that can be |
| used to reduce the size of the wpa_supplicant considerably if |
| debugging code is not needed |
| * fixed EAPOL-Key validation to drop packets with invalid Key Data |
| Length; such frames could have crashed wpa_supplicant due to buffer |
| overflow |
| * added support for wired authentication (IEEE 802.1X on wired |
| Ethernet); driver interface 'wired' |
| * obsoleted set_wpa() handler in the driver interface API (it can be |
| replaced by moving enable/disable functionality into init()/deinit()) |
| (calls to set_wpa() are still present for backwards compatibility, |
| but they may be removed in the future) |
| * driver_madwifi: fixed association in plaintext mode |
| * modified the EAP workaround that accepts EAP-Success with incorrect |
| Identifier to be even less strict about verification in order to |
| interoperate with some authentication servers |
| * added support for sending TLS alerts |
| * added support for 'any' SSID wildcard; if ssid is not configured or |
| is set to an empty string, any SSID will be accepted for non-WPA AP |
| * added support for asking PIN (for SIM) from frontends (e.g., |
| wpa_cli); if a PIN is needed, but not included in the configuration |
| file, a control interface request is sent and EAP processing is |
| delayed until the PIN is available |
| * added support for using external devices (e.g., a smartcard) for |
| private key operations in EAP-TLS (CONFIG_SMARTCARD=y in .config); |
| new wpa_supplicant.conf variables: |
| - global: opensc_engine_path, pkcs11_engine_path, pkcs11_module_path |
| - network: engine, engine_id, key_id |
| * added experimental support for EAP-PAX |
| * added monitor mode for wpa_cli (-a<path to a program to run>) that |
| allows external commands (e.g., shell scripts) to be run based on |
| wpa_supplicant events, e.g., when authentication has been completed |
| and data connection is ready; other related wpa_cli arguments: |
| -B (run in background), -P (write PID file); wpa_supplicant has a new |
| command line argument (-W) that can be used to make it wait until a |
| control interface command is received in order to avoid missing |
| events |
| * added support for opportunistic WPA2 PMKSA key caching (disabled by |
| default, can be enabled with proactive_key_caching=1) |
| * fixed RSN IE in 4-Way Handshake message 2/4 for the case where |
| Authenticator rejects PMKSA caching attempt and the driver is not |
| using assoc_info events |
| * added -P<pid file> argument for wpa_supplicant to write the current |
| process id into a file |
| |
| 2005-02-12 - v0.3.7 (beginning of 0.3.x stable releases) |
| * added new phase1 option parameter, include_tls_length=1, to force |
| wpa_supplicant to add TLS Message Length field to all TLS messages |
| even if the packet is not fragmented; this may be needed with some |
| authentication servers |
| * fixed WPA/RSN IE verification in message 3 of 4-Way Handshake when |
| using drivers that take care of AP selection (e.g., when using |
| ap_scan=2) |
| * fixed reprocessing of pending request after ctrl_iface requests for |
| identity/password/otp |
| * fixed ctrl_iface requests for identity/password/otp in Phase 2 of |
| EAP-PEAP and EAP-TTLS |
| * all drivers using driver_wext: set interface up and select Managed |
| mode when starting wpa_supplicant; set interface down when exiting |
| * renamed driver_ipw2100.c to driver_ipw.c since it now supports both |
| ipw2100 and ipw2200; please note that this also changed the |
| configuration variable in .config to CONFIG_DRIVER_IPW |
| |
| 2005-01-24 - v0.3.6 |
| * fixed a busy loop introduced in v0.3.5 for scan result processing |
| when no matching AP is found |
| |
| 2005-01-23 - v0.3.5 |
| * added a workaround for an interoperability issue with a Cisco AP |
| when using WPA2-PSK |
| * fixed non-WPA IEEE 802.1X to use the same authentication timeout as |
| WPA with IEEE 802.1X (i.e., timeout 10 -> 70 sec to allow |
| retransmission of dropped frames) |
| * fixed issues with 64-bit CPUs and SHA1 cleanup in previous version |
| (e.g., segfault when processing EAPOL-Key frames) |
| * fixed EAP workaround and fast reauthentication configuration for |
| RSN pre-authentication; previously these were disabled and |
| pre-authentication would fail if the used authentication server |
| requires EAP workarounds |
| * added support for blacklisting APs that fail or timeout |
| authentication in ap_scan=1 mode so that all APs are tried in cases |
| where the ones with strongest signal level are failing authentication |
| * fixed CA certificate loading after a failed EAP-TLS/PEAP/TTLS |
| authentication attempt |
| * allow EAP-PEAP/TTLS fast reauthentication only if Phase 2 succeeded |
| in the previous authentication (previously, only Phase 1 success was |
| verified) |
| |
| 2005-01-09 - v0.3.4 |
| * added preliminary support for IBSS (ad-hoc) mode configuration |
| (mode=1 in network block); this included a new key_mgmt mode |
| WPA-NONE, i.e., TKIP or CCMP with a fixed key (based on psk) and no |
| key management; see wpa_supplicant.conf for more details and an |
| example on how to configure this (note: this is currently implemented |
| only for driver_hostapd.c, but the changes should be trivial to add |
| in associate() handler for other drivers, too (assuming the driver |
| supports WPA-None) |
| * added preliminary port for native Windows (i.e., no cygwin) using |
| mingw |
| |
| 2005-01-02 - v0.3.3 |
| * added optional support for GNU Readline and History Libraries for |
| wpa_cli (CONFIG_READLINE) |
| * cleaned up EAP state machine <-> method interface and number of |
| small problems with error case processing not terminating on |
| EAP-Failure but waiting for timeout |
| * added couple of workarounds for interoperability issues with a |
| Cisco AP when using WPA2 |
| * added support for EAP-FAST (draft-cam-winget-eap-fast-00.txt); |
| Note: This requires a patch for openssl to add support for TLS |
| extensions and number of workarounds for operations without |
| certificates. Proof of concept type of experimental patch is |
| included in openssl-tls-extensions.patch. |
| |
| 2004-12-19 - v0.3.2 |
| * fixed private key loading for cases where passphrase is not set |
| * fixed Windows/cygwin L2 packet handler freeing; previous version |
| could cause a segfault when RSN pre-authentication was completed |
| * added support for PMKSA caching with drivers that generate RSN IEs |
| (e.g., NDIS); currently, this is only implemented in driver_ndis.c, |
| but similar code can be easily added to driver_ndiswrapper.c once |
| ndiswrapper gets full support for RSN PMKSA caching |
| * improved recovery from PMKID mismatches by requesting full EAP |
| authentication in case of failed PMKSA caching attempt |
| * driver_ndis: added support for NDIS NdisMIncidateStatus() events |
| (this requires that ndis_events is ran while wpa_supplicant is |
| running) |
| * driver_ndis: use ADD_WEP/REMOVE_WEP when configuring WEP keys |
| * added support for driver interfaces to replace the interface name |
| based on driver/OS specific mapping, e.g., in case of driver_ndis, |
| this allows the beginning of the adapter description to be used as |
| the interface name |
| * added support for CR+LF (Windows-style) line ends in configuration |
| file |
| * driver_ndis: enable radio before starting scanning, disable radio |
| when exiting |
| * modified association event handler to set portEnabled = FALSE before |
| clearing port Valid in order to reset EAP state machine and avoid |
| problems with new authentication getting ignored because of state |
| machines ending up in AUTHENTICATED/SUCCESS state based on old |
| information |
| * added support for driver events to add PMKID candidates in order to |
| allow drivers to give priority to most likely roaming candidates |
| * driver_hostap: moved PrivacyInvoked configuration to associate() |
| function so that this will not be set for plaintext connections |
| * added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that driver |
| interface can distinguish plaintext and IEEE 802.1X (no WPA) |
| authentication |
| * fixed static WEP key configuration to use broadcast/default type for |
| all keys (previously, the default TX key was configured as pairwise/ |
| unicast key) |
| * driver_ndis: added legacy WPA capability detection for non-WPA2 |
| drivers |
| * added support for setting static WEP keys for IEEE 802.1X without |
| dynamic WEP keying (eapol_flags=0) |
| |
| 2004-12-12 - v0.3.1 |
| * added support for reading PKCS#12 (PFX) files (as a replacement for |
| PEM/DER) to get certificate and private key (CONFIG_PKCS12) |
| * fixed compilation with CONFIG_PCSC=y |
| * added new ap_scan mode, ap_scan=2, for drivers that take care of |
| association, but need to be configured with security policy and SSID, |
| e.g., ndiswrapper and NDIS driver; this mode should allow such |
| drivers to work with hidden SSIDs and optimized roaming; when |
| ap_scan=2 is used, only the first network block in the configuration |
| file is used and this configuration should have explicit security |
| policy (i.e., only one option in the lists) for key_mgmt, pairwise, |
| group, proto variables |
| * added experimental port of wpa_supplicant for Windows |
| - driver_ndis.c driver interface (NDIS OIDs) |
| - currently, this requires cygwin and WinPcap |
| - small utility, win_if_list, can be used to get interface name |
| * control interface can now be removed at build time; add |
| CONFIG_CTRL_IFACE=y to .config to maintain old functionality |
| * optional Xsupplicant interface can now be removed at build time; |
| (CONFIG_XSUPPLICANT_IFACE=y in .config to bring it back) |
| * added auth_alg to driver interface associate() parameters to make it |
| easier for drivers to configure authentication algorithm as part of |
| the association |
| |
| 2004-12-05 - v0.3.0 (beginning of 0.3.x development releases) |
| * driver_broadcom: added new driver interface for Broadcom wl.o driver |
| (a generic driver for Broadcom IEEE 802.11a/g cards) |
| * wpa_cli: fixed parsing of -p <path> command line argument |
| * PEAPv1: fixed tunneled EAP-Success reply handling to reply with TLS |
| ACK, not tunneled EAP-Success (of which only the first byte was |
| actually send due to a bug in previous code); this seems to |
| interoperate with most RADIUS servers that implements PEAPv1 |
| * PEAPv1: added support for terminating PEAP authentication on tunneled |
| EAP-Success message; this can be configured by adding |
| peap_outer_success=0 on phase1 parameters in wpa_supplicant.conf |
| (some RADIUS servers require this whereas others require a tunneled |
| reply |
| * PEAPv1: changed phase1 option peaplabel to use default to 0, i.e., to |
| the old label for key derivation; previously, the default was 1, |
| but it looks like most existing PEAPv1 implementations use the old |
| label which is thus more suitable default option |
| * added support for EAP-PSK (draft-bersani-eap-psk-03.txt) |
| * fixed parsing of wep_tx_keyidx |
| * added support for configuring list of allowed Phase 2 EAP types |
| (for both EAP-PEAP and EAP-TTLS) instead of only one type |
| * added support for configuring IEEE 802.11 authentication algorithm |
| (auth_alg; mainly for using Shared Key authentication with static |
| WEP keys) |
| * added support for EAP-AKA (with UMTS SIM) |
| * fixed couple of errors in PCSC handling that could have caused |
| random-looking errors for EAP-SIM |
| * added support for EAP-SIM pseudonyms and fast re-authentication |
| * added support for EAP-TLS/PEAP/TTLS fast re-authentication (TLS |
| session resumption) |
| * added support for EAP-SIM with two challenges |
| (phase1="sim_min_num_chal=3" can be used to require three challenges) |
| * added support for configuring DH/DSA parameters for an ephemeral DH |
| key exchange (EAP-TLS/PEAP/TTLS) using new configuration parameters |
| dh_file and dh_file2 (phase 2); this adds support for using DSA keys |
| and optional DH key exchange to achieve forward secracy with RSA keys |
| * added support for matching subject of the authentication server |
| certificate with a substring when using EAP-TLS/PEAP/TTLS; new |
| configuration variables subject_match and subject_match2 |
| * changed SSID configuration in driver_wext.c (used by many driver |
| interfaces) to use ssid_len+1 as the length for SSID since some Linux |
| drivers expect this |
| * fixed couple of unaligned reads in scan result parsing to fix WPA |
| connection on some platforms (e.g., ARM) |
| * added driver interface for Intel ipw2100 driver |
| * added support for LEAP with WPA |
| * added support for larger scan results report (old limit was 4 kB of |
| data, i.e., about 35 or so APs) when using Linux wireless extensions |
| v17 or newer |
| * fixed a bug in PMKSA cache processing: skip sending of EAPOL-Start |
| only if there is a PMKSA cache entry for the current AP |
| * fixed error handling for case where reading of scan results fails: |
| must schedule a new scan or wpa_supplicant will remain waiting |
| forever |
| * changed debug output to remove shared password/key material by |
| default; all key information can be included with -K command line |
| argument to match the previous behavior |
| * added support for timestamping debug log messages (disabled by |
| default, can be enabled with -t command line argument) |
| * set pairwise/group cipher suite for non-WPA IEEE 802.1X to WEP-104 |
| if keys are not configured to be used; this fixes IEEE 802.1X mode |
| with drivers that use this information to configure whether Privacy |
| bit can be in Beacon frames (e.g., ndiswrapper) |
| * avoid clearing driver keys if no keys have been configured since last |
| key clear request; this seems to improve reliability of group key |
| handshake for ndiswrapper & NDIS driver which seems to be suffering |
| of some kind of timing issue when the keys are cleared again after |
| association |
| * changed driver interface API: |
| - WPA_SUPPLICANT_DRIVER_VERSION define can be used to determine which |
| version is being used (now, this is set to 2; previously, it was |
| not defined) |
| - pass pointer to private data structure to all calls |
| - the new API is not backwards compatible; all in-tree driver |
| interfaces has been converted to the new API |
| * added support for controlling multiple interfaces (radios) per |
| wpa_supplicant process; each interface needs to be listed on the |
| command line (-c, -i, -D arguments) with -N as a separator |
| (-cwpa1.conf -iwlan0 -Dhostap -N -cwpa2.conf -iath0 -Dmadwifi) |
| * added a workaround for EAP servers that incorrectly use same Id for |
| sequential EAP packets |
| * changed libpcap/libdnet configuration to use .config variable, |
| CONFIG_DNET_PCAP, instead of requiring Makefile modification |
| * improved downgrade attack detection in IE verification of msg 3/4: |
| verify both WPA and RSN IEs, if present, not only the selected one; |
| reject the AP if an RSN IE is found in msg 3/4, but not in Beacon or |
| Probe Response frame, and RSN is enabled in wpa_supplicant |
| configuration |
| * fixed WPA msg 3/4 processing to allow Key Data field contain other |
| IEs than just one WPA IE |
| * added support for FreeBSD and driver interface for the BSD net80211 |
| layer (CONFIG_DRIVER_BSD=y in .config); please note that some of the |
| required kernel mods have not yet been committed |
| * made EAP workarounds configurable; enabled by default, can be |
| disabled with network block option eap_workaround=0 |
| |
| 2004-07-17 - v0.2.4 (beginning of 0.2.x stable releases) |
| * resolved couple of interoperability issues with EAP-PEAPv1 and |
| Phase 2 (inner EAP) fragment reassembly |
| * driver_madwifi: fixed WEP key configuration for IEEE 802.1X when the |
| AP is using non-zero key index for the unicast key and key index zero |
| for the broadcast key |
| * driver_hostap: fixed IEEE 802.1X WEP key updates and |
| re-authentication by allowing unencrypted EAPOL frames when not using |
| WPA |
| * added a new driver interface, 'wext', which uses only standard, |
| driver independent functionality in Linux wireless extensions; |
| currently, this can be used only for non-WPA IEEE 802.1X mode, but |
| eventually, this is to be extended to support full WPA/WPA2 once |
| Linux wireless extensions get support for this |
| * added support for mode in which the driver is responsible for AP |
| scanning and selection; this is disabled by default and can be |
| enabled with global ap_scan=0 variable in wpa_supplicant.conf; |
| this mode can be used, e.g., with generic 'wext' driver interface to |
| use wpa_supplicant as IEEE 802.1X Supplicant with any Linux driver |
| supporting wireless extensions. |
| * driver_madwifi: fixed WPA2 configuration and scan_ssid=1 (e.g., |
| operation with an AP that does not include SSID in the Beacon frames) |
| * added support for new EAP authentication methods: |
| EAP-TTLS/EAP-OTP, EAP-PEAPv0/OTP, EAP-PEAPv1/OTP, EAP-OTP |
| * added support for asking one-time-passwords from frontends (e.g., |
| wpa_cli); this 'otp' command works otherwise like 'password' command, |
| but the password is used only once and the frontend will be asked for |
| a new password whenever a request from authenticator requires a |
| password; this can be used with both EAP-OTP and EAP-GTC |
| * changed wpa_cli to automatically re-establish connection so that it |
| does not need to be re-started when wpa_supplicant is terminated and |
| started again |
| * improved user data (identity/password/otp) requests through |
| frontends: process pending EAPOL packets after getting new |
| information so that full authentication does not need to be |
| restarted; in addition, send pending requests again whenever a new |
| frontend is attached |
| * changed control frontends to use a new directory for socket files to |
| make it easier for wpa_cli to automatically select between interfaces |
| and to provide access control for the control interface; |
| wpa_supplicant.conf: ctrl_interface is now a path |
| (/var/run/wpa_supplicant is the recommended path) and |
| ctrl_interface_group can be used to select which group gets access to |
| the control interface; |
| wpa_cli: by default, try to connect to the first interface available |
| in /var/run/wpa_supplicant; this path can be overridden with -p option |
| and an interface can be selected with -i option (i.e., in most common |
| cases, wpa_cli does not need to get any arguments) |
| * added support for LEAP |
| * added driver interface for Linux ndiswrapper |
| * added priority option for network blocks in the configuration file; |
| this allows networks to be grouped based on priority (the scan |
| results are searched for matches with network blocks in this order) |
| |
| 2004-06-20 - v0.2.3 |
| * sort scan results to improve AP selection |
| * fixed control interface socket removal for some error cases |
| * improved scan requesting and authentication timeout |
| * small improvements/bug fixes for EAP-MSCHAPv2, EAP-PEAP, and |
| TLS processing |
| * PEAP version can now be forced with phase1="peapver=<ver>" |
| (mostly for testing; by default, the highest version supported by |
| both the Supplicant and Authentication Server is selected |
| automatically) |
| * added support for madwifi driver (Atheros ar521x) |
| * added a workaround for cases where AP sets Install Tx/Rx bit for |
| WPA Group Key messages when pairwise keys are used (without this, |
| the Group Key would be used for Tx and the AP would drop frames |
| from the station) |
| * added GSM SIM/USIM interface for GSM authentication algorithm for |
| EAP-SIM; this requires pcsc-lite |
| * added support for ATMEL AT76C5XXx driver |
| * fixed IEEE 802.1X WEP key derivation in the case where Authenticator |
| does not include key data in the EAPOL-Key frame (i.e., part of |
| EAP keying material is used as data encryption key) |
| * added support for using plaintext and static WEP networks |
| (key_mgmt=NONE) |
| |
| 2004-05-31 - v0.2.2 |
| * added support for new EAP authentication methods: |
| EAP-TTLS/EAP-MD5-Challenge |
| EAP-TTLS/EAP-GTC |
| EAP-TTLS/EAP-MSCHAPv2 |
| EAP-TTLS/EAP-TLS |
| EAP-TTLS/MSCHAPv2 |
| EAP-TTLS/MSCHAP |
| EAP-TTLS/PAP |
| EAP-TTLS/CHAP |
| EAP-PEAP/TLS |
| EAP-PEAP/GTC |
| EAP-PEAP/MD5-Challenge |
| EAP-GTC |
| EAP-SIM (not yet complete; needs GSM/SIM authentication interface) |
| * added support for anonymous identity (to be used when identity is |
| sent in plaintext; real identity will be used within TLS protected |
| tunnel (e.g., with EAP-TTLS) |
| * added event messages from wpa_supplicant to frontends, e.g., wpa_cli |
| * added support for requesting identity and password information using |
| control interface; in other words, the password for EAP-PEAP or |
| EAP-TTLS does not need to be included in the configuration file since |
| a frontand (e.g., wpa_cli) can ask it from the user |
| * improved RSN pre-authentication to use a candidate list and process |
| all candidates from each scan; not only one per scan |
| * fixed RSN IE and WPA IE capabilities field parsing |
| * ignore Tx bit in GTK IE when Pairwise keys are used |
| * avoid making new scan requests during IEEE 802.1X negotiation |
| * use openssl/libcrypto for MD5 and SHA-1 when compiling wpa_supplicant |
| with TLS support (this replaces the included implementation with |
| library code to save about 8 kB since the library code is needed |
| anyway for TLS) |
| * fixed WPA-PSK only mode when compiled without IEEE 802.1X support |
| (i.e., without CONFIG_IEEE8021X_EAPOL=y in .config) |
| |
| 2004-05-06 - v0.2.1 |
| * added support for internal IEEE 802.1X (actually, IEEE 802.1aa/D6.1) |
| Supplicant |
| - EAPOL state machines for Supplicant [IEEE 802.1aa/D6.1] |
| - EAP peer state machine [draft-ietf-eap-statemachine-02.pdf] |
| - EAP-MD5 (cannot be used with WPA-RADIUS) |
| [draft-ietf-eap-rfc2284bis-09.txt] |
| - EAP-TLS [RFC 2716] |
| - EAP-MSCHAPv2 (currently used only with EAP-PEAP) |
| - EAP-PEAP/MSCHAPv2 [draft-josefsson-pppext-eap-tls-eap-07.txt] |
| [draft-kamath-pppext-eap-mschapv2-00.txt] |
| (PEAP version 0, 1, and parts of 2; only 0 and 1 are enabled by |
| default; tested with FreeRADIUS, Microsoft IAS, and Funk Odyssey) |
| - new configuration file options: eap, identity, password, ca_cert, |
| client_cert, privatekey, private_key_passwd |
| - Xsupplicant is not required anymore, but it can be used by |
| disabling the internal IEEE 802.1X Supplicant with -e command line |
| option |
| - this code is not included in the default build; Makefile need to |
| be edited for this (uncomment lines for selected functionality) |
| - EAP-TLS and EAP-PEAP require openssl libraries |
| * use module prefix in debug messages (WPA, EAP, EAP-TLS, ..) |
| * added support for non-WPA IEEE 802.1X mode with dynamic WEP keys |
| (i.e., complete IEEE 802.1X/EAP authentication and use IEEE 802.1X |
| EAPOL-Key frames instead of WPA key handshakes) |
| * added support for IEEE 802.11i/RSN (WPA2) |
| - improved PTK Key Handshake |
| - PMKSA caching, pre-authentication |
| * fixed wpa_supplicant to ignore possible extra data after WPA |
| EAPOL-Key packets (this fixes 'Invalid EAPOL-Key MIC when using |
| TPTK' error from message 3 of 4-Way Handshake in case the AP |
| includes extra data after the EAPOL-Key) |
| * added interface for external programs (frontends) to control |
| wpa_supplicant |
| - CLI example (wpa_cli) with interactive mode and command line |
| mode |
| - replaced SIGUSR1 status/statistics with the new control interface |
| * made some feature compile time configurable |
| - .config file for make |
| - driver interfaces (hostap, hermes, ..) |
| - EAPOL/EAP functions |
| |
| 2004-02-15 - v0.2.0 |
| * Initial version of wpa_supplicant |