hostapd/defconfig - LeafOS-Project/android_external_wpa_supplicant_8 - Gitiles

 # Example hostapd build time configuration
 #
 # This file lists the configuration options that are used when building the
 # hostapd binary. All lines starting with # are ignored. Configuration option
 # lines must be commented out complete, if they are not to be included, i.e.,
 # just setting VARIABLE=n is not disabling that variable.
 #
 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
 # be modified from here. In most cass, these lines should use += in order not
 # to override previous values of the variables.

 # Driver interface for Host AP driver
 CONFIG_DRIVER_HOSTAP=y

 # Driver interface for wired authenticator
 #CONFIG_DRIVER_WIRED=y

 # Driver interface for drivers using the nl80211 kernel interface
 CONFIG_DRIVER_NL80211=y

 # QCA vendor extensions to nl80211
 #CONFIG_DRIVER_NL80211_QCA=y

 # driver_nl80211.c requires libnl. If you are compiling it yourself
 # you may need to point hostapd to your version of libnl.
 #
 #CFLAGS += -I$<path to libnl include files>
 #LIBS += -L$<path to libnl library files>

 # Use libnl v2.0 (or 3.0) libraries.
 #CONFIG_LIBNL20=y

 # Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
 CONFIG_LIBNL32=y


 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
 #CONFIG_DRIVER_BSD=y
 #CFLAGS += -I/usr/local/include
 #LIBS += -L/usr/local/lib
 #LIBS_p += -L/usr/local/lib
 #LIBS_c += -L/usr/local/lib

 # Driver interface for no driver (e.g., RADIUS server only)
 #CONFIG_DRIVER_NONE=y

 # WPA2/IEEE 802.11i RSN pre-authentication
 CONFIG_RSN_PREAUTH=y

 # Support Operating Channel Validation
 #CONFIG_OCV=y

 # Integrated EAP server
 CONFIG_EAP=y

 # EAP Re-authentication Protocol (ERP) in integrated EAP server
 CONFIG_ERP=y

 # EAP-MD5 for the integrated EAP server
 CONFIG_EAP_MD5=y

 # EAP-TLS for the integrated EAP server
 CONFIG_EAP_TLS=y

 # EAP-MSCHAPv2 for the integrated EAP server
 CONFIG_EAP_MSCHAPV2=y

 # EAP-PEAP for the integrated EAP server
 CONFIG_EAP_PEAP=y

 # EAP-GTC for the integrated EAP server
 CONFIG_EAP_GTC=y

 # EAP-TTLS for the integrated EAP server
 CONFIG_EAP_TTLS=y

 # EAP-SIM for the integrated EAP server
 #CONFIG_EAP_SIM=y

 # EAP-AKA for the integrated EAP server
 #CONFIG_EAP_AKA=y

 # EAP-AKA' for the integrated EAP server
 # This requires CONFIG_EAP_AKA to be enabled, too.
 #CONFIG_EAP_AKA_PRIME=y

 # EAP-PAX for the integrated EAP server
 #CONFIG_EAP_PAX=y

 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
 #CONFIG_EAP_PSK=y

 # EAP-pwd for the integrated EAP server (secure authentication with a password)
 #CONFIG_EAP_PWD=y

 # EAP-SAKE for the integrated EAP server
 #CONFIG_EAP_SAKE=y

 # EAP-GPSK for the integrated EAP server
 #CONFIG_EAP_GPSK=y
 # Include support for optional SHA256 cipher suite in EAP-GPSK
 #CONFIG_EAP_GPSK_SHA256=y

 # EAP-FAST for the integrated EAP server
 #CONFIG_EAP_FAST=y

 # EAP-TEAP for the integrated EAP server
 # Note: The current EAP-TEAP implementation is experimental and should not be
 # enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
 # of conflicting statements and missing details and the implementation has
 # vendor specific workarounds for those and as such, may not interoperate with
 # any other implementation. This should not be used for anything else than
 # experimentation and interoperability testing until those issues has been
 # resolved.
 #CONFIG_EAP_TEAP=y

 # Wi-Fi Protected Setup (WPS)
 #CONFIG_WPS=y
 # Enable UPnP support for external WPS Registrars
 #CONFIG_WPS_UPNP=y
 # Enable WPS support with NFC config method
 #CONFIG_WPS_NFC=y

 # EAP-IKEv2
 #CONFIG_EAP_IKEV2=y

 # Trusted Network Connect (EAP-TNC)
 #CONFIG_EAP_TNC=y

 # EAP-EKE for the integrated EAP server
 #CONFIG_EAP_EKE=y

 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y

 # RADIUS authentication server. This provides access to the integrated EAP
 # server from external hosts using RADIUS.
 #CONFIG_RADIUS_SERVER=y

 # Build IPv6 support for RADIUS operations
 CONFIG_IPV6=y

 # IEEE Std 802.11r-2008 (Fast BSS Transition)
 #CONFIG_IEEE80211R=y

 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
 # the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
 #CONFIG_DRIVER_RADIUS_ACL=y

 # Wireless Network Management (IEEE Std 802.11v-2011)
 # Note: This is experimental and not complete implementation.
 #CONFIG_WNM=y

 # IEEE 802.11ac (Very High Throughput) support
 #CONFIG_IEEE80211AC=y

 # IEEE 802.11ax HE support
 #CONFIG_IEEE80211AX=y

 # IEEE 802.11be EHT support
 # CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
 # Note: This is experimental and work in progress. The definitions are still
 # subject to change and this should not be expected to interoperate with the
 # final IEEE 802.11be version.
 #CONFIG_IEEE80211BE=y

 # Simultaneous Authentication of Equals (SAE), WPA3-Personal
 #CONFIG_SAE=y

 # SAE Public Key, WPA3-Personal
 #CONFIG_SAE_PK=y

 # Remove debugging code that is printing out debug messages to stdout.
 # This can be used to reduce the size of the hostapd considerably if debugging
 # code is not needed.
 #CONFIG_NO_STDOUT_DEBUG=y

 # Add support for writing debug log to a file: -f /tmp/hostapd.log
 # Disabled by default.
 #CONFIG_DEBUG_FILE=y

 # Send debug messages to syslog instead of stdout
 #CONFIG_DEBUG_SYSLOG=y

 # Add support for sending all debug messages (regardless of debug verbosity)
 # to the Linux kernel tracing facility. This helps debug the entire stack by
 # making it easy to record everything happening from the driver up into the
 # same file, e.g., using trace-cmd.
 #CONFIG_DEBUG_LINUX_TRACING=y

 # Remove support for RADIUS accounting
 #CONFIG_NO_ACCOUNTING=y

 # Remove support for RADIUS
 #CONFIG_NO_RADIUS=y

 # Remove support for VLANs
 #CONFIG_NO_VLAN=y

 # Enable support for fully dynamic VLANs. This enables hostapd to
 # automatically create bridge and VLAN interfaces if necessary.
 #CONFIG_FULL_DYNAMIC_VLAN=y

 # Use netlink-based kernel API for VLAN operations instead of ioctl()
 # Note: This requires libnl 3.1 or newer.
 #CONFIG_VLAN_NETLINK=y

 # Remove support for dumping internal state through control interface commands
 # This can be used to reduce binary size at the cost of disabling a debugging
 # option.
 #CONFIG_NO_DUMP_STATE=y

 # Enable tracing code for developer debugging
 # This tracks use of memory allocations and other registrations and reports
 # incorrect use with a backtrace of call (or allocation) location.
 #CONFIG_WPA_TRACE=y
 # For BSD, comment out these.
 #LIBS += -lexecinfo
 #LIBS_p += -lexecinfo
 #LIBS_c += -lexecinfo

 # Use libbfd to get more details for developer debugging
 # This enables use of libbfd to get more detailed symbols for the backtraces
 # generated by CONFIG_WPA_TRACE=y.
 #CONFIG_WPA_TRACE_BFD=y
 # For BSD, comment out these.
 #LIBS += -lbfd -liberty -lz
 #LIBS_p += -lbfd -liberty -lz
 #LIBS_c += -lbfd -liberty -lz

 # hostapd depends on strong random number generation being available from the
 # operating system. os_get_random() function is used to fetch random data when
 # needed, e.g., for key generation. On Linux and BSD systems, this works by
 # reading /dev/urandom. It should be noted that the OS entropy pool needs to be
 # properly initialized before hostapd is started. This is important especially
 # on embedded devices that do not have a hardware random number generator and
 # may by default start up with minimal entropy available for random number
 # generation.
 #
 # As a safety net, hostapd is by default trying to internally collect
 # additional entropy for generating random data to mix in with the data
 # fetched from the OS. This by itself is not considered to be very strong, but
 # it may help in cases where the system pool is not initialized properly.
 # However, it is very strongly recommended that the system pool is initialized
 # with enough entropy either by using hardware assisted random number
 # generator or by storing state over device reboots.
 #
 # hostapd can be configured to maintain its own entropy store over restarts to
 # enhance random number generation. This is not perfect, but it is much more
 # secure than using the same sequence of random numbers after every reboot.
 # This can be enabled with -e<entropy file> command line option. The specified
 # file needs to be readable and writable by hostapd.
 #
 # If the os_get_random() is known to provide strong random data (e.g., on
 # Linux/BSD, the board in question is known to have reliable source of random
 # data from /dev/urandom), the internal hostapd random pool can be disabled.
 # This will save some in binary size and CPU use. However, this should only be
 # considered for builds that are known to be used on devices that meet the
 # requirements described above.
 #CONFIG_NO_RANDOM_POOL=y

 # Should we attempt to use the getrandom(2) call that provides more reliable
 # yet secure randomness source than /dev/random on Linux 3.17 and newer.
 # Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
 #CONFIG_GETRANDOM=y

 # Should we use poll instead of select? Select is used by default.
 #CONFIG_ELOOP_POLL=y

 # Should we use epoll instead of select? Select is used by default.
 #CONFIG_ELOOP_EPOLL=y

 # Should we use kqueue instead of select? Select is used by default.
 #CONFIG_ELOOP_KQUEUE=y

 # Select TLS implementation
 # openssl = OpenSSL (default)
 # gnutls = GnuTLS
 # internal = Internal TLSv1 implementation (experimental)
 # linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
 # none = Empty template
 #CONFIG_TLS=openssl

 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
 # can be enabled to get a stronger construction of messages when block ciphers
 # are used.
 #CONFIG_TLSV11=y

 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
 # can be enabled to enable use of stronger crypto algorithms.
 #CONFIG_TLSV12=y

 # Select which ciphers to use by default with OpenSSL if the user does not
 # specify them.
 #CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"

 # If CONFIG_TLS=internal is used, additional library and include paths are
 # needed for LibTomMath. Alternatively, an integrated, minimal version of
 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
 # and drawbacks of this option.
 #CONFIG_INTERNAL_LIBTOMMATH=y
 #ifndef CONFIG_INTERNAL_LIBTOMMATH
 #LTM_PATH=/usr/src/libtommath-0.39
 #CFLAGS += -I$(LTM_PATH)
 #LIBS += -L$(LTM_PATH)
 #LIBS_p += -L$(LTM_PATH)
 #endif
 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
 # can be configured to include faster routines for exptmod, sqr, and div to
 # speed up DH and RSA calculation considerably
 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y

 # Interworking (IEEE 802.11u)
 # This can be used to enable functionality to improve interworking with
 # external networks.
 #CONFIG_INTERWORKING=y

 # Hotspot 2.0
 #CONFIG_HS20=y

 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
 #CONFIG_SQLITE=y

 # Enable Fast Session Transfer (FST)
 #CONFIG_FST=y

 # Enable CLI commands for FST testing
 #CONFIG_FST_TEST=y

 # Testing options
 # This can be used to enable some testing options (see also the example
 # configuration file) that are really useful only for testing clients that
 # connect to this hostapd. These options allow, for example, to drop a
 # certain percentage of probe requests or auth/(re)assoc frames.
 #
 #CONFIG_TESTING_OPTIONS=y

 # Automatic Channel Selection
 # This will allow hostapd to pick the channel automatically when channel is set
 # to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
 # similar way.
 #
 # Automatic selection is currently only done through initialization, later on
 # we hope to do background checks to keep us moving to more ideal channels as
 # time goes by. ACS is currently only supported through the nl80211 driver and
 # your driver must have survey dump capability that is filled by the driver
 # during scanning.
 #
 # You can customize the ACS survey algorithm with the hostapd.conf variable
 # acs_num_scans.
 #
 # Supported ACS drivers:
 # * ath9k
 # * ath5k
 # * ath10k
 #
 # For more details refer to:
 # https://wireless.wiki.kernel.org/en/users/documentation/acs
 #
 #CONFIG_ACS=y

 # Multiband Operation support
 # These extensions facilitate efficient use of multiple frequency bands
 # available to the AP and the devices that may associate with it.
 #CONFIG_MBO=y

 # Client Taxonomy
 # Has the AP retain the Probe Request and (Re)Association Request frames from
 # a client, from which a signature can be produced which can identify the model
 # of client device like "Nexus 6P" or "iPhone 5s".
 #CONFIG_TAXONOMY=y

 # Fast Initial Link Setup (FILS) (IEEE 802.11ai)
 #CONFIG_FILS=y
 # FILS shared key authentication with PFS
 #CONFIG_FILS_SK_PFS=y

 # Include internal line edit mode in hostapd_cli. This can be used to provide
 # limited command line editing and history support.
 #CONFIG_WPA_CLI_EDIT=y

 # Opportunistic Wireless Encryption (OWE)
 # Experimental implementation of draft-harkins-owe-07.txt
 #CONFIG_OWE=y

 # WLAN Authentication and Privacy Infrastructure (WAPI): interface only.
 # Configure the building of the interface which allows WAPI configuration.
 # Note: does not configure WAPI implementation itself.
 #CONFIG_WAPI_INTERFACE=y

 # Airtime policy support
 #CONFIG_AIRTIME_POLICY=y

 # Override default value for the wpa_disable_eapol_key_retries configuration
 # parameter. See that parameter in hostapd.conf for more details.
 #CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1

 # Wired equivalent privacy (WEP)
 # WEP is an obsolete cryptographic data confidentiality algorithm that is not
 # considered secure. It should not be used for anything anymore. The
 # functionality needed to use WEP is available in the current hostapd
 # release under this optional build parameter. This functionality is subject to
 # be completely removed in a future release.
 #CONFIG_WEP=y

 # Remove all TKIP functionality
 # TKIP is an old cryptographic data confidentiality algorithm that is not
 # considered secure. It should not be used anymore. For now, the default hostapd
 # build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but
 # that functionality is subject to be removed in the future.
 #CONFIG_NO_TKIP=y

 # Pre-Association Security Negotiation (PASN)
 # Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
 # design is still subject to change. As such, this should not yet be enabled in
 # production use.
 # This requires CONFIG_IEEE80211W=y to be enabled, too.
 #CONFIG_PASN=y

 # Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
 CONFIG_DPP=y
 # DPP version 2 support
 CONFIG_DPP2=y
 # DPP version 3 support (experimental and still changing; do not enable for
 # production use)
 #CONFIG_DPP3=y
	# Example hostapd build time configuration
	#
	# This file lists the configuration options that are used when building the
	# hostapd binary. All lines starting with # are ignored. Configuration option
	# lines must be commented out complete, if they are not to be included, i.e.,
	# just setting VARIABLE=n is not disabling that variable.
	#
	# This file is included in Makefile, so variables like CFLAGS and LIBS can also
	# be modified from here. In most cass, these lines should use += in order not
	# to override previous values of the variables.

	# Driver interface for Host AP driver
	CONFIG_DRIVER_HOSTAP=y

	# Driver interface for wired authenticator
	#CONFIG_DRIVER_WIRED=y

	# Driver interface for drivers using the nl80211 kernel interface
	CONFIG_DRIVER_NL80211=y

	# QCA vendor extensions to nl80211
	#CONFIG_DRIVER_NL80211_QCA=y

	# driver_nl80211.c requires libnl. If you are compiling it yourself
	# you may need to point hostapd to your version of libnl.
	#
	#CFLAGS += -I$<path to libnl include files>
	#LIBS += -L$<path to libnl library files>

	# Use libnl v2.0 (or 3.0) libraries.
	#CONFIG_LIBNL20=y

	# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
	CONFIG_LIBNL32=y


	# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
	#CONFIG_DRIVER_BSD=y
	#CFLAGS += -I/usr/local/include
	#LIBS += -L/usr/local/lib
	#LIBS_p += -L/usr/local/lib
	#LIBS_c += -L/usr/local/lib

	# Driver interface for no driver (e.g., RADIUS server only)
	#CONFIG_DRIVER_NONE=y

	# WPA2/IEEE 802.11i RSN pre-authentication
	CONFIG_RSN_PREAUTH=y

	# Support Operating Channel Validation
	#CONFIG_OCV=y

	# Integrated EAP server
	CONFIG_EAP=y

	# EAP Re-authentication Protocol (ERP) in integrated EAP server
	CONFIG_ERP=y

	# EAP-MD5 for the integrated EAP server
	CONFIG_EAP_MD5=y

	# EAP-TLS for the integrated EAP server
	CONFIG_EAP_TLS=y

	# EAP-MSCHAPv2 for the integrated EAP server
	CONFIG_EAP_MSCHAPV2=y

	# EAP-PEAP for the integrated EAP server
	CONFIG_EAP_PEAP=y

	# EAP-GTC for the integrated EAP server
	CONFIG_EAP_GTC=y

	# EAP-TTLS for the integrated EAP server
	CONFIG_EAP_TTLS=y

	# EAP-SIM for the integrated EAP server
	#CONFIG_EAP_SIM=y

	# EAP-AKA for the integrated EAP server
	#CONFIG_EAP_AKA=y

	# EAP-AKA' for the integrated EAP server
	# This requires CONFIG_EAP_AKA to be enabled, too.
	#CONFIG_EAP_AKA_PRIME=y

	# EAP-PAX for the integrated EAP server
	#CONFIG_EAP_PAX=y

	# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
	#CONFIG_EAP_PSK=y

	# EAP-pwd for the integrated EAP server (secure authentication with a password)
	#CONFIG_EAP_PWD=y

	# EAP-SAKE for the integrated EAP server
	#CONFIG_EAP_SAKE=y

	# EAP-GPSK for the integrated EAP server
	#CONFIG_EAP_GPSK=y
	# Include support for optional SHA256 cipher suite in EAP-GPSK
	#CONFIG_EAP_GPSK_SHA256=y

	# EAP-FAST for the integrated EAP server
	#CONFIG_EAP_FAST=y

	# EAP-TEAP for the integrated EAP server
	# Note: The current EAP-TEAP implementation is experimental and should not be
	# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
	# of conflicting statements and missing details and the implementation has
	# vendor specific workarounds for those and as such, may not interoperate with
	# any other implementation. This should not be used for anything else than
	# experimentation and interoperability testing until those issues has been
	# resolved.
	#CONFIG_EAP_TEAP=y

	# Wi-Fi Protected Setup (WPS)
	#CONFIG_WPS=y
	# Enable UPnP support for external WPS Registrars
	#CONFIG_WPS_UPNP=y
	# Enable WPS support with NFC config method
	#CONFIG_WPS_NFC=y

	# EAP-IKEv2
	#CONFIG_EAP_IKEV2=y

	# Trusted Network Connect (EAP-TNC)
	#CONFIG_EAP_TNC=y

	# EAP-EKE for the integrated EAP server
	#CONFIG_EAP_EKE=y

	# PKCS#12 (PFX) support (used to read private key and certificate file from
	# a file that usually has extension .p12 or .pfx)
	CONFIG_PKCS12=y

	# RADIUS authentication server. This provides access to the integrated EAP
	# server from external hosts using RADIUS.
	#CONFIG_RADIUS_SERVER=y

	# Build IPv6 support for RADIUS operations
	CONFIG_IPV6=y

	# IEEE Std 802.11r-2008 (Fast BSS Transition)
	#CONFIG_IEEE80211R=y

	# Use the hostapd's IEEE 802.11 authentication (ACL), but without
	# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
	#CONFIG_DRIVER_RADIUS_ACL=y

	# Wireless Network Management (IEEE Std 802.11v-2011)
	# Note: This is experimental and not complete implementation.
	#CONFIG_WNM=y

	# IEEE 802.11ac (Very High Throughput) support
	#CONFIG_IEEE80211AC=y

	# IEEE 802.11ax HE support
	#CONFIG_IEEE80211AX=y

	# IEEE 802.11be EHT support
	# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
	# Note: This is experimental and work in progress. The definitions are still
	# subject to change and this should not be expected to interoperate with the
	# final IEEE 802.11be version.
	#CONFIG_IEEE80211BE=y

	# Simultaneous Authentication of Equals (SAE), WPA3-Personal
	#CONFIG_SAE=y

	# SAE Public Key, WPA3-Personal
	#CONFIG_SAE_PK=y

	# Remove debugging code that is printing out debug messages to stdout.
	# This can be used to reduce the size of the hostapd considerably if debugging
	# code is not needed.
	#CONFIG_NO_STDOUT_DEBUG=y

	# Add support for writing debug log to a file: -f /tmp/hostapd.log
	# Disabled by default.
	#CONFIG_DEBUG_FILE=y

	# Send debug messages to syslog instead of stdout
	#CONFIG_DEBUG_SYSLOG=y

	# Add support for sending all debug messages (regardless of debug verbosity)
	# to the Linux kernel tracing facility. This helps debug the entire stack by
	# making it easy to record everything happening from the driver up into the
	# same file, e.g., using trace-cmd.
	#CONFIG_DEBUG_LINUX_TRACING=y

	# Remove support for RADIUS accounting
	#CONFIG_NO_ACCOUNTING=y

	# Remove support for RADIUS
	#CONFIG_NO_RADIUS=y

	# Remove support for VLANs
	#CONFIG_NO_VLAN=y

	# Enable support for fully dynamic VLANs. This enables hostapd to
	# automatically create bridge and VLAN interfaces if necessary.
	#CONFIG_FULL_DYNAMIC_VLAN=y

	# Use netlink-based kernel API for VLAN operations instead of ioctl()
	# Note: This requires libnl 3.1 or newer.
	#CONFIG_VLAN_NETLINK=y

	# Remove support for dumping internal state through control interface commands
	# This can be used to reduce binary size at the cost of disabling a debugging
	# option.
	#CONFIG_NO_DUMP_STATE=y

	# Enable tracing code for developer debugging
	# This tracks use of memory allocations and other registrations and reports
	# incorrect use with a backtrace of call (or allocation) location.
	#CONFIG_WPA_TRACE=y
	# For BSD, comment out these.
	#LIBS += -lexecinfo
	#LIBS_p += -lexecinfo
	#LIBS_c += -lexecinfo

	# Use libbfd to get more details for developer debugging
	# This enables use of libbfd to get more detailed symbols for the backtraces
	# generated by CONFIG_WPA_TRACE=y.
	#CONFIG_WPA_TRACE_BFD=y
	# For BSD, comment out these.
	#LIBS += -lbfd -liberty -lz
	#LIBS_p += -lbfd -liberty -lz
	#LIBS_c += -lbfd -liberty -lz

	# hostapd depends on strong random number generation being available from the
	# operating system. os_get_random() function is used to fetch random data when
	# needed, e.g., for key generation. On Linux and BSD systems, this works by
	# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
	# properly initialized before hostapd is started. This is important especially
	# on embedded devices that do not have a hardware random number generator and
	# may by default start up with minimal entropy available for random number
	# generation.
	#
	# As a safety net, hostapd is by default trying to internally collect
	# additional entropy for generating random data to mix in with the data
	# fetched from the OS. This by itself is not considered to be very strong, but
	# it may help in cases where the system pool is not initialized properly.
	# However, it is very strongly recommended that the system pool is initialized
	# with enough entropy either by using hardware assisted random number
	# generator or by storing state over device reboots.
	#
	# hostapd can be configured to maintain its own entropy store over restarts to
	# enhance random number generation. This is not perfect, but it is much more
	# secure than using the same sequence of random numbers after every reboot.
	# This can be enabled with -e<entropy file> command line option. The specified
	# file needs to be readable and writable by hostapd.
	#
	# If the os_get_random() is known to provide strong random data (e.g., on
	# Linux/BSD, the board in question is known to have reliable source of random
	# data from /dev/urandom), the internal hostapd random pool can be disabled.
	# This will save some in binary size and CPU use. However, this should only be
	# considered for builds that are known to be used on devices that meet the
	# requirements described above.
	#CONFIG_NO_RANDOM_POOL=y

	# Should we attempt to use the getrandom(2) call that provides more reliable
	# yet secure randomness source than /dev/random on Linux 3.17 and newer.
	# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
	#CONFIG_GETRANDOM=y

	# Should we use poll instead of select? Select is used by default.
	#CONFIG_ELOOP_POLL=y

	# Should we use epoll instead of select? Select is used by default.
	#CONFIG_ELOOP_EPOLL=y

	# Should we use kqueue instead of select? Select is used by default.
	#CONFIG_ELOOP_KQUEUE=y

	# Select TLS implementation
	# openssl = OpenSSL (default)
	# gnutls = GnuTLS
	# internal = Internal TLSv1 implementation (experimental)
	# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
	# none = Empty template
	#CONFIG_TLS=openssl

	# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
	# can be enabled to get a stronger construction of messages when block ciphers
	# are used.
	#CONFIG_TLSV11=y

	# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
	# can be enabled to enable use of stronger crypto algorithms.
	#CONFIG_TLSV12=y

	# Select which ciphers to use by default with OpenSSL if the user does not
	# specify them.
	#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"

	# If CONFIG_TLS=internal is used, additional library and include paths are
	# needed for LibTomMath. Alternatively, an integrated, minimal version of
	# LibTomMath can be used. See beginning of libtommath.c for details on benefits
	# and drawbacks of this option.
	#CONFIG_INTERNAL_LIBTOMMATH=y
	#ifndef CONFIG_INTERNAL_LIBTOMMATH
	#LTM_PATH=/usr/src/libtommath-0.39
	#CFLAGS += -I$(LTM_PATH)
	#LIBS += -L$(LTM_PATH)
	#LIBS_p += -L$(LTM_PATH)
	#endif
	# At the cost of about 4 kB of additional binary size, the internal LibTomMath
	# can be configured to include faster routines for exptmod, sqr, and div to
	# speed up DH and RSA calculation considerably
	#CONFIG_INTERNAL_LIBTOMMATH_FAST=y

	# Interworking (IEEE 802.11u)
	# This can be used to enable functionality to improve interworking with
	# external networks.
	#CONFIG_INTERWORKING=y

	# Hotspot 2.0
	#CONFIG_HS20=y

	# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
	#CONFIG_SQLITE=y

	# Enable Fast Session Transfer (FST)
	#CONFIG_FST=y

	# Enable CLI commands for FST testing
	#CONFIG_FST_TEST=y

	# Testing options
	# This can be used to enable some testing options (see also the example
	# configuration file) that are really useful only for testing clients that
	# connect to this hostapd. These options allow, for example, to drop a
	# certain percentage of probe requests or auth/(re)assoc frames.
	#
	#CONFIG_TESTING_OPTIONS=y

	# Automatic Channel Selection
	# This will allow hostapd to pick the channel automatically when channel is set
	# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
	# similar way.
	#
	# Automatic selection is currently only done through initialization, later on
	# we hope to do background checks to keep us moving to more ideal channels as
	# time goes by. ACS is currently only supported through the nl80211 driver and
	# your driver must have survey dump capability that is filled by the driver
	# during scanning.
	#
	# You can customize the ACS survey algorithm with the hostapd.conf variable
	# acs_num_scans.
	#
	# Supported ACS drivers:
	# * ath9k
	# * ath5k
	# * ath10k
	#
	# For more details refer to:
	# https://wireless.wiki.kernel.org/en/users/documentation/acs
	#
	#CONFIG_ACS=y

	# Multiband Operation support
	# These extensions facilitate efficient use of multiple frequency bands
	# available to the AP and the devices that may associate with it.
	#CONFIG_MBO=y

	# Client Taxonomy
	# Has the AP retain the Probe Request and (Re)Association Request frames from
	# a client, from which a signature can be produced which can identify the model
	# of client device like "Nexus 6P" or "iPhone 5s".
	#CONFIG_TAXONOMY=y

	# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
	#CONFIG_FILS=y
	# FILS shared key authentication with PFS
	#CONFIG_FILS_SK_PFS=y

	# Include internal line edit mode in hostapd_cli. This can be used to provide
	# limited command line editing and history support.
	#CONFIG_WPA_CLI_EDIT=y

	# Opportunistic Wireless Encryption (OWE)
	# Experimental implementation of draft-harkins-owe-07.txt
	#CONFIG_OWE=y

	# WLAN Authentication and Privacy Infrastructure (WAPI): interface only.
	# Configure the building of the interface which allows WAPI configuration.
	# Note: does not configure WAPI implementation itself.
	#CONFIG_WAPI_INTERFACE=y

	# Airtime policy support
	#CONFIG_AIRTIME_POLICY=y

	# Override default value for the wpa_disable_eapol_key_retries configuration
	# parameter. See that parameter in hostapd.conf for more details.
	#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1

	# Wired equivalent privacy (WEP)
	# WEP is an obsolete cryptographic data confidentiality algorithm that is not
	# considered secure. It should not be used for anything anymore. The
	# functionality needed to use WEP is available in the current hostapd
	# release under this optional build parameter. This functionality is subject to
	# be completely removed in a future release.
	#CONFIG_WEP=y

	# Remove all TKIP functionality
	# TKIP is an old cryptographic data confidentiality algorithm that is not
	# considered secure. It should not be used anymore. For now, the default hostapd
	# build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but
	# that functionality is subject to be removed in the future.
	#CONFIG_NO_TKIP=y

	# Pre-Association Security Negotiation (PASN)
	# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
	# design is still subject to change. As such, this should not yet be enabled in
	# production use.
	# This requires CONFIG_IEEE80211W=y to be enabled, too.
	#CONFIG_PASN=y

	# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
	CONFIG_DPP=y
	# DPP version 2 support
	CONFIG_DPP2=y
	# DPP version 3 support (experimental and still changing; do not enable for
	# production use)
	#CONFIG_DPP3=y