| /* |
| * WPA Supplicant - WPA state machine and EAPOL-Key processing |
| * Copyright (c) 2003-2018, Jouni Malinen <j@w1.fi> |
| * Copyright(c) 2015 Intel Deutschland GmbH |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| */ |
| |
| #include "includes.h" |
| |
| #include "common.h" |
| #include "crypto/aes.h" |
| #include "crypto/aes_wrap.h" |
| #include "crypto/crypto.h" |
| #include "crypto/random.h" |
| #include "crypto/aes_siv.h" |
| #include "crypto/sha256.h" |
| #include "crypto/sha384.h" |
| #include "crypto/sha512.h" |
| #include "common/ieee802_11_defs.h" |
| #include "common/ieee802_11_common.h" |
| #include "common/ocv.h" |
| #include "common/dpp.h" |
| #include "common/wpa_ctrl.h" |
| #include "eap_common/eap_defs.h" |
| #include "eapol_supp/eapol_supp_sm.h" |
| #include "drivers/driver.h" |
| #include "wpa.h" |
| #include "eloop.h" |
| #include "preauth.h" |
| #include "pmksa_cache.h" |
| #include "wpa_i.h" |
| #include "wpa_ie.h" |
| #include "wpa_supplicant_i.h" |
| #include "driver_i.h" |
| |
| static const u8 null_rsc[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| |
| /** |
| * wpa_eapol_key_send - Send WPA/RSN EAPOL-Key message |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @ptk: PTK for Key Confirmation/Encryption Key |
| * @ver: Version field from Key Info |
| * @dest: Destination address for the frame |
| * @proto: Ethertype (usually ETH_P_EAPOL) |
| * @msg: EAPOL-Key message |
| * @msg_len: Length of message |
| * @key_mic: Pointer to the buffer to which the EAPOL-Key MIC is written |
| * Returns: >= 0 on success, < 0 on failure |
| */ |
| int wpa_eapol_key_send(struct wpa_sm *sm, struct wpa_ptk *ptk, |
| int ver, const u8 *dest, u16 proto, |
| u8 *msg, size_t msg_len, u8 *key_mic) |
| { |
| int ret = -1; |
| size_t mic_len = wpa_mic_len(sm->key_mgmt, sm->pmk_len); |
| |
| wpa_printf(MSG_DEBUG, "WPA: Send EAPOL-Key frame to " MACSTR |
| " ver=%d mic_len=%d key_mgmt=0x%x", |
| MAC2STR(dest), ver, (int) mic_len, sm->key_mgmt); |
| if (is_zero_ether_addr(dest) && is_zero_ether_addr(sm->bssid)) { |
| /* |
| * Association event was not yet received; try to fetch |
| * BSSID from the driver. |
| */ |
| if (wpa_sm_get_bssid(sm, sm->bssid) < 0) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Failed to read BSSID for " |
| "EAPOL-Key destination address"); |
| } else { |
| dest = sm->bssid; |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Use BSSID (" MACSTR |
| ") as the destination for EAPOL-Key", |
| MAC2STR(dest)); |
| } |
| } |
| |
| if (mic_len) { |
| if (key_mic && (!ptk || !ptk->kck_len)) |
| goto out; |
| |
| if (key_mic && |
| wpa_eapol_key_mic(ptk->kck, ptk->kck_len, sm->key_mgmt, ver, |
| msg, msg_len, key_mic)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_ERROR, |
| "WPA: Failed to generate EAPOL-Key version %d key_mgmt 0x%x MIC", |
| ver, sm->key_mgmt); |
| goto out; |
| } |
| if (ptk) |
| wpa_hexdump_key(MSG_DEBUG, "WPA: KCK", |
| ptk->kck, ptk->kck_len); |
| wpa_hexdump(MSG_DEBUG, "WPA: Derived Key MIC", |
| key_mic, mic_len); |
| } else { |
| #ifdef CONFIG_FILS |
| /* AEAD cipher - Key MIC field not used */ |
| struct ieee802_1x_hdr *s_hdr, *hdr; |
| struct wpa_eapol_key *s_key, *key; |
| u8 *buf, *s_key_data, *key_data; |
| size_t buf_len = msg_len + AES_BLOCK_SIZE; |
| size_t key_data_len; |
| u16 eapol_len; |
| const u8 *aad[1]; |
| size_t aad_len[1]; |
| |
| if (!ptk || !ptk->kek_len) |
| goto out; |
| |
| key_data_len = msg_len - sizeof(struct ieee802_1x_hdr) - |
| sizeof(struct wpa_eapol_key) - 2; |
| |
| buf = os_malloc(buf_len); |
| if (!buf) |
| goto out; |
| |
| os_memcpy(buf, msg, msg_len); |
| hdr = (struct ieee802_1x_hdr *) buf; |
| key = (struct wpa_eapol_key *) (hdr + 1); |
| key_data = ((u8 *) (key + 1)) + 2; |
| |
| /* Update EAPOL header to include AES-SIV overhead */ |
| eapol_len = be_to_host16(hdr->length); |
| eapol_len += AES_BLOCK_SIZE; |
| hdr->length = host_to_be16(eapol_len); |
| |
| /* Update Key Data Length field to include AES-SIV overhead */ |
| WPA_PUT_BE16((u8 *) (key + 1), AES_BLOCK_SIZE + key_data_len); |
| |
| s_hdr = (struct ieee802_1x_hdr *) msg; |
| s_key = (struct wpa_eapol_key *) (s_hdr + 1); |
| s_key_data = ((u8 *) (s_key + 1)) + 2; |
| |
| wpa_hexdump_key(MSG_DEBUG, "WPA: Plaintext Key Data", |
| s_key_data, key_data_len); |
| |
| wpa_hexdump_key(MSG_DEBUG, "WPA: KEK", ptk->kek, ptk->kek_len); |
| /* AES-SIV AAD from EAPOL protocol version field (inclusive) to |
| * to Key Data (exclusive). */ |
| aad[0] = buf; |
| aad_len[0] = key_data - buf; |
| if (aes_siv_encrypt(ptk->kek, ptk->kek_len, |
| s_key_data, key_data_len, |
| 1, aad, aad_len, key_data) < 0) { |
| os_free(buf); |
| goto out; |
| } |
| |
| wpa_hexdump(MSG_DEBUG, "WPA: Encrypted Key Data from SIV", |
| key_data, AES_BLOCK_SIZE + key_data_len); |
| |
| os_free(msg); |
| msg = buf; |
| msg_len = buf_len; |
| #else /* CONFIG_FILS */ |
| goto out; |
| #endif /* CONFIG_FILS */ |
| } |
| |
| wpa_hexdump(MSG_MSGDUMP, "WPA: TX EAPOL-Key", msg, msg_len); |
| ret = wpa_sm_ether_send(sm, dest, proto, msg, msg_len); |
| eapol_sm_notify_tx_eapol_key(sm->eapol); |
| out: |
| os_free(msg); |
| return ret; |
| } |
| |
| |
| /** |
| * wpa_sm_key_request - Send EAPOL-Key Request |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @error: Indicate whether this is an Michael MIC error report |
| * @pairwise: 1 = error report for pairwise packet, 0 = for group packet |
| * |
| * Send an EAPOL-Key Request to the current authenticator. This function is |
| * used to request rekeying and it is usually called when a local Michael MIC |
| * failure is detected. |
| */ |
| void wpa_sm_key_request(struct wpa_sm *sm, int error, int pairwise) |
| { |
| size_t mic_len, hdrlen, rlen; |
| struct wpa_eapol_key *reply; |
| int key_info, ver; |
| u8 bssid[ETH_ALEN], *rbuf, *key_mic, *mic; |
| |
| if (pairwise && sm->wpa_deny_ptk0_rekey && !sm->use_ext_key_id && |
| wpa_sm_get_state(sm) == WPA_COMPLETED) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: PTK0 rekey not allowed, reconnecting"); |
| wpa_sm_reconnect(sm); |
| return; |
| } |
| |
| if (wpa_use_akm_defined(sm->key_mgmt)) |
| ver = WPA_KEY_INFO_TYPE_AKM_DEFINED; |
| else if (wpa_key_mgmt_ft(sm->key_mgmt) || |
| wpa_key_mgmt_sha256(sm->key_mgmt)) |
| ver = WPA_KEY_INFO_TYPE_AES_128_CMAC; |
| else if (sm->pairwise_cipher != WPA_CIPHER_TKIP) |
| ver = WPA_KEY_INFO_TYPE_HMAC_SHA1_AES; |
| else |
| ver = WPA_KEY_INFO_TYPE_HMAC_MD5_RC4; |
| |
| if (wpa_sm_get_bssid(sm, bssid) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "Failed to read BSSID for EAPOL-Key request"); |
| return; |
| } |
| |
| mic_len = wpa_mic_len(sm->key_mgmt, sm->pmk_len); |
| hdrlen = sizeof(*reply) + mic_len + 2; |
| rbuf = wpa_sm_alloc_eapol(sm, IEEE802_1X_TYPE_EAPOL_KEY, NULL, |
| hdrlen, &rlen, (void *) &reply); |
| if (rbuf == NULL) |
| return; |
| |
| reply->type = (sm->proto == WPA_PROTO_RSN || |
| sm->proto == WPA_PROTO_OSEN) ? |
| EAPOL_KEY_TYPE_RSN : EAPOL_KEY_TYPE_WPA; |
| key_info = WPA_KEY_INFO_REQUEST | ver; |
| if (sm->ptk_set) |
| key_info |= WPA_KEY_INFO_SECURE; |
| if (sm->ptk_set && mic_len) |
| key_info |= WPA_KEY_INFO_MIC; |
| if (error) |
| key_info |= WPA_KEY_INFO_ERROR; |
| if (pairwise) |
| key_info |= WPA_KEY_INFO_KEY_TYPE; |
| WPA_PUT_BE16(reply->key_info, key_info); |
| WPA_PUT_BE16(reply->key_length, 0); |
| os_memcpy(reply->replay_counter, sm->request_counter, |
| WPA_REPLAY_COUNTER_LEN); |
| inc_byte_array(sm->request_counter, WPA_REPLAY_COUNTER_LEN); |
| |
| mic = (u8 *) (reply + 1); |
| WPA_PUT_BE16(mic + mic_len, 0); |
| if (!(key_info & WPA_KEY_INFO_MIC)) |
| key_mic = NULL; |
| else |
| key_mic = mic; |
| |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Sending EAPOL-Key Request (error=%d " |
| "pairwise=%d ptk_set=%d len=%lu)", |
| error, pairwise, sm->ptk_set, (unsigned long) rlen); |
| wpa_eapol_key_send(sm, &sm->ptk, ver, bssid, ETH_P_EAPOL, rbuf, rlen, |
| key_mic); |
| } |
| |
| |
| static void wpa_supplicant_key_mgmt_set_pmk(struct wpa_sm *sm) |
| { |
| #ifdef CONFIG_IEEE80211R |
| if (sm->key_mgmt == WPA_KEY_MGMT_FT_IEEE8021X) { |
| if (wpa_sm_key_mgmt_set_pmk(sm, sm->xxkey, sm->xxkey_len)) |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Cannot set low order 256 bits of MSK for key management offload"); |
| } else { |
| #endif /* CONFIG_IEEE80211R */ |
| if (wpa_sm_key_mgmt_set_pmk(sm, sm->pmk, sm->pmk_len)) |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Cannot set PMK for key management offload"); |
| #ifdef CONFIG_IEEE80211R |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| } |
| |
| |
| static int wpa_supplicant_get_pmk(struct wpa_sm *sm, |
| const unsigned char *src_addr, |
| const u8 *pmkid) |
| { |
| int abort_cached = 0; |
| |
| if (pmkid && !sm->cur_pmksa) { |
| /* When using drivers that generate RSN IE, wpa_supplicant may |
| * not have enough time to get the association information |
| * event before receiving this 1/4 message, so try to find a |
| * matching PMKSA cache entry here. */ |
| sm->cur_pmksa = pmksa_cache_get(sm->pmksa, src_addr, pmkid, |
| NULL, 0); |
| if (sm->cur_pmksa) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: found matching PMKID from PMKSA cache"); |
| } else { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: no matching PMKID found"); |
| abort_cached = 1; |
| } |
| } |
| |
| if (pmkid && sm->cur_pmksa && |
| os_memcmp_const(pmkid, sm->cur_pmksa->pmkid, PMKID_LEN) == 0) { |
| wpa_hexdump(MSG_DEBUG, "RSN: matched PMKID", pmkid, PMKID_LEN); |
| wpa_sm_set_pmk_from_pmksa(sm); |
| wpa_hexdump_key(MSG_DEBUG, "RSN: PMK from PMKSA cache", |
| sm->pmk, sm->pmk_len); |
| eapol_sm_notify_cached(sm->eapol); |
| #ifdef CONFIG_IEEE80211R |
| sm->xxkey_len = 0; |
| #ifdef CONFIG_SAE |
| if (sm->key_mgmt == WPA_KEY_MGMT_FT_SAE && |
| sm->pmk_len == PMK_LEN) { |
| /* Need to allow FT key derivation to proceed with |
| * PMK from SAE being used as the XXKey in cases where |
| * the PMKID in msg 1/4 matches the PMKSA entry that was |
| * just added based on SAE authentication for the |
| * initial mobility domain association. */ |
| os_memcpy(sm->xxkey, sm->pmk, sm->pmk_len); |
| sm->xxkey_len = sm->pmk_len; |
| } |
| #endif /* CONFIG_SAE */ |
| #endif /* CONFIG_IEEE80211R */ |
| } else if (wpa_key_mgmt_wpa_ieee8021x(sm->key_mgmt) && sm->eapol) { |
| int res, pmk_len; |
| #ifdef CONFIG_IEEE80211R |
| u8 buf[2 * PMK_LEN]; |
| #endif /* CONFIG_IEEE80211R */ |
| |
| if (wpa_key_mgmt_sha384(sm->key_mgmt)) |
| pmk_len = PMK_LEN_SUITE_B_192; |
| else |
| pmk_len = PMK_LEN; |
| res = eapol_sm_get_key(sm->eapol, sm->pmk, pmk_len); |
| if (res) { |
| if (pmk_len == PMK_LEN) { |
| /* |
| * EAP-LEAP is an exception from other EAP |
| * methods: it uses only 16-byte PMK. |
| */ |
| res = eapol_sm_get_key(sm->eapol, sm->pmk, 16); |
| pmk_len = 16; |
| } |
| } |
| #ifdef CONFIG_IEEE80211R |
| if (res == 0 && |
| eapol_sm_get_key(sm->eapol, buf, 2 * PMK_LEN) == 0) { |
| if (wpa_key_mgmt_sha384(sm->key_mgmt)) { |
| os_memcpy(sm->xxkey, buf, SHA384_MAC_LEN); |
| sm->xxkey_len = SHA384_MAC_LEN; |
| } else { |
| os_memcpy(sm->xxkey, buf + PMK_LEN, PMK_LEN); |
| sm->xxkey_len = PMK_LEN; |
| } |
| forced_memzero(buf, sizeof(buf)); |
| if (sm->proto == WPA_PROTO_RSN && |
| wpa_key_mgmt_ft(sm->key_mgmt)) { |
| struct rsn_pmksa_cache_entry *sa = NULL; |
| const u8 *fils_cache_id = NULL; |
| |
| #ifdef CONFIG_FILS |
| if (sm->fils_cache_id_set) |
| fils_cache_id = sm->fils_cache_id; |
| #endif /* CONFIG_FILS */ |
| wpa_hexdump_key(MSG_DEBUG, |
| "FT: Cache XXKey/MPMK", |
| sm->xxkey, sm->xxkey_len); |
| sa = pmksa_cache_add(sm->pmksa, |
| sm->xxkey, sm->xxkey_len, |
| NULL, NULL, 0, |
| src_addr, sm->own_addr, |
| sm->network_ctx, |
| sm->key_mgmt, |
| fils_cache_id); |
| if (!sm->cur_pmksa) |
| sm->cur_pmksa = sa; |
| } |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| if (res == 0) { |
| struct rsn_pmksa_cache_entry *sa = NULL; |
| const u8 *fils_cache_id = NULL; |
| |
| #ifdef CONFIG_FILS |
| if (sm->fils_cache_id_set) |
| fils_cache_id = sm->fils_cache_id; |
| #endif /* CONFIG_FILS */ |
| |
| wpa_hexdump_key(MSG_DEBUG, "WPA: PMK from EAPOL state " |
| "machines", sm->pmk, pmk_len); |
| sm->pmk_len = pmk_len; |
| wpa_supplicant_key_mgmt_set_pmk(sm); |
| if (sm->proto == WPA_PROTO_RSN && |
| !wpa_key_mgmt_suite_b(sm->key_mgmt) && |
| !wpa_key_mgmt_ft(sm->key_mgmt)) { |
| sa = pmksa_cache_add(sm->pmksa, |
| sm->pmk, pmk_len, NULL, |
| NULL, 0, |
| src_addr, sm->own_addr, |
| sm->network_ctx, |
| sm->key_mgmt, |
| fils_cache_id); |
| } |
| if (!sm->cur_pmksa && pmkid && |
| pmksa_cache_get(sm->pmksa, src_addr, pmkid, NULL, |
| 0)) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: the new PMK matches with the " |
| "PMKID"); |
| abort_cached = 0; |
| } else if (sa && !sm->cur_pmksa && pmkid) { |
| /* |
| * It looks like the authentication server |
| * derived mismatching MSK. This should not |
| * really happen, but bugs happen.. There is not |
| * much we can do here without knowing what |
| * exactly caused the server to misbehave. |
| */ |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: PMKID mismatch - authentication server may have derived different MSK?!"); |
| return -1; |
| } |
| |
| if (!sm->cur_pmksa) |
| sm->cur_pmksa = sa; |
| #ifdef CONFIG_IEEE80211R |
| } else if (wpa_key_mgmt_ft(sm->key_mgmt) && sm->ft_protocol) { |
| wpa_printf(MSG_DEBUG, |
| "FT: Continue 4-way handshake without PMK/PMKID for association using FT protocol"); |
| #endif /* CONFIG_IEEE80211R */ |
| } else { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Failed to get master session key from " |
| "EAPOL state machines - key handshake " |
| "aborted"); |
| if (sm->cur_pmksa) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Cancelled PMKSA caching " |
| "attempt"); |
| sm->cur_pmksa = NULL; |
| abort_cached = 1; |
| } else if (!abort_cached) { |
| return -1; |
| } |
| } |
| } |
| |
| if (abort_cached && wpa_key_mgmt_wpa_ieee8021x(sm->key_mgmt) && |
| !wpa_key_mgmt_suite_b(sm->key_mgmt) && |
| !wpa_key_mgmt_ft(sm->key_mgmt) && sm->key_mgmt != WPA_KEY_MGMT_OSEN) |
| { |
| /* Send EAPOL-Start to trigger full EAP authentication. */ |
| u8 *buf; |
| size_t buflen; |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: no PMKSA entry found - trigger " |
| "full EAP authentication"); |
| buf = wpa_sm_alloc_eapol(sm, IEEE802_1X_TYPE_EAPOL_START, |
| NULL, 0, &buflen, NULL); |
| if (buf) { |
| /* Set and reset eapFail to allow EAP state machine to |
| * proceed with new authentication. */ |
| eapol_sm_notify_eap_fail(sm->eapol, true); |
| eapol_sm_notify_eap_fail(sm->eapol, false); |
| wpa_sm_ether_send(sm, sm->bssid, ETH_P_EAPOL, |
| buf, buflen); |
| os_free(buf); |
| return -2; |
| } |
| |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_supplicant_send_2_of_4 - Send message 2 of WPA/RSN 4-Way Handshake |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @dst: Destination address for the frame |
| * @key: Pointer to the EAPOL-Key frame header |
| * @ver: Version bits from EAPOL-Key Key Info |
| * @nonce: Nonce value for the EAPOL-Key frame |
| * @wpa_ie: WPA/RSN IE |
| * @wpa_ie_len: Length of the WPA/RSN IE |
| * @ptk: PTK to use for keyed hash and encryption |
| * Returns: >= 0 on success, < 0 on failure |
| */ |
| int wpa_supplicant_send_2_of_4(struct wpa_sm *sm, const unsigned char *dst, |
| const struct wpa_eapol_key *key, |
| int ver, const u8 *nonce, |
| const u8 *wpa_ie, size_t wpa_ie_len, |
| struct wpa_ptk *ptk) |
| { |
| size_t mic_len, hdrlen, rlen; |
| struct wpa_eapol_key *reply; |
| u8 *rbuf, *key_mic; |
| u8 *rsn_ie_buf = NULL; |
| u16 key_info; |
| |
| if (wpa_ie == NULL) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, "WPA: No wpa_ie set - " |
| "cannot generate msg 2/4"); |
| return -1; |
| } |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_key_mgmt_ft(sm->key_mgmt)) { |
| int res; |
| |
| wpa_hexdump(MSG_DEBUG, "WPA: WPA IE before FT processing", |
| wpa_ie, wpa_ie_len); |
| /* |
| * Add PMKR1Name into RSN IE (PMKID-List) and add MDIE and |
| * FTIE from (Re)Association Response. |
| */ |
| rsn_ie_buf = os_malloc(wpa_ie_len + 2 + 2 + PMKID_LEN + |
| sm->assoc_resp_ies_len); |
| if (rsn_ie_buf == NULL) |
| return -1; |
| os_memcpy(rsn_ie_buf, wpa_ie, wpa_ie_len); |
| res = wpa_insert_pmkid(rsn_ie_buf, &wpa_ie_len, |
| sm->pmk_r1_name); |
| if (res < 0) { |
| os_free(rsn_ie_buf); |
| return -1; |
| } |
| wpa_hexdump(MSG_DEBUG, |
| "WPA: WPA IE after PMKID[PMKR1Name] addition into RSNE", |
| rsn_ie_buf, wpa_ie_len); |
| |
| if (sm->assoc_resp_ies) { |
| wpa_hexdump(MSG_DEBUG, "WPA: Add assoc_resp_ies", |
| sm->assoc_resp_ies, |
| sm->assoc_resp_ies_len); |
| os_memcpy(rsn_ie_buf + wpa_ie_len, sm->assoc_resp_ies, |
| sm->assoc_resp_ies_len); |
| wpa_ie_len += sm->assoc_resp_ies_len; |
| } |
| |
| wpa_ie = rsn_ie_buf; |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| |
| wpa_hexdump(MSG_DEBUG, "WPA: WPA IE for msg 2/4", wpa_ie, wpa_ie_len); |
| |
| mic_len = wpa_mic_len(sm->key_mgmt, sm->pmk_len); |
| hdrlen = sizeof(*reply) + mic_len + 2; |
| rbuf = wpa_sm_alloc_eapol(sm, IEEE802_1X_TYPE_EAPOL_KEY, |
| NULL, hdrlen + wpa_ie_len, |
| &rlen, (void *) &reply); |
| if (rbuf == NULL) { |
| os_free(rsn_ie_buf); |
| return -1; |
| } |
| |
| reply->type = (sm->proto == WPA_PROTO_RSN || |
| sm->proto == WPA_PROTO_OSEN) ? |
| EAPOL_KEY_TYPE_RSN : EAPOL_KEY_TYPE_WPA; |
| key_info = ver | WPA_KEY_INFO_KEY_TYPE; |
| if (mic_len) |
| key_info |= WPA_KEY_INFO_MIC; |
| else |
| key_info |= WPA_KEY_INFO_ENCR_KEY_DATA; |
| WPA_PUT_BE16(reply->key_info, key_info); |
| if (sm->proto == WPA_PROTO_RSN || sm->proto == WPA_PROTO_OSEN) |
| WPA_PUT_BE16(reply->key_length, 0); |
| else |
| os_memcpy(reply->key_length, key->key_length, 2); |
| os_memcpy(reply->replay_counter, key->replay_counter, |
| WPA_REPLAY_COUNTER_LEN); |
| wpa_hexdump(MSG_DEBUG, "WPA: Replay Counter", reply->replay_counter, |
| WPA_REPLAY_COUNTER_LEN); |
| |
| key_mic = (u8 *) (reply + 1); |
| WPA_PUT_BE16(key_mic + mic_len, wpa_ie_len); /* Key Data Length */ |
| os_memcpy(key_mic + mic_len + 2, wpa_ie, wpa_ie_len); /* Key Data */ |
| os_free(rsn_ie_buf); |
| |
| os_memcpy(reply->key_nonce, nonce, WPA_NONCE_LEN); |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_INFO, "WPA: Sending EAPOL-Key 2/4"); |
| return wpa_eapol_key_send(sm, ptk, ver, dst, ETH_P_EAPOL, rbuf, rlen, |
| key_mic); |
| } |
| |
| |
| static int wpa_derive_ptk(struct wpa_sm *sm, const unsigned char *src_addr, |
| const struct wpa_eapol_key *key, struct wpa_ptk *ptk) |
| { |
| const u8 *z = NULL; |
| size_t z_len = 0, kdk_len; |
| int akmp; |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_key_mgmt_ft(sm->key_mgmt)) |
| return wpa_derive_ptk_ft(sm, src_addr, key, ptk); |
| #endif /* CONFIG_IEEE80211R */ |
| |
| #ifdef CONFIG_DPP2 |
| if (sm->key_mgmt == WPA_KEY_MGMT_DPP && sm->dpp_z) { |
| z = wpabuf_head(sm->dpp_z); |
| z_len = wpabuf_len(sm->dpp_z); |
| } |
| #endif /* CONFIG_DPP2 */ |
| |
| akmp = sm->key_mgmt; |
| #ifdef CONFIG_OWE |
| if (sm->owe_ptk_workaround && akmp == WPA_KEY_MGMT_OWE && |
| sm->pmk_len > 32) { |
| wpa_printf(MSG_DEBUG, |
| "OWE: Force SHA256 for PTK derivation"); |
| akmp |= WPA_KEY_MGMT_PSK_SHA256; |
| } |
| #endif /* CONFIG_OWE */ |
| |
| if (sm->force_kdk_derivation || |
| (sm->secure_ltf && |
| ieee802_11_rsnx_capab(sm->ap_rsnxe, WLAN_RSNX_CAPAB_SECURE_LTF))) |
| kdk_len = WPA_KDK_MAX_LEN; |
| else |
| kdk_len = 0; |
| |
| return wpa_pmk_to_ptk(sm->pmk, sm->pmk_len, "Pairwise key expansion", |
| sm->own_addr, sm->bssid, sm->snonce, |
| key->key_nonce, ptk, akmp, |
| sm->pairwise_cipher, z, z_len, |
| kdk_len); |
| } |
| |
| |
| static int wpa_handle_ext_key_id(struct wpa_sm *sm, |
| struct wpa_eapol_ie_parse *kde) |
| { |
| if (sm->ext_key_id) { |
| u16 key_id; |
| |
| if (!kde->key_id) { |
| wpa_msg(sm->ctx->msg_ctx, |
| sm->use_ext_key_id ? MSG_INFO : MSG_DEBUG, |
| "RSN: No Key ID in Extended Key ID handshake"); |
| sm->keyidx_active = 0; |
| return sm->use_ext_key_id ? -1 : 0; |
| } |
| |
| key_id = kde->key_id[0] & 0x03; |
| if (key_id > 1) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: Invalid Extended Key ID: %d", key_id); |
| return -1; |
| } |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Using Extended Key ID %d", key_id); |
| sm->keyidx_active = key_id; |
| sm->use_ext_key_id = 1; |
| } else { |
| if (kde->key_id && (kde->key_id[0] & 0x03)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: Non-zero Extended Key ID Key ID in PTK0 handshake"); |
| return -1; |
| } |
| |
| if (kde->key_id) { |
| /* This is not supposed to be included here, but ignore |
| * the case of matching Key ID 0 just in case. */ |
| wpa_msg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Extended Key ID Key ID 0 in PTK0 handshake"); |
| } |
| sm->keyidx_active = 0; |
| sm->use_ext_key_id = 0; |
| } |
| |
| return 0; |
| } |
| |
| |
| static void wpa_supplicant_process_1_of_4(struct wpa_sm *sm, |
| const unsigned char *src_addr, |
| const struct wpa_eapol_key *key, |
| u16 ver, const u8 *key_data, |
| size_t key_data_len) |
| { |
| struct wpa_eapol_ie_parse ie; |
| struct wpa_ptk *ptk; |
| int res; |
| u8 *kde, *kde_buf = NULL; |
| size_t kde_len; |
| |
| if (wpa_sm_get_network_ctx(sm) == NULL) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, "WPA: No SSID info " |
| "found (msg 1 of 4)"); |
| return; |
| } |
| |
| if (sm->wpa_deny_ptk0_rekey && !sm->use_ext_key_id && |
| wpa_sm_get_state(sm) == WPA_COMPLETED) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: PTK0 rekey not allowed, reconnecting"); |
| wpa_sm_reconnect(sm); |
| return; |
| } |
| |
| wpa_sm_set_state(sm, WPA_4WAY_HANDSHAKE); |
| wpa_dbg(sm->ctx->msg_ctx, MSG_INFO, "WPA: RX message 1 of 4-Way " |
| "Handshake from " MACSTR " (ver=%d)", MAC2STR(src_addr), ver); |
| |
| os_memset(&ie, 0, sizeof(ie)); |
| |
| if (sm->proto == WPA_PROTO_RSN || sm->proto == WPA_PROTO_OSEN) { |
| /* RSN: msg 1/4 should contain PMKID for the selected PMK */ |
| wpa_hexdump(MSG_DEBUG, "RSN: msg 1/4 key data", |
| key_data, key_data_len); |
| if (wpa_supplicant_parse_ies(key_data, key_data_len, &ie) < 0) |
| goto failed; |
| if (ie.pmkid) { |
| wpa_hexdump(MSG_DEBUG, "RSN: PMKID from " |
| "Authenticator", ie.pmkid, PMKID_LEN); |
| } |
| } |
| |
| res = wpa_supplicant_get_pmk(sm, src_addr, ie.pmkid); |
| if (res == -2) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "RSN: Do not reply to " |
| "msg 1/4 - requesting full EAP authentication"); |
| return; |
| } |
| if (res) |
| goto failed; |
| |
| if (sm->renew_snonce) { |
| if (random_get_bytes(sm->snonce, WPA_NONCE_LEN)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Failed to get random data for SNonce"); |
| goto failed; |
| } |
| sm->renew_snonce = 0; |
| wpa_hexdump(MSG_DEBUG, "WPA: Renewed SNonce", |
| sm->snonce, WPA_NONCE_LEN); |
| } |
| |
| /* Calculate PTK which will be stored as a temporary PTK until it has |
| * been verified when processing message 3/4. */ |
| ptk = &sm->tptk; |
| if (wpa_derive_ptk(sm, src_addr, key, ptk) < 0) |
| goto failed; |
| if (sm->pairwise_cipher == WPA_CIPHER_TKIP) { |
| u8 buf[8]; |
| /* Supplicant: swap tx/rx Mic keys */ |
| os_memcpy(buf, &ptk->tk[16], 8); |
| os_memcpy(&ptk->tk[16], &ptk->tk[24], 8); |
| os_memcpy(&ptk->tk[24], buf, 8); |
| forced_memzero(buf, sizeof(buf)); |
| } |
| sm->tptk_set = 1; |
| |
| kde = sm->assoc_wpa_ie; |
| kde_len = sm->assoc_wpa_ie_len; |
| kde_buf = os_malloc(kde_len + |
| 2 + RSN_SELECTOR_LEN + 3 + |
| sm->assoc_rsnxe_len + |
| 2 + RSN_SELECTOR_LEN + 1 + |
| 2 + RSN_SELECTOR_LEN + 2); |
| if (!kde_buf) |
| goto failed; |
| os_memcpy(kde_buf, kde, kde_len); |
| kde = kde_buf; |
| |
| #ifdef CONFIG_OCV |
| if (wpa_sm_ocv_enabled(sm)) { |
| struct wpa_channel_info ci; |
| u8 *pos; |
| |
| pos = kde + kde_len; |
| if (wpa_sm_channel_info(sm, &ci) != 0) { |
| wpa_printf(MSG_WARNING, |
| "Failed to get channel info for OCI element in EAPOL-Key 2/4"); |
| goto failed; |
| } |
| #ifdef CONFIG_TESTING_OPTIONS |
| if (sm->oci_freq_override_eapol) { |
| wpa_printf(MSG_INFO, |
| "TEST: Override OCI KDE frequency %d -> %d MHz", |
| ci.frequency, sm->oci_freq_override_eapol); |
| ci.frequency = sm->oci_freq_override_eapol; |
| } |
| #endif /* CONFIG_TESTING_OPTIONS */ |
| |
| if (ocv_insert_oci_kde(&ci, &pos) < 0) |
| goto failed; |
| kde_len = pos - kde; |
| } |
| #endif /* CONFIG_OCV */ |
| |
| if (sm->assoc_rsnxe && sm->assoc_rsnxe_len) { |
| os_memcpy(kde + kde_len, sm->assoc_rsnxe, sm->assoc_rsnxe_len); |
| kde_len += sm->assoc_rsnxe_len; |
| } |
| |
| #ifdef CONFIG_P2P |
| if (sm->p2p) { |
| u8 *pos; |
| |
| wpa_printf(MSG_DEBUG, |
| "P2P: Add IP Address Request KDE into EAPOL-Key 2/4"); |
| pos = kde + kde_len; |
| *pos++ = WLAN_EID_VENDOR_SPECIFIC; |
| *pos++ = RSN_SELECTOR_LEN + 1; |
| RSN_SELECTOR_PUT(pos, WFA_KEY_DATA_IP_ADDR_REQ); |
| pos += RSN_SELECTOR_LEN; |
| *pos++ = 0x01; |
| kde_len = pos - kde; |
| } |
| #endif /* CONFIG_P2P */ |
| |
| #ifdef CONFIG_DPP2 |
| if (DPP_VERSION > 1 && sm->key_mgmt == WPA_KEY_MGMT_DPP) { |
| u8 *pos; |
| |
| wpa_printf(MSG_DEBUG, "DPP: Add DPP KDE into EAPOL-Key 2/4"); |
| pos = kde + kde_len; |
| *pos++ = WLAN_EID_VENDOR_SPECIFIC; |
| *pos++ = RSN_SELECTOR_LEN + 2; |
| RSN_SELECTOR_PUT(pos, WFA_KEY_DATA_DPP); |
| pos += RSN_SELECTOR_LEN; |
| *pos++ = DPP_VERSION; /* Protocol Version */ |
| *pos = 0; /* Flags */ |
| if (sm->dpp_pfs == 0) |
| *pos |= DPP_KDE_PFS_ALLOWED; |
| else if (sm->dpp_pfs == 1) |
| *pos |= DPP_KDE_PFS_ALLOWED | DPP_KDE_PFS_REQUIRED; |
| pos++; |
| kde_len = pos - kde; |
| } |
| #endif /* CONFIG_DPP2 */ |
| |
| if (wpa_supplicant_send_2_of_4(sm, sm->bssid, key, ver, sm->snonce, |
| kde, kde_len, ptk) < 0) |
| goto failed; |
| |
| os_free(kde_buf); |
| os_memcpy(sm->anonce, key->key_nonce, WPA_NONCE_LEN); |
| return; |
| |
| failed: |
| os_free(kde_buf); |
| wpa_sm_deauthenticate(sm, WLAN_REASON_UNSPECIFIED); |
| } |
| |
| |
| static void wpa_sm_start_preauth(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct wpa_sm *sm = eloop_ctx; |
| rsn_preauth_candidate_process(sm); |
| } |
| |
| |
| static void wpa_supplicant_key_neg_complete(struct wpa_sm *sm, |
| const u8 *addr, int secure) |
| { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Key negotiation completed with " |
| MACSTR " [PTK=%s GTK=%s]", MAC2STR(addr), |
| wpa_cipher_txt(sm->pairwise_cipher), |
| wpa_cipher_txt(sm->group_cipher)); |
| wpa_sm_cancel_auth_timeout(sm); |
| wpa_sm_set_state(sm, WPA_COMPLETED); |
| |
| if (secure) { |
| wpa_sm_mlme_setprotection( |
| sm, addr, MLME_SETPROTECTION_PROTECT_TYPE_RX_TX, |
| MLME_SETPROTECTION_KEY_TYPE_PAIRWISE); |
| eapol_sm_notify_portValid(sm->eapol, true); |
| if (wpa_key_mgmt_wpa_psk(sm->key_mgmt) || |
| sm->key_mgmt == WPA_KEY_MGMT_DPP || |
| sm->key_mgmt == WPA_KEY_MGMT_OWE) |
| eapol_sm_notify_eap_success(sm->eapol, true); |
| /* |
| * Start preauthentication after a short wait to avoid a |
| * possible race condition between the data receive and key |
| * configuration after the 4-Way Handshake. This increases the |
| * likelihood of the first preauth EAPOL-Start frame getting to |
| * the target AP. |
| */ |
| if (!dl_list_empty(&sm->pmksa_candidates)) |
| eloop_register_timeout(1, 0, wpa_sm_start_preauth, |
| sm, NULL); |
| } |
| |
| if (sm->cur_pmksa && sm->cur_pmksa->opportunistic) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Authenticator accepted " |
| "opportunistic PMKSA entry - marking it valid"); |
| sm->cur_pmksa->opportunistic = 0; |
| } |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_key_mgmt_ft(sm->key_mgmt)) { |
| /* Prepare for the next transition */ |
| wpa_ft_prepare_auth_request(sm, NULL); |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| } |
| |
| |
| static void wpa_sm_rekey_ptk(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct wpa_sm *sm = eloop_ctx; |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: Request PTK rekeying"); |
| wpa_sm_key_request(sm, 0, 1); |
| } |
| |
| |
| static int wpa_supplicant_install_ptk(struct wpa_sm *sm, |
| const struct wpa_eapol_key *key, |
| enum key_flag key_flag) |
| { |
| int keylen, rsclen; |
| enum wpa_alg alg; |
| const u8 *key_rsc; |
| |
| if (sm->ptk.installed) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Do not re-install same PTK to the driver"); |
| return 0; |
| } |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Installing PTK to the driver"); |
| |
| if (sm->pairwise_cipher == WPA_CIPHER_NONE) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: Pairwise Cipher " |
| "Suite: NONE - do not use pairwise keys"); |
| return 0; |
| } |
| |
| if (!wpa_cipher_valid_pairwise(sm->pairwise_cipher)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Unsupported pairwise cipher %d", |
| sm->pairwise_cipher); |
| return -1; |
| } |
| |
| alg = wpa_cipher_to_alg(sm->pairwise_cipher); |
| keylen = wpa_cipher_key_len(sm->pairwise_cipher); |
| if (keylen <= 0 || (unsigned int) keylen != sm->ptk.tk_len) { |
| wpa_printf(MSG_DEBUG, "WPA: TK length mismatch: %d != %lu", |
| keylen, (long unsigned int) sm->ptk.tk_len); |
| return -1; |
| } |
| rsclen = wpa_cipher_rsc_len(sm->pairwise_cipher); |
| |
| if (sm->proto == WPA_PROTO_RSN || sm->proto == WPA_PROTO_OSEN) { |
| key_rsc = null_rsc; |
| } else { |
| key_rsc = key->key_rsc; |
| wpa_hexdump(MSG_DEBUG, "WPA: RSC", key_rsc, rsclen); |
| } |
| |
| if (wpa_sm_set_key(sm, alg, sm->bssid, sm->keyidx_active, 1, key_rsc, |
| rsclen, sm->ptk.tk, keylen, |
| KEY_FLAG_PAIRWISE | key_flag) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Failed to set PTK to the driver (alg=%d keylen=%d bssid=" |
| MACSTR " idx=%d key_flag=0x%x)", |
| alg, keylen, MAC2STR(sm->bssid), |
| sm->keyidx_active, key_flag); |
| return -1; |
| } |
| |
| wpa_sm_store_ptk(sm, sm->bssid, sm->pairwise_cipher, |
| sm->dot11RSNAConfigPMKLifetime, &sm->ptk); |
| |
| /* TK is not needed anymore in supplicant */ |
| os_memset(sm->ptk.tk, 0, WPA_TK_MAX_LEN); |
| sm->ptk.tk_len = 0; |
| sm->ptk.installed = 1; |
| |
| if (sm->wpa_ptk_rekey) { |
| eloop_cancel_timeout(wpa_sm_rekey_ptk, sm, NULL); |
| eloop_register_timeout(sm->wpa_ptk_rekey, 0, wpa_sm_rekey_ptk, |
| sm, NULL); |
| } |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_activate_ptk(struct wpa_sm *sm) |
| { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Activate PTK (idx=%d bssid=" MACSTR ")", |
| sm->keyidx_active, MAC2STR(sm->bssid)); |
| |
| if (wpa_sm_set_key(sm, 0, sm->bssid, sm->keyidx_active, 0, NULL, 0, |
| NULL, 0, KEY_FLAG_PAIRWISE_RX_TX_MODIFY) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Failed to activate PTK for TX (idx=%d bssid=" |
| MACSTR ")", sm->keyidx_active, MAC2STR(sm->bssid)); |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_check_group_cipher(struct wpa_sm *sm, |
| int group_cipher, |
| int keylen, int maxkeylen, |
| int *key_rsc_len, |
| enum wpa_alg *alg) |
| { |
| int klen; |
| |
| *alg = wpa_cipher_to_alg(group_cipher); |
| if (*alg == WPA_ALG_NONE) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Unsupported Group Cipher %d", |
| group_cipher); |
| return -1; |
| } |
| *key_rsc_len = wpa_cipher_rsc_len(group_cipher); |
| |
| klen = wpa_cipher_key_len(group_cipher); |
| if (keylen != klen || maxkeylen < klen) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Unsupported %s Group Cipher key length %d (%d)", |
| wpa_cipher_txt(group_cipher), keylen, maxkeylen); |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| struct wpa_gtk_data { |
| enum wpa_alg alg; |
| int tx, key_rsc_len, keyidx; |
| u8 gtk[32]; |
| int gtk_len; |
| }; |
| |
| |
| static int wpa_supplicant_install_gtk(struct wpa_sm *sm, |
| const struct wpa_gtk_data *gd, |
| const u8 *key_rsc, int wnm_sleep) |
| { |
| const u8 *_gtk = gd->gtk; |
| u8 gtk_buf[32]; |
| |
| /* Detect possible key reinstallation */ |
| if ((sm->gtk.gtk_len == (size_t) gd->gtk_len && |
| os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) || |
| (sm->gtk_wnm_sleep.gtk_len == (size_t) gd->gtk_len && |
| os_memcmp(sm->gtk_wnm_sleep.gtk, gd->gtk, |
| sm->gtk_wnm_sleep.gtk_len) == 0)) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Not reinstalling already in-use GTK to the driver (keyidx=%d tx=%d len=%d)", |
| gd->keyidx, gd->tx, gd->gtk_len); |
| return 0; |
| } |
| |
| wpa_hexdump_key(MSG_DEBUG, "WPA: Group Key", gd->gtk, gd->gtk_len); |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Installing GTK to the driver (keyidx=%d tx=%d len=%d)", |
| gd->keyidx, gd->tx, gd->gtk_len); |
| wpa_hexdump(MSG_DEBUG, "WPA: RSC", key_rsc, gd->key_rsc_len); |
| if (sm->group_cipher == WPA_CIPHER_TKIP) { |
| /* Swap Tx/Rx keys for Michael MIC */ |
| os_memcpy(gtk_buf, gd->gtk, 16); |
| os_memcpy(gtk_buf + 16, gd->gtk + 24, 8); |
| os_memcpy(gtk_buf + 24, gd->gtk + 16, 8); |
| _gtk = gtk_buf; |
| } |
| if (sm->pairwise_cipher == WPA_CIPHER_NONE) { |
| if (wpa_sm_set_key(sm, gd->alg, NULL, |
| gd->keyidx, 1, key_rsc, gd->key_rsc_len, |
| _gtk, gd->gtk_len, |
| KEY_FLAG_GROUP_RX_TX_DEFAULT) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Failed to set GTK to the driver " |
| "(Group only)"); |
| forced_memzero(gtk_buf, sizeof(gtk_buf)); |
| return -1; |
| } |
| } else if (wpa_sm_set_key(sm, gd->alg, broadcast_ether_addr, |
| gd->keyidx, gd->tx, key_rsc, gd->key_rsc_len, |
| _gtk, gd->gtk_len, KEY_FLAG_GROUP_RX) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Failed to set GTK to " |
| "the driver (alg=%d keylen=%d keyidx=%d)", |
| gd->alg, gd->gtk_len, gd->keyidx); |
| forced_memzero(gtk_buf, sizeof(gtk_buf)); |
| return -1; |
| } |
| forced_memzero(gtk_buf, sizeof(gtk_buf)); |
| |
| if (wnm_sleep) { |
| sm->gtk_wnm_sleep.gtk_len = gd->gtk_len; |
| os_memcpy(sm->gtk_wnm_sleep.gtk, gd->gtk, |
| sm->gtk_wnm_sleep.gtk_len); |
| } else { |
| sm->gtk.gtk_len = gd->gtk_len; |
| os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_gtk_tx_bit_workaround(const struct wpa_sm *sm, |
| int tx) |
| { |
| if (tx && sm->pairwise_cipher != WPA_CIPHER_NONE) { |
| /* Ignore Tx bit for GTK if a pairwise key is used. One AP |
| * seemed to set this bit (incorrectly, since Tx is only when |
| * doing Group Key only APs) and without this workaround, the |
| * data connection does not work because wpa_supplicant |
| * configured non-zero keyidx to be used for unicast. */ |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Tx bit set for GTK, but pairwise " |
| "keys are used - ignore Tx bit"); |
| return 0; |
| } |
| return tx; |
| } |
| |
| |
| static int wpa_supplicant_rsc_relaxation(const struct wpa_sm *sm, |
| const u8 *rsc) |
| { |
| int rsclen; |
| |
| if (!sm->wpa_rsc_relaxation) |
| return 0; |
| |
| rsclen = wpa_cipher_rsc_len(sm->group_cipher); |
| |
| /* |
| * Try to detect RSC (endian) corruption issue where the AP sends |
| * the RSC bytes in EAPOL-Key message in the wrong order, both if |
| * it's actually a 6-byte field (as it should be) and if it treats |
| * it as an 8-byte field. |
| * An AP model known to have this bug is the Sapido RB-1632. |
| */ |
| if (rsclen == 6 && ((rsc[5] && !rsc[0]) || rsc[6] || rsc[7])) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "RSC %02x%02x%02x%02x%02x%02x%02x%02x is likely bogus, using 0", |
| rsc[0], rsc[1], rsc[2], rsc[3], |
| rsc[4], rsc[5], rsc[6], rsc[7]); |
| |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm, |
| const struct wpa_eapol_key *key, |
| const u8 *gtk, size_t gtk_len, |
| int key_info) |
| { |
| struct wpa_gtk_data gd; |
| const u8 *key_rsc; |
| |
| /* |
| * IEEE Std 802.11i-2004 - 8.5.2 EAPOL-Key frames - Figure 43x |
| * GTK KDE format: |
| * KeyID[bits 0-1], Tx [bit 2], Reserved [bits 3-7] |
| * Reserved [bits 0-7] |
| * GTK |
| */ |
| |
| os_memset(&gd, 0, sizeof(gd)); |
| wpa_hexdump_key(MSG_DEBUG, "RSN: received GTK in pairwise handshake", |
| gtk, gtk_len); |
| |
| if (gtk_len < 2 || gtk_len - 2 > sizeof(gd.gtk)) |
| return -1; |
| |
| gd.keyidx = gtk[0] & 0x3; |
| gd.tx = wpa_supplicant_gtk_tx_bit_workaround(sm, |
| !!(gtk[0] & BIT(2))); |
| gtk += 2; |
| gtk_len -= 2; |
| |
| os_memcpy(gd.gtk, gtk, gtk_len); |
| gd.gtk_len = gtk_len; |
| |
| key_rsc = key->key_rsc; |
| if (wpa_supplicant_rsc_relaxation(sm, key->key_rsc)) |
| key_rsc = null_rsc; |
| |
| if (sm->group_cipher != WPA_CIPHER_GTK_NOT_USED && |
| (wpa_supplicant_check_group_cipher(sm, sm->group_cipher, |
| gtk_len, gtk_len, |
| &gd.key_rsc_len, &gd.alg) || |
| wpa_supplicant_install_gtk(sm, &gd, key_rsc, 0))) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Failed to install GTK"); |
| forced_memzero(&gd, sizeof(gd)); |
| return -1; |
| } |
| forced_memzero(&gd, sizeof(gd)); |
| |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_install_igtk(struct wpa_sm *sm, |
| const struct wpa_igtk_kde *igtk, |
| int wnm_sleep) |
| { |
| size_t len = wpa_cipher_key_len(sm->mgmt_group_cipher); |
| u16 keyidx = WPA_GET_LE16(igtk->keyid); |
| |
| /* Detect possible key reinstallation */ |
| if ((sm->igtk.igtk_len == len && |
| os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) || |
| (sm->igtk_wnm_sleep.igtk_len == len && |
| os_memcmp(sm->igtk_wnm_sleep.igtk, igtk->igtk, |
| sm->igtk_wnm_sleep.igtk_len) == 0)) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Not reinstalling already in-use IGTK to the driver (keyidx=%d)", |
| keyidx); |
| return 0; |
| } |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: IGTK keyid %d pn " COMPACT_MACSTR, |
| keyidx, MAC2STR(igtk->pn)); |
| wpa_hexdump_key(MSG_DEBUG, "WPA: IGTK", igtk->igtk, len); |
| if (keyidx > 4095) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Invalid IGTK KeyID %d", keyidx); |
| return -1; |
| } |
| if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher), |
| broadcast_ether_addr, |
| keyidx, 0, igtk->pn, sizeof(igtk->pn), |
| igtk->igtk, len, KEY_FLAG_GROUP_RX) < 0) { |
| if (keyidx == 0x0400 || keyidx == 0x0500) { |
| /* Assume the AP has broken PMF implementation since it |
| * seems to have swapped the KeyID bytes. The AP cannot |
| * be trusted to implement BIP correctly or provide a |
| * valid IGTK, so do not try to configure this key with |
| * swapped KeyID bytes. Instead, continue without |
| * configuring the IGTK so that the driver can drop any |
| * received group-addressed robust management frames due |
| * to missing keys. |
| * |
| * Normally, this error behavior would result in us |
| * disconnecting, but there are number of deployed APs |
| * with this broken behavior, so as an interoperability |
| * workaround, allow the connection to proceed. */ |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Ignore IGTK configuration error due to invalid IGTK KeyID byte order"); |
| } else { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Failed to configure IGTK to the driver"); |
| return -1; |
| } |
| } |
| |
| if (wnm_sleep) { |
| sm->igtk_wnm_sleep.igtk_len = len; |
| os_memcpy(sm->igtk_wnm_sleep.igtk, igtk->igtk, |
| sm->igtk_wnm_sleep.igtk_len); |
| } else { |
| sm->igtk.igtk_len = len; |
| os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_install_bigtk(struct wpa_sm *sm, |
| const struct wpa_bigtk_kde *bigtk, |
| int wnm_sleep) |
| { |
| size_t len = wpa_cipher_key_len(sm->mgmt_group_cipher); |
| u16 keyidx = WPA_GET_LE16(bigtk->keyid); |
| |
| /* Detect possible key reinstallation */ |
| if ((sm->bigtk.bigtk_len == len && |
| os_memcmp(sm->bigtk.bigtk, bigtk->bigtk, |
| sm->bigtk.bigtk_len) == 0) || |
| (sm->bigtk_wnm_sleep.bigtk_len == len && |
| os_memcmp(sm->bigtk_wnm_sleep.bigtk, bigtk->bigtk, |
| sm->bigtk_wnm_sleep.bigtk_len) == 0)) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Not reinstalling already in-use BIGTK to the driver (keyidx=%d)", |
| keyidx); |
| return 0; |
| } |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: BIGTK keyid %d pn " COMPACT_MACSTR, |
| keyidx, MAC2STR(bigtk->pn)); |
| wpa_hexdump_key(MSG_DEBUG, "WPA: BIGTK", bigtk->bigtk, len); |
| if (keyidx < 6 || keyidx > 7) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Invalid BIGTK KeyID %d", keyidx); |
| return -1; |
| } |
| if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher), |
| broadcast_ether_addr, |
| keyidx, 0, bigtk->pn, sizeof(bigtk->pn), |
| bigtk->bigtk, len, KEY_FLAG_GROUP_RX) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Failed to configure BIGTK to the driver"); |
| return -1; |
| } |
| |
| if (wnm_sleep) { |
| sm->bigtk_wnm_sleep.bigtk_len = len; |
| os_memcpy(sm->bigtk_wnm_sleep.bigtk, bigtk->bigtk, |
| sm->bigtk_wnm_sleep.bigtk_len); |
| } else { |
| sm->bigtk.bigtk_len = len; |
| os_memcpy(sm->bigtk.bigtk, bigtk->bigtk, sm->bigtk.bigtk_len); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int ieee80211w_set_keys(struct wpa_sm *sm, |
| struct wpa_eapol_ie_parse *ie) |
| { |
| size_t len; |
| |
| if (!wpa_cipher_valid_mgmt_group(sm->mgmt_group_cipher) || |
| sm->mgmt_group_cipher == WPA_CIPHER_GTK_NOT_USED) |
| return 0; |
| |
| if (ie->igtk) { |
| const struct wpa_igtk_kde *igtk; |
| |
| len = wpa_cipher_key_len(sm->mgmt_group_cipher); |
| if (ie->igtk_len != WPA_IGTK_KDE_PREFIX_LEN + len) |
| return -1; |
| |
| igtk = (const struct wpa_igtk_kde *) ie->igtk; |
| if (wpa_supplicant_install_igtk(sm, igtk, 0) < 0) |
| return -1; |
| } |
| |
| if (ie->bigtk && sm->beacon_prot) { |
| const struct wpa_bigtk_kde *bigtk; |
| |
| len = wpa_cipher_key_len(sm->mgmt_group_cipher); |
| if (ie->bigtk_len != WPA_BIGTK_KDE_PREFIX_LEN + len) |
| return -1; |
| |
| bigtk = (const struct wpa_bigtk_kde *) ie->bigtk; |
| if (wpa_supplicant_install_bigtk(sm, bigtk, 0) < 0) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static void wpa_report_ie_mismatch(struct wpa_sm *sm, |
| const char *reason, const u8 *src_addr, |
| const u8 *wpa_ie, size_t wpa_ie_len, |
| const u8 *rsn_ie, size_t rsn_ie_len) |
| { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, "WPA: %s (src=" MACSTR ")", |
| reason, MAC2STR(src_addr)); |
| |
| if (sm->ap_wpa_ie) { |
| wpa_hexdump(MSG_INFO, "WPA: WPA IE in Beacon/ProbeResp", |
| sm->ap_wpa_ie, sm->ap_wpa_ie_len); |
| } |
| if (wpa_ie) { |
| if (!sm->ap_wpa_ie) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: No WPA IE in Beacon/ProbeResp"); |
| } |
| wpa_hexdump(MSG_INFO, "WPA: WPA IE in 3/4 msg", |
| wpa_ie, wpa_ie_len); |
| } |
| |
| if (sm->ap_rsn_ie) { |
| wpa_hexdump(MSG_INFO, "WPA: RSN IE in Beacon/ProbeResp", |
| sm->ap_rsn_ie, sm->ap_rsn_ie_len); |
| } |
| if (rsn_ie) { |
| if (!sm->ap_rsn_ie) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: No RSN IE in Beacon/ProbeResp"); |
| } |
| wpa_hexdump(MSG_INFO, "WPA: RSN IE in 3/4 msg", |
| rsn_ie, rsn_ie_len); |
| } |
| |
| wpa_sm_deauthenticate(sm, WLAN_REASON_IE_IN_4WAY_DIFFERS); |
| } |
| |
| |
| #ifdef CONFIG_IEEE80211R |
| |
| static int ft_validate_mdie(struct wpa_sm *sm, |
| const unsigned char *src_addr, |
| struct wpa_eapol_ie_parse *ie, |
| const u8 *assoc_resp_mdie) |
| { |
| struct rsn_mdie *mdie; |
| |
| mdie = (struct rsn_mdie *) (ie->mdie + 2); |
| if (ie->mdie == NULL || ie->mdie_len < 2 + sizeof(*mdie) || |
| os_memcmp(mdie->mobility_domain, sm->mobility_domain, |
| MOBILITY_DOMAIN_ID_LEN) != 0) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "FT: MDIE in msg 3/4 did " |
| "not match with the current mobility domain"); |
| return -1; |
| } |
| |
| if (assoc_resp_mdie && |
| (assoc_resp_mdie[1] != ie->mdie[1] || |
| os_memcmp(assoc_resp_mdie, ie->mdie, 2 + ie->mdie[1]) != 0)) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "FT: MDIE mismatch"); |
| wpa_hexdump(MSG_DEBUG, "FT: MDIE in EAPOL-Key msg 3/4", |
| ie->mdie, 2 + ie->mdie[1]); |
| wpa_hexdump(MSG_DEBUG, "FT: MDIE in (Re)Association Response", |
| assoc_resp_mdie, 2 + assoc_resp_mdie[1]); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int ft_validate_ftie(struct wpa_sm *sm, |
| const unsigned char *src_addr, |
| struct wpa_eapol_ie_parse *ie, |
| const u8 *assoc_resp_ftie) |
| { |
| if (ie->ftie == NULL) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "FT: No FTIE in EAPOL-Key msg 3/4"); |
| return -1; |
| } |
| |
| if (assoc_resp_ftie == NULL) |
| return 0; |
| |
| if (assoc_resp_ftie[1] != ie->ftie[1] || |
| os_memcmp(assoc_resp_ftie, ie->ftie, 2 + ie->ftie[1]) != 0) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "FT: FTIE mismatch"); |
| wpa_hexdump(MSG_DEBUG, "FT: FTIE in EAPOL-Key msg 3/4", |
| ie->ftie, 2 + ie->ftie[1]); |
| wpa_hexdump(MSG_DEBUG, "FT: FTIE in (Re)Association Response", |
| assoc_resp_ftie, 2 + assoc_resp_ftie[1]); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int ft_validate_rsnie(struct wpa_sm *sm, |
| const unsigned char *src_addr, |
| struct wpa_eapol_ie_parse *ie) |
| { |
| struct wpa_ie_data rsn; |
| |
| if (!ie->rsn_ie) |
| return 0; |
| |
| /* |
| * Verify that PMKR1Name from EAPOL-Key message 3/4 |
| * matches with the value we derived. |
| */ |
| if (wpa_parse_wpa_ie_rsn(ie->rsn_ie, ie->rsn_ie_len, &rsn) < 0 || |
| rsn.num_pmkid != 1 || rsn.pmkid == NULL) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "FT: No PMKR1Name in " |
| "FT 4-way handshake message 3/4"); |
| return -1; |
| } |
| |
| if (os_memcmp_const(rsn.pmkid, sm->pmk_r1_name, WPA_PMK_NAME_LEN) != 0) |
| { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "FT: PMKR1Name mismatch in " |
| "FT 4-way handshake message 3/4"); |
| wpa_hexdump(MSG_DEBUG, "FT: PMKR1Name from Authenticator", |
| rsn.pmkid, WPA_PMK_NAME_LEN); |
| wpa_hexdump(MSG_DEBUG, "FT: Derived PMKR1Name", |
| sm->pmk_r1_name, WPA_PMK_NAME_LEN); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_validate_ie_ft(struct wpa_sm *sm, |
| const unsigned char *src_addr, |
| struct wpa_eapol_ie_parse *ie) |
| { |
| const u8 *pos, *end, *mdie = NULL, *ftie = NULL; |
| |
| if (sm->assoc_resp_ies) { |
| pos = sm->assoc_resp_ies; |
| end = pos + sm->assoc_resp_ies_len; |
| while (end - pos > 2) { |
| if (2 + pos[1] > end - pos) |
| break; |
| switch (*pos) { |
| case WLAN_EID_MOBILITY_DOMAIN: |
| mdie = pos; |
| break; |
| case WLAN_EID_FAST_BSS_TRANSITION: |
| ftie = pos; |
| break; |
| } |
| pos += 2 + pos[1]; |
| } |
| } |
| |
| if (ft_validate_mdie(sm, src_addr, ie, mdie) < 0 || |
| ft_validate_ftie(sm, src_addr, ie, ftie) < 0 || |
| ft_validate_rsnie(sm, src_addr, ie) < 0) |
| return -1; |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_IEEE80211R */ |
| |
| |
| static int wpa_supplicant_validate_ie(struct wpa_sm *sm, |
| const unsigned char *src_addr, |
| struct wpa_eapol_ie_parse *ie) |
| { |
| if (sm->ap_wpa_ie == NULL && sm->ap_rsn_ie == NULL) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: No WPA/RSN IE for this AP known. " |
| "Trying to get from scan results"); |
| if (wpa_sm_get_beacon_ie(sm) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Could not find AP from " |
| "the scan results"); |
| return -1; |
| } |
| wpa_msg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Found the current AP from updated scan results"); |
| } |
| |
| if (ie->wpa_ie == NULL && ie->rsn_ie == NULL && |
| (sm->ap_wpa_ie || sm->ap_rsn_ie)) { |
| wpa_report_ie_mismatch(sm, "IE in 3/4 msg does not match " |
| "with IE in Beacon/ProbeResp (no IE?)", |
| src_addr, ie->wpa_ie, ie->wpa_ie_len, |
| ie->rsn_ie, ie->rsn_ie_len); |
| return -1; |
| } |
| |
| if ((ie->wpa_ie && sm->ap_wpa_ie && |
| (ie->wpa_ie_len != sm->ap_wpa_ie_len || |
| os_memcmp(ie->wpa_ie, sm->ap_wpa_ie, ie->wpa_ie_len) != 0)) || |
| (ie->rsn_ie && sm->ap_rsn_ie && |
| wpa_compare_rsn_ie(wpa_key_mgmt_ft(sm->key_mgmt), |
| sm->ap_rsn_ie, sm->ap_rsn_ie_len, |
| ie->rsn_ie, ie->rsn_ie_len))) { |
| wpa_report_ie_mismatch(sm, "IE in 3/4 msg does not match " |
| "with IE in Beacon/ProbeResp", |
| src_addr, ie->wpa_ie, ie->wpa_ie_len, |
| ie->rsn_ie, ie->rsn_ie_len); |
| return -1; |
| } |
| |
| if (sm->proto == WPA_PROTO_WPA && |
| ie->rsn_ie && sm->ap_rsn_ie == NULL && sm->rsn_enabled) { |
| wpa_report_ie_mismatch(sm, "Possible downgrade attack " |
| "detected - RSN was enabled and RSN IE " |
| "was in msg 3/4, but not in " |
| "Beacon/ProbeResp", |
| src_addr, ie->wpa_ie, ie->wpa_ie_len, |
| ie->rsn_ie, ie->rsn_ie_len); |
| return -1; |
| } |
| |
| if (sm->proto == WPA_PROTO_RSN && |
| ((sm->ap_rsnxe && !ie->rsnxe) || |
| (!sm->ap_rsnxe && ie->rsnxe) || |
| (sm->ap_rsnxe && ie->rsnxe && |
| (sm->ap_rsnxe_len != ie->rsnxe_len || |
| os_memcmp(sm->ap_rsnxe, ie->rsnxe, sm->ap_rsnxe_len) != 0)))) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: RSNXE mismatch between Beacon/ProbeResp and EAPOL-Key msg 3/4"); |
| wpa_hexdump(MSG_INFO, "RSNXE in Beacon/ProbeResp", |
| sm->ap_rsnxe, sm->ap_rsnxe_len); |
| wpa_hexdump(MSG_INFO, "RSNXE in EAPOL-Key msg 3/4", |
| ie->rsnxe, ie->rsnxe_len); |
| wpa_sm_deauthenticate(sm, WLAN_REASON_IE_IN_4WAY_DIFFERS); |
| return -1; |
| } |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_key_mgmt_ft(sm->key_mgmt) && |
| wpa_supplicant_validate_ie_ft(sm, src_addr, ie) < 0) |
| return -1; |
| #endif /* CONFIG_IEEE80211R */ |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_supplicant_send_4_of_4 - Send message 4 of WPA/RSN 4-Way Handshake |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @dst: Destination address for the frame |
| * @key: Pointer to the EAPOL-Key frame header |
| * @ver: Version bits from EAPOL-Key Key Info |
| * @key_info: Key Info |
| * @ptk: PTK to use for keyed hash and encryption |
| * Returns: >= 0 on success, < 0 on failure |
| */ |
| int wpa_supplicant_send_4_of_4(struct wpa_sm *sm, const unsigned char *dst, |
| const struct wpa_eapol_key *key, |
| u16 ver, u16 key_info, |
| struct wpa_ptk *ptk) |
| { |
| size_t mic_len, hdrlen, rlen; |
| struct wpa_eapol_key *reply; |
| u8 *rbuf, *key_mic; |
| |
| mic_len = wpa_mic_len(sm->key_mgmt, sm->pmk_len); |
| hdrlen = sizeof(*reply) + mic_len + 2; |
| rbuf = wpa_sm_alloc_eapol(sm, IEEE802_1X_TYPE_EAPOL_KEY, NULL, |
| hdrlen, &rlen, (void *) &reply); |
| if (rbuf == NULL) |
| return -1; |
| |
| reply->type = (sm->proto == WPA_PROTO_RSN || |
| sm->proto == WPA_PROTO_OSEN) ? |
| EAPOL_KEY_TYPE_RSN : EAPOL_KEY_TYPE_WPA; |
| key_info &= WPA_KEY_INFO_SECURE; |
| key_info |= ver | WPA_KEY_INFO_KEY_TYPE; |
| if (mic_len) |
| key_info |= WPA_KEY_INFO_MIC; |
| else |
| key_info |= WPA_KEY_INFO_ENCR_KEY_DATA; |
| WPA_PUT_BE16(reply->key_info, key_info); |
| if (sm->proto == WPA_PROTO_RSN || sm->proto == WPA_PROTO_OSEN) |
| WPA_PUT_BE16(reply->key_length, 0); |
| else |
| os_memcpy(reply->key_length, key->key_length, 2); |
| os_memcpy(reply->replay_counter, key->replay_counter, |
| WPA_REPLAY_COUNTER_LEN); |
| |
| key_mic = (u8 *) (reply + 1); |
| WPA_PUT_BE16(key_mic + mic_len, 0); |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_INFO, "WPA: Sending EAPOL-Key 4/4"); |
| return wpa_eapol_key_send(sm, ptk, ver, dst, ETH_P_EAPOL, rbuf, rlen, |
| key_mic); |
| } |
| |
| |
| static void wpa_supplicant_process_3_of_4(struct wpa_sm *sm, |
| const struct wpa_eapol_key *key, |
| u16 ver, const u8 *key_data, |
| size_t key_data_len) |
| { |
| u16 key_info, keylen; |
| struct wpa_eapol_ie_parse ie; |
| |
| wpa_sm_set_state(sm, WPA_4WAY_HANDSHAKE); |
| wpa_dbg(sm->ctx->msg_ctx, MSG_INFO, "WPA: RX message 3 of 4-Way " |
| "Handshake from " MACSTR " (ver=%d)", MAC2STR(sm->bssid), ver); |
| |
| key_info = WPA_GET_BE16(key->key_info); |
| |
| wpa_hexdump(MSG_DEBUG, "WPA: IE KeyData", key_data, key_data_len); |
| if (wpa_supplicant_parse_ies(key_data, key_data_len, &ie) < 0) |
| goto failed; |
| if (ie.gtk && !(key_info & WPA_KEY_INFO_ENCR_KEY_DATA)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: GTK IE in unencrypted key data"); |
| goto failed; |
| } |
| if (ie.igtk && !(key_info & WPA_KEY_INFO_ENCR_KEY_DATA)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: IGTK KDE in unencrypted key data"); |
| goto failed; |
| } |
| |
| if (ie.igtk && |
| sm->mgmt_group_cipher != WPA_CIPHER_GTK_NOT_USED && |
| wpa_cipher_valid_mgmt_group(sm->mgmt_group_cipher) && |
| ie.igtk_len != WPA_IGTK_KDE_PREFIX_LEN + |
| (unsigned int) wpa_cipher_key_len(sm->mgmt_group_cipher)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Invalid IGTK KDE length %lu", |
| (unsigned long) ie.igtk_len); |
| goto failed; |
| } |
| |
| if (wpa_supplicant_validate_ie(sm, sm->bssid, &ie) < 0) |
| goto failed; |
| |
| if (wpa_handle_ext_key_id(sm, &ie)) |
| goto failed; |
| |
| if (os_memcmp(sm->anonce, key->key_nonce, WPA_NONCE_LEN) != 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: ANonce from message 1 of 4-Way Handshake " |
| "differs from 3 of 4-Way Handshake - drop packet (src=" |
| MACSTR ")", MAC2STR(sm->bssid)); |
| goto failed; |
| } |
| |
| keylen = WPA_GET_BE16(key->key_length); |
| if (keylen != wpa_cipher_key_len(sm->pairwise_cipher)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Invalid %s key length %d (src=" MACSTR |
| ")", wpa_cipher_txt(sm->pairwise_cipher), keylen, |
| MAC2STR(sm->bssid)); |
| goto failed; |
| } |
| |
| #ifdef CONFIG_P2P |
| if (ie.ip_addr_alloc) { |
| os_memcpy(sm->p2p_ip_addr, ie.ip_addr_alloc, 3 * 4); |
| wpa_hexdump(MSG_DEBUG, "P2P: IP address info", |
| sm->p2p_ip_addr, sizeof(sm->p2p_ip_addr)); |
| } |
| #endif /* CONFIG_P2P */ |
| |
| #ifdef CONFIG_OCV |
| if (wpa_sm_ocv_enabled(sm)) { |
| struct wpa_channel_info ci; |
| |
| if (wpa_sm_channel_info(sm, &ci) != 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "Failed to get channel info to validate received OCI in EAPOL-Key 3/4"); |
| return; |
| } |
| |
| if (ocv_verify_tx_params(ie.oci, ie.oci_len, &ci, |
| channel_width_to_int(ci.chanwidth), |
| ci.seg1_idx) != OCI_SUCCESS) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, OCV_FAILURE |
| "addr=" MACSTR " frame=eapol-key-m3 error=%s", |
| MAC2STR(sm->bssid), ocv_errorstr); |
| return; |
| } |
| } |
| #endif /* CONFIG_OCV */ |
| |
| #ifdef CONFIG_DPP2 |
| if (DPP_VERSION > 1 && ie.dpp_kde) { |
| wpa_printf(MSG_DEBUG, |
| "DPP: peer Protocol Version %u Flags 0x%x", |
| ie.dpp_kde[0], ie.dpp_kde[1]); |
| if (sm->key_mgmt == WPA_KEY_MGMT_DPP && sm->dpp_pfs != 2 && |
| (ie.dpp_kde[1] & DPP_KDE_PFS_ALLOWED) && !sm->dpp_z) { |
| wpa_printf(MSG_INFO, |
| "DPP: Peer indicated it supports PFS and local configuration allows this, but PFS was not negotiated for the association"); |
| goto failed; |
| } |
| } |
| #endif /* CONFIG_DPP2 */ |
| |
| if (sm->use_ext_key_id && |
| wpa_supplicant_install_ptk(sm, key, KEY_FLAG_RX)) |
| goto failed; |
| |
| if (wpa_supplicant_send_4_of_4(sm, sm->bssid, key, ver, key_info, |
| &sm->ptk) < 0) { |
| goto failed; |
| } |
| |
| /* SNonce was successfully used in msg 3/4, so mark it to be renewed |
| * for the next 4-Way Handshake. If msg 3 is received again, the old |
| * SNonce will still be used to avoid changing PTK. */ |
| sm->renew_snonce = 1; |
| |
| if (key_info & WPA_KEY_INFO_INSTALL) { |
| int res; |
| |
| if (sm->use_ext_key_id) |
| res = wpa_supplicant_activate_ptk(sm); |
| else |
| res = wpa_supplicant_install_ptk(sm, key, |
| KEY_FLAG_RX_TX); |
| if (res) |
| goto failed; |
| } |
| |
| if (key_info & WPA_KEY_INFO_SECURE) { |
| wpa_sm_mlme_setprotection( |
| sm, sm->bssid, MLME_SETPROTECTION_PROTECT_TYPE_RX, |
| MLME_SETPROTECTION_KEY_TYPE_PAIRWISE); |
| eapol_sm_notify_portValid(sm->eapol, true); |
| } |
| wpa_sm_set_state(sm, WPA_GROUP_HANDSHAKE); |
| |
| if (sm->group_cipher == WPA_CIPHER_GTK_NOT_USED) { |
| /* No GTK to be set to the driver */ |
| } else if (!ie.gtk && sm->proto == WPA_PROTO_RSN) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: No GTK KDE included in EAPOL-Key msg 3/4"); |
| goto failed; |
| } else if (ie.gtk && |
| wpa_supplicant_pairwise_gtk(sm, key, |
| ie.gtk, ie.gtk_len, key_info) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: Failed to configure GTK"); |
| goto failed; |
| } |
| |
| if (ieee80211w_set_keys(sm, &ie) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: Failed to configure IGTK"); |
| goto failed; |
| } |
| |
| if (sm->group_cipher == WPA_CIPHER_GTK_NOT_USED || ie.gtk) |
| wpa_supplicant_key_neg_complete(sm, sm->bssid, |
| key_info & WPA_KEY_INFO_SECURE); |
| |
| if (ie.gtk) |
| wpa_sm_set_rekey_offload(sm); |
| |
| /* Add PMKSA cache entry for Suite B AKMs here since PMKID can be |
| * calculated only after KCK has been derived. Though, do not replace an |
| * existing PMKSA entry after each 4-way handshake (i.e., new KCK/PMKID) |
| * to avoid unnecessary changes of PMKID while continuing to use the |
| * same PMK. */ |
| if (sm->proto == WPA_PROTO_RSN && wpa_key_mgmt_suite_b(sm->key_mgmt) && |
| !sm->cur_pmksa) { |
| struct rsn_pmksa_cache_entry *sa; |
| |
| sa = pmksa_cache_add(sm->pmksa, sm->pmk, sm->pmk_len, NULL, |
| sm->ptk.kck, sm->ptk.kck_len, |
| sm->bssid, sm->own_addr, |
| sm->network_ctx, sm->key_mgmt, NULL); |
| if (!sm->cur_pmksa) |
| sm->cur_pmksa = sa; |
| } |
| |
| if (ie.transition_disable) |
| wpa_sm_transition_disable(sm, ie.transition_disable[0]); |
| sm->msg_3_of_4_ok = 1; |
| return; |
| |
| failed: |
| wpa_sm_deauthenticate(sm, WLAN_REASON_UNSPECIFIED); |
| } |
| |
| |
| static int wpa_supplicant_process_1_of_2_rsn(struct wpa_sm *sm, |
| const u8 *keydata, |
| size_t keydatalen, |
| u16 key_info, |
| struct wpa_gtk_data *gd) |
| { |
| int maxkeylen; |
| struct wpa_eapol_ie_parse ie; |
| u16 gtk_len; |
| |
| wpa_hexdump_key(MSG_DEBUG, "RSN: msg 1/2 key data", |
| keydata, keydatalen); |
| if (wpa_supplicant_parse_ies(keydata, keydatalen, &ie) < 0) |
| return -1; |
| if (ie.gtk && !(key_info & WPA_KEY_INFO_ENCR_KEY_DATA)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: GTK IE in unencrypted key data"); |
| return -1; |
| } |
| if (ie.gtk == NULL) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: No GTK IE in Group Key msg 1/2"); |
| return -1; |
| } |
| gtk_len = ie.gtk_len; |
| if (gtk_len < 2) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: Invalid GTK KDE length (%u) in Group Key msg 1/2", |
| gtk_len); |
| return -1; |
| } |
| gtk_len -= 2; |
| if (gtk_len > sizeof(gd->gtk)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: Too long GTK in GTK KDE (len=%u)", gtk_len); |
| return -1; |
| } |
| maxkeylen = gd->gtk_len = gtk_len; |
| |
| #ifdef CONFIG_OCV |
| if (wpa_sm_ocv_enabled(sm)) { |
| struct wpa_channel_info ci; |
| |
| if (wpa_sm_channel_info(sm, &ci) != 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "Failed to get channel info to validate received OCI in EAPOL-Key group msg 1/2"); |
| return -1; |
| } |
| |
| if (ocv_verify_tx_params(ie.oci, ie.oci_len, &ci, |
| channel_width_to_int(ci.chanwidth), |
| ci.seg1_idx) != OCI_SUCCESS) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, OCV_FAILURE |
| "addr=" MACSTR " frame=eapol-key-g1 error=%s", |
| MAC2STR(sm->bssid), ocv_errorstr); |
| return -1; |
| } |
| } |
| #endif /* CONFIG_OCV */ |
| |
| if (wpa_supplicant_check_group_cipher(sm, sm->group_cipher, |
| gtk_len, maxkeylen, |
| &gd->key_rsc_len, &gd->alg)) |
| return -1; |
| |
| wpa_hexdump_key(MSG_DEBUG, "RSN: received GTK in group key handshake", |
| ie.gtk, 2 + gtk_len); |
| gd->keyidx = ie.gtk[0] & 0x3; |
| gd->tx = wpa_supplicant_gtk_tx_bit_workaround(sm, |
| !!(ie.gtk[0] & BIT(2))); |
| os_memcpy(gd->gtk, ie.gtk + 2, gtk_len); |
| |
| if (ieee80211w_set_keys(sm, &ie) < 0) |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: Failed to configure IGTK"); |
| |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_process_1_of_2_wpa(struct wpa_sm *sm, |
| const struct wpa_eapol_key *key, |
| const u8 *key_data, |
| size_t key_data_len, u16 key_info, |
| u16 ver, struct wpa_gtk_data *gd) |
| { |
| size_t maxkeylen; |
| u16 gtk_len; |
| |
| gtk_len = WPA_GET_BE16(key->key_length); |
| maxkeylen = key_data_len; |
| if (ver == WPA_KEY_INFO_TYPE_HMAC_SHA1_AES) { |
| if (maxkeylen < 8) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Too short maxkeylen (%lu)", |
| (unsigned long) maxkeylen); |
| return -1; |
| } |
| maxkeylen -= 8; |
| } |
| |
| if (gtk_len > maxkeylen || |
| wpa_supplicant_check_group_cipher(sm, sm->group_cipher, |
| gtk_len, maxkeylen, |
| &gd->key_rsc_len, &gd->alg)) |
| return -1; |
| |
| gd->gtk_len = gtk_len; |
| gd->keyidx = (key_info & WPA_KEY_INFO_KEY_INDEX_MASK) >> |
| WPA_KEY_INFO_KEY_INDEX_SHIFT; |
| if (ver == WPA_KEY_INFO_TYPE_HMAC_MD5_RC4 && sm->ptk.kek_len == 16) { |
| #ifdef CONFIG_NO_RC4 |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: RC4 not supported in the build"); |
| return -1; |
| #else /* CONFIG_NO_RC4 */ |
| u8 ek[32]; |
| if (key_data_len > sizeof(gd->gtk)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: RC4 key data too long (%lu)", |
| (unsigned long) key_data_len); |
| return -1; |
| } |
| os_memcpy(ek, key->key_iv, 16); |
| os_memcpy(ek + 16, sm->ptk.kek, sm->ptk.kek_len); |
| os_memcpy(gd->gtk, key_data, key_data_len); |
| if (rc4_skip(ek, 32, 256, gd->gtk, key_data_len)) { |
| forced_memzero(ek, sizeof(ek)); |
| wpa_msg(sm->ctx->msg_ctx, MSG_ERROR, |
| "WPA: RC4 failed"); |
| return -1; |
| } |
| forced_memzero(ek, sizeof(ek)); |
| #endif /* CONFIG_NO_RC4 */ |
| } else if (ver == WPA_KEY_INFO_TYPE_HMAC_SHA1_AES) { |
| if (maxkeylen % 8) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Unsupported AES-WRAP len %lu", |
| (unsigned long) maxkeylen); |
| return -1; |
| } |
| if (maxkeylen > sizeof(gd->gtk)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: AES-WRAP key data " |
| "too long (keydatalen=%lu maxkeylen=%lu)", |
| (unsigned long) key_data_len, |
| (unsigned long) maxkeylen); |
| return -1; |
| } |
| if (aes_unwrap(sm->ptk.kek, sm->ptk.kek_len, maxkeylen / 8, |
| key_data, gd->gtk)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: AES unwrap failed - could not decrypt " |
| "GTK"); |
| return -1; |
| } |
| } else { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Unsupported key_info type %d", ver); |
| return -1; |
| } |
| gd->tx = wpa_supplicant_gtk_tx_bit_workaround( |
| sm, !!(key_info & WPA_KEY_INFO_TXRX)); |
| return 0; |
| } |
| |
| |
| static int wpa_supplicant_send_2_of_2(struct wpa_sm *sm, |
| const struct wpa_eapol_key *key, |
| int ver, u16 key_info) |
| { |
| size_t mic_len, hdrlen, rlen; |
| struct wpa_eapol_key *reply; |
| u8 *rbuf, *key_mic; |
| size_t kde_len = 0; |
| |
| #ifdef CONFIG_TESTING_OPTIONS |
| if (sm->disable_eapol_g2_tx) { |
| wpa_printf(MSG_INFO, "TEST: Disable sending EAPOL-Key 2/2"); |
| return 0; |
| } |
| #endif /* CONFIG_TESTING_OPTIONS */ |
| |
| #ifdef CONFIG_OCV |
| if (wpa_sm_ocv_enabled(sm)) |
| kde_len = OCV_OCI_KDE_LEN; |
| #endif /* CONFIG_OCV */ |
| |
| mic_len = wpa_mic_len(sm->key_mgmt, sm->pmk_len); |
| hdrlen = sizeof(*reply) + mic_len + 2; |
| rbuf = wpa_sm_alloc_eapol(sm, IEEE802_1X_TYPE_EAPOL_KEY, NULL, |
| hdrlen + kde_len, &rlen, (void *) &reply); |
| if (rbuf == NULL) |
| return -1; |
| |
| reply->type = (sm->proto == WPA_PROTO_RSN || |
| sm->proto == WPA_PROTO_OSEN) ? |
| EAPOL_KEY_TYPE_RSN : EAPOL_KEY_TYPE_WPA; |
| key_info &= WPA_KEY_INFO_KEY_INDEX_MASK; |
| key_info |= ver | WPA_KEY_INFO_SECURE; |
| if (mic_len) |
| key_info |= WPA_KEY_INFO_MIC; |
| else |
| key_info |= WPA_KEY_INFO_ENCR_KEY_DATA; |
| WPA_PUT_BE16(reply->key_info, key_info); |
| if (sm->proto == WPA_PROTO_RSN || sm->proto == WPA_PROTO_OSEN) |
| WPA_PUT_BE16(reply->key_length, 0); |
| else |
| os_memcpy(reply->key_length, key->key_length, 2); |
| os_memcpy(reply->replay_counter, key->replay_counter, |
| WPA_REPLAY_COUNTER_LEN); |
| |
| key_mic = (u8 *) (reply + 1); |
| WPA_PUT_BE16(key_mic + mic_len, kde_len); /* Key Data Length */ |
| |
| #ifdef CONFIG_OCV |
| if (wpa_sm_ocv_enabled(sm)) { |
| struct wpa_channel_info ci; |
| u8 *pos; |
| |
| if (wpa_sm_channel_info(sm, &ci) != 0) { |
| wpa_printf(MSG_WARNING, |
| "Failed to get channel info for OCI element in EAPOL-Key 2/2"); |
| os_free(rbuf); |
| return -1; |
| } |
| #ifdef CONFIG_TESTING_OPTIONS |
| if (sm->oci_freq_override_eapol_g2) { |
| wpa_printf(MSG_INFO, |
| "TEST: Override OCI KDE frequency %d -> %d MHz", |
| ci.frequency, |
| sm->oci_freq_override_eapol_g2); |
| ci.frequency = sm->oci_freq_override_eapol_g2; |
| } |
| #endif /* CONFIG_TESTING_OPTIONS */ |
| |
| pos = key_mic + mic_len + 2; /* Key Data */ |
| if (ocv_insert_oci_kde(&ci, &pos) < 0) { |
| os_free(rbuf); |
| return -1; |
| } |
| } |
| #endif /* CONFIG_OCV */ |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: Sending EAPOL-Key 2/2"); |
| return wpa_eapol_key_send(sm, &sm->ptk, ver, sm->bssid, ETH_P_EAPOL, |
| rbuf, rlen, key_mic); |
| } |
| |
| |
| static void wpa_supplicant_process_1_of_2(struct wpa_sm *sm, |
| const unsigned char *src_addr, |
| const struct wpa_eapol_key *key, |
| const u8 *key_data, |
| size_t key_data_len, u16 ver) |
| { |
| u16 key_info; |
| int rekey, ret; |
| struct wpa_gtk_data gd; |
| const u8 *key_rsc; |
| |
| if (!sm->msg_3_of_4_ok && !wpa_fils_is_completed(sm)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Group Key Handshake started prior to completion of 4-way handshake"); |
| goto failed; |
| } |
| |
| os_memset(&gd, 0, sizeof(gd)); |
| |
| rekey = wpa_sm_get_state(sm) == WPA_COMPLETED; |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: RX message 1 of Group Key " |
| "Handshake from " MACSTR " (ver=%d)", MAC2STR(src_addr), ver); |
| |
| key_info = WPA_GET_BE16(key->key_info); |
| |
| if (sm->proto == WPA_PROTO_RSN || sm->proto == WPA_PROTO_OSEN) { |
| ret = wpa_supplicant_process_1_of_2_rsn(sm, key_data, |
| key_data_len, key_info, |
| &gd); |
| } else { |
| ret = wpa_supplicant_process_1_of_2_wpa(sm, key, key_data, |
| key_data_len, |
| key_info, ver, &gd); |
| } |
| |
| wpa_sm_set_state(sm, WPA_GROUP_HANDSHAKE); |
| |
| if (ret) |
| goto failed; |
| |
| key_rsc = key->key_rsc; |
| if (wpa_supplicant_rsc_relaxation(sm, key->key_rsc)) |
| key_rsc = null_rsc; |
| |
| if (wpa_supplicant_install_gtk(sm, &gd, key_rsc, 0) || |
| wpa_supplicant_send_2_of_2(sm, key, ver, key_info) < 0) |
| goto failed; |
| forced_memzero(&gd, sizeof(gd)); |
| |
| if (rekey) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, "WPA: Group rekeying " |
| "completed with " MACSTR " [GTK=%s]", |
| MAC2STR(sm->bssid), wpa_cipher_txt(sm->group_cipher)); |
| wpa_sm_cancel_auth_timeout(sm); |
| wpa_sm_set_state(sm, WPA_COMPLETED); |
| } else { |
| wpa_supplicant_key_neg_complete(sm, sm->bssid, |
| key_info & |
| WPA_KEY_INFO_SECURE); |
| } |
| |
| wpa_sm_set_rekey_offload(sm); |
| |
| return; |
| |
| failed: |
| forced_memzero(&gd, sizeof(gd)); |
| wpa_sm_deauthenticate(sm, WLAN_REASON_UNSPECIFIED); |
| } |
| |
| |
| static int wpa_supplicant_verify_eapol_key_mic(struct wpa_sm *sm, |
| struct wpa_eapol_key *key, |
| u16 ver, |
| const u8 *buf, size_t len) |
| { |
| u8 mic[WPA_EAPOL_KEY_MIC_MAX_LEN]; |
| int ok = 0; |
| size_t mic_len = wpa_mic_len(sm->key_mgmt, sm->pmk_len); |
| |
| os_memcpy(mic, key + 1, mic_len); |
| if (sm->tptk_set) { |
| os_memset(key + 1, 0, mic_len); |
| if (wpa_eapol_key_mic(sm->tptk.kck, sm->tptk.kck_len, |
| sm->key_mgmt, |
| ver, buf, len, (u8 *) (key + 1)) < 0 || |
| os_memcmp_const(mic, key + 1, mic_len) != 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Invalid EAPOL-Key MIC " |
| "when using TPTK - ignoring TPTK"); |
| #ifdef TEST_FUZZ |
| wpa_printf(MSG_INFO, |
| "TEST: Ignore Key MIC failure for fuzz testing"); |
| goto continue_fuzz; |
| #endif /* TEST_FUZZ */ |
| } else { |
| #ifdef TEST_FUZZ |
| continue_fuzz: |
| #endif /* TEST_FUZZ */ |
| ok = 1; |
| sm->tptk_set = 0; |
| sm->ptk_set = 1; |
| os_memcpy(&sm->ptk, &sm->tptk, sizeof(sm->ptk)); |
| os_memset(&sm->tptk, 0, sizeof(sm->tptk)); |
| /* |
| * This assures the same TPTK in sm->tptk can never be |
| * copied twice to sm->ptk as the new PTK. In |
| * combination with the installed flag in the wpa_ptk |
| * struct, this assures the same PTK is only installed |
| * once. |
| */ |
| sm->renew_snonce = 1; |
| } |
| } |
| |
| if (!ok && sm->ptk_set) { |
| os_memset(key + 1, 0, mic_len); |
| if (wpa_eapol_key_mic(sm->ptk.kck, sm->ptk.kck_len, |
| sm->key_mgmt, |
| ver, buf, len, (u8 *) (key + 1)) < 0 || |
| os_memcmp_const(mic, key + 1, mic_len) != 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Invalid EAPOL-Key MIC - " |
| "dropping packet"); |
| #ifdef TEST_FUZZ |
| wpa_printf(MSG_INFO, |
| "TEST: Ignore Key MIC failure for fuzz testing"); |
| goto continue_fuzz2; |
| #endif /* TEST_FUZZ */ |
| return -1; |
| } |
| #ifdef TEST_FUZZ |
| continue_fuzz2: |
| #endif /* TEST_FUZZ */ |
| ok = 1; |
| } |
| |
| if (!ok) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Could not verify EAPOL-Key MIC - " |
| "dropping packet"); |
| return -1; |
| } |
| |
| os_memcpy(sm->rx_replay_counter, key->replay_counter, |
| WPA_REPLAY_COUNTER_LEN); |
| sm->rx_replay_counter_set = 1; |
| return 0; |
| } |
| |
| |
| /* Decrypt RSN EAPOL-Key key data (RC4 or AES-WRAP) */ |
| static int wpa_supplicant_decrypt_key_data(struct wpa_sm *sm, |
| struct wpa_eapol_key *key, |
| size_t mic_len, u16 ver, |
| u8 *key_data, size_t *key_data_len) |
| { |
| wpa_hexdump(MSG_DEBUG, "RSN: encrypted key data", |
| key_data, *key_data_len); |
| if (!sm->ptk_set) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: PTK not available, cannot decrypt EAPOL-Key Key " |
| "Data"); |
| return -1; |
| } |
| |
| /* Decrypt key data here so that this operation does not need |
| * to be implemented separately for each message type. */ |
| if (ver == WPA_KEY_INFO_TYPE_HMAC_MD5_RC4 && sm->ptk.kek_len == 16) { |
| #ifdef CONFIG_NO_RC4 |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: RC4 not supported in the build"); |
| return -1; |
| #else /* CONFIG_NO_RC4 */ |
| u8 ek[32]; |
| |
| wpa_printf(MSG_DEBUG, "WPA: Decrypt Key Data using RC4"); |
| os_memcpy(ek, key->key_iv, 16); |
| os_memcpy(ek + 16, sm->ptk.kek, sm->ptk.kek_len); |
| if (rc4_skip(ek, 32, 256, key_data, *key_data_len)) { |
| forced_memzero(ek, sizeof(ek)); |
| wpa_msg(sm->ctx->msg_ctx, MSG_ERROR, |
| "WPA: RC4 failed"); |
| return -1; |
| } |
| forced_memzero(ek, sizeof(ek)); |
| #endif /* CONFIG_NO_RC4 */ |
| } else if (ver == WPA_KEY_INFO_TYPE_HMAC_SHA1_AES || |
| ver == WPA_KEY_INFO_TYPE_AES_128_CMAC || |
| wpa_use_aes_key_wrap(sm->key_mgmt)) { |
| u8 *buf; |
| |
| wpa_printf(MSG_DEBUG, |
| "WPA: Decrypt Key Data using AES-UNWRAP (KEK length %u)", |
| (unsigned int) sm->ptk.kek_len); |
| if (*key_data_len < 8 || *key_data_len % 8) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Unsupported AES-WRAP len %u", |
| (unsigned int) *key_data_len); |
| return -1; |
| } |
| *key_data_len -= 8; /* AES-WRAP adds 8 bytes */ |
| buf = os_malloc(*key_data_len); |
| if (buf == NULL) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: No memory for AES-UNWRAP buffer"); |
| return -1; |
| } |
| #ifdef TEST_FUZZ |
| os_memset(buf, 0x11, *key_data_len); |
| #endif /* TEST_FUZZ */ |
| if (aes_unwrap(sm->ptk.kek, sm->ptk.kek_len, *key_data_len / 8, |
| key_data, buf)) { |
| #ifdef TEST_FUZZ |
| wpa_printf(MSG_INFO, |
| "TEST: Ignore AES unwrap failure for fuzz testing"); |
| goto continue_fuzz; |
| #endif /* TEST_FUZZ */ |
| bin_clear_free(buf, *key_data_len); |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: AES unwrap failed - " |
| "could not decrypt EAPOL-Key key data"); |
| return -1; |
| } |
| #ifdef TEST_FUZZ |
| continue_fuzz: |
| #endif /* TEST_FUZZ */ |
| os_memcpy(key_data, buf, *key_data_len); |
| bin_clear_free(buf, *key_data_len); |
| WPA_PUT_BE16(((u8 *) (key + 1)) + mic_len, *key_data_len); |
| } else { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Unsupported key_info type %d", ver); |
| return -1; |
| } |
| wpa_hexdump_key(MSG_DEBUG, "WPA: decrypted EAPOL-Key key data", |
| key_data, *key_data_len); |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_sm_aborted_cached - Notify WPA that PMKSA caching was aborted |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| */ |
| void wpa_sm_aborted_cached(struct wpa_sm *sm) |
| { |
| if (sm && sm->cur_pmksa) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Cancelling PMKSA caching attempt"); |
| sm->cur_pmksa = NULL; |
| } |
| } |
| |
| |
| void wpa_sm_aborted_external_cached(struct wpa_sm *sm) |
| { |
| if (sm && sm->cur_pmksa && sm->cur_pmksa->external) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: Cancelling external PMKSA caching attempt"); |
| sm->cur_pmksa = NULL; |
| } |
| } |
| |
| |
| static void wpa_eapol_key_dump(struct wpa_sm *sm, |
| const struct wpa_eapol_key *key, |
| unsigned int key_data_len, |
| const u8 *mic, unsigned int mic_len) |
| { |
| #ifndef CONFIG_NO_STDOUT_DEBUG |
| u16 key_info = WPA_GET_BE16(key->key_info); |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, " EAPOL-Key type=%d", key->type); |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| " key_info 0x%x (ver=%d keyidx=%d rsvd=%d %s%s%s%s%s%s%s%s)", |
| key_info, key_info & WPA_KEY_INFO_TYPE_MASK, |
| (key_info & WPA_KEY_INFO_KEY_INDEX_MASK) >> |
| WPA_KEY_INFO_KEY_INDEX_SHIFT, |
| (key_info & (BIT(13) | BIT(14) | BIT(15))) >> 13, |
| key_info & WPA_KEY_INFO_KEY_TYPE ? "Pairwise" : "Group", |
| key_info & WPA_KEY_INFO_INSTALL ? " Install" : "", |
| key_info & WPA_KEY_INFO_ACK ? " Ack" : "", |
| key_info & WPA_KEY_INFO_MIC ? " MIC" : "", |
| key_info & WPA_KEY_INFO_SECURE ? " Secure" : "", |
| key_info & WPA_KEY_INFO_ERROR ? " Error" : "", |
| key_info & WPA_KEY_INFO_REQUEST ? " Request" : "", |
| key_info & WPA_KEY_INFO_ENCR_KEY_DATA ? " Encr" : ""); |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| " key_length=%u key_data_length=%u", |
| WPA_GET_BE16(key->key_length), key_data_len); |
| wpa_hexdump(MSG_DEBUG, " replay_counter", |
| key->replay_counter, WPA_REPLAY_COUNTER_LEN); |
| wpa_hexdump(MSG_DEBUG, " key_nonce", key->key_nonce, WPA_NONCE_LEN); |
| wpa_hexdump(MSG_DEBUG, " key_iv", key->key_iv, 16); |
| wpa_hexdump(MSG_DEBUG, " key_rsc", key->key_rsc, 8); |
| wpa_hexdump(MSG_DEBUG, " key_id (reserved)", key->key_id, 8); |
| wpa_hexdump(MSG_DEBUG, " key_mic", mic, mic_len); |
| #endif /* CONFIG_NO_STDOUT_DEBUG */ |
| } |
| |
| |
| #ifdef CONFIG_FILS |
| static int wpa_supp_aead_decrypt(struct wpa_sm *sm, u8 *buf, size_t buf_len, |
| size_t *key_data_len) |
| { |
| struct wpa_ptk *ptk; |
| struct ieee802_1x_hdr *hdr; |
| struct wpa_eapol_key *key; |
| u8 *pos, *tmp; |
| const u8 *aad[1]; |
| size_t aad_len[1]; |
| |
| if (*key_data_len < AES_BLOCK_SIZE) { |
| wpa_printf(MSG_INFO, "No room for AES-SIV data in the frame"); |
| return -1; |
| } |
| |
| if (sm->tptk_set) |
| ptk = &sm->tptk; |
| else if (sm->ptk_set) |
| ptk = &sm->ptk; |
| else |
| return -1; |
| |
| hdr = (struct ieee802_1x_hdr *) buf; |
| key = (struct wpa_eapol_key *) (hdr + 1); |
| pos = (u8 *) (key + 1); |
| pos += 2; /* Pointing at the Encrypted Key Data field */ |
| |
| tmp = os_malloc(*key_data_len); |
| if (!tmp) |
| return -1; |
| |
| /* AES-SIV AAD from EAPOL protocol version field (inclusive) to |
| * to Key Data (exclusive). */ |
| aad[0] = buf; |
| aad_len[0] = pos - buf; |
| if (aes_siv_decrypt(ptk->kek, ptk->kek_len, pos, *key_data_len, |
| 1, aad, aad_len, tmp) < 0) { |
| wpa_printf(MSG_INFO, "Invalid AES-SIV data in the frame"); |
| bin_clear_free(tmp, *key_data_len); |
| return -1; |
| } |
| |
| /* AEAD decryption and validation completed successfully */ |
| (*key_data_len) -= AES_BLOCK_SIZE; |
| wpa_hexdump_key(MSG_DEBUG, "WPA: Decrypted Key Data", |
| tmp, *key_data_len); |
| |
| /* Replace Key Data field with the decrypted version */ |
| os_memcpy(pos, tmp, *key_data_len); |
| pos -= 2; /* Key Data Length field */ |
| WPA_PUT_BE16(pos, *key_data_len); |
| bin_clear_free(tmp, *key_data_len); |
| |
| if (sm->tptk_set) { |
| sm->tptk_set = 0; |
| sm->ptk_set = 1; |
| os_memcpy(&sm->ptk, &sm->tptk, sizeof(sm->ptk)); |
| os_memset(&sm->tptk, 0, sizeof(sm->tptk)); |
| } |
| |
| os_memcpy(sm->rx_replay_counter, key->replay_counter, |
| WPA_REPLAY_COUNTER_LEN); |
| sm->rx_replay_counter_set = 1; |
| |
| return 0; |
| } |
| #endif /* CONFIG_FILS */ |
| |
| |
| /** |
| * wpa_sm_rx_eapol - Process received WPA EAPOL frames |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @src_addr: Source MAC address of the EAPOL packet |
| * @buf: Pointer to the beginning of the EAPOL data (EAPOL header) |
| * @len: Length of the EAPOL frame |
| * Returns: 1 = WPA EAPOL-Key processed, 0 = not a WPA EAPOL-Key, -1 failure |
| * |
| * This function is called for each received EAPOL frame. Other than EAPOL-Key |
| * frames can be skipped if filtering is done elsewhere. wpa_sm_rx_eapol() is |
| * only processing WPA and WPA2 EAPOL-Key frames. |
| * |
| * The received EAPOL-Key packets are validated and valid packets are replied |
| * to. In addition, key material (PTK, GTK) is configured at the end of a |
| * successful key handshake. |
| */ |
| int wpa_sm_rx_eapol(struct wpa_sm *sm, const u8 *src_addr, |
| const u8 *buf, size_t len) |
| { |
| size_t plen, data_len, key_data_len; |
| const struct ieee802_1x_hdr *hdr; |
| struct wpa_eapol_key *key; |
| u16 key_info, ver; |
| u8 *tmp = NULL; |
| int ret = -1; |
| u8 *mic, *key_data; |
| size_t mic_len, keyhdrlen, pmk_len; |
| |
| #ifdef CONFIG_IEEE80211R |
| sm->ft_completed = 0; |
| #endif /* CONFIG_IEEE80211R */ |
| |
| pmk_len = sm->pmk_len; |
| if (!pmk_len && sm->cur_pmksa) |
| pmk_len = sm->cur_pmksa->pmk_len; |
| mic_len = wpa_mic_len(sm->key_mgmt, pmk_len); |
| keyhdrlen = sizeof(*key) + mic_len + 2; |
| |
| if (len < sizeof(*hdr) + keyhdrlen) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: EAPOL frame too short to be a WPA " |
| "EAPOL-Key (len %lu, expecting at least %lu)", |
| (unsigned long) len, |
| (unsigned long) sizeof(*hdr) + keyhdrlen); |
| return 0; |
| } |
| |
| hdr = (const struct ieee802_1x_hdr *) buf; |
| plen = be_to_host16(hdr->length); |
| data_len = plen + sizeof(*hdr); |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "IEEE 802.1X RX: version=%d type=%d length=%lu", |
| hdr->version, hdr->type, (unsigned long) plen); |
| |
| if (hdr->version < EAPOL_VERSION) { |
| /* TODO: backwards compatibility */ |
| } |
| if (hdr->type != IEEE802_1X_TYPE_EAPOL_KEY) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: EAPOL frame (type %u) discarded, " |
| "not a Key frame", hdr->type); |
| ret = 0; |
| goto out; |
| } |
| wpa_hexdump(MSG_MSGDUMP, "WPA: RX EAPOL-Key", buf, len); |
| if (plen > len - sizeof(*hdr) || plen < keyhdrlen) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: EAPOL frame payload size %lu " |
| "invalid (frame size %lu)", |
| (unsigned long) plen, (unsigned long) len); |
| ret = 0; |
| goto out; |
| } |
| if (data_len < len) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: ignoring %lu bytes after the IEEE 802.1X data", |
| (unsigned long) len - data_len); |
| } |
| |
| /* |
| * Make a copy of the frame since we need to modify the buffer during |
| * MAC validation and Key Data decryption. |
| */ |
| tmp = os_memdup(buf, data_len); |
| if (tmp == NULL) |
| goto out; |
| key = (struct wpa_eapol_key *) (tmp + sizeof(struct ieee802_1x_hdr)); |
| mic = (u8 *) (key + 1); |
| key_data = mic + mic_len + 2; |
| |
| if (key->type != EAPOL_KEY_TYPE_WPA && key->type != EAPOL_KEY_TYPE_RSN) |
| { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: EAPOL-Key type (%d) unknown, discarded", |
| key->type); |
| ret = 0; |
| goto out; |
| } |
| |
| key_data_len = WPA_GET_BE16(mic + mic_len); |
| wpa_eapol_key_dump(sm, key, key_data_len, mic, mic_len); |
| |
| if (key_data_len > plen - keyhdrlen) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, "WPA: Invalid EAPOL-Key " |
| "frame - key_data overflow (%u > %u)", |
| (unsigned int) key_data_len, |
| (unsigned int) (plen - keyhdrlen)); |
| goto out; |
| } |
| |
| eapol_sm_notify_lower_layer_success(sm->eapol, 0); |
| key_info = WPA_GET_BE16(key->key_info); |
| ver = key_info & WPA_KEY_INFO_TYPE_MASK; |
| if (ver != WPA_KEY_INFO_TYPE_HMAC_MD5_RC4 && |
| ver != WPA_KEY_INFO_TYPE_AES_128_CMAC && |
| ver != WPA_KEY_INFO_TYPE_HMAC_SHA1_AES && |
| !wpa_use_akm_defined(sm->key_mgmt)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Unsupported EAPOL-Key descriptor version %d", |
| ver); |
| goto out; |
| } |
| |
| if (wpa_use_akm_defined(sm->key_mgmt) && |
| ver != WPA_KEY_INFO_TYPE_AKM_DEFINED) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "RSN: Unsupported EAPOL-Key descriptor version %d (expected AKM defined = 0)", |
| ver); |
| goto out; |
| } |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_key_mgmt_ft(sm->key_mgmt)) { |
| /* IEEE 802.11r uses a new key_info type (AES-128-CMAC). */ |
| if (ver != WPA_KEY_INFO_TYPE_AES_128_CMAC && |
| !wpa_use_akm_defined(sm->key_mgmt)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "FT: AP did not use AES-128-CMAC"); |
| goto out; |
| } |
| } else |
| #endif /* CONFIG_IEEE80211R */ |
| if (wpa_key_mgmt_sha256(sm->key_mgmt)) { |
| if (ver != WPA_KEY_INFO_TYPE_AES_128_CMAC && |
| !wpa_use_akm_defined(sm->key_mgmt)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: AP did not use the " |
| "negotiated AES-128-CMAC"); |
| goto out; |
| } |
| } else if (sm->pairwise_cipher == WPA_CIPHER_CCMP && |
| !wpa_use_akm_defined(sm->key_mgmt) && |
| ver != WPA_KEY_INFO_TYPE_HMAC_SHA1_AES) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: CCMP is used, but EAPOL-Key " |
| "descriptor version (%d) is not 2", ver); |
| if (sm->group_cipher != WPA_CIPHER_CCMP && |
| !(key_info & WPA_KEY_INFO_KEY_TYPE)) { |
| /* Earlier versions of IEEE 802.11i did not explicitly |
| * require version 2 descriptor for all EAPOL-Key |
| * packets, so allow group keys to use version 1 if |
| * CCMP is not used for them. */ |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Backwards compatibility: allow invalid " |
| "version for non-CCMP group keys"); |
| } else if (ver == WPA_KEY_INFO_TYPE_AES_128_CMAC) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Interoperability workaround: allow incorrect (should have been HMAC-SHA1), but stronger (is AES-128-CMAC), descriptor version to be used"); |
| } else |
| goto out; |
| } else if (sm->pairwise_cipher == WPA_CIPHER_GCMP && |
| !wpa_use_akm_defined(sm->key_mgmt) && |
| ver != WPA_KEY_INFO_TYPE_HMAC_SHA1_AES) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: GCMP is used, but EAPOL-Key " |
| "descriptor version (%d) is not 2", ver); |
| goto out; |
| } |
| |
| if (sm->rx_replay_counter_set && |
| os_memcmp(key->replay_counter, sm->rx_replay_counter, |
| WPA_REPLAY_COUNTER_LEN) <= 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: EAPOL-Key Replay Counter did not increase - " |
| "dropping packet"); |
| goto out; |
| } |
| |
| if (key_info & WPA_KEY_INFO_SMK_MESSAGE) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Unsupported SMK bit in key_info"); |
| goto out; |
| } |
| |
| if (!(key_info & WPA_KEY_INFO_ACK)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: No Ack bit in key_info"); |
| goto out; |
| } |
| |
| if (key_info & WPA_KEY_INFO_REQUEST) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: EAPOL-Key with Request bit - dropped"); |
| goto out; |
| } |
| |
| if ((key_info & WPA_KEY_INFO_MIC) && |
| wpa_supplicant_verify_eapol_key_mic(sm, key, ver, tmp, data_len)) |
| goto out; |
| |
| #ifdef CONFIG_FILS |
| if (!mic_len && (key_info & WPA_KEY_INFO_ENCR_KEY_DATA)) { |
| if (wpa_supp_aead_decrypt(sm, tmp, data_len, &key_data_len)) |
| goto out; |
| } |
| #endif /* CONFIG_FILS */ |
| |
| if ((sm->proto == WPA_PROTO_RSN || sm->proto == WPA_PROTO_OSEN) && |
| (key_info & WPA_KEY_INFO_ENCR_KEY_DATA) && mic_len) { |
| /* |
| * Only decrypt the Key Data field if the frame's authenticity |
| * was verified. When using AES-SIV (FILS), the MIC flag is not |
| * set, so this check should only be performed if mic_len != 0 |
| * which is the case in this code branch. |
| */ |
| if (!(key_info & WPA_KEY_INFO_MIC)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Ignore EAPOL-Key with encrypted but unauthenticated data"); |
| goto out; |
| } |
| if (wpa_supplicant_decrypt_key_data(sm, key, mic_len, |
| ver, key_data, |
| &key_data_len)) |
| goto out; |
| } |
| |
| if (key_info & WPA_KEY_INFO_KEY_TYPE) { |
| if (key_info & WPA_KEY_INFO_KEY_INDEX_MASK) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: Ignored EAPOL-Key (Pairwise) with " |
| "non-zero key index"); |
| goto out; |
| } |
| if (key_info & (WPA_KEY_INFO_MIC | |
| WPA_KEY_INFO_ENCR_KEY_DATA)) { |
| /* 3/4 4-Way Handshake */ |
| wpa_supplicant_process_3_of_4(sm, key, ver, key_data, |
| key_data_len); |
| } else { |
| /* 1/4 4-Way Handshake */ |
| wpa_supplicant_process_1_of_4(sm, src_addr, key, |
| ver, key_data, |
| key_data_len); |
| } |
| } else { |
| if ((mic_len && (key_info & WPA_KEY_INFO_MIC)) || |
| (!mic_len && (key_info & WPA_KEY_INFO_ENCR_KEY_DATA))) { |
| /* 1/2 Group Key Handshake */ |
| wpa_supplicant_process_1_of_2(sm, src_addr, key, |
| key_data, key_data_len, |
| ver); |
| } else { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "WPA: EAPOL-Key (Group) without Mic/Encr bit - " |
| "dropped"); |
| } |
| } |
| |
| ret = 1; |
| |
| out: |
| bin_clear_free(tmp, data_len); |
| return ret; |
| } |
| |
| |
| #ifdef CONFIG_CTRL_IFACE |
| static u32 wpa_key_mgmt_suite(struct wpa_sm *sm) |
| { |
| switch (sm->key_mgmt) { |
| case WPA_KEY_MGMT_IEEE8021X: |
| return ((sm->proto == WPA_PROTO_RSN || |
| sm->proto == WPA_PROTO_OSEN) ? |
| RSN_AUTH_KEY_MGMT_UNSPEC_802_1X : |
| WPA_AUTH_KEY_MGMT_UNSPEC_802_1X); |
| case WPA_KEY_MGMT_PSK: |
| return (sm->proto == WPA_PROTO_RSN ? |
| RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X : |
| WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X); |
| #ifdef CONFIG_IEEE80211R |
| case WPA_KEY_MGMT_FT_IEEE8021X: |
| return RSN_AUTH_KEY_MGMT_FT_802_1X; |
| case WPA_KEY_MGMT_FT_PSK: |
| return RSN_AUTH_KEY_MGMT_FT_PSK; |
| #endif /* CONFIG_IEEE80211R */ |
| case WPA_KEY_MGMT_IEEE8021X_SHA256: |
| return RSN_AUTH_KEY_MGMT_802_1X_SHA256; |
| case WPA_KEY_MGMT_PSK_SHA256: |
| return RSN_AUTH_KEY_MGMT_PSK_SHA256; |
| case WPA_KEY_MGMT_CCKM: |
| return (sm->proto == WPA_PROTO_RSN ? |
| RSN_AUTH_KEY_MGMT_CCKM: |
| WPA_AUTH_KEY_MGMT_CCKM); |
| case WPA_KEY_MGMT_WPA_NONE: |
| return WPA_AUTH_KEY_MGMT_NONE; |
| case WPA_KEY_MGMT_IEEE8021X_SUITE_B: |
| return RSN_AUTH_KEY_MGMT_802_1X_SUITE_B; |
| case WPA_KEY_MGMT_IEEE8021X_SUITE_B_192: |
| return RSN_AUTH_KEY_MGMT_802_1X_SUITE_B_192; |
| default: |
| return 0; |
| } |
| } |
| |
| |
| #define RSN_SUITE "%02x-%02x-%02x-%d" |
| #define RSN_SUITE_ARG(s) \ |
| ((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff |
| |
| /** |
| * wpa_sm_get_mib - Dump text list of MIB entries |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @buf: Buffer for the list |
| * @buflen: Length of the buffer |
| * Returns: Number of bytes written to buffer |
| * |
| * This function is used fetch dot11 MIB variables. |
| */ |
| int wpa_sm_get_mib(struct wpa_sm *sm, char *buf, size_t buflen) |
| { |
| char pmkid_txt[PMKID_LEN * 2 + 1]; |
| bool rsna; |
| int ret; |
| size_t len; |
| |
| if (sm->cur_pmksa) { |
| wpa_snprintf_hex(pmkid_txt, sizeof(pmkid_txt), |
| sm->cur_pmksa->pmkid, PMKID_LEN); |
| } else |
| pmkid_txt[0] = '\0'; |
| |
| rsna = (wpa_key_mgmt_wpa_psk(sm->key_mgmt) || |
| wpa_key_mgmt_wpa_ieee8021x(sm->key_mgmt)) && |
| sm->proto == WPA_PROTO_RSN; |
| |
| ret = os_snprintf(buf, buflen, |
| "dot11RSNAOptionImplemented=TRUE\n" |
| "dot11RSNAPreauthenticationImplemented=TRUE\n" |
| "dot11RSNAEnabled=%s\n" |
| "dot11RSNAPreauthenticationEnabled=%s\n" |
| "dot11RSNAConfigVersion=%d\n" |
| "dot11RSNAConfigPairwiseKeysSupported=5\n" |
| "dot11RSNAConfigGroupCipherSize=%d\n" |
| "dot11RSNAConfigPMKLifetime=%d\n" |
| "dot11RSNAConfigPMKReauthThreshold=%d\n" |
| "dot11RSNAConfigNumberOfPTKSAReplayCounters=1\n" |
| "dot11RSNAConfigSATimeout=%d\n", |
| rsna ? "TRUE" : "FALSE", |
| rsna ? "TRUE" : "FALSE", |
| RSN_VERSION, |
| wpa_cipher_key_len(sm->group_cipher) * 8, |
| sm->dot11RSNAConfigPMKLifetime, |
| sm->dot11RSNAConfigPMKReauthThreshold, |
| sm->dot11RSNAConfigSATimeout); |
| if (os_snprintf_error(buflen, ret)) |
| return 0; |
| len = ret; |
| |
| ret = os_snprintf( |
| buf + len, buflen - len, |
| "dot11RSNAAuthenticationSuiteSelected=" RSN_SUITE "\n" |
| "dot11RSNAPairwiseCipherSelected=" RSN_SUITE "\n" |
| "dot11RSNAGroupCipherSelected=" RSN_SUITE "\n" |
| "dot11RSNAPMKIDUsed=%s\n" |
| "dot11RSNAAuthenticationSuiteRequested=" RSN_SUITE "\n" |
| "dot11RSNAPairwiseCipherRequested=" RSN_SUITE "\n" |
| "dot11RSNAGroupCipherRequested=" RSN_SUITE "\n" |
| "dot11RSNAConfigNumberOfGTKSAReplayCounters=0\n" |
| "dot11RSNA4WayHandshakeFailures=%u\n", |
| RSN_SUITE_ARG(wpa_key_mgmt_suite(sm)), |
| RSN_SUITE_ARG(wpa_cipher_to_suite(sm->proto, |
| sm->pairwise_cipher)), |
| RSN_SUITE_ARG(wpa_cipher_to_suite(sm->proto, |
| sm->group_cipher)), |
| pmkid_txt, |
| RSN_SUITE_ARG(wpa_key_mgmt_suite(sm)), |
| RSN_SUITE_ARG(wpa_cipher_to_suite(sm->proto, |
| sm->pairwise_cipher)), |
| RSN_SUITE_ARG(wpa_cipher_to_suite(sm->proto, |
| sm->group_cipher)), |
| sm->dot11RSNA4WayHandshakeFailures); |
| if (!os_snprintf_error(buflen - len, ret)) |
| len += ret; |
| |
| return (int) len; |
| } |
| #endif /* CONFIG_CTRL_IFACE */ |
| |
| |
| static void wpa_sm_pmksa_free_cb(struct rsn_pmksa_cache_entry *entry, |
| void *ctx, enum pmksa_free_reason reason) |
| { |
| struct wpa_sm *sm = ctx; |
| int deauth = 0; |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "RSN: PMKSA cache entry free_cb: " |
| MACSTR " reason=%d", MAC2STR(entry->aa), reason); |
| |
| if (sm->cur_pmksa == entry) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: %s current PMKSA entry", |
| reason == PMKSA_REPLACE ? "replaced" : "removed"); |
| pmksa_cache_clear_current(sm); |
| |
| /* |
| * If an entry is simply being replaced, there's no need to |
| * deauthenticate because it will be immediately re-added. |
| * This happens when EAP authentication is completed again |
| * (reauth or failed PMKSA caching attempt). |
| */ |
| if (reason != PMKSA_REPLACE) |
| deauth = 1; |
| } |
| |
| if (reason == PMKSA_EXPIRE && |
| (sm->pmk_len == entry->pmk_len && |
| os_memcmp(sm->pmk, entry->pmk, sm->pmk_len) == 0)) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: deauthenticating due to expired PMK"); |
| pmksa_cache_clear_current(sm); |
| deauth = 1; |
| } |
| |
| if (deauth) { |
| sm->pmk_len = 0; |
| os_memset(sm->pmk, 0, sizeof(sm->pmk)); |
| wpa_sm_deauthenticate(sm, WLAN_REASON_UNSPECIFIED); |
| } |
| } |
| |
| |
| static bool wpa_sm_pmksa_is_current_cb(struct rsn_pmksa_cache_entry *entry, |
| void *ctx) |
| { |
| struct wpa_sm *sm = ctx; |
| |
| return sm->cur_pmksa == entry; |
| } |
| |
| |
| /** |
| * wpa_sm_init - Initialize WPA state machine |
| * @ctx: Context pointer for callbacks; this needs to be an allocated buffer |
| * Returns: Pointer to the allocated WPA state machine data |
| * |
| * This function is used to allocate a new WPA state machine and the returned |
| * value is passed to all WPA state machine calls. |
| */ |
| struct wpa_sm * wpa_sm_init(struct wpa_sm_ctx *ctx) |
| { |
| struct wpa_sm *sm; |
| |
| sm = os_zalloc(sizeof(*sm)); |
| if (sm == NULL) |
| return NULL; |
| dl_list_init(&sm->pmksa_candidates); |
| sm->renew_snonce = 1; |
| sm->ctx = ctx; |
| |
| sm->dot11RSNAConfigPMKLifetime = 43200; |
| sm->dot11RSNAConfigPMKReauthThreshold = 70; |
| sm->dot11RSNAConfigSATimeout = 60; |
| |
| sm->pmksa = pmksa_cache_init(wpa_sm_pmksa_free_cb, |
| wpa_sm_pmksa_is_current_cb, sm, sm); |
| if (sm->pmksa == NULL) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_ERROR, |
| "RSN: PMKSA cache initialization failed"); |
| os_free(sm); |
| return NULL; |
| } |
| |
| return sm; |
| } |
| |
| |
| /** |
| * wpa_sm_deinit - Deinitialize WPA state machine |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| */ |
| void wpa_sm_deinit(struct wpa_sm *sm) |
| { |
| if (sm == NULL) |
| return; |
| pmksa_cache_deinit(sm->pmksa); |
| eloop_cancel_timeout(wpa_sm_start_preauth, sm, NULL); |
| eloop_cancel_timeout(wpa_sm_rekey_ptk, sm, NULL); |
| os_free(sm->assoc_wpa_ie); |
| os_free(sm->assoc_rsnxe); |
| os_free(sm->ap_wpa_ie); |
| os_free(sm->ap_rsn_ie); |
| os_free(sm->ap_rsnxe); |
| wpa_sm_drop_sa(sm); |
| os_free(sm->ctx); |
| #ifdef CONFIG_IEEE80211R |
| os_free(sm->assoc_resp_ies); |
| #endif /* CONFIG_IEEE80211R */ |
| #ifdef CONFIG_TESTING_OPTIONS |
| wpabuf_free(sm->test_assoc_ie); |
| #endif /* CONFIG_TESTING_OPTIONS */ |
| #ifdef CONFIG_FILS_SK_PFS |
| crypto_ecdh_deinit(sm->fils_ecdh); |
| #endif /* CONFIG_FILS_SK_PFS */ |
| #ifdef CONFIG_FILS |
| wpabuf_free(sm->fils_ft_ies); |
| #endif /* CONFIG_FILS */ |
| #ifdef CONFIG_OWE |
| crypto_ecdh_deinit(sm->owe_ecdh); |
| #endif /* CONFIG_OWE */ |
| #ifdef CONFIG_DPP2 |
| wpabuf_clear_free(sm->dpp_z); |
| #endif /* CONFIG_DPP2 */ |
| os_free(sm); |
| } |
| |
| |
| /** |
| * wpa_sm_notify_assoc - Notify WPA state machine about association |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @bssid: The BSSID of the new association |
| * |
| * This function is called to let WPA state machine know that the connection |
| * was established. |
| */ |
| void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) |
| { |
| int clear_keys = 1; |
| |
| if (sm == NULL) |
| return; |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Association event - clear replay counter"); |
| os_memcpy(sm->bssid, bssid, ETH_ALEN); |
| os_memset(sm->rx_replay_counter, 0, WPA_REPLAY_COUNTER_LEN); |
| sm->rx_replay_counter_set = 0; |
| sm->renew_snonce = 1; |
| if (os_memcmp(sm->preauth_bssid, bssid, ETH_ALEN) == 0) |
| rsn_preauth_deinit(sm); |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_ft_is_completed(sm)) { |
| /* |
| * Clear portValid to kick EAPOL state machine to re-enter |
| * AUTHENTICATED state to get the EAPOL port Authorized. |
| */ |
| eapol_sm_notify_portValid(sm->eapol, false); |
| wpa_supplicant_key_neg_complete(sm, sm->bssid, 1); |
| |
| /* Prepare for the next transition */ |
| wpa_ft_prepare_auth_request(sm, NULL); |
| |
| clear_keys = 0; |
| sm->ft_protocol = 1; |
| } else { |
| sm->ft_protocol = 0; |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| #ifdef CONFIG_FILS |
| if (sm->fils_completed) { |
| /* |
| * Clear portValid to kick EAPOL state machine to re-enter |
| * AUTHENTICATED state to get the EAPOL port Authorized. |
| */ |
| wpa_supplicant_key_neg_complete(sm, sm->bssid, 1); |
| clear_keys = 0; |
| } |
| #endif /* CONFIG_FILS */ |
| |
| if (clear_keys) { |
| /* |
| * IEEE 802.11, 8.4.10: Delete PTK SA on (re)association if |
| * this is not part of a Fast BSS Transition. |
| */ |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: Clear old PTK"); |
| sm->ptk_set = 0; |
| os_memset(&sm->ptk, 0, sizeof(sm->ptk)); |
| sm->tptk_set = 0; |
| os_memset(&sm->tptk, 0, sizeof(sm->tptk)); |
| os_memset(&sm->gtk, 0, sizeof(sm->gtk)); |
| os_memset(&sm->gtk_wnm_sleep, 0, sizeof(sm->gtk_wnm_sleep)); |
| os_memset(&sm->igtk, 0, sizeof(sm->igtk)); |
| os_memset(&sm->igtk_wnm_sleep, 0, sizeof(sm->igtk_wnm_sleep)); |
| } |
| |
| #ifdef CONFIG_TDLS |
| wpa_tdls_assoc(sm); |
| #endif /* CONFIG_TDLS */ |
| |
| #ifdef CONFIG_P2P |
| os_memset(sm->p2p_ip_addr, 0, sizeof(sm->p2p_ip_addr)); |
| #endif /* CONFIG_P2P */ |
| |
| sm->keyidx_active = 0; |
| } |
| |
| |
| /** |
| * wpa_sm_notify_disassoc - Notify WPA state machine about disassociation |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * |
| * This function is called to let WPA state machine know that the connection |
| * was lost. This will abort any existing pre-authentication session. |
| */ |
| void wpa_sm_notify_disassoc(struct wpa_sm *sm) |
| { |
| eloop_cancel_timeout(wpa_sm_start_preauth, sm, NULL); |
| eloop_cancel_timeout(wpa_sm_rekey_ptk, sm, NULL); |
| rsn_preauth_deinit(sm); |
| pmksa_cache_clear_current(sm); |
| if (wpa_sm_get_state(sm) == WPA_4WAY_HANDSHAKE) |
| sm->dot11RSNA4WayHandshakeFailures++; |
| #ifdef CONFIG_TDLS |
| wpa_tdls_disassoc(sm); |
| #endif /* CONFIG_TDLS */ |
| #ifdef CONFIG_FILS |
| sm->fils_completed = 0; |
| #endif /* CONFIG_FILS */ |
| #ifdef CONFIG_IEEE80211R |
| sm->ft_reassoc_completed = 0; |
| sm->ft_protocol = 0; |
| #endif /* CONFIG_IEEE80211R */ |
| |
| /* Keys are not needed in the WPA state machine anymore */ |
| wpa_sm_drop_sa(sm); |
| sm->keyidx_active = 0; |
| |
| sm->msg_3_of_4_ok = 0; |
| os_memset(sm->bssid, 0, ETH_ALEN); |
| } |
| |
| |
| /** |
| * wpa_sm_set_pmk - Set PMK |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @pmk: The new PMK |
| * @pmk_len: The length of the new PMK in bytes |
| * @pmkid: Calculated PMKID |
| * @bssid: AA to add into PMKSA cache or %NULL to not cache the PMK |
| * |
| * Configure the PMK for WPA state machine. |
| */ |
| void wpa_sm_set_pmk(struct wpa_sm *sm, const u8 *pmk, size_t pmk_len, |
| const u8 *pmkid, const u8 *bssid) |
| { |
| if (sm == NULL) |
| return; |
| |
| wpa_hexdump_key(MSG_DEBUG, "WPA: Set PMK based on external data", |
| pmk, pmk_len); |
| sm->pmk_len = pmk_len; |
| os_memcpy(sm->pmk, pmk, pmk_len); |
| |
| #ifdef CONFIG_IEEE80211R |
| /* Set XXKey to be PSK for FT key derivation */ |
| sm->xxkey_len = pmk_len; |
| os_memcpy(sm->xxkey, pmk, pmk_len); |
| #endif /* CONFIG_IEEE80211R */ |
| |
| if (bssid) { |
| sm->cur_pmksa = pmksa_cache_add(sm->pmksa, pmk, pmk_len, |
| pmkid, NULL, 0, bssid, |
| sm->own_addr, |
| sm->network_ctx, sm->key_mgmt, |
| NULL); |
| } |
| } |
| |
| |
| /** |
| * wpa_sm_set_pmk_from_pmksa - Set PMK based on the current PMKSA |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * |
| * Take the PMK from the current PMKSA into use. If no PMKSA is active, the PMK |
| * will be cleared. |
| */ |
| void wpa_sm_set_pmk_from_pmksa(struct wpa_sm *sm) |
| { |
| if (sm == NULL) |
| return; |
| |
| if (sm->cur_pmksa) { |
| wpa_hexdump_key(MSG_DEBUG, |
| "WPA: Set PMK based on current PMKSA", |
| sm->cur_pmksa->pmk, sm->cur_pmksa->pmk_len); |
| sm->pmk_len = sm->cur_pmksa->pmk_len; |
| os_memcpy(sm->pmk, sm->cur_pmksa->pmk, sm->pmk_len); |
| } else { |
| wpa_printf(MSG_DEBUG, "WPA: No current PMKSA - clear PMK"); |
| sm->pmk_len = 0; |
| os_memset(sm->pmk, 0, PMK_LEN_MAX); |
| } |
| } |
| |
| |
| /** |
| * wpa_sm_set_fast_reauth - Set fast reauthentication (EAP) enabled/disabled |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @fast_reauth: Whether fast reauthentication (EAP) is allowed |
| */ |
| void wpa_sm_set_fast_reauth(struct wpa_sm *sm, int fast_reauth) |
| { |
| if (sm) |
| sm->fast_reauth = fast_reauth; |
| } |
| |
| |
| /** |
| * wpa_sm_set_scard_ctx - Set context pointer for smartcard callbacks |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @scard_ctx: Context pointer for smartcard related callback functions |
| */ |
| void wpa_sm_set_scard_ctx(struct wpa_sm *sm, void *scard_ctx) |
| { |
| if (sm == NULL) |
| return; |
| sm->scard_ctx = scard_ctx; |
| if (sm->preauth_eapol) |
| eapol_sm_register_scard_ctx(sm->preauth_eapol, scard_ctx); |
| } |
| |
| |
| /** |
| * wpa_sm_set_config - Notification of current configuration change |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @config: Pointer to current network configuration |
| * |
| * Notify WPA state machine that configuration has changed. config will be |
| * stored as a backpointer to network configuration. This can be %NULL to clear |
| * the stored pointed. |
| */ |
| void wpa_sm_set_config(struct wpa_sm *sm, struct rsn_supp_config *config) |
| { |
| if (!sm) |
| return; |
| |
| if (config) { |
| sm->network_ctx = config->network_ctx; |
| sm->allowed_pairwise_cipher = config->allowed_pairwise_cipher; |
| sm->proactive_key_caching = config->proactive_key_caching; |
| sm->eap_workaround = config->eap_workaround; |
| sm->eap_conf_ctx = config->eap_conf_ctx; |
| if (config->ssid) { |
| os_memcpy(sm->ssid, config->ssid, config->ssid_len); |
| sm->ssid_len = config->ssid_len; |
| } else |
| sm->ssid_len = 0; |
| sm->wpa_ptk_rekey = config->wpa_ptk_rekey; |
| sm->p2p = config->p2p; |
| sm->wpa_rsc_relaxation = config->wpa_rsc_relaxation; |
| sm->owe_ptk_workaround = config->owe_ptk_workaround; |
| sm->force_kdk_derivation = config->force_kdk_derivation; |
| #ifdef CONFIG_FILS |
| if (config->fils_cache_id) { |
| sm->fils_cache_id_set = 1; |
| os_memcpy(sm->fils_cache_id, config->fils_cache_id, |
| FILS_CACHE_ID_LEN); |
| } else { |
| sm->fils_cache_id_set = 0; |
| } |
| #endif /* CONFIG_FILS */ |
| sm->beacon_prot = config->beacon_prot; |
| } else { |
| sm->network_ctx = NULL; |
| sm->allowed_pairwise_cipher = 0; |
| sm->proactive_key_caching = 0; |
| sm->eap_workaround = 0; |
| sm->eap_conf_ctx = NULL; |
| sm->ssid_len = 0; |
| sm->wpa_ptk_rekey = 0; |
| sm->p2p = 0; |
| sm->wpa_rsc_relaxation = 0; |
| sm->owe_ptk_workaround = 0; |
| sm->beacon_prot = 0; |
| sm->force_kdk_derivation = false; |
| } |
| } |
| |
| |
| /** |
| * wpa_sm_set_own_addr - Set own MAC address |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @addr: Own MAC address |
| */ |
| void wpa_sm_set_own_addr(struct wpa_sm *sm, const u8 *addr) |
| { |
| if (sm) |
| os_memcpy(sm->own_addr, addr, ETH_ALEN); |
| } |
| |
| |
| /** |
| * wpa_sm_set_ifname - Set network interface name |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @ifname: Interface name |
| * @bridge_ifname: Optional bridge interface name (for pre-auth) |
| */ |
| void wpa_sm_set_ifname(struct wpa_sm *sm, const char *ifname, |
| const char *bridge_ifname) |
| { |
| if (sm) { |
| sm->ifname = ifname; |
| sm->bridge_ifname = bridge_ifname; |
| } |
| } |
| |
| |
| /** |
| * wpa_sm_set_eapol - Set EAPOL state machine pointer |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @eapol: Pointer to EAPOL state machine allocated with eapol_sm_init() |
| */ |
| void wpa_sm_set_eapol(struct wpa_sm *sm, struct eapol_sm *eapol) |
| { |
| if (sm) |
| sm->eapol = eapol; |
| } |
| |
| |
| /** |
| * wpa_sm_set_param - Set WPA state machine parameters |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @param: Parameter field |
| * @value: Parameter value |
| * Returns: 0 on success, -1 on failure |
| */ |
| int wpa_sm_set_param(struct wpa_sm *sm, enum wpa_sm_conf_params param, |
| unsigned int value) |
| { |
| int ret = 0; |
| |
| if (sm == NULL) |
| return -1; |
| |
| switch (param) { |
| case RSNA_PMK_LIFETIME: |
| if (value > 0) |
| sm->dot11RSNAConfigPMKLifetime = value; |
| else |
| ret = -1; |
| break; |
| case RSNA_PMK_REAUTH_THRESHOLD: |
| if (value > 0 && value <= 100) |
| sm->dot11RSNAConfigPMKReauthThreshold = value; |
| else |
| ret = -1; |
| break; |
| case RSNA_SA_TIMEOUT: |
| if (value > 0) |
| sm->dot11RSNAConfigSATimeout = value; |
| else |
| ret = -1; |
| break; |
| case WPA_PARAM_PROTO: |
| sm->proto = value; |
| break; |
| case WPA_PARAM_PAIRWISE: |
| sm->pairwise_cipher = value; |
| break; |
| case WPA_PARAM_GROUP: |
| sm->group_cipher = value; |
| break; |
| case WPA_PARAM_KEY_MGMT: |
| sm->key_mgmt = value; |
| break; |
| case WPA_PARAM_MGMT_GROUP: |
| sm->mgmt_group_cipher = value; |
| break; |
| case WPA_PARAM_RSN_ENABLED: |
| sm->rsn_enabled = value; |
| break; |
| case WPA_PARAM_MFP: |
| sm->mfp = value; |
| break; |
| case WPA_PARAM_OCV: |
| sm->ocv = value; |
| break; |
| case WPA_PARAM_SAE_PWE: |
| sm->sae_pwe = value; |
| break; |
| case WPA_PARAM_SAE_PK: |
| sm->sae_pk = value; |
| break; |
| case WPA_PARAM_DENY_PTK0_REKEY: |
| sm->wpa_deny_ptk0_rekey = value; |
| break; |
| case WPA_PARAM_EXT_KEY_ID: |
| sm->ext_key_id = value; |
| break; |
| case WPA_PARAM_USE_EXT_KEY_ID: |
| sm->use_ext_key_id = value; |
| break; |
| #ifdef CONFIG_TESTING_OPTIONS |
| case WPA_PARAM_FT_RSNXE_USED: |
| sm->ft_rsnxe_used = value; |
| break; |
| case WPA_PARAM_OCI_FREQ_EAPOL: |
| sm->oci_freq_override_eapol = value; |
| break; |
| case WPA_PARAM_OCI_FREQ_EAPOL_G2: |
| sm->oci_freq_override_eapol_g2 = value; |
| break; |
| case WPA_PARAM_OCI_FREQ_FT_ASSOC: |
| sm->oci_freq_override_ft_assoc = value; |
| break; |
| case WPA_PARAM_OCI_FREQ_FILS_ASSOC: |
| sm->oci_freq_override_fils_assoc = value; |
| break; |
| case WPA_PARAM_DISABLE_EAPOL_G2_TX: |
| sm->disable_eapol_g2_tx = value; |
| break; |
| #endif /* CONFIG_TESTING_OPTIONS */ |
| #ifdef CONFIG_DPP2 |
| case WPA_PARAM_DPP_PFS: |
| sm->dpp_pfs = value; |
| break; |
| #endif /* CONFIG_DPP2 */ |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| |
| /** |
| * wpa_sm_get_status - Get WPA state machine |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @buf: Buffer for status information |
| * @buflen: Maximum buffer length |
| * @verbose: Whether to include verbose status information |
| * Returns: Number of bytes written to buf. |
| * |
| * Query WPA state machine for status information. This function fills in |
| * a text area with current status information. If the buffer (buf) is not |
| * large enough, status information will be truncated to fit the buffer. |
| */ |
| int wpa_sm_get_status(struct wpa_sm *sm, char *buf, size_t buflen, |
| int verbose) |
| { |
| char *pos = buf, *end = buf + buflen; |
| int ret; |
| |
| ret = os_snprintf(pos, end - pos, |
| "pairwise_cipher=%s\n" |
| "group_cipher=%s\n" |
| "key_mgmt=%s\n", |
| wpa_cipher_txt(sm->pairwise_cipher), |
| wpa_cipher_txt(sm->group_cipher), |
| wpa_key_mgmt_txt(sm->key_mgmt, sm->proto)); |
| if (os_snprintf_error(end - pos, ret)) |
| return pos - buf; |
| pos += ret; |
| |
| #ifdef CONFIG_DPP2 |
| if (sm->key_mgmt == WPA_KEY_MGMT_DPP && sm->dpp_z) { |
| ret = os_snprintf(pos, end - pos, "dpp_pfs=1\n"); |
| if (os_snprintf_error(end - pos, ret)) |
| return pos - buf; |
| pos += ret; |
| } |
| #endif /* CONFIG_DPP2 */ |
| |
| if (sm->mfp != NO_MGMT_FRAME_PROTECTION && sm->ap_rsn_ie) { |
| struct wpa_ie_data rsn; |
| if (wpa_parse_wpa_ie_rsn(sm->ap_rsn_ie, sm->ap_rsn_ie_len, &rsn) |
| >= 0 && |
| rsn.capabilities & (WPA_CAPABILITY_MFPR | |
| WPA_CAPABILITY_MFPC)) { |
| ret = os_snprintf(pos, end - pos, "pmf=%d\n" |
| "mgmt_group_cipher=%s\n", |
| (rsn.capabilities & |
| WPA_CAPABILITY_MFPR) ? 2 : 1, |
| wpa_cipher_txt( |
| sm->mgmt_group_cipher)); |
| if (os_snprintf_error(end - pos, ret)) |
| return pos - buf; |
| pos += ret; |
| } |
| } |
| |
| return pos - buf; |
| } |
| |
| |
| int wpa_sm_pmf_enabled(struct wpa_sm *sm) |
| { |
| struct wpa_ie_data rsn; |
| |
| if (sm->mfp == NO_MGMT_FRAME_PROTECTION || !sm->ap_rsn_ie) |
| return 0; |
| |
| if (wpa_parse_wpa_ie_rsn(sm->ap_rsn_ie, sm->ap_rsn_ie_len, &rsn) >= 0 && |
| rsn.capabilities & (WPA_CAPABILITY_MFPR | WPA_CAPABILITY_MFPC)) |
| return 1; |
| |
| return 0; |
| } |
| |
| |
| int wpa_sm_ext_key_id(struct wpa_sm *sm) |
| { |
| return sm ? sm->ext_key_id : 0; |
| } |
| |
| |
| int wpa_sm_ext_key_id_active(struct wpa_sm *sm) |
| { |
| return sm ? sm->use_ext_key_id : 0; |
| } |
| |
| |
| int wpa_sm_ocv_enabled(struct wpa_sm *sm) |
| { |
| struct wpa_ie_data rsn; |
| |
| if (!sm->ocv || !sm->ap_rsn_ie) |
| return 0; |
| |
| return wpa_parse_wpa_ie_rsn(sm->ap_rsn_ie, sm->ap_rsn_ie_len, |
| &rsn) >= 0 && |
| (rsn.capabilities & WPA_CAPABILITY_OCVC); |
| } |
| |
| |
| /** |
| * wpa_sm_set_assoc_wpa_ie_default - Generate own WPA/RSN IE from configuration |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @wpa_ie: Pointer to buffer for WPA/RSN IE |
| * @wpa_ie_len: Pointer to the length of the wpa_ie buffer |
| * Returns: 0 on success, -1 on failure |
| */ |
| int wpa_sm_set_assoc_wpa_ie_default(struct wpa_sm *sm, u8 *wpa_ie, |
| size_t *wpa_ie_len) |
| { |
| int res; |
| |
| if (sm == NULL) |
| return -1; |
| |
| #ifdef CONFIG_TESTING_OPTIONS |
| if (sm->test_assoc_ie) { |
| wpa_printf(MSG_DEBUG, |
| "TESTING: Replace association WPA/RSN IE"); |
| if (*wpa_ie_len < wpabuf_len(sm->test_assoc_ie)) |
| return -1; |
| os_memcpy(wpa_ie, wpabuf_head(sm->test_assoc_ie), |
| wpabuf_len(sm->test_assoc_ie)); |
| res = wpabuf_len(sm->test_assoc_ie); |
| } else |
| #endif /* CONFIG_TESTING_OPTIONS */ |
| res = wpa_gen_wpa_ie(sm, wpa_ie, *wpa_ie_len); |
| if (res < 0) |
| return -1; |
| *wpa_ie_len = res; |
| |
| wpa_hexdump(MSG_DEBUG, "WPA: Set own WPA IE default", |
| wpa_ie, *wpa_ie_len); |
| |
| if (sm->assoc_wpa_ie == NULL) { |
| /* |
| * Make a copy of the WPA/RSN IE so that 4-Way Handshake gets |
| * the correct version of the IE even if PMKSA caching is |
| * aborted (which would remove PMKID from IE generation). |
| */ |
| sm->assoc_wpa_ie = os_memdup(wpa_ie, *wpa_ie_len); |
| if (sm->assoc_wpa_ie == NULL) |
| return -1; |
| |
| sm->assoc_wpa_ie_len = *wpa_ie_len; |
| } else { |
| wpa_hexdump(MSG_DEBUG, |
| "WPA: Leave previously set WPA IE default", |
| sm->assoc_wpa_ie, sm->assoc_wpa_ie_len); |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_sm_set_assoc_wpa_ie - Set own WPA/RSN IE from (Re)AssocReq |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @ie: Pointer to IE data (starting from id) |
| * @len: IE length |
| * Returns: 0 on success, -1 on failure |
| * |
| * Inform WPA state machine about the WPA/RSN IE used in (Re)Association |
| * Request frame. The IE will be used to override the default value generated |
| * with wpa_sm_set_assoc_wpa_ie_default(). |
| */ |
| int wpa_sm_set_assoc_wpa_ie(struct wpa_sm *sm, const u8 *ie, size_t len) |
| { |
| if (sm == NULL) |
| return -1; |
| |
| os_free(sm->assoc_wpa_ie); |
| if (ie == NULL || len == 0) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: clearing own WPA/RSN IE"); |
| sm->assoc_wpa_ie = NULL; |
| sm->assoc_wpa_ie_len = 0; |
| } else { |
| wpa_hexdump(MSG_DEBUG, "WPA: set own WPA/RSN IE", ie, len); |
| sm->assoc_wpa_ie = os_memdup(ie, len); |
| if (sm->assoc_wpa_ie == NULL) |
| return -1; |
| |
| sm->assoc_wpa_ie_len = len; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_sm_set_assoc_rsnxe_default - Generate own RSNXE from configuration |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @rsnxe: Pointer to buffer for RSNXE |
| * @rsnxe_len: Pointer to the length of the rsne buffer |
| * Returns: 0 on success, -1 on failure |
| */ |
| int wpa_sm_set_assoc_rsnxe_default(struct wpa_sm *sm, u8 *rsnxe, |
| size_t *rsnxe_len) |
| { |
| int res; |
| |
| if (!sm) |
| return -1; |
| |
| res = wpa_gen_rsnxe(sm, rsnxe, *rsnxe_len); |
| if (res < 0) |
| return -1; |
| *rsnxe_len = res; |
| |
| wpa_hexdump(MSG_DEBUG, "RSN: Set own RSNXE default", rsnxe, *rsnxe_len); |
| |
| if (sm->assoc_rsnxe) { |
| wpa_hexdump(MSG_DEBUG, |
| "RSN: Leave previously set RSNXE default", |
| sm->assoc_rsnxe, sm->assoc_rsnxe_len); |
| } else if (*rsnxe_len > 0) { |
| /* |
| * Make a copy of the RSNXE so that 4-Way Handshake gets the |
| * correct version of the IE even if it gets changed. |
| */ |
| sm->assoc_rsnxe = os_memdup(rsnxe, *rsnxe_len); |
| if (!sm->assoc_rsnxe) |
| return -1; |
| |
| sm->assoc_rsnxe_len = *rsnxe_len; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_sm_set_assoc_rsnxe - Set own RSNXE from (Re)AssocReq |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @ie: Pointer to IE data (starting from id) |
| * @len: IE length |
| * Returns: 0 on success, -1 on failure |
| * |
| * Inform WPA state machine about the RSNXE used in (Re)Association Request |
| * frame. The IE will be used to override the default value generated |
| * with wpa_sm_set_assoc_rsnxe_default(). |
| */ |
| int wpa_sm_set_assoc_rsnxe(struct wpa_sm *sm, const u8 *ie, size_t len) |
| { |
| if (!sm) |
| return -1; |
| |
| os_free(sm->assoc_rsnxe); |
| if (!ie || len == 0) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "RSN: clearing own RSNXE"); |
| sm->assoc_rsnxe = NULL; |
| sm->assoc_rsnxe_len = 0; |
| } else { |
| wpa_hexdump(MSG_DEBUG, "RSN: set own RSNXE", ie, len); |
| sm->assoc_rsnxe = os_memdup(ie, len); |
| if (!sm->assoc_rsnxe) |
| return -1; |
| |
| sm->assoc_rsnxe_len = len; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_sm_set_ap_wpa_ie - Set AP WPA IE from Beacon/ProbeResp |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @ie: Pointer to IE data (starting from id) |
| * @len: IE length |
| * Returns: 0 on success, -1 on failure |
| * |
| * Inform WPA state machine about the WPA IE used in Beacon / Probe Response |
| * frame. |
| */ |
| int wpa_sm_set_ap_wpa_ie(struct wpa_sm *sm, const u8 *ie, size_t len) |
| { |
| if (sm == NULL) |
| return -1; |
| |
| os_free(sm->ap_wpa_ie); |
| if (ie == NULL || len == 0) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: clearing AP WPA IE"); |
| sm->ap_wpa_ie = NULL; |
| sm->ap_wpa_ie_len = 0; |
| } else { |
| wpa_hexdump(MSG_DEBUG, "WPA: set AP WPA IE", ie, len); |
| sm->ap_wpa_ie = os_memdup(ie, len); |
| if (sm->ap_wpa_ie == NULL) |
| return -1; |
| |
| sm->ap_wpa_ie_len = len; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_sm_set_ap_rsn_ie - Set AP RSN IE from Beacon/ProbeResp |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @ie: Pointer to IE data (starting from id) |
| * @len: IE length |
| * Returns: 0 on success, -1 on failure |
| * |
| * Inform WPA state machine about the RSN IE used in Beacon / Probe Response |
| * frame. |
| */ |
| int wpa_sm_set_ap_rsn_ie(struct wpa_sm *sm, const u8 *ie, size_t len) |
| { |
| if (sm == NULL) |
| return -1; |
| |
| os_free(sm->ap_rsn_ie); |
| if (ie == NULL || len == 0) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: clearing AP RSN IE"); |
| sm->ap_rsn_ie = NULL; |
| sm->ap_rsn_ie_len = 0; |
| } else { |
| wpa_hexdump(MSG_DEBUG, "WPA: set AP RSN IE", ie, len); |
| sm->ap_rsn_ie = os_memdup(ie, len); |
| if (sm->ap_rsn_ie == NULL) |
| return -1; |
| |
| sm->ap_rsn_ie_len = len; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_sm_set_ap_rsnxe - Set AP RSNXE from Beacon/ProbeResp |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @ie: Pointer to IE data (starting from id) |
| * @len: IE length |
| * Returns: 0 on success, -1 on failure |
| * |
| * Inform WPA state machine about the RSNXE used in Beacon / Probe Response |
| * frame. |
| */ |
| int wpa_sm_set_ap_rsnxe(struct wpa_sm *sm, const u8 *ie, size_t len) |
| { |
| if (!sm) |
| return -1; |
| |
| os_free(sm->ap_rsnxe); |
| if (!ie || len == 0) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: clearing AP RSNXE"); |
| sm->ap_rsnxe = NULL; |
| sm->ap_rsnxe_len = 0; |
| } else { |
| wpa_hexdump(MSG_DEBUG, "WPA: set AP RSNXE", ie, len); |
| sm->ap_rsnxe = os_memdup(ie, len); |
| if (!sm->ap_rsnxe) |
| return -1; |
| |
| sm->ap_rsnxe_len = len; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_sm_parse_own_wpa_ie - Parse own WPA/RSN IE |
| * @sm: Pointer to WPA state machine data from wpa_sm_init() |
| * @data: Pointer to data area for parsing results |
| * Returns: 0 on success, -1 if IE is not known, or -2 on parsing failure |
| * |
| * Parse the contents of the own WPA or RSN IE from (Re)AssocReq and write the |
| * parsed data into data. |
| */ |
| int wpa_sm_parse_own_wpa_ie(struct wpa_sm *sm, struct wpa_ie_data *data) |
| { |
| if (sm == NULL) |
| return -1; |
| |
| if (sm->assoc_wpa_ie == NULL) { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: No WPA/RSN IE available from association info"); |
| return -1; |
| } |
| if (wpa_parse_wpa_ie(sm->assoc_wpa_ie, sm->assoc_wpa_ie_len, data)) |
| return -2; |
| return 0; |
| } |
| |
| |
| int wpa_sm_pmksa_cache_list(struct wpa_sm *sm, char *buf, size_t len) |
| { |
| return pmksa_cache_list(sm->pmksa, buf, len); |
| } |
| |
| |
| struct rsn_pmksa_cache_entry * wpa_sm_pmksa_cache_head(struct wpa_sm *sm) |
| { |
| return pmksa_cache_head(sm->pmksa); |
| } |
| |
| |
| struct rsn_pmksa_cache_entry * |
| wpa_sm_pmksa_cache_add_entry(struct wpa_sm *sm, |
| struct rsn_pmksa_cache_entry * entry) |
| { |
| return pmksa_cache_add_entry(sm->pmksa, entry); |
| } |
| |
| |
| void wpa_sm_pmksa_cache_add(struct wpa_sm *sm, const u8 *pmk, size_t pmk_len, |
| const u8 *pmkid, const u8 *bssid, |
| const u8 *fils_cache_id) |
| { |
| sm->cur_pmksa = pmksa_cache_add(sm->pmksa, pmk, pmk_len, pmkid, NULL, 0, |
| bssid, sm->own_addr, sm->network_ctx, |
| sm->key_mgmt, fils_cache_id); |
| } |
| |
| |
| int wpa_sm_pmksa_exists(struct wpa_sm *sm, const u8 *bssid, |
| const void *network_ctx) |
| { |
| return pmksa_cache_get(sm->pmksa, bssid, NULL, network_ctx, 0) != NULL; |
| } |
| |
| |
| struct rsn_pmksa_cache_entry * wpa_sm_pmksa_cache_get(struct wpa_sm *sm, |
| const u8 *aa, |
| const u8 *pmkid, |
| const void *network_ctx, |
| int akmp) |
| { |
| return pmksa_cache_get(sm->pmksa, aa, pmkid, network_ctx, akmp); |
| } |
| |
| |
| void wpa_sm_drop_sa(struct wpa_sm *sm) |
| { |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: Clear old PMK and PTK"); |
| sm->ptk_set = 0; |
| sm->tptk_set = 0; |
| sm->pmk_len = 0; |
| os_memset(sm->pmk, 0, sizeof(sm->pmk)); |
| os_memset(&sm->ptk, 0, sizeof(sm->ptk)); |
| os_memset(&sm->tptk, 0, sizeof(sm->tptk)); |
| os_memset(&sm->gtk, 0, sizeof(sm->gtk)); |
| os_memset(&sm->gtk_wnm_sleep, 0, sizeof(sm->gtk_wnm_sleep)); |
| os_memset(&sm->igtk, 0, sizeof(sm->igtk)); |
| os_memset(&sm->igtk_wnm_sleep, 0, sizeof(sm->igtk_wnm_sleep)); |
| #ifdef CONFIG_IEEE80211R |
| os_memset(sm->xxkey, 0, sizeof(sm->xxkey)); |
| sm->xxkey_len = 0; |
| os_memset(sm->pmk_r0, 0, sizeof(sm->pmk_r0)); |
| sm->pmk_r0_len = 0; |
| os_memset(sm->pmk_r1, 0, sizeof(sm->pmk_r1)); |
| sm->pmk_r1_len = 0; |
| #ifdef CONFIG_PASN |
| os_free(sm->pasn_r1kh); |
| sm->pasn_r1kh = NULL; |
| sm->n_pasn_r1kh = 0; |
| #endif /* CONFIG_PASN */ |
| #endif /* CONFIG_IEEE80211R */ |
| } |
| |
| |
| int wpa_sm_has_ptk(struct wpa_sm *sm) |
| { |
| if (sm == NULL) |
| return 0; |
| return sm->ptk_set; |
| } |
| |
| |
| int wpa_sm_has_ptk_installed(struct wpa_sm *sm) |
| { |
| if (!sm) |
| return 0; |
| return sm->ptk.installed; |
| } |
| |
| |
| void wpa_sm_update_replay_ctr(struct wpa_sm *sm, const u8 *replay_ctr) |
| { |
| os_memcpy(sm->rx_replay_counter, replay_ctr, WPA_REPLAY_COUNTER_LEN); |
| } |
| |
| |
| void wpa_sm_pmksa_cache_flush(struct wpa_sm *sm, void *network_ctx) |
| { |
| pmksa_cache_flush(sm->pmksa, network_ctx, NULL, 0, false); |
| } |
| |
| |
| void wpa_sm_external_pmksa_cache_flush(struct wpa_sm *sm, void *network_ctx) |
| { |
| pmksa_cache_flush(sm->pmksa, network_ctx, NULL, 0, true); |
| } |
| |
| #if defined(CONFIG_DRIVER_NL80211_BRCM) || defined(CONFIG_DRIVER_NL80211_SYNA) |
| void wpa_sm_install_pmk(struct wpa_sm *sm) |
| { |
| /* In case the driver wants to handle re-assocs, pass it down the PMK. */ |
| if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->pairwise_cipher), NULL, 0, 0, NULL, 0, |
| (u8*)sm->pmk, sm->pmk_len, KEY_FLAG_PMK) < 0) { |
| wpa_hexdump(MSG_DEBUG, "PSK: Install PMK to the driver for driver reassociations", |
| (u8*)sm->pmk, sm->pmk_len); |
| /* No harm if the driver doesn't support. */ |
| wpa_msg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: Failed to set PMK to the driver"); |
| } |
| } |
| |
| void wpa_sm_notify_brcm_ft_reassoc(struct wpa_sm *sm, const u8 *bssid) |
| { |
| u8 buf[256]; |
| struct wpa_supplicant *wpa_s = sm->ctx->ctx; |
| |
| wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, |
| "WPA: BRCM FT Reassociation event - clear replay counter"); |
| os_memcpy(sm->bssid, bssid, ETH_ALEN); |
| os_memset(sm->rx_replay_counter, 0, WPA_REPLAY_COUNTER_LEN); |
| sm->rx_replay_counter_set = 0; |
| |
| if (wpa_drv_driver_cmd(wpa_s, "GET_FTKEY", (char *)buf, sizeof(buf)) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_ERROR, |
| "WPA: Failed to get FT KEY information"); |
| wpa_supplicant_deauthenticate( |
| wpa_s, WLAN_REASON_DEAUTH_LEAVING); |
| |
| } else { |
| /* update kck and kek */ |
| os_memcpy(sm->ptk.kck, buf, 16); |
| os_memcpy(sm->ptk.kek, buf + 16, 16); |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "WPA: Updated KCK and KEK after FT reassoc"); |
| } |
| } |
| #endif /* CONFIG_DRIVER_NL80211_BRCM || CONFIG_DRIVER_NL80211_SYNA */ |
| |
| |
| #ifdef CONFIG_WNM |
| int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf) |
| { |
| u16 keyinfo; |
| u8 keylen; /* plaintext key len */ |
| u8 *key_rsc; |
| |
| if (subelem_id == WNM_SLEEP_SUBELEM_GTK) { |
| struct wpa_gtk_data gd; |
| |
| os_memset(&gd, 0, sizeof(gd)); |
| keylen = wpa_cipher_key_len(sm->group_cipher); |
| gd.key_rsc_len = wpa_cipher_rsc_len(sm->group_cipher); |
| gd.alg = wpa_cipher_to_alg(sm->group_cipher); |
| if (gd.alg == WPA_ALG_NONE) { |
| wpa_printf(MSG_DEBUG, "Unsupported group cipher suite"); |
| return -1; |
| } |
| |
| key_rsc = buf + 5; |
| keyinfo = WPA_GET_LE16(buf + 2); |
| gd.gtk_len = keylen; |
| if (gd.gtk_len != buf[4]) { |
| wpa_printf(MSG_DEBUG, "GTK len mismatch len %d vs %d", |
| gd.gtk_len, buf[4]); |
| return -1; |
| } |
| gd.keyidx = keyinfo & 0x03; /* B0 - B1 */ |
| gd.tx = wpa_supplicant_gtk_tx_bit_workaround( |
| sm, !!(keyinfo & WPA_KEY_INFO_TXRX)); |
| |
| os_memcpy(gd.gtk, buf + 13, gd.gtk_len); |
| |
| wpa_hexdump_key(MSG_DEBUG, "Install GTK (WNM SLEEP)", |
| gd.gtk, gd.gtk_len); |
| if (wpa_supplicant_install_gtk(sm, &gd, key_rsc, 1)) { |
| forced_memzero(&gd, sizeof(gd)); |
| wpa_printf(MSG_DEBUG, "Failed to install the GTK in " |
| "WNM mode"); |
| return -1; |
| } |
| forced_memzero(&gd, sizeof(gd)); |
| } else if (subelem_id == WNM_SLEEP_SUBELEM_IGTK) { |
| const struct wpa_igtk_kde *igtk; |
| |
| igtk = (const struct wpa_igtk_kde *) (buf + 2); |
| if (wpa_supplicant_install_igtk(sm, igtk, 1) < 0) |
| return -1; |
| } else if (subelem_id == WNM_SLEEP_SUBELEM_BIGTK) { |
| const struct wpa_bigtk_kde *bigtk; |
| |
| bigtk = (const struct wpa_bigtk_kde *) (buf + 2); |
| if (sm->beacon_prot && |
| wpa_supplicant_install_bigtk(sm, bigtk, 1) < 0) |
| return -1; |
| } else { |
| wpa_printf(MSG_DEBUG, "Unknown element id"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_WNM */ |
| |
| |
| #ifdef CONFIG_P2P |
| |
| int wpa_sm_get_p2p_ip_addr(struct wpa_sm *sm, u8 *buf) |
| { |
| if (sm == NULL || WPA_GET_BE32(sm->p2p_ip_addr) == 0) |
| return -1; |
| os_memcpy(buf, sm->p2p_ip_addr, 3 * 4); |
| return 0; |
| } |
| |
| #endif /* CONFIG_P2P */ |
| |
| |
| void wpa_sm_set_rx_replay_ctr(struct wpa_sm *sm, const u8 *rx_replay_counter) |
| { |
| if (rx_replay_counter == NULL) |
| return; |
| |
| os_memcpy(sm->rx_replay_counter, rx_replay_counter, |
| WPA_REPLAY_COUNTER_LEN); |
| sm->rx_replay_counter_set = 1; |
| wpa_printf(MSG_DEBUG, "Updated key replay counter"); |
| } |
| |
| |
| void wpa_sm_set_ptk_kck_kek(struct wpa_sm *sm, |
| const u8 *ptk_kck, size_t ptk_kck_len, |
| const u8 *ptk_kek, size_t ptk_kek_len) |
| { |
| if (ptk_kck && ptk_kck_len <= WPA_KCK_MAX_LEN) { |
| os_memcpy(sm->ptk.kck, ptk_kck, ptk_kck_len); |
| sm->ptk.kck_len = ptk_kck_len; |
| wpa_printf(MSG_DEBUG, "Updated PTK KCK"); |
| } |
| if (ptk_kek && ptk_kek_len <= WPA_KEK_MAX_LEN) { |
| os_memcpy(sm->ptk.kek, ptk_kek, ptk_kek_len); |
| sm->ptk.kek_len = ptk_kek_len; |
| wpa_printf(MSG_DEBUG, "Updated PTK KEK"); |
| } |
| sm->ptk_set = 1; |
| } |
| |
| |
| #ifdef CONFIG_TESTING_OPTIONS |
| |
| void wpa_sm_set_test_assoc_ie(struct wpa_sm *sm, struct wpabuf *buf) |
| { |
| wpabuf_free(sm->test_assoc_ie); |
| sm->test_assoc_ie = buf; |
| } |
| |
| |
| const u8 * wpa_sm_get_anonce(struct wpa_sm *sm) |
| { |
| return sm->anonce; |
| } |
| |
| #endif /* CONFIG_TESTING_OPTIONS */ |
| |
| |
| unsigned int wpa_sm_get_key_mgmt(struct wpa_sm *sm) |
| { |
| return sm->key_mgmt; |
| } |
| |
| |
| #ifdef CONFIG_FILS |
| |
| struct wpabuf * fils_build_auth(struct wpa_sm *sm, int dh_group, const u8 *md) |
| { |
| struct wpabuf *buf = NULL; |
| struct wpabuf *erp_msg; |
| struct wpabuf *pub = NULL; |
| |
| erp_msg = eapol_sm_build_erp_reauth_start(sm->eapol); |
| if (!erp_msg && !sm->cur_pmksa) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: Neither ERP EAP-Initiate/Re-auth nor PMKSA cache entry is available - skip FILS"); |
| goto fail; |
| } |
| |
| wpa_printf(MSG_DEBUG, "FILS: Try to use FILS (erp=%d pmksa_cache=%d)", |
| erp_msg != NULL, sm->cur_pmksa != NULL); |
| |
| sm->fils_completed = 0; |
| |
| if (!sm->assoc_wpa_ie) { |
| wpa_printf(MSG_INFO, "FILS: No own RSN IE set for FILS"); |
| goto fail; |
| } |
| |
| if (random_get_bytes(sm->fils_nonce, FILS_NONCE_LEN) < 0 || |
| random_get_bytes(sm->fils_session, FILS_SESSION_LEN) < 0) |
| goto fail; |
| |
| wpa_hexdump(MSG_DEBUG, "FILS: Generated FILS Nonce", |
| sm->fils_nonce, FILS_NONCE_LEN); |
| wpa_hexdump(MSG_DEBUG, "FILS: Generated FILS Session", |
| sm->fils_session, FILS_SESSION_LEN); |
| |
| #ifdef CONFIG_FILS_SK_PFS |
| sm->fils_dh_group = dh_group; |
| if (dh_group) { |
| crypto_ecdh_deinit(sm->fils_ecdh); |
| sm->fils_ecdh = crypto_ecdh_init(dh_group); |
| if (!sm->fils_ecdh) { |
| wpa_printf(MSG_INFO, |
| "FILS: Could not initialize ECDH with group %d", |
| dh_group); |
| goto fail; |
| } |
| pub = crypto_ecdh_get_pubkey(sm->fils_ecdh, 1); |
| if (!pub) |
| goto fail; |
| wpa_hexdump_buf(MSG_DEBUG, "FILS: Element (DH public key)", |
| pub); |
| sm->fils_dh_elem_len = wpabuf_len(pub); |
| } |
| #endif /* CONFIG_FILS_SK_PFS */ |
| |
| buf = wpabuf_alloc(1000 + sm->assoc_wpa_ie_len + |
| (pub ? wpabuf_len(pub) : 0)); |
| if (!buf) |
| goto fail; |
| |
| /* Fields following the Authentication algorithm number field */ |
| |
| /* Authentication Transaction seq# */ |
| wpabuf_put_le16(buf, 1); |
| |
| /* Status Code */ |
| wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS); |
| |
| /* TODO: FILS PK */ |
| #ifdef CONFIG_FILS_SK_PFS |
| if (dh_group) { |
| /* Finite Cyclic Group */ |
| wpabuf_put_le16(buf, dh_group); |
| /* Element */ |
| wpabuf_put_buf(buf, pub); |
| } |
| #endif /* CONFIG_FILS_SK_PFS */ |
| |
| /* RSNE */ |
| wpa_hexdump(MSG_DEBUG, "FILS: RSNE in FILS Authentication frame", |
| sm->assoc_wpa_ie, sm->assoc_wpa_ie_len); |
| wpabuf_put_data(buf, sm->assoc_wpa_ie, sm->assoc_wpa_ie_len); |
| |
| if (md) { |
| /* MDE when using FILS for FT initial association */ |
| struct rsn_mdie *mdie; |
| |
| wpabuf_put_u8(buf, WLAN_EID_MOBILITY_DOMAIN); |
| wpabuf_put_u8(buf, sizeof(*mdie)); |
| mdie = wpabuf_put(buf, sizeof(*mdie)); |
| os_memcpy(mdie->mobility_domain, md, MOBILITY_DOMAIN_ID_LEN); |
| mdie->ft_capab = 0; |
| } |
| |
| /* FILS Nonce */ |
| wpabuf_put_u8(buf, WLAN_EID_EXTENSION); /* Element ID */ |
| wpabuf_put_u8(buf, 1 + FILS_NONCE_LEN); /* Length */ |
| /* Element ID Extension */ |
| wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_NONCE); |
| wpabuf_put_data(buf, sm->fils_nonce, FILS_NONCE_LEN); |
| |
| /* FILS Session */ |
| wpabuf_put_u8(buf, WLAN_EID_EXTENSION); /* Element ID */ |
| wpabuf_put_u8(buf, 1 + FILS_SESSION_LEN); /* Length */ |
| /* Element ID Extension */ |
| wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_SESSION); |
| wpabuf_put_data(buf, sm->fils_session, FILS_SESSION_LEN); |
| |
| /* Wrapped Data */ |
| sm->fils_erp_pmkid_set = 0; |
| if (erp_msg) { |
| wpabuf_put_u8(buf, WLAN_EID_EXTENSION); /* Element ID */ |
| wpabuf_put_u8(buf, 1 + wpabuf_len(erp_msg)); /* Length */ |
| /* Element ID Extension */ |
| wpabuf_put_u8(buf, WLAN_EID_EXT_WRAPPED_DATA); |
| wpabuf_put_buf(buf, erp_msg); |
| /* Calculate pending PMKID here so that we do not need to |
| * maintain a copy of the EAP-Initiate/Reauth message. */ |
| if (fils_pmkid_erp(sm->key_mgmt, wpabuf_head(erp_msg), |
| wpabuf_len(erp_msg), |
| sm->fils_erp_pmkid) == 0) |
| sm->fils_erp_pmkid_set = 1; |
| } |
| |
| wpa_hexdump_buf(MSG_DEBUG, "RSN: FILS fields for Authentication frame", |
| buf); |
| |
| fail: |
| wpabuf_free(erp_msg); |
| wpabuf_free(pub); |
| return buf; |
| } |
| |
| |
| int fils_process_auth(struct wpa_sm *sm, const u8 *bssid, const u8 *data, |
| size_t len) |
| { |
| const u8 *pos, *end; |
| struct ieee802_11_elems elems; |
| struct wpa_ie_data rsn; |
| int pmkid_match = 0; |
| u8 ick[FILS_ICK_MAX_LEN]; |
| size_t ick_len; |
| int res; |
| struct wpabuf *dh_ss = NULL; |
| const u8 *g_sta = NULL; |
| size_t g_sta_len = 0; |
| const u8 *g_ap = NULL; |
| size_t g_ap_len = 0, kdk_len; |
| struct wpabuf *pub = NULL; |
| |
| os_memcpy(sm->bssid, bssid, ETH_ALEN); |
| |
| wpa_hexdump(MSG_DEBUG, "FILS: Authentication frame fields", |
| data, len); |
| pos = data; |
| end = data + len; |
| |
| /* TODO: FILS PK */ |
| #ifdef CONFIG_FILS_SK_PFS |
| if (sm->fils_dh_group) { |
| u16 group; |
| |
| /* Using FILS PFS */ |
| |
| /* Finite Cyclic Group */ |
| if (end - pos < 2) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: No room for Finite Cyclic Group"); |
| goto fail; |
| } |
| group = WPA_GET_LE16(pos); |
| pos += 2; |
| if (group != sm->fils_dh_group) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: Unexpected change in Finite Cyclic Group: %u (expected %u)", |
| group, sm->fils_dh_group); |
| goto fail; |
| } |
| |
| /* Element */ |
| if ((size_t) (end - pos) < sm->fils_dh_elem_len) { |
| wpa_printf(MSG_DEBUG, "FILS: No room for Element"); |
| goto fail; |
| } |
| |
| if (!sm->fils_ecdh) { |
| wpa_printf(MSG_DEBUG, "FILS: No ECDH state available"); |
| goto fail; |
| } |
| dh_ss = crypto_ecdh_set_peerkey(sm->fils_ecdh, 1, pos, |
| sm->fils_dh_elem_len); |
| if (!dh_ss) { |
| wpa_printf(MSG_DEBUG, "FILS: ECDH operation failed"); |
| goto fail; |
| } |
| wpa_hexdump_buf_key(MSG_DEBUG, "FILS: DH_SS", dh_ss); |
| g_ap = pos; |
| g_ap_len = sm->fils_dh_elem_len; |
| pos += sm->fils_dh_elem_len; |
| } |
| #endif /* CONFIG_FILS_SK_PFS */ |
| |
| wpa_hexdump(MSG_DEBUG, "FILS: Remaining IEs", pos, end - pos); |
| if (ieee802_11_parse_elems(pos, end - pos, &elems, 1) == ParseFailed) { |
| wpa_printf(MSG_DEBUG, "FILS: Could not parse elements"); |
| goto fail; |
| } |
| |
| /* RSNE */ |
| wpa_hexdump(MSG_DEBUG, "FILS: RSN element", elems.rsn_ie, |
| elems.rsn_ie_len); |
| if (!elems.rsn_ie || |
| wpa_parse_wpa_ie_rsn(elems.rsn_ie - 2, elems.rsn_ie_len + 2, |
| &rsn) < 0) { |
| wpa_printf(MSG_DEBUG, "FILS: No RSN element"); |
| goto fail; |
| } |
| |
| if (!elems.fils_nonce) { |
| wpa_printf(MSG_DEBUG, "FILS: No FILS Nonce field"); |
| goto fail; |
| } |
| os_memcpy(sm->fils_anonce, elems.fils_nonce, FILS_NONCE_LEN); |
| wpa_hexdump(MSG_DEBUG, "FILS: ANonce", sm->fils_anonce, FILS_NONCE_LEN); |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_key_mgmt_ft(sm->key_mgmt)) { |
| struct wpa_ft_ies parse; |
| |
| if (!elems.mdie || !elems.ftie) { |
| wpa_printf(MSG_DEBUG, "FILS+FT: No MDE or FTE"); |
| goto fail; |
| } |
| |
| if (wpa_ft_parse_ies(pos, end - pos, &parse, |
| wpa_key_mgmt_sha384(sm->key_mgmt)) < 0) { |
| wpa_printf(MSG_DEBUG, "FILS+FT: Failed to parse IEs"); |
| goto fail; |
| } |
| |
| if (!parse.r0kh_id) { |
| wpa_printf(MSG_DEBUG, |
| "FILS+FT: No R0KH-ID subelem in FTE"); |
| goto fail; |
| } |
| os_memcpy(sm->r0kh_id, parse.r0kh_id, parse.r0kh_id_len); |
| sm->r0kh_id_len = parse.r0kh_id_len; |
| wpa_hexdump_ascii(MSG_DEBUG, "FILS+FT: R0KH-ID", |
| sm->r0kh_id, sm->r0kh_id_len); |
| |
| if (!parse.r1kh_id) { |
| wpa_printf(MSG_DEBUG, |
| "FILS+FT: No R1KH-ID subelem in FTE"); |
| goto fail; |
| } |
| os_memcpy(sm->r1kh_id, parse.r1kh_id, FT_R1KH_ID_LEN); |
| wpa_hexdump(MSG_DEBUG, "FILS+FT: R1KH-ID", |
| sm->r1kh_id, FT_R1KH_ID_LEN); |
| |
| /* TODO: Check MDE and FTE payload */ |
| |
| wpabuf_free(sm->fils_ft_ies); |
| sm->fils_ft_ies = wpabuf_alloc(2 + elems.mdie_len + |
| 2 + elems.ftie_len); |
| if (!sm->fils_ft_ies) |
| goto fail; |
| wpabuf_put_data(sm->fils_ft_ies, elems.mdie - 2, |
| 2 + elems.mdie_len); |
| wpabuf_put_data(sm->fils_ft_ies, elems.ftie - 2, |
| 2 + elems.ftie_len); |
| } else { |
| wpabuf_free(sm->fils_ft_ies); |
| sm->fils_ft_ies = NULL; |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| |
| /* PMKID List */ |
| if (rsn.pmkid && rsn.num_pmkid > 0) { |
| wpa_hexdump(MSG_DEBUG, "FILS: PMKID List", |
| rsn.pmkid, rsn.num_pmkid * PMKID_LEN); |
| |
| if (rsn.num_pmkid != 1) { |
| wpa_printf(MSG_DEBUG, "FILS: Invalid PMKID selection"); |
| goto fail; |
| } |
| wpa_hexdump(MSG_DEBUG, "FILS: PMKID", rsn.pmkid, PMKID_LEN); |
| if (os_memcmp(sm->cur_pmksa->pmkid, rsn.pmkid, PMKID_LEN) != 0) |
| { |
| wpa_printf(MSG_DEBUG, "FILS: PMKID mismatch"); |
| wpa_hexdump(MSG_DEBUG, "FILS: Expected PMKID", |
| sm->cur_pmksa->pmkid, PMKID_LEN); |
| goto fail; |
| } |
| wpa_printf(MSG_DEBUG, |
| "FILS: Matching PMKID - continue using PMKSA caching"); |
| pmkid_match = 1; |
| } |
| if (!pmkid_match && sm->cur_pmksa) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: No PMKID match - cannot use cached PMKSA entry"); |
| sm->cur_pmksa = NULL; |
| } |
| |
| /* FILS Session */ |
| if (!elems.fils_session) { |
| wpa_printf(MSG_DEBUG, "FILS: No FILS Session element"); |
| goto fail; |
| } |
| wpa_hexdump(MSG_DEBUG, "FILS: FILS Session", elems.fils_session, |
| FILS_SESSION_LEN); |
| if (os_memcmp(sm->fils_session, elems.fils_session, FILS_SESSION_LEN) |
| != 0) { |
| wpa_printf(MSG_DEBUG, "FILS: Session mismatch"); |
| wpa_hexdump(MSG_DEBUG, "FILS: Expected FILS Session", |
| sm->fils_session, FILS_SESSION_LEN); |
| goto fail; |
| } |
| |
| /* Wrapped Data */ |
| if (!sm->cur_pmksa && elems.wrapped_data) { |
| u8 rmsk[ERP_MAX_KEY_LEN]; |
| size_t rmsk_len; |
| |
| wpa_hexdump(MSG_DEBUG, "FILS: Wrapped Data", |
| elems.wrapped_data, |
| elems.wrapped_data_len); |
| eapol_sm_process_erp_finish(sm->eapol, elems.wrapped_data, |
| elems.wrapped_data_len); |
| if (eapol_sm_failed(sm->eapol)) |
| goto fail; |
| |
| rmsk_len = ERP_MAX_KEY_LEN; |
| res = eapol_sm_get_key(sm->eapol, rmsk, rmsk_len); |
| if (res == PMK_LEN) { |
| rmsk_len = PMK_LEN; |
| res = eapol_sm_get_key(sm->eapol, rmsk, rmsk_len); |
| } |
| if (res) |
| goto fail; |
| |
| res = fils_rmsk_to_pmk(sm->key_mgmt, rmsk, rmsk_len, |
| sm->fils_nonce, sm->fils_anonce, |
| dh_ss ? wpabuf_head(dh_ss) : NULL, |
| dh_ss ? wpabuf_len(dh_ss) : 0, |
| sm->pmk, &sm->pmk_len); |
| forced_memzero(rmsk, sizeof(rmsk)); |
| |
| /* Don't use DHss in PTK derivation if PMKSA caching is not |
| * used. */ |
| wpabuf_clear_free(dh_ss); |
| dh_ss = NULL; |
| |
| if (res) |
| goto fail; |
| |
| if (!sm->fils_erp_pmkid_set) { |
| wpa_printf(MSG_DEBUG, "FILS: PMKID not available"); |
| goto fail; |
| } |
| wpa_hexdump(MSG_DEBUG, "FILS: PMKID", sm->fils_erp_pmkid, |
| PMKID_LEN); |
| wpa_printf(MSG_DEBUG, "FILS: ERP processing succeeded - add PMKSA cache entry for the result"); |
| sm->cur_pmksa = pmksa_cache_add(sm->pmksa, sm->pmk, sm->pmk_len, |
| sm->fils_erp_pmkid, NULL, 0, |
| sm->bssid, sm->own_addr, |
| sm->network_ctx, sm->key_mgmt, |
| NULL); |
| } |
| |
| if (!sm->cur_pmksa) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: No remaining options to continue FILS authentication"); |
| goto fail; |
| } |
| |
| if (sm->force_kdk_derivation || |
| (sm->secure_ltf && |
| ieee802_11_rsnx_capab(sm->ap_rsnxe, WLAN_RSNX_CAPAB_SECURE_LTF))) |
| kdk_len = WPA_KDK_MAX_LEN; |
| else |
| kdk_len = 0; |
| |
| if (fils_pmk_to_ptk(sm->pmk, sm->pmk_len, sm->own_addr, sm->bssid, |
| sm->fils_nonce, sm->fils_anonce, |
| dh_ss ? wpabuf_head(dh_ss) : NULL, |
| dh_ss ? wpabuf_len(dh_ss) : 0, |
| &sm->ptk, ick, &ick_len, |
| sm->key_mgmt, sm->pairwise_cipher, |
| sm->fils_ft, &sm->fils_ft_len, |
| kdk_len) < 0) { |
| wpa_printf(MSG_DEBUG, "FILS: Failed to derive PTK"); |
| goto fail; |
| } |
| |
| wpabuf_clear_free(dh_ss); |
| dh_ss = NULL; |
| |
| sm->ptk_set = 1; |
| sm->tptk_set = 0; |
| os_memset(&sm->tptk, 0, sizeof(sm->tptk)); |
| |
| #ifdef CONFIG_FILS_SK_PFS |
| if (sm->fils_dh_group) { |
| if (!sm->fils_ecdh) { |
| wpa_printf(MSG_INFO, "FILS: ECDH not initialized"); |
| goto fail; |
| } |
| pub = crypto_ecdh_get_pubkey(sm->fils_ecdh, 1); |
| if (!pub) |
| goto fail; |
| wpa_hexdump_buf(MSG_DEBUG, "FILS: gSTA", pub); |
| g_sta = wpabuf_head(pub); |
| g_sta_len = wpabuf_len(pub); |
| if (!g_ap) { |
| wpa_printf(MSG_INFO, "FILS: gAP not available"); |
| goto fail; |
| } |
| wpa_hexdump(MSG_DEBUG, "FILS: gAP", g_ap, g_ap_len); |
| } |
| #endif /* CONFIG_FILS_SK_PFS */ |
| |
| res = fils_key_auth_sk(ick, ick_len, sm->fils_nonce, |
| sm->fils_anonce, sm->own_addr, sm->bssid, |
| g_sta, g_sta_len, g_ap, g_ap_len, |
| sm->key_mgmt, sm->fils_key_auth_sta, |
| sm->fils_key_auth_ap, |
| &sm->fils_key_auth_len); |
| wpabuf_free(pub); |
| forced_memzero(ick, sizeof(ick)); |
| return res; |
| fail: |
| wpabuf_free(pub); |
| wpabuf_clear_free(dh_ss); |
| return -1; |
| } |
| |
| |
| #ifdef CONFIG_IEEE80211R |
| static int fils_ft_build_assoc_req_rsne(struct wpa_sm *sm, struct wpabuf *buf) |
| { |
| struct rsn_ie_hdr *rsnie; |
| u16 capab; |
| u8 *pos; |
| int use_sha384 = wpa_key_mgmt_sha384(sm->key_mgmt); |
| |
| /* RSNIE[PMKR0Name/PMKR1Name] */ |
| rsnie = wpabuf_put(buf, sizeof(*rsnie)); |
| rsnie->elem_id = WLAN_EID_RSN; |
| WPA_PUT_LE16(rsnie->version, RSN_VERSION); |
| |
| /* Group Suite Selector */ |
| if (!wpa_cipher_valid_group(sm->group_cipher)) { |
| wpa_printf(MSG_WARNING, "FT: Invalid group cipher (%d)", |
| sm->group_cipher); |
| return -1; |
| } |
| pos = wpabuf_put(buf, RSN_SELECTOR_LEN); |
| RSN_SELECTOR_PUT(pos, wpa_cipher_to_suite(WPA_PROTO_RSN, |
| sm->group_cipher)); |
| |
| /* Pairwise Suite Count */ |
| wpabuf_put_le16(buf, 1); |
| |
| /* Pairwise Suite List */ |
| if (!wpa_cipher_valid_pairwise(sm->pairwise_cipher)) { |
| wpa_printf(MSG_WARNING, "FT: Invalid pairwise cipher (%d)", |
| sm->pairwise_cipher); |
| return -1; |
| } |
| pos = wpabuf_put(buf, RSN_SELECTOR_LEN); |
| RSN_SELECTOR_PUT(pos, wpa_cipher_to_suite(WPA_PROTO_RSN, |
| sm->pairwise_cipher)); |
| |
| /* Authenticated Key Management Suite Count */ |
| wpabuf_put_le16(buf, 1); |
| |
| /* Authenticated Key Management Suite List */ |
| pos = wpabuf_put(buf, RSN_SELECTOR_LEN); |
| if (sm->key_mgmt == WPA_KEY_MGMT_FT_FILS_SHA256) |
| RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_FT_FILS_SHA256); |
| else if (sm->key_mgmt == WPA_KEY_MGMT_FT_FILS_SHA384) |
| RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_FT_FILS_SHA384); |
| else { |
| wpa_printf(MSG_WARNING, |
| "FILS+FT: Invalid key management type (%d)", |
| sm->key_mgmt); |
| return -1; |
| } |
| |
| /* RSN Capabilities */ |
| capab = 0; |
| if (sm->mfp) |
| capab |= WPA_CAPABILITY_MFPC; |
| if (sm->mfp == 2) |
| capab |= WPA_CAPABILITY_MFPR; |
| if (sm->ocv) |
| capab |= WPA_CAPABILITY_OCVC; |
| if (sm->ext_key_id) |
| capab |= WPA_CAPABILITY_EXT_KEY_ID_FOR_UNICAST; |
| wpabuf_put_le16(buf, capab); |
| |
| /* PMKID Count */ |
| wpabuf_put_le16(buf, 1); |
| |
| /* PMKID List [PMKR1Name] */ |
| wpa_hexdump_key(MSG_DEBUG, "FILS+FT: XXKey (FILS-FT)", |
| sm->fils_ft, sm->fils_ft_len); |
| wpa_hexdump_ascii(MSG_DEBUG, "FILS+FT: SSID", sm->ssid, sm->ssid_len); |
| wpa_hexdump(MSG_DEBUG, "FILS+FT: MDID", |
| sm->mobility_domain, MOBILITY_DOMAIN_ID_LEN); |
| wpa_hexdump_ascii(MSG_DEBUG, "FILS+FT: R0KH-ID", |
| sm->r0kh_id, sm->r0kh_id_len); |
| if (wpa_derive_pmk_r0(sm->fils_ft, sm->fils_ft_len, sm->ssid, |
| sm->ssid_len, sm->mobility_domain, |
| sm->r0kh_id, sm->r0kh_id_len, sm->own_addr, |
| sm->pmk_r0, sm->pmk_r0_name, use_sha384) < 0) { |
| wpa_printf(MSG_WARNING, "FILS+FT: Could not derive PMK-R0"); |
| return -1; |
| } |
| sm->pmk_r0_len = use_sha384 ? SHA384_MAC_LEN : PMK_LEN; |
| wpa_printf(MSG_DEBUG, "FILS+FT: R1KH-ID: " MACSTR, |
| MAC2STR(sm->r1kh_id)); |
| pos = wpabuf_put(buf, WPA_PMK_NAME_LEN); |
| if (wpa_derive_pmk_r1_name(sm->pmk_r0_name, sm->r1kh_id, sm->own_addr, |
| sm->pmk_r1_name, use_sha384) < 0) { |
| wpa_printf(MSG_WARNING, "FILS+FT: Could not derive PMKR1Name"); |
| return -1; |
| } |
| os_memcpy(pos, sm->pmk_r1_name, WPA_PMK_NAME_LEN); |
| |
| if (sm->mgmt_group_cipher == WPA_CIPHER_AES_128_CMAC) { |
| /* Management Group Cipher Suite */ |
| pos = wpabuf_put(buf, RSN_SELECTOR_LEN); |
| RSN_SELECTOR_PUT(pos, RSN_CIPHER_SUITE_AES_128_CMAC); |
| } |
| |
| rsnie->len = ((u8 *) wpabuf_put(buf, 0) - (u8 *) rsnie) - 2; |
| return 0; |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| |
| |
| struct wpabuf * fils_build_assoc_req(struct wpa_sm *sm, const u8 **kek, |
| size_t *kek_len, const u8 **snonce, |
| const u8 **anonce, |
| const struct wpabuf **hlp, |
| unsigned int num_hlp) |
| { |
| struct wpabuf *buf; |
| size_t len; |
| unsigned int i; |
| |
| len = 1000; |
| #ifdef CONFIG_IEEE80211R |
| if (sm->fils_ft_ies) |
| len += wpabuf_len(sm->fils_ft_ies); |
| if (wpa_key_mgmt_ft(sm->key_mgmt)) |
| len += 256; |
| #endif /* CONFIG_IEEE80211R */ |
| for (i = 0; hlp && i < num_hlp; i++) |
| len += 10 + wpabuf_len(hlp[i]); |
| buf = wpabuf_alloc(len); |
| if (!buf) |
| return NULL; |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_key_mgmt_ft(sm->key_mgmt) && sm->fils_ft_ies) { |
| /* MDE and FTE when using FILS+FT */ |
| wpabuf_put_buf(buf, sm->fils_ft_ies); |
| /* RSNE with PMKR1Name in PMKID field */ |
| if (fils_ft_build_assoc_req_rsne(sm, buf) < 0) { |
| wpabuf_free(buf); |
| return NULL; |
| } |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| |
| /* FILS Session */ |
| wpabuf_put_u8(buf, WLAN_EID_EXTENSION); /* Element ID */ |
| wpabuf_put_u8(buf, 1 + FILS_SESSION_LEN); /* Length */ |
| /* Element ID Extension */ |
| wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_SESSION); |
| wpabuf_put_data(buf, sm->fils_session, FILS_SESSION_LEN); |
| |
| /* Everything after FILS Session element gets encrypted in the driver |
| * with KEK. The buffer returned from here is the plaintext version. */ |
| |
| /* TODO: FILS Public Key */ |
| |
| /* FILS Key Confirm */ |
| wpabuf_put_u8(buf, WLAN_EID_EXTENSION); /* Element ID */ |
| wpabuf_put_u8(buf, 1 + sm->fils_key_auth_len); /* Length */ |
| /* Element ID Extension */ |
| wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_KEY_CONFIRM); |
| wpabuf_put_data(buf, sm->fils_key_auth_sta, sm->fils_key_auth_len); |
| |
| /* FILS HLP Container */ |
| for (i = 0; hlp && i < num_hlp; i++) { |
| const u8 *pos = wpabuf_head(hlp[i]); |
| size_t left = wpabuf_len(hlp[i]); |
| |
| wpabuf_put_u8(buf, WLAN_EID_EXTENSION); /* Element ID */ |
| if (left <= 254) |
| len = 1 + left; |
| else |
| len = 255; |
| wpabuf_put_u8(buf, len); /* Length */ |
| /* Element ID Extension */ |
| wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_HLP_CONTAINER); |
| /* Destination MAC Address, Source MAC Address, HLP Packet. |
| * HLP Packet is in MSDU format (i.e., included the LLC/SNAP |
| * header when LPD is used). */ |
| wpabuf_put_data(buf, pos, len - 1); |
| pos += len - 1; |
| left -= len - 1; |
| while (left) { |
| wpabuf_put_u8(buf, WLAN_EID_FRAGMENT); |
| len = left > 255 ? 255 : left; |
| wpabuf_put_u8(buf, len); |
| wpabuf_put_data(buf, pos, len); |
| pos += len; |
| left -= len; |
| } |
| } |
| |
| /* TODO: FILS IP Address Assignment */ |
| |
| #ifdef CONFIG_OCV |
| if (wpa_sm_ocv_enabled(sm)) { |
| struct wpa_channel_info ci; |
| u8 *pos; |
| |
| if (wpa_sm_channel_info(sm, &ci) != 0) { |
| wpa_printf(MSG_WARNING, |
| "FILS: Failed to get channel info for OCI element"); |
| wpabuf_free(buf); |
| return NULL; |
| } |
| #ifdef CONFIG_TESTING_OPTIONS |
| if (sm->oci_freq_override_fils_assoc) { |
| wpa_printf(MSG_INFO, |
| "TEST: Override OCI KDE frequency %d -> %d MHz", |
| ci.frequency, |
| sm->oci_freq_override_fils_assoc); |
| ci.frequency = sm->oci_freq_override_fils_assoc; |
| } |
| #endif /* CONFIG_TESTING_OPTIONS */ |
| |
| pos = wpabuf_put(buf, OCV_OCI_EXTENDED_LEN); |
| if (ocv_insert_extended_oci(&ci, pos) < 0) { |
| wpabuf_free(buf); |
| return NULL; |
| } |
| } |
| #endif /* CONFIG_OCV */ |
| |
| wpa_hexdump_buf(MSG_DEBUG, "FILS: Association Request plaintext", buf); |
| |
| *kek = sm->ptk.kek; |
| *kek_len = sm->ptk.kek_len; |
| wpa_hexdump_key(MSG_DEBUG, "FILS: KEK for AEAD", *kek, *kek_len); |
| *snonce = sm->fils_nonce; |
| wpa_hexdump(MSG_DEBUG, "FILS: SNonce for AEAD AAD", |
| *snonce, FILS_NONCE_LEN); |
| *anonce = sm->fils_anonce; |
| wpa_hexdump(MSG_DEBUG, "FILS: ANonce for AEAD AAD", |
| *anonce, FILS_NONCE_LEN); |
| |
| return buf; |
| } |
| |
| |
| static void fils_process_hlp_resp(struct wpa_sm *sm, const u8 *resp, size_t len) |
| { |
| const u8 *pos, *end; |
| |
| wpa_hexdump(MSG_MSGDUMP, "FILS: HLP response", resp, len); |
| if (len < 2 * ETH_ALEN) |
| return; |
| pos = resp + 2 * ETH_ALEN; |
| end = resp + len; |
| if (end - pos >= 6 && |
| os_memcmp(pos, "\xaa\xaa\x03\x00\x00\x00", 6) == 0) |
| pos += 6; /* Remove SNAP/LLC header */ |
| wpa_sm_fils_hlp_rx(sm, resp, resp + ETH_ALEN, pos, end - pos); |
| } |
| |
| |
| static void fils_process_hlp_container(struct wpa_sm *sm, const u8 *pos, |
| size_t len) |
| { |
| const u8 *end = pos + len; |
| u8 *tmp, *tmp_pos; |
| |
| /* Check if there are any FILS HLP Container elements */ |
| while (end - pos >= 2) { |
| if (2 + pos[1] > end - pos) |
| return; |
| if (pos[0] == WLAN_EID_EXTENSION && |
| pos[1] >= 1 + 2 * ETH_ALEN && |
| pos[2] == WLAN_EID_EXT_FILS_HLP_CONTAINER) |
| break; |
| pos += 2 + pos[1]; |
| } |
| if (end - pos < 2) |
| return; /* No FILS HLP Container elements */ |
| |
| tmp = os_malloc(end - pos); |
| if (!tmp) |
| return; |
| |
| while (end - pos >= 2) { |
| if (2 + pos[1] > end - pos || |
| pos[0] != WLAN_EID_EXTENSION || |
| pos[1] < 1 + 2 * ETH_ALEN || |
| pos[2] != WLAN_EID_EXT_FILS_HLP_CONTAINER) |
| break; |
| tmp_pos = tmp; |
| os_memcpy(tmp_pos, pos + 3, pos[1] - 1); |
| tmp_pos += pos[1] - 1; |
| pos += 2 + pos[1]; |
| |
| /* Add possible fragments */ |
| while (end - pos >= 2 && pos[0] == WLAN_EID_FRAGMENT && |
| 2 + pos[1] <= end - pos) { |
| os_memcpy(tmp_pos, pos + 2, pos[1]); |
| tmp_pos += pos[1]; |
| pos += 2 + pos[1]; |
| } |
| |
| fils_process_hlp_resp(sm, tmp, tmp_pos - tmp); |
| } |
| |
| os_free(tmp); |
| } |
| |
| |
| int fils_process_assoc_resp(struct wpa_sm *sm, const u8 *resp, size_t len) |
| { |
| const struct ieee80211_mgmt *mgmt; |
| const u8 *end, *ie_start; |
| struct ieee802_11_elems elems; |
| int keylen, rsclen; |
| enum wpa_alg alg; |
| struct wpa_gtk_data gd; |
| int maxkeylen; |
| struct wpa_eapol_ie_parse kde; |
| |
| if (!sm || !sm->ptk_set) { |
| wpa_printf(MSG_DEBUG, "FILS: No KEK available"); |
| return -1; |
| } |
| |
| if (!wpa_key_mgmt_fils(sm->key_mgmt)) { |
| wpa_printf(MSG_DEBUG, "FILS: Not a FILS AKM"); |
| return -1; |
| } |
| |
| if (sm->fils_completed) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: Association has already been completed for this FILS authentication - ignore unexpected retransmission"); |
| return -1; |
| } |
| |
| wpa_hexdump(MSG_DEBUG, "FILS: (Re)Association Response frame", |
| resp, len); |
| |
| mgmt = (const struct ieee80211_mgmt *) resp; |
| if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.assoc_resp)) |
| return -1; |
| |
| end = resp + len; |
| /* Same offset for Association Response and Reassociation Response */ |
| ie_start = mgmt->u.assoc_resp.variable; |
| |
| if (ieee802_11_parse_elems(ie_start, end - ie_start, &elems, 1) == |
| ParseFailed) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: Failed to parse decrypted elements"); |
| goto fail; |
| } |
| |
| if (!elems.fils_session) { |
| wpa_printf(MSG_DEBUG, "FILS: No FILS Session element"); |
| return -1; |
| } |
| if (os_memcmp(elems.fils_session, sm->fils_session, |
| FILS_SESSION_LEN) != 0) { |
| wpa_printf(MSG_DEBUG, "FILS: FILS Session mismatch"); |
| wpa_hexdump(MSG_DEBUG, "FILS: Received FILS Session", |
| elems.fils_session, FILS_SESSION_LEN); |
| wpa_hexdump(MSG_DEBUG, "FILS: Expected FILS Session", |
| sm->fils_session, FILS_SESSION_LEN); |
| } |
| |
| if (!elems.rsn_ie) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: No RSNE in (Re)Association Response"); |
| /* As an interop workaround, allow this for now since IEEE Std |
| * 802.11ai-2016 did not include all the needed changes to make |
| * a FILS AP include RSNE in the frame. This workaround might |
| * eventually be removed and replaced with rejection (goto fail) |
| * to follow a strict interpretation of the standard. */ |
| } else if (wpa_compare_rsn_ie(wpa_key_mgmt_ft(sm->key_mgmt), |
| sm->ap_rsn_ie, sm->ap_rsn_ie_len, |
| elems.rsn_ie - 2, elems.rsn_ie_len + 2)) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, |
| "FILS: RSNE mismatch between Beacon/Probe Response and (Re)Association Response"); |
| wpa_hexdump(MSG_DEBUG, "FILS: RSNE in Beacon/Probe Response", |
| sm->ap_rsn_ie, sm->ap_rsn_ie_len); |
| wpa_hexdump(MSG_DEBUG, "FILS: RSNE in (Re)Association Response", |
| elems.rsn_ie, elems.rsn_ie_len); |
| goto fail; |
| } |
| |
| /* TODO: FILS Public Key */ |
| |
| if (!elems.fils_key_confirm) { |
| wpa_printf(MSG_DEBUG, "FILS: No FILS Key Confirm element"); |
| goto fail; |
| } |
| if (elems.fils_key_confirm_len != sm->fils_key_auth_len) { |
| wpa_printf(MSG_DEBUG, |
| "FILS: Unexpected Key-Auth length %d (expected %d)", |
| elems.fils_key_confirm_len, |
| (int) sm->fils_key_auth_len); |
| goto fail; |
| } |
| if (os_memcmp(elems.fils_key_confirm, sm->fils_key_auth_ap, |
| sm->fils_key_auth_len) != 0) { |
| wpa_printf(MSG_DEBUG, "FILS: Key-Auth mismatch"); |
| wpa_hexdump(MSG_DEBUG, "FILS: Received Key-Auth", |
| elems.fils_key_confirm, |
| elems.fils_key_confirm_len); |
| wpa_hexdump(MSG_DEBUG, "FILS: Expected Key-Auth", |
| sm->fils_key_auth_ap, sm->fils_key_auth_len); |
| goto fail; |
| } |
| |
| #ifdef CONFIG_OCV |
| if (wpa_sm_ocv_enabled(sm)) { |
| struct wpa_channel_info ci; |
| |
| if (wpa_sm_channel_info(sm, &ci) != 0) { |
| wpa_printf(MSG_WARNING, |
| "Failed to get channel info to validate received OCI in FILS (Re)Association Response frame"); |
| goto fail; |
| } |
| |
| if (ocv_verify_tx_params(elems.oci, elems.oci_len, &ci, |
| channel_width_to_int(ci.chanwidth), |
| ci.seg1_idx) != OCI_SUCCESS) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_INFO, OCV_FAILURE |
| "addr=" MACSTR " frame=fils-assoc error=%s", |
| MAC2STR(sm->bssid), ocv_errorstr); |
| goto fail; |
| } |
| } |
| #endif /* CONFIG_OCV */ |
| |
| #ifdef CONFIG_IEEE80211R |
| if (wpa_key_mgmt_ft(sm->key_mgmt) && sm->fils_ft_ies) { |
| struct wpa_ie_data rsn; |
| |
| /* Check that PMKR1Name derived by the AP matches */ |
| if (!elems.rsn_ie || |
| wpa_parse_wpa_ie_rsn(elems.rsn_ie - 2, elems.rsn_ie_len + 2, |
| &rsn) < 0 || |
| !rsn.pmkid || rsn.num_pmkid != 1 || |
| os_memcmp(rsn.pmkid, sm->pmk_r1_name, |
| WPA_PMK_NAME_LEN) != 0) { |
| wpa_printf(MSG_DEBUG, |
| "FILS+FT: No RSNE[PMKR1Name] match in AssocResp"); |
| goto fail; |
| } |
| } |
| #endif /* CONFIG_IEEE80211R */ |
| |
| /* Key Delivery */ |
| if (!elems.key_delivery) { |
| wpa_printf(MSG_DEBUG, "FILS: No Key Delivery element"); |
| goto fail; |
| } |
| |
| /* Parse GTK and set the key to the driver */ |
| os_memset(&gd, 0, sizeof(gd)); |
| if (wpa_supplicant_parse_ies(elems.key_delivery + WPA_KEY_RSC_LEN, |
| elems.key_delivery_len - WPA_KEY_RSC_LEN, |
| &kde) < 0) { |
| wpa_printf(MSG_DEBUG, "FILS: Failed to parse KDEs"); |
| goto fail; |
| } |
| if (!kde.gtk) { |
| wpa_printf(MSG_DEBUG, "FILS: No GTK KDE"); |
| goto fail; |
| } |
| maxkeylen = gd.gtk_len = kde.gtk_len - 2; |
| if (wpa_supplicant_check_group_cipher(sm, sm->group_cipher, |
| gd.gtk_len, maxkeylen, |
| &gd.key_rsc_len, &gd.alg)) |
| goto fail; |
| |
| wpa_hexdump_key(MSG_DEBUG, "FILS: Received GTK", kde.gtk, kde.gtk_len); |
| gd.keyidx = kde.gtk[0] & 0x3; |
| gd.tx = wpa_supplicant_gtk_tx_bit_workaround(sm, |
| !!(kde.gtk[0] & BIT(2))); |
| if (kde.gtk_len - 2 > sizeof(gd.gtk)) { |
| wpa_printf(MSG_DEBUG, "FILS: Too long GTK in GTK KDE (len=%lu)", |
| (unsigned long) kde.gtk_len - 2); |
| goto fail; |
| } |
| os_memcpy(gd.gtk, kde.gtk + 2, kde.gtk_len - 2); |
| |
| wpa_printf(MSG_DEBUG, "FILS: Set GTK to driver"); |
| if (wpa_supplicant_install_gtk(sm, &gd, elems.key_delivery, 0) < 0) { |
| wpa_printf(MSG_DEBUG, "FILS: Failed to set GTK"); |
| goto fail; |
| } |
| |
| if (ieee80211w_set_keys(sm, &kde) < 0) { |
| wpa_printf(MSG_DEBUG, "FILS: Failed to set IGTK"); |
| goto fail; |
| } |
| |
| alg = wpa_cipher_to_alg(sm->pairwise_cipher); |
| keylen = wpa_cipher_key_len(sm->pairwise_cipher); |
| if (keylen <= 0 || (unsigned int) keylen != sm->ptk.tk_len) { |
| wpa_printf(MSG_DEBUG, "FILS: TK length mismatch: %u != %lu", |
| keylen, (long unsigned int) sm->ptk.tk_len); |
| goto fail; |
| } |
| |
| rsclen = wpa_cipher_rsc_len(sm->pairwise_cipher); |
| wpa_hexdump_key(MSG_DEBUG, "FILS: Set TK to driver", |
| sm->ptk.tk, keylen); |
| if (wpa_sm_set_key(sm, alg, sm->bssid, 0, 1, null_rsc, rsclen, |
| sm->ptk.tk, keylen, KEY_FLAG_PAIRWISE_RX_TX) < 0) { |
| wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, |
| "FILS: Failed to set PTK to the driver (alg=%d keylen=%d bssid=" |
| MACSTR ")", |
| alg, keylen, MAC2STR(sm->bssid)); |
| goto fail; |
| } |
| |
| wpa_sm_store_ptk(sm, sm->bssid, sm->pairwise_cipher, |
| sm->dot11RSNAConfigPMKLifetime, &sm->ptk); |
| |
| /* TODO: TK could be cleared after auth frame exchange now that driver |
| * takes care of association frame encryption/decryption. */ |
| /* TK is not needed anymore in supplicant */ |
| os_memset(sm->ptk.tk, 0, WPA_TK_MAX_LEN); |
| sm->ptk.tk_len = 0; |
| sm->ptk.installed = 1; |
| |
| /* FILS HLP Container */ |
| fils_process_hlp_container(sm, ie_start, end - ie_start); |
| |
| /* TODO: FILS IP Address Assignment */ |
| |
| wpa_printf(MSG_DEBUG, "FILS: Auth+Assoc completed successfully"); |
| sm->fils_completed = 1; |
| forced_memzero(&gd, sizeof(gd)); |
| |
| if (kde.transition_disable) |
| wpa_sm_transition_disable(sm, kde.transition_disable[0]); |
| |
| return 0; |
| fail: |
| forced_memzero(&gd, sizeof(gd)); |
| return -1; |
| } |
| |
| |
| void wpa_sm_set_reset_fils_completed(struct wpa_sm *sm, int set) |
| { |
| if (sm) |
| sm->fils_completed = !!set; |
| } |
| |
| #endif /* CONFIG_FILS */ |
| |
| |
| int wpa_fils_is_completed(struct wpa_sm *sm) |
| { |
| #ifdef CONFIG_FILS |
| return sm && sm->fils_completed; |
| #else /* CONFIG_FILS */ |
| return 0; |
| #endif /* CONFIG_FILS */ |
| } |
| |
| |
| #ifdef CONFIG_OWE |
| |
| struct wpabuf * owe_build_assoc_req(struct wpa_sm *sm, u16 group) |
| { |
| struct wpabuf *ie = NULL, *pub = NULL; |
| size_t prime_len; |
| |
| if (group == 19) |
| prime_len = 32; |
| else if (group == 20) |
| prime_len = 48; |
| else if (group == 21) |
| prime_len = 66; |
| else |
| return NULL; |
| |
| crypto_ecdh_deinit(sm->owe_ecdh); |
| sm->owe_ecdh = crypto_ecdh_init(group); |
| if (!sm->owe_ecdh) |
| goto fail; |
| sm->owe_group = group; |
| pub = crypto_ecdh_get_pubkey(sm->owe_ecdh, 0); |
| pub = wpabuf_zeropad(pub, prime_len); |
| if (!pub) |
| goto fail; |
| |
| ie = wpabuf_alloc(5 + wpabuf_len(pub)); |
| if (!ie) |
| goto fail; |
| wpabuf_put_u8(ie, WLAN_EID_EXTENSION); |
| wpabuf_put_u8(ie, 1 + 2 + wpabuf_len(pub)); |
| wpabuf_put_u8(ie, WLAN_EID_EXT_OWE_DH_PARAM); |
| wpabuf_put_le16(ie, group); |
| wpabuf_put_buf(ie, pub); |
| wpabuf_free(pub); |
| wpa_hexdump_buf(MSG_DEBUG, "OWE: Diffie-Hellman Parameter element", |
| ie); |
| |
| return ie; |
| fail: |
| wpabuf_free(pub); |
| crypto_ecdh_deinit(sm->owe_ecdh); |
| sm->owe_ecdh = NULL; |
| return NULL; |
| } |
| |
| |
| int owe_process_assoc_resp(struct wpa_sm *sm, const u8 *bssid, |
| const u8 *resp_ies, size_t resp_ies_len) |
| { |
| struct ieee802_11_elems elems; |
| u16 group; |
| struct wpabuf *secret, *pub, *hkey; |
| int res; |
| u8 prk[SHA512_MAC_LEN], pmkid[SHA512_MAC_LEN]; |
| const char *info = "OWE Key Generation"; |
| const u8 *addr[2]; |
| size_t len[2]; |
| size_t hash_len, prime_len; |
| struct wpa_ie_data data; |
| |
| if (!resp_ies || |
| ieee802_11_parse_elems(resp_ies, resp_ies_len, &elems, 1) == |
| ParseFailed) { |
| wpa_printf(MSG_INFO, |
| "OWE: Could not parse Association Response frame elements"); |
| return -1; |
| } |
| |
| if (sm->cur_pmksa && elems.rsn_ie && |
| wpa_parse_wpa_ie_rsn(elems.rsn_ie - 2, 2 + elems.rsn_ie_len, |
| &data) == 0 && |
| data.num_pmkid == 1 && data.pmkid && |
| os_memcmp(sm->cur_pmksa->pmkid, data.pmkid, PMKID_LEN) == 0) { |
| wpa_printf(MSG_DEBUG, "OWE: Use PMKSA caching"); |
| wpa_sm_set_pmk_from_pmksa(sm); |
| return 0; |
| } |
| |
| if (!elems.owe_dh) { |
| wpa_printf(MSG_INFO, |
| "OWE: No Diffie-Hellman Parameter element found in Association Response frame"); |
| return -1; |
| } |
| |
| group = WPA_GET_LE16(elems.owe_dh); |
| if (group != sm->owe_group) { |
| wpa_printf(MSG_INFO, |
| "OWE: Unexpected Diffie-Hellman group in response: %u", |
| group); |
| return -1; |
| } |
| |
| if (!sm->owe_ecdh) { |
| wpa_printf(MSG_INFO, "OWE: No ECDH state available"); |
| return -1; |
| } |
| |
| if (group == 19) |
| prime_len = 32; |
| else if (group == 20) |
| prime_len = 48; |
| else if (group == 21) |
| prime_len = 66; |
| else |
| return -1; |
| |
| secret = crypto_ecdh_set_peerkey(sm->owe_ecdh, 0, |
| elems.owe_dh + 2, |
| elems.owe_dh_len - 2); |
| secret = wpabuf_zeropad(secret, prime_len); |
| if (!secret) { |
| wpa_printf(MSG_DEBUG, "OWE: Invalid peer DH public key"); |
| return -1; |
| } |
| wpa_hexdump_buf_key(MSG_DEBUG, "OWE: DH shared secret", secret); |
| |
| /* prk = HKDF-extract(C | A | group, z) */ |
| |
| pub = crypto_ecdh_get_pubkey(sm->owe_ecdh, 0); |
| if (!pub) { |
| wpabuf_clear_free(secret); |
| return -1; |
| } |
| |
| /* PMKID = Truncate-128(Hash(C | A)) */ |
| addr[0] = wpabuf_head(pub); |
| len[0] = wpabuf_len(pub); |
| addr[1] = elems.owe_dh + 2; |
| len[1] = elems.owe_dh_len - 2; |
| if (group == 19) { |
| res = sha256_vector(2, addr, len, pmkid); |
| hash_len = SHA256_MAC_LEN; |
| } else if (group == 20) { |
| res = sha384_vector(2, addr, len, pmkid); |
| hash_len = SHA384_MAC_LEN; |
| } else if (group == 21) { |
| res = sha512_vector(2, addr, len, pmkid); |
| hash_len = SHA512_MAC_LEN; |
| } else { |
| res = -1; |
| hash_len = 0; |
| } |
| pub = wpabuf_zeropad(pub, prime_len); |
| if (res < 0 || !pub) { |
| wpabuf_free(pub); |
| wpabuf_clear_free(secret); |
| return -1; |
| } |
| |
| hkey = wpabuf_alloc(wpabuf_len(pub) + elems.owe_dh_len - 2 + 2); |
| if (!hkey) { |
| wpabuf_free(pub); |
| wpabuf_clear_free(secret); |
| return -1; |
| } |
| |
| wpabuf_put_buf(hkey, pub); /* C */ |
| wpabuf_free(pub); |
| wpabuf_put_data(hkey, elems.owe_dh + 2, elems.owe_dh_len - 2); /* A */ |
| wpabuf_put_le16(hkey, sm->owe_group); /* group */ |
| if (group == 19) |
| res = hmac_sha256(wpabuf_head(hkey), wpabuf_len(hkey), |
| wpabuf_head(secret), wpabuf_len(secret), prk); |
| else if (group == 20) |
| res = hmac_sha384(wpabuf_head(hkey), wpabuf_len(hkey), |
| wpabuf_head(secret), wpabuf_len(secret), prk); |
| else if (group == 21) |
| res = hmac_sha512(wpabuf_head(hkey), wpabuf_len(hkey), |
| wpabuf_head(secret), wpabuf_len(secret), prk); |
| wpabuf_clear_free(hkey); |
| wpabuf_clear_free(secret); |
| if (res < 0) |
| return -1; |
| |
| wpa_hexdump_key(MSG_DEBUG, "OWE: prk", prk, hash_len); |
| |
| /* PMK = HKDF-expand(prk, "OWE Key Generation", n) */ |
| |
| if (group == 19) |
| res = hmac_sha256_kdf(prk, hash_len, NULL, (const u8 *) info, |
| os_strlen(info), sm->pmk, hash_len); |
| else if (group == 20) |
| res = hmac_sha384_kdf(prk, hash_len, NULL, (const u8 *) info, |
| os_strlen(info), sm->pmk, hash_len); |
| else if (group == 21) |
| res = hmac_sha512_kdf(prk, hash_len, NULL, (const u8 *) info, |
| os_strlen(info), sm->pmk, hash_len); |
| forced_memzero(prk, SHA512_MAC_LEN); |
| if (res < 0) { |
| sm->pmk_len = 0; |
| return -1; |
| } |
| sm->pmk_len = hash_len; |
| |
| wpa_hexdump_key(MSG_DEBUG, "OWE: PMK", sm->pmk, sm->pmk_len); |
| wpa_hexdump(MSG_DEBUG, "OWE: PMKID", pmkid, PMKID_LEN); |
| pmksa_cache_add(sm->pmksa, sm->pmk, sm->pmk_len, pmkid, NULL, 0, |
| bssid, sm->own_addr, sm->network_ctx, sm->key_mgmt, |
| NULL); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_OWE */ |
| |
| |
| void wpa_sm_set_fils_cache_id(struct wpa_sm *sm, const u8 *fils_cache_id) |
| { |
| #ifdef CONFIG_FILS |
| if (sm && fils_cache_id) { |
| sm->fils_cache_id_set = 1; |
| os_memcpy(sm->fils_cache_id, fils_cache_id, FILS_CACHE_ID_LEN); |
| } |
| #endif /* CONFIG_FILS */ |
| } |
| |
| |
| #ifdef CONFIG_DPP2 |
| void wpa_sm_set_dpp_z(struct wpa_sm *sm, const struct wpabuf *z) |
| { |
| if (sm) { |
| wpabuf_clear_free(sm->dpp_z); |
| sm->dpp_z = z ? wpabuf_dup(z) : NULL; |
| } |
| } |
| #endif /* CONFIG_DPP2 */ |
| |
| |
| #ifdef CONFIG_PASN |
| void wpa_pasn_pmksa_cache_add(struct wpa_sm *sm, const u8 *pmk, size_t pmk_len, |
| const u8 *pmkid, const u8 *bssid, int key_mgmt) |
| { |
| sm->cur_pmksa = pmksa_cache_add(sm->pmksa, pmk, pmk_len, pmkid, NULL, 0, |
| bssid, sm->own_addr, NULL, |
| key_mgmt, 0); |
| } |
| #endif /* CONFIG_PASN */ |
| |
| |
| void wpa_sm_pmksa_cache_reconfig(struct wpa_sm *sm) |
| { |
| if (sm) |
| pmksa_cache_reconfig(sm->pmksa); |
| } |