| /* |
| * wpa_supplicant/hostapd control interface library |
| * Copyright (c) 2004-2017, Jouni Malinen <j@w1.fi> |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| */ |
| |
| #ifndef WPA_CTRL_H |
| #define WPA_CTRL_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* wpa_supplicant control interface - fixed message prefixes */ |
| |
| /** Interactive request for identity/password/pin */ |
| #define WPA_CTRL_REQ "CTRL-REQ-" |
| |
| /** Response to identity/password/pin request */ |
| #define WPA_CTRL_RSP "CTRL-RSP-" |
| |
| /* Event messages with fixed prefix */ |
| /** Authentication completed successfully and data connection enabled */ |
| #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED " |
| /** Disconnected, data connection is not available */ |
| #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED " |
| /** Association rejected during connection attempt */ |
| #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT " |
| /** Authentication rejected during connection attempt */ |
| #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT " |
| /** wpa_supplicant is exiting */ |
| #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING " |
| /** Password change was completed successfully */ |
| #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED " |
| /** EAP-Request/Notification received */ |
| #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION " |
| /** EAP authentication started (EAP-Request/Identity received) */ |
| #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED " |
| /** EAP method proposed by the server */ |
| #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD " |
| /** EAP method selected */ |
| #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD " |
| /** EAP peer certificate from TLS */ |
| #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT " |
| /** EAP peer certificate alternative subject name component from TLS */ |
| #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT " |
| /** EAP TLS certificate chain validation error */ |
| #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR " |
| /** EAP status */ |
| #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS " |
| /** Retransmit the previous request packet */ |
| #define WPA_EVENT_EAP_RETRANSMIT "CTRL-EVENT-EAP-RETRANSMIT " |
| #define WPA_EVENT_EAP_RETRANSMIT2 "CTRL-EVENT-EAP-RETRANSMIT2 " |
| /** EAP authentication completed successfully */ |
| #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS " |
| #define WPA_EVENT_EAP_SUCCESS2 "CTRL-EVENT-EAP-SUCCESS2 " |
| /** EAP authentication failed (EAP-Failure received) */ |
| #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE " |
| #define WPA_EVENT_EAP_FAILURE2 "CTRL-EVENT-EAP-FAILURE2 " |
| /** EAP authentication failed due to no response received */ |
| #define WPA_EVENT_EAP_TIMEOUT_FAILURE "CTRL-EVENT-EAP-TIMEOUT-FAILURE " |
| #define WPA_EVENT_EAP_TIMEOUT_FAILURE2 "CTRL-EVENT-EAP-TIMEOUT-FAILURE2 " |
| #define WPA_EVENT_EAP_ERROR_CODE "EAP-ERROR-CODE " |
| /** Network block temporarily disabled (e.g., due to authentication failure) */ |
| #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED " |
| /** Temporarily disabled network block re-enabled */ |
| #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED " |
| /** New scan started */ |
| #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED " |
| /** New scan results available */ |
| #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS " |
| /** Scan command failed */ |
| #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED " |
| /** wpa_supplicant state change */ |
| #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE " |
| /** A new BSS entry was added (followed by BSS entry id and BSSID) */ |
| #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED " |
| /** A BSS entry was removed (followed by BSS entry id and BSSID) */ |
| #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED " |
| /** No suitable network was found */ |
| #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND " |
| /** Change in the signal level was reported by the driver */ |
| #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE " |
| /** Beacon loss reported by the driver */ |
| #define WPA_EVENT_BEACON_LOSS "CTRL-EVENT-BEACON-LOSS " |
| /** Regulatory domain channel */ |
| #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE " |
| /** Channel switch started (followed by freq=<MHz> and other channel parameters) |
| */ |
| #define WPA_EVENT_CHANNEL_SWITCH_STARTED "CTRL-EVENT-STARTED-CHANNEL-SWITCH " |
| /** Channel switch (followed by freq=<MHz> and other channel parameters) */ |
| #define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH " |
| /** MLO link channel switch started (followed by freq=<MHz> and other channel |
| * parameters) |
| */ |
| #define WPA_EVENT_LINK_CHANNEL_SWITCH_STARTED \ |
| "CTRL-EVENT-STARTED-LINK-CHANNEL-SWITCH " |
| /** MLO link channel switch (followed by freq=<MHz> and other channel |
| * parameters) |
| */ |
| #define WPA_EVENT_LINK_CHANNEL_SWITCH "CTRL-EVENT-LINK-CHANNEL-SWITCH " |
| /** SAE authentication failed due to unknown password identifier */ |
| #define WPA_EVENT_SAE_UNKNOWN_PASSWORD_IDENTIFIER \ |
| "CTRL-EVENT-SAE-UNKNOWN-PASSWORD-IDENTIFIER " |
| /** Unprotected Beacon frame dropped */ |
| #define WPA_EVENT_UNPROT_BEACON "CTRL-EVENT-UNPROT-BEACON " |
| /** Decision made to do a within-ESS roam */ |
| #define WPA_EVENT_DO_ROAM "CTRL-EVENT-DO-ROAM " |
| /** Decision made to skip a within-ESS roam */ |
| #define WPA_EVENT_SKIP_ROAM "CTRL-EVENT-SKIP-ROAM " |
| /** TID-to-link mapping response event */ |
| #define WPA_EVENT_T2LM_UPDATE "CTRL-EVENT-T2LM-UPDATE " |
| /** MLO link reconfiguration event */ |
| #define WPA_EVENT_LINK_RECONFIG "CTRL-EVENT-LINK-RECONFIG " |
| |
| /** IP subnet status change notification |
| * |
| * When using an offloaded roaming mechanism where driver/firmware takes care |
| * of roaming and IP subnet validation checks post-roaming, this event can |
| * indicate whether IP subnet has changed. |
| * |
| * The event has a status=<0/1/2> parameter where |
| * 0 = unknown |
| * 1 = IP subnet unchanged (can continue to use the old IP address) |
| * 2 = IP subnet changed (need to get a new IP address) |
| */ |
| #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE " |
| |
| /** RSN IBSS 4-way handshakes completed with specified peer */ |
| #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED " |
| |
| /** Notification of frequency conflict due to a concurrent operation. |
| * |
| * The indicated network is disabled and needs to be re-enabled before it can |
| * be used again. |
| */ |
| #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT " |
| /** Frequency ranges that the driver recommends to avoid */ |
| #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ " |
| /** A new network profile was added (followed by network entry id) */ |
| #define WPA_EVENT_NETWORK_ADDED "CTRL-EVENT-NETWORK-ADDED " |
| /** A network profile was removed (followed by prior network entry id) */ |
| #define WPA_EVENT_NETWORK_REMOVED "CTRL-EVENT-NETWORK-REMOVED " |
| /** Result of MSCS setup */ |
| #define WPA_EVENT_MSCS_RESULT "CTRL-EVENT-MSCS-RESULT " |
| /** WPS overlap detected in PBC mode */ |
| #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED " |
| /** Available WPS AP with active PBC found in scan results */ |
| #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC " |
| /** Available WPS AP with our address as authorized in scan results */ |
| #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH " |
| /** Available WPS AP with recently selected PIN registrar found in scan results |
| */ |
| #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN " |
| /** Available WPS AP found in scan results */ |
| #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE " |
| /** A new credential received */ |
| #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED " |
| /** M2D received */ |
| #define WPS_EVENT_M2D "WPS-M2D " |
| /** WPS registration failed after M2/M2D */ |
| #define WPS_EVENT_FAIL "WPS-FAIL " |
| /** WPS registration completed successfully */ |
| #define WPS_EVENT_SUCCESS "WPS-SUCCESS " |
| /** WPS enrollment attempt timed out and was terminated */ |
| #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT " |
| /* PBC mode was activated */ |
| #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE " |
| /* PBC mode was disabled */ |
| #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE " |
| |
| #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN " |
| |
| #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK " |
| /** Result of SCS setup */ |
| #define WPA_EVENT_SCS_RESULT "CTRL-EVENT-SCS-RESULT " |
| /* Event indicating DSCP policy */ |
| #define WPA_EVENT_DSCP_POLICY "CTRL-EVENT-DSCP-POLICY " |
| |
| /* WPS ER events */ |
| #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD " |
| #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE " |
| #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD " |
| #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE " |
| #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS " |
| #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG " |
| |
| /* DPP events */ |
| #define DPP_EVENT_AUTH_SUCCESS "DPP-AUTH-SUCCESS " |
| #define DPP_EVENT_AUTH_INIT_FAILED "DPP-AUTH-INIT-FAILED " |
| #define DPP_EVENT_NOT_COMPATIBLE "DPP-NOT-COMPATIBLE " |
| #define DPP_EVENT_RESPONSE_PENDING "DPP-RESPONSE-PENDING " |
| #define DPP_EVENT_SCAN_PEER_QR_CODE "DPP-SCAN-PEER-QR-CODE " |
| #define DPP_EVENT_AUTH_DIRECTION "DPP-AUTH-DIRECTION " |
| #define DPP_EVENT_CONF_RECEIVED "DPP-CONF-RECEIVED " |
| #define DPP_EVENT_CONF_SENT "DPP-CONF-SENT " |
| #define DPP_EVENT_CONF_FAILED "DPP-CONF-FAILED " |
| #define DPP_EVENT_CONN_STATUS_RESULT "DPP-CONN-STATUS-RESULT " |
| #define DPP_EVENT_CONFOBJ_AKM "DPP-CONFOBJ-AKM " |
| #define DPP_EVENT_CONFOBJ_SSID "DPP-CONFOBJ-SSID " |
| #define DPP_EVENT_CONFOBJ_SSID_CHARSET "DPP-CONFOBJ-SSID-CHARSET " |
| #define DPP_EVENT_CONFOBJ_PASS "DPP-CONFOBJ-PASS " |
| #define DPP_EVENT_CONFOBJ_PSK "DPP-CONFOBJ-PSK " |
| #define DPP_EVENT_CONNECTOR "DPP-CONNECTOR " |
| #define DPP_EVENT_C_SIGN_KEY "DPP-C-SIGN-KEY " |
| #define DPP_EVENT_PP_KEY "DPP-PP-KEY " |
| #define DPP_EVENT_NET_ACCESS_KEY "DPP-NET-ACCESS-KEY " |
| #define DPP_EVENT_SERVER_NAME "DPP-SERVER-NAME " |
| #define DPP_EVENT_CERTBAG "DPP-CERTBAG " |
| #define DPP_EVENT_CACERT "DPP-CACERT " |
| #define DPP_EVENT_MISSING_CONNECTOR "DPP-MISSING-CONNECTOR " |
| #define DPP_EVENT_NETWORK_ID "DPP-NETWORK-ID " |
| #define DPP_EVENT_CONFIGURATOR_ID "DPP-CONFIGURATOR-ID " |
| #define DPP_EVENT_RX "DPP-RX " |
| #define DPP_EVENT_TX "DPP-TX " |
| #define DPP_EVENT_TX_STATUS "DPP-TX-STATUS " |
| #define DPP_EVENT_FAIL "DPP-FAIL " |
| #define DPP_EVENT_PKEX_T_LIMIT "DPP-PKEX-T-LIMIT " |
| #define DPP_EVENT_INTRO "DPP-INTRO " |
| #define DPP_EVENT_CONF_REQ_RX "DPP-CONF-REQ-RX " |
| #define DPP_EVENT_CHIRP_STOPPED "DPP-CHIRP-STOPPED " |
| #define DPP_EVENT_MUD_URL "DPP-MUD-URL " |
| #define DPP_EVENT_BAND_SUPPORT "DPP-BAND-SUPPORT " |
| #define DPP_EVENT_CSR "DPP-CSR " |
| #define DPP_EVENT_CHIRP_RX "DPP-CHIRP-RX " |
| #define DPP_EVENT_CONF_NEEDED "DPP-CONF-NEEDED " |
| #define DPP_EVENT_PB_STATUS "DPP-PB-STATUS " |
| #define DPP_EVENT_PB_RESULT "DPP-PB-RESULT " |
| #define DPP_EVENT_RELAY_NEEDS_CONTROLLER "DPP-RELAY-NEEDS-CONTROLLER " |
| |
| /* MESH events */ |
| #define MESH_GROUP_STARTED "MESH-GROUP-STARTED " |
| #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED " |
| #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED " |
| #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED " |
| /** Mesh SAE authentication failure. Wrong password suspected. */ |
| #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE " |
| #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED " |
| |
| /* WMM AC events */ |
| #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED " |
| #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED " |
| #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED " |
| |
| /** P2P device found */ |
| #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND " |
| |
| /** P2P device lost */ |
| #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST " |
| |
| /** A P2P device requested GO negotiation, but we were not ready to start the |
| * negotiation */ |
| #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST " |
| #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS " |
| #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE " |
| #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS " |
| #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE " |
| #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED " |
| #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED " |
| #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE " |
| #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE " |
| /* parameters: <peer address> <PIN> */ |
| #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN " |
| /* parameters: <peer address> */ |
| #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN " |
| /* parameters: <peer address> */ |
| #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ " |
| /* parameters: <peer address> */ |
| #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP " |
| /* parameters: <peer address> <status> */ |
| #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE" |
| /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */ |
| #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ " |
| /* parameters: <src addr> <update indicator> <TLVs> */ |
| #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP " |
| #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP " |
| #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED " |
| #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT " |
| #define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED " |
| #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED " |
| #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id=" |
| #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE " |
| #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO " |
| #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT " |
| #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT " |
| #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG " |
| #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED " |
| |
| /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */ |
| #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT " |
| #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP " |
| |
| #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START " |
| #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE " |
| |
| #define INTERWORKING_AP "INTERWORKING-AP " |
| #define INTERWORKING_EXCLUDED "INTERWORKING-BLACKLISTED " |
| #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH " |
| #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED " |
| #define INTERWORKING_SELECTED "INTERWORKING-SELECTED " |
| |
| /* Credential block added; parameters: <id> */ |
| #define CRED_ADDED "CRED-ADDED " |
| /* Credential block modified; parameters: <id> <field> */ |
| #define CRED_MODIFIED "CRED-MODIFIED " |
| /* Credential block removed; parameters: <id> */ |
| #define CRED_REMOVED "CRED-REMOVED " |
| |
| #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO " |
| /* parameters: <addr> <dialog_token> <freq> */ |
| #define GAS_QUERY_START "GAS-QUERY-START " |
| /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */ |
| #define GAS_QUERY_DONE "GAS-QUERY-DONE " |
| |
| /* parameters: <addr> <result> */ |
| #define ANQP_QUERY_DONE "ANQP-QUERY-DONE " |
| |
| #define RX_ANQP "RX-ANQP " |
| #define RX_HS20_ANQP "RX-HS20-ANQP " |
| #define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON " |
| #define RX_HS20_ICON "RX-HS20-ICON " |
| #define RX_MBO_ANQP "RX-MBO-ANQP " |
| |
| /* parameters: <Venue Number> <Venue URL> */ |
| #define RX_VENUE_URL "RX-VENUE-URL " |
| |
| #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION " |
| #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE " |
| #define HS20_T_C_ACCEPTANCE "HS20-T-C-ACCEPTANCE " |
| |
| #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START " |
| #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT " |
| |
| #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED " |
| #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED " |
| |
| /* hostapd control interface - fixed message prefixes */ |
| #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED " |
| #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS " |
| #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS " |
| #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED " |
| #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED " |
| #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED " |
| #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED " |
| #define WPS_EVENT_PIN_ACTIVE "WPS-PIN-ACTIVE " |
| #define WPS_EVENT_CANCEL "WPS-CANCEL " |
| #define AP_STA_CONNECTED "AP-STA-CONNECTED " |
| #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED " |
| #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH " |
| #define AP_STA_POLL_OK "AP-STA-POLL-OK " |
| |
| #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA " |
| #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA " |
| |
| #define HS20_T_C_FILTERING_ADD "HS20-T-C-FILTERING-ADD " |
| #define HS20_T_C_FILTERING_REMOVE "HS20-T-C-FILTERING-REMOVE " |
| |
| #define AP_EVENT_ENABLED "AP-ENABLED " |
| #define AP_EVENT_DISABLED "AP-DISABLED " |
| |
| #define INTERFACE_ENABLED "INTERFACE-ENABLED " |
| #define INTERFACE_DISABLED "INTERFACE-DISABLED " |
| |
| #define ACS_EVENT_STARTED "ACS-STARTED " |
| #define ACS_EVENT_COMPLETED "ACS-COMPLETED " |
| #define ACS_EVENT_FAILED "ACS-FAILED " |
| |
| #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED " |
| #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL " |
| #define DFS_EVENT_CAC_START "DFS-CAC-START " |
| #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED " |
| #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED " |
| #define DFS_EVENT_PRE_CAC_EXPIRED "DFS-PRE-CAC-EXPIRED " |
| |
| #define AP_CSA_FINISHED "AP-CSA-FINISHED " |
| |
| #define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED " |
| #define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON " |
| |
| /* BSS Transition Management Query frame received */ |
| #define BSS_TM_QUERY "BSS-TM-QUERY " |
| |
| /* BSS Transition Management Response frame received */ |
| #define BSS_TM_RESP "BSS-TM-RESP " |
| |
| /* Collocated Interference Request frame received; |
| * parameters: <dialog token> <automatic report enabled> <report timeout> */ |
| #define COLOC_INTF_REQ "COLOC-INTF-REQ " |
| /* Collocated Interference Report frame received; |
| * parameters: <STA address> <dialog token> <hexdump of report elements> */ |
| #define COLOC_INTF_REPORT "COLOC-INTF-REPORT " |
| |
| /* MBO IE with cellular data connection preference received */ |
| #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE " |
| |
| /* BSS Transition Management Request received with MBO transition reason */ |
| #define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON " |
| |
| /* parameters: <STA address> <dialog token> <ack=0/1> */ |
| #define BEACON_REQ_TX_STATUS "BEACON-REQ-TX-STATUS " |
| /* parameters: <STA address> <dialog token> <report mode> <beacon report> */ |
| #define BEACON_RESP_RX "BEACON-RESP-RX " |
| |
| /* PMKSA cache entry added; parameters: <BSSID> <network_id> */ |
| #define PMKSA_CACHE_ADDED "PMKSA-CACHE-ADDED " |
| /* PMKSA cache entry removed; parameters: <BSSID> <network_id> */ |
| #define PMKSA_CACHE_REMOVED "PMKSA-CACHE-REMOVED " |
| |
| /* FILS HLP Container receive; parameters: dst=<addr> src=<addr> frame=<hexdump> |
| */ |
| #define FILS_HLP_RX "FILS-HLP-RX " |
| |
| /* Event to indicate Probe Request frame; |
| * parameters: sa=<STA MAC address> signal=<signal> */ |
| #define RX_PROBE_REQUEST "RX-PROBE-REQUEST " |
| |
| /* Event to indicate station's HT/VHT operation mode change information */ |
| #define STA_OPMODE_MAX_BW_CHANGED "STA-OPMODE-MAX-BW-CHANGED " |
| #define STA_OPMODE_SMPS_MODE_CHANGED "STA-OPMODE-SMPS-MODE-CHANGED " |
| #define STA_OPMODE_N_SS_CHANGED "STA-OPMODE-N_SS-CHANGED " |
| |
| /* New interface addition or removal for 4addr WDS SDA */ |
| #define WDS_STA_INTERFACE_ADDED "WDS-STA-INTERFACE-ADDED " |
| #define WDS_STA_INTERFACE_REMOVED "WDS-STA-INTERFACE-REMOVED " |
| |
| /* Transition mode disabled indication - followed by bitmap */ |
| #define TRANSITION_DISABLE "TRANSITION-DISABLE " |
| |
| /* OCV validation failure; parameters: addr=<src addr> |
| * frame=<saqueryreq/saqueryresp> error=<error string> */ |
| #define OCV_FAILURE "OCV-FAILURE " |
| |
| /* Event triggered for received management frame */ |
| #define AP_MGMT_FRAME_RECEIVED "AP-MGMT-FRAME-RECEIVED " |
| |
| #ifndef BIT |
| #define BIT(x) (1U << (x)) |
| #endif |
| |
| /* PASN authentication status */ |
| #define PASN_AUTH_STATUS "PASN-AUTH-STATUS " |
| |
| /* BSS command information masks */ |
| |
| #define WPA_BSS_MASK_ALL 0xFFFDFFFF |
| #define WPA_BSS_MASK_ID BIT(0) |
| #define WPA_BSS_MASK_BSSID BIT(1) |
| #define WPA_BSS_MASK_FREQ BIT(2) |
| #define WPA_BSS_MASK_BEACON_INT BIT(3) |
| #define WPA_BSS_MASK_CAPABILITIES BIT(4) |
| #define WPA_BSS_MASK_QUAL BIT(5) |
| #define WPA_BSS_MASK_NOISE BIT(6) |
| #define WPA_BSS_MASK_LEVEL BIT(7) |
| #define WPA_BSS_MASK_TSF BIT(8) |
| #define WPA_BSS_MASK_AGE BIT(9) |
| #define WPA_BSS_MASK_IE BIT(10) |
| #define WPA_BSS_MASK_FLAGS BIT(11) |
| #define WPA_BSS_MASK_SSID BIT(12) |
| #define WPA_BSS_MASK_WPS_SCAN BIT(13) |
| #define WPA_BSS_MASK_P2P_SCAN BIT(14) |
| #define WPA_BSS_MASK_INTERNETW BIT(15) |
| #define WPA_BSS_MASK_WIFI_DISPLAY BIT(16) |
| #define WPA_BSS_MASK_DELIM BIT(17) |
| #define WPA_BSS_MASK_MESH_SCAN BIT(18) |
| #define WPA_BSS_MASK_SNR BIT(19) |
| #define WPA_BSS_MASK_EST_THROUGHPUT BIT(20) |
| #define WPA_BSS_MASK_FST BIT(21) |
| #define WPA_BSS_MASK_UPDATE_IDX BIT(22) |
| #define WPA_BSS_MASK_BEACON_IE BIT(23) |
| #define WPA_BSS_MASK_FILS_INDICATION BIT(24) |
| #define WPA_BSS_MASK_RNR BIT(25) |
| #define WPA_BSS_MASK_ML BIT(26) |
| |
| |
| /* VENDOR_ELEM_* frame id values */ |
| enum wpa_vendor_elem_frame { |
| VENDOR_ELEM_PROBE_REQ_P2P = 0, |
| VENDOR_ELEM_PROBE_RESP_P2P = 1, |
| VENDOR_ELEM_PROBE_RESP_P2P_GO = 2, |
| VENDOR_ELEM_BEACON_P2P_GO = 3, |
| VENDOR_ELEM_P2P_PD_REQ = 4, |
| VENDOR_ELEM_P2P_PD_RESP = 5, |
| VENDOR_ELEM_P2P_GO_NEG_REQ = 6, |
| VENDOR_ELEM_P2P_GO_NEG_RESP = 7, |
| VENDOR_ELEM_P2P_GO_NEG_CONF = 8, |
| VENDOR_ELEM_P2P_INV_REQ = 9, |
| VENDOR_ELEM_P2P_INV_RESP = 10, |
| VENDOR_ELEM_P2P_ASSOC_REQ = 11, |
| VENDOR_ELEM_P2P_ASSOC_RESP = 12, |
| VENDOR_ELEM_ASSOC_REQ = 13, |
| VENDOR_ELEM_PROBE_REQ = 14, |
| NUM_VENDOR_ELEM_FRAMES |
| }; |
| |
| |
| /* wpa_supplicant/hostapd control interface access */ |
| |
| /** |
| * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd |
| * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used. |
| * Returns: Pointer to abstract control interface data or %NULL on failure |
| * |
| * This function is used to open a control interface to wpa_supplicant/hostapd. |
| * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path |
| * is configured in wpa_supplicant/hostapd and other programs using the control |
| * interface need to use matching path configuration. |
| */ |
| struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path); |
| |
| /** |
| * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd |
| * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used. |
| * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket |
| * is used. |
| * Returns: Pointer to abstract control interface data or %NULL on failure |
| * |
| * This function is used to open a control interface to wpa_supplicant/hostapd |
| * when the socket path for client need to be specified explicitly. Default |
| * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client |
| * socket path is /tmp. |
| */ |
| struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path); |
| |
| |
| /** |
| * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd |
| * @ctrl: Control interface data from wpa_ctrl_open() |
| * |
| * This function is used to close a control interface. |
| */ |
| void wpa_ctrl_close(struct wpa_ctrl *ctrl); |
| |
| |
| /** |
| * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd |
| * @ctrl: Control interface data from wpa_ctrl_open() |
| * @cmd: Command; usually, ASCII text, e.g., "PING" |
| * @cmd_len: Length of the cmd in bytes |
| * @reply: Buffer for the response |
| * @reply_len: Reply buffer length |
| * @msg_cb: Callback function for unsolicited messages or %NULL if not used |
| * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout |
| * |
| * This function is used to send commands to wpa_supplicant/hostapd. Received |
| * response will be written to reply and reply_len is set to the actual length |
| * of the reply. This function will block for up to 10 seconds while waiting |
| * for the reply. If unsolicited messages are received, the blocking time may |
| * be longer. |
| * |
| * msg_cb can be used to register a callback function that will be called for |
| * unsolicited messages received while waiting for the command response. These |
| * messages may be received if wpa_ctrl_request() is called at the same time as |
| * wpa_supplicant/hostapd is sending such a message. This can happen only if |
| * the program has used wpa_ctrl_attach() to register itself as a monitor for |
| * event messages. Alternatively to msg_cb, programs can register two control |
| * interface connections and use one of them for commands and the other one for |
| * receiving event messages, in other words, call wpa_ctrl_attach() only for |
| * the control interface connection that will be used for event messages. |
| */ |
| int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len, |
| char *reply, size_t *reply_len, |
| void (*msg_cb)(char *msg, size_t len)); |
| |
| |
| /** |
| * wpa_ctrl_attach - Register as an event monitor for the control interface |
| * @ctrl: Control interface data from wpa_ctrl_open() |
| * Returns: 0 on success, -1 on failure, -2 on timeout |
| * |
| * This function registers the control interface connection as a monitor for |
| * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the |
| * control interface connection starts receiving event messages that can be |
| * read with wpa_ctrl_recv(). |
| */ |
| int wpa_ctrl_attach(struct wpa_ctrl *ctrl); |
| |
| |
| /** |
| * wpa_ctrl_detach - Unregister event monitor from the control interface |
| * @ctrl: Control interface data from wpa_ctrl_open() |
| * Returns: 0 on success, -1 on failure, -2 on timeout |
| * |
| * This function unregisters the control interface connection as a monitor for |
| * wpa_supplicant/hostapd events, i.e., cancels the registration done with |
| * wpa_ctrl_attach(). |
| */ |
| int wpa_ctrl_detach(struct wpa_ctrl *ctrl); |
| |
| |
| /** |
| * wpa_ctrl_recv - Receive a pending control interface message |
| * @ctrl: Control interface data from wpa_ctrl_open() |
| * @reply: Buffer for the message data |
| * @reply_len: Length of the reply buffer |
| * Returns: 0 on success, -1 on failure |
| * |
| * This function will receive a pending control interface message. The received |
| * response will be written to reply and reply_len is set to the actual length |
| * of the reply. |
| |
| * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach() |
| * must have been used to register the control interface as an event monitor. |
| */ |
| int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len); |
| |
| |
| /** |
| * wpa_ctrl_pending - Check whether there are pending event messages |
| * @ctrl: Control interface data from wpa_ctrl_open() |
| * Returns: 1 if there are pending messages, 0 if no, or -1 on error |
| * |
| * This function will check whether there are any pending control interface |
| * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is |
| * only used for event messages, i.e., wpa_ctrl_attach() must have been used to |
| * register the control interface as an event monitor. |
| */ |
| int wpa_ctrl_pending(struct wpa_ctrl *ctrl); |
| |
| |
| /** |
| * wpa_ctrl_get_fd - Get file descriptor used by the control interface |
| * @ctrl: Control interface data from wpa_ctrl_open() |
| * Returns: File descriptor used for the connection |
| * |
| * This function can be used to get the file descriptor that is used for the |
| * control interface connection. The returned value can be used, e.g., with |
| * select() while waiting for multiple events. |
| * |
| * The returned file descriptor must not be used directly for sending or |
| * receiving packets; instead, the library functions wpa_ctrl_request() and |
| * wpa_ctrl_recv() must be used for this. |
| */ |
| int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl); |
| |
| #ifdef ANDROID |
| /** |
| * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that |
| * may be left over from clients that were previously connected to |
| * wpa_supplicant. This keeps these files from being orphaned in the |
| * event of crashes that prevented them from being removed as part |
| * of the normal orderly shutdown. |
| */ |
| void wpa_ctrl_cleanup(void); |
| #endif /* ANDROID */ |
| |
| #ifdef CONFIG_CTRL_IFACE_UDP |
| /* Port range for multiple wpa_supplicant instances and multiple VIFs */ |
| #define WPA_CTRL_IFACE_PORT 9877 |
| #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */ |
| #define WPA_GLOBAL_CTRL_IFACE_PORT 9878 |
| #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */ |
| |
| char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl); |
| #endif /* CONFIG_CTRL_IFACE_UDP */ |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* WPA_CTRL_H */ |