| /* |
| * WPA Supplicant - Scanning |
| * Copyright (c) 2003-2019, Jouni Malinen <j@w1.fi> |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| */ |
| |
| #include "utils/includes.h" |
| |
| #include "utils/common.h" |
| #include "utils/eloop.h" |
| #include "common/ieee802_11_defs.h" |
| #include "common/wpa_ctrl.h" |
| #include "config.h" |
| #include "wpa_supplicant_i.h" |
| #include "driver_i.h" |
| #include "wps_supplicant.h" |
| #include "p2p_supplicant.h" |
| #include "p2p/p2p.h" |
| #include "hs20_supplicant.h" |
| #include "notify.h" |
| #include "bss.h" |
| #include "scan.h" |
| #include "mesh.h" |
| |
| |
| static void wpa_supplicant_gen_assoc_event(struct wpa_supplicant *wpa_s) |
| { |
| struct wpa_ssid *ssid; |
| union wpa_event_data data; |
| |
| ssid = wpa_supplicant_get_ssid(wpa_s); |
| if (ssid == NULL) |
| return; |
| |
| if (wpa_s->current_ssid == NULL) { |
| wpa_s->current_ssid = ssid; |
| wpas_notify_network_changed(wpa_s); |
| } |
| wpa_supplicant_initiate_eapol(wpa_s); |
| wpa_dbg(wpa_s, MSG_DEBUG, "Already associated with a configured " |
| "network - generating associated event"); |
| os_memset(&data, 0, sizeof(data)); |
| wpa_supplicant_event(wpa_s, EVENT_ASSOC, &data); |
| } |
| |
| |
| #ifdef CONFIG_WPS |
| static int wpas_wps_in_use(struct wpa_supplicant *wpa_s, |
| enum wps_request_type *req_type) |
| { |
| struct wpa_ssid *ssid; |
| int wps = 0; |
| |
| for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) { |
| if (!(ssid->key_mgmt & WPA_KEY_MGMT_WPS)) |
| continue; |
| |
| wps = 1; |
| *req_type = wpas_wps_get_req_type(ssid); |
| if (ssid->eap.phase1 && os_strstr(ssid->eap.phase1, "pbc=1")) |
| return 2; |
| } |
| |
| #ifdef CONFIG_P2P |
| if (!wpa_s->global->p2p_disabled && wpa_s->global->p2p && |
| !wpa_s->conf->p2p_disabled) { |
| wpa_s->wps->dev.p2p = 1; |
| if (!wps) { |
| wps = 1; |
| *req_type = WPS_REQ_ENROLLEE_INFO; |
| } |
| } |
| #endif /* CONFIG_P2P */ |
| |
| return wps; |
| } |
| #endif /* CONFIG_WPS */ |
| |
| |
| static int wpa_setup_mac_addr_rand_params(struct wpa_driver_scan_params *params, |
| const u8 *mac_addr) |
| { |
| u8 *tmp; |
| |
| if (params->mac_addr) { |
| params->mac_addr_mask = NULL; |
| os_free(params->mac_addr); |
| params->mac_addr = NULL; |
| } |
| |
| params->mac_addr_rand = 1; |
| |
| if (!mac_addr) |
| return 0; |
| |
| tmp = os_malloc(2 * ETH_ALEN); |
| if (!tmp) |
| return -1; |
| |
| os_memcpy(tmp, mac_addr, 2 * ETH_ALEN); |
| params->mac_addr = tmp; |
| params->mac_addr_mask = tmp + ETH_ALEN; |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_supplicant_enabled_networks - Check whether there are enabled networks |
| * @wpa_s: Pointer to wpa_supplicant data |
| * Returns: 0 if no networks are enabled, >0 if networks are enabled |
| * |
| * This function is used to figure out whether any networks (or Interworking |
| * with enabled credentials and auto_interworking) are present in the current |
| * configuration. |
| */ |
| int wpa_supplicant_enabled_networks(struct wpa_supplicant *wpa_s) |
| { |
| struct wpa_ssid *ssid = wpa_s->conf->ssid; |
| int count = 0, disabled = 0; |
| |
| if (wpa_s->p2p_mgmt) |
| return 0; /* no normal network profiles on p2p_mgmt interface */ |
| |
| while (ssid) { |
| if (!wpas_network_disabled(wpa_s, ssid)) |
| count++; |
| else |
| disabled++; |
| ssid = ssid->next; |
| } |
| if (wpa_s->conf->cred && wpa_s->conf->interworking && |
| wpa_s->conf->auto_interworking) |
| count++; |
| if (count == 0 && disabled > 0) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks (%d disabled " |
| "networks)", disabled); |
| } |
| return count; |
| } |
| |
| |
| static void wpa_supplicant_assoc_try(struct wpa_supplicant *wpa_s, |
| struct wpa_ssid *ssid) |
| { |
| int min_temp_disabled = 0; |
| |
| while (ssid) { |
| if (!wpas_network_disabled(wpa_s, ssid)) { |
| int temp_disabled = wpas_temp_disabled(wpa_s, ssid); |
| |
| if (temp_disabled <= 0) |
| break; |
| |
| if (!min_temp_disabled || |
| temp_disabled < min_temp_disabled) |
| min_temp_disabled = temp_disabled; |
| } |
| ssid = ssid->next; |
| } |
| |
| /* ap_scan=2 mode - try to associate with each SSID. */ |
| if (ssid == NULL) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "wpa_supplicant_assoc_try: Reached " |
| "end of scan list - go back to beginning"); |
| wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN; |
| wpa_supplicant_req_scan(wpa_s, min_temp_disabled, 0); |
| return; |
| } |
| if (ssid->next) { |
| /* Continue from the next SSID on the next attempt. */ |
| wpa_s->prev_scan_ssid = ssid; |
| } else { |
| /* Start from the beginning of the SSID list. */ |
| wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN; |
| } |
| wpa_supplicant_associate(wpa_s, NULL, ssid); |
| } |
| |
| |
| static void wpas_trigger_scan_cb(struct wpa_radio_work *work, int deinit) |
| { |
| struct wpa_supplicant *wpa_s = work->wpa_s; |
| struct wpa_driver_scan_params *params = work->ctx; |
| int ret; |
| |
| if (deinit) { |
| if (!work->started) { |
| wpa_scan_free_params(params); |
| return; |
| } |
| wpa_supplicant_notify_scanning(wpa_s, 0); |
| wpas_notify_scan_done(wpa_s, 0); |
| wpa_s->scan_work = NULL; |
| return; |
| } |
| |
| if ((wpa_s->mac_addr_rand_enable & MAC_ADDR_RAND_SCAN) && |
| wpa_s->wpa_state <= WPA_SCANNING) |
| wpa_setup_mac_addr_rand_params(params, wpa_s->mac_addr_scan); |
| |
| if (wpas_update_random_addr_disassoc(wpa_s) < 0) { |
| wpa_msg(wpa_s, MSG_INFO, |
| "Failed to assign random MAC address for a scan"); |
| wpa_scan_free_params(params); |
| wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_SCAN_FAILED "ret=-1"); |
| radio_work_done(work); |
| return; |
| } |
| |
| wpa_supplicant_notify_scanning(wpa_s, 1); |
| |
| if (wpa_s->clear_driver_scan_cache) { |
| wpa_printf(MSG_DEBUG, |
| "Request driver to clear scan cache due to local BSS flush"); |
| params->only_new_results = 1; |
| } |
| ret = wpa_drv_scan(wpa_s, params); |
| /* |
| * Store the obtained vendor scan cookie (if any) in wpa_s context. |
| * The current design is to allow only one scan request on each |
| * interface, hence having this scan cookie stored in wpa_s context is |
| * fine for now. |
| * |
| * Revisit this logic if concurrent scan operations per interface |
| * is supported. |
| */ |
| if (ret == 0) |
| wpa_s->curr_scan_cookie = params->scan_cookie; |
| wpa_scan_free_params(params); |
| work->ctx = NULL; |
| if (ret) { |
| int retry = wpa_s->last_scan_req != MANUAL_SCAN_REQ && |
| !wpa_s->beacon_rep_data.token; |
| |
| if (wpa_s->disconnected) |
| retry = 0; |
| |
| /* do not retry if operation is not supported */ |
| if (ret == -EOPNOTSUPP) |
| retry = 0; |
| |
| wpa_supplicant_notify_scanning(wpa_s, 0); |
| wpas_notify_scan_done(wpa_s, 0); |
| if (wpa_s->wpa_state == WPA_SCANNING) |
| wpa_supplicant_set_state(wpa_s, |
| wpa_s->scan_prev_wpa_state); |
| wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_SCAN_FAILED "ret=%d%s", |
| ret, retry ? " retry=1" : ""); |
| radio_work_done(work); |
| |
| if (retry) { |
| /* Restore scan_req since we will try to scan again */ |
| wpa_s->scan_req = wpa_s->last_scan_req; |
| wpa_supplicant_req_scan(wpa_s, 1, 0); |
| } else if (wpa_s->scan_res_handler) { |
| /* Clear the scan_res_handler */ |
| wpa_s->scan_res_handler = NULL; |
| } |
| |
| if (wpa_s->beacon_rep_data.token) |
| wpas_rrm_refuse_request(wpa_s); |
| |
| return; |
| } |
| |
| os_get_reltime(&wpa_s->scan_trigger_time); |
| wpa_s->scan_runs++; |
| wpa_s->normal_scans++; |
| wpa_s->own_scan_requested = 1; |
| wpa_s->clear_driver_scan_cache = 0; |
| wpa_s->scan_work = work; |
| } |
| |
| |
| /** |
| * wpa_supplicant_trigger_scan - Request driver to start a scan |
| * @wpa_s: Pointer to wpa_supplicant data |
| * @params: Scan parameters |
| * Returns: 0 on success, -1 on failure |
| */ |
| int wpa_supplicant_trigger_scan(struct wpa_supplicant *wpa_s, |
| struct wpa_driver_scan_params *params) |
| { |
| struct wpa_driver_scan_params *ctx; |
| |
| if (wpa_s->scan_work) { |
| wpa_dbg(wpa_s, MSG_INFO, "Reject scan trigger since one is already pending"); |
| return -1; |
| } |
| |
| ctx = wpa_scan_clone_params(params); |
| if (!ctx || |
| radio_add_work(wpa_s, 0, "scan", 0, wpas_trigger_scan_cb, ctx) < 0) |
| { |
| wpa_scan_free_params(ctx); |
| wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_SCAN_FAILED "ret=-1"); |
| return -1; |
| } |
| |
| wpa_s->wps_scan_done = false; |
| |
| return 0; |
| } |
| |
| |
| static void |
| wpa_supplicant_delayed_sched_scan_timeout(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct wpa_supplicant *wpa_s = eloop_ctx; |
| |
| wpa_dbg(wpa_s, MSG_DEBUG, "Starting delayed sched scan"); |
| |
| if (wpa_supplicant_req_sched_scan(wpa_s)) |
| wpa_supplicant_req_scan(wpa_s, 0, 0); |
| } |
| |
| |
| static void |
| wpa_supplicant_sched_scan_timeout(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct wpa_supplicant *wpa_s = eloop_ctx; |
| |
| wpa_dbg(wpa_s, MSG_DEBUG, "Sched scan timeout - stopping it"); |
| |
| wpa_s->sched_scan_timed_out = 1; |
| wpa_supplicant_cancel_sched_scan(wpa_s); |
| } |
| |
| |
| static int |
| wpa_supplicant_start_sched_scan(struct wpa_supplicant *wpa_s, |
| struct wpa_driver_scan_params *params) |
| { |
| int ret; |
| |
| wpa_supplicant_notify_scanning(wpa_s, 1); |
| ret = wpa_drv_sched_scan(wpa_s, params); |
| if (ret) |
| wpa_supplicant_notify_scanning(wpa_s, 0); |
| else |
| wpa_s->sched_scanning = 1; |
| |
| return ret; |
| } |
| |
| |
| static int wpa_supplicant_stop_sched_scan(struct wpa_supplicant *wpa_s) |
| { |
| int ret; |
| |
| ret = wpa_drv_stop_sched_scan(wpa_s); |
| if (ret) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "stopping sched_scan failed!"); |
| /* TODO: what to do if stopping fails? */ |
| return -1; |
| } |
| |
| return ret; |
| } |
| |
| |
| static struct wpa_driver_scan_filter * |
| wpa_supplicant_build_filter_ssids(struct wpa_config *conf, size_t *num_ssids) |
| { |
| struct wpa_driver_scan_filter *ssids; |
| struct wpa_ssid *ssid; |
| size_t count; |
| |
| *num_ssids = 0; |
| if (!conf->filter_ssids) |
| return NULL; |
| |
| for (count = 0, ssid = conf->ssid; ssid; ssid = ssid->next) { |
| if (ssid->ssid && ssid->ssid_len) |
| count++; |
| } |
| if (count == 0) |
| return NULL; |
| ssids = os_calloc(count, sizeof(struct wpa_driver_scan_filter)); |
| if (ssids == NULL) |
| return NULL; |
| |
| for (ssid = conf->ssid; ssid; ssid = ssid->next) { |
| if (!ssid->ssid || !ssid->ssid_len) |
| continue; |
| os_memcpy(ssids[*num_ssids].ssid, ssid->ssid, ssid->ssid_len); |
| ssids[*num_ssids].ssid_len = ssid->ssid_len; |
| (*num_ssids)++; |
| } |
| |
| return ssids; |
| } |
| |
| |
| #ifdef CONFIG_P2P |
| static bool is_6ghz_supported(struct wpa_supplicant *wpa_s) |
| { |
| struct hostapd_channel_data *chnl; |
| int i, j; |
| |
| for (i = 0; i < wpa_s->hw.num_modes; i++) { |
| if (wpa_s->hw.modes[i].mode == HOSTAPD_MODE_IEEE80211A) { |
| chnl = wpa_s->hw.modes[i].channels; |
| for (j = 0; j < wpa_s->hw.modes[i].num_channels; j++) { |
| if (chnl[j].flag & HOSTAPD_CHAN_DISABLED) |
| continue; |
| if (is_6ghz_freq(chnl[j].freq)) |
| return true; |
| } |
| } |
| } |
| |
| return false; |
| } |
| #endif /* CONFIG_P2P */ |
| |
| |
| static void wpa_supplicant_optimize_freqs( |
| struct wpa_supplicant *wpa_s, struct wpa_driver_scan_params *params) |
| { |
| #ifdef CONFIG_P2P |
| if (params->freqs == NULL && wpa_s->p2p_in_provisioning && |
| wpa_s->go_params) { |
| /* Optimize provisioning state scan based on GO information */ |
| if (wpa_s->p2p_in_provisioning < 5 && |
| wpa_s->go_params->freq > 0) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only GO " |
| "preferred frequency %d MHz", |
| wpa_s->go_params->freq); |
| params->freqs = os_calloc(2, sizeof(int)); |
| if (params->freqs) |
| params->freqs[0] = wpa_s->go_params->freq; |
| } else if (wpa_s->p2p_in_provisioning < 8 && |
| wpa_s->go_params->freq_list[0]) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only common " |
| "channels"); |
| int_array_concat(¶ms->freqs, |
| wpa_s->go_params->freq_list); |
| if (params->freqs) |
| int_array_sort_unique(params->freqs); |
| } |
| wpa_s->p2p_in_provisioning++; |
| } |
| |
| if (params->freqs == NULL && wpa_s->p2p_in_invitation) { |
| struct wpa_ssid *ssid = wpa_s->current_ssid; |
| |
| /* |
| * Perform a single-channel scan if the GO has already been |
| * discovered on another non-P2P interface. Note that a scan |
| * initiated by a P2P interface (e.g., the device interface) |
| * should already have sufficient IEs and scan results will be |
| * fetched on interface creation in that case. |
| */ |
| if (wpa_s->p2p_in_invitation == 1 && ssid) { |
| struct wpa_supplicant *ifs; |
| struct wpa_bss *bss = NULL; |
| const u8 *bssid = ssid->bssid_set ? ssid->bssid : NULL; |
| |
| dl_list_for_each(ifs, &wpa_s->radio->ifaces, |
| struct wpa_supplicant, radio_list) { |
| bss = wpa_bss_get(ifs, bssid, ssid->ssid, |
| ssid->ssid_len); |
| if (bss) |
| break; |
| } |
| if (bss && !disabled_freq(wpa_s, bss->freq)) { |
| params->freqs = os_calloc(2, sizeof(int)); |
| if (params->freqs) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "P2P: Scan only the known GO frequency %d MHz during invitation", |
| bss->freq); |
| params->freqs[0] = bss->freq; |
| } |
| } |
| } |
| |
| /* |
| * Optimize scan based on GO information during persistent |
| * group reinvocation |
| */ |
| if (!params->freqs && wpa_s->p2p_in_invitation < 5 && |
| wpa_s->p2p_invite_go_freq > 0) { |
| if (wpa_s->p2p_invite_go_freq == 2 || |
| wpa_s->p2p_invite_go_freq == 5) { |
| enum hostapd_hw_mode mode; |
| |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "P2P: Scan only GO preferred band %d GHz during invitation", |
| wpa_s->p2p_invite_go_freq); |
| |
| if (!wpa_s->hw.modes) |
| return; |
| mode = wpa_s->p2p_invite_go_freq == 5 ? |
| HOSTAPD_MODE_IEEE80211A : |
| HOSTAPD_MODE_IEEE80211G; |
| if (wpa_s->p2p_in_invitation <= 2) |
| wpa_add_scan_freqs_list(wpa_s, mode, |
| params, false, |
| false, true); |
| if (!params->freqs || params->freqs[0] == 0) |
| wpa_add_scan_freqs_list(wpa_s, mode, |
| params, false, |
| false, false); |
| } else { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "P2P: Scan only GO preferred frequency %d MHz during invitation", |
| wpa_s->p2p_invite_go_freq); |
| params->freqs = os_calloc(2, sizeof(int)); |
| if (params->freqs) |
| params->freqs[0] = |
| wpa_s->p2p_invite_go_freq; |
| } |
| } |
| wpa_s->p2p_in_invitation++; |
| if (wpa_s->p2p_in_invitation > 20) { |
| /* |
| * This should not really happen since the variable is |
| * cleared on group removal, but if it does happen, make |
| * sure we do not get stuck in special invitation scan |
| * mode. |
| */ |
| wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Clear p2p_in_invitation"); |
| wpa_s->p2p_in_invitation = 0; |
| wpa_s->p2p_retry_limit = 0; |
| } |
| } |
| #endif /* CONFIG_P2P */ |
| |
| #ifdef CONFIG_WPS |
| if (params->freqs == NULL && wpa_s->after_wps && wpa_s->wps_freq) { |
| /* |
| * Optimize post-provisioning scan based on channel used |
| * during provisioning. |
| */ |
| wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Scan only frequency %u MHz " |
| "that was used during provisioning", wpa_s->wps_freq); |
| params->freqs = os_calloc(2, sizeof(int)); |
| if (params->freqs) |
| params->freqs[0] = wpa_s->wps_freq; |
| wpa_s->after_wps--; |
| } else if (wpa_s->after_wps) |
| wpa_s->after_wps--; |
| |
| if (params->freqs == NULL && wpa_s->known_wps_freq && wpa_s->wps_freq) |
| { |
| /* Optimize provisioning scan based on already known channel */ |
| wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Scan only frequency %u MHz", |
| wpa_s->wps_freq); |
| params->freqs = os_calloc(2, sizeof(int)); |
| if (params->freqs) |
| params->freqs[0] = wpa_s->wps_freq; |
| wpa_s->known_wps_freq = 0; /* only do this once */ |
| } |
| #endif /* CONFIG_WPS */ |
| } |
| |
| |
| #ifdef CONFIG_INTERWORKING |
| static void wpas_add_interworking_elements(struct wpa_supplicant *wpa_s, |
| struct wpabuf *buf) |
| { |
| wpabuf_put_u8(buf, WLAN_EID_INTERWORKING); |
| wpabuf_put_u8(buf, is_zero_ether_addr(wpa_s->conf->hessid) ? 1 : |
| 1 + ETH_ALEN); |
| wpabuf_put_u8(buf, wpa_s->conf->access_network_type); |
| /* No Venue Info */ |
| if (!is_zero_ether_addr(wpa_s->conf->hessid)) |
| wpabuf_put_data(buf, wpa_s->conf->hessid, ETH_ALEN); |
| } |
| #endif /* CONFIG_INTERWORKING */ |
| |
| |
| #ifdef CONFIG_MBO |
| static void wpas_fils_req_param_add_max_channel(struct wpa_supplicant *wpa_s, |
| struct wpabuf **ie) |
| { |
| if (wpabuf_resize(ie, 5)) { |
| wpa_printf(MSG_DEBUG, |
| "Failed to allocate space for FILS Request Parameters element"); |
| return; |
| } |
| |
| /* FILS Request Parameters element */ |
| wpabuf_put_u8(*ie, WLAN_EID_EXTENSION); |
| wpabuf_put_u8(*ie, 3); /* FILS Request attribute length */ |
| wpabuf_put_u8(*ie, WLAN_EID_EXT_FILS_REQ_PARAMS); |
| /* Parameter control bitmap */ |
| wpabuf_put_u8(*ie, 0); |
| /* Max Channel Time field - contains the value of MaxChannelTime |
| * parameter of the MLME-SCAN.request primitive represented in units of |
| * TUs, as an unsigned integer. A Max Channel Time field value of 255 |
| * is used to indicate any duration of more than 254 TUs, or an |
| * unspecified or unknown duration. (IEEE Std 802.11ai-2016, 9.4.2.178) |
| */ |
| wpabuf_put_u8(*ie, 255); |
| } |
| #endif /* CONFIG_MBO */ |
| |
| |
| void wpa_supplicant_set_default_scan_ies(struct wpa_supplicant *wpa_s) |
| { |
| struct wpabuf *default_ies = NULL; |
| u8 ext_capab[18]; |
| int ext_capab_len, frame_id; |
| enum wpa_driver_if_type type = WPA_IF_STATION; |
| |
| #ifdef CONFIG_P2P |
| if (wpa_s->p2p_group_interface == P2P_GROUP_INTERFACE_CLIENT) |
| type = WPA_IF_P2P_CLIENT; |
| #endif /* CONFIG_P2P */ |
| |
| wpa_drv_get_ext_capa(wpa_s, type); |
| |
| ext_capab_len = wpas_build_ext_capab(wpa_s, ext_capab, |
| sizeof(ext_capab)); |
| if (ext_capab_len > 0 && |
| wpabuf_resize(&default_ies, ext_capab_len) == 0) |
| wpabuf_put_data(default_ies, ext_capab, ext_capab_len); |
| |
| #ifdef CONFIG_MBO |
| if (wpa_s->enable_oce & OCE_STA) |
| wpas_fils_req_param_add_max_channel(wpa_s, &default_ies); |
| /* Send MBO and OCE capabilities */ |
| if (wpabuf_resize(&default_ies, 12) == 0) |
| wpas_mbo_scan_ie(wpa_s, default_ies); |
| #endif /* CONFIG_MBO */ |
| |
| if (type == WPA_IF_P2P_CLIENT) |
| frame_id = VENDOR_ELEM_PROBE_REQ_P2P; |
| else |
| frame_id = VENDOR_ELEM_PROBE_REQ; |
| |
| if (wpa_s->vendor_elem[frame_id]) { |
| size_t len; |
| |
| len = wpabuf_len(wpa_s->vendor_elem[frame_id]); |
| if (len > 0 && wpabuf_resize(&default_ies, len) == 0) |
| wpabuf_put_buf(default_ies, |
| wpa_s->vendor_elem[frame_id]); |
| } |
| |
| if (default_ies) |
| wpa_drv_set_default_scan_ies(wpa_s, wpabuf_head(default_ies), |
| wpabuf_len(default_ies)); |
| wpabuf_free(default_ies); |
| } |
| |
| |
| static struct wpabuf * wpa_supplicant_extra_ies(struct wpa_supplicant *wpa_s) |
| { |
| struct wpabuf *extra_ie = NULL; |
| u8 ext_capab[18]; |
| int ext_capab_len; |
| #ifdef CONFIG_WPS |
| int wps = 0; |
| enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO; |
| #endif /* CONFIG_WPS */ |
| |
| #ifdef CONFIG_P2P |
| if (wpa_s->p2p_group_interface == P2P_GROUP_INTERFACE_CLIENT) |
| wpa_drv_get_ext_capa(wpa_s, WPA_IF_P2P_CLIENT); |
| else |
| #endif /* CONFIG_P2P */ |
| wpa_drv_get_ext_capa(wpa_s, WPA_IF_STATION); |
| |
| ext_capab_len = wpas_build_ext_capab(wpa_s, ext_capab, |
| sizeof(ext_capab)); |
| if (ext_capab_len > 0 && |
| wpabuf_resize(&extra_ie, ext_capab_len) == 0) |
| wpabuf_put_data(extra_ie, ext_capab, ext_capab_len); |
| |
| #ifdef CONFIG_INTERWORKING |
| if (wpa_s->conf->interworking && |
| wpabuf_resize(&extra_ie, 100) == 0) |
| wpas_add_interworking_elements(wpa_s, extra_ie); |
| #endif /* CONFIG_INTERWORKING */ |
| |
| #ifdef CONFIG_MBO |
| if (wpa_s->enable_oce & OCE_STA) |
| wpas_fils_req_param_add_max_channel(wpa_s, &extra_ie); |
| #endif /* CONFIG_MBO */ |
| |
| #ifdef CONFIG_WPS |
| wps = wpas_wps_in_use(wpa_s, &req_type); |
| |
| if (wps) { |
| struct wpabuf *wps_ie; |
| wps_ie = wps_build_probe_req_ie(wps == 2 ? DEV_PW_PUSHBUTTON : |
| DEV_PW_DEFAULT, |
| &wpa_s->wps->dev, |
| wpa_s->wps->uuid, req_type, |
| 0, NULL); |
| if (wps_ie) { |
| if (wpabuf_resize(&extra_ie, wpabuf_len(wps_ie)) == 0) |
| wpabuf_put_buf(extra_ie, wps_ie); |
| wpabuf_free(wps_ie); |
| } |
| } |
| |
| #ifdef CONFIG_P2P |
| if (wps) { |
| size_t ielen = p2p_scan_ie_buf_len(wpa_s->global->p2p); |
| if (wpabuf_resize(&extra_ie, ielen) == 0) |
| wpas_p2p_scan_ie(wpa_s, extra_ie); |
| } |
| #endif /* CONFIG_P2P */ |
| |
| wpa_supplicant_mesh_add_scan_ie(wpa_s, &extra_ie); |
| |
| #endif /* CONFIG_WPS */ |
| |
| #ifdef CONFIG_HS20 |
| if (wpa_s->conf->hs20 && wpabuf_resize(&extra_ie, 9) == 0) |
| wpas_hs20_add_indication(extra_ie, -1, 0); |
| #endif /* CONFIG_HS20 */ |
| |
| #ifdef CONFIG_FST |
| if (wpa_s->fst_ies && |
| wpabuf_resize(&extra_ie, wpabuf_len(wpa_s->fst_ies)) == 0) |
| wpabuf_put_buf(extra_ie, wpa_s->fst_ies); |
| #endif /* CONFIG_FST */ |
| |
| #ifdef CONFIG_MBO |
| /* Send MBO and OCE capabilities */ |
| if (wpabuf_resize(&extra_ie, 12) == 0) |
| wpas_mbo_scan_ie(wpa_s, extra_ie); |
| #endif /* CONFIG_MBO */ |
| |
| if (wpa_s->vendor_elem[VENDOR_ELEM_PROBE_REQ]) { |
| struct wpabuf *buf = wpa_s->vendor_elem[VENDOR_ELEM_PROBE_REQ]; |
| |
| if (wpabuf_resize(&extra_ie, wpabuf_len(buf)) == 0) |
| wpabuf_put_buf(extra_ie, buf); |
| } |
| |
| return extra_ie; |
| } |
| |
| |
| #ifdef CONFIG_P2P |
| |
| /* |
| * Check whether there are any enabled networks or credentials that could be |
| * used for a non-P2P connection. |
| */ |
| static int non_p2p_network_enabled(struct wpa_supplicant *wpa_s) |
| { |
| struct wpa_ssid *ssid; |
| |
| for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) { |
| if (wpas_network_disabled(wpa_s, ssid)) |
| continue; |
| if (!ssid->p2p_group) |
| return 1; |
| } |
| |
| if (wpa_s->conf->cred && wpa_s->conf->interworking && |
| wpa_s->conf->auto_interworking) |
| return 1; |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_P2P */ |
| |
| |
| int wpa_add_scan_freqs_list(struct wpa_supplicant *wpa_s, |
| enum hostapd_hw_mode band, |
| struct wpa_driver_scan_params *params, |
| bool is_6ghz, bool only_6ghz_psc, |
| bool exclude_radar) |
| { |
| /* Include only supported channels for the specified band */ |
| struct hostapd_hw_modes *mode; |
| int num_chans = 0; |
| int *freqs, i; |
| |
| mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, band, is_6ghz); |
| if (!mode || !mode->num_channels) |
| return -1; |
| |
| if (params->freqs) { |
| while (params->freqs[num_chans]) |
| num_chans++; |
| } |
| |
| freqs = os_realloc(params->freqs, |
| (num_chans + mode->num_channels + 1) * sizeof(int)); |
| if (!freqs) |
| return -1; |
| |
| params->freqs = freqs; |
| for (i = 0; i < mode->num_channels; i++) { |
| if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED) |
| continue; |
| if (exclude_radar && |
| (mode->channels[i].flag & HOSTAPD_CHAN_RADAR)) |
| continue; |
| |
| if (is_6ghz && only_6ghz_psc && |
| !is_6ghz_psc_frequency(mode->channels[i].freq)) |
| continue; |
| |
| params->freqs[num_chans++] = mode->channels[i].freq; |
| } |
| params->freqs[num_chans] = 0; |
| |
| return 0; |
| } |
| |
| |
| static void wpa_setband_scan_freqs(struct wpa_supplicant *wpa_s, |
| struct wpa_driver_scan_params *params) |
| { |
| if (wpa_s->hw.modes == NULL) |
| return; /* unknown what channels the driver supports */ |
| if (params->freqs) |
| return; /* already using a limited channel set */ |
| |
| if (wpa_s->setband_mask & WPA_SETBAND_5G) |
| wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A, params, |
| false, false, false); |
| if (wpa_s->setband_mask & WPA_SETBAND_2G) |
| wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G, params, |
| false, false, false); |
| if (wpa_s->setband_mask & WPA_SETBAND_6G) |
| wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A, params, |
| true, false, false); |
| } |
| |
| |
| static void wpa_add_scan_ssid(struct wpa_supplicant *wpa_s, |
| struct wpa_driver_scan_params *params, |
| size_t max_ssids, const u8 *ssid, size_t ssid_len) |
| { |
| unsigned int j; |
| |
| for (j = 0; j < params->num_ssids; j++) { |
| if (params->ssids[j].ssid_len == ssid_len && |
| params->ssids[j].ssid && |
| os_memcmp(params->ssids[j].ssid, ssid, ssid_len) == 0) |
| return; /* already in the list */ |
| } |
| |
| if (params->num_ssids + 1 > max_ssids) { |
| wpa_printf(MSG_DEBUG, "Over max scan SSIDs for manual request"); |
| return; |
| } |
| |
| wpa_printf(MSG_DEBUG, "Scan SSID (manual request): %s", |
| wpa_ssid_txt(ssid, ssid_len)); |
| |
| params->ssids[params->num_ssids].ssid = ssid; |
| params->ssids[params->num_ssids].ssid_len = ssid_len; |
| params->num_ssids++; |
| } |
| |
| |
| static void wpa_add_owe_scan_ssid(struct wpa_supplicant *wpa_s, |
| struct wpa_driver_scan_params *params, |
| struct wpa_ssid *ssid, size_t max_ssids) |
| { |
| #ifdef CONFIG_OWE |
| struct wpa_bss *bss; |
| |
| if (!(ssid->key_mgmt & WPA_KEY_MGMT_OWE)) |
| return; |
| |
| wpa_printf(MSG_DEBUG, "OWE: Look for transition mode AP. ssid=%s", |
| wpa_ssid_txt(ssid->ssid, ssid->ssid_len)); |
| |
| dl_list_for_each(bss, &wpa_s->bss, struct wpa_bss, list) { |
| const u8 *owe, *pos, *end; |
| const u8 *owe_ssid; |
| size_t owe_ssid_len; |
| |
| if (bss->ssid_len != ssid->ssid_len || |
| os_memcmp(bss->ssid, ssid->ssid, ssid->ssid_len) != 0) |
| continue; |
| |
| owe = wpa_bss_get_vendor_ie(bss, OWE_IE_VENDOR_TYPE); |
| if (!owe || owe[1] < 4) |
| continue; |
| |
| pos = owe + 6; |
| end = owe + 2 + owe[1]; |
| |
| /* Must include BSSID and ssid_len */ |
| if (end - pos < ETH_ALEN + 1) |
| return; |
| |
| /* Skip BSSID */ |
| pos += ETH_ALEN; |
| owe_ssid_len = *pos++; |
| owe_ssid = pos; |
| |
| if ((size_t) (end - pos) < owe_ssid_len || |
| owe_ssid_len > SSID_MAX_LEN) |
| return; |
| |
| wpa_printf(MSG_DEBUG, |
| "OWE: scan_ssids: transition mode OWE ssid=%s", |
| wpa_ssid_txt(owe_ssid, owe_ssid_len)); |
| |
| wpa_add_scan_ssid(wpa_s, params, max_ssids, |
| owe_ssid, owe_ssid_len); |
| return; |
| } |
| #endif /* CONFIG_OWE */ |
| } |
| |
| |
| static void wpa_set_scan_ssids(struct wpa_supplicant *wpa_s, |
| struct wpa_driver_scan_params *params, |
| size_t max_ssids) |
| { |
| unsigned int i; |
| struct wpa_ssid *ssid; |
| |
| /* |
| * For devices with max_ssids greater than 1, leave the last slot empty |
| * for adding the wildcard scan entry. |
| */ |
| max_ssids = max_ssids > 1 ? max_ssids - 1 : max_ssids; |
| |
| for (i = 0; i < wpa_s->scan_id_count; i++) { |
| ssid = wpa_config_get_network(wpa_s->conf, wpa_s->scan_id[i]); |
| if (!ssid) |
| continue; |
| if (ssid->scan_ssid) |
| wpa_add_scan_ssid(wpa_s, params, max_ssids, |
| ssid->ssid, ssid->ssid_len); |
| /* |
| * Also add the SSID of the OWE BSS, to allow discovery of |
| * transition mode APs more quickly. |
| */ |
| wpa_add_owe_scan_ssid(wpa_s, params, ssid, max_ssids); |
| } |
| |
| wpa_s->scan_id_count = 0; |
| } |
| |
| |
| static int wpa_set_ssids_from_scan_req(struct wpa_supplicant *wpa_s, |
| struct wpa_driver_scan_params *params, |
| size_t max_ssids) |
| { |
| unsigned int i; |
| |
| if (wpa_s->ssids_from_scan_req == NULL || |
| wpa_s->num_ssids_from_scan_req == 0) |
| return 0; |
| |
| if (wpa_s->num_ssids_from_scan_req > max_ssids) { |
| wpa_s->num_ssids_from_scan_req = max_ssids; |
| wpa_printf(MSG_DEBUG, "Over max scan SSIDs from scan req: %u", |
| (unsigned int) max_ssids); |
| } |
| |
| for (i = 0; i < wpa_s->num_ssids_from_scan_req; i++) { |
| params->ssids[i].ssid = wpa_s->ssids_from_scan_req[i].ssid; |
| params->ssids[i].ssid_len = |
| wpa_s->ssids_from_scan_req[i].ssid_len; |
| wpa_hexdump_ascii(MSG_DEBUG, "specific SSID", |
| params->ssids[i].ssid, |
| params->ssids[i].ssid_len); |
| } |
| |
| params->num_ssids = wpa_s->num_ssids_from_scan_req; |
| wpa_s->num_ssids_from_scan_req = 0; |
| return 1; |
| } |
| |
| |
| static void wpa_supplicant_scan(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct wpa_supplicant *wpa_s = eloop_ctx; |
| struct wpa_ssid *ssid; |
| int ret, p2p_in_prog; |
| struct wpabuf *extra_ie = NULL; |
| struct wpa_driver_scan_params params; |
| struct wpa_driver_scan_params *scan_params; |
| size_t max_ssids; |
| int connect_without_scan = 0; |
| |
| wpa_s->ignore_post_flush_scan_res = 0; |
| |
| if (wpa_s->wpa_state == WPA_INTERFACE_DISABLED) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Skip scan - interface disabled"); |
| return; |
| } |
| |
| if (wpa_s->disconnected && wpa_s->scan_req == NORMAL_SCAN_REQ) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Disconnected - do not scan"); |
| wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED); |
| return; |
| } |
| |
| if (wpa_s->scanning) { |
| /* |
| * If we are already in scanning state, we shall reschedule the |
| * the incoming scan request. |
| */ |
| wpa_dbg(wpa_s, MSG_DEBUG, "Already scanning - Reschedule the incoming scan req"); |
| wpa_supplicant_req_scan(wpa_s, 1, 0); |
| return; |
| } |
| |
| if (!wpa_supplicant_enabled_networks(wpa_s) && |
| wpa_s->scan_req == NORMAL_SCAN_REQ) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks - do not scan"); |
| wpa_supplicant_set_state(wpa_s, WPA_INACTIVE); |
| return; |
| } |
| |
| if (wpa_s->conf->ap_scan != 0 && |
| (wpa_s->drv_flags & WPA_DRIVER_FLAGS_WIRED)) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Using wired authentication - " |
| "overriding ap_scan configuration"); |
| wpa_s->conf->ap_scan = 0; |
| wpas_notify_ap_scan_changed(wpa_s); |
| } |
| |
| if (wpa_s->conf->ap_scan == 0) { |
| wpa_supplicant_gen_assoc_event(wpa_s); |
| return; |
| } |
| |
| ssid = NULL; |
| if (wpa_s->scan_req != MANUAL_SCAN_REQ && |
| wpa_s->connect_without_scan) { |
| connect_without_scan = 1; |
| for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) { |
| if (ssid == wpa_s->connect_without_scan) |
| break; |
| } |
| } |
| |
| p2p_in_prog = wpas_p2p_in_progress(wpa_s); |
| if (p2p_in_prog && p2p_in_prog != 2 && |
| (!ssid || |
| (ssid->mode != WPAS_MODE_AP && ssid->mode != WPAS_MODE_P2P_GO))) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Delay station mode scan while P2P operation is in progress"); |
| wpa_supplicant_req_scan(wpa_s, 5, 0); |
| return; |
| } |
| |
| /* |
| * Don't cancel the scan based on ongoing PNO; defer it. Some scans are |
| * used for changing modes inside wpa_supplicant (roaming, |
| * auto-reconnect, etc). Discarding the scan might hurt these processes. |
| * The normal use case for PNO is to suspend the host immediately after |
| * starting PNO, so the periodic 100 ms attempts to run the scan do not |
| * normally happen in practice multiple times, i.e., this is simply |
| * restarting scanning once the host is woken up and PNO stopped. |
| */ |
| if (wpa_s->pno || wpa_s->pno_sched_pending) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Defer scan - PNO is in progress"); |
| wpa_supplicant_req_scan(wpa_s, 0, 100000); |
| return; |
| } |
| |
| if (wpa_s->conf->ap_scan == 2) |
| max_ssids = 1; |
| else { |
| max_ssids = wpa_s->max_scan_ssids; |
| if (max_ssids > WPAS_MAX_SCAN_SSIDS) |
| max_ssids = WPAS_MAX_SCAN_SSIDS; |
| } |
| |
| wpa_s->last_scan_req = wpa_s->scan_req; |
| wpa_s->scan_req = NORMAL_SCAN_REQ; |
| |
| if (connect_without_scan) { |
| wpa_s->connect_without_scan = NULL; |
| if (ssid) { |
| wpa_printf(MSG_DEBUG, "Start a pre-selected network " |
| "without scan step"); |
| wpa_supplicant_associate(wpa_s, NULL, ssid); |
| return; |
| } |
| } |
| |
| os_memset(¶ms, 0, sizeof(params)); |
| |
| wpa_s->scan_prev_wpa_state = wpa_s->wpa_state; |
| if (wpa_s->wpa_state == WPA_DISCONNECTED || |
| wpa_s->wpa_state == WPA_INACTIVE) |
| wpa_supplicant_set_state(wpa_s, WPA_SCANNING); |
| |
| /* |
| * If autoscan has set its own scanning parameters |
| */ |
| if (wpa_s->autoscan_params != NULL) { |
| scan_params = wpa_s->autoscan_params; |
| goto scan; |
| } |
| |
| if (wpa_s->last_scan_req == MANUAL_SCAN_REQ && |
| wpa_set_ssids_from_scan_req(wpa_s, ¶ms, max_ssids)) { |
| wpa_printf(MSG_DEBUG, "Use specific SSIDs from SCAN command"); |
| goto ssid_list_set; |
| } |
| |
| #ifdef CONFIG_P2P |
| if ((wpa_s->p2p_in_provisioning || wpa_s->show_group_started) && |
| wpa_s->go_params && !wpa_s->conf->passive_scan) { |
| wpa_printf(MSG_DEBUG, "P2P: Use specific SSID for scan during P2P group formation (p2p_in_provisioning=%d show_group_started=%d)", |
| wpa_s->p2p_in_provisioning, |
| wpa_s->show_group_started); |
| params.ssids[0].ssid = wpa_s->go_params->ssid; |
| params.ssids[0].ssid_len = wpa_s->go_params->ssid_len; |
| params.num_ssids = 1; |
| goto ssid_list_set; |
| } |
| |
| if (wpa_s->p2p_in_invitation) { |
| if (wpa_s->current_ssid) { |
| wpa_printf(MSG_DEBUG, "P2P: Use specific SSID for scan during invitation"); |
| params.ssids[0].ssid = wpa_s->current_ssid->ssid; |
| params.ssids[0].ssid_len = |
| wpa_s->current_ssid->ssid_len; |
| params.num_ssids = 1; |
| } else { |
| wpa_printf(MSG_DEBUG, "P2P: No specific SSID known for scan during invitation"); |
| } |
| goto ssid_list_set; |
| } |
| #endif /* CONFIG_P2P */ |
| |
| /* Find the starting point from which to continue scanning */ |
| ssid = wpa_s->conf->ssid; |
| if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) { |
| while (ssid) { |
| if (ssid == wpa_s->prev_scan_ssid) { |
| ssid = ssid->next; |
| break; |
| } |
| ssid = ssid->next; |
| } |
| } |
| |
| if (wpa_s->last_scan_req != MANUAL_SCAN_REQ && |
| #ifdef CONFIG_AP |
| !wpa_s->ap_iface && |
| #endif /* CONFIG_AP */ |
| wpa_s->conf->ap_scan == 2) { |
| wpa_s->connect_without_scan = NULL; |
| wpa_s->prev_scan_wildcard = 0; |
| wpa_supplicant_assoc_try(wpa_s, ssid); |
| return; |
| } else if (wpa_s->conf->ap_scan == 2) { |
| /* |
| * User-initiated scan request in ap_scan == 2; scan with |
| * wildcard SSID. |
| */ |
| ssid = NULL; |
| } else if (wpa_s->reattach && wpa_s->current_ssid != NULL) { |
| /* |
| * Perform single-channel single-SSID scan for |
| * reassociate-to-same-BSS operation. |
| */ |
| /* Setup SSID */ |
| ssid = wpa_s->current_ssid; |
| wpa_hexdump_ascii(MSG_DEBUG, "Scan SSID", |
| ssid->ssid, ssid->ssid_len); |
| params.ssids[0].ssid = ssid->ssid; |
| params.ssids[0].ssid_len = ssid->ssid_len; |
| params.num_ssids = 1; |
| |
| /* |
| * Allocate memory for frequency array, allocate one extra |
| * slot for the zero-terminator. |
| */ |
| params.freqs = os_malloc(sizeof(int) * 2); |
| if (params.freqs) { |
| params.freqs[0] = wpa_s->assoc_freq; |
| params.freqs[1] = 0; |
| } |
| |
| /* |
| * Reset the reattach flag so that we fall back to full scan if |
| * this scan fails. |
| */ |
| wpa_s->reattach = 0; |
| } else { |
| struct wpa_ssid *start = ssid, *tssid; |
| int freqs_set = 0; |
| if (ssid == NULL && max_ssids > 1) |
| ssid = wpa_s->conf->ssid; |
| while (ssid) { |
| if (!wpas_network_disabled(wpa_s, ssid) && |
| ssid->scan_ssid) { |
| wpa_hexdump_ascii(MSG_DEBUG, "Scan SSID", |
| ssid->ssid, ssid->ssid_len); |
| params.ssids[params.num_ssids].ssid = |
| ssid->ssid; |
| params.ssids[params.num_ssids].ssid_len = |
| ssid->ssid_len; |
| params.num_ssids++; |
| if (params.num_ssids + 1 >= max_ssids) |
| break; |
| } |
| |
| if (!wpas_network_disabled(wpa_s, ssid)) { |
| /* |
| * Also add the SSID of the OWE BSS, to allow |
| * discovery of transition mode APs more |
| * quickly. |
| */ |
| wpa_add_owe_scan_ssid(wpa_s, ¶ms, ssid, |
| max_ssids); |
| } |
| |
| ssid = ssid->next; |
| if (ssid == start) |
| break; |
| if (ssid == NULL && max_ssids > 1 && |
| start != wpa_s->conf->ssid) |
| ssid = wpa_s->conf->ssid; |
| } |
| |
| if (wpa_s->scan_id_count && |
| wpa_s->last_scan_req == MANUAL_SCAN_REQ) |
| wpa_set_scan_ssids(wpa_s, ¶ms, max_ssids); |
| |
| for (tssid = wpa_s->conf->ssid; |
| wpa_s->last_scan_req != MANUAL_SCAN_REQ && tssid; |
| tssid = tssid->next) { |
| if (wpas_network_disabled(wpa_s, tssid)) |
| continue; |
| if (((params.freqs || !freqs_set) && |
| tssid->scan_freq) && |
| int_array_len(params.freqs) < 100) { |
| int_array_concat(¶ms.freqs, |
| tssid->scan_freq); |
| } else { |
| os_free(params.freqs); |
| params.freqs = NULL; |
| } |
| freqs_set = 1; |
| } |
| int_array_sort_unique(params.freqs); |
| } |
| |
| if (ssid && max_ssids == 1) { |
| /* |
| * If the driver is limited to 1 SSID at a time interleave |
| * wildcard SSID scans with specific SSID scans to avoid |
| * waiting a long time for a wildcard scan. |
| */ |
| if (!wpa_s->prev_scan_wildcard) { |
| params.ssids[0].ssid = NULL; |
| params.ssids[0].ssid_len = 0; |
| wpa_s->prev_scan_wildcard = 1; |
| wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for " |
| "wildcard SSID (Interleave with specific)"); |
| } else { |
| wpa_s->prev_scan_ssid = ssid; |
| wpa_s->prev_scan_wildcard = 0; |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Starting AP scan for specific SSID: %s", |
| wpa_ssid_txt(ssid->ssid, ssid->ssid_len)); |
| } |
| } else if (ssid) { |
| /* max_ssids > 1 */ |
| |
| wpa_s->prev_scan_ssid = ssid; |
| wpa_dbg(wpa_s, MSG_DEBUG, "Include wildcard SSID in " |
| "the scan request"); |
| params.num_ssids++; |
| } else if (wpa_s->last_scan_req == MANUAL_SCAN_REQ && |
| wpa_s->manual_scan_passive && params.num_ssids == 0) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Use passive scan based on manual request"); |
| } else if (wpa_s->conf->passive_scan) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Use passive scan based on configuration"); |
| } else { |
| wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN; |
| params.num_ssids++; |
| wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for wildcard " |
| "SSID"); |
| } |
| |
| ssid_list_set: |
| wpa_supplicant_optimize_freqs(wpa_s, ¶ms); |
| extra_ie = wpa_supplicant_extra_ies(wpa_s); |
| |
| if (wpa_s->last_scan_req == MANUAL_SCAN_REQ && |
| wpa_s->manual_scan_only_new) { |
| wpa_printf(MSG_DEBUG, |
| "Request driver to clear scan cache due to manual only_new=1 scan"); |
| params.only_new_results = 1; |
| } |
| |
| if (wpa_s->last_scan_req == MANUAL_SCAN_REQ && params.freqs == NULL && |
| wpa_s->manual_scan_freqs) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Limit manual scan to specified channels"); |
| params.freqs = wpa_s->manual_scan_freqs; |
| wpa_s->manual_scan_freqs = NULL; |
| } |
| |
| if (params.freqs == NULL && wpa_s->select_network_scan_freqs) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Limit select_network scan to specified channels"); |
| params.freqs = wpa_s->select_network_scan_freqs; |
| wpa_s->select_network_scan_freqs = NULL; |
| } |
| |
| if (params.freqs == NULL && wpa_s->next_scan_freqs) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Optimize scan based on previously " |
| "generated frequency list"); |
| params.freqs = wpa_s->next_scan_freqs; |
| } else |
| os_free(wpa_s->next_scan_freqs); |
| wpa_s->next_scan_freqs = NULL; |
| wpa_setband_scan_freqs(wpa_s, ¶ms); |
| |
| /* See if user specified frequencies. If so, scan only those. */ |
| if (wpa_s->last_scan_req == INITIAL_SCAN_REQ && |
| wpa_s->conf->initial_freq_list && !params.freqs) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Optimize scan based on conf->initial_freq_list"); |
| int_array_concat(¶ms.freqs, wpa_s->conf->initial_freq_list); |
| } else if (wpa_s->conf->freq_list && !params.freqs) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Optimize scan based on conf->freq_list"); |
| int_array_concat(¶ms.freqs, wpa_s->conf->freq_list); |
| } |
| |
| /* Use current associated channel? */ |
| if (wpa_s->conf->scan_cur_freq && !params.freqs) { |
| unsigned int num = wpa_s->num_multichan_concurrent; |
| |
| params.freqs = os_calloc(num + 1, sizeof(int)); |
| if (params.freqs) { |
| num = get_shared_radio_freqs(wpa_s, params.freqs, num, |
| false); |
| if (num > 0) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Scan only the " |
| "current operating channels since " |
| "scan_cur_freq is enabled"); |
| } else { |
| os_free(params.freqs); |
| params.freqs = NULL; |
| } |
| } |
| } |
| |
| #ifdef CONFIG_MBO |
| if (wpa_s->enable_oce & OCE_STA) |
| params.oce_scan = 1; |
| #endif /* CONFIG_MBO */ |
| |
| params.filter_ssids = wpa_supplicant_build_filter_ssids( |
| wpa_s->conf, ¶ms.num_filter_ssids); |
| if (extra_ie) { |
| params.extra_ies = wpabuf_head(extra_ie); |
| params.extra_ies_len = wpabuf_len(extra_ie); |
| } |
| |
| #ifdef CONFIG_P2P |
| if (wpa_s->p2p_in_provisioning || wpa_s->p2p_in_invitation || |
| (wpa_s->show_group_started && wpa_s->go_params)) { |
| /* |
| * The interface may not yet be in P2P mode, so we have to |
| * explicitly request P2P probe to disable CCK rates. |
| */ |
| params.p2p_probe = 1; |
| } |
| #endif /* CONFIG_P2P */ |
| |
| if ((wpa_s->mac_addr_rand_enable & MAC_ADDR_RAND_SCAN) && |
| wpa_s->wpa_state <= WPA_SCANNING) |
| wpa_setup_mac_addr_rand_params(¶ms, wpa_s->mac_addr_scan); |
| |
| if (!is_zero_ether_addr(wpa_s->next_scan_bssid)) { |
| struct wpa_bss *bss; |
| |
| params.bssid = wpa_s->next_scan_bssid; |
| bss = wpa_bss_get_bssid_latest(wpa_s, params.bssid); |
| if (!wpa_s->next_scan_bssid_wildcard_ssid && |
| bss && bss->ssid_len && params.num_ssids == 1 && |
| params.ssids[0].ssid_len == 0) { |
| params.ssids[0].ssid = bss->ssid; |
| params.ssids[0].ssid_len = bss->ssid_len; |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Scan a previously specified BSSID " MACSTR |
| " and SSID %s", |
| MAC2STR(params.bssid), |
| wpa_ssid_txt(bss->ssid, bss->ssid_len)); |
| } else { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Scan a previously specified BSSID " MACSTR, |
| MAC2STR(params.bssid)); |
| } |
| } |
| |
| if (wpa_s->last_scan_req == MANUAL_SCAN_REQ && |
| wpa_s->manual_non_coloc_6ghz) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Collocated 6 GHz logic is disabled"); |
| params.non_coloc_6ghz = 1; |
| } |
| |
| scan_params = ¶ms; |
| |
| scan: |
| #ifdef CONFIG_P2P |
| /* |
| * If the driver does not support multi-channel concurrency and a |
| * virtual interface that shares the same radio with the wpa_s interface |
| * is operating there may not be need to scan other channels apart from |
| * the current operating channel on the other virtual interface. Filter |
| * out other channels in case we are trying to find a connection for a |
| * station interface when we are not configured to prefer station |
| * connection and a concurrent operation is already in process. |
| */ |
| if (wpa_s->scan_for_connection && |
| wpa_s->last_scan_req == NORMAL_SCAN_REQ && |
| !scan_params->freqs && !params.freqs && |
| wpas_is_p2p_prioritized(wpa_s) && |
| wpa_s->p2p_group_interface == NOT_P2P_GROUP_INTERFACE && |
| non_p2p_network_enabled(wpa_s)) { |
| unsigned int num = wpa_s->num_multichan_concurrent; |
| |
| params.freqs = os_calloc(num + 1, sizeof(int)); |
| if (params.freqs) { |
| /* |
| * Exclude the operating frequency of the current |
| * interface since we're looking to transition off of |
| * it. |
| */ |
| num = get_shared_radio_freqs(wpa_s, params.freqs, num, |
| true); |
| if (num > 0 && num == wpa_s->num_multichan_concurrent) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Scan only the current operating channels since all channels are already used"); |
| } else { |
| os_free(params.freqs); |
| params.freqs = NULL; |
| } |
| } |
| } |
| |
| if (!params.freqs && is_6ghz_supported(wpa_s) && |
| (wpa_s->p2p_in_invitation || wpa_s->p2p_in_provisioning)) |
| wpas_p2p_scan_freqs(wpa_s, ¶ms, true); |
| #endif /* CONFIG_P2P */ |
| |
| ret = wpa_supplicant_trigger_scan(wpa_s, scan_params); |
| |
| if (ret && wpa_s->last_scan_req == MANUAL_SCAN_REQ && params.freqs && |
| !wpa_s->manual_scan_freqs) { |
| /* Restore manual_scan_freqs for the next attempt */ |
| wpa_s->manual_scan_freqs = params.freqs; |
| params.freqs = NULL; |
| } |
| |
| wpabuf_free(extra_ie); |
| os_free(params.freqs); |
| os_free(params.filter_ssids); |
| os_free(params.mac_addr); |
| |
| if (ret) { |
| wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate AP scan"); |
| if (wpa_s->scan_prev_wpa_state != wpa_s->wpa_state) |
| wpa_supplicant_set_state(wpa_s, |
| wpa_s->scan_prev_wpa_state); |
| /* Restore scan_req since we will try to scan again */ |
| wpa_s->scan_req = wpa_s->last_scan_req; |
| wpa_supplicant_req_scan(wpa_s, 1, 0); |
| } else { |
| wpa_s->scan_for_connection = 0; |
| #ifdef CONFIG_INTERWORKING |
| wpa_s->interworking_fast_assoc_tried = 0; |
| #endif /* CONFIG_INTERWORKING */ |
| wpa_s->next_scan_bssid_wildcard_ssid = 0; |
| if (params.bssid) |
| os_memset(wpa_s->next_scan_bssid, 0, ETH_ALEN); |
| } |
| } |
| |
| |
| void wpa_supplicant_update_scan_int(struct wpa_supplicant *wpa_s, int sec) |
| { |
| struct os_reltime remaining, new_int; |
| int cancelled; |
| |
| cancelled = eloop_cancel_timeout_one(wpa_supplicant_scan, wpa_s, NULL, |
| &remaining); |
| |
| new_int.sec = sec; |
| new_int.usec = 0; |
| if (cancelled && os_reltime_before(&remaining, &new_int)) { |
| new_int.sec = remaining.sec; |
| new_int.usec = remaining.usec; |
| } |
| |
| if (cancelled) { |
| eloop_register_timeout(new_int.sec, new_int.usec, |
| wpa_supplicant_scan, wpa_s, NULL); |
| } |
| wpa_s->scan_interval = sec; |
| } |
| |
| |
| /** |
| * wpa_supplicant_req_scan - Schedule a scan for neighboring access points |
| * @wpa_s: Pointer to wpa_supplicant data |
| * @sec: Number of seconds after which to scan |
| * @usec: Number of microseconds after which to scan |
| * |
| * This function is used to schedule a scan for neighboring access points after |
| * the specified time. |
| */ |
| void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec) |
| { |
| int res; |
| |
| if (wpa_s->p2p_mgmt) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Ignore scan request (%d.%06d sec) on p2p_mgmt interface", |
| sec, usec); |
| return; |
| } |
| |
| res = eloop_deplete_timeout(sec, usec, wpa_supplicant_scan, wpa_s, |
| NULL); |
| if (res == 1) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Rescheduling scan request: %d.%06d sec", |
| sec, usec); |
| } else if (res == 0) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Ignore new scan request for %d.%06d sec since an earlier request is scheduled to trigger sooner", |
| sec, usec); |
| } else { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Setting scan request: %d.%06d sec", |
| sec, usec); |
| eloop_register_timeout(sec, usec, wpa_supplicant_scan, wpa_s, NULL); |
| } |
| } |
| |
| |
| /** |
| * wpa_supplicant_delayed_sched_scan - Request a delayed scheduled scan |
| * @wpa_s: Pointer to wpa_supplicant data |
| * @sec: Number of seconds after which to scan |
| * @usec: Number of microseconds after which to scan |
| * Returns: 0 on success or -1 otherwise |
| * |
| * This function is used to schedule periodic scans for neighboring |
| * access points after the specified time. |
| */ |
| int wpa_supplicant_delayed_sched_scan(struct wpa_supplicant *wpa_s, |
| int sec, int usec) |
| { |
| if (!wpa_s->sched_scan_supported) |
| return -1; |
| |
| eloop_register_timeout(sec, usec, |
| wpa_supplicant_delayed_sched_scan_timeout, |
| wpa_s, NULL); |
| |
| return 0; |
| } |
| |
| |
| static void |
| wpa_scan_set_relative_rssi_params(struct wpa_supplicant *wpa_s, |
| struct wpa_driver_scan_params *params) |
| { |
| if (wpa_s->wpa_state != WPA_COMPLETED || |
| !(wpa_s->drv_flags & WPA_DRIVER_FLAGS_SCHED_SCAN_RELATIVE_RSSI) || |
| wpa_s->srp.relative_rssi_set == 0) |
| return; |
| |
| params->relative_rssi_set = 1; |
| params->relative_rssi = wpa_s->srp.relative_rssi; |
| |
| if (wpa_s->srp.relative_adjust_rssi == 0) |
| return; |
| |
| params->relative_adjust_band = wpa_s->srp.relative_adjust_band; |
| params->relative_adjust_rssi = wpa_s->srp.relative_adjust_rssi; |
| } |
| |
| |
| /** |
| * wpa_supplicant_req_sched_scan - Start a periodic scheduled scan |
| * @wpa_s: Pointer to wpa_supplicant data |
| * Returns: 0 is sched_scan was started or -1 otherwise |
| * |
| * This function is used to schedule periodic scans for neighboring |
| * access points repeating the scan continuously. |
| */ |
| int wpa_supplicant_req_sched_scan(struct wpa_supplicant *wpa_s) |
| { |
| struct wpa_driver_scan_params params; |
| struct wpa_driver_scan_params *scan_params; |
| enum wpa_states prev_state; |
| struct wpa_ssid *ssid = NULL; |
| struct wpabuf *extra_ie = NULL; |
| int ret; |
| unsigned int max_sched_scan_ssids; |
| int wildcard = 0; |
| int need_ssids; |
| struct sched_scan_plan scan_plan; |
| |
| if (!wpa_s->sched_scan_supported) |
| return -1; |
| |
| if (wpa_s->max_sched_scan_ssids > WPAS_MAX_SCAN_SSIDS) |
| max_sched_scan_ssids = WPAS_MAX_SCAN_SSIDS; |
| else |
| max_sched_scan_ssids = wpa_s->max_sched_scan_ssids; |
| if (max_sched_scan_ssids < 1 || wpa_s->conf->disable_scan_offload) |
| return -1; |
| |
| wpa_s->sched_scan_stop_req = 0; |
| |
| if (wpa_s->sched_scanning) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Already sched scanning"); |
| return 0; |
| } |
| |
| need_ssids = 0; |
| for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) { |
| if (!wpas_network_disabled(wpa_s, ssid) && !ssid->scan_ssid) { |
| /* Use wildcard SSID to find this network */ |
| wildcard = 1; |
| } else if (!wpas_network_disabled(wpa_s, ssid) && |
| ssid->ssid_len) |
| need_ssids++; |
| |
| #ifdef CONFIG_WPS |
| if (!wpas_network_disabled(wpa_s, ssid) && |
| ssid->key_mgmt == WPA_KEY_MGMT_WPS) { |
| /* |
| * Normal scan is more reliable and faster for WPS |
| * operations and since these are for short periods of |
| * time, the benefit of trying to use sched_scan would |
| * be limited. |
| */ |
| wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of " |
| "sched_scan for WPS"); |
| return -1; |
| } |
| #endif /* CONFIG_WPS */ |
| } |
| if (wildcard) |
| need_ssids++; |
| |
| if (wpa_s->normal_scans < 3 && |
| (need_ssids <= wpa_s->max_scan_ssids || |
| wpa_s->max_scan_ssids >= (int) max_sched_scan_ssids)) { |
| /* |
| * When normal scan can speed up operations, use that for the |
| * first operations before starting the sched_scan to allow |
| * user space sleep more. We do this only if the normal scan |
| * has functionality that is suitable for this or if the |
| * sched_scan does not have better support for multiple SSIDs. |
| */ |
| wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of " |
| "sched_scan for initial scans (normal_scans=%d)", |
| wpa_s->normal_scans); |
| return -1; |
| } |
| |
| os_memset(¶ms, 0, sizeof(params)); |
| |
| /* If we can't allocate space for the filters, we just don't filter */ |
| params.filter_ssids = os_calloc(wpa_s->max_match_sets, |
| sizeof(struct wpa_driver_scan_filter)); |
| |
| prev_state = wpa_s->wpa_state; |
| if (wpa_s->wpa_state == WPA_DISCONNECTED || |
| wpa_s->wpa_state == WPA_INACTIVE) |
| wpa_supplicant_set_state(wpa_s, WPA_SCANNING); |
| |
| if (wpa_s->autoscan_params != NULL) { |
| scan_params = wpa_s->autoscan_params; |
| goto scan; |
| } |
| |
| /* Find the starting point from which to continue scanning */ |
| ssid = wpa_s->conf->ssid; |
| if (wpa_s->prev_sched_ssid) { |
| while (ssid) { |
| if (ssid == wpa_s->prev_sched_ssid) { |
| ssid = ssid->next; |
| break; |
| } |
| ssid = ssid->next; |
| } |
| } |
| |
| if (!ssid || !wpa_s->prev_sched_ssid) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Beginning of SSID list"); |
| wpa_s->sched_scan_timeout = max_sched_scan_ssids * 2; |
| wpa_s->first_sched_scan = 1; |
| ssid = wpa_s->conf->ssid; |
| wpa_s->prev_sched_ssid = ssid; |
| } |
| |
| if (wildcard) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Add wildcard SSID to sched_scan"); |
| params.num_ssids++; |
| } |
| |
| while (ssid) { |
| if (wpas_network_disabled(wpa_s, ssid)) |
| goto next; |
| |
| if (params.num_filter_ssids < wpa_s->max_match_sets && |
| params.filter_ssids && ssid->ssid && ssid->ssid_len) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "add to filter ssid: %s", |
| wpa_ssid_txt(ssid->ssid, ssid->ssid_len)); |
| os_memcpy(params.filter_ssids[params.num_filter_ssids].ssid, |
| ssid->ssid, ssid->ssid_len); |
| params.filter_ssids[params.num_filter_ssids].ssid_len = |
| ssid->ssid_len; |
| params.num_filter_ssids++; |
| } else if (params.filter_ssids && ssid->ssid && ssid->ssid_len) |
| { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Not enough room for SSID " |
| "filter for sched_scan - drop filter"); |
| os_free(params.filter_ssids); |
| params.filter_ssids = NULL; |
| params.num_filter_ssids = 0; |
| } |
| |
| if (ssid->scan_ssid && ssid->ssid && ssid->ssid_len) { |
| if (params.num_ssids == max_sched_scan_ssids) |
| break; /* only room for broadcast SSID */ |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "add to active scan ssid: %s", |
| wpa_ssid_txt(ssid->ssid, ssid->ssid_len)); |
| params.ssids[params.num_ssids].ssid = |
| ssid->ssid; |
| params.ssids[params.num_ssids].ssid_len = |
| ssid->ssid_len; |
| params.num_ssids++; |
| if (params.num_ssids >= max_sched_scan_ssids) { |
| wpa_s->prev_sched_ssid = ssid; |
| do { |
| ssid = ssid->next; |
| } while (ssid && |
| (wpas_network_disabled(wpa_s, ssid) || |
| !ssid->scan_ssid)); |
| break; |
| } |
| } |
| |
| next: |
| wpa_s->prev_sched_ssid = ssid; |
| ssid = ssid->next; |
| } |
| |
| if (params.num_filter_ssids == 0) { |
| os_free(params.filter_ssids); |
| params.filter_ssids = NULL; |
| } |
| |
| extra_ie = wpa_supplicant_extra_ies(wpa_s); |
| if (extra_ie) { |
| params.extra_ies = wpabuf_head(extra_ie); |
| params.extra_ies_len = wpabuf_len(extra_ie); |
| } |
| |
| if (wpa_s->conf->filter_rssi) |
| params.filter_rssi = wpa_s->conf->filter_rssi; |
| |
| /* See if user specified frequencies. If so, scan only those. */ |
| if (wpa_s->conf->freq_list && !params.freqs) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Optimize scan based on conf->freq_list"); |
| int_array_concat(¶ms.freqs, wpa_s->conf->freq_list); |
| } |
| |
| #ifdef CONFIG_MBO |
| if (wpa_s->enable_oce & OCE_STA) |
| params.oce_scan = 1; |
| #endif /* CONFIG_MBO */ |
| |
| scan_params = ¶ms; |
| |
| scan: |
| wpa_s->sched_scan_timed_out = 0; |
| |
| /* |
| * We cannot support multiple scan plans if the scan request includes |
| * too many SSID's, so in this case use only the last scan plan and make |
| * it run infinitely. It will be stopped by the timeout. |
| */ |
| if (wpa_s->sched_scan_plans_num == 1 || |
| (wpa_s->sched_scan_plans_num && !ssid && wpa_s->first_sched_scan)) { |
| params.sched_scan_plans = wpa_s->sched_scan_plans; |
| params.sched_scan_plans_num = wpa_s->sched_scan_plans_num; |
| } else if (wpa_s->sched_scan_plans_num > 1) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Too many SSIDs. Default to using single scheduled_scan plan"); |
| params.sched_scan_plans = |
| &wpa_s->sched_scan_plans[wpa_s->sched_scan_plans_num - |
| 1]; |
| params.sched_scan_plans_num = 1; |
| } else { |
| if (wpa_s->conf->sched_scan_interval) |
| scan_plan.interval = wpa_s->conf->sched_scan_interval; |
| else |
| scan_plan.interval = 10; |
| |
| if (scan_plan.interval > wpa_s->max_sched_scan_plan_interval) { |
| wpa_printf(MSG_WARNING, |
| "Scan interval too long(%u), use the maximum allowed(%u)", |
| scan_plan.interval, |
| wpa_s->max_sched_scan_plan_interval); |
| scan_plan.interval = |
| wpa_s->max_sched_scan_plan_interval; |
| } |
| |
| scan_plan.iterations = 0; |
| params.sched_scan_plans = &scan_plan; |
| params.sched_scan_plans_num = 1; |
| } |
| |
| params.sched_scan_start_delay = wpa_s->conf->sched_scan_start_delay; |
| |
| if (ssid || !wpa_s->first_sched_scan) { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Starting sched scan after %u seconds: interval %u timeout %d", |
| params.sched_scan_start_delay, |
| params.sched_scan_plans[0].interval, |
| wpa_s->sched_scan_timeout); |
| } else { |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Starting sched scan after %u seconds (no timeout)", |
| params.sched_scan_start_delay); |
| } |
| |
| wpa_setband_scan_freqs(wpa_s, scan_params); |
| |
| if ((wpa_s->mac_addr_rand_enable & MAC_ADDR_RAND_SCHED_SCAN) && |
| wpa_s->wpa_state <= WPA_SCANNING) |
| wpa_setup_mac_addr_rand_params(¶ms, |
| wpa_s->mac_addr_sched_scan); |
| |
| wpa_scan_set_relative_rssi_params(wpa_s, scan_params); |
| |
| ret = wpa_supplicant_start_sched_scan(wpa_s, scan_params); |
| wpabuf_free(extra_ie); |
| os_free(params.filter_ssids); |
| os_free(params.mac_addr); |
| if (ret) { |
| wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate sched scan"); |
| if (prev_state != wpa_s->wpa_state) |
| wpa_supplicant_set_state(wpa_s, prev_state); |
| return ret; |
| } |
| |
| /* If we have more SSIDs to scan, add a timeout so we scan them too */ |
| if (ssid || !wpa_s->first_sched_scan) { |
| wpa_s->sched_scan_timed_out = 0; |
| eloop_register_timeout(wpa_s->sched_scan_timeout, 0, |
| wpa_supplicant_sched_scan_timeout, |
| wpa_s, NULL); |
| wpa_s->first_sched_scan = 0; |
| wpa_s->sched_scan_timeout /= 2; |
| params.sched_scan_plans[0].interval *= 2; |
| if ((unsigned int) wpa_s->sched_scan_timeout < |
| params.sched_scan_plans[0].interval || |
| params.sched_scan_plans[0].interval > |
| wpa_s->max_sched_scan_plan_interval) { |
| params.sched_scan_plans[0].interval = 10; |
| wpa_s->sched_scan_timeout = max_sched_scan_ssids * 2; |
| } |
| } |
| |
| /* If there is no more ssids, start next time from the beginning */ |
| if (!ssid) |
| wpa_s->prev_sched_ssid = NULL; |
| |
| return 0; |
| } |
| |
| |
| /** |
| * wpa_supplicant_cancel_scan - Cancel a scheduled scan request |
| * @wpa_s: Pointer to wpa_supplicant data |
| * |
| * This function is used to cancel a scan request scheduled with |
| * wpa_supplicant_req_scan(). |
| */ |
| void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s) |
| { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling scan request"); |
| eloop_cancel_timeout(wpa_supplicant_scan, wpa_s, NULL); |
| } |
| |
| |
| /** |
| * wpa_supplicant_cancel_delayed_sched_scan - Stop a delayed scheduled scan |
| * @wpa_s: Pointer to wpa_supplicant data |
| * |
| * This function is used to stop a delayed scheduled scan. |
| */ |
| void wpa_supplicant_cancel_delayed_sched_scan(struct wpa_supplicant *wpa_s) |
| { |
| if (!wpa_s->sched_scan_supported) |
| return; |
| |
| wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling delayed sched scan"); |
| eloop_cancel_timeout(wpa_supplicant_delayed_sched_scan_timeout, |
| wpa_s, NULL); |
| } |
| |
| |
| /** |
| * wpa_supplicant_cancel_sched_scan - Stop running scheduled scans |
| * @wpa_s: Pointer to wpa_supplicant data |
| * |
| * This function is used to stop a periodic scheduled scan. |
| */ |
| void wpa_supplicant_cancel_sched_scan(struct wpa_supplicant *wpa_s) |
| { |
| if (!wpa_s->sched_scanning) |
| return; |
| |
| if (wpa_s->sched_scanning) |
| wpa_s->sched_scan_stop_req = 1; |
| |
| wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling sched scan"); |
| eloop_cancel_timeout(wpa_supplicant_sched_scan_timeout, wpa_s, NULL); |
| wpa_supplicant_stop_sched_scan(wpa_s); |
| } |
| |
| |
| /** |
| * wpa_supplicant_notify_scanning - Indicate possible scan state change |
| * @wpa_s: Pointer to wpa_supplicant data |
| * @scanning: Whether scanning is currently in progress |
| * |
| * This function is to generate scanning notifycations. It is called whenever |
| * there may have been a change in scanning (scan started, completed, stopped). |
| * wpas_notify_scanning() is called whenever the scanning state changed from the |
| * previously notified state. |
| */ |
| void wpa_supplicant_notify_scanning(struct wpa_supplicant *wpa_s, |
| int scanning) |
| { |
| if (wpa_s->scanning != scanning) { |
| wpa_s->scanning = scanning; |
| wpas_notify_scanning(wpa_s); |
| } |
| } |
| |
| |
| static int wpa_scan_get_max_rate(const struct wpa_scan_res *res) |
| { |
| int rate = 0; |
| const u8 *ie; |
| int i; |
| |
| ie = wpa_scan_get_ie(res, WLAN_EID_SUPP_RATES); |
| for (i = 0; ie && i < ie[1]; i++) { |
| if ((ie[i + 2] & 0x7f) > rate) |
| rate = ie[i + 2] & 0x7f; |
| } |
| |
| ie = wpa_scan_get_ie(res, WLAN_EID_EXT_SUPP_RATES); |
| for (i = 0; ie && i < ie[1]; i++) { |
| if ((ie[i + 2] & 0x7f) > rate) |
| rate = ie[i + 2] & 0x7f; |
| } |
| |
| return rate; |
| } |
| |
| |
| /** |
| * wpa_scan_get_ie - Fetch a specified information element from a scan result |
| * @res: Scan result entry |
| * @ie: Information element identitifier (WLAN_EID_*) |
| * Returns: Pointer to the information element (id field) or %NULL if not found |
| * |
| * This function returns the first matching information element in the scan |
| * result. |
| */ |
| const u8 * wpa_scan_get_ie(const struct wpa_scan_res *res, u8 ie) |
| { |
| size_t ie_len = res->ie_len; |
| |
| /* Use the Beacon frame IEs if res->ie_len is not available */ |
| if (!ie_len) |
| ie_len = res->beacon_ie_len; |
| |
| return get_ie((const u8 *) (res + 1), ie_len, ie); |
| } |
| |
| |
| const u8 * wpa_scan_get_ml_ie(const struct wpa_scan_res *res, u8 type) |
| { |
| size_t ie_len = res->ie_len; |
| |
| /* Use the Beacon frame IEs if res->ie_len is not available */ |
| if (!ie_len) |
| ie_len = res->beacon_ie_len; |
| |
| return get_ml_ie((const u8 *) (res + 1), ie_len, type); |
| } |
| |
| |
| /** |
| * wpa_scan_get_vendor_ie - Fetch vendor information element from a scan result |
| * @res: Scan result entry |
| * @vendor_type: Vendor type (four octets starting the IE payload) |
| * Returns: Pointer to the information element (id field) or %NULL if not found |
| * |
| * This function returns the first matching information element in the scan |
| * result. |
| */ |
| const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res, |
| u32 vendor_type) |
| { |
| const u8 *ies; |
| const struct element *elem; |
| |
| ies = (const u8 *) (res + 1); |
| |
| for_each_element_id(elem, WLAN_EID_VENDOR_SPECIFIC, ies, res->ie_len) { |
| if (elem->datalen >= 4 && |
| vendor_type == WPA_GET_BE32(elem->data)) |
| return &elem->id; |
| } |
| |
| return NULL; |
| } |
| |
| |
| /** |
| * wpa_scan_get_vendor_ie_beacon - Fetch vendor information from a scan result |
| * @res: Scan result entry |
| * @vendor_type: Vendor type (four octets starting the IE payload) |
| * Returns: Pointer to the information element (id field) or %NULL if not found |
| * |
| * This function returns the first matching information element in the scan |
| * result. |
| * |
| * This function is like wpa_scan_get_vendor_ie(), but uses IE buffer only |
| * from Beacon frames instead of either Beacon or Probe Response frames. |
| */ |
| const u8 * wpa_scan_get_vendor_ie_beacon(const struct wpa_scan_res *res, |
| u32 vendor_type) |
| { |
| const u8 *ies; |
| const struct element *elem; |
| |
| if (res->beacon_ie_len == 0) |
| return NULL; |
| |
| ies = (const u8 *) (res + 1); |
| ies += res->ie_len; |
| |
| for_each_element_id(elem, WLAN_EID_VENDOR_SPECIFIC, ies, |
| res->beacon_ie_len) { |
| if (elem->datalen >= 4 && |
| vendor_type == WPA_GET_BE32(elem->data)) |
| return &elem->id; |
| } |
| |
| return NULL; |
| } |
| |
| |
| /** |
| * wpa_scan_get_vendor_ie_multi - Fetch vendor IE data from a scan result |
| * @res: Scan result entry |
| * @vendor_type: Vendor type (four octets starting the IE payload) |
| * Returns: Pointer to the information element payload or %NULL if not found |
| * |
| * This function returns concatenated payload of possibly fragmented vendor |
| * specific information elements in the scan result. The caller is responsible |
| * for freeing the returned buffer. |
| */ |
| struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res, |
| u32 vendor_type) |
| { |
| struct wpabuf *buf; |
| const u8 *end, *pos; |
| |
| buf = wpabuf_alloc(res->ie_len); |
| if (buf == NULL) |
| return NULL; |
| |
| pos = (const u8 *) (res + 1); |
| end = pos + res->ie_len; |
| |
| while (end - pos > 1) { |
| u8 ie, len; |
| |
| ie = pos[0]; |
| len = pos[1]; |
| if (len > end - pos - 2) |
| break; |
| pos += 2; |
| if (ie == WLAN_EID_VENDOR_SPECIFIC && len >= 4 && |
| vendor_type == WPA_GET_BE32(pos)) |
| wpabuf_put_data(buf, pos + 4, len - 4); |
| pos += len; |
| } |
| |
| if (wpabuf_len(buf) == 0) { |
| wpabuf_free(buf); |
| buf = NULL; |
| } |
| |
| return buf; |
| } |
| |
| |
| /* Compare function for sorting scan results. Return >0 if @b is considered |
| * better. */ |
| static int wpa_scan_result_compar(const void *a, const void *b) |
| { |
| #define MIN(a,b) a < b ? a : b |
| struct wpa_scan_res **_wa = (void *) a; |
| struct wpa_scan_res **_wb = (void *) b; |
| struct wpa_scan_res *wa = *_wa; |
| struct wpa_scan_res *wb = *_wb; |
| int wpa_a, wpa_b; |
| int snr_a, snr_b, snr_a_full, snr_b_full; |
| |
| /* WPA/WPA2 support preferred */ |
| wpa_a = wpa_scan_get_vendor_ie(wa, WPA_IE_VENDOR_TYPE) != NULL || |
| wpa_scan_get_ie(wa, WLAN_EID_RSN) != NULL; |
| wpa_b = wpa_scan_get_vendor_ie(wb, WPA_IE_VENDOR_TYPE) != NULL || |
| wpa_scan_get_ie(wb, WLAN_EID_RSN) != NULL; |
| |
| if (wpa_b && !wpa_a) |
| return 1; |
| if (!wpa_b && wpa_a) |
| return -1; |
| |
| /* privacy support preferred */ |
| if ((wa->caps & IEEE80211_CAP_PRIVACY) == 0 && |
| (wb->caps & IEEE80211_CAP_PRIVACY)) |
| return 1; |
| if ((wa->caps & IEEE80211_CAP_PRIVACY) && |
| (wb->caps & IEEE80211_CAP_PRIVACY) == 0) |
| return -1; |
| |
| if (wa->flags & wb->flags & WPA_SCAN_LEVEL_DBM) { |
| snr_a_full = wa->snr; |
| snr_a = MIN(wa->snr, GREAT_SNR); |
| snr_b_full = wb->snr; |
| snr_b = MIN(wb->snr, GREAT_SNR); |
| } else { |
| /* Level is not in dBm, so we can't calculate |
| * SNR. Just use raw level (units unknown). */ |
| snr_a = snr_a_full = wa->level; |
| snr_b = snr_b_full = wb->level; |
| } |
| |
| /* If SNR is close, decide by max rate or frequency band. For cases |
| * involving the 6 GHz band, use the throughput estimate irrespective |
| * of the SNR difference since the LPI/VLP rules may result in |
| * significant differences in SNR for cases where the estimated |
| * throughput can be considerably higher with the lower SNR. */ |
| if (snr_a && snr_b && (abs(snr_b - snr_a) < 7 || |
| is_6ghz_freq(wa->freq) || |
| is_6ghz_freq(wb->freq))) { |
| if (wa->est_throughput != wb->est_throughput) |
| return (int) wb->est_throughput - |
| (int) wa->est_throughput; |
| } |
| if ((snr_a && snr_b && abs(snr_b - snr_a) < 5) || |
| (wa->qual && wb->qual && abs(wb->qual - wa->qual) < 10)) { |
| if (is_6ghz_freq(wa->freq) ^ is_6ghz_freq(wb->freq)) |
| return is_6ghz_freq(wa->freq) ? -1 : 1; |
| if (IS_5GHZ(wa->freq) ^ IS_5GHZ(wb->freq)) |
| return IS_5GHZ(wa->freq) ? -1 : 1; |
| } |
| |
| /* all things being equal, use SNR; if SNRs are |
| * identical, use quality values since some drivers may only report |
| * that value and leave the signal level zero */ |
| if (snr_b_full == snr_a_full) |
| return wb->qual - wa->qual; |
| return snr_b_full - snr_a_full; |
| #undef MIN |
| } |
| |
| |
| #ifdef CONFIG_WPS |
| /* Compare function for sorting scan results when searching a WPS AP for |
| * provisioning. Return >0 if @b is considered better. */ |
| static int wpa_scan_result_wps_compar(const void *a, const void *b) |
| { |
| struct wpa_scan_res **_wa = (void *) a; |
| struct wpa_scan_res **_wb = (void *) b; |
| struct wpa_scan_res *wa = *_wa; |
| struct wpa_scan_res *wb = *_wb; |
| int uses_wps_a, uses_wps_b; |
| struct wpabuf *wps_a, *wps_b; |
| int res; |
| |
| /* Optimization - check WPS IE existence before allocated memory and |
| * doing full reassembly. */ |
| uses_wps_a = wpa_scan_get_vendor_ie(wa, WPS_IE_VENDOR_TYPE) != NULL; |
| uses_wps_b = wpa_scan_get_vendor_ie(wb, WPS_IE_VENDOR_TYPE) != NULL; |
| if (uses_wps_a && !uses_wps_b) |
| return -1; |
| if (!uses_wps_a && uses_wps_b) |
| return 1; |
| |
| if (uses_wps_a && uses_wps_b) { |
| wps_a = wpa_scan_get_vendor_ie_multi(wa, WPS_IE_VENDOR_TYPE); |
| wps_b = wpa_scan_get_vendor_ie_multi(wb, WPS_IE_VENDOR_TYPE); |
| res = wps_ap_priority_compar(wps_a, wps_b); |
| wpabuf_free(wps_a); |
| wpabuf_free(wps_b); |
| if (res) |
| return res; |
| } |
| |
| /* |
| * Do not use current AP security policy as a sorting criteria during |
| * WPS provisioning step since the AP may get reconfigured at the |
| * completion of provisioning. |
| */ |
| |
| /* all things being equal, use signal level; if signal levels are |
| * identical, use quality values since some drivers may only report |
| * that value and leave the signal level zero */ |
| if (wb->level == wa->level) |
| return wb->qual - wa->qual; |
| return wb->level - wa->level; |
| } |
| #endif /* CONFIG_WPS */ |
| |
| |
| static void dump_scan_res(struct wpa_scan_results *scan_res) |
| { |
| #ifndef CONFIG_NO_STDOUT_DEBUG |
| size_t i; |
| |
| if (scan_res->res == NULL || scan_res->num == 0) |
| return; |
| |
| wpa_printf(MSG_EXCESSIVE, "Sorted scan results"); |
| |
| for (i = 0; i < scan_res->num; i++) { |
| struct wpa_scan_res *r = scan_res->res[i]; |
| u8 *pos; |
| const u8 *ssid_ie, *ssid = NULL; |
| size_t ssid_len = 0; |
| |
| ssid_ie = wpa_scan_get_ie(r, WLAN_EID_SSID); |
| if (ssid_ie) { |
| ssid = ssid_ie + 2; |
| ssid_len = ssid_ie[1]; |
| } |
| |
| if (r->flags & WPA_SCAN_LEVEL_DBM) { |
| int noise_valid = !(r->flags & WPA_SCAN_NOISE_INVALID); |
| |
| wpa_printf(MSG_EXCESSIVE, MACSTR |
| " ssid=%s freq=%d qual=%d noise=%d%s level=%d snr=%d%s flags=0x%x age=%u est=%u", |
| MAC2STR(r->bssid), |
| wpa_ssid_txt(ssid, ssid_len), |
| r->freq, r->qual, |
| r->noise, noise_valid ? "" : "~", r->level, |
| r->snr, r->snr >= GREAT_SNR ? "*" : "", |
| r->flags, |
| r->age, r->est_throughput); |
| } else { |
| wpa_printf(MSG_EXCESSIVE, MACSTR |
| " ssid=%s freq=%d qual=%d noise=%d level=%d flags=0x%x age=%u est=%u", |
| MAC2STR(r->bssid), |
| wpa_ssid_txt(ssid, ssid_len), |
| r->freq, r->qual, |
| r->noise, r->level, r->flags, r->age, |
| r->est_throughput); |
| } |
| pos = (u8 *) (r + 1); |
| if (r->ie_len) |
| wpa_hexdump(MSG_EXCESSIVE, "IEs", pos, r->ie_len); |
| pos += r->ie_len; |
| if (r->beacon_ie_len) |
| wpa_hexdump(MSG_EXCESSIVE, "Beacon IEs", |
| pos, r->beacon_ie_len); |
| } |
| #endif /* CONFIG_NO_STDOUT_DEBUG */ |
| } |
| |
| |
| /** |
| * wpa_supplicant_filter_bssid_match - Is the specified BSSID allowed |
| * @wpa_s: Pointer to wpa_supplicant data |
| * @bssid: BSSID to check |
| * Returns: 0 if the BSSID is filtered or 1 if not |
| * |
| * This function is used to filter out specific BSSIDs from scan reslts mainly |
| * for testing purposes (SET bssid_filter ctrl_iface command). |
| */ |
| int wpa_supplicant_filter_bssid_match(struct wpa_supplicant *wpa_s, |
| const u8 *bssid) |
| { |
| size_t i; |
| |
| if (wpa_s->bssid_filter == NULL) |
| return 1; |
| |
| for (i = 0; i < wpa_s->bssid_filter_count; i++) { |
| if (os_memcmp(wpa_s->bssid_filter + i * ETH_ALEN, bssid, |
| ETH_ALEN) == 0) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| |
| void filter_scan_res(struct wpa_supplicant *wpa_s, |
| struct wpa_scan_results *res) |
| { |
| size_t i, j; |
| |
| if (wpa_s->bssid_filter == NULL) |
| return; |
| |
| for (i = 0, j = 0; i < res->num; i++) { |
| if (wpa_supplicant_filter_bssid_match(wpa_s, |
| res->res[i]->bssid)) { |
| res->res[j++] = res->res[i]; |
| } else { |
| os_free(res->res[i]); |
| res->res[i] = NULL; |
| } |
| } |
| |
| if (res->num != j) { |
| wpa_printf(MSG_DEBUG, "Filtered out %d scan results", |
| (int) (res->num - j)); |
| res->num = j; |
| } |
| } |
| |
| |
| void scan_snr(struct wpa_scan_res *res) |
| { |
| if (res->flags & WPA_SCAN_NOISE_INVALID) { |
| res->noise = is_6ghz_freq(res->freq) ? |
| DEFAULT_NOISE_FLOOR_6GHZ : |
| (IS_5GHZ(res->freq) ? |
| DEFAULT_NOISE_FLOOR_5GHZ : DEFAULT_NOISE_FLOOR_2GHZ); |
| } |
| |
| if (res->flags & WPA_SCAN_LEVEL_DBM) { |
| res->snr = res->level - res->noise; |
| } else { |
| /* Level is not in dBm, so we can't calculate |
| * SNR. Just use raw level (units unknown). */ |
| res->snr = res->level; |
| } |
| } |
| |
| |
| /* Minimum SNR required to achieve a certain bitrate. */ |
| struct minsnr_bitrate_entry { |
| int minsnr; |
| unsigned int bitrate; /* in Mbps */ |
| }; |
| |
| /* VHT needs to be enabled in order to achieve MCS8 and MCS9 rates. */ |
| static const int vht_mcs = 8; |
| |
| static const struct minsnr_bitrate_entry vht20_table[] = { |
| { 0, 0 }, |
| { 2, 6500 }, /* HT20 MCS0 */ |
| { 5, 13000 }, /* HT20 MCS1 */ |
| { 9, 19500 }, /* HT20 MCS2 */ |
| { 11, 26000 }, /* HT20 MCS3 */ |
| { 15, 39000 }, /* HT20 MCS4 */ |
| { 18, 52000 }, /* HT20 MCS5 */ |
| { 20, 58500 }, /* HT20 MCS6 */ |
| { 25, 65000 }, /* HT20 MCS7 */ |
| { 29, 78000 }, /* VHT20 MCS8 */ |
| { -1, 78000 } /* SNR > 29 */ |
| }; |
| |
| static const struct minsnr_bitrate_entry vht40_table[] = { |
| { 0, 0 }, |
| { 5, 13500 }, /* HT40 MCS0 */ |
| { 8, 27000 }, /* HT40 MCS1 */ |
| { 12, 40500 }, /* HT40 MCS2 */ |
| { 14, 54000 }, /* HT40 MCS3 */ |
| { 18, 81000 }, /* HT40 MCS4 */ |
| { 21, 108000 }, /* HT40 MCS5 */ |
| { 23, 121500 }, /* HT40 MCS6 */ |
| { 28, 135000 }, /* HT40 MCS7 */ |
| { 32, 162000 }, /* VHT40 MCS8 */ |
| { 34, 180000 }, /* VHT40 MCS9 */ |
| { -1, 180000 } /* SNR > 34 */ |
| }; |
| |
| static const struct minsnr_bitrate_entry vht80_table[] = { |
| { 0, 0 }, |
| { 8, 29300 }, /* VHT80 MCS0 */ |
| { 11, 58500 }, /* VHT80 MCS1 */ |
| { 15, 87800 }, /* VHT80 MCS2 */ |
| { 17, 117000 }, /* VHT80 MCS3 */ |
| { 21, 175500 }, /* VHT80 MCS4 */ |
| { 24, 234000 }, /* VHT80 MCS5 */ |
| { 26, 263300 }, /* VHT80 MCS6 */ |
| { 31, 292500 }, /* VHT80 MCS7 */ |
| { 35, 351000 }, /* VHT80 MCS8 */ |
| { 37, 390000 }, /* VHT80 MCS9 */ |
| { -1, 390000 } /* SNR > 37 */ |
| }; |
| |
| |
| static const struct minsnr_bitrate_entry vht160_table[] = { |
| { 0, 0 }, |
| { 11, 58500 }, /* VHT160 MCS0 */ |
| { 14, 117000 }, /* VHT160 MCS1 */ |
| { 18, 175500 }, /* VHT160 MCS2 */ |
| { 20, 234000 }, /* VHT160 MCS3 */ |
| { 24, 351000 }, /* VHT160 MCS4 */ |
| { 27, 468000 }, /* VHT160 MCS5 */ |
| { 29, 526500 }, /* VHT160 MCS6 */ |
| { 34, 585000 }, /* VHT160 MCS7 */ |
| { 38, 702000 }, /* VHT160 MCS8 */ |
| { 40, 780000 }, /* VHT160 MCS9 */ |
| { -1, 780000 } /* SNR > 37 */ |
| }; |
| |
| /* EHT needs to be enabled in order to achieve MCS12 and MCS13 rates. */ |
| #define EHT_MCS 12 |
| |
| static const struct minsnr_bitrate_entry he20_table[] = { |
| { 0, 0 }, |
| { 2, 8600 }, /* HE20 MCS0 */ |
| { 5, 17200 }, /* HE20 MCS1 */ |
| { 9, 25800 }, /* HE20 MCS2 */ |
| { 11, 34400 }, /* HE20 MCS3 */ |
| { 15, 51600 }, /* HE20 MCS4 */ |
| { 18, 68800 }, /* HE20 MCS5 */ |
| { 20, 77400 }, /* HE20 MCS6 */ |
| { 25, 86000 }, /* HE20 MCS7 */ |
| { 29, 103200 }, /* HE20 MCS8 */ |
| { 31, 114700 }, /* HE20 MCS9 */ |
| { 34, 129000 }, /* HE20 MCS10 */ |
| { 36, 143400 }, /* HE20 MCS11 */ |
| { 39, 154900 }, /* EHT20 MCS12 */ |
| { 42, 172100 }, /* EHT20 MCS13 */ |
| { -1, 172100 } /* SNR > 42 */ |
| }; |
| |
| static const struct minsnr_bitrate_entry he40_table[] = { |
| { 0, 0 }, |
| { 5, 17200 }, /* HE40 MCS0 */ |
| { 8, 34400 }, /* HE40 MCS1 */ |
| { 12, 51600 }, /* HE40 MCS2 */ |
| { 14, 68800 }, /* HE40 MCS3 */ |
| { 18, 103200 }, /* HE40 MCS4 */ |
| { 21, 137600 }, /* HE40 MCS5 */ |
| { 23, 154900 }, /* HE40 MCS6 */ |
| { 28, 172100 }, /* HE40 MCS7 */ |
| { 32, 206500 }, /* HE40 MCS8 */ |
| { 34, 229400 }, /* HE40 MCS9 */ |
| { 37, 258100 }, /* HE40 MCS10 */ |
| { 39, 286800 }, /* HE40 MCS11 */ |
| { 42, 309500 }, /* EHT40 MCS12 */ |
| { 45, 344100 }, /* EHT40 MCS13 */ |
| { -1, 344100 } /* SNR > 45 */ |
| }; |
| |
| static const struct minsnr_bitrate_entry he80_table[] = { |
| { 0, 0 }, |
| { 8, 36000 }, /* HE80 MCS0 */ |
| { 11, 72100 }, /* HE80 MCS1 */ |
| { 15, 108100 }, /* HE80 MCS2 */ |
| { 17, 144100 }, /* HE80 MCS3 */ |
| { 21, 216200 }, /* HE80 MCS4 */ |
| { 24, 288200 }, /* HE80 MCS5 */ |
| { 26, 324300 }, /* HE80 MCS6 */ |
| { 31, 360300 }, /* HE80 MCS7 */ |
| { 35, 432400 }, /* HE80 MCS8 */ |
| { 37, 480400 }, /* HE80 MCS9 */ |
| { 40, 540400 }, /* HE80 MCS10 */ |
| { 42, 600500 }, /* HE80 MCS11 */ |
| { 45, 648500 }, /* EHT80 MCS12 */ |
| { 48, 720600 }, /* EHT80 MCS13 */ |
| { -1, 720600 } /* SNR > 48 */ |
| }; |
| |
| |
| static const struct minsnr_bitrate_entry he160_table[] = { |
| { 0, 0 }, |
| { 11, 72100 }, /* HE160 MCS0 */ |
| { 14, 144100 }, /* HE160 MCS1 */ |
| { 18, 216200 }, /* HE160 MCS2 */ |
| { 20, 288200 }, /* HE160 MCS3 */ |
| { 24, 432400 }, /* HE160 MCS4 */ |
| { 27, 576500 }, /* HE160 MCS5 */ |
| { 29, 648500 }, /* HE160 MCS6 */ |
| { 34, 720600 }, /* HE160 MCS7 */ |
| { 38, 864700 }, /* HE160 MCS8 */ |
| { 40, 960800 }, /* HE160 MCS9 */ |
| { 43, 1080900 }, /* HE160 MCS10 */ |
| { 45, 1201000 }, /* HE160 MCS11 */ |
| { 48, 1297100 }, /* EHT160 MCS12 */ |
| { 51, 1441200 }, /* EHT160 MCS13 */ |
| { -1, 1441200 } /* SNR > 51 */ |
| }; |
| |
| /* See IEEE P802.11be/D2.0, Table 36-86: EHT-MCSs for 4x996-tone RU, NSS,u = 1 |
| */ |
| static const struct minsnr_bitrate_entry eht320_table[] = { |
| { 0, 0 }, |
| { 14, 144100 }, /* EHT320 MCS0 */ |
| { 17, 288200 }, /* EHT320 MCS1 */ |
| { 21, 432400 }, /* EHT320 MCS2 */ |
| { 23, 576500 }, /* EHT320 MCS3 */ |
| { 27, 864700 }, /* EHT320 MCS4 */ |
| { 30, 1152900 }, /* EHT320 MCS5 */ |
| { 32, 1297100 }, /* EHT320 MCS6 */ |
| { 37, 1441200 }, /* EHT320 MCS7 */ |
| { 41, 1729400 }, /* EHT320 MCS8 */ |
| { 43, 1921500 }, /* EHT320 MCS9 */ |
| { 46, 2161800 }, /* EHT320 MCS10 */ |
| { 48, 2401900 }, /* EHT320 MCS11 */ |
| { 51, 2594100 }, /* EHT320 MCS12 */ |
| { 54, 2882400 }, /* EHT320 MCS13 */ |
| { -1, 2882400 } /* SNR > 54 */ |
| }; |
| |
| static unsigned int interpolate_rate(int snr, int snr0, int snr1, |
| int rate0, int rate1) |
| { |
| return rate0 + (snr - snr0) * (rate1 - rate0) / (snr1 - snr0); |
| } |
| |
| |
| static unsigned int max_rate(const struct minsnr_bitrate_entry table[], |
| int snr, bool vht) |
| { |
| const struct minsnr_bitrate_entry *prev, *entry = table; |
| |
| while ((entry->minsnr != -1) && |
| (snr >= entry->minsnr) && |
| (vht || entry - table <= vht_mcs)) |
| entry++; |
| if (entry == table) |
| return entry->bitrate; |
| prev = entry - 1; |
| if (entry->minsnr == -1 || (!vht && entry - table > vht_mcs)) |
| return prev->bitrate; |
| return interpolate_rate(snr, prev->minsnr, entry->minsnr, prev->bitrate, |
| entry->bitrate); |
| } |
| |
| |
| static unsigned int max_ht20_rate(int snr, bool vht) |
| { |
| return max_rate(vht20_table, snr, vht); |
| } |
| |
| |
| static unsigned int max_ht40_rate(int snr, bool vht) |
| { |
| return max_rate(vht40_table, snr, vht); |
| } |
| |
| |
| static unsigned int max_vht80_rate(int snr) |
| { |
| return max_rate(vht80_table, snr, 1); |
| } |
| |
| |
| static unsigned int max_vht160_rate(int snr) |
| { |
| return max_rate(vht160_table, snr, 1); |
| } |
| |
| |
| static unsigned int max_he_eht_rate(const struct minsnr_bitrate_entry table[], |
| int snr, bool eht) |
| { |
| const struct minsnr_bitrate_entry *prev, *entry = table; |
| |
| while (entry->minsnr != -1 && snr >= entry->minsnr && |
| (eht || entry - table <= EHT_MCS)) |
| entry++; |
| if (entry == table) |
| return 0; |
| prev = entry - 1; |
| if (entry->minsnr == -1 || (!eht && entry - table > EHT_MCS)) |
| return prev->bitrate; |
| return interpolate_rate(snr, prev->minsnr, entry->minsnr, |
| prev->bitrate, entry->bitrate); |
| } |
| |
| |
| unsigned int wpas_get_est_tpt(const struct wpa_supplicant *wpa_s, |
| const u8 *ies, size_t ies_len, int rate, |
| int snr, int freq) |
| { |
| struct hostapd_hw_modes *hw_mode; |
| unsigned int est, tmp; |
| const u8 *ie; |
| |
| /* Limit based on estimated SNR */ |
| if (rate > 1 * 2 && snr < 1) |
| rate = 1 * 2; |
| else if (rate > 2 * 2 && snr < 4) |
| rate = 2 * 2; |
| else if (rate > 6 * 2 && snr < 5) |
| rate = 6 * 2; |
| else if (rate > 9 * 2 && snr < 6) |
| rate = 9 * 2; |
| else if (rate > 12 * 2 && snr < 7) |
| rate = 12 * 2; |
| else if (rate > 12 * 2 && snr < 8) |
| rate = 14 * 2; |
| else if (rate > 12 * 2 && snr < 9) |
| rate = 16 * 2; |
| else if (rate > 18 * 2 && snr < 10) |
| rate = 18 * 2; |
| else if (rate > 24 * 2 && snr < 11) |
| rate = 24 * 2; |
| else if (rate > 24 * 2 && snr < 12) |
| rate = 27 * 2; |
| else if (rate > 24 * 2 && snr < 13) |
| rate = 30 * 2; |
| else if (rate > 24 * 2 && snr < 14) |
| rate = 33 * 2; |
| else if (rate > 36 * 2 && snr < 15) |
| rate = 36 * 2; |
| else if (rate > 36 * 2 && snr < 16) |
| rate = 39 * 2; |
| else if (rate > 36 * 2 && snr < 17) |
| rate = 42 * 2; |
| else if (rate > 36 * 2 && snr < 18) |
| rate = 45 * 2; |
| else if (rate > 48 * 2 && snr < 19) |
| rate = 48 * 2; |
| else if (rate > 48 * 2 && snr < 20) |
| rate = 51 * 2; |
| else if (rate > 54 * 2 && snr < 21) |
| rate = 54 * 2; |
| est = rate * 500; |
| |
| hw_mode = get_mode_with_freq(wpa_s->hw.modes, wpa_s->hw.num_modes, |
| freq); |
| |
| if (hw_mode && hw_mode->ht_capab) { |
| ie = get_ie(ies, ies_len, WLAN_EID_HT_CAP); |
| if (ie) { |
| tmp = max_ht20_rate(snr, false); |
| if (tmp > est) |
| est = tmp; |
| } |
| } |
| |
| if (hw_mode && |
| (hw_mode->ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET)) { |
| ie = get_ie(ies, ies_len, WLAN_EID_HT_OPERATION); |
| if (ie && ie[1] >= 2 && |
| (ie[3] & HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK)) { |
| tmp = max_ht40_rate(snr, false); |
| if (tmp > est) |
| est = tmp; |
| } |
| } |
| |
| if (hw_mode && hw_mode->vht_capab) { |
| /* Use +1 to assume VHT is always faster than HT */ |
| ie = get_ie(ies, ies_len, WLAN_EID_VHT_CAP); |
| if (ie) { |
| bool vht80 = false, vht160 = false; |
| |
| tmp = max_ht20_rate(snr, true) + 1; |
| if (tmp > est) |
| est = tmp; |
| |
| ie = get_ie(ies, ies_len, WLAN_EID_HT_OPERATION); |
| if (ie && ie[1] >= 2 && |
| (ie[3] & |
| HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK)) { |
| tmp = max_ht40_rate(snr, true) + 1; |
| if (tmp > est) |
| est = tmp; |
| } |
| |
| /* Determine VHT BSS bandwidth based on IEEE Std |
| * 802.11-2020, Table 11-23 (VHT BSs bandwidth) */ |
| ie = get_ie(ies, ies_len, WLAN_EID_VHT_OPERATION); |
| if (ie && ie[1] >= 3) { |
| u8 cw = ie[2] & VHT_OPMODE_CHANNEL_WIDTH_MASK; |
| u8 seg0 = ie[3]; |
| u8 seg1 = ie[4]; |
| |
| if (cw) |
| vht80 = true; |
| if (cw == 2 || |
| (cw == 3 && |
| (seg1 > 0 && abs(seg1 - seg0) == 16))) |
| vht160 = true; |
| if (cw == 1 && |
| ((seg1 > 0 && abs(seg1 - seg0) == 8) || |
| (seg1 > 0 && abs(seg1 - seg0) == 16))) |
| vht160 = true; |
| } |
| |
| if (vht80) { |
| tmp = max_vht80_rate(snr) + 1; |
| if (tmp > est) |
| est = tmp; |
| } |
| |
| if (vht160 && |
| (hw_mode->vht_capab & |
| (VHT_CAP_SUPP_CHAN_WIDTH_160MHZ | |
| VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ))) { |
| tmp = max_vht160_rate(snr) + 1; |
| if (tmp > est) |
| est = tmp; |
| } |
| } |
| } |
| |
| if (hw_mode && hw_mode->he_capab[IEEE80211_MODE_INFRA].he_supported) { |
| /* Use +2 to assume HE is always faster than HT/VHT */ |
| struct ieee80211_he_capabilities *he; |
| struct ieee80211_eht_capabilities *eht; |
| struct he_capabilities *own_he; |
| u8 cw, boost = 2; |
| const u8 *eht_ie; |
| bool is_eht = false; |
| |
| ie = get_ie_ext(ies, ies_len, WLAN_EID_EXT_HE_CAPABILITIES); |
| if (!ie || (ie[1] < 1 + IEEE80211_HE_CAPAB_MIN_LEN)) |
| return est; |
| he = (struct ieee80211_he_capabilities *) &ie[3]; |
| own_he = &hw_mode->he_capab[IEEE80211_MODE_INFRA]; |
| |
| /* Use +3 to assume EHT is always faster than HE */ |
| if (hw_mode->eht_capab[IEEE80211_MODE_INFRA].eht_supported) { |
| eht_ie = get_ie_ext(ies, ies_len, |
| WLAN_EID_EXT_EHT_CAPABILITIES); |
| if (eht_ie && |
| (eht_ie[1] >= 1 + IEEE80211_EHT_CAPAB_MIN_LEN)) { |
| is_eht = true; |
| boost = 3; |
| } |
| } |
| |
| tmp = max_he_eht_rate(he20_table, snr, is_eht) + boost; |
| if (tmp > est) |
| est = tmp; |
| |
| cw = he->he_phy_capab_info[HE_PHYCAP_CHANNEL_WIDTH_SET_IDX] & |
| own_he->phy_cap[HE_PHYCAP_CHANNEL_WIDTH_SET_IDX]; |
| if (cw & |
| (IS_2P4GHZ(freq) ? HE_PHYCAP_CHANNEL_WIDTH_SET_40MHZ_IN_2G : |
| HE_PHYCAP_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G)) { |
| tmp = max_he_eht_rate(he40_table, snr, is_eht) + boost; |
| if (tmp > est) |
| est = tmp; |
| } |
| |
| if (!IS_2P4GHZ(freq) && |
| (cw & HE_PHYCAP_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G)) { |
| tmp = max_he_eht_rate(he80_table, snr, is_eht) + boost; |
| if (tmp > est) |
| est = tmp; |
| } |
| |
| if (!IS_2P4GHZ(freq) && |
| (cw & (HE_PHYCAP_CHANNEL_WIDTH_SET_160MHZ_IN_5G | |
| HE_PHYCAP_CHANNEL_WIDTH_SET_80PLUS80MHZ_IN_5G))) { |
| tmp = max_he_eht_rate(he160_table, snr, is_eht) + boost; |
| if (tmp > est) |
| est = tmp; |
| } |
| |
| if (!is_eht) |
| return est; |
| |
| eht = (struct ieee80211_eht_capabilities *) &eht_ie[3]; |
| |
| if (is_6ghz_freq(freq) && |
| (eht->phy_cap[EHT_PHYCAP_320MHZ_IN_6GHZ_SUPPORT_IDX] & |
| EHT_PHYCAP_320MHZ_IN_6GHZ_SUPPORT_MASK)) { |
| tmp = max_he_eht_rate(eht320_table, snr, true); |
| if (tmp > est) |
| est = tmp; |
| } |
| } |
| |
| return est; |
| } |
| |
| |
| void scan_est_throughput(struct wpa_supplicant *wpa_s, |
| struct wpa_scan_res *res) |
| { |
| int rate; /* max legacy rate in 500 kb/s units */ |
| int snr = res->snr; |
| const u8 *ies = (const void *) (res + 1); |
| size_t ie_len = res->ie_len; |
| |
| if (res->est_throughput) |
| return; |
| |
| /* Get maximum legacy rate */ |
| rate = wpa_scan_get_max_rate(res); |
| |
| if (!ie_len) |
| ie_len = res->beacon_ie_len; |
| res->est_throughput = |
| wpas_get_est_tpt(wpa_s, ies, ie_len, rate, snr, res->freq); |
| |
| /* TODO: channel utilization and AP load (e.g., from AP Beacon) */ |
| } |
| |
| |
| /** |
| * wpa_supplicant_get_scan_results - Get scan results |
| * @wpa_s: Pointer to wpa_supplicant data |
| * @info: Information about what was scanned or %NULL if not available |
| * @new_scan: Whether a new scan was performed |
| * Returns: Scan results, %NULL on failure |
| * |
| * This function request the current scan results from the driver and updates |
| * the local BSS list wpa_s->bss. The caller is responsible for freeing the |
| * results with wpa_scan_results_free(). |
| */ |
| struct wpa_scan_results * |
| wpa_supplicant_get_scan_results(struct wpa_supplicant *wpa_s, |
| struct scan_info *info, int new_scan) |
| { |
| struct wpa_scan_results *scan_res; |
| size_t i; |
| int (*compar)(const void *, const void *) = wpa_scan_result_compar; |
| |
| scan_res = wpa_drv_get_scan_results2(wpa_s); |
| if (scan_res == NULL) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Failed to get scan results"); |
| return NULL; |
| } |
| if (scan_res->fetch_time.sec == 0) { |
| /* |
| * Make sure we have a valid timestamp if the driver wrapper |
| * does not set this. |
| */ |
| os_get_reltime(&scan_res->fetch_time); |
| } |
| filter_scan_res(wpa_s, scan_res); |
| |
| for (i = 0; i < scan_res->num; i++) { |
| struct wpa_scan_res *scan_res_item = scan_res->res[i]; |
| |
| scan_snr(scan_res_item); |
| scan_est_throughput(wpa_s, scan_res_item); |
| } |
| |
| #ifdef CONFIG_WPS |
| if (wpas_wps_searching(wpa_s)) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Order scan results with WPS " |
| "provisioning rules"); |
| compar = wpa_scan_result_wps_compar; |
| } |
| #endif /* CONFIG_WPS */ |
| |
| if (scan_res->res) { |
| qsort(scan_res->res, scan_res->num, |
| sizeof(struct wpa_scan_res *), compar); |
| } |
| dump_scan_res(scan_res); |
| |
| if (wpa_s->ignore_post_flush_scan_res) { |
| /* FLUSH command aborted an ongoing scan and these are the |
| * results from the aborted scan. Do not process the results to |
| * maintain flushed state. */ |
| wpa_dbg(wpa_s, MSG_DEBUG, |
| "Do not update BSS table based on pending post-FLUSH scan results"); |
| wpa_s->ignore_post_flush_scan_res = 0; |
| return scan_res; |
| } |
| |
| wpa_bss_update_start(wpa_s); |
| for (i = 0; i < scan_res->num; i++) |
| wpa_bss_update_scan_res(wpa_s, scan_res->res[i], |
| &scan_res->fetch_time); |
| wpa_bss_update_end(wpa_s, info, new_scan); |
| |
| return scan_res; |
| } |
| |
| |
| /** |
| * wpa_supplicant_update_scan_results - Update scan results from the driver |
| * @wpa_s: Pointer to wpa_supplicant data |
| * Returns: 0 on success, -1 on failure |
| * |
| * This function updates the BSS table within wpa_supplicant based on the |
| * currently available scan results from the driver without requesting a new |
| * scan. This is used in cases where the driver indicates an association |
| * (including roaming within ESS) and wpa_supplicant does not yet have the |
| * needed information to complete the connection (e.g., to perform validation |
| * steps in 4-way handshake). |
| */ |
| int wpa_supplicant_update_scan_results(struct wpa_supplicant *wpa_s) |
| { |
| struct wpa_scan_results *scan_res; |
| scan_res = wpa_supplicant_get_scan_results(wpa_s, NULL, 0); |
| if (scan_res == NULL) |
| return -1; |
| wpa_scan_results_free(scan_res); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * scan_only_handler - Reports scan results |
| */ |
| void scan_only_handler(struct wpa_supplicant *wpa_s, |
| struct wpa_scan_results *scan_res) |
| { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Scan-only results received"); |
| if (wpa_s->last_scan_req == MANUAL_SCAN_REQ && |
| wpa_s->manual_scan_use_id && wpa_s->own_scan_running) { |
| wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_RESULTS "id=%u", |
| wpa_s->manual_scan_id); |
| wpa_s->manual_scan_use_id = 0; |
| } else { |
| wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_RESULTS); |
| } |
| wpas_notify_scan_results(wpa_s); |
| wpas_notify_scan_done(wpa_s, 1); |
| if (wpa_s->scan_work) { |
| struct wpa_radio_work *work = wpa_s->scan_work; |
| wpa_s->scan_work = NULL; |
| radio_work_done(work); |
| } |
| |
| if (wpa_s->wpa_state == WPA_SCANNING) |
| wpa_supplicant_set_state(wpa_s, wpa_s->scan_prev_wpa_state); |
| } |
| |
| |
| int wpas_scan_scheduled(struct wpa_supplicant *wpa_s) |
| { |
| return eloop_is_timeout_registered(wpa_supplicant_scan, wpa_s, NULL); |
| } |
| |
| |
| struct wpa_driver_scan_params * |
| wpa_scan_clone_params(const struct wpa_driver_scan_params *src) |
| { |
| struct wpa_driver_scan_params *params; |
| size_t i; |
| u8 *n; |
| |
| params = os_zalloc(sizeof(*params)); |
| if (params == NULL) |
| return NULL; |
| |
| for (i = 0; i < src->num_ssids; i++) { |
| if (src->ssids[i].ssid) { |
| n = os_memdup(src->ssids[i].ssid, |
| src->ssids[i].ssid_len); |
| if (n == NULL) |
| goto failed; |
| params->ssids[i].ssid = n; |
| params->ssids[i].ssid_len = src->ssids[i].ssid_len; |
| } |
| } |
| params->num_ssids = src->num_ssids; |
| |
| if (src->extra_ies) { |
| n = os_memdup(src->extra_ies, src->extra_ies_len); |
| if (n == NULL) |
| goto failed; |
| params->extra_ies = n; |
| params->extra_ies_len = src->extra_ies_len; |
| } |
| |
| if (src->freqs) { |
| int len = int_array_len(src->freqs); |
| params->freqs = os_memdup(src->freqs, (len + 1) * sizeof(int)); |
| if (params->freqs == NULL) |
| goto failed; |
| } |
| |
| if (src->filter_ssids) { |
| params->filter_ssids = os_memdup(src->filter_ssids, |
| sizeof(*params->filter_ssids) * |
| src->num_filter_ssids); |
| if (params->filter_ssids == NULL) |
| goto failed; |
| params->num_filter_ssids = src->num_filter_ssids; |
| } |
| |
| params->filter_rssi = src->filter_rssi; |
| params->p2p_probe = src->p2p_probe; |
| params->only_new_results = src->only_new_results; |
| params->low_priority = src->low_priority; |
| params->duration = src->duration; |
| params->duration_mandatory = src->duration_mandatory; |
| params->oce_scan = src->oce_scan; |
| |
| if (src->sched_scan_plans_num > 0) { |
| params->sched_scan_plans = |
| os_memdup(src->sched_scan_plans, |
| sizeof(*src->sched_scan_plans) * |
| src->sched_scan_plans_num); |
| if (!params->sched_scan_plans) |
| goto failed; |
| |
| params->sched_scan_plans_num = src->sched_scan_plans_num; |
| } |
| |
| if (src->mac_addr_rand && |
| wpa_setup_mac_addr_rand_params(params, src->mac_addr)) |
| goto failed; |
| |
| if (src->bssid) { |
| u8 *bssid; |
| |
| bssid = os_memdup(src->bssid, ETH_ALEN); |
| if (!bssid) |
| goto failed; |
| params->bssid = bssid; |
| } |
| |
| params->relative_rssi_set = src->relative_rssi_set; |
| params->relative_rssi = src->relative_rssi; |
| params->relative_adjust_band = src->relative_adjust_band; |
| params->relative_adjust_rssi = src->relative_adjust_rssi; |
| params->p2p_include_6ghz = src->p2p_include_6ghz; |
| params->non_coloc_6ghz = src->non_coloc_6ghz; |
| return params; |
| |
| failed: |
| wpa_scan_free_params(params); |
| return NULL; |
| } |
| |
| |
| void wpa_scan_free_params(struct wpa_driver_scan_params *params) |
| { |
| size_t i; |
| |
| if (params == NULL) |
| return; |
| |
| for (i = 0; i < params->num_ssids; i++) |
| os_free((u8 *) params->ssids[i].ssid); |
| os_free((u8 *) params->extra_ies); |
| os_free(params->freqs); |
| os_free(params->filter_ssids); |
| os_free(params->sched_scan_plans); |
| |
| /* |
| * Note: params->mac_addr_mask points to same memory allocation and |
| * must not be freed separately. |
| */ |
| os_free((u8 *) params->mac_addr); |
| |
| os_free((u8 *) params->bssid); |
| |
| os_free(params); |
| } |
| |
| |
| int wpas_start_pno(struct wpa_supplicant *wpa_s) |
| { |
| int ret; |
| size_t prio, i, num_ssid, num_match_ssid; |
| struct wpa_ssid *ssid; |
| struct wpa_driver_scan_params params; |
| struct sched_scan_plan scan_plan; |
| unsigned int max_sched_scan_ssids; |
| |
| if (!wpa_s->sched_scan_supported) |
| return -1; |
| |
| if (wpa_s->max_sched_scan_ssids > WPAS_MAX_SCAN_SSIDS) |
| max_sched_scan_ssids = WPAS_MAX_SCAN_SSIDS; |
| else |
| max_sched_scan_ssids = wpa_s->max_sched_scan_ssids; |
| if (max_sched_scan_ssids < 1) |
| return -1; |
| |
| if (wpa_s->pno || wpa_s->pno_sched_pending) |
| return 0; |
| |
| if ((wpa_s->wpa_state > WPA_SCANNING) && |
| (wpa_s->wpa_state < WPA_COMPLETED)) { |
| wpa_printf(MSG_ERROR, "PNO: In assoc process"); |
| return -EAGAIN; |
| } |
| |
| if (wpa_s->wpa_state == WPA_SCANNING) { |
| wpa_supplicant_cancel_scan(wpa_s); |
| if (wpa_s->sched_scanning) { |
| wpa_printf(MSG_DEBUG, "Schedule PNO on completion of " |
| "ongoing sched scan"); |
| wpa_supplicant_cancel_sched_scan(wpa_s); |
| wpa_s->pno_sched_pending = 1; |
| return 0; |
| } |
| } |
| |
| if (wpa_s->sched_scan_stop_req) { |
| wpa_printf(MSG_DEBUG, |
| "Schedule PNO after previous sched scan has stopped"); |
| wpa_s->pno_sched_pending = 1; |
| return 0; |
| } |
| |
| os_memset(¶ms, 0, sizeof(params)); |
| |
| num_ssid = num_match_ssid = 0; |
| ssid = wpa_s->conf->ssid; |
| while (ssid) { |
| if (!wpas_network_disabled(wpa_s, ssid)) { |
| num_match_ssid++; |
| if (ssid->scan_ssid) |
| num_ssid++; |
| } |
| ssid = ssid->next; |
| } |
| |
| if (num_match_ssid == 0) { |
| wpa_printf(MSG_DEBUG, "PNO: No configured SSIDs"); |
| return -1; |
| } |
| |
| if (num_match_ssid > num_ssid) { |
| params.num_ssids++; /* wildcard */ |
| num_ssid++; |
| } |
| |
| if (num_ssid > max_sched_scan_ssids) { |
| wpa_printf(MSG_DEBUG, "PNO: Use only the first %u SSIDs from " |
| "%u", max_sched_scan_ssids, (unsigned int) num_ssid); |
| num_ssid = max_sched_scan_ssids; |
| } |
| |
| if (num_match_ssid > wpa_s->max_match_sets) { |
| num_match_ssid = wpa_s->max_match_sets; |
| wpa_dbg(wpa_s, MSG_DEBUG, "PNO: Too many SSIDs to match"); |
| } |
| params.filter_ssids = os_calloc(num_match_ssid, |
| sizeof(struct wpa_driver_scan_filter)); |
| if (params.filter_ssids == NULL) |
| return -1; |
| |
| i = 0; |
| prio = 0; |
| ssid = wpa_s->conf->pssid[prio]; |
| while (ssid) { |
| if (!wpas_network_disabled(wpa_s, ssid)) { |
| if (ssid->scan_ssid && params.num_ssids < num_ssid) { |
| params.ssids[params.num_ssids].ssid = |
| ssid->ssid; |
| params.ssids[params.num_ssids].ssid_len = |
| ssid->ssid_len; |
| params.num_ssids++; |
| } |
| os_memcpy(params.filter_ssids[i].ssid, ssid->ssid, |
| ssid->ssid_len); |
| params.filter_ssids[i].ssid_len = ssid->ssid_len; |
| params.num_filter_ssids++; |
| i++; |
| if (i == num_match_ssid) |
| break; |
| } |
| if (ssid->pnext) |
| ssid = ssid->pnext; |
| else if (prio + 1 == wpa_s->conf->num_prio) |
| break; |
| else |
| ssid = wpa_s->conf->pssid[++prio]; |
| } |
| |
| if (wpa_s->conf->filter_rssi) |
| params.filter_rssi = wpa_s->conf->filter_rssi; |
| |
| if (wpa_s->sched_scan_plans_num) { |
| params.sched_scan_plans = wpa_s->sched_scan_plans; |
| params.sched_scan_plans_num = wpa_s->sched_scan_plans_num; |
| } else { |
| /* Set one scan plan that will run infinitely */ |
| if (wpa_s->conf->sched_scan_interval) |
| scan_plan.interval = wpa_s->conf->sched_scan_interval; |
| else |
| scan_plan.interval = 10; |
| |
| scan_plan.iterations = 0; |
| params.sched_scan_plans = &scan_plan; |
| params.sched_scan_plans_num = 1; |
| } |
| |
| params.sched_scan_start_delay = wpa_s->conf->sched_scan_start_delay; |
| |
| if (params.freqs == NULL && wpa_s->manual_sched_scan_freqs) { |
| wpa_dbg(wpa_s, MSG_DEBUG, "Limit sched scan to specified channels"); |
| params.freqs = wpa_s->manual_sched_scan_freqs; |
| } |
| |
| if ((wpa_s->mac_addr_rand_enable & MAC_ADDR_RAND_PNO) && |
| wpa_s->wpa_state <= WPA_SCANNING) |
| wpa_setup_mac_addr_rand_params(¶ms, wpa_s->mac_addr_pno); |
| |
| wpa_scan_set_relative_rssi_params(wpa_s, ¶ms); |
| |
| ret = wpa_supplicant_start_sched_scan(wpa_s, ¶ms); |
| os_free(params.filter_ssids); |
| os_free(params.mac_addr); |
| if (ret == 0) |
| wpa_s->pno = 1; |
| else |
| wpa_msg(wpa_s, MSG_ERROR, "Failed to schedule PNO"); |
| return ret; |
| } |
| |
| |
| int wpas_stop_pno(struct wpa_supplicant *wpa_s) |
| { |
| int ret = 0; |
| |
| if (!wpa_s->pno) |
| return 0; |
| |
| ret = wpa_supplicant_stop_sched_scan(wpa_s); |
| wpa_s->sched_scan_stop_req = 1; |
| |
| wpa_s->pno = 0; |
| wpa_s->pno_sched_pending = 0; |
| |
| if (wpa_s->wpa_state == WPA_SCANNING) |
| wpa_supplicant_req_scan(wpa_s, 0, 0); |
| |
| return ret; |
| } |
| |
| |
| void wpas_mac_addr_rand_scan_clear(struct wpa_supplicant *wpa_s, |
| unsigned int type) |
| { |
| type &= MAC_ADDR_RAND_ALL; |
| wpa_s->mac_addr_rand_enable &= ~type; |
| |
| if (type & MAC_ADDR_RAND_SCAN) { |
| os_free(wpa_s->mac_addr_scan); |
| wpa_s->mac_addr_scan = NULL; |
| } |
| |
| if (type & MAC_ADDR_RAND_SCHED_SCAN) { |
| os_free(wpa_s->mac_addr_sched_scan); |
| wpa_s->mac_addr_sched_scan = NULL; |
| } |
| |
| if (type & MAC_ADDR_RAND_PNO) { |
| os_free(wpa_s->mac_addr_pno); |
| wpa_s->mac_addr_pno = NULL; |
| } |
| } |
| |
| |
| int wpas_mac_addr_rand_scan_set(struct wpa_supplicant *wpa_s, |
| unsigned int type, const u8 *addr, |
| const u8 *mask) |
| { |
| u8 *tmp = NULL; |
| |
| if ((wpa_s->mac_addr_rand_supported & type) != type ) { |
| wpa_printf(MSG_INFO, |
| "scan: MAC randomization type %u != supported=%u", |
| type, wpa_s->mac_addr_rand_supported); |
| return -1; |
| } |
| |
| wpas_mac_addr_rand_scan_clear(wpa_s, type); |
| |
| if (addr) { |
| tmp = os_malloc(2 * ETH_ALEN); |
| if (!tmp) |
| return -1; |
| os_memcpy(tmp, addr, ETH_ALEN); |
| os_memcpy(tmp + ETH_ALEN, mask, ETH_ALEN); |
| } |
| |
| if (type == MAC_ADDR_RAND_SCAN) { |
| wpa_s->mac_addr_scan = tmp; |
| } else if (type == MAC_ADDR_RAND_SCHED_SCAN) { |
| wpa_s->mac_addr_sched_scan = tmp; |
| } else if (type == MAC_ADDR_RAND_PNO) { |
| wpa_s->mac_addr_pno = tmp; |
| } else { |
| wpa_printf(MSG_INFO, |
| "scan: Invalid MAC randomization type=0x%x", |
| type); |
| os_free(tmp); |
| return -1; |
| } |
| |
| wpa_s->mac_addr_rand_enable |= type; |
| return 0; |
| } |
| |
| |
| int wpas_mac_addr_rand_scan_get_mask(struct wpa_supplicant *wpa_s, |
| unsigned int type, u8 *mask) |
| { |
| const u8 *to_copy; |
| |
| if ((wpa_s->mac_addr_rand_enable & type) != type) |
| return -1; |
| |
| if (type == MAC_ADDR_RAND_SCAN) { |
| to_copy = wpa_s->mac_addr_scan; |
| } else if (type == MAC_ADDR_RAND_SCHED_SCAN) { |
| to_copy = wpa_s->mac_addr_sched_scan; |
| } else if (type == MAC_ADDR_RAND_PNO) { |
| to_copy = wpa_s->mac_addr_pno; |
| } else { |
| wpa_printf(MSG_DEBUG, |
| "scan: Invalid MAC randomization type=0x%x", |
| type); |
| return -1; |
| } |
| |
| os_memcpy(mask, to_copy + ETH_ALEN, ETH_ALEN); |
| return 0; |
| } |
| |
| |
| int wpas_abort_ongoing_scan(struct wpa_supplicant *wpa_s) |
| { |
| struct wpa_radio_work *work; |
| struct wpa_radio *radio = wpa_s->radio; |
| |
| dl_list_for_each(work, &radio->work, struct wpa_radio_work, list) { |
| if (work->wpa_s != wpa_s || !work->started || |
| (os_strcmp(work->type, "scan") != 0 && |
| os_strcmp(work->type, "p2p-scan") != 0)) |
| continue; |
| wpa_dbg(wpa_s, MSG_DEBUG, "Abort an ongoing scan"); |
| return wpa_drv_abort_scan(wpa_s, wpa_s->curr_scan_cookie); |
| } |
| |
| wpa_dbg(wpa_s, MSG_DEBUG, "No ongoing scan/p2p-scan found to abort"); |
| return -1; |
| } |
| |
| |
| int wpas_sched_scan_plans_set(struct wpa_supplicant *wpa_s, const char *cmd) |
| { |
| struct sched_scan_plan *scan_plans = NULL; |
| const char *token, *context = NULL; |
| unsigned int num = 0; |
| |
| if (!cmd) |
| return -1; |
| |
| if (!cmd[0]) { |
| wpa_printf(MSG_DEBUG, "Clear sched scan plans"); |
| os_free(wpa_s->sched_scan_plans); |
| wpa_s->sched_scan_plans = NULL; |
| wpa_s->sched_scan_plans_num = 0; |
| return 0; |
| } |
| |
| while ((token = cstr_token(cmd, " ", &context))) { |
| int ret; |
| struct sched_scan_plan *scan_plan, *n; |
| |
| n = os_realloc_array(scan_plans, num + 1, sizeof(*scan_plans)); |
| if (!n) |
| goto fail; |
| |
| scan_plans = n; |
| scan_plan = &scan_plans[num]; |
| num++; |
| |
| ret = sscanf(token, "%u:%u", &scan_plan->interval, |
| &scan_plan->iterations); |
| if (ret <= 0 || ret > 2 || !scan_plan->interval) { |
| wpa_printf(MSG_ERROR, |
| "Invalid sched scan plan input: %s", token); |
| goto fail; |
| } |
| |
| if (scan_plan->interval > wpa_s->max_sched_scan_plan_interval) { |
| wpa_printf(MSG_WARNING, |
| "scan plan %u: Scan interval too long(%u), use the maximum allowed(%u)", |
| num, scan_plan->interval, |
| wpa_s->max_sched_scan_plan_interval); |
| scan_plan->interval = |
| wpa_s->max_sched_scan_plan_interval; |
| } |
| |
| if (ret == 1) { |
| scan_plan->iterations = 0; |
| break; |
| } |
| |
| if (!scan_plan->iterations) { |
| wpa_printf(MSG_ERROR, |
| "scan plan %u: Number of iterations cannot be zero", |
| num); |
| goto fail; |
| } |
| |
| if (scan_plan->iterations > |
| wpa_s->max_sched_scan_plan_iterations) { |
| wpa_printf(MSG_WARNING, |
| "scan plan %u: Too many iterations(%u), use the maximum allowed(%u)", |
| num, scan_plan->iterations, |
| wpa_s->max_sched_scan_plan_iterations); |
| scan_plan->iterations = |
| wpa_s->max_sched_scan_plan_iterations; |
| } |
| |
| wpa_printf(MSG_DEBUG, |
| "scan plan %u: interval=%u iterations=%u", |
| num, scan_plan->interval, scan_plan->iterations); |
| } |
| |
| if (!scan_plans) { |
| wpa_printf(MSG_ERROR, "Invalid scan plans entry"); |
| goto fail; |
| } |
| |
| if (cstr_token(cmd, " ", &context) || scan_plans[num - 1].iterations) { |
| wpa_printf(MSG_ERROR, |
| "All scan plans but the last must specify a number of iterations"); |
| goto fail; |
| } |
| |
| wpa_printf(MSG_DEBUG, "scan plan %u (last plan): interval=%u", |
| num, scan_plans[num - 1].interval); |
| |
| if (num > wpa_s->max_sched_scan_plans) { |
| wpa_printf(MSG_WARNING, |
| "Too many scheduled scan plans (only %u supported)", |
| wpa_s->max_sched_scan_plans); |
| wpa_printf(MSG_WARNING, |
| "Use only the first %u scan plans, and the last one (in infinite loop)", |
| wpa_s->max_sched_scan_plans - 1); |
| os_memcpy(&scan_plans[wpa_s->max_sched_scan_plans - 1], |
| &scan_plans[num - 1], sizeof(*scan_plans)); |
| num = wpa_s->max_sched_scan_plans; |
| } |
| |
| os_free(wpa_s->sched_scan_plans); |
| wpa_s->sched_scan_plans = scan_plans; |
| wpa_s->sched_scan_plans_num = num; |
| |
| return 0; |
| |
| fail: |
| os_free(scan_plans); |
| wpa_printf(MSG_ERROR, "invalid scan plans list"); |
| return -1; |
| } |
| |
| |
| /** |
| * wpas_scan_reset_sched_scan - Reset sched_scan state |
| * @wpa_s: Pointer to wpa_supplicant data |
| * |
| * This function is used to cancel a running scheduled scan and to reset an |
| * internal scan state to continue with a regular scan on the following |
| * wpa_supplicant_req_scan() calls. |
| */ |
| void wpas_scan_reset_sched_scan(struct wpa_supplicant *wpa_s) |
| { |
| wpa_s->normal_scans = 0; |
| if (wpa_s->sched_scanning) { |
| wpa_s->sched_scan_timed_out = 0; |
| wpa_s->prev_sched_ssid = NULL; |
| wpa_supplicant_cancel_sched_scan(wpa_s); |
| } |
| } |
| |
| |
| void wpas_scan_restart_sched_scan(struct wpa_supplicant *wpa_s) |
| { |
| /* simulate timeout to restart the sched scan */ |
| wpa_s->sched_scan_timed_out = 1; |
| wpa_s->prev_sched_ssid = NULL; |
| wpa_supplicant_cancel_sched_scan(wpa_s); |
| } |