| /* |
| * hostapd / Initialization and configuration |
| * Copyright (c) 2002-2014, Jouni Malinen <j@w1.fi> |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| */ |
| |
| #include "utils/includes.h" |
| |
| #include "utils/common.h" |
| #include "utils/eloop.h" |
| #include "common/ieee802_11_defs.h" |
| #include "common/wpa_ctrl.h" |
| #include "radius/radius_client.h" |
| #include "radius/radius_das.h" |
| #include "eap_server/tncs.h" |
| #include "eapol_auth/eapol_auth_sm.h" |
| #include "eapol_auth/eapol_auth_sm_i.h" |
| #include "hostapd.h" |
| #include "authsrv.h" |
| #include "sta_info.h" |
| #include "accounting.h" |
| #include "ap_list.h" |
| #include "beacon.h" |
| #include "iapp.h" |
| #include "ieee802_1x.h" |
| #include "ieee802_11_auth.h" |
| #include "vlan_init.h" |
| #include "wpa_auth.h" |
| #include "wps_hostapd.h" |
| #include "hw_features.h" |
| #include "wpa_auth_glue.h" |
| #include "ap_drv_ops.h" |
| #include "ap_config.h" |
| #include "p2p_hostapd.h" |
| #include "gas_serv.h" |
| #include "dfs.h" |
| #include "ieee802_11.h" |
| #include "bss_load.h" |
| #include "x_snoop.h" |
| #include "dhcp_snoop.h" |
| #include "ndisc_snoop.h" |
| |
| |
| static int hostapd_flush_old_stations(struct hostapd_data *hapd, u16 reason); |
| static int hostapd_setup_encryption(char *iface, struct hostapd_data *hapd); |
| static int hostapd_broadcast_wep_clear(struct hostapd_data *hapd); |
| static int setup_interface2(struct hostapd_iface *iface); |
| static void channel_list_update_timeout(void *eloop_ctx, void *timeout_ctx); |
| |
| |
| int hostapd_for_each_interface(struct hapd_interfaces *interfaces, |
| int (*cb)(struct hostapd_iface *iface, |
| void *ctx), void *ctx) |
| { |
| size_t i; |
| int ret; |
| |
| for (i = 0; i < interfaces->count; i++) { |
| ret = cb(interfaces->iface[i], ctx); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| |
| static void hostapd_reload_bss(struct hostapd_data *hapd) |
| { |
| struct hostapd_ssid *ssid; |
| |
| #ifndef CONFIG_NO_RADIUS |
| radius_client_reconfig(hapd->radius, hapd->conf->radius); |
| #endif /* CONFIG_NO_RADIUS */ |
| |
| ssid = &hapd->conf->ssid; |
| if (!ssid->wpa_psk_set && ssid->wpa_psk && !ssid->wpa_psk->next && |
| ssid->wpa_passphrase_set && ssid->wpa_passphrase) { |
| /* |
| * Force PSK to be derived again since SSID or passphrase may |
| * have changed. |
| */ |
| hostapd_config_clear_wpa_psk(&hapd->conf->ssid.wpa_psk); |
| } |
| if (hostapd_setup_wpa_psk(hapd->conf)) { |
| wpa_printf(MSG_ERROR, "Failed to re-configure WPA PSK " |
| "after reloading configuration"); |
| } |
| |
| if (hapd->conf->ieee802_1x || hapd->conf->wpa) |
| hostapd_set_drv_ieee8021x(hapd, hapd->conf->iface, 1); |
| else |
| hostapd_set_drv_ieee8021x(hapd, hapd->conf->iface, 0); |
| |
| if ((hapd->conf->wpa || hapd->conf->osen) && hapd->wpa_auth == NULL) { |
| hostapd_setup_wpa(hapd); |
| if (hapd->wpa_auth) |
| wpa_init_keys(hapd->wpa_auth); |
| } else if (hapd->conf->wpa) { |
| const u8 *wpa_ie; |
| size_t wpa_ie_len; |
| hostapd_reconfig_wpa(hapd); |
| wpa_ie = wpa_auth_get_wpa_ie(hapd->wpa_auth, &wpa_ie_len); |
| if (hostapd_set_generic_elem(hapd, wpa_ie, wpa_ie_len)) |
| wpa_printf(MSG_ERROR, "Failed to configure WPA IE for " |
| "the kernel driver."); |
| } else if (hapd->wpa_auth) { |
| wpa_deinit(hapd->wpa_auth); |
| hapd->wpa_auth = NULL; |
| hostapd_set_privacy(hapd, 0); |
| hostapd_setup_encryption(hapd->conf->iface, hapd); |
| hostapd_set_generic_elem(hapd, (u8 *) "", 0); |
| } |
| |
| ieee802_11_set_beacon(hapd); |
| hostapd_update_wps(hapd); |
| |
| if (hapd->conf->ssid.ssid_set && |
| hostapd_set_ssid(hapd, hapd->conf->ssid.ssid, |
| hapd->conf->ssid.ssid_len)) { |
| wpa_printf(MSG_ERROR, "Could not set SSID for kernel driver"); |
| /* try to continue */ |
| } |
| wpa_printf(MSG_DEBUG, "Reconfigured interface %s", hapd->conf->iface); |
| } |
| |
| |
| static void hostapd_clear_old(struct hostapd_iface *iface) |
| { |
| size_t j; |
| |
| /* |
| * Deauthenticate all stations since the new configuration may not |
| * allow them to use the BSS anymore. |
| */ |
| for (j = 0; j < iface->num_bss; j++) { |
| hostapd_flush_old_stations(iface->bss[j], |
| WLAN_REASON_PREV_AUTH_NOT_VALID); |
| hostapd_broadcast_wep_clear(iface->bss[j]); |
| |
| #ifndef CONFIG_NO_RADIUS |
| /* TODO: update dynamic data based on changed configuration |
| * items (e.g., open/close sockets, etc.) */ |
| radius_client_flush(iface->bss[j]->radius, 0); |
| #endif /* CONFIG_NO_RADIUS */ |
| } |
| } |
| |
| |
| int hostapd_reload_config(struct hostapd_iface *iface) |
| { |
| struct hostapd_data *hapd = iface->bss[0]; |
| struct hostapd_config *newconf, *oldconf; |
| size_t j; |
| |
| if (iface->config_fname == NULL) { |
| /* Only in-memory config in use - assume it has been updated */ |
| hostapd_clear_old(iface); |
| for (j = 0; j < iface->num_bss; j++) |
| hostapd_reload_bss(iface->bss[j]); |
| return 0; |
| } |
| |
| if (iface->interfaces == NULL || |
| iface->interfaces->config_read_cb == NULL) |
| return -1; |
| newconf = iface->interfaces->config_read_cb(iface->config_fname); |
| if (newconf == NULL) |
| return -1; |
| |
| hostapd_clear_old(iface); |
| |
| oldconf = hapd->iconf; |
| iface->conf = newconf; |
| |
| for (j = 0; j < iface->num_bss; j++) { |
| hapd = iface->bss[j]; |
| hapd->iconf = newconf; |
| hapd->iconf->channel = oldconf->channel; |
| hapd->iconf->secondary_channel = oldconf->secondary_channel; |
| hapd->iconf->ieee80211n = oldconf->ieee80211n; |
| hapd->iconf->ieee80211ac = oldconf->ieee80211ac; |
| hapd->iconf->ht_capab = oldconf->ht_capab; |
| hapd->iconf->vht_capab = oldconf->vht_capab; |
| hapd->iconf->vht_oper_chwidth = oldconf->vht_oper_chwidth; |
| hapd->iconf->vht_oper_centr_freq_seg0_idx = |
| oldconf->vht_oper_centr_freq_seg0_idx; |
| hapd->iconf->vht_oper_centr_freq_seg1_idx = |
| oldconf->vht_oper_centr_freq_seg1_idx; |
| hapd->conf = newconf->bss[j]; |
| hostapd_reload_bss(hapd); |
| } |
| |
| hostapd_config_free(oldconf); |
| |
| |
| return 0; |
| } |
| |
| |
| static void hostapd_broadcast_key_clear_iface(struct hostapd_data *hapd, |
| char *ifname) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_WEP_KEYS; i++) { |
| if (hostapd_drv_set_key(ifname, hapd, WPA_ALG_NONE, NULL, i, |
| 0, NULL, 0, NULL, 0)) { |
| wpa_printf(MSG_DEBUG, "Failed to clear default " |
| "encryption keys (ifname=%s keyidx=%d)", |
| ifname, i); |
| } |
| } |
| #ifdef CONFIG_IEEE80211W |
| if (hapd->conf->ieee80211w) { |
| for (i = NUM_WEP_KEYS; i < NUM_WEP_KEYS + 2; i++) { |
| if (hostapd_drv_set_key(ifname, hapd, WPA_ALG_NONE, |
| NULL, i, 0, NULL, |
| 0, NULL, 0)) { |
| wpa_printf(MSG_DEBUG, "Failed to clear " |
| "default mgmt encryption keys " |
| "(ifname=%s keyidx=%d)", ifname, i); |
| } |
| } |
| } |
| #endif /* CONFIG_IEEE80211W */ |
| } |
| |
| |
| static int hostapd_broadcast_wep_clear(struct hostapd_data *hapd) |
| { |
| hostapd_broadcast_key_clear_iface(hapd, hapd->conf->iface); |
| return 0; |
| } |
| |
| |
| static int hostapd_broadcast_wep_set(struct hostapd_data *hapd) |
| { |
| int errors = 0, idx; |
| struct hostapd_ssid *ssid = &hapd->conf->ssid; |
| |
| idx = ssid->wep.idx; |
| if (ssid->wep.default_len && |
| hostapd_drv_set_key(hapd->conf->iface, |
| hapd, WPA_ALG_WEP, broadcast_ether_addr, idx, |
| 1, NULL, 0, ssid->wep.key[idx], |
| ssid->wep.len[idx])) { |
| wpa_printf(MSG_WARNING, "Could not set WEP encryption."); |
| errors++; |
| } |
| |
| return errors; |
| } |
| |
| |
| static void hostapd_free_hapd_data(struct hostapd_data *hapd) |
| { |
| os_free(hapd->probereq_cb); |
| hapd->probereq_cb = NULL; |
| |
| #ifdef CONFIG_P2P |
| wpabuf_free(hapd->p2p_beacon_ie); |
| hapd->p2p_beacon_ie = NULL; |
| wpabuf_free(hapd->p2p_probe_resp_ie); |
| hapd->p2p_probe_resp_ie = NULL; |
| #endif /* CONFIG_P2P */ |
| |
| if (!hapd->started) { |
| wpa_printf(MSG_ERROR, "%s: Interface %s wasn't started", |
| __func__, hapd->conf->iface); |
| return; |
| } |
| hapd->started = 0; |
| |
| wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface); |
| iapp_deinit(hapd->iapp); |
| hapd->iapp = NULL; |
| accounting_deinit(hapd); |
| hostapd_deinit_wpa(hapd); |
| vlan_deinit(hapd); |
| hostapd_acl_deinit(hapd); |
| #ifndef CONFIG_NO_RADIUS |
| radius_client_deinit(hapd->radius); |
| hapd->radius = NULL; |
| radius_das_deinit(hapd->radius_das); |
| hapd->radius_das = NULL; |
| #endif /* CONFIG_NO_RADIUS */ |
| |
| hostapd_deinit_wps(hapd); |
| |
| authsrv_deinit(hapd); |
| |
| if (hapd->interface_added) { |
| hapd->interface_added = 0; |
| if (hostapd_if_remove(hapd, WPA_IF_AP_BSS, hapd->conf->iface)) { |
| wpa_printf(MSG_WARNING, |
| "Failed to remove BSS interface %s", |
| hapd->conf->iface); |
| hapd->interface_added = 1; |
| } else { |
| /* |
| * Since this was a dynamically added interface, the |
| * driver wrapper may have removed its internal instance |
| * and hapd->drv_priv is not valid anymore. |
| */ |
| hapd->drv_priv = NULL; |
| } |
| } |
| |
| wpabuf_free(hapd->time_adv); |
| |
| #ifdef CONFIG_INTERWORKING |
| gas_serv_deinit(hapd); |
| #endif /* CONFIG_INTERWORKING */ |
| |
| bss_load_update_deinit(hapd); |
| ndisc_snoop_deinit(hapd); |
| dhcp_snoop_deinit(hapd); |
| x_snoop_deinit(hapd); |
| |
| #ifdef CONFIG_SQLITE |
| bin_clear_free(hapd->tmp_eap_user.identity, |
| hapd->tmp_eap_user.identity_len); |
| bin_clear_free(hapd->tmp_eap_user.password, |
| hapd->tmp_eap_user.password_len); |
| #endif /* CONFIG_SQLITE */ |
| |
| #ifdef CONFIG_MESH |
| wpabuf_free(hapd->mesh_pending_auth); |
| hapd->mesh_pending_auth = NULL; |
| #endif /* CONFIG_MESH */ |
| } |
| |
| |
| /** |
| * hostapd_cleanup - Per-BSS cleanup (deinitialization) |
| * @hapd: Pointer to BSS data |
| * |
| * This function is used to free all per-BSS data structures and resources. |
| * Most of the modules that are initialized in hostapd_setup_bss() are |
| * deinitialized here. |
| */ |
| static void hostapd_cleanup(struct hostapd_data *hapd) |
| { |
| wpa_printf(MSG_DEBUG, "%s(hapd=%p (%s))", __func__, hapd, |
| hapd->conf->iface); |
| if (hapd->iface->interfaces && |
| hapd->iface->interfaces->ctrl_iface_deinit) |
| hapd->iface->interfaces->ctrl_iface_deinit(hapd); |
| hostapd_free_hapd_data(hapd); |
| } |
| |
| |
| static void hostapd_cleanup_iface_partial(struct hostapd_iface *iface) |
| { |
| wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface); |
| #ifdef CONFIG_IEEE80211N |
| #ifdef NEED_AP_MLME |
| hostapd_stop_setup_timers(iface); |
| #endif /* NEED_AP_MLME */ |
| #endif /* CONFIG_IEEE80211N */ |
| hostapd_free_hw_features(iface->hw_features, iface->num_hw_features); |
| iface->hw_features = NULL; |
| os_free(iface->current_rates); |
| iface->current_rates = NULL; |
| os_free(iface->basic_rates); |
| iface->basic_rates = NULL; |
| ap_list_deinit(iface); |
| } |
| |
| |
| /** |
| * hostapd_cleanup_iface - Complete per-interface cleanup |
| * @iface: Pointer to interface data |
| * |
| * This function is called after per-BSS data structures are deinitialized |
| * with hostapd_cleanup(). |
| */ |
| static void hostapd_cleanup_iface(struct hostapd_iface *iface) |
| { |
| wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface); |
| eloop_cancel_timeout(channel_list_update_timeout, iface, NULL); |
| |
| hostapd_cleanup_iface_partial(iface); |
| hostapd_config_free(iface->conf); |
| iface->conf = NULL; |
| |
| os_free(iface->config_fname); |
| os_free(iface->bss); |
| wpa_printf(MSG_DEBUG, "%s: free iface=%p", __func__, iface); |
| os_free(iface); |
| } |
| |
| |
| static void hostapd_clear_wep(struct hostapd_data *hapd) |
| { |
| if (hapd->drv_priv && !hapd->iface->driver_ap_teardown) { |
| hostapd_set_privacy(hapd, 0); |
| hostapd_broadcast_wep_clear(hapd); |
| } |
| } |
| |
| |
| static int hostapd_setup_encryption(char *iface, struct hostapd_data *hapd) |
| { |
| int i; |
| |
| hostapd_broadcast_wep_set(hapd); |
| |
| if (hapd->conf->ssid.wep.default_len) { |
| hostapd_set_privacy(hapd, 1); |
| return 0; |
| } |
| |
| /* |
| * When IEEE 802.1X is not enabled, the driver may need to know how to |
| * set authentication algorithms for static WEP. |
| */ |
| hostapd_drv_set_authmode(hapd, hapd->conf->auth_algs); |
| |
| for (i = 0; i < 4; i++) { |
| if (hapd->conf->ssid.wep.key[i] && |
| hostapd_drv_set_key(iface, hapd, WPA_ALG_WEP, NULL, i, |
| i == hapd->conf->ssid.wep.idx, NULL, 0, |
| hapd->conf->ssid.wep.key[i], |
| hapd->conf->ssid.wep.len[i])) { |
| wpa_printf(MSG_WARNING, "Could not set WEP " |
| "encryption."); |
| return -1; |
| } |
| if (hapd->conf->ssid.wep.key[i] && |
| i == hapd->conf->ssid.wep.idx) |
| hostapd_set_privacy(hapd, 1); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int hostapd_flush_old_stations(struct hostapd_data *hapd, u16 reason) |
| { |
| int ret = 0; |
| u8 addr[ETH_ALEN]; |
| |
| if (hostapd_drv_none(hapd) || hapd->drv_priv == NULL) |
| return 0; |
| |
| if (!hapd->iface->driver_ap_teardown) { |
| wpa_dbg(hapd->msg_ctx, MSG_DEBUG, |
| "Flushing old station entries"); |
| |
| if (hostapd_flush(hapd)) { |
| wpa_msg(hapd->msg_ctx, MSG_WARNING, |
| "Could not connect to kernel driver"); |
| ret = -1; |
| } |
| } |
| wpa_dbg(hapd->msg_ctx, MSG_DEBUG, "Deauthenticate all stations"); |
| os_memset(addr, 0xff, ETH_ALEN); |
| hostapd_drv_sta_deauth(hapd, addr, reason); |
| hostapd_free_stas(hapd); |
| |
| return ret; |
| } |
| |
| |
| static void hostapd_bss_deinit_no_free(struct hostapd_data *hapd) |
| { |
| hostapd_free_stas(hapd); |
| hostapd_flush_old_stations(hapd, WLAN_REASON_DEAUTH_LEAVING); |
| hostapd_clear_wep(hapd); |
| } |
| |
| |
| /** |
| * hostapd_validate_bssid_configuration - Validate BSSID configuration |
| * @iface: Pointer to interface data |
| * Returns: 0 on success, -1 on failure |
| * |
| * This function is used to validate that the configured BSSIDs are valid. |
| */ |
| static int hostapd_validate_bssid_configuration(struct hostapd_iface *iface) |
| { |
| u8 mask[ETH_ALEN] = { 0 }; |
| struct hostapd_data *hapd = iface->bss[0]; |
| unsigned int i = iface->conf->num_bss, bits = 0, j; |
| int auto_addr = 0; |
| |
| if (hostapd_drv_none(hapd)) |
| return 0; |
| |
| /* Generate BSSID mask that is large enough to cover the BSSIDs. */ |
| |
| /* Determine the bits necessary to cover the number of BSSIDs. */ |
| for (i--; i; i >>= 1) |
| bits++; |
| |
| /* Determine the bits necessary to any configured BSSIDs, |
| if they are higher than the number of BSSIDs. */ |
| for (j = 0; j < iface->conf->num_bss; j++) { |
| if (hostapd_mac_comp_empty(iface->conf->bss[j]->bssid) == 0) { |
| if (j) |
| auto_addr++; |
| continue; |
| } |
| |
| for (i = 0; i < ETH_ALEN; i++) { |
| mask[i] |= |
| iface->conf->bss[j]->bssid[i] ^ |
| hapd->own_addr[i]; |
| } |
| } |
| |
| if (!auto_addr) |
| goto skip_mask_ext; |
| |
| for (i = 0; i < ETH_ALEN && mask[i] == 0; i++) |
| ; |
| j = 0; |
| if (i < ETH_ALEN) { |
| j = (5 - i) * 8; |
| |
| while (mask[i] != 0) { |
| mask[i] >>= 1; |
| j++; |
| } |
| } |
| |
| if (bits < j) |
| bits = j; |
| |
| if (bits > 40) { |
| wpa_printf(MSG_ERROR, "Too many bits in the BSSID mask (%u)", |
| bits); |
| return -1; |
| } |
| |
| os_memset(mask, 0xff, ETH_ALEN); |
| j = bits / 8; |
| for (i = 5; i > 5 - j; i--) |
| mask[i] = 0; |
| j = bits % 8; |
| while (j--) |
| mask[i] <<= 1; |
| |
| skip_mask_ext: |
| wpa_printf(MSG_DEBUG, "BSS count %lu, BSSID mask " MACSTR " (%d bits)", |
| (unsigned long) iface->conf->num_bss, MAC2STR(mask), bits); |
| |
| if (!auto_addr) |
| return 0; |
| |
| for (i = 0; i < ETH_ALEN; i++) { |
| if ((hapd->own_addr[i] & mask[i]) != hapd->own_addr[i]) { |
| wpa_printf(MSG_ERROR, "Invalid BSSID mask " MACSTR |
| " for start address " MACSTR ".", |
| MAC2STR(mask), MAC2STR(hapd->own_addr)); |
| wpa_printf(MSG_ERROR, "Start address must be the " |
| "first address in the block (i.e., addr " |
| "AND mask == addr)."); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| static int mac_in_conf(struct hostapd_config *conf, const void *a) |
| { |
| size_t i; |
| |
| for (i = 0; i < conf->num_bss; i++) { |
| if (hostapd_mac_comp(conf->bss[i]->bssid, a) == 0) { |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| #ifndef CONFIG_NO_RADIUS |
| |
| static int hostapd_das_nas_mismatch(struct hostapd_data *hapd, |
| struct radius_das_attrs *attr) |
| { |
| if (attr->nas_identifier && |
| (!hapd->conf->nas_identifier || |
| os_strlen(hapd->conf->nas_identifier) != |
| attr->nas_identifier_len || |
| os_memcmp(hapd->conf->nas_identifier, attr->nas_identifier, |
| attr->nas_identifier_len) != 0)) { |
| wpa_printf(MSG_DEBUG, "RADIUS DAS: NAS-Identifier mismatch"); |
| return 1; |
| } |
| |
| if (attr->nas_ip_addr && |
| (hapd->conf->own_ip_addr.af != AF_INET || |
| os_memcmp(&hapd->conf->own_ip_addr.u.v4, attr->nas_ip_addr, 4) != |
| 0)) { |
| wpa_printf(MSG_DEBUG, "RADIUS DAS: NAS-IP-Address mismatch"); |
| return 1; |
| } |
| |
| #ifdef CONFIG_IPV6 |
| if (attr->nas_ipv6_addr && |
| (hapd->conf->own_ip_addr.af != AF_INET6 || |
| os_memcmp(&hapd->conf->own_ip_addr.u.v6, attr->nas_ipv6_addr, 16) |
| != 0)) { |
| wpa_printf(MSG_DEBUG, "RADIUS DAS: NAS-IPv6-Address mismatch"); |
| return 1; |
| } |
| #endif /* CONFIG_IPV6 */ |
| |
| return 0; |
| } |
| |
| |
| static struct sta_info * hostapd_das_find_sta(struct hostapd_data *hapd, |
| struct radius_das_attrs *attr, |
| int *multi) |
| { |
| struct sta_info *selected, *sta; |
| char buf[128]; |
| int num_attr = 0; |
| int count; |
| |
| *multi = 0; |
| |
| for (sta = hapd->sta_list; sta; sta = sta->next) |
| sta->radius_das_match = 1; |
| |
| if (attr->sta_addr) { |
| num_attr++; |
| sta = ap_get_sta(hapd, attr->sta_addr); |
| if (!sta) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: No Calling-Station-Id match"); |
| return NULL; |
| } |
| |
| selected = sta; |
| for (sta = hapd->sta_list; sta; sta = sta->next) { |
| if (sta != selected) |
| sta->radius_das_match = 0; |
| } |
| wpa_printf(MSG_DEBUG, "RADIUS DAS: Calling-Station-Id match"); |
| } |
| |
| if (attr->acct_session_id) { |
| num_attr++; |
| if (attr->acct_session_id_len != 17) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: Acct-Session-Id cannot match"); |
| return NULL; |
| } |
| count = 0; |
| |
| for (sta = hapd->sta_list; sta; sta = sta->next) { |
| if (!sta->radius_das_match) |
| continue; |
| os_snprintf(buf, sizeof(buf), "%08X-%08X", |
| sta->acct_session_id_hi, |
| sta->acct_session_id_lo); |
| if (os_memcmp(attr->acct_session_id, buf, 17) != 0) |
| sta->radius_das_match = 0; |
| else |
| count++; |
| } |
| |
| if (count == 0) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: No matches remaining after Acct-Session-Id check"); |
| return NULL; |
| } |
| wpa_printf(MSG_DEBUG, "RADIUS DAS: Acct-Session-Id match"); |
| } |
| |
| if (attr->acct_multi_session_id) { |
| num_attr++; |
| if (attr->acct_multi_session_id_len != 17) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: Acct-Multi-Session-Id cannot match"); |
| return NULL; |
| } |
| count = 0; |
| |
| for (sta = hapd->sta_list; sta; sta = sta->next) { |
| if (!sta->radius_das_match) |
| continue; |
| if (!sta->eapol_sm || |
| !sta->eapol_sm->acct_multi_session_id_hi) { |
| sta->radius_das_match = 0; |
| continue; |
| } |
| os_snprintf(buf, sizeof(buf), "%08X+%08X", |
| sta->eapol_sm->acct_multi_session_id_hi, |
| sta->eapol_sm->acct_multi_session_id_lo); |
| if (os_memcmp(attr->acct_multi_session_id, buf, 17) != |
| 0) |
| sta->radius_das_match = 0; |
| else |
| count++; |
| } |
| |
| if (count == 0) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: No matches remaining after Acct-Multi-Session-Id check"); |
| return NULL; |
| } |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: Acct-Multi-Session-Id match"); |
| } |
| |
| if (attr->cui) { |
| num_attr++; |
| count = 0; |
| |
| for (sta = hapd->sta_list; sta; sta = sta->next) { |
| struct wpabuf *cui; |
| |
| if (!sta->radius_das_match) |
| continue; |
| cui = ieee802_1x_get_radius_cui(sta->eapol_sm); |
| if (!cui || wpabuf_len(cui) != attr->cui_len || |
| os_memcmp(wpabuf_head(cui), attr->cui, |
| attr->cui_len) != 0) |
| sta->radius_das_match = 0; |
| else |
| count++; |
| } |
| |
| if (count == 0) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: No matches remaining after Chargeable-User-Identity check"); |
| return NULL; |
| } |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: Chargeable-User-Identity match"); |
| } |
| |
| if (attr->user_name) { |
| num_attr++; |
| count = 0; |
| |
| for (sta = hapd->sta_list; sta; sta = sta->next) { |
| u8 *identity; |
| size_t identity_len; |
| |
| if (!sta->radius_das_match) |
| continue; |
| identity = ieee802_1x_get_identity(sta->eapol_sm, |
| &identity_len); |
| if (!identity || |
| identity_len != attr->user_name_len || |
| os_memcmp(identity, attr->user_name, identity_len) |
| != 0) |
| sta->radius_das_match = 0; |
| else |
| count++; |
| } |
| |
| if (count == 0) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: No matches remaining after User-Name check"); |
| return NULL; |
| } |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: User-Name match"); |
| } |
| |
| if (num_attr == 0) { |
| /* |
| * In theory, we could match all current associations, but it |
| * seems safer to just reject requests that do not include any |
| * session identification attributes. |
| */ |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: No session identification attributes included"); |
| return NULL; |
| } |
| |
| selected = NULL; |
| for (sta = hapd->sta_list; sta; sta = sta->next) { |
| if (sta->radius_das_match) { |
| if (selected) { |
| *multi = 1; |
| return NULL; |
| } |
| selected = sta; |
| } |
| } |
| |
| return selected; |
| } |
| |
| |
| static int hostapd_das_disconnect_pmksa(struct hostapd_data *hapd, |
| struct radius_das_attrs *attr) |
| { |
| if (!hapd->wpa_auth) |
| return -1; |
| return wpa_auth_radius_das_disconnect_pmksa(hapd->wpa_auth, attr); |
| } |
| |
| |
| static enum radius_das_res |
| hostapd_das_disconnect(void *ctx, struct radius_das_attrs *attr) |
| { |
| struct hostapd_data *hapd = ctx; |
| struct sta_info *sta; |
| int multi; |
| |
| if (hostapd_das_nas_mismatch(hapd, attr)) |
| return RADIUS_DAS_NAS_MISMATCH; |
| |
| sta = hostapd_das_find_sta(hapd, attr, &multi); |
| if (sta == NULL) { |
| if (multi) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: Multiple sessions match - not supported"); |
| return RADIUS_DAS_MULTI_SESSION_MATCH; |
| } |
| if (hostapd_das_disconnect_pmksa(hapd, attr) == 0) { |
| wpa_printf(MSG_DEBUG, |
| "RADIUS DAS: PMKSA cache entry matched"); |
| return RADIUS_DAS_SUCCESS; |
| } |
| wpa_printf(MSG_DEBUG, "RADIUS DAS: No matching session found"); |
| return RADIUS_DAS_SESSION_NOT_FOUND; |
| } |
| |
| wpa_printf(MSG_DEBUG, "RADIUS DAS: Found a matching session " MACSTR |
| " - disconnecting", MAC2STR(sta->addr)); |
| wpa_auth_pmksa_remove(hapd->wpa_auth, sta->addr); |
| |
| hostapd_drv_sta_deauth(hapd, sta->addr, |
| WLAN_REASON_PREV_AUTH_NOT_VALID); |
| ap_sta_deauthenticate(hapd, sta, WLAN_REASON_PREV_AUTH_NOT_VALID); |
| |
| return RADIUS_DAS_SUCCESS; |
| } |
| |
| #endif /* CONFIG_NO_RADIUS */ |
| |
| |
| /** |
| * hostapd_setup_bss - Per-BSS setup (initialization) |
| * @hapd: Pointer to BSS data |
| * @first: Whether this BSS is the first BSS of an interface; -1 = not first, |
| * but interface may exist |
| * |
| * This function is used to initialize all per-BSS data structures and |
| * resources. This gets called in a loop for each BSS when an interface is |
| * initialized. Most of the modules that are initialized here will be |
| * deinitialized in hostapd_cleanup(). |
| */ |
| static int hostapd_setup_bss(struct hostapd_data *hapd, int first) |
| { |
| struct hostapd_bss_config *conf = hapd->conf; |
| u8 ssid[HOSTAPD_MAX_SSID_LEN + 1]; |
| int ssid_len, set_ssid; |
| char force_ifname[IFNAMSIZ]; |
| u8 if_addr[ETH_ALEN]; |
| int flush_old_stations = 1; |
| |
| wpa_printf(MSG_DEBUG, "%s(hapd=%p (%s), first=%d)", |
| __func__, hapd, conf->iface, first); |
| |
| #ifdef EAP_SERVER_TNC |
| if (conf->tnc && tncs_global_init() < 0) { |
| wpa_printf(MSG_ERROR, "Failed to initialize TNCS"); |
| return -1; |
| } |
| #endif /* EAP_SERVER_TNC */ |
| |
| if (hapd->started) { |
| wpa_printf(MSG_ERROR, "%s: Interface %s was already started", |
| __func__, conf->iface); |
| return -1; |
| } |
| hapd->started = 1; |
| |
| if (!first || first == -1) { |
| if (hostapd_mac_comp_empty(conf->bssid) == 0) { |
| /* Allocate the next available BSSID. */ |
| do { |
| inc_byte_array(hapd->own_addr, ETH_ALEN); |
| } while (mac_in_conf(hapd->iconf, hapd->own_addr)); |
| } else { |
| /* Allocate the configured BSSID. */ |
| os_memcpy(hapd->own_addr, conf->bssid, ETH_ALEN); |
| |
| if (hostapd_mac_comp(hapd->own_addr, |
| hapd->iface->bss[0]->own_addr) == |
| 0) { |
| wpa_printf(MSG_ERROR, "BSS '%s' may not have " |
| "BSSID set to the MAC address of " |
| "the radio", conf->iface); |
| return -1; |
| } |
| } |
| |
| hapd->interface_added = 1; |
| if (hostapd_if_add(hapd->iface->bss[0], WPA_IF_AP_BSS, |
| conf->iface, hapd->own_addr, hapd, |
| &hapd->drv_priv, force_ifname, if_addr, |
| conf->bridge[0] ? conf->bridge : NULL, |
| first == -1)) { |
| wpa_printf(MSG_ERROR, "Failed to add BSS (BSSID=" |
| MACSTR ")", MAC2STR(hapd->own_addr)); |
| hapd->interface_added = 0; |
| return -1; |
| } |
| } |
| |
| if (conf->wmm_enabled < 0) |
| conf->wmm_enabled = hapd->iconf->ieee80211n; |
| |
| #ifdef CONFIG_MESH |
| if (hapd->iface->mconf == NULL) |
| flush_old_stations = 0; |
| #endif /* CONFIG_MESH */ |
| |
| if (flush_old_stations) |
| hostapd_flush_old_stations(hapd, |
| WLAN_REASON_PREV_AUTH_NOT_VALID); |
| hostapd_set_privacy(hapd, 0); |
| |
| hostapd_broadcast_wep_clear(hapd); |
| if (hostapd_setup_encryption(conf->iface, hapd)) |
| return -1; |
| |
| /* |
| * Fetch the SSID from the system and use it or, |
| * if one was specified in the config file, verify they |
| * match. |
| */ |
| ssid_len = hostapd_get_ssid(hapd, ssid, sizeof(ssid)); |
| if (ssid_len < 0) { |
| wpa_printf(MSG_ERROR, "Could not read SSID from system"); |
| return -1; |
| } |
| if (conf->ssid.ssid_set) { |
| /* |
| * If SSID is specified in the config file and it differs |
| * from what is being used then force installation of the |
| * new SSID. |
| */ |
| set_ssid = (conf->ssid.ssid_len != (size_t) ssid_len || |
| os_memcmp(conf->ssid.ssid, ssid, ssid_len) != 0); |
| } else { |
| /* |
| * No SSID in the config file; just use the one we got |
| * from the system. |
| */ |
| set_ssid = 0; |
| conf->ssid.ssid_len = ssid_len; |
| os_memcpy(conf->ssid.ssid, ssid, conf->ssid.ssid_len); |
| } |
| |
| if (!hostapd_drv_none(hapd)) { |
| wpa_printf(MSG_ERROR, "Using interface %s with hwaddr " MACSTR |
| " and ssid \"%s\"", |
| conf->iface, MAC2STR(hapd->own_addr), |
| wpa_ssid_txt(conf->ssid.ssid, conf->ssid.ssid_len)); |
| } |
| |
| if (hostapd_setup_wpa_psk(conf)) { |
| wpa_printf(MSG_ERROR, "WPA-PSK setup failed."); |
| return -1; |
| } |
| |
| /* Set SSID for the kernel driver (to be used in beacon and probe |
| * response frames) */ |
| if (set_ssid && hostapd_set_ssid(hapd, conf->ssid.ssid, |
| conf->ssid.ssid_len)) { |
| wpa_printf(MSG_ERROR, "Could not set SSID for kernel driver"); |
| return -1; |
| } |
| |
| if (wpa_debug_level <= MSG_MSGDUMP) |
| conf->radius->msg_dumps = 1; |
| #ifndef CONFIG_NO_RADIUS |
| hapd->radius = radius_client_init(hapd, conf->radius); |
| if (hapd->radius == NULL) { |
| wpa_printf(MSG_ERROR, "RADIUS client initialization failed."); |
| return -1; |
| } |
| |
| if (conf->radius_das_port) { |
| struct radius_das_conf das_conf; |
| os_memset(&das_conf, 0, sizeof(das_conf)); |
| das_conf.port = conf->radius_das_port; |
| das_conf.shared_secret = conf->radius_das_shared_secret; |
| das_conf.shared_secret_len = |
| conf->radius_das_shared_secret_len; |
| das_conf.client_addr = &conf->radius_das_client_addr; |
| das_conf.time_window = conf->radius_das_time_window; |
| das_conf.require_event_timestamp = |
| conf->radius_das_require_event_timestamp; |
| das_conf.ctx = hapd; |
| das_conf.disconnect = hostapd_das_disconnect; |
| hapd->radius_das = radius_das_init(&das_conf); |
| if (hapd->radius_das == NULL) { |
| wpa_printf(MSG_ERROR, "RADIUS DAS initialization " |
| "failed."); |
| return -1; |
| } |
| } |
| #endif /* CONFIG_NO_RADIUS */ |
| |
| if (hostapd_acl_init(hapd)) { |
| wpa_printf(MSG_ERROR, "ACL initialization failed."); |
| return -1; |
| } |
| if (hostapd_init_wps(hapd, conf)) |
| return -1; |
| |
| if (authsrv_init(hapd) < 0) |
| return -1; |
| |
| if (ieee802_1x_init(hapd)) { |
| wpa_printf(MSG_ERROR, "IEEE 802.1X initialization failed."); |
| return -1; |
| } |
| |
| if ((conf->wpa || conf->osen) && hostapd_setup_wpa(hapd)) |
| return -1; |
| |
| if (accounting_init(hapd)) { |
| wpa_printf(MSG_ERROR, "Accounting initialization failed."); |
| return -1; |
| } |
| |
| if (conf->ieee802_11f && |
| (hapd->iapp = iapp_init(hapd, conf->iapp_iface)) == NULL) { |
| wpa_printf(MSG_ERROR, "IEEE 802.11F (IAPP) initialization " |
| "failed."); |
| return -1; |
| } |
| |
| #ifdef CONFIG_INTERWORKING |
| if (gas_serv_init(hapd)) { |
| wpa_printf(MSG_ERROR, "GAS server initialization failed"); |
| return -1; |
| } |
| |
| if (conf->qos_map_set_len && |
| hostapd_drv_set_qos_map(hapd, conf->qos_map_set, |
| conf->qos_map_set_len)) { |
| wpa_printf(MSG_ERROR, "Failed to initialize QoS Map"); |
| return -1; |
| } |
| #endif /* CONFIG_INTERWORKING */ |
| |
| if (conf->bss_load_update_period && bss_load_update_init(hapd)) { |
| wpa_printf(MSG_ERROR, "BSS Load initialization failed"); |
| return -1; |
| } |
| |
| if (conf->proxy_arp) { |
| if (x_snoop_init(hapd)) { |
| wpa_printf(MSG_ERROR, |
| "Generic snooping infrastructure initialization failed"); |
| return -1; |
| } |
| |
| if (dhcp_snoop_init(hapd)) { |
| wpa_printf(MSG_ERROR, |
| "DHCP snooping initialization failed"); |
| return -1; |
| } |
| |
| if (ndisc_snoop_init(hapd)) { |
| wpa_printf(MSG_ERROR, |
| "Neighbor Discovery snooping initialization failed"); |
| return -1; |
| } |
| } |
| |
| if (!hostapd_drv_none(hapd) && vlan_init(hapd)) { |
| wpa_printf(MSG_ERROR, "VLAN initialization failed."); |
| return -1; |
| } |
| |
| if (!conf->start_disabled && ieee802_11_set_beacon(hapd) < 0) |
| return -1; |
| |
| if (hapd->wpa_auth && wpa_init_keys(hapd->wpa_auth) < 0) |
| return -1; |
| |
| if (hapd->driver && hapd->driver->set_operstate) |
| hapd->driver->set_operstate(hapd->drv_priv, 1); |
| |
| return 0; |
| } |
| |
| |
| static void hostapd_tx_queue_params(struct hostapd_iface *iface) |
| { |
| struct hostapd_data *hapd = iface->bss[0]; |
| int i; |
| struct hostapd_tx_queue_params *p; |
| |
| #ifdef CONFIG_MESH |
| if (iface->mconf == NULL) |
| return; |
| #endif /* CONFIG_MESH */ |
| |
| for (i = 0; i < NUM_TX_QUEUES; i++) { |
| p = &iface->conf->tx_queue[i]; |
| |
| if (hostapd_set_tx_queue_params(hapd, i, p->aifs, p->cwmin, |
| p->cwmax, p->burst)) { |
| wpa_printf(MSG_DEBUG, "Failed to set TX queue " |
| "parameters for queue %d.", i); |
| /* Continue anyway */ |
| } |
| } |
| } |
| |
| |
| static int hostapd_set_acl_list(struct hostapd_data *hapd, |
| struct mac_acl_entry *mac_acl, |
| int n_entries, u8 accept_acl) |
| { |
| struct hostapd_acl_params *acl_params; |
| int i, err; |
| |
| acl_params = os_zalloc(sizeof(*acl_params) + |
| (n_entries * sizeof(acl_params->mac_acl[0]))); |
| if (!acl_params) |
| return -ENOMEM; |
| |
| for (i = 0; i < n_entries; i++) |
| os_memcpy(acl_params->mac_acl[i].addr, mac_acl[i].addr, |
| ETH_ALEN); |
| |
| acl_params->acl_policy = accept_acl; |
| acl_params->num_mac_acl = n_entries; |
| |
| err = hostapd_drv_set_acl(hapd, acl_params); |
| |
| os_free(acl_params); |
| |
| return err; |
| } |
| |
| |
| static void hostapd_set_acl(struct hostapd_data *hapd) |
| { |
| struct hostapd_config *conf = hapd->iconf; |
| int err; |
| u8 accept_acl; |
| |
| if (hapd->iface->drv_max_acl_mac_addrs == 0) |
| return; |
| |
| if (conf->bss[0]->macaddr_acl == DENY_UNLESS_ACCEPTED) { |
| accept_acl = 1; |
| err = hostapd_set_acl_list(hapd, conf->bss[0]->accept_mac, |
| conf->bss[0]->num_accept_mac, |
| accept_acl); |
| if (err) { |
| wpa_printf(MSG_DEBUG, "Failed to set accept acl"); |
| return; |
| } |
| } else if (conf->bss[0]->macaddr_acl == ACCEPT_UNLESS_DENIED) { |
| accept_acl = 0; |
| err = hostapd_set_acl_list(hapd, conf->bss[0]->deny_mac, |
| conf->bss[0]->num_deny_mac, |
| accept_acl); |
| if (err) { |
| wpa_printf(MSG_DEBUG, "Failed to set deny acl"); |
| return; |
| } |
| } |
| } |
| |
| |
| static int start_ctrl_iface_bss(struct hostapd_data *hapd) |
| { |
| if (!hapd->iface->interfaces || |
| !hapd->iface->interfaces->ctrl_iface_init) |
| return 0; |
| |
| if (hapd->iface->interfaces->ctrl_iface_init(hapd)) { |
| wpa_printf(MSG_ERROR, |
| "Failed to setup control interface for %s", |
| hapd->conf->iface); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int start_ctrl_iface(struct hostapd_iface *iface) |
| { |
| size_t i; |
| |
| if (!iface->interfaces || !iface->interfaces->ctrl_iface_init) |
| return 0; |
| |
| for (i = 0; i < iface->num_bss; i++) { |
| struct hostapd_data *hapd = iface->bss[i]; |
| if (iface->interfaces->ctrl_iface_init(hapd)) { |
| wpa_printf(MSG_ERROR, |
| "Failed to setup control interface for %s", |
| hapd->conf->iface); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| static void channel_list_update_timeout(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct hostapd_iface *iface = eloop_ctx; |
| |
| if (!iface->wait_channel_update) { |
| wpa_printf(MSG_INFO, "Channel list update timeout, but interface was not waiting for it"); |
| return; |
| } |
| |
| /* |
| * It is possible that the existing channel list is acceptable, so try |
| * to proceed. |
| */ |
| wpa_printf(MSG_DEBUG, "Channel list update timeout - try to continue anyway"); |
| setup_interface2(iface); |
| } |
| |
| |
| void hostapd_channel_list_updated(struct hostapd_iface *iface, int initiator) |
| { |
| if (!iface->wait_channel_update || initiator != REGDOM_SET_BY_USER) |
| return; |
| |
| wpa_printf(MSG_DEBUG, "Channel list updated - continue setup"); |
| eloop_cancel_timeout(channel_list_update_timeout, iface, NULL); |
| setup_interface2(iface); |
| } |
| |
| |
| static int setup_interface(struct hostapd_iface *iface) |
| { |
| struct hostapd_data *hapd = iface->bss[0]; |
| size_t i; |
| |
| /* |
| * It is possible that setup_interface() is called after the interface |
| * was disabled etc., in which case driver_ap_teardown is possibly set |
| * to 1. Clear it here so any other key/station deletion, which is not |
| * part of a teardown flow, would also call the relevant driver |
| * callbacks. |
| */ |
| iface->driver_ap_teardown = 0; |
| |
| if (!iface->phy[0]) { |
| const char *phy = hostapd_drv_get_radio_name(hapd); |
| if (phy) { |
| wpa_printf(MSG_DEBUG, "phy: %s", phy); |
| os_strlcpy(iface->phy, phy, sizeof(iface->phy)); |
| } |
| } |
| |
| /* |
| * Make sure that all BSSes get configured with a pointer to the same |
| * driver interface. |
| */ |
| for (i = 1; i < iface->num_bss; i++) { |
| iface->bss[i]->driver = hapd->driver; |
| iface->bss[i]->drv_priv = hapd->drv_priv; |
| } |
| |
| if (hostapd_validate_bssid_configuration(iface)) |
| return -1; |
| |
| /* |
| * Initialize control interfaces early to allow external monitoring of |
| * channel setup operations that may take considerable amount of time |
| * especially for DFS cases. |
| */ |
| if (start_ctrl_iface(iface)) |
| return -1; |
| |
| if (hapd->iconf->country[0] && hapd->iconf->country[1]) { |
| char country[4], previous_country[4]; |
| |
| hostapd_set_state(iface, HAPD_IFACE_COUNTRY_UPDATE); |
| if (hostapd_get_country(hapd, previous_country) < 0) |
| previous_country[0] = '\0'; |
| |
| os_memcpy(country, hapd->iconf->country, 3); |
| country[3] = '\0'; |
| if (hostapd_set_country(hapd, country) < 0) { |
| wpa_printf(MSG_ERROR, "Failed to set country code"); |
| return -1; |
| } |
| |
| wpa_printf(MSG_DEBUG, "Previous country code %s, new country code %s", |
| previous_country, country); |
| |
| if (os_strncmp(previous_country, country, 2) != 0) { |
| wpa_printf(MSG_DEBUG, "Continue interface setup after channel list update"); |
| iface->wait_channel_update = 1; |
| eloop_register_timeout(5, 0, |
| channel_list_update_timeout, |
| iface, NULL); |
| return 0; |
| } |
| } |
| |
| return setup_interface2(iface); |
| } |
| |
| |
| static int setup_interface2(struct hostapd_iface *iface) |
| { |
| iface->wait_channel_update = 0; |
| |
| if (hostapd_get_hw_features(iface)) { |
| /* Not all drivers support this yet, so continue without hw |
| * feature data. */ |
| } else { |
| int ret = hostapd_select_hw_mode(iface); |
| if (ret < 0) { |
| wpa_printf(MSG_ERROR, "Could not select hw_mode and " |
| "channel. (%d)", ret); |
| goto fail; |
| } |
| if (ret == 1) { |
| wpa_printf(MSG_DEBUG, "Interface initialization will be completed in a callback (ACS)"); |
| return 0; |
| } |
| ret = hostapd_check_ht_capab(iface); |
| if (ret < 0) |
| goto fail; |
| if (ret == 1) { |
| wpa_printf(MSG_DEBUG, "Interface initialization will " |
| "be completed in a callback"); |
| return 0; |
| } |
| |
| if (iface->conf->ieee80211h) |
| wpa_printf(MSG_DEBUG, "DFS support is enabled"); |
| } |
| return hostapd_setup_interface_complete(iface, 0); |
| |
| fail: |
| hostapd_set_state(iface, HAPD_IFACE_DISABLED); |
| wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, AP_EVENT_DISABLED); |
| if (iface->interfaces && iface->interfaces->terminate_on_error) |
| eloop_terminate(); |
| return -1; |
| } |
| |
| |
| /** |
| * hostapd_setup_interface_complete - Complete interface setup |
| * |
| * This function is called when previous steps in the interface setup has been |
| * completed. This can also start operations, e.g., DFS, that will require |
| * additional processing before interface is ready to be enabled. Such |
| * operations will call this function from eloop callbacks when finished. |
| */ |
| int hostapd_setup_interface_complete(struct hostapd_iface *iface, int err) |
| { |
| struct hostapd_data *hapd = iface->bss[0]; |
| size_t j; |
| u8 *prev_addr; |
| int delay_apply_cfg = 0; |
| |
| if (err) |
| goto fail; |
| |
| wpa_printf(MSG_DEBUG, "Completing interface initialization"); |
| if (iface->conf->channel) { |
| #ifdef NEED_AP_MLME |
| int res; |
| #endif /* NEED_AP_MLME */ |
| |
| iface->freq = hostapd_hw_get_freq(hapd, iface->conf->channel); |
| wpa_printf(MSG_DEBUG, "Mode: %s Channel: %d " |
| "Frequency: %d MHz", |
| hostapd_hw_mode_txt(iface->conf->hw_mode), |
| iface->conf->channel, iface->freq); |
| |
| #ifdef NEED_AP_MLME |
| /* Handle DFS only if it is not offloaded to the driver */ |
| if (!(iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)) { |
| /* Check DFS */ |
| res = hostapd_handle_dfs(iface); |
| if (res <= 0) { |
| if (res < 0) |
| goto fail; |
| return res; |
| } |
| } |
| #endif /* NEED_AP_MLME */ |
| |
| #ifdef CONFIG_MESH |
| if (iface->mconf != NULL) { |
| wpa_printf(MSG_DEBUG, |
| "%s: Mesh configuration will be applied while joining the mesh network", |
| iface->bss[0]->conf->iface); |
| delay_apply_cfg = 1; |
| } |
| #endif /* CONFIG_MESH */ |
| |
| if (!delay_apply_cfg && |
| hostapd_set_freq(hapd, hapd->iconf->hw_mode, iface->freq, |
| hapd->iconf->channel, |
| hapd->iconf->ieee80211n, |
| hapd->iconf->ieee80211ac, |
| hapd->iconf->secondary_channel, |
| hapd->iconf->vht_oper_chwidth, |
| hapd->iconf->vht_oper_centr_freq_seg0_idx, |
| hapd->iconf->vht_oper_centr_freq_seg1_idx)) { |
| wpa_printf(MSG_ERROR, "Could not set channel for " |
| "kernel driver"); |
| goto fail; |
| } |
| } |
| |
| if (iface->current_mode) { |
| if (hostapd_prepare_rates(iface, iface->current_mode)) { |
| wpa_printf(MSG_ERROR, "Failed to prepare rates " |
| "table."); |
| hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211, |
| HOSTAPD_LEVEL_WARNING, |
| "Failed to prepare rates table."); |
| goto fail; |
| } |
| } |
| |
| if (hapd->iconf->rts_threshold > -1 && |
| hostapd_set_rts(hapd, hapd->iconf->rts_threshold)) { |
| wpa_printf(MSG_ERROR, "Could not set RTS threshold for " |
| "kernel driver"); |
| goto fail; |
| } |
| |
| if (hapd->iconf->fragm_threshold > -1 && |
| hostapd_set_frag(hapd, hapd->iconf->fragm_threshold)) { |
| wpa_printf(MSG_ERROR, "Could not set fragmentation threshold " |
| "for kernel driver"); |
| goto fail; |
| } |
| |
| prev_addr = hapd->own_addr; |
| |
| for (j = 0; j < iface->num_bss; j++) { |
| hapd = iface->bss[j]; |
| if (j) |
| os_memcpy(hapd->own_addr, prev_addr, ETH_ALEN); |
| if (hostapd_setup_bss(hapd, j == 0)) { |
| do { |
| hapd = iface->bss[j]; |
| hostapd_bss_deinit_no_free(hapd); |
| hostapd_free_hapd_data(hapd); |
| } while (j-- > 0); |
| goto fail; |
| } |
| if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0) |
| prev_addr = hapd->own_addr; |
| } |
| hapd = iface->bss[0]; |
| |
| hostapd_tx_queue_params(iface); |
| |
| ap_list_init(iface); |
| |
| hostapd_set_acl(hapd); |
| |
| if (hostapd_driver_commit(hapd) < 0) { |
| wpa_printf(MSG_ERROR, "%s: Failed to commit driver " |
| "configuration", __func__); |
| goto fail; |
| } |
| |
| /* |
| * WPS UPnP module can be initialized only when the "upnp_iface" is up. |
| * If "interface" and "upnp_iface" are the same (e.g., non-bridge |
| * mode), the interface is up only after driver_commit, so initialize |
| * WPS after driver_commit. |
| */ |
| for (j = 0; j < iface->num_bss; j++) { |
| if (hostapd_init_wps_complete(iface->bss[j])) |
| goto fail; |
| } |
| |
| hostapd_set_state(iface, HAPD_IFACE_ENABLED); |
| wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, AP_EVENT_ENABLED); |
| if (hapd->setup_complete_cb) |
| hapd->setup_complete_cb(hapd->setup_complete_cb_ctx); |
| |
| wpa_printf(MSG_DEBUG, "%s: Setup of interface done.", |
| iface->bss[0]->conf->iface); |
| if (iface->interfaces && iface->interfaces->terminate_on_error > 0) |
| iface->interfaces->terminate_on_error--; |
| |
| return 0; |
| |
| fail: |
| wpa_printf(MSG_ERROR, "Interface initialization failed"); |
| hostapd_set_state(iface, HAPD_IFACE_DISABLED); |
| wpa_msg(hapd->msg_ctx, MSG_INFO, AP_EVENT_DISABLED); |
| if (iface->interfaces && iface->interfaces->terminate_on_error) |
| eloop_terminate(); |
| return -1; |
| } |
| |
| |
| /** |
| * hostapd_setup_interface - Setup of an interface |
| * @iface: Pointer to interface data. |
| * Returns: 0 on success, -1 on failure |
| * |
| * Initializes the driver interface, validates the configuration, |
| * and sets driver parameters based on the configuration. |
| * Flushes old stations, sets the channel, encryption, |
| * beacons, and WDS links based on the configuration. |
| * |
| * If interface setup requires more time, e.g., to perform HT co-ex scans, ACS, |
| * or DFS operations, this function returns 0 before such operations have been |
| * completed. The pending operations are registered into eloop and will be |
| * completed from eloop callbacks. Those callbacks end up calling |
| * hostapd_setup_interface_complete() once setup has been completed. |
| */ |
| int hostapd_setup_interface(struct hostapd_iface *iface) |
| { |
| int ret; |
| |
| ret = setup_interface(iface); |
| if (ret) { |
| wpa_printf(MSG_ERROR, "%s: Unable to setup interface.", |
| iface->bss[0]->conf->iface); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * hostapd_alloc_bss_data - Allocate and initialize per-BSS data |
| * @hapd_iface: Pointer to interface data |
| * @conf: Pointer to per-interface configuration |
| * @bss: Pointer to per-BSS configuration for this BSS |
| * Returns: Pointer to allocated BSS data |
| * |
| * This function is used to allocate per-BSS data structure. This data will be |
| * freed after hostapd_cleanup() is called for it during interface |
| * deinitialization. |
| */ |
| struct hostapd_data * |
| hostapd_alloc_bss_data(struct hostapd_iface *hapd_iface, |
| struct hostapd_config *conf, |
| struct hostapd_bss_config *bss) |
| { |
| struct hostapd_data *hapd; |
| |
| hapd = os_zalloc(sizeof(*hapd)); |
| if (hapd == NULL) |
| return NULL; |
| |
| hapd->new_assoc_sta_cb = hostapd_new_assoc_sta; |
| hapd->iconf = conf; |
| hapd->conf = bss; |
| hapd->iface = hapd_iface; |
| hapd->driver = hapd->iconf->driver; |
| hapd->ctrl_sock = -1; |
| |
| return hapd; |
| } |
| |
| |
| static void hostapd_bss_deinit(struct hostapd_data *hapd) |
| { |
| wpa_printf(MSG_DEBUG, "%s: deinit bss %s", __func__, |
| hapd->conf->iface); |
| hostapd_bss_deinit_no_free(hapd); |
| hostapd_cleanup(hapd); |
| } |
| |
| |
| void hostapd_interface_deinit(struct hostapd_iface *iface) |
| { |
| int j; |
| |
| wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface); |
| if (iface == NULL) |
| return; |
| |
| #ifdef CONFIG_IEEE80211N |
| #ifdef NEED_AP_MLME |
| hostapd_stop_setup_timers(iface); |
| eloop_cancel_timeout(ap_ht2040_timeout, iface, NULL); |
| #endif /* NEED_AP_MLME */ |
| #endif /* CONFIG_IEEE80211N */ |
| eloop_cancel_timeout(channel_list_update_timeout, iface, NULL); |
| iface->wait_channel_update = 0; |
| |
| for (j = iface->num_bss - 1; j >= 0; j--) |
| hostapd_bss_deinit(iface->bss[j]); |
| } |
| |
| |
| void hostapd_interface_free(struct hostapd_iface *iface) |
| { |
| size_t j; |
| wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface); |
| for (j = 0; j < iface->num_bss; j++) { |
| wpa_printf(MSG_DEBUG, "%s: free hapd %p", |
| __func__, iface->bss[j]); |
| os_free(iface->bss[j]); |
| } |
| hostapd_cleanup_iface(iface); |
| } |
| |
| |
| /** |
| * hostapd_init - Allocate and initialize per-interface data |
| * @config_file: Path to the configuration file |
| * Returns: Pointer to the allocated interface data or %NULL on failure |
| * |
| * This function is used to allocate main data structures for per-interface |
| * data. The allocated data buffer will be freed by calling |
| * hostapd_cleanup_iface(). |
| */ |
| struct hostapd_iface * hostapd_init(struct hapd_interfaces *interfaces, |
| const char *config_file) |
| { |
| struct hostapd_iface *hapd_iface = NULL; |
| struct hostapd_config *conf = NULL; |
| struct hostapd_data *hapd; |
| size_t i; |
| |
| hapd_iface = os_zalloc(sizeof(*hapd_iface)); |
| if (hapd_iface == NULL) |
| goto fail; |
| |
| hapd_iface->config_fname = os_strdup(config_file); |
| if (hapd_iface->config_fname == NULL) |
| goto fail; |
| |
| conf = interfaces->config_read_cb(hapd_iface->config_fname); |
| if (conf == NULL) |
| goto fail; |
| hapd_iface->conf = conf; |
| |
| hapd_iface->num_bss = conf->num_bss; |
| hapd_iface->bss = os_calloc(conf->num_bss, |
| sizeof(struct hostapd_data *)); |
| if (hapd_iface->bss == NULL) |
| goto fail; |
| |
| for (i = 0; i < conf->num_bss; i++) { |
| hapd = hapd_iface->bss[i] = |
| hostapd_alloc_bss_data(hapd_iface, conf, |
| conf->bss[i]); |
| if (hapd == NULL) |
| goto fail; |
| hapd->msg_ctx = hapd; |
| } |
| |
| return hapd_iface; |
| |
| fail: |
| wpa_printf(MSG_ERROR, "Failed to set up interface with %s", |
| config_file); |
| if (conf) |
| hostapd_config_free(conf); |
| if (hapd_iface) { |
| os_free(hapd_iface->config_fname); |
| os_free(hapd_iface->bss); |
| wpa_printf(MSG_DEBUG, "%s: free iface %p", |
| __func__, hapd_iface); |
| os_free(hapd_iface); |
| } |
| return NULL; |
| } |
| |
| |
| static int ifname_in_use(struct hapd_interfaces *interfaces, const char *ifname) |
| { |
| size_t i, j; |
| |
| for (i = 0; i < interfaces->count; i++) { |
| struct hostapd_iface *iface = interfaces->iface[i]; |
| for (j = 0; j < iface->num_bss; j++) { |
| struct hostapd_data *hapd = iface->bss[j]; |
| if (os_strcmp(ifname, hapd->conf->iface) == 0) |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * hostapd_interface_init_bss - Read configuration file and init BSS data |
| * |
| * This function is used to parse configuration file for a BSS. This BSS is |
| * added to an existing interface sharing the same radio (if any) or a new |
| * interface is created if this is the first interface on a radio. This |
| * allocate memory for the BSS. No actual driver operations are started. |
| * |
| * This is similar to hostapd_interface_init(), but for a case where the |
| * configuration is used to add a single BSS instead of all BSSes for a radio. |
| */ |
| struct hostapd_iface * |
| hostapd_interface_init_bss(struct hapd_interfaces *interfaces, const char *phy, |
| const char *config_fname, int debug) |
| { |
| struct hostapd_iface *new_iface = NULL, *iface = NULL; |
| struct hostapd_data *hapd; |
| int k; |
| size_t i, bss_idx; |
| |
| if (!phy || !*phy) |
| return NULL; |
| |
| for (i = 0; i < interfaces->count; i++) { |
| if (os_strcmp(interfaces->iface[i]->phy, phy) == 0) { |
| iface = interfaces->iface[i]; |
| break; |
| } |
| } |
| |
| wpa_printf(MSG_INFO, "Configuration file: %s (phy %s)%s", |
| config_fname, phy, iface ? "" : " --> new PHY"); |
| if (iface) { |
| struct hostapd_config *conf; |
| struct hostapd_bss_config **tmp_conf; |
| struct hostapd_data **tmp_bss; |
| struct hostapd_bss_config *bss; |
| const char *ifname; |
| |
| /* Add new BSS to existing iface */ |
| conf = interfaces->config_read_cb(config_fname); |
| if (conf == NULL) |
| return NULL; |
| if (conf->num_bss > 1) { |
| wpa_printf(MSG_ERROR, "Multiple BSSes specified in BSS-config"); |
| hostapd_config_free(conf); |
| return NULL; |
| } |
| |
| ifname = conf->bss[0]->iface; |
| if (ifname[0] != '\0' && ifname_in_use(interfaces, ifname)) { |
| wpa_printf(MSG_ERROR, |
| "Interface name %s already in use", ifname); |
| hostapd_config_free(conf); |
| return NULL; |
| } |
| |
| tmp_conf = os_realloc_array( |
| iface->conf->bss, iface->conf->num_bss + 1, |
| sizeof(struct hostapd_bss_config *)); |
| tmp_bss = os_realloc_array(iface->bss, iface->num_bss + 1, |
| sizeof(struct hostapd_data *)); |
| if (tmp_bss) |
| iface->bss = tmp_bss; |
| if (tmp_conf) { |
| iface->conf->bss = tmp_conf; |
| iface->conf->last_bss = tmp_conf[0]; |
| } |
| if (tmp_bss == NULL || tmp_conf == NULL) { |
| hostapd_config_free(conf); |
| return NULL; |
| } |
| bss = iface->conf->bss[iface->conf->num_bss] = conf->bss[0]; |
| iface->conf->num_bss++; |
| |
| hapd = hostapd_alloc_bss_data(iface, iface->conf, bss); |
| if (hapd == NULL) { |
| iface->conf->num_bss--; |
| hostapd_config_free(conf); |
| return NULL; |
| } |
| iface->conf->last_bss = bss; |
| iface->bss[iface->num_bss] = hapd; |
| hapd->msg_ctx = hapd; |
| |
| bss_idx = iface->num_bss++; |
| conf->num_bss--; |
| conf->bss[0] = NULL; |
| hostapd_config_free(conf); |
| } else { |
| /* Add a new iface with the first BSS */ |
| new_iface = iface = hostapd_init(interfaces, config_fname); |
| if (!iface) |
| return NULL; |
| os_strlcpy(iface->phy, phy, sizeof(iface->phy)); |
| iface->interfaces = interfaces; |
| bss_idx = 0; |
| } |
| |
| for (k = 0; k < debug; k++) { |
| if (iface->bss[bss_idx]->conf->logger_stdout_level > 0) |
| iface->bss[bss_idx]->conf->logger_stdout_level--; |
| } |
| |
| if (iface->conf->bss[bss_idx]->iface[0] == '\0' && |
| !hostapd_drv_none(iface->bss[bss_idx])) { |
| wpa_printf(MSG_ERROR, "Interface name not specified in %s", |
| config_fname); |
| if (new_iface) |
| hostapd_interface_deinit_free(new_iface); |
| return NULL; |
| } |
| |
| return iface; |
| } |
| |
| |
| void hostapd_interface_deinit_free(struct hostapd_iface *iface) |
| { |
| const struct wpa_driver_ops *driver; |
| void *drv_priv; |
| |
| wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface); |
| if (iface == NULL) |
| return; |
| wpa_printf(MSG_DEBUG, "%s: num_bss=%u conf->num_bss=%u", |
| __func__, (unsigned int) iface->num_bss, |
| (unsigned int) iface->conf->num_bss); |
| driver = iface->bss[0]->driver; |
| drv_priv = iface->bss[0]->drv_priv; |
| hostapd_interface_deinit(iface); |
| wpa_printf(MSG_DEBUG, "%s: driver=%p drv_priv=%p -> hapd_deinit", |
| __func__, driver, drv_priv); |
| if (driver && driver->hapd_deinit && drv_priv) { |
| driver->hapd_deinit(drv_priv); |
| iface->bss[0]->drv_priv = NULL; |
| } |
| hostapd_interface_free(iface); |
| } |
| |
| |
| static void hostapd_deinit_driver(const struct wpa_driver_ops *driver, |
| void *drv_priv, |
| struct hostapd_iface *hapd_iface) |
| { |
| size_t j; |
| |
| wpa_printf(MSG_DEBUG, "%s: driver=%p drv_priv=%p -> hapd_deinit", |
| __func__, driver, drv_priv); |
| if (driver && driver->hapd_deinit && drv_priv) { |
| driver->hapd_deinit(drv_priv); |
| for (j = 0; j < hapd_iface->num_bss; j++) { |
| wpa_printf(MSG_DEBUG, "%s:bss[%d]->drv_priv=%p", |
| __func__, (int) j, |
| hapd_iface->bss[j]->drv_priv); |
| if (hapd_iface->bss[j]->drv_priv == drv_priv) |
| hapd_iface->bss[j]->drv_priv = NULL; |
| } |
| } |
| } |
| |
| |
| int hostapd_enable_iface(struct hostapd_iface *hapd_iface) |
| { |
| size_t j; |
| |
| if (hapd_iface->bss[0]->drv_priv != NULL) { |
| wpa_printf(MSG_ERROR, "Interface %s already enabled", |
| hapd_iface->conf->bss[0]->iface); |
| return -1; |
| } |
| |
| wpa_printf(MSG_DEBUG, "Enable interface %s", |
| hapd_iface->conf->bss[0]->iface); |
| |
| for (j = 0; j < hapd_iface->num_bss; j++) |
| hostapd_set_security_params(hapd_iface->conf->bss[j], 1); |
| if (hostapd_config_check(hapd_iface->conf, 1) < 0) { |
| wpa_printf(MSG_INFO, "Invalid configuration - cannot enable"); |
| return -1; |
| } |
| |
| if (hapd_iface->interfaces == NULL || |
| hapd_iface->interfaces->driver_init == NULL || |
| hapd_iface->interfaces->driver_init(hapd_iface)) |
| return -1; |
| |
| if (hostapd_setup_interface(hapd_iface)) { |
| hostapd_deinit_driver(hapd_iface->bss[0]->driver, |
| hapd_iface->bss[0]->drv_priv, |
| hapd_iface); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| int hostapd_reload_iface(struct hostapd_iface *hapd_iface) |
| { |
| size_t j; |
| |
| wpa_printf(MSG_DEBUG, "Reload interface %s", |
| hapd_iface->conf->bss[0]->iface); |
| for (j = 0; j < hapd_iface->num_bss; j++) |
| hostapd_set_security_params(hapd_iface->conf->bss[j], 1); |
| if (hostapd_config_check(hapd_iface->conf, 1) < 0) { |
| wpa_printf(MSG_ERROR, "Updated configuration is invalid"); |
| return -1; |
| } |
| hostapd_clear_old(hapd_iface); |
| for (j = 0; j < hapd_iface->num_bss; j++) |
| hostapd_reload_bss(hapd_iface->bss[j]); |
| |
| return 0; |
| } |
| |
| |
| int hostapd_disable_iface(struct hostapd_iface *hapd_iface) |
| { |
| size_t j; |
| const struct wpa_driver_ops *driver; |
| void *drv_priv; |
| |
| if (hapd_iface == NULL) |
| return -1; |
| |
| if (hapd_iface->bss[0]->drv_priv == NULL) { |
| wpa_printf(MSG_INFO, "Interface %s already disabled", |
| hapd_iface->conf->bss[0]->iface); |
| return -1; |
| } |
| |
| wpa_msg(hapd_iface->bss[0]->msg_ctx, MSG_INFO, AP_EVENT_DISABLED); |
| driver = hapd_iface->bss[0]->driver; |
| drv_priv = hapd_iface->bss[0]->drv_priv; |
| |
| hapd_iface->driver_ap_teardown = |
| !!(hapd_iface->drv_flags & |
| WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT); |
| |
| /* same as hostapd_interface_deinit without deinitializing ctrl-iface */ |
| for (j = 0; j < hapd_iface->num_bss; j++) { |
| struct hostapd_data *hapd = hapd_iface->bss[j]; |
| hostapd_bss_deinit_no_free(hapd); |
| hostapd_free_hapd_data(hapd); |
| } |
| |
| hostapd_deinit_driver(driver, drv_priv, hapd_iface); |
| |
| /* From hostapd_cleanup_iface: These were initialized in |
| * hostapd_setup_interface and hostapd_setup_interface_complete |
| */ |
| hostapd_cleanup_iface_partial(hapd_iface); |
| |
| wpa_printf(MSG_DEBUG, "Interface %s disabled", |
| hapd_iface->bss[0]->conf->iface); |
| hostapd_set_state(hapd_iface, HAPD_IFACE_DISABLED); |
| return 0; |
| } |
| |
| |
| static struct hostapd_iface * |
| hostapd_iface_alloc(struct hapd_interfaces *interfaces) |
| { |
| struct hostapd_iface **iface, *hapd_iface; |
| |
| iface = os_realloc_array(interfaces->iface, interfaces->count + 1, |
| sizeof(struct hostapd_iface *)); |
| if (iface == NULL) |
| return NULL; |
| interfaces->iface = iface; |
| hapd_iface = interfaces->iface[interfaces->count] = |
| os_zalloc(sizeof(*hapd_iface)); |
| if (hapd_iface == NULL) { |
| wpa_printf(MSG_ERROR, "%s: Failed to allocate memory for " |
| "the interface", __func__); |
| return NULL; |
| } |
| interfaces->count++; |
| hapd_iface->interfaces = interfaces; |
| |
| return hapd_iface; |
| } |
| |
| |
| static struct hostapd_config * |
| hostapd_config_alloc(struct hapd_interfaces *interfaces, const char *ifname, |
| const char *ctrl_iface) |
| { |
| struct hostapd_bss_config *bss; |
| struct hostapd_config *conf; |
| |
| /* Allocates memory for bss and conf */ |
| conf = hostapd_config_defaults(); |
| if (conf == NULL) { |
| wpa_printf(MSG_ERROR, "%s: Failed to allocate memory for " |
| "configuration", __func__); |
| return NULL; |
| } |
| |
| conf->driver = wpa_drivers[0]; |
| if (conf->driver == NULL) { |
| wpa_printf(MSG_ERROR, "No driver wrappers registered!"); |
| hostapd_config_free(conf); |
| return NULL; |
| } |
| |
| bss = conf->last_bss = conf->bss[0]; |
| |
| os_strlcpy(bss->iface, ifname, sizeof(bss->iface)); |
| bss->ctrl_interface = os_strdup(ctrl_iface); |
| if (bss->ctrl_interface == NULL) { |
| hostapd_config_free(conf); |
| return NULL; |
| } |
| |
| /* Reading configuration file skipped, will be done in SET! |
| * From reading the configuration till the end has to be done in |
| * SET |
| */ |
| return conf; |
| } |
| |
| |
| static int hostapd_data_alloc(struct hostapd_iface *hapd_iface, |
| struct hostapd_config *conf) |
| { |
| size_t i; |
| struct hostapd_data *hapd; |
| |
| hapd_iface->bss = os_calloc(conf->num_bss, |
| sizeof(struct hostapd_data *)); |
| if (hapd_iface->bss == NULL) |
| return -1; |
| |
| for (i = 0; i < conf->num_bss; i++) { |
| hapd = hapd_iface->bss[i] = |
| hostapd_alloc_bss_data(hapd_iface, conf, conf->bss[i]); |
| if (hapd == NULL) { |
| while (i > 0) { |
| i--; |
| os_free(hapd_iface->bss[i]); |
| hapd_iface->bss[i] = NULL; |
| } |
| os_free(hapd_iface->bss); |
| hapd_iface->bss = NULL; |
| return -1; |
| } |
| hapd->msg_ctx = hapd; |
| } |
| |
| hapd_iface->conf = conf; |
| hapd_iface->num_bss = conf->num_bss; |
| |
| return 0; |
| } |
| |
| |
| int hostapd_add_iface(struct hapd_interfaces *interfaces, char *buf) |
| { |
| struct hostapd_config *conf = NULL; |
| struct hostapd_iface *hapd_iface = NULL, *new_iface = NULL; |
| struct hostapd_data *hapd; |
| char *ptr; |
| size_t i, j; |
| const char *conf_file = NULL, *phy_name = NULL; |
| |
| if (os_strncmp(buf, "bss_config=", 11) == 0) { |
| char *pos; |
| phy_name = buf + 11; |
| pos = os_strchr(phy_name, ':'); |
| if (!pos) |
| return -1; |
| *pos++ = '\0'; |
| conf_file = pos; |
| if (!os_strlen(conf_file)) |
| return -1; |
| |
| hapd_iface = hostapd_interface_init_bss(interfaces, phy_name, |
| conf_file, 0); |
| if (!hapd_iface) |
| return -1; |
| for (j = 0; j < interfaces->count; j++) { |
| if (interfaces->iface[j] == hapd_iface) |
| break; |
| } |
| if (j == interfaces->count) { |
| struct hostapd_iface **tmp; |
| tmp = os_realloc_array(interfaces->iface, |
| interfaces->count + 1, |
| sizeof(struct hostapd_iface *)); |
| if (!tmp) { |
| hostapd_interface_deinit_free(hapd_iface); |
| return -1; |
| } |
| interfaces->iface = tmp; |
| interfaces->iface[interfaces->count++] = hapd_iface; |
| new_iface = hapd_iface; |
| } |
| |
| if (new_iface) { |
| if (interfaces->driver_init(hapd_iface)) |
| goto fail; |
| |
| if (hostapd_setup_interface(hapd_iface)) { |
| hostapd_deinit_driver( |
| hapd_iface->bss[0]->driver, |
| hapd_iface->bss[0]->drv_priv, |
| hapd_iface); |
| goto fail; |
| } |
| } else { |
| /* Assign new BSS with bss[0]'s driver info */ |
| hapd = hapd_iface->bss[hapd_iface->num_bss - 1]; |
| hapd->driver = hapd_iface->bss[0]->driver; |
| hapd->drv_priv = hapd_iface->bss[0]->drv_priv; |
| os_memcpy(hapd->own_addr, hapd_iface->bss[0]->own_addr, |
| ETH_ALEN); |
| |
| if (start_ctrl_iface_bss(hapd) < 0 || |
| (hapd_iface->state == HAPD_IFACE_ENABLED && |
| hostapd_setup_bss(hapd, -1))) { |
| hostapd_cleanup(hapd); |
| hapd_iface->bss[hapd_iface->num_bss - 1] = NULL; |
| hapd_iface->conf->num_bss--; |
| hapd_iface->num_bss--; |
| wpa_printf(MSG_DEBUG, "%s: free hapd %p %s", |
| __func__, hapd, hapd->conf->iface); |
| hostapd_config_free_bss(hapd->conf); |
| hapd->conf = NULL; |
| os_free(hapd); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| ptr = os_strchr(buf, ' '); |
| if (ptr == NULL) |
| return -1; |
| *ptr++ = '\0'; |
| |
| if (os_strncmp(ptr, "config=", 7) == 0) |
| conf_file = ptr + 7; |
| |
| for (i = 0; i < interfaces->count; i++) { |
| if (!os_strcmp(interfaces->iface[i]->conf->bss[0]->iface, |
| buf)) { |
| wpa_printf(MSG_INFO, "Cannot add interface - it " |
| "already exists"); |
| return -1; |
| } |
| } |
| |
| hapd_iface = hostapd_iface_alloc(interfaces); |
| if (hapd_iface == NULL) { |
| wpa_printf(MSG_ERROR, "%s: Failed to allocate memory " |
| "for interface", __func__); |
| goto fail; |
| } |
| new_iface = hapd_iface; |
| |
| if (conf_file && interfaces->config_read_cb) { |
| conf = interfaces->config_read_cb(conf_file); |
| if (conf && conf->bss) |
| os_strlcpy(conf->bss[0]->iface, buf, |
| sizeof(conf->bss[0]->iface)); |
| } else |
| conf = hostapd_config_alloc(interfaces, buf, ptr); |
| if (conf == NULL || conf->bss == NULL) { |
| wpa_printf(MSG_ERROR, "%s: Failed to allocate memory " |
| "for configuration", __func__); |
| goto fail; |
| } |
| |
| if (hostapd_data_alloc(hapd_iface, conf) < 0) { |
| wpa_printf(MSG_ERROR, "%s: Failed to allocate memory " |
| "for hostapd", __func__); |
| goto fail; |
| } |
| conf = NULL; |
| |
| if (start_ctrl_iface(hapd_iface) < 0) |
| goto fail; |
| |
| wpa_printf(MSG_INFO, "Add interface '%s'", |
| hapd_iface->conf->bss[0]->iface); |
| |
| return 0; |
| |
| fail: |
| if (conf) |
| hostapd_config_free(conf); |
| if (hapd_iface) { |
| if (hapd_iface->bss) { |
| for (i = 0; i < hapd_iface->num_bss; i++) { |
| hapd = hapd_iface->bss[i]; |
| if (!hapd) |
| continue; |
| if (hapd_iface->interfaces && |
| hapd_iface->interfaces->ctrl_iface_deinit) |
| hapd_iface->interfaces-> |
| ctrl_iface_deinit(hapd); |
| wpa_printf(MSG_DEBUG, "%s: free hapd %p (%s)", |
| __func__, hapd_iface->bss[i], |
| hapd->conf->iface); |
| hostapd_cleanup(hapd); |
| os_free(hapd); |
| hapd_iface->bss[i] = NULL; |
| } |
| os_free(hapd_iface->bss); |
| hapd_iface->bss = NULL; |
| } |
| if (new_iface) { |
| interfaces->count--; |
| interfaces->iface[interfaces->count] = NULL; |
| } |
| hostapd_cleanup_iface(hapd_iface); |
| } |
| return -1; |
| } |
| |
| |
| static int hostapd_remove_bss(struct hostapd_iface *iface, unsigned int idx) |
| { |
| size_t i; |
| |
| wpa_printf(MSG_INFO, "Remove BSS '%s'", iface->conf->bss[idx]->iface); |
| |
| /* Remove hostapd_data only if it has already been initialized */ |
| if (idx < iface->num_bss) { |
| struct hostapd_data *hapd = iface->bss[idx]; |
| |
| hostapd_bss_deinit(hapd); |
| wpa_printf(MSG_DEBUG, "%s: free hapd %p (%s)", |
| __func__, hapd, hapd->conf->iface); |
| hostapd_config_free_bss(hapd->conf); |
| hapd->conf = NULL; |
| os_free(hapd); |
| |
| iface->num_bss--; |
| |
| for (i = idx; i < iface->num_bss; i++) |
| iface->bss[i] = iface->bss[i + 1]; |
| } else { |
| hostapd_config_free_bss(iface->conf->bss[idx]); |
| iface->conf->bss[idx] = NULL; |
| } |
| |
| iface->conf->num_bss--; |
| for (i = idx; i < iface->conf->num_bss; i++) |
| iface->conf->bss[i] = iface->conf->bss[i + 1]; |
| |
| return 0; |
| } |
| |
| |
| int hostapd_remove_iface(struct hapd_interfaces *interfaces, char *buf) |
| { |
| struct hostapd_iface *hapd_iface; |
| size_t i, j, k = 0; |
| |
| for (i = 0; i < interfaces->count; i++) { |
| hapd_iface = interfaces->iface[i]; |
| if (hapd_iface == NULL) |
| return -1; |
| if (!os_strcmp(hapd_iface->conf->bss[0]->iface, buf)) { |
| wpa_printf(MSG_INFO, "Remove interface '%s'", buf); |
| hapd_iface->driver_ap_teardown = |
| !!(hapd_iface->drv_flags & |
| WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT); |
| |
| hostapd_interface_deinit_free(hapd_iface); |
| k = i; |
| while (k < (interfaces->count - 1)) { |
| interfaces->iface[k] = |
| interfaces->iface[k + 1]; |
| k++; |
| } |
| interfaces->count--; |
| return 0; |
| } |
| |
| for (j = 0; j < hapd_iface->conf->num_bss; j++) { |
| if (!os_strcmp(hapd_iface->conf->bss[j]->iface, buf)) { |
| hapd_iface->driver_ap_teardown = |
| !(hapd_iface->drv_flags & |
| WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT); |
| return hostapd_remove_bss(hapd_iface, j); |
| } |
| } |
| } |
| return -1; |
| } |
| |
| |
| /** |
| * hostapd_new_assoc_sta - Notify that a new station associated with the AP |
| * @hapd: Pointer to BSS data |
| * @sta: Pointer to the associated STA data |
| * @reassoc: 1 to indicate this was a re-association; 0 = first association |
| * |
| * This function will be called whenever a station associates with the AP. It |
| * can be called from ieee802_11.c for drivers that export MLME to hostapd and |
| * from drv_callbacks.c based on driver events for drivers that take care of |
| * management frames (IEEE 802.11 authentication and association) internally. |
| */ |
| void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta, |
| int reassoc) |
| { |
| if (hapd->tkip_countermeasures) { |
| hostapd_drv_sta_deauth(hapd, sta->addr, |
| WLAN_REASON_MICHAEL_MIC_FAILURE); |
| return; |
| } |
| |
| hostapd_prune_associations(hapd, sta->addr); |
| |
| /* IEEE 802.11F (IAPP) */ |
| if (hapd->conf->ieee802_11f) |
| iapp_new_station(hapd->iapp, sta); |
| |
| #ifdef CONFIG_P2P |
| if (sta->p2p_ie == NULL && !sta->no_p2p_set) { |
| sta->no_p2p_set = 1; |
| hapd->num_sta_no_p2p++; |
| if (hapd->num_sta_no_p2p == 1) |
| hostapd_p2p_non_p2p_sta_connected(hapd); |
| } |
| #endif /* CONFIG_P2P */ |
| |
| /* Start accounting here, if IEEE 802.1X and WPA are not used. |
| * IEEE 802.1X/WPA code will start accounting after the station has |
| * been authorized. */ |
| if (!hapd->conf->ieee802_1x && !hapd->conf->wpa && !hapd->conf->osen) { |
| ap_sta_set_authorized(hapd, sta, 1); |
| os_get_reltime(&sta->connected_time); |
| accounting_sta_start(hapd, sta); |
| } |
| |
| /* Start IEEE 802.1X authentication process for new stations */ |
| ieee802_1x_new_station(hapd, sta); |
| if (reassoc) { |
| if (sta->auth_alg != WLAN_AUTH_FT && |
| !(sta->flags & (WLAN_STA_WPS | WLAN_STA_MAYBE_WPS))) |
| wpa_auth_sm_event(sta->wpa_sm, WPA_REAUTH); |
| } else |
| wpa_auth_sta_associated(hapd->wpa_auth, sta->wpa_sm); |
| |
| if (!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_INACTIVITY_TIMER)) { |
| wpa_printf(MSG_DEBUG, "%s: reschedule ap_handle_timer timeout " |
| "for " MACSTR " (%d seconds - ap_max_inactivity)", |
| __func__, MAC2STR(sta->addr), |
| hapd->conf->ap_max_inactivity); |
| eloop_cancel_timeout(ap_handle_timer, hapd, sta); |
| eloop_register_timeout(hapd->conf->ap_max_inactivity, 0, |
| ap_handle_timer, hapd, sta); |
| } |
| } |
| |
| |
| const char * hostapd_state_text(enum hostapd_iface_state s) |
| { |
| switch (s) { |
| case HAPD_IFACE_UNINITIALIZED: |
| return "UNINITIALIZED"; |
| case HAPD_IFACE_DISABLED: |
| return "DISABLED"; |
| case HAPD_IFACE_COUNTRY_UPDATE: |
| return "COUNTRY_UPDATE"; |
| case HAPD_IFACE_ACS: |
| return "ACS"; |
| case HAPD_IFACE_HT_SCAN: |
| return "HT_SCAN"; |
| case HAPD_IFACE_DFS: |
| return "DFS"; |
| case HAPD_IFACE_ENABLED: |
| return "ENABLED"; |
| } |
| |
| return "UNKNOWN"; |
| } |
| |
| |
| void hostapd_set_state(struct hostapd_iface *iface, enum hostapd_iface_state s) |
| { |
| wpa_printf(MSG_INFO, "%s: interface state %s->%s", |
| iface->conf->bss[0]->iface, hostapd_state_text(iface->state), |
| hostapd_state_text(s)); |
| iface->state = s; |
| } |
| |
| |
| #ifdef NEED_AP_MLME |
| |
| static void free_beacon_data(struct beacon_data *beacon) |
| { |
| os_free(beacon->head); |
| beacon->head = NULL; |
| os_free(beacon->tail); |
| beacon->tail = NULL; |
| os_free(beacon->probe_resp); |
| beacon->probe_resp = NULL; |
| os_free(beacon->beacon_ies); |
| beacon->beacon_ies = NULL; |
| os_free(beacon->proberesp_ies); |
| beacon->proberesp_ies = NULL; |
| os_free(beacon->assocresp_ies); |
| beacon->assocresp_ies = NULL; |
| } |
| |
| |
| static int hostapd_build_beacon_data(struct hostapd_data *hapd, |
| struct beacon_data *beacon) |
| { |
| struct wpabuf *beacon_extra, *proberesp_extra, *assocresp_extra; |
| struct wpa_driver_ap_params params; |
| int ret; |
| |
| os_memset(beacon, 0, sizeof(*beacon)); |
| ret = ieee802_11_build_ap_params(hapd, ¶ms); |
| if (ret < 0) |
| return ret; |
| |
| ret = hostapd_build_ap_extra_ies(hapd, &beacon_extra, |
| &proberesp_extra, |
| &assocresp_extra); |
| if (ret) |
| goto free_ap_params; |
| |
| ret = -1; |
| beacon->head = os_malloc(params.head_len); |
| if (!beacon->head) |
| goto free_ap_extra_ies; |
| |
| os_memcpy(beacon->head, params.head, params.head_len); |
| beacon->head_len = params.head_len; |
| |
| beacon->tail = os_malloc(params.tail_len); |
| if (!beacon->tail) |
| goto free_beacon; |
| |
| os_memcpy(beacon->tail, params.tail, params.tail_len); |
| beacon->tail_len = params.tail_len; |
| |
| if (params.proberesp != NULL) { |
| beacon->probe_resp = os_malloc(params.proberesp_len); |
| if (!beacon->probe_resp) |
| goto free_beacon; |
| |
| os_memcpy(beacon->probe_resp, params.proberesp, |
| params.proberesp_len); |
| beacon->probe_resp_len = params.proberesp_len; |
| } |
| |
| /* copy the extra ies */ |
| if (beacon_extra) { |
| beacon->beacon_ies = os_malloc(wpabuf_len(beacon_extra)); |
| if (!beacon->beacon_ies) |
| goto free_beacon; |
| |
| os_memcpy(beacon->beacon_ies, |
| beacon_extra->buf, wpabuf_len(beacon_extra)); |
| beacon->beacon_ies_len = wpabuf_len(beacon_extra); |
| } |
| |
| if (proberesp_extra) { |
| beacon->proberesp_ies = |
| os_malloc(wpabuf_len(proberesp_extra)); |
| if (!beacon->proberesp_ies) |
| goto free_beacon; |
| |
| os_memcpy(beacon->proberesp_ies, proberesp_extra->buf, |
| wpabuf_len(proberesp_extra)); |
| beacon->proberesp_ies_len = wpabuf_len(proberesp_extra); |
| } |
| |
| if (assocresp_extra) { |
| beacon->assocresp_ies = |
| os_malloc(wpabuf_len(assocresp_extra)); |
| if (!beacon->assocresp_ies) |
| goto free_beacon; |
| |
| os_memcpy(beacon->assocresp_ies, assocresp_extra->buf, |
| wpabuf_len(assocresp_extra)); |
| beacon->assocresp_ies_len = wpabuf_len(assocresp_extra); |
| } |
| |
| ret = 0; |
| free_beacon: |
| /* if the function fails, the caller should not free beacon data */ |
| if (ret) |
| free_beacon_data(beacon); |
| |
| free_ap_extra_ies: |
| hostapd_free_ap_extra_ies(hapd, beacon_extra, proberesp_extra, |
| assocresp_extra); |
| free_ap_params: |
| ieee802_11_free_ap_params(¶ms); |
| return ret; |
| } |
| |
| |
| /* |
| * TODO: This flow currently supports only changing frequency within the |
| * same hw_mode. Any other changes to MAC parameters or provided settings (even |
| * width) are not supported. |
| */ |
| static int hostapd_change_config_freq(struct hostapd_data *hapd, |
| struct hostapd_config *conf, |
| struct hostapd_freq_params *params, |
| struct hostapd_freq_params *old_params) |
| { |
| int channel; |
| |
| if (!params->channel) { |
| /* check if the new channel is supported by hw */ |
| params->channel = hostapd_hw_get_channel(hapd, params->freq); |
| } |
| |
| channel = params->channel; |
| if (!channel) |
| return -1; |
| |
| /* if a pointer to old_params is provided we save previous state */ |
| if (old_params) { |
| old_params->channel = conf->channel; |
| old_params->ht_enabled = conf->ieee80211n; |
| old_params->sec_channel_offset = conf->secondary_channel; |
| } |
| |
| conf->channel = channel; |
| conf->ieee80211n = params->ht_enabled; |
| conf->secondary_channel = params->sec_channel_offset; |
| |
| /* TODO: maybe call here hostapd_config_check here? */ |
| |
| return 0; |
| } |
| |
| |
| static int hostapd_fill_csa_settings(struct hostapd_data *hapd, |
| struct csa_settings *settings) |
| { |
| struct hostapd_iface *iface = hapd->iface; |
| struct hostapd_freq_params old_freq; |
| int ret; |
| |
| os_memset(&old_freq, 0, sizeof(old_freq)); |
| if (!iface || !iface->freq || hapd->csa_in_progress) |
| return -1; |
| |
| ret = hostapd_change_config_freq(iface->bss[0], iface->conf, |
| &settings->freq_params, |
| &old_freq); |
| if (ret) |
| return ret; |
| |
| ret = hostapd_build_beacon_data(hapd, &settings->beacon_after); |
| |
| /* change back the configuration */ |
| hostapd_change_config_freq(iface->bss[0], iface->conf, |
| &old_freq, NULL); |
| |
| if (ret) |
| return ret; |
| |
| /* set channel switch parameters for csa ie */ |
| hapd->cs_freq_params = settings->freq_params; |
| hapd->cs_count = settings->cs_count; |
| hapd->cs_block_tx = settings->block_tx; |
| |
| ret = hostapd_build_beacon_data(hapd, &settings->beacon_csa); |
| if (ret) { |
| free_beacon_data(&settings->beacon_after); |
| return ret; |
| } |
| |
| settings->counter_offset_beacon = hapd->cs_c_off_beacon; |
| settings->counter_offset_presp = hapd->cs_c_off_proberesp; |
| |
| return 0; |
| } |
| |
| |
| void hostapd_cleanup_cs_params(struct hostapd_data *hapd) |
| { |
| os_memset(&hapd->cs_freq_params, 0, sizeof(hapd->cs_freq_params)); |
| hapd->cs_count = 0; |
| hapd->cs_block_tx = 0; |
| hapd->cs_c_off_beacon = 0; |
| hapd->cs_c_off_proberesp = 0; |
| hapd->csa_in_progress = 0; |
| } |
| |
| |
| int hostapd_switch_channel(struct hostapd_data *hapd, |
| struct csa_settings *settings) |
| { |
| int ret; |
| |
| if (!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_AP_CSA)) { |
| wpa_printf(MSG_INFO, "CSA is not supported"); |
| return -1; |
| } |
| |
| ret = hostapd_fill_csa_settings(hapd, settings); |
| if (ret) |
| return ret; |
| |
| ret = hostapd_drv_switch_channel(hapd, settings); |
| free_beacon_data(&settings->beacon_csa); |
| free_beacon_data(&settings->beacon_after); |
| |
| if (ret) { |
| /* if we failed, clean cs parameters */ |
| hostapd_cleanup_cs_params(hapd); |
| return ret; |
| } |
| |
| hapd->csa_in_progress = 1; |
| return 0; |
| } |
| |
| |
| void |
| hostapd_switch_channel_fallback(struct hostapd_iface *iface, |
| const struct hostapd_freq_params *freq_params) |
| { |
| int vht_seg0_idx = 0, vht_seg1_idx = 0, vht_bw = VHT_CHANWIDTH_USE_HT; |
| unsigned int i; |
| |
| wpa_printf(MSG_DEBUG, "Restarting all CSA-related BSSes"); |
| |
| if (freq_params->center_freq1) |
| vht_seg0_idx = 36 + (freq_params->center_freq1 - 5180) / 5; |
| if (freq_params->center_freq2) |
| vht_seg1_idx = 36 + (freq_params->center_freq2 - 5180) / 5; |
| |
| switch (freq_params->bandwidth) { |
| case 0: |
| case 20: |
| case 40: |
| vht_bw = VHT_CHANWIDTH_USE_HT; |
| break; |
| case 80: |
| if (freq_params->center_freq2) |
| vht_bw = VHT_CHANWIDTH_80P80MHZ; |
| else |
| vht_bw = VHT_CHANWIDTH_80MHZ; |
| break; |
| case 160: |
| vht_bw = VHT_CHANWIDTH_160MHZ; |
| break; |
| default: |
| wpa_printf(MSG_WARNING, "Unknown CSA bandwidth: %d", |
| freq_params->bandwidth); |
| break; |
| } |
| |
| iface->freq = freq_params->freq; |
| iface->conf->channel = freq_params->channel; |
| iface->conf->secondary_channel = freq_params->sec_channel_offset; |
| iface->conf->vht_oper_centr_freq_seg0_idx = vht_seg0_idx; |
| iface->conf->vht_oper_centr_freq_seg1_idx = vht_seg1_idx; |
| iface->conf->vht_oper_chwidth = vht_bw; |
| iface->conf->ieee80211n = freq_params->ht_enabled; |
| iface->conf->ieee80211ac = freq_params->vht_enabled; |
| |
| /* |
| * cs_params must not be cleared earlier because the freq_params |
| * argument may actually point to one of these. |
| */ |
| for (i = 0; i < iface->num_bss; i++) |
| hostapd_cleanup_cs_params(iface->bss[i]); |
| |
| hostapd_disable_iface(iface); |
| hostapd_enable_iface(iface); |
| } |
| |
| #endif /* NEED_AP_MLME */ |