blob: a440b69e565c2b170b536fbb44b9fceb01430c6e [file] [log] [blame]
/*
* wpa_supplicant/hostapd control interface library
* Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#ifndef WPA_CTRL_H
#define WPA_CTRL_H
#ifdef __cplusplus
extern "C" {
#endif
/* wpa_supplicant control interface - fixed message prefixes */
/** Interactive request for identity/password/pin */
#define WPA_CTRL_REQ "CTRL-REQ-"
/** Response to identity/password/pin request */
#define WPA_CTRL_RSP "CTRL-RSP-"
/* Event messages with fixed prefix */
/** Authentication completed successfully and data connection enabled */
#define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
/** Disconnected, data connection is not available */
#define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
/** Association rejected during connection attempt */
#define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
/** wpa_supplicant is exiting */
#define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
/** Password change was completed successfully */
#define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
/** EAP-Request/Notification received */
#define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
/** EAP authentication started (EAP-Request/Identity received) */
#define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
/** EAP method proposed by the server */
#define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
/** EAP method selected */
#define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
/** EAP peer certificate from TLS */
#define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
/** EAP TLS certificate chain validation error */
#define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
/** EAP authentication completed successfully */
#define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
/** EAP authentication failed (EAP-Failure received) */
#define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
/** New scan results available */
#define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
/** wpa_supplicant state change */
#define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
/** A new BSS entry was added (followed by BSS entry id and BSSID) */
#define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
/** A BSS entry was removed (followed by BSS entry id and BSSID) */
#define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
#ifdef ANDROID_P2P
/** Notify the Userspace about the freq conflict */
#define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
#endif
/** WPS overlap detected in PBC mode */
#define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
/** Available WPS AP with active PBC found in scan results */
#define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
/** Available WPS AP with our address as authorized in scan results */
#define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
/** Available WPS AP with recently selected PIN registrar found in scan results
*/
#define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
/** Available WPS AP found in scan results */
#define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
/** A new credential received */
#define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
/** M2D received */
#define WPS_EVENT_M2D "WPS-M2D "
/** WPS registration failed after M2/M2D */
#define WPS_EVENT_FAIL "WPS-FAIL "
/** WPS registration completed successfully */
#define WPS_EVENT_SUCCESS "WPS-SUCCESS "
/** WPS enrollment attempt timed out and was terminated */
#define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
#define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
#define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
/* WPS ER events */
#define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
#define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
#define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
#define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
#define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
#define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
/** P2P device found */
#define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
/** P2P device lost */
#define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
/** A P2P device requested GO negotiation, but we were not ready to start the
* negotiation */
#define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
#define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
#define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
#define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
#define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
#define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
#define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
#define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
#define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
/* parameters: <peer address> <PIN> */
#define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
/* parameters: <peer address> */
#define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
/* parameters: <peer address> */
#define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
/* parameters: <peer address> */
#define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
/* parameters: <peer address> <status> */
#define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
/* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
#define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
/* parameters: <src addr> <update indicator> <TLVs> */
#define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
#define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
#define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
#define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
#define INTERWORKING_AP "INTERWORKING-AP "
#define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
/* hostapd control interface - fixed message prefixes */
#define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
#define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
#define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
#define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
#define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
#define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
#define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
#define AP_STA_CONNECTED "AP-STA-CONNECTED "
#define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
/* BSS command information masks */
#define WPA_BSS_MASK_ALL 0xFFFFFFFF
#define WPA_BSS_MASK_ID BIT(0)
#define WPA_BSS_MASK_BSSID BIT(1)
#define WPA_BSS_MASK_FREQ BIT(2)
#define WPA_BSS_MASK_BEACON_INT BIT(3)
#define WPA_BSS_MASK_CAPABILITIES BIT(4)
#define WPA_BSS_MASK_QUAL BIT(5)
#define WPA_BSS_MASK_NOISE BIT(6)
#define WPA_BSS_MASK_LEVEL BIT(7)
#define WPA_BSS_MASK_TSF BIT(8)
#define WPA_BSS_MASK_AGE BIT(9)
#define WPA_BSS_MASK_IE BIT(10)
#define WPA_BSS_MASK_FLAGS BIT(11)
#define WPA_BSS_MASK_SSID BIT(12)
#define WPA_BSS_MASK_WPS_SCAN BIT(13)
#define WPA_BSS_MASK_P2P_SCAN BIT(14)
#define WPA_BSS_MASK_INTERNETW BIT(15)
/* wpa_supplicant/hostapd control interface access */
/**
* wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
* @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
* Returns: Pointer to abstract control interface data or %NULL on failure
*
* This function is used to open a control interface to wpa_supplicant/hostapd.
* ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
* is configured in wpa_supplicant/hostapd and other programs using the control
* interface need to use matching path configuration.
*/
struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
/**
* wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
* @ctrl: Control interface data from wpa_ctrl_open()
*
* This function is used to close a control interface.
*/
void wpa_ctrl_close(struct wpa_ctrl *ctrl);
/**
* wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
* @ctrl: Control interface data from wpa_ctrl_open()
* @cmd: Command; usually, ASCII text, e.g., "PING"
* @cmd_len: Length of the cmd in bytes
* @reply: Buffer for the response
* @reply_len: Reply buffer length
* @msg_cb: Callback function for unsolicited messages or %NULL if not used
* Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
*
* This function is used to send commands to wpa_supplicant/hostapd. Received
* response will be written to reply and reply_len is set to the actual length
* of the reply. This function will block for up to two seconds while waiting
* for the reply. If unsolicited messages are received, the blocking time may
* be longer.
*
* msg_cb can be used to register a callback function that will be called for
* unsolicited messages received while waiting for the command response. These
* messages may be received if wpa_ctrl_request() is called at the same time as
* wpa_supplicant/hostapd is sending such a message. This can happen only if
* the program has used wpa_ctrl_attach() to register itself as a monitor for
* event messages. Alternatively to msg_cb, programs can register two control
* interface connections and use one of them for commands and the other one for
* receiving event messages, in other words, call wpa_ctrl_attach() only for
* the control interface connection that will be used for event messages.
*/
int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
char *reply, size_t *reply_len,
void (*msg_cb)(char *msg, size_t len));
/**
* wpa_ctrl_attach - Register as an event monitor for the control interface
* @ctrl: Control interface data from wpa_ctrl_open()
* Returns: 0 on success, -1 on failure, -2 on timeout
*
* This function registers the control interface connection as a monitor for
* wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
* control interface connection starts receiving event messages that can be
* read with wpa_ctrl_recv().
*/
int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
/**
* wpa_ctrl_detach - Unregister event monitor from the control interface
* @ctrl: Control interface data from wpa_ctrl_open()
* Returns: 0 on success, -1 on failure, -2 on timeout
*
* This function unregisters the control interface connection as a monitor for
* wpa_supplicant/hostapd events, i.e., cancels the registration done with
* wpa_ctrl_attach().
*/
int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
/**
* wpa_ctrl_recv - Receive a pending control interface message
* @ctrl: Control interface data from wpa_ctrl_open()
* @reply: Buffer for the message data
* @reply_len: Length of the reply buffer
* Returns: 0 on success, -1 on failure
*
* This function will receive a pending control interface message. This
* function will block if no messages are available. The received response will
* be written to reply and reply_len is set to the actual length of the reply.
* wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
* must have been used to register the control interface as an event monitor.
*/
int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
/**
* wpa_ctrl_pending - Check whether there are pending event messages
* @ctrl: Control interface data from wpa_ctrl_open()
* Returns: 1 if there are pending messages, 0 if no, or -1 on error
*
* This function will check whether there are any pending control interface
* message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
* only used for event messages, i.e., wpa_ctrl_attach() must have been used to
* register the control interface as an event monitor.
*/
int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
/**
* wpa_ctrl_get_fd - Get file descriptor used by the control interface
* @ctrl: Control interface data from wpa_ctrl_open()
* Returns: File descriptor used for the connection
*
* This function can be used to get the file descriptor that is used for the
* control interface connection. The returned value can be used, e.g., with
* select() while waiting for multiple events.
*
* The returned file descriptor must not be used directly for sending or
* receiving packets; instead, the library functions wpa_ctrl_request() and
* wpa_ctrl_recv() must be used for this.
*/
int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
#ifdef ANDROID
/**
* wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
* may be left over from clients that were previously connected to
* wpa_supplicant. This keeps these files from being orphaned in the
* event of crashes that prevented them from being removed as part
* of the normal orderly shutdown.
*/
void wpa_ctrl_cleanup(void);
#endif /* ANDROID */
#ifdef CONFIG_CTRL_IFACE_UDP
#define WPA_CTRL_IFACE_PORT 9877
#define WPA_GLOBAL_CTRL_IFACE_PORT 9878
#endif /* CONFIG_CTRL_IFACE_UDP */
#ifdef __cplusplus
}
#endif
#endif /* WPA_CTRL_H */