src/qcomm-hidl/ant_rx_chardev.c - LeafOS-Project/android_external_ant-wireless_hidl - Gitiles

 /*
  * ANT Stack
  *
  * Copyright 2011 Dynastream Innovations
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 /******************************************************************************\
 *
 *   FILE NAME:      ant_rx_chardev.c
 *
 *   BRIEF:
 *      This file implements the receive thread function which will loop reading
 *      ANT messages until told to exit.
 *
 *
 \******************************************************************************/

 #include <errno.h>
 #include <poll.h>
 #include <pthread.h>
 #include <stdint.h> /* for uint64_t */
 #include <string.h>

 #include "ant_types.h"
 #include "antradio_power.h"
 #include "ant_rx_chardev.h"
 #include "ant_hci_defines.h"
 #include "ant_log.h"
 #include "ant_native.h"  // ANT_HCI_MAX_MSG_SIZE, ANT_MSG_ID_OFFSET, ANT_MSG_DATA_OFFSET,
                          // ant_radio_enabled_status()

 #include "AntHidlClient.h"
 extern ANTStatus ant_tx_message_flowcontrol_none(ant_channel_type eTxPath, ANT_U8 ucMessageLength, ANT_U8 *pucTxMessage);

 #undef LOG_TAG
 #define LOG_TAG "antradio_rx"

 #define ANT_POLL_TIMEOUT         ((int)30000)
 #define KEEPALIVE_TIMEOUT        ((int)5000)

 ANT_U8 aucRxBuffer[NUM_ANT_CHANNELS][ANT_HCI_MAX_MSG_SIZE];

 #ifdef ANT_DEVICE_NAME // Single transport path
    int iRxBufferLength[NUM_ANT_CHANNELS] = {0};
 #else
    int iRxBufferLength[NUM_ANT_CHANNELS] = {0, 0};
 #endif //

 // Plus one is for the eventfd shutdown signal.
 #define NUM_POLL_FDS (NUM_ANT_CHANNELS + 1)
 #define EVENTFD_IDX NUM_ANT_CHANNELS

 static ANT_U8 KEEPALIVE_MESG[] = {0x01, 0x00, 0x00};
 static ANT_U8 KEEPALIVE_RESP[] = {0x03, 0x40, 0x00, 0x00, 0x28};

 void doReset(ant_rx_thread_info_t *stRxThreadInfo);
 int readChannelMsg(ant_channel_type eChannel, ant_channel_info_t *pstChnlInfo);


 /*
  * This thread is run occasionally as a detached thread in order to send a keepalive message to the
  * chip.
  */
 void *fnKeepAliveThread(void *unused)
 {
    ANT_DEBUG_V("Sending dummy keepalive message.");
    ant_tx_message(sizeof(KEEPALIVE_MESG)/sizeof(ANT_U8), KEEPALIVE_MESG);
    return NULL;
 }

 /*
  * This thread waits for ANT messages from a VFS file.
  */
 void *fnRxThread(void *ant_rx_thread_info)
 {
    int iMutexLockResult;
    int iPollRet;
    ant_rx_thread_info_t *stRxThreadInfo;
    struct pollfd astPollFd[NUM_POLL_FDS];
    ANT_FUNC_START();

    stRxThreadInfo = (ant_rx_thread_info_t *)ant_rx_thread_info;
    // Fill out poll request for the shutdown signaller.
    astPollFd[EVENTFD_IDX].fd = stRxThreadInfo->iRxShutdownEventFd;
    astPollFd[EVENTFD_IDX].events = POLL_IN;

    // Reset the waiting for response, since we don't want a stale value if we were reset.
    stRxThreadInfo->bWaitingForKeepaliveResponse = ANT_FALSE;

    /* continue running as long as not terminated */
    while (stRxThreadInfo->ucRunThread) {
       iPollRet = ant_rx_check();
       if(iPollRet == 0)
       {
          readChannelMsg(0, &stRxThreadInfo->astChannels[0]);
       }
    }

    /* disable ANT radio if not already disabling */
    // Try to get stEnabledStatusLock.
    // if you get it then no one is enabling or disabling
    // if you can't get it assume something made you exit
    ANT_DEBUG_V("try getting stEnabledStatusLock in %s", __FUNCTION__);
    iMutexLockResult = pthread_mutex_trylock(stRxThreadInfo->pstEnabledStatusLock);
    if (!iMutexLockResult) {
       ANT_DEBUG_V("got stEnabledStatusLock in %s", __FUNCTION__);
       ANT_WARN("rx thread has unexpectedly crashed, cleaning up");

       // spoof our handle as closed so we don't try to join ourselves in disable
       stRxThreadInfo->stRxThread = 0;

       if (g_fnStateCallback) {
          g_fnStateCallback(RADIO_STATUS_DISABLING);
       }

       ant_disable();

       if (g_fnStateCallback) {
          g_fnStateCallback(ant_radio_enabled_status());
       }

       ANT_DEBUG_V("releasing stEnabledStatusLock in %s", __FUNCTION__);
       pthread_mutex_unlock(stRxThreadInfo->pstEnabledStatusLock);
       ANT_DEBUG_V("released stEnabledStatusLock in %s", __FUNCTION__);
    } else if (iMutexLockResult != EBUSY) {
       ANT_ERROR("rx thread closing code, trylock on state lock failed: %s",
             strerror(iMutexLockResult));
    } else {
       ANT_DEBUG_V("stEnabledStatusLock busy");
    }

    out:
    ANT_FUNC_END();
 #ifdef ANDROID
    return NULL;
 #endif
 }

 void doReset(ant_rx_thread_info_t *stRxThreadInfo)
 {
    int iMutexLockResult;

    ANT_FUNC_START();
    /* Chip was reset or other error, only way to recover is to
     * close and open ANT chardev */
    stRxThreadInfo->ucChipResetting = 1;

    if (g_fnStateCallback) {
       g_fnStateCallback(RADIO_STATUS_RESETTING);
    }

    stRxThreadInfo->ucRunThread = 0;

    ANT_DEBUG_V("getting stEnabledStatusLock in %s", __FUNCTION__);
    iMutexLockResult = pthread_mutex_lock(stRxThreadInfo->pstEnabledStatusLock);
    if (iMutexLockResult < 0) {
       ANT_ERROR("chip was reset, getting state mutex failed: %s",
             strerror(iMutexLockResult));
       stRxThreadInfo->stRxThread = 0;
       stRxThreadInfo->ucChipResetting = 0;
    } else {
       ANT_DEBUG_V("got stEnabledStatusLock in %s", __FUNCTION__);

       stRxThreadInfo->stRxThread = 0; /* spoof our handle as closed so we don't
                                        * try to join ourselves in disable */

       ant_disable();

       int enableResult = ant_enable();

       stRxThreadInfo->ucChipResetting = 0;
       if (enableResult) { /* failed */
          if (g_fnStateCallback) {
             g_fnStateCallback(RADIO_STATUS_DISABLED);
          }
       } else { /* success */
          if (g_fnStateCallback) {
             g_fnStateCallback(RADIO_STATUS_RESET);
          }
       }

       ANT_DEBUG_V("releasing stEnabledStatusLock in %s", __FUNCTION__);
       pthread_mutex_unlock(stRxThreadInfo->pstEnabledStatusLock);
       ANT_DEBUG_V("released stEnabledStatusLock in %s", __FUNCTION__);
    }

    ANT_FUNC_END();
 }

 ////////////////////////////////////////////////////////////////////
 //  setFlowControl
 //
 //  Sets the flow control "flag" to the value provided and signals the transmit
 //  thread to check the value.
 //
 //  Parameters:
 //      pstChnlInfo   the details of the channel being updated
 //      ucFlowSetting the value to use
 //
 //  Returns:
 //      Success:
 //          0
 //      Failure:
 //          -1
 ////////////////////////////////////////////////////////////////////
 int setFlowControl(ant_channel_info_t *pstChnlInfo, ANT_U8 ucFlowSetting)
 {
    int iRet = -1;
    int iMutexResult;
    ANT_FUNC_START();

    ANT_DEBUG_V("getting stFlowControlLock in %s", __FUNCTION__);
    iMutexResult = pthread_mutex_lock(pstChnlInfo->pstFlowControlLock);
    if (iMutexResult) {
       ANT_ERROR("failed to lock flow control mutex during response: %s", strerror(iMutexResult));
    } else {
       ANT_DEBUG_V("got stFlowControlLock in %s", __FUNCTION__);

       pstChnlInfo->ucFlowControlResp = ucFlowSetting;

       ANT_DEBUG_V("releasing stFlowControlLock in %s", __FUNCTION__);
       pthread_mutex_unlock(pstChnlInfo->pstFlowControlLock);
       ANT_DEBUG_V("released stFlowControlLock in %s", __FUNCTION__);

       pthread_cond_signal(pstChnlInfo->pstFlowControlCond);

       iRet = 0;
    }

    ANT_FUNC_END();
    return iRet;
 }

 int readChannelMsg(ant_channel_type eChannel, ant_channel_info_t *pstChnlInfo)
 {
    int iRet = -1;
    int iRxLenRead = 0;
    int iCurrentHciPacketOffset;
    int iHciDataSize;
    ANT_FUNC_START();

    // Keep trying to read while there is an error, and that error is EAGAIN
    {
       iRxLenRead += iRxBufferLength[eChannel];   // add existing data on
       ANT_DEBUG_D("iRxLenRead %d",iRxLenRead);
       ANT_SERIAL(aucRxBuffer[eChannel], iRxLenRead, 'R');

       // if we didn't get a full packet, then just exit
       if (iRxLenRead < (aucRxBuffer[eChannel][ANT_HCI_SIZE_OFFSET] + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE)) {
          iRxBufferLength[eChannel] = iRxLenRead;
          iRet = 0;
          goto out;
       }

       iRxBufferLength[eChannel] = 0;    // reset buffer length here since we should have a full packet

 #if ANT_HCI_OPCODE_SIZE == 1  // Check the different message types by opcode
       ANT_U8 opcode = aucRxBuffer[eChannel][ANT_HCI_OPCODE_OFFSET];

       if(ANT_HCI_OPCODE_COMMAND_COMPLETE == opcode) {
          // Command Complete, so signal a FLOW_GO
          if(setFlowControl(pstChnlInfo, ANT_FLOW_GO)) {
             goto out;
          }
       } else if(ANT_HCI_OPCODE_FLOW_ON == opcode) {
          // FLow On, so resend the last Tx
 #ifdef ANT_FLOW_RESEND
          // Check if there is a message to resend
          if(pstChnlInfo->ucResendMessageLength > 0) {
             ant_tx_message_flowcontrol_none(eChannel, pstChnlInfo->ucResendMessageLength, pstChnlInfo->pucResendMessage);
          } else {
             ANT_DEBUG_D("Resend requested by chip, but tx request cancelled");
          }
 #endif // ANT_FLOW_RESEND
       } else if(ANT_HCI_OPCODE_ANT_EVENT == opcode)
          // ANT Event, send ANT packet to Rx Callback
 #endif // ANT_HCI_OPCODE_SIZE == 1
       {
       // Received an ANT packet
          iCurrentHciPacketOffset = 0;

          while(iCurrentHciPacketOffset < iRxLenRead) {
             ANT_DEBUG_D("iRxLenRead = %d",iRxLenRead);

             // TODO Allow HCI Packet Size value to be larger than 1 byte
             // This currently works as no size value is greater than 255, and little endian
             iHciDataSize = aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_SIZE_OFFSET];

             if ((iHciDataSize + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE + iCurrentHciPacketOffset) >
                   iRxLenRead) {
                // we don't have a whole packet
                iRxBufferLength[eChannel] = iRxLenRead - iCurrentHciPacketOffset;
                memcpy(aucRxBuffer[eChannel], &aucRxBuffer[eChannel][iCurrentHciPacketOffset], iRxBufferLength[eChannel]);
                // the increment at the end should push us out of the while loop
             } else
 #ifdef ANT_MESG_FLOW_CONTROL
             if (aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET + ANT_MSG_ID_OFFSET] ==
                   ANT_MESG_FLOW_CONTROL) {
                // This is a flow control packet, not a standard ANT message
                if(setFlowControl(pstChnlInfo, \
                      aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET + ANT_MSG_DATA_OFFSET])) {
                   goto out;
                }
             } else
 #endif // ANT_MESG_FLOW_CONTROL
             {
                ANT_U8 *msg = aucRxBuffer[eChannel] + iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET;
                ANT_BOOL bIsKeepAliveResponse = memcmp(msg, KEEPALIVE_RESP, sizeof(KEEPALIVE_RESP)/sizeof(ANT_U8)) == 0;
                if (bIsKeepAliveResponse) {
                   ANT_DEBUG_V("Filtered out keepalive response.");
                } else if (pstChnlInfo->fnRxCallback != NULL) {
                   ANT_DEBUG_V("call rx callback hci data size = %d",iHciDataSize);

                   // Loop through read data until all HCI packets are written to callback
                      pstChnlInfo->fnRxCallback(iHciDataSize, \
                            msg);
                } else {
                   ANT_WARN("%s rx callback is null", pstChnlInfo->pcDevicePath);
                }
             }

             iCurrentHciPacketOffset = iCurrentHciPacketOffset + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE + iHciDataSize;
          }
       }

       iRet = 0;
    }

 out:
    // Need to indicate that we are done handling the rx buffer and it can be
    // overwritten again.
    ant_rx_clear();
    ANT_FUNC_END();
    return iRet;
 }
	/*
	* ANT Stack
	*
	* Copyright 2011 Dynastream Innovations
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	/******************************************************************************\
	*
	* FILE NAME: ant_rx_chardev.c
	*
	* BRIEF:
	* This file implements the receive thread function which will loop reading
	* ANT messages until told to exit.
	*
	*
	\******************************************************************************/

	#include <errno.h>
	#include <poll.h>
	#include <pthread.h>
	#include <stdint.h> /* for uint64_t */
	#include <string.h>

	#include "ant_types.h"
	#include "antradio_power.h"
	#include "ant_rx_chardev.h"
	#include "ant_hci_defines.h"
	#include "ant_log.h"
	#include "ant_native.h" // ANT_HCI_MAX_MSG_SIZE, ANT_MSG_ID_OFFSET, ANT_MSG_DATA_OFFSET,
	// ant_radio_enabled_status()

	#include "AntHidlClient.h"
	extern ANTStatus ant_tx_message_flowcontrol_none(ant_channel_type eTxPath, ANT_U8 ucMessageLength, ANT_U8 *pucTxMessage);

	#undef LOG_TAG
	#define LOG_TAG "antradio_rx"

	#define ANT_POLL_TIMEOUT ((int)30000)
	#define KEEPALIVE_TIMEOUT ((int)5000)

	ANT_U8 aucRxBuffer[NUM_ANT_CHANNELS][ANT_HCI_MAX_MSG_SIZE];

	#ifdef ANT_DEVICE_NAME // Single transport path
	int iRxBufferLength[NUM_ANT_CHANNELS] = {0};
	#else
	int iRxBufferLength[NUM_ANT_CHANNELS] = {0, 0};
	#endif //

	// Plus one is for the eventfd shutdown signal.
	#define NUM_POLL_FDS (NUM_ANT_CHANNELS + 1)
	#define EVENTFD_IDX NUM_ANT_CHANNELS

	static ANT_U8 KEEPALIVE_MESG[] = {0x01, 0x00, 0x00};
	static ANT_U8 KEEPALIVE_RESP[] = {0x03, 0x40, 0x00, 0x00, 0x28};

	void doReset(ant_rx_thread_info_t *stRxThreadInfo);
	int readChannelMsg(ant_channel_type eChannel, ant_channel_info_t *pstChnlInfo);


	/*
	* This thread is run occasionally as a detached thread in order to send a keepalive message to the
	* chip.
	*/
	void fnKeepAliveThread(void unused)
	{
	ANT_DEBUG_V("Sending dummy keepalive message.");
	ant_tx_message(sizeof(KEEPALIVE_MESG)/sizeof(ANT_U8), KEEPALIVE_MESG);
	return NULL;
	}

	/*
	* This thread waits for ANT messages from a VFS file.
	*/
	void fnRxThread(void ant_rx_thread_info)
	{
	int iMutexLockResult;
	int iPollRet;
	ant_rx_thread_info_t *stRxThreadInfo;
	struct pollfd astPollFd[NUM_POLL_FDS];
	ANT_FUNC_START();

	stRxThreadInfo = (ant_rx_thread_info_t *)ant_rx_thread_info;
	// Fill out poll request for the shutdown signaller.
	astPollFd[EVENTFD_IDX].fd = stRxThreadInfo->iRxShutdownEventFd;
	astPollFd[EVENTFD_IDX].events = POLL_IN;

	// Reset the waiting for response, since we don't want a stale value if we were reset.
	stRxThreadInfo->bWaitingForKeepaliveResponse = ANT_FALSE;

	/* continue running as long as not terminated */
	while (stRxThreadInfo->ucRunThread) {
	iPollRet = ant_rx_check();
	if(iPollRet == 0)
	{
	readChannelMsg(0, &stRxThreadInfo->astChannels[0]);
	}
	}

	/* disable ANT radio if not already disabling */
	// Try to get stEnabledStatusLock.
	// if you get it then no one is enabling or disabling
	// if you can't get it assume something made you exit
	ANT_DEBUG_V("try getting stEnabledStatusLock in %s", __FUNCTION__);
	iMutexLockResult = pthread_mutex_trylock(stRxThreadInfo->pstEnabledStatusLock);
	if (!iMutexLockResult) {
	ANT_DEBUG_V("got stEnabledStatusLock in %s", __FUNCTION__);
	ANT_WARN("rx thread has unexpectedly crashed, cleaning up");

	// spoof our handle as closed so we don't try to join ourselves in disable
	stRxThreadInfo->stRxThread = 0;

	if (g_fnStateCallback) {
	g_fnStateCallback(RADIO_STATUS_DISABLING);
	}

	ant_disable();

	if (g_fnStateCallback) {
	g_fnStateCallback(ant_radio_enabled_status());
	}

	ANT_DEBUG_V("releasing stEnabledStatusLock in %s", __FUNCTION__);
	pthread_mutex_unlock(stRxThreadInfo->pstEnabledStatusLock);
	ANT_DEBUG_V("released stEnabledStatusLock in %s", __FUNCTION__);
	} else if (iMutexLockResult != EBUSY) {
	ANT_ERROR("rx thread closing code, trylock on state lock failed: %s",
	strerror(iMutexLockResult));
	} else {
	ANT_DEBUG_V("stEnabledStatusLock busy");
	}

	out:
	ANT_FUNC_END();
	#ifdef ANDROID
	return NULL;
	#endif
	}

	void doReset(ant_rx_thread_info_t *stRxThreadInfo)
	{
	int iMutexLockResult;

	ANT_FUNC_START();
	/* Chip was reset or other error, only way to recover is to
	* close and open ANT chardev */
	stRxThreadInfo->ucChipResetting = 1;

	if (g_fnStateCallback) {
	g_fnStateCallback(RADIO_STATUS_RESETTING);
	}

	stRxThreadInfo->ucRunThread = 0;

	ANT_DEBUG_V("getting stEnabledStatusLock in %s", __FUNCTION__);
	iMutexLockResult = pthread_mutex_lock(stRxThreadInfo->pstEnabledStatusLock);
	if (iMutexLockResult < 0) {
	ANT_ERROR("chip was reset, getting state mutex failed: %s",
	strerror(iMutexLockResult));
	stRxThreadInfo->stRxThread = 0;
	stRxThreadInfo->ucChipResetting = 0;
	} else {
	ANT_DEBUG_V("got stEnabledStatusLock in %s", __FUNCTION__);

	stRxThreadInfo->stRxThread = 0; /* spoof our handle as closed so we don't
	* try to join ourselves in disable */

	ant_disable();

	int enableResult = ant_enable();

	stRxThreadInfo->ucChipResetting = 0;
	if (enableResult) { /* failed */
	if (g_fnStateCallback) {
	g_fnStateCallback(RADIO_STATUS_DISABLED);
	}
	} else { /* success */
	if (g_fnStateCallback) {
	g_fnStateCallback(RADIO_STATUS_RESET);
	}
	}

	ANT_DEBUG_V("releasing stEnabledStatusLock in %s", __FUNCTION__);
	pthread_mutex_unlock(stRxThreadInfo->pstEnabledStatusLock);
	ANT_DEBUG_V("released stEnabledStatusLock in %s", __FUNCTION__);
	}

	ANT_FUNC_END();
	}

	////////////////////////////////////////////////////////////////////
	// setFlowControl
	//
	// Sets the flow control "flag" to the value provided and signals the transmit
	// thread to check the value.
	//
	// Parameters:
	// pstChnlInfo the details of the channel being updated
	// ucFlowSetting the value to use
	//
	// Returns:
	// Success:
	// 0
	// Failure:
	// -1
	////////////////////////////////////////////////////////////////////
	int setFlowControl(ant_channel_info_t *pstChnlInfo, ANT_U8 ucFlowSetting)
	{
	int iRet = -1;
	int iMutexResult;
	ANT_FUNC_START();

	ANT_DEBUG_V("getting stFlowControlLock in %s", __FUNCTION__);
	iMutexResult = pthread_mutex_lock(pstChnlInfo->pstFlowControlLock);
	if (iMutexResult) {
	ANT_ERROR("failed to lock flow control mutex during response: %s", strerror(iMutexResult));
	} else {
	ANT_DEBUG_V("got stFlowControlLock in %s", __FUNCTION__);

	pstChnlInfo->ucFlowControlResp = ucFlowSetting;

	ANT_DEBUG_V("releasing stFlowControlLock in %s", __FUNCTION__);
	pthread_mutex_unlock(pstChnlInfo->pstFlowControlLock);
	ANT_DEBUG_V("released stFlowControlLock in %s", __FUNCTION__);

	pthread_cond_signal(pstChnlInfo->pstFlowControlCond);

	iRet = 0;
	}

	ANT_FUNC_END();
	return iRet;
	}

	int readChannelMsg(ant_channel_type eChannel, ant_channel_info_t *pstChnlInfo)
	{
	int iRet = -1;
	int iRxLenRead = 0;
	int iCurrentHciPacketOffset;
	int iHciDataSize;
	ANT_FUNC_START();

	// Keep trying to read while there is an error, and that error is EAGAIN
	{
	iRxLenRead += iRxBufferLength[eChannel]; // add existing data on
	ANT_DEBUG_D("iRxLenRead %d",iRxLenRead);
	ANT_SERIAL(aucRxBuffer[eChannel], iRxLenRead, 'R');

	// if we didn't get a full packet, then just exit
	if (iRxLenRead < (aucRxBuffer[eChannel][ANT_HCI_SIZE_OFFSET] + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE)) {
	iRxBufferLength[eChannel] = iRxLenRead;
	iRet = 0;
	goto out;
	}

	iRxBufferLength[eChannel] = 0; // reset buffer length here since we should have a full packet

	#if ANT_HCI_OPCODE_SIZE == 1 // Check the different message types by opcode
	ANT_U8 opcode = aucRxBuffer[eChannel][ANT_HCI_OPCODE_OFFSET];

	if(ANT_HCI_OPCODE_COMMAND_COMPLETE == opcode) {
	// Command Complete, so signal a FLOW_GO
	if(setFlowControl(pstChnlInfo, ANT_FLOW_GO)) {
	goto out;
	}
	} else if(ANT_HCI_OPCODE_FLOW_ON == opcode) {
	// FLow On, so resend the last Tx
	#ifdef ANT_FLOW_RESEND
	// Check if there is a message to resend
	if(pstChnlInfo->ucResendMessageLength > 0) {
	ant_tx_message_flowcontrol_none(eChannel, pstChnlInfo->ucResendMessageLength, pstChnlInfo->pucResendMessage);
	} else {
	ANT_DEBUG_D("Resend requested by chip, but tx request cancelled");
	}
	#endif // ANT_FLOW_RESEND
	} else if(ANT_HCI_OPCODE_ANT_EVENT == opcode)
	// ANT Event, send ANT packet to Rx Callback
	#endif // ANT_HCI_OPCODE_SIZE == 1
	{
	// Received an ANT packet
	iCurrentHciPacketOffset = 0;

	while(iCurrentHciPacketOffset < iRxLenRead) {
	ANT_DEBUG_D("iRxLenRead = %d",iRxLenRead);

	// TODO Allow HCI Packet Size value to be larger than 1 byte
	// This currently works as no size value is greater than 255, and little endian
	iHciDataSize = aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_SIZE_OFFSET];

	if ((iHciDataSize + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE + iCurrentHciPacketOffset) >
	iRxLenRead) {
	// we don't have a whole packet
	iRxBufferLength[eChannel] = iRxLenRead - iCurrentHciPacketOffset;
	memcpy(aucRxBuffer[eChannel], &aucRxBuffer[eChannel][iCurrentHciPacketOffset], iRxBufferLength[eChannel]);
	// the increment at the end should push us out of the while loop
	} else
	#ifdef ANT_MESG_FLOW_CONTROL
	if (aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET + ANT_MSG_ID_OFFSET] ==
	ANT_MESG_FLOW_CONTROL) {
	// This is a flow control packet, not a standard ANT message
	if(setFlowControl(pstChnlInfo, \
	aucRxBuffer[eChannel][iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET + ANT_MSG_DATA_OFFSET])) {
	goto out;
	}
	} else
	#endif // ANT_MESG_FLOW_CONTROL
	{
	ANT_U8 *msg = aucRxBuffer[eChannel] + iCurrentHciPacketOffset + ANT_HCI_DATA_OFFSET;
	ANT_BOOL bIsKeepAliveResponse = memcmp(msg, KEEPALIVE_RESP, sizeof(KEEPALIVE_RESP)/sizeof(ANT_U8)) == 0;
	if (bIsKeepAliveResponse) {
	ANT_DEBUG_V("Filtered out keepalive response.");
	} else if (pstChnlInfo->fnRxCallback != NULL) {
	ANT_DEBUG_V("call rx callback hci data size = %d",iHciDataSize);

	// Loop through read data until all HCI packets are written to callback
	pstChnlInfo->fnRxCallback(iHciDataSize, \
	msg);
	} else {
	ANT_WARN("%s rx callback is null", pstChnlInfo->pcDevicePath);
	}
	}

	iCurrentHciPacketOffset = iCurrentHciPacketOffset + ANT_HCI_HEADER_SIZE + ANT_HCI_FOOTER_SIZE + iHciDataSize;
	}
	}

	iRet = 0;
	}

	out:
	// Need to indicate that we are done handling the rx buffer and it can be
	// overwritten again.
	ant_rx_clear();
	ANT_FUNC_END();
	return iRet;
	}