| // Copyright 2018 Google Inc. All rights reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // The dexpreopt package converts a global dexpreopt config and a module dexpreopt config into rules to perform |
| // dexpreopting. |
| // |
| // It is used in two places; in the dexpeopt_gen binary for modules defined in Make, and directly linked into Soong. |
| // |
| // For Make modules it is built into the dexpreopt_gen binary, which is executed as a Make rule using global config and |
| // module config specified in JSON files. The binary writes out two shell scripts, only updating them if they have |
| // changed. One script takes an APK or JAR as an input and produces a zip file containing any outputs of preopting, |
| // in the location they should be on the device. The Make build rules will unzip the zip file into $(PRODUCT_OUT) when |
| // installing the APK, which will install the preopt outputs into $(PRODUCT_OUT)/system or $(PRODUCT_OUT)/system_other |
| // as necessary. The zip file may be empty if preopting was disabled for any reason. |
| // |
| // The intermediate shell scripts allow changes to this package or to the global config to regenerate the shell scripts |
| // but only require re-executing preopting if the script has changed. |
| // |
| // For Soong modules this package is linked directly into Soong and run from the java package. It generates the same |
| // commands as for make, using athe same global config JSON file used by make, but using a module config structure |
| // provided by Soong. The generated commands are then converted into Soong rule and written directly to the ninja file, |
| // with no extra shell scripts involved. |
| package dexpreopt |
| |
| import ( |
| "fmt" |
| "path/filepath" |
| "runtime" |
| "strings" |
| |
| "android/soong/android" |
| |
| "github.com/google/blueprint/pathtools" |
| ) |
| |
| const SystemPartition = "/system/" |
| const SystemOtherPartition = "/system_other/" |
| |
| var DexpreoptRunningInSoong = false |
| |
| // GenerateDexpreoptRule generates a set of commands that will preopt a module based on a GlobalConfig and a |
| // ModuleConfig. The produced files and their install locations will be available through rule.Installs(). |
| func GenerateDexpreoptRule(ctx android.BuilderContext, globalSoong *GlobalSoongConfig, |
| global *GlobalConfig, module *ModuleConfig) (rule *android.RuleBuilder, err error) { |
| |
| defer func() { |
| if r := recover(); r != nil { |
| if _, ok := r.(runtime.Error); ok { |
| panic(r) |
| } else if e, ok := r.(error); ok { |
| err = e |
| rule = nil |
| } else { |
| panic(r) |
| } |
| } |
| }() |
| |
| rule = android.NewRuleBuilder(pctx, ctx) |
| |
| generateProfile := module.ProfileClassListing.Valid() && !global.DisableGenerateProfile |
| generateBootProfile := module.ProfileBootListing.Valid() && !global.DisableGenerateProfile |
| |
| var profile android.WritablePath |
| if generateProfile { |
| profile = profileCommand(ctx, globalSoong, global, module, rule) |
| } |
| if generateBootProfile { |
| bootProfileCommand(ctx, globalSoong, global, module, rule) |
| } |
| |
| if !dexpreoptDisabled(ctx, global, module) { |
| if valid, err := validateClassLoaderContext(module.ClassLoaderContexts); err != nil { |
| android.ReportPathErrorf(ctx, err.Error()) |
| } else if valid { |
| fixClassLoaderContext(module.ClassLoaderContexts) |
| |
| appImage := (generateProfile || module.ForceCreateAppImage || global.DefaultAppImages) && |
| !module.NoCreateAppImage |
| |
| generateDM := shouldGenerateDM(module, global) |
| |
| for archIdx, _ := range module.Archs { |
| dexpreoptCommand(ctx, globalSoong, global, module, rule, archIdx, profile, appImage, generateDM) |
| } |
| } |
| } |
| |
| return rule, nil |
| } |
| |
| func dexpreoptDisabled(ctx android.PathContext, global *GlobalConfig, module *ModuleConfig) bool { |
| if contains(global.DisablePreoptModules, module.Name) { |
| return true |
| } |
| |
| // Don't preopt individual boot jars, they will be preopted together. |
| if global.BootJars.ContainsJar(module.Name) { |
| return true |
| } |
| |
| // If OnlyPreoptBootImageAndSystemServer=true and module is not in boot class path skip |
| // Also preopt system server jars since selinux prevents system server from loading anything from |
| // /data. If we don't do this they will need to be extracted which is not favorable for RAM usage |
| // or performance. If PreoptExtractedApk is true, we ignore the only preopt boot image options. |
| if global.OnlyPreoptBootImageAndSystemServer && !global.BootJars.ContainsJar(module.Name) && |
| !global.AllSystemServerJars(ctx).ContainsJar(module.Name) && !module.PreoptExtractedApk { |
| return true |
| } |
| |
| return false |
| } |
| |
| func profileCommand(ctx android.PathContext, globalSoong *GlobalSoongConfig, global *GlobalConfig, |
| module *ModuleConfig, rule *android.RuleBuilder) android.WritablePath { |
| |
| profilePath := module.BuildPath.InSameDir(ctx, "profile.prof") |
| profileInstalledPath := module.DexLocation + ".prof" |
| |
| if !module.ProfileIsTextListing { |
| rule.Command().Text("rm -f").Output(profilePath) |
| rule.Command().Text("touch").Output(profilePath) |
| } |
| |
| cmd := rule.Command(). |
| Text(`ANDROID_LOG_TAGS="*:e"`). |
| Tool(globalSoong.Profman) |
| |
| if module.ProfileIsTextListing { |
| // The profile is a test listing of classes (used for framework jars). |
| // We need to generate the actual binary profile before being able to compile. |
| cmd.FlagWithInput("--create-profile-from=", module.ProfileClassListing.Path()) |
| } else { |
| // The profile is binary profile (used for apps). Run it through profman to |
| // ensure the profile keys match the apk. |
| cmd. |
| Flag("--copy-and-update-profile-key"). |
| FlagWithInput("--profile-file=", module.ProfileClassListing.Path()) |
| } |
| |
| cmd. |
| Flag("--output-profile-type=app"). |
| FlagWithInput("--apk=", module.DexPath). |
| Flag("--dex-location="+module.DexLocation). |
| FlagWithOutput("--reference-profile-file=", profilePath) |
| |
| if !module.ProfileIsTextListing { |
| cmd.Text(fmt.Sprintf(`|| echo "Profile out of date for %s"`, module.DexPath)) |
| } |
| rule.Install(profilePath, profileInstalledPath) |
| |
| return profilePath |
| } |
| |
| func bootProfileCommand(ctx android.PathContext, globalSoong *GlobalSoongConfig, global *GlobalConfig, |
| module *ModuleConfig, rule *android.RuleBuilder) android.WritablePath { |
| |
| profilePath := module.BuildPath.InSameDir(ctx, "profile.bprof") |
| profileInstalledPath := module.DexLocation + ".bprof" |
| |
| if !module.ProfileIsTextListing { |
| rule.Command().Text("rm -f").Output(profilePath) |
| rule.Command().Text("touch").Output(profilePath) |
| } |
| |
| cmd := rule.Command(). |
| Text(`ANDROID_LOG_TAGS="*:e"`). |
| Tool(globalSoong.Profman) |
| |
| // The profile is a test listing of methods. |
| // We need to generate the actual binary profile. |
| cmd.FlagWithInput("--create-profile-from=", module.ProfileBootListing.Path()) |
| |
| cmd. |
| Flag("--output-profile-type=bprof"). |
| FlagWithInput("--apk=", module.DexPath). |
| Flag("--dex-location="+module.DexLocation). |
| FlagWithOutput("--reference-profile-file=", profilePath) |
| |
| if !module.ProfileIsTextListing { |
| cmd.Text(fmt.Sprintf(`|| echo "Profile out of date for %s"`, module.DexPath)) |
| } |
| rule.Install(profilePath, profileInstalledPath) |
| |
| return profilePath |
| } |
| |
| // Returns the dex location of a system server java library. |
| func GetSystemServerDexLocation(ctx android.PathContext, global *GlobalConfig, lib string) string { |
| if apex := global.AllApexSystemServerJars(ctx).ApexOfJar(lib); apex != "" { |
| return fmt.Sprintf("/apex/%s/javalib/%s.jar", apex, lib) |
| } |
| return fmt.Sprintf("/system/framework/%s.jar", lib) |
| } |
| |
| // Returns the location to the odex file for the dex file at `path`. |
| func ToOdexPath(path string, arch android.ArchType) string { |
| if strings.HasPrefix(path, "/apex/") { |
| return filepath.Join("/system/framework/oat", arch.String(), |
| strings.ReplaceAll(path[1:], "/", "@")+"@classes.odex") |
| } |
| |
| return filepath.Join(filepath.Dir(path), "oat", arch.String(), |
| pathtools.ReplaceExtension(filepath.Base(path), "odex")) |
| } |
| |
| func dexpreoptCommand(ctx android.PathContext, globalSoong *GlobalSoongConfig, global *GlobalConfig, |
| module *ModuleConfig, rule *android.RuleBuilder, archIdx int, profile android.WritablePath, |
| appImage bool, generateDM bool) { |
| |
| arch := module.Archs[archIdx] |
| |
| // HACK: make soname in Soong-generated .odex files match Make. |
| base := filepath.Base(module.DexLocation) |
| if filepath.Ext(base) == ".jar" { |
| base = "javalib.jar" |
| } else if filepath.Ext(base) == ".apk" { |
| base = "package.apk" |
| } |
| |
| odexPath := module.BuildPath.InSameDir(ctx, "oat", arch.String(), pathtools.ReplaceExtension(base, "odex")) |
| odexInstallPath := ToOdexPath(module.DexLocation, arch) |
| if odexOnSystemOther(module, global) { |
| odexInstallPath = filepath.Join(SystemOtherPartition, odexInstallPath) |
| } |
| |
| vdexPath := odexPath.ReplaceExtension(ctx, "vdex") |
| vdexInstallPath := pathtools.ReplaceExtension(odexInstallPath, "vdex") |
| |
| invocationPath := odexPath.ReplaceExtension(ctx, "invocation") |
| |
| systemServerJars := global.AllSystemServerJars(ctx) |
| systemServerClasspathJars := global.AllSystemServerClasspathJars(ctx) |
| |
| rule.Command().FlagWithArg("mkdir -p ", filepath.Dir(odexPath.String())) |
| rule.Command().FlagWithOutput("rm -f ", odexPath) |
| |
| if jarIndex := systemServerJars.IndexOfJar(module.Name); jarIndex >= 0 { |
| // System server jars should be dexpreopted together: class loader context of each jar |
| // should include all preceding jars on the system server classpath. |
| |
| var clcHost android.Paths |
| var clcTarget []string |
| endIndex := systemServerClasspathJars.IndexOfJar(module.Name) |
| if endIndex < 0 { |
| // The jar is a standalone one. Use the full classpath as the class loader context. |
| endIndex = systemServerClasspathJars.Len() |
| } |
| for i := 0; i < endIndex; i++ { |
| lib := systemServerClasspathJars.Jar(i) |
| clcHost = append(clcHost, SystemServerDexJarHostPath(ctx, lib)) |
| clcTarget = append(clcTarget, GetSystemServerDexLocation(ctx, global, lib)) |
| } |
| |
| if DexpreoptRunningInSoong { |
| // Copy the system server jar to a predefined location where dex2oat will find it. |
| dexPathHost := SystemServerDexJarHostPath(ctx, module.Name) |
| rule.Command().Text("mkdir -p").Flag(filepath.Dir(dexPathHost.String())) |
| rule.Command().Text("cp -f").Input(module.DexPath).Output(dexPathHost) |
| } else { |
| // For Make modules the copy rule is generated in the makefiles, not in dexpreopt.sh. |
| // This is necessary to expose the rule to Ninja, otherwise it has rules that depend on |
| // the jar (namely, dexpreopt commands for all subsequent system server jars that have |
| // this one in their class loader context), but no rule that creates it (because Ninja |
| // cannot see the rule in the generated dexpreopt.sh script). |
| } |
| |
| clcHostString := "PCL[" + strings.Join(clcHost.Strings(), ":") + "]" |
| clcTargetString := "PCL[" + strings.Join(clcTarget, ":") + "]" |
| |
| if systemServerClasspathJars.ContainsJar(module.Name) { |
| checkSystemServerOrder(ctx, jarIndex) |
| } else { |
| // Standalone jars are loaded by separate class loaders with SYSTEMSERVERCLASSPATH as the |
| // parent. |
| clcHostString = "PCL[];" + clcHostString |
| clcTargetString = "PCL[];" + clcTargetString |
| } |
| |
| rule.Command(). |
| Text(`class_loader_context_arg=--class-loader-context="` + clcHostString + `"`). |
| Implicits(clcHost). |
| Text(`stored_class_loader_context_arg=--stored-class-loader-context="` + clcTargetString + `"`) |
| |
| } else { |
| // There are three categories of Java modules handled here: |
| // |
| // - Modules that have passed verify_uses_libraries check. They are AOT-compiled and |
| // expected to be loaded on device without CLC mismatch errors. |
| // |
| // - Modules that have failed the check in relaxed mode, so it didn't cause a build error. |
| // They are dexpreopted with "verify" filter and not AOT-compiled. |
| // TODO(b/132357300): ensure that CLC mismatch errors are ignored with "verify" filter. |
| // |
| // - Modules that didn't run the check. They are AOT-compiled, but it's unknown if they |
| // will have CLC mismatch errors on device (the check is disabled by default). |
| // |
| // TODO(b/132357300): enable the check by default and eliminate the last category, so that |
| // no time/space is wasted on AOT-compiling modules that will fail CLC check on device. |
| |
| var manifestOrApk android.Path |
| if module.ManifestPath.Valid() { |
| // Ok, there is an XML manifest. |
| manifestOrApk = module.ManifestPath.Path() |
| } else if filepath.Ext(base) == ".apk" { |
| // Ok, there is is an APK with the manifest inside. |
| manifestOrApk = module.DexPath |
| } |
| |
| // Generate command that saves target SDK version in a shell variable. |
| if manifestOrApk == nil { |
| // There is neither an XML manifest nor APK => nowhere to extract targetSdkVersion from. |
| // Set the latest ("any") version: then construct_context will not add any compatibility |
| // libraries (if this is incorrect, there will be a CLC mismatch and dexopt on device). |
| rule.Command().Textf(`target_sdk_version=%d`, AnySdkVersion) |
| } else { |
| rule.Command().Text(`target_sdk_version="$(`). |
| Tool(globalSoong.ManifestCheck). |
| Flag("--extract-target-sdk-version"). |
| Input(manifestOrApk). |
| FlagWithInput("--aapt ", globalSoong.Aapt). |
| Text(`)"`) |
| } |
| |
| // Generate command that saves host and target class loader context in shell variables. |
| clc, paths := ComputeClassLoaderContext(module.ClassLoaderContexts) |
| rule.Command(). |
| Text(`eval "$(`).Tool(globalSoong.ConstructContext). |
| Text(` --target-sdk-version ${target_sdk_version}`). |
| Text(clc).Implicits(paths). |
| Text(`)"`) |
| } |
| |
| // Devices that do not have a product partition use a symlink from /product to /system/product. |
| // Because on-device dexopt will see dex locations starting with /product, we change the paths |
| // to mimic this behavior. |
| dexLocationArg := module.DexLocation |
| if strings.HasPrefix(dexLocationArg, "/system/product/") { |
| dexLocationArg = strings.TrimPrefix(dexLocationArg, "/system") |
| } |
| |
| cmd := rule.Command(). |
| Text(`ANDROID_LOG_TAGS="*:e"`). |
| Tool(globalSoong.Dex2oat). |
| Flag("--avoid-storing-invocation"). |
| FlagWithOutput("--write-invocation-to=", invocationPath).ImplicitOutput(invocationPath). |
| Flag("--runtime-arg").FlagWithArg("-Xms", global.Dex2oatXms). |
| Flag("--runtime-arg").FlagWithArg("-Xmx", global.Dex2oatXmx). |
| Flag("--runtime-arg").FlagWithInputList("-Xbootclasspath:", module.PreoptBootClassPathDexFiles, ":"). |
| Flag("--runtime-arg").FlagWithList("-Xbootclasspath-locations:", module.PreoptBootClassPathDexLocations, ":"). |
| Flag("${class_loader_context_arg}"). |
| Flag("${stored_class_loader_context_arg}"). |
| FlagWithArg("--boot-image=", strings.Join(module.DexPreoptImageLocationsOnHost, ":")).Implicits(module.DexPreoptImagesDeps[archIdx].Paths()). |
| FlagWithInput("--dex-file=", module.DexPath). |
| FlagWithArg("--dex-location=", dexLocationArg). |
| FlagWithOutput("--oat-file=", odexPath).ImplicitOutput(vdexPath). |
| // Pass an empty directory, dex2oat shouldn't be reading arbitrary files |
| FlagWithArg("--android-root=", global.EmptyDirectory). |
| FlagWithArg("--instruction-set=", arch.String()). |
| FlagWithArg("--instruction-set-variant=", global.CpuVariant[arch]). |
| FlagWithArg("--instruction-set-features=", global.InstructionSetFeatures[arch]). |
| Flag("--no-generate-debug-info"). |
| Flag("--generate-build-id"). |
| Flag("--abort-on-hard-verifier-error"). |
| Flag("--force-determinism"). |
| FlagWithArg("--no-inline-from=", "core-oj.jar") |
| |
| var preoptFlags []string |
| if len(module.PreoptFlags) > 0 { |
| preoptFlags = module.PreoptFlags |
| } else if len(global.PreoptFlags) > 0 { |
| preoptFlags = global.PreoptFlags |
| } |
| |
| if len(preoptFlags) > 0 { |
| cmd.Text(strings.Join(preoptFlags, " ")) |
| } |
| |
| if module.UncompressedDex { |
| cmd.FlagWithArg("--copy-dex-files=", "false") |
| } |
| |
| if !android.PrefixInList(preoptFlags, "--compiler-filter=") { |
| var compilerFilter string |
| if systemServerJars.ContainsJar(module.Name) { |
| if global.SystemServerCompilerFilter != "" { |
| // Use the product option if it is set. |
| compilerFilter = global.SystemServerCompilerFilter |
| } else if profile != nil { |
| // Use "speed-profile" for system server jars that have a profile. |
| compilerFilter = "speed-profile" |
| } else { |
| // Use "speed" for system server jars that do not have a profile. |
| compilerFilter = "speed" |
| } |
| } else if contains(global.SpeedApps, module.Name) || contains(global.SystemServerApps, module.Name) { |
| // Apps loaded into system server, and apps the product default to being compiled with the |
| // 'speed' compiler filter. |
| compilerFilter = "speed" |
| } else if profile != nil { |
| // For non system server jars, use speed-profile when we have a profile. |
| compilerFilter = "speed-profile" |
| } else if global.DefaultCompilerFilter != "" { |
| compilerFilter = global.DefaultCompilerFilter |
| } else { |
| compilerFilter = "quicken" |
| } |
| if module.EnforceUsesLibraries { |
| // If the verify_uses_libraries check failed (in this case status file contains a |
| // non-empty error message), then use "verify" compiler filter to avoid compiling any |
| // code (it would be rejected on device because of a class loader context mismatch). |
| cmd.Text("--compiler-filter=$(if test -s "). |
| Input(module.EnforceUsesLibrariesStatusFile). |
| Text(" ; then echo verify ; else echo " + compilerFilter + " ; fi)") |
| } else { |
| cmd.FlagWithArg("--compiler-filter=", compilerFilter) |
| } |
| } |
| |
| if generateDM { |
| cmd.FlagWithArg("--copy-dex-files=", "false") |
| dmPath := module.BuildPath.InSameDir(ctx, "generated.dm") |
| dmInstalledPath := pathtools.ReplaceExtension(module.DexLocation, "dm") |
| tmpPath := module.BuildPath.InSameDir(ctx, "primary.vdex") |
| rule.Command().Text("cp -f").Input(vdexPath).Output(tmpPath) |
| rule.Command().Tool(globalSoong.SoongZip). |
| FlagWithArg("-L", "9"). |
| FlagWithOutput("-o", dmPath). |
| Flag("-j"). |
| Input(tmpPath) |
| rule.Install(dmPath, dmInstalledPath) |
| } |
| |
| // By default, emit debug info. |
| debugInfo := true |
| if global.NoDebugInfo { |
| // If the global setting suppresses mini-debug-info, disable it. |
| debugInfo = false |
| } |
| |
| // PRODUCT_SYSTEM_SERVER_DEBUG_INFO overrides WITH_DEXPREOPT_DEBUG_INFO. |
| // PRODUCT_OTHER_JAVA_DEBUG_INFO overrides WITH_DEXPREOPT_DEBUG_INFO. |
| if systemServerJars.ContainsJar(module.Name) { |
| if global.AlwaysSystemServerDebugInfo { |
| debugInfo = true |
| } else if global.NeverSystemServerDebugInfo { |
| debugInfo = false |
| } |
| } else { |
| if global.AlwaysOtherDebugInfo { |
| debugInfo = true |
| } else if global.NeverOtherDebugInfo { |
| debugInfo = false |
| } |
| } |
| |
| if debugInfo { |
| cmd.Flag("--generate-mini-debug-info") |
| } else { |
| cmd.Flag("--no-generate-mini-debug-info") |
| } |
| |
| // Set the compiler reason to 'prebuilt' to identify the oat files produced |
| // during the build, as opposed to compiled on the device. |
| cmd.FlagWithArg("--compilation-reason=", "prebuilt") |
| |
| if appImage { |
| appImagePath := odexPath.ReplaceExtension(ctx, "art") |
| appImageInstallPath := pathtools.ReplaceExtension(odexInstallPath, "art") |
| cmd.FlagWithOutput("--app-image-file=", appImagePath). |
| FlagWithArg("--image-format=", "lz4") |
| if !global.DontResolveStartupStrings { |
| cmd.FlagWithArg("--resolve-startup-const-strings=", "true") |
| } |
| rule.Install(appImagePath, appImageInstallPath) |
| } |
| |
| if profile != nil { |
| cmd.FlagWithInput("--profile-file=", profile) |
| } |
| |
| rule.Install(odexPath, odexInstallPath) |
| rule.Install(vdexPath, vdexInstallPath) |
| } |
| |
| func shouldGenerateDM(module *ModuleConfig, global *GlobalConfig) bool { |
| // Generating DM files only makes sense for verify, avoid doing for non verify compiler filter APKs. |
| // No reason to use a dm file if the dex is already uncompressed. |
| return global.GenerateDMFiles && !module.UncompressedDex && |
| contains(module.PreoptFlags, "--compiler-filter=verify") |
| } |
| |
| func OdexOnSystemOtherByName(name string, dexLocation string, global *GlobalConfig) bool { |
| if !global.HasSystemOther { |
| return false |
| } |
| |
| if global.SanitizeLite { |
| return false |
| } |
| |
| if contains(global.SpeedApps, name) || contains(global.SystemServerApps, name) { |
| return false |
| } |
| |
| for _, f := range global.PatternsOnSystemOther { |
| if makefileMatch(filepath.Join(SystemPartition, f), dexLocation) { |
| return true |
| } |
| } |
| |
| return false |
| } |
| |
| func odexOnSystemOther(module *ModuleConfig, global *GlobalConfig) bool { |
| return OdexOnSystemOtherByName(module.Name, module.DexLocation, global) |
| } |
| |
| // PathToLocation converts .../system/framework/arm64/boot.art to .../system/framework/boot.art |
| func PathToLocation(path android.Path, arch android.ArchType) string { |
| return PathStringToLocation(path.String(), arch) |
| } |
| |
| // PathStringToLocation converts .../system/framework/arm64/boot.art to .../system/framework/boot.art |
| func PathStringToLocation(path string, arch android.ArchType) string { |
| pathArch := filepath.Base(filepath.Dir(path)) |
| if pathArch != arch.String() { |
| panic(fmt.Errorf("last directory in %q must be %q", path, arch.String())) |
| } |
| return filepath.Join(filepath.Dir(filepath.Dir(path)), filepath.Base(path)) |
| } |
| |
| func makefileMatch(pattern, s string) bool { |
| percent := strings.IndexByte(pattern, '%') |
| switch percent { |
| case -1: |
| return pattern == s |
| case len(pattern) - 1: |
| return strings.HasPrefix(s, pattern[:len(pattern)-1]) |
| default: |
| panic(fmt.Errorf("unsupported makefile pattern %q", pattern)) |
| } |
| } |
| |
| // A predefined location for the system server dex jars. This is needed in order to generate |
| // class loader context for dex2oat, as the path to the jar in the Soong module may be unknown |
| // at that time (Soong processes the jars in dependency order, which may be different from the |
| // the system server classpath order). |
| func SystemServerDexJarHostPath(ctx android.PathContext, jar string) android.OutputPath { |
| if DexpreoptRunningInSoong { |
| // Soong module, just use the default output directory $OUT/soong. |
| return android.PathForOutput(ctx, "system_server_dexjars", jar+".jar") |
| } else { |
| // Make module, default output directory is $OUT (passed via the "null config" created |
| // by dexpreopt_gen). Append Soong subdirectory to match Soong module paths. |
| return android.PathForOutput(ctx, "soong", "system_server_dexjars", jar+".jar") |
| } |
| } |
| |
| // Check the order of jars on the system server classpath and give a warning/error if a jar precedes |
| // one of its dependencies. This is not an error, but a missed optimization, as dexpreopt won't |
| // have the dependency jar in the class loader context, and it won't be able to resolve any |
| // references to its classes and methods. |
| func checkSystemServerOrder(ctx android.PathContext, jarIndex int) { |
| mctx, isModule := ctx.(android.ModuleContext) |
| if isModule { |
| config := GetGlobalConfig(ctx) |
| jars := config.AllSystemServerClasspathJars(ctx) |
| mctx.WalkDeps(func(dep android.Module, parent android.Module) bool { |
| depIndex := jars.IndexOfJar(dep.Name()) |
| if jarIndex < depIndex && !config.BrokenSuboptimalOrderOfSystemServerJars { |
| jar := jars.Jar(jarIndex) |
| dep := jars.Jar(depIndex) |
| mctx.ModuleErrorf("non-optimal order of jars on the system server classpath:"+ |
| " '%s' precedes its dependency '%s', so dexpreopt is unable to resolve any"+ |
| " references from '%s' to '%s'.\n", jar, dep, jar, dep) |
| } |
| return true |
| }) |
| } |
| } |
| |
| // Returns path to a file containing the reult of verify_uses_libraries check (empty if the check |
| // has succeeded, or an error message if it failed). |
| func UsesLibrariesStatusFile(ctx android.ModuleContext) android.WritablePath { |
| return android.PathForModuleOut(ctx, "enforce_uses_libraries.status") |
| } |
| |
| func contains(l []string, s string) bool { |
| for _, e := range l { |
| if e == s { |
| return true |
| } |
| } |
| return false |
| } |
| |
| var copyOf = android.CopyOf |