| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "method_verifier.h" |
| |
| #include <iostream> |
| |
| #include "base/logging.h" |
| #include "base/mutex-inl.h" |
| #include "base/stringpiece.h" |
| #include "class_linker.h" |
| #include "compiler_callbacks.h" |
| #include "dex_file-inl.h" |
| #include "dex_instruction-inl.h" |
| #include "dex_instruction_visitor.h" |
| #include "gc/accounting/card_table-inl.h" |
| #include "indenter.h" |
| #include "intern_table.h" |
| #include "leb128.h" |
| #include "mirror/art_field-inl.h" |
| #include "mirror/art_method-inl.h" |
| #include "mirror/class.h" |
| #include "mirror/class-inl.h" |
| #include "mirror/dex_cache-inl.h" |
| #include "mirror/object-inl.h" |
| #include "mirror/object_array-inl.h" |
| #include "object_utils.h" |
| #include "register_line-inl.h" |
| #include "runtime.h" |
| #include "scoped_thread_state_change.h" |
| #include "verifier/dex_gc_map.h" |
| |
| namespace art { |
| namespace verifier { |
| |
| static const bool gDebugVerify = false; |
| // TODO: Add a constant to method_verifier to turn on verbose logging? |
| |
| void PcToRegisterLineTable::Init(RegisterTrackingMode mode, InstructionFlags* flags, |
| uint32_t insns_size, uint16_t registers_size, |
| MethodVerifier* verifier) { |
| DCHECK_GT(insns_size, 0U); |
| register_lines_.reset(new RegisterLine*[insns_size]()); |
| size_ = insns_size; |
| for (uint32_t i = 0; i < insns_size; i++) { |
| bool interesting = false; |
| switch (mode) { |
| case kTrackRegsAll: |
| interesting = flags[i].IsOpcode(); |
| break; |
| case kTrackCompilerInterestPoints: |
| interesting = flags[i].IsCompileTimeInfoPoint() || flags[i].IsBranchTarget(); |
| break; |
| case kTrackRegsBranches: |
| interesting = flags[i].IsBranchTarget(); |
| break; |
| default: |
| break; |
| } |
| if (interesting) { |
| register_lines_[i] = RegisterLine::Create(registers_size, verifier); |
| } |
| } |
| } |
| |
| PcToRegisterLineTable::~PcToRegisterLineTable() { |
| for (size_t i = 0; i < size_; i++) { |
| delete register_lines_[i]; |
| if (kIsDebugBuild) { |
| register_lines_[i] = nullptr; |
| } |
| } |
| } |
| |
| MethodVerifier::FailureKind MethodVerifier::VerifyClass(mirror::Class* klass, |
| bool allow_soft_failures, |
| std::string* error) { |
| if (klass->IsVerified()) { |
| return kNoFailure; |
| } |
| bool early_failure = false; |
| std::string failure_message; |
| ClassHelper kh(klass); |
| const DexFile& dex_file = kh.GetDexFile(); |
| const DexFile::ClassDef* class_def = kh.GetClassDef(); |
| mirror::Class* super = klass->GetSuperClass(); |
| if (super == NULL && strcmp("Ljava/lang/Object;", kh.GetDescriptor()) != 0) { |
| early_failure = true; |
| failure_message = " that has no super class"; |
| } else if (super != NULL && super->IsFinal()) { |
| early_failure = true; |
| failure_message = " that attempts to sub-class final class " + PrettyDescriptor(super); |
| } else if (class_def == NULL) { |
| early_failure = true; |
| failure_message = " that isn't present in dex file " + dex_file.GetLocation(); |
| } |
| if (early_failure) { |
| *error = "Verifier rejected class " + PrettyDescriptor(klass) + failure_message; |
| if (Runtime::Current()->IsCompiler()) { |
| ClassReference ref(&dex_file, klass->GetDexClassDefIndex()); |
| Runtime::Current()->GetCompilerCallbacks()->ClassRejected(ref); |
| } |
| return kHardFailure; |
| } |
| Thread* self = Thread::Current(); |
| SirtRef<mirror::DexCache> dex_cache(self, kh.GetDexCache()); |
| SirtRef<mirror::ClassLoader> class_loader(self, klass->GetClassLoader()); |
| return VerifyClass(&dex_file, dex_cache, class_loader, class_def, allow_soft_failures, error); |
| } |
| |
| MethodVerifier::FailureKind MethodVerifier::VerifyClass(const DexFile* dex_file, |
| SirtRef<mirror::DexCache>& dex_cache, |
| SirtRef<mirror::ClassLoader>& class_loader, |
| const DexFile::ClassDef* class_def, |
| bool allow_soft_failures, |
| std::string* error) { |
| DCHECK(class_def != nullptr); |
| const byte* class_data = dex_file->GetClassData(*class_def); |
| if (class_data == NULL) { |
| // empty class, probably a marker interface |
| return kNoFailure; |
| } |
| ClassDataItemIterator it(*dex_file, class_data); |
| while (it.HasNextStaticField() || it.HasNextInstanceField()) { |
| it.Next(); |
| } |
| size_t error_count = 0; |
| bool hard_fail = false; |
| ClassLinker* linker = Runtime::Current()->GetClassLinker(); |
| int64_t previous_direct_method_idx = -1; |
| while (it.HasNextDirectMethod()) { |
| uint32_t method_idx = it.GetMemberIndex(); |
| if (method_idx == previous_direct_method_idx) { |
| // smali can create dex files with two encoded_methods sharing the same method_idx |
| // http://code.google.com/p/smali/issues/detail?id=119 |
| it.Next(); |
| continue; |
| } |
| previous_direct_method_idx = method_idx; |
| InvokeType type = it.GetMethodInvokeType(*class_def); |
| mirror::ArtMethod* method = |
| linker->ResolveMethod(*dex_file, method_idx, dex_cache, class_loader, NULL, type); |
| if (method == NULL) { |
| DCHECK(Thread::Current()->IsExceptionPending()); |
| // We couldn't resolve the method, but continue regardless. |
| Thread::Current()->ClearException(); |
| } |
| MethodVerifier::FailureKind result = VerifyMethod(method_idx, |
| dex_file, |
| dex_cache, |
| class_loader, |
| class_def, |
| it.GetMethodCodeItem(), |
| method, |
| it.GetMemberAccessFlags(), |
| allow_soft_failures); |
| if (result != kNoFailure) { |
| if (result == kHardFailure) { |
| hard_fail = true; |
| if (error_count > 0) { |
| *error += "\n"; |
| } |
| *error = "Verifier rejected class "; |
| *error += PrettyDescriptor(dex_file->GetClassDescriptor(*class_def)); |
| *error += " due to bad method "; |
| *error += PrettyMethod(method_idx, *dex_file); |
| } |
| ++error_count; |
| } |
| it.Next(); |
| } |
| int64_t previous_virtual_method_idx = -1; |
| while (it.HasNextVirtualMethod()) { |
| uint32_t method_idx = it.GetMemberIndex(); |
| if (method_idx == previous_virtual_method_idx) { |
| // smali can create dex files with two encoded_methods sharing the same method_idx |
| // http://code.google.com/p/smali/issues/detail?id=119 |
| it.Next(); |
| continue; |
| } |
| previous_virtual_method_idx = method_idx; |
| InvokeType type = it.GetMethodInvokeType(*class_def); |
| mirror::ArtMethod* method = |
| linker->ResolveMethod(*dex_file, method_idx, dex_cache, class_loader, NULL, type); |
| if (method == NULL) { |
| DCHECK(Thread::Current()->IsExceptionPending()); |
| // We couldn't resolve the method, but continue regardless. |
| Thread::Current()->ClearException(); |
| } |
| MethodVerifier::FailureKind result = VerifyMethod(method_idx, |
| dex_file, |
| dex_cache, |
| class_loader, |
| class_def, |
| it.GetMethodCodeItem(), |
| method, |
| it.GetMemberAccessFlags(), |
| allow_soft_failures); |
| if (result != kNoFailure) { |
| if (result == kHardFailure) { |
| hard_fail = true; |
| if (error_count > 0) { |
| *error += "\n"; |
| } |
| *error = "Verifier rejected class "; |
| *error += PrettyDescriptor(dex_file->GetClassDescriptor(*class_def)); |
| *error += " due to bad method "; |
| *error += PrettyMethod(method_idx, *dex_file); |
| } |
| ++error_count; |
| } |
| it.Next(); |
| } |
| if (error_count == 0) { |
| return kNoFailure; |
| } else { |
| return hard_fail ? kHardFailure : kSoftFailure; |
| } |
| } |
| |
| MethodVerifier::FailureKind MethodVerifier::VerifyMethod(uint32_t method_idx, |
| const DexFile* dex_file, |
| SirtRef<mirror::DexCache>& dex_cache, |
| SirtRef<mirror::ClassLoader>& class_loader, |
| const DexFile::ClassDef* class_def, |
| const DexFile::CodeItem* code_item, |
| mirror::ArtMethod* method, |
| uint32_t method_access_flags, |
| bool allow_soft_failures) { |
| MethodVerifier::FailureKind result = kNoFailure; |
| uint64_t start_ns = NanoTime(); |
| |
| MethodVerifier verifier_(dex_file, &dex_cache, &class_loader, class_def, code_item, |
| method_idx, method, method_access_flags, true, allow_soft_failures); |
| if (verifier_.Verify()) { |
| // Verification completed, however failures may be pending that didn't cause the verification |
| // to hard fail. |
| CHECK(!verifier_.have_pending_hard_failure_); |
| if (verifier_.failures_.size() != 0) { |
| if (VLOG_IS_ON(verifier)) { |
| verifier_.DumpFailures(VLOG_STREAM(verifier) << "Soft verification failures in " |
| << PrettyMethod(method_idx, *dex_file) << "\n"); |
| } |
| result = kSoftFailure; |
| } |
| } else { |
| // Bad method data. |
| CHECK_NE(verifier_.failures_.size(), 0U); |
| CHECK(verifier_.have_pending_hard_failure_); |
| verifier_.DumpFailures(LOG(INFO) << "Verification error in " |
| << PrettyMethod(method_idx, *dex_file) << "\n"); |
| if (gDebugVerify) { |
| std::cout << "\n" << verifier_.info_messages_.str(); |
| verifier_.Dump(std::cout); |
| } |
| result = kHardFailure; |
| } |
| uint64_t duration_ns = NanoTime() - start_ns; |
| if (duration_ns > MsToNs(100)) { |
| LOG(WARNING) << "Verification of " << PrettyMethod(method_idx, *dex_file) |
| << " took " << PrettyDuration(duration_ns); |
| } |
| return result; |
| } |
| |
| void MethodVerifier::VerifyMethodAndDump(std::ostream& os, uint32_t dex_method_idx, |
| const DexFile* dex_file, |
| SirtRef<mirror::DexCache>& dex_cache, |
| SirtRef<mirror::ClassLoader>& class_loader, |
| const DexFile::ClassDef* class_def, |
| const DexFile::CodeItem* code_item, |
| mirror::ArtMethod* method, |
| uint32_t method_access_flags) { |
| MethodVerifier verifier(dex_file, &dex_cache, &class_loader, class_def, code_item, |
| dex_method_idx, method, method_access_flags, true, true); |
| verifier.Verify(); |
| verifier.DumpFailures(os); |
| os << verifier.info_messages_.str(); |
| verifier.Dump(os); |
| } |
| |
| MethodVerifier::MethodVerifier(const DexFile* dex_file, SirtRef<mirror::DexCache>* dex_cache, |
| SirtRef<mirror::ClassLoader>* class_loader, |
| const DexFile::ClassDef* class_def, |
| const DexFile::CodeItem* code_item, uint32_t dex_method_idx, |
| mirror::ArtMethod* method, uint32_t method_access_flags, |
| bool can_load_classes, bool allow_soft_failures) |
| : reg_types_(can_load_classes), |
| work_insn_idx_(-1), |
| dex_method_idx_(dex_method_idx), |
| mirror_method_(method), |
| method_access_flags_(method_access_flags), |
| return_type_(nullptr), |
| dex_file_(dex_file), |
| dex_cache_(dex_cache), |
| class_loader_(class_loader), |
| class_def_(class_def), |
| code_item_(code_item), |
| declaring_class_(NULL), |
| interesting_dex_pc_(-1), |
| monitor_enter_dex_pcs_(nullptr), |
| have_pending_hard_failure_(false), |
| have_pending_runtime_throw_failure_(false), |
| new_instance_count_(0), |
| monitor_enter_count_(0), |
| can_load_classes_(can_load_classes), |
| allow_soft_failures_(allow_soft_failures), |
| has_check_casts_(false), |
| has_virtual_or_interface_invokes_(false) { |
| Runtime::Current()->AddMethodVerifier(this); |
| DCHECK(class_def != nullptr); |
| } |
| |
| MethodVerifier::~MethodVerifier() { |
| Runtime::Current()->RemoveMethodVerifier(this); |
| STLDeleteElements(&failure_messages_); |
| } |
| |
| void MethodVerifier::FindLocksAtDexPc(mirror::ArtMethod* m, uint32_t dex_pc, |
| std::vector<uint32_t>& monitor_enter_dex_pcs) { |
| MethodHelper mh(m); |
| Thread* self = Thread::Current(); |
| SirtRef<mirror::DexCache> dex_cache(self, mh.GetDexCache()); |
| SirtRef<mirror::ClassLoader> class_loader(self, mh.GetClassLoader()); |
| MethodVerifier verifier(&mh.GetDexFile(), &dex_cache, &class_loader, &mh.GetClassDef(), |
| mh.GetCodeItem(), m->GetDexMethodIndex(), m, m->GetAccessFlags(), false, |
| true); |
| verifier.interesting_dex_pc_ = dex_pc; |
| verifier.monitor_enter_dex_pcs_ = &monitor_enter_dex_pcs; |
| verifier.FindLocksAtDexPc(); |
| } |
| |
| void MethodVerifier::FindLocksAtDexPc() { |
| CHECK(monitor_enter_dex_pcs_ != NULL); |
| CHECK(code_item_ != NULL); // This only makes sense for methods with code. |
| |
| // Strictly speaking, we ought to be able to get away with doing a subset of the full method |
| // verification. In practice, the phase we want relies on data structures set up by all the |
| // earlier passes, so we just run the full method verification and bail out early when we've |
| // got what we wanted. |
| Verify(); |
| } |
| |
| mirror::ArtField* MethodVerifier::FindAccessedFieldAtDexPc(mirror::ArtMethod* m, |
| uint32_t dex_pc) { |
| MethodHelper mh(m); |
| Thread* self = Thread::Current(); |
| SirtRef<mirror::DexCache> dex_cache(self, mh.GetDexCache()); |
| SirtRef<mirror::ClassLoader> class_loader(self, mh.GetClassLoader()); |
| MethodVerifier verifier(&mh.GetDexFile(), &dex_cache, &class_loader, &mh.GetClassDef(), |
| mh.GetCodeItem(), m->GetDexMethodIndex(), m, m->GetAccessFlags(), false, |
| true); |
| return verifier.FindAccessedFieldAtDexPc(dex_pc); |
| } |
| |
| mirror::ArtField* MethodVerifier::FindAccessedFieldAtDexPc(uint32_t dex_pc) { |
| CHECK(code_item_ != NULL); // This only makes sense for methods with code. |
| |
| // Strictly speaking, we ought to be able to get away with doing a subset of the full method |
| // verification. In practice, the phase we want relies on data structures set up by all the |
| // earlier passes, so we just run the full method verification and bail out early when we've |
| // got what we wanted. |
| bool success = Verify(); |
| if (!success) { |
| return NULL; |
| } |
| RegisterLine* register_line = reg_table_.GetLine(dex_pc); |
| if (register_line == NULL) { |
| return NULL; |
| } |
| const Instruction* inst = Instruction::At(code_item_->insns_ + dex_pc); |
| return GetQuickFieldAccess(inst, register_line); |
| } |
| |
| mirror::ArtMethod* MethodVerifier::FindInvokedMethodAtDexPc(mirror::ArtMethod* m, |
| uint32_t dex_pc) { |
| MethodHelper mh(m); |
| Thread* self = Thread::Current(); |
| SirtRef<mirror::DexCache> dex_cache(self, mh.GetDexCache()); |
| SirtRef<mirror::ClassLoader> class_loader(self, mh.GetClassLoader()); |
| MethodVerifier verifier(&mh.GetDexFile(), &dex_cache, &class_loader, &mh.GetClassDef(), |
| mh.GetCodeItem(), m->GetDexMethodIndex(), m, m->GetAccessFlags(), false, |
| true); |
| return verifier.FindInvokedMethodAtDexPc(dex_pc); |
| } |
| |
| mirror::ArtMethod* MethodVerifier::FindInvokedMethodAtDexPc(uint32_t dex_pc) { |
| CHECK(code_item_ != NULL); // This only makes sense for methods with code. |
| |
| // Strictly speaking, we ought to be able to get away with doing a subset of the full method |
| // verification. In practice, the phase we want relies on data structures set up by all the |
| // earlier passes, so we just run the full method verification and bail out early when we've |
| // got what we wanted. |
| bool success = Verify(); |
| if (!success) { |
| return NULL; |
| } |
| RegisterLine* register_line = reg_table_.GetLine(dex_pc); |
| if (register_line == NULL) { |
| return NULL; |
| } |
| const Instruction* inst = Instruction::At(code_item_->insns_ + dex_pc); |
| const bool is_range = (inst->Opcode() == Instruction::INVOKE_VIRTUAL_RANGE_QUICK); |
| return GetQuickInvokedMethod(inst, register_line, is_range); |
| } |
| |
| bool MethodVerifier::Verify() { |
| // If there aren't any instructions, make sure that's expected, then exit successfully. |
| if (code_item_ == NULL) { |
| if ((method_access_flags_ & (kAccNative | kAccAbstract)) == 0) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "zero-length code in concrete non-native method"; |
| return false; |
| } else { |
| return true; |
| } |
| } |
| // Sanity-check the register counts. ins + locals = registers, so make sure that ins <= registers. |
| if (code_item_->ins_size_ > code_item_->registers_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad register counts (ins=" << code_item_->ins_size_ |
| << " regs=" << code_item_->registers_size_; |
| return false; |
| } |
| // Allocate and initialize an array to hold instruction data. |
| insn_flags_.reset(new InstructionFlags[code_item_->insns_size_in_code_units_]()); |
| // Run through the instructions and see if the width checks out. |
| bool result = ComputeWidthsAndCountOps(); |
| // Flag instructions guarded by a "try" block and check exception handlers. |
| result = result && ScanTryCatchBlocks(); |
| // Perform static instruction verification. |
| result = result && VerifyInstructions(); |
| // Perform code-flow analysis and return. |
| result = result && VerifyCodeFlow(); |
| // Compute information for compiler. |
| if (result && Runtime::Current()->IsCompiler()) { |
| result = Runtime::Current()->GetCompilerCallbacks()->MethodVerified(this); |
| } |
| return result; |
| } |
| |
| std::ostream& MethodVerifier::Fail(VerifyError error) { |
| switch (error) { |
| case VERIFY_ERROR_NO_CLASS: |
| case VERIFY_ERROR_NO_FIELD: |
| case VERIFY_ERROR_NO_METHOD: |
| case VERIFY_ERROR_ACCESS_CLASS: |
| case VERIFY_ERROR_ACCESS_FIELD: |
| case VERIFY_ERROR_ACCESS_METHOD: |
| case VERIFY_ERROR_INSTANTIATION: |
| case VERIFY_ERROR_CLASS_CHANGE: |
| if (Runtime::Current()->IsCompiler() || !can_load_classes_) { |
| // If we're optimistically running verification at compile time, turn NO_xxx, ACCESS_xxx, |
| // class change and instantiation errors into soft verification errors so that we re-verify |
| // at runtime. We may fail to find or to agree on access because of not yet available class |
| // loaders, or class loaders that will differ at runtime. In these cases, we don't want to |
| // affect the soundness of the code being compiled. Instead, the generated code runs "slow |
| // paths" that dynamically perform the verification and cause the behavior to be that akin |
| // to an interpreter. |
| error = VERIFY_ERROR_BAD_CLASS_SOFT; |
| } else { |
| // If we fail again at runtime, mark that this instruction would throw and force this |
| // method to be executed using the interpreter with checks. |
| have_pending_runtime_throw_failure_ = true; |
| } |
| break; |
| // Indication that verification should be retried at runtime. |
| case VERIFY_ERROR_BAD_CLASS_SOFT: |
| if (!allow_soft_failures_) { |
| have_pending_hard_failure_ = true; |
| } |
| break; |
| // Hard verification failures at compile time will still fail at runtime, so the class is |
| // marked as rejected to prevent it from being compiled. |
| case VERIFY_ERROR_BAD_CLASS_HARD: { |
| if (Runtime::Current()->IsCompiler()) { |
| ClassReference ref(dex_file_, dex_file_->GetIndexForClassDef(*class_def_)); |
| Runtime::Current()->GetCompilerCallbacks()->ClassRejected(ref); |
| } |
| have_pending_hard_failure_ = true; |
| break; |
| } |
| } |
| failures_.push_back(error); |
| std::string location(StringPrintf("%s: [0x%X]", PrettyMethod(dex_method_idx_, *dex_file_).c_str(), |
| work_insn_idx_)); |
| std::ostringstream* failure_message = new std::ostringstream(location); |
| failure_messages_.push_back(failure_message); |
| return *failure_message; |
| } |
| |
| void MethodVerifier::PrependToLastFailMessage(std::string prepend) { |
| size_t failure_num = failure_messages_.size(); |
| DCHECK_NE(failure_num, 0U); |
| std::ostringstream* last_fail_message = failure_messages_[failure_num - 1]; |
| prepend += last_fail_message->str(); |
| failure_messages_[failure_num - 1] = new std::ostringstream(prepend); |
| delete last_fail_message; |
| } |
| |
| void MethodVerifier::AppendToLastFailMessage(std::string append) { |
| size_t failure_num = failure_messages_.size(); |
| DCHECK_NE(failure_num, 0U); |
| std::ostringstream* last_fail_message = failure_messages_[failure_num - 1]; |
| (*last_fail_message) << append; |
| } |
| |
| bool MethodVerifier::ComputeWidthsAndCountOps() { |
| const uint16_t* insns = code_item_->insns_; |
| size_t insns_size = code_item_->insns_size_in_code_units_; |
| const Instruction* inst = Instruction::At(insns); |
| size_t new_instance_count = 0; |
| size_t monitor_enter_count = 0; |
| size_t dex_pc = 0; |
| |
| while (dex_pc < insns_size) { |
| Instruction::Code opcode = inst->Opcode(); |
| switch (opcode) { |
| case Instruction::APUT_OBJECT: |
| case Instruction::CHECK_CAST: |
| has_check_casts_ = true; |
| break; |
| case Instruction::INVOKE_VIRTUAL: |
| case Instruction::INVOKE_VIRTUAL_RANGE: |
| case Instruction::INVOKE_INTERFACE: |
| case Instruction::INVOKE_INTERFACE_RANGE: |
| has_virtual_or_interface_invokes_ = true; |
| break; |
| case Instruction::MONITOR_ENTER: |
| monitor_enter_count++; |
| break; |
| case Instruction::NEW_INSTANCE: |
| new_instance_count++; |
| break; |
| default: |
| break; |
| } |
| size_t inst_size = inst->SizeInCodeUnits(); |
| insn_flags_[dex_pc].SetLengthInCodeUnits(inst_size); |
| dex_pc += inst_size; |
| inst = inst->Next(); |
| } |
| |
| if (dex_pc != insns_size) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "code did not end where expected (" |
| << dex_pc << " vs. " << insns_size << ")"; |
| return false; |
| } |
| |
| new_instance_count_ = new_instance_count; |
| monitor_enter_count_ = monitor_enter_count; |
| return true; |
| } |
| |
| bool MethodVerifier::ScanTryCatchBlocks() { |
| uint32_t tries_size = code_item_->tries_size_; |
| if (tries_size == 0) { |
| return true; |
| } |
| uint32_t insns_size = code_item_->insns_size_in_code_units_; |
| const DexFile::TryItem* tries = DexFile::GetTryItems(*code_item_, 0); |
| |
| for (uint32_t idx = 0; idx < tries_size; idx++) { |
| const DexFile::TryItem* try_item = &tries[idx]; |
| uint32_t start = try_item->start_addr_; |
| uint32_t end = start + try_item->insn_count_; |
| if ((start >= end) || (start >= insns_size) || (end > insns_size)) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad exception entry: startAddr=" << start |
| << " endAddr=" << end << " (size=" << insns_size << ")"; |
| return false; |
| } |
| if (!insn_flags_[start].IsOpcode()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) |
| << "'try' block starts inside an instruction (" << start << ")"; |
| return false; |
| } |
| for (uint32_t dex_pc = start; dex_pc < end; |
| dex_pc += insn_flags_[dex_pc].GetLengthInCodeUnits()) { |
| insn_flags_[dex_pc].SetInTry(); |
| } |
| } |
| // Iterate over each of the handlers to verify target addresses. |
| const byte* handlers_ptr = DexFile::GetCatchHandlerData(*code_item_, 0); |
| uint32_t handlers_size = DecodeUnsignedLeb128(&handlers_ptr); |
| ClassLinker* linker = Runtime::Current()->GetClassLinker(); |
| for (uint32_t idx = 0; idx < handlers_size; idx++) { |
| CatchHandlerIterator iterator(handlers_ptr); |
| for (; iterator.HasNext(); iterator.Next()) { |
| uint32_t dex_pc= iterator.GetHandlerAddress(); |
| if (!insn_flags_[dex_pc].IsOpcode()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) |
| << "exception handler starts at bad address (" << dex_pc << ")"; |
| return false; |
| } |
| insn_flags_[dex_pc].SetBranchTarget(); |
| // Ensure exception types are resolved so that they don't need resolution to be delivered, |
| // unresolved exception types will be ignored by exception delivery |
| if (iterator.GetHandlerTypeIndex() != DexFile::kDexNoIndex16) { |
| mirror::Class* exception_type = linker->ResolveType(*dex_file_, |
| iterator.GetHandlerTypeIndex(), |
| *dex_cache_, *class_loader_); |
| if (exception_type == NULL) { |
| DCHECK(Thread::Current()->IsExceptionPending()); |
| Thread::Current()->ClearException(); |
| } |
| } |
| } |
| handlers_ptr = iterator.EndDataPointer(); |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::VerifyInstructions() { |
| const Instruction* inst = Instruction::At(code_item_->insns_); |
| |
| /* Flag the start of the method as a branch target, and a GC point due to stack overflow errors */ |
| insn_flags_[0].SetBranchTarget(); |
| insn_flags_[0].SetCompileTimeInfoPoint(); |
| |
| uint32_t insns_size = code_item_->insns_size_in_code_units_; |
| for (uint32_t dex_pc = 0; dex_pc < insns_size;) { |
| if (!VerifyInstruction(inst, dex_pc)) { |
| DCHECK_NE(failures_.size(), 0U); |
| return false; |
| } |
| /* Flag instructions that are garbage collection points */ |
| // All invoke points are marked as "Throw" points already. |
| // We are relying on this to also count all the invokes as interesting. |
| if (inst->IsBranch() || inst->IsSwitch() || inst->IsThrow()) { |
| insn_flags_[dex_pc].SetCompileTimeInfoPoint(); |
| } else if (inst->IsReturn()) { |
| insn_flags_[dex_pc].SetCompileTimeInfoPointAndReturn(); |
| } |
| dex_pc += inst->SizeInCodeUnits(); |
| inst = inst->Next(); |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::VerifyInstruction(const Instruction* inst, uint32_t code_offset) { |
| DecodedInstruction dec_insn(inst); |
| bool result = true; |
| switch (inst->GetVerifyTypeArgumentA()) { |
| case Instruction::kVerifyRegA: |
| result = result && CheckRegisterIndex(dec_insn.vA); |
| break; |
| case Instruction::kVerifyRegAWide: |
| result = result && CheckWideRegisterIndex(dec_insn.vA); |
| break; |
| } |
| switch (inst->GetVerifyTypeArgumentB()) { |
| case Instruction::kVerifyRegB: |
| result = result && CheckRegisterIndex(dec_insn.vB); |
| break; |
| case Instruction::kVerifyRegBField: |
| result = result && CheckFieldIndex(dec_insn.vB); |
| break; |
| case Instruction::kVerifyRegBMethod: |
| result = result && CheckMethodIndex(dec_insn.vB); |
| break; |
| case Instruction::kVerifyRegBNewInstance: |
| result = result && CheckNewInstance(dec_insn.vB); |
| break; |
| case Instruction::kVerifyRegBString: |
| result = result && CheckStringIndex(dec_insn.vB); |
| break; |
| case Instruction::kVerifyRegBType: |
| result = result && CheckTypeIndex(dec_insn.vB); |
| break; |
| case Instruction::kVerifyRegBWide: |
| result = result && CheckWideRegisterIndex(dec_insn.vB); |
| break; |
| } |
| switch (inst->GetVerifyTypeArgumentC()) { |
| case Instruction::kVerifyRegC: |
| result = result && CheckRegisterIndex(dec_insn.vC); |
| break; |
| case Instruction::kVerifyRegCField: |
| result = result && CheckFieldIndex(dec_insn.vC); |
| break; |
| case Instruction::kVerifyRegCNewArray: |
| result = result && CheckNewArray(dec_insn.vC); |
| break; |
| case Instruction::kVerifyRegCType: |
| result = result && CheckTypeIndex(dec_insn.vC); |
| break; |
| case Instruction::kVerifyRegCWide: |
| result = result && CheckWideRegisterIndex(dec_insn.vC); |
| break; |
| } |
| switch (inst->GetVerifyExtraFlags()) { |
| case Instruction::kVerifyArrayData: |
| result = result && CheckArrayData(code_offset); |
| break; |
| case Instruction::kVerifyBranchTarget: |
| result = result && CheckBranchTarget(code_offset); |
| break; |
| case Instruction::kVerifySwitchTargets: |
| result = result && CheckSwitchTargets(code_offset); |
| break; |
| case Instruction::kVerifyVarArg: |
| result = result && CheckVarArgRegs(dec_insn.vA, dec_insn.arg); |
| break; |
| case Instruction::kVerifyVarArgRange: |
| result = result && CheckVarArgRangeRegs(dec_insn.vA, dec_insn.vC); |
| break; |
| case Instruction::kVerifyError: |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unexpected opcode " << inst->Name(); |
| result = false; |
| break; |
| } |
| return result; |
| } |
| |
| bool MethodVerifier::CheckRegisterIndex(uint32_t idx) { |
| if (idx >= code_item_->registers_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "register index out of range (" << idx << " >= " |
| << code_item_->registers_size_ << ")"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckWideRegisterIndex(uint32_t idx) { |
| if (idx + 1 >= code_item_->registers_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "wide register index out of range (" << idx |
| << "+1 >= " << code_item_->registers_size_ << ")"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckFieldIndex(uint32_t idx) { |
| if (idx >= dex_file_->GetHeader().field_ids_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad field index " << idx << " (max " |
| << dex_file_->GetHeader().field_ids_size_ << ")"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckMethodIndex(uint32_t idx) { |
| if (idx >= dex_file_->GetHeader().method_ids_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad method index " << idx << " (max " |
| << dex_file_->GetHeader().method_ids_size_ << ")"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckNewInstance(uint32_t idx) { |
| if (idx >= dex_file_->GetHeader().type_ids_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad type index " << idx << " (max " |
| << dex_file_->GetHeader().type_ids_size_ << ")"; |
| return false; |
| } |
| // We don't need the actual class, just a pointer to the class name. |
| const char* descriptor = dex_file_->StringByTypeIdx(idx); |
| if (descriptor[0] != 'L') { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "can't call new-instance on type '" << descriptor << "'"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckStringIndex(uint32_t idx) { |
| if (idx >= dex_file_->GetHeader().string_ids_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad string index " << idx << " (max " |
| << dex_file_->GetHeader().string_ids_size_ << ")"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckTypeIndex(uint32_t idx) { |
| if (idx >= dex_file_->GetHeader().type_ids_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad type index " << idx << " (max " |
| << dex_file_->GetHeader().type_ids_size_ << ")"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckNewArray(uint32_t idx) { |
| if (idx >= dex_file_->GetHeader().type_ids_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad type index " << idx << " (max " |
| << dex_file_->GetHeader().type_ids_size_ << ")"; |
| return false; |
| } |
| int bracket_count = 0; |
| const char* descriptor = dex_file_->StringByTypeIdx(idx); |
| const char* cp = descriptor; |
| while (*cp++ == '[') { |
| bracket_count++; |
| } |
| if (bracket_count == 0) { |
| /* The given class must be an array type. */ |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) |
| << "can't new-array class '" << descriptor << "' (not an array)"; |
| return false; |
| } else if (bracket_count > 255) { |
| /* It is illegal to create an array of more than 255 dimensions. */ |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) |
| << "can't new-array class '" << descriptor << "' (exceeds limit)"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckArrayData(uint32_t cur_offset) { |
| const uint32_t insn_count = code_item_->insns_size_in_code_units_; |
| const uint16_t* insns = code_item_->insns_ + cur_offset; |
| const uint16_t* array_data; |
| int32_t array_data_offset; |
| |
| DCHECK_LT(cur_offset, insn_count); |
| /* make sure the start of the array data table is in range */ |
| array_data_offset = insns[1] | (((int32_t) insns[2]) << 16); |
| if ((int32_t) cur_offset + array_data_offset < 0 || |
| cur_offset + array_data_offset + 2 >= insn_count) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid array data start: at " << cur_offset |
| << ", data offset " << array_data_offset |
| << ", count " << insn_count; |
| return false; |
| } |
| /* offset to array data table is a relative branch-style offset */ |
| array_data = insns + array_data_offset; |
| /* make sure the table is 32-bit aligned */ |
| if ((reinterpret_cast<uintptr_t>(array_data) & 0x03) != 0) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unaligned array data table: at " << cur_offset |
| << ", data offset " << array_data_offset; |
| return false; |
| } |
| uint32_t value_width = array_data[1]; |
| uint32_t value_count = *reinterpret_cast<const uint32_t*>(&array_data[2]); |
| uint32_t table_size = 4 + (value_width * value_count + 1) / 2; |
| /* make sure the end of the switch is in range */ |
| if (cur_offset + array_data_offset + table_size > insn_count) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid array data end: at " << cur_offset |
| << ", data offset " << array_data_offset << ", end " |
| << cur_offset + array_data_offset + table_size |
| << ", count " << insn_count; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckBranchTarget(uint32_t cur_offset) { |
| int32_t offset; |
| bool isConditional, selfOkay; |
| if (!GetBranchOffset(cur_offset, &offset, &isConditional, &selfOkay)) { |
| return false; |
| } |
| if (!selfOkay && offset == 0) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "branch offset of zero not allowed at" |
| << reinterpret_cast<void*>(cur_offset); |
| return false; |
| } |
| // Check for 32-bit overflow. This isn't strictly necessary if we can depend on the runtime |
| // to have identical "wrap-around" behavior, but it's unwise to depend on that. |
| if (((int64_t) cur_offset + (int64_t) offset) != (int64_t) (cur_offset + offset)) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "branch target overflow " |
| << reinterpret_cast<void*>(cur_offset) << " +" << offset; |
| return false; |
| } |
| const uint32_t insn_count = code_item_->insns_size_in_code_units_; |
| int32_t abs_offset = cur_offset + offset; |
| if (abs_offset < 0 || |
| (uint32_t) abs_offset >= insn_count || |
| !insn_flags_[abs_offset].IsOpcode()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid branch target " << offset << " (-> " |
| << reinterpret_cast<void*>(abs_offset) << ") at " |
| << reinterpret_cast<void*>(cur_offset); |
| return false; |
| } |
| insn_flags_[abs_offset].SetBranchTarget(); |
| return true; |
| } |
| |
| bool MethodVerifier::GetBranchOffset(uint32_t cur_offset, int32_t* pOffset, bool* pConditional, |
| bool* selfOkay) { |
| const uint16_t* insns = code_item_->insns_ + cur_offset; |
| *pConditional = false; |
| *selfOkay = false; |
| switch (*insns & 0xff) { |
| case Instruction::GOTO: |
| *pOffset = ((int16_t) *insns) >> 8; |
| break; |
| case Instruction::GOTO_32: |
| *pOffset = insns[1] | (((uint32_t) insns[2]) << 16); |
| *selfOkay = true; |
| break; |
| case Instruction::GOTO_16: |
| *pOffset = (int16_t) insns[1]; |
| break; |
| case Instruction::IF_EQ: |
| case Instruction::IF_NE: |
| case Instruction::IF_LT: |
| case Instruction::IF_GE: |
| case Instruction::IF_GT: |
| case Instruction::IF_LE: |
| case Instruction::IF_EQZ: |
| case Instruction::IF_NEZ: |
| case Instruction::IF_LTZ: |
| case Instruction::IF_GEZ: |
| case Instruction::IF_GTZ: |
| case Instruction::IF_LEZ: |
| *pOffset = (int16_t) insns[1]; |
| *pConditional = true; |
| break; |
| default: |
| return false; |
| break; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckSwitchTargets(uint32_t cur_offset) { |
| const uint32_t insn_count = code_item_->insns_size_in_code_units_; |
| DCHECK_LT(cur_offset, insn_count); |
| const uint16_t* insns = code_item_->insns_ + cur_offset; |
| /* make sure the start of the switch is in range */ |
| int32_t switch_offset = insns[1] | ((int32_t) insns[2]) << 16; |
| if ((int32_t) cur_offset + switch_offset < 0 || cur_offset + switch_offset + 2 >= insn_count) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid switch start: at " << cur_offset |
| << ", switch offset " << switch_offset |
| << ", count " << insn_count; |
| return false; |
| } |
| /* offset to switch table is a relative branch-style offset */ |
| const uint16_t* switch_insns = insns + switch_offset; |
| /* make sure the table is 32-bit aligned */ |
| if ((reinterpret_cast<uintptr_t>(switch_insns) & 0x03) != 0) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unaligned switch table: at " << cur_offset |
| << ", switch offset " << switch_offset; |
| return false; |
| } |
| uint32_t switch_count = switch_insns[1]; |
| int32_t keys_offset, targets_offset; |
| uint16_t expected_signature; |
| if ((*insns & 0xff) == Instruction::PACKED_SWITCH) { |
| /* 0=sig, 1=count, 2/3=firstKey */ |
| targets_offset = 4; |
| keys_offset = -1; |
| expected_signature = Instruction::kPackedSwitchSignature; |
| } else { |
| /* 0=sig, 1=count, 2..count*2 = keys */ |
| keys_offset = 2; |
| targets_offset = 2 + 2 * switch_count; |
| expected_signature = Instruction::kSparseSwitchSignature; |
| } |
| uint32_t table_size = targets_offset + switch_count * 2; |
| if (switch_insns[0] != expected_signature) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) |
| << StringPrintf("wrong signature for switch table (%x, wanted %x)", |
| switch_insns[0], expected_signature); |
| return false; |
| } |
| /* make sure the end of the switch is in range */ |
| if (cur_offset + switch_offset + table_size > (uint32_t) insn_count) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid switch end: at " << cur_offset |
| << ", switch offset " << switch_offset |
| << ", end " << (cur_offset + switch_offset + table_size) |
| << ", count " << insn_count; |
| return false; |
| } |
| /* for a sparse switch, verify the keys are in ascending order */ |
| if (keys_offset > 0 && switch_count > 1) { |
| int32_t last_key = switch_insns[keys_offset] | (switch_insns[keys_offset + 1] << 16); |
| for (uint32_t targ = 1; targ < switch_count; targ++) { |
| int32_t key = (int32_t) switch_insns[keys_offset + targ * 2] | |
| (int32_t) (switch_insns[keys_offset + targ * 2 + 1] << 16); |
| if (key <= last_key) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid packed switch: last key=" << last_key |
| << ", this=" << key; |
| return false; |
| } |
| last_key = key; |
| } |
| } |
| /* verify each switch target */ |
| for (uint32_t targ = 0; targ < switch_count; targ++) { |
| int32_t offset = (int32_t) switch_insns[targets_offset + targ * 2] | |
| (int32_t) (switch_insns[targets_offset + targ * 2 + 1] << 16); |
| int32_t abs_offset = cur_offset + offset; |
| if (abs_offset < 0 || |
| abs_offset >= (int32_t) insn_count || |
| !insn_flags_[abs_offset].IsOpcode()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid switch target " << offset |
| << " (-> " << reinterpret_cast<void*>(abs_offset) << ") at " |
| << reinterpret_cast<void*>(cur_offset) |
| << "[" << targ << "]"; |
| return false; |
| } |
| insn_flags_[abs_offset].SetBranchTarget(); |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CheckVarArgRegs(uint32_t vA, uint32_t arg[]) { |
| if (vA > 5) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid arg count (" << vA << ") in non-range invoke)"; |
| return false; |
| } |
| uint16_t registers_size = code_item_->registers_size_; |
| for (uint32_t idx = 0; idx < vA; idx++) { |
| if (arg[idx] >= registers_size) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid reg index (" << arg[idx] |
| << ") in non-range invoke (>= " << registers_size << ")"; |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool MethodVerifier::CheckVarArgRangeRegs(uint32_t vA, uint32_t vC) { |
| uint16_t registers_size = code_item_->registers_size_; |
| // vA/vC are unsigned 8-bit/16-bit quantities for /range instructions, so there's no risk of |
| // integer overflow when adding them here. |
| if (vA + vC > registers_size) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid reg index " << vA << "+" << vC |
| << " in range invoke (> " << registers_size << ")"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::VerifyCodeFlow() { |
| uint16_t registers_size = code_item_->registers_size_; |
| uint32_t insns_size = code_item_->insns_size_in_code_units_; |
| |
| if (registers_size * insns_size > 4*1024*1024) { |
| LOG(WARNING) << "warning: method is huge (regs=" << registers_size |
| << " insns_size=" << insns_size << ")"; |
| } |
| /* Create and initialize table holding register status */ |
| reg_table_.Init(kTrackCompilerInterestPoints, |
| insn_flags_.get(), |
| insns_size, |
| registers_size, |
| this); |
| |
| |
| work_line_.reset(RegisterLine::Create(registers_size, this)); |
| saved_line_.reset(RegisterLine::Create(registers_size, this)); |
| |
| /* Initialize register types of method arguments. */ |
| if (!SetTypesFromSignature()) { |
| DCHECK_NE(failures_.size(), 0U); |
| std::string prepend("Bad signature in "); |
| prepend += PrettyMethod(dex_method_idx_, *dex_file_); |
| PrependToLastFailMessage(prepend); |
| return false; |
| } |
| /* Perform code flow verification. */ |
| if (!CodeFlowVerifyMethod()) { |
| DCHECK_NE(failures_.size(), 0U); |
| return false; |
| } |
| return true; |
| } |
| |
| std::ostream& MethodVerifier::DumpFailures(std::ostream& os) { |
| DCHECK_EQ(failures_.size(), failure_messages_.size()); |
| for (size_t i = 0; i < failures_.size(); ++i) { |
| os << failure_messages_[i]->str() << "\n"; |
| } |
| return os; |
| } |
| |
| extern "C" void MethodVerifierGdbDump(MethodVerifier* v) |
| SHARED_LOCKS_REQUIRED(Locks::mutator_lock_) { |
| v->Dump(std::cerr); |
| } |
| |
| void MethodVerifier::Dump(std::ostream& os) { |
| if (code_item_ == NULL) { |
| os << "Native method\n"; |
| return; |
| } |
| { |
| os << "Register Types:\n"; |
| Indenter indent_filter(os.rdbuf(), kIndentChar, kIndentBy1Count); |
| std::ostream indent_os(&indent_filter); |
| reg_types_.Dump(indent_os); |
| } |
| os << "Dumping instructions and register lines:\n"; |
| Indenter indent_filter(os.rdbuf(), kIndentChar, kIndentBy1Count); |
| std::ostream indent_os(&indent_filter); |
| const Instruction* inst = Instruction::At(code_item_->insns_); |
| for (size_t dex_pc = 0; dex_pc < code_item_->insns_size_in_code_units_; |
| dex_pc += insn_flags_[dex_pc].GetLengthInCodeUnits()) { |
| RegisterLine* reg_line = reg_table_.GetLine(dex_pc); |
| if (reg_line != NULL) { |
| indent_os << reg_line->Dump() << "\n"; |
| } |
| indent_os << StringPrintf("0x%04zx", dex_pc) << ": " << insn_flags_[dex_pc].ToString() << " "; |
| const bool kDumpHexOfInstruction = false; |
| if (kDumpHexOfInstruction) { |
| indent_os << inst->DumpHex(5) << " "; |
| } |
| indent_os << inst->DumpString(dex_file_) << "\n"; |
| inst = inst->Next(); |
| } |
| } |
| |
| static bool IsPrimitiveDescriptor(char descriptor) { |
| switch (descriptor) { |
| case 'I': |
| case 'C': |
| case 'S': |
| case 'B': |
| case 'Z': |
| case 'F': |
| case 'D': |
| case 'J': |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| bool MethodVerifier::SetTypesFromSignature() { |
| RegisterLine* reg_line = reg_table_.GetLine(0); |
| int arg_start = code_item_->registers_size_ - code_item_->ins_size_; |
| size_t expected_args = code_item_->ins_size_; /* long/double count as two */ |
| |
| DCHECK_GE(arg_start, 0); /* should have been verified earlier */ |
| // Include the "this" pointer. |
| size_t cur_arg = 0; |
| if (!IsStatic()) { |
| // If this is a constructor for a class other than java.lang.Object, mark the first ("this") |
| // argument as uninitialized. This restricts field access until the superclass constructor is |
| // called. |
| const RegType& declaring_class = GetDeclaringClass(); |
| if (IsConstructor() && !declaring_class.IsJavaLangObject()) { |
| reg_line->SetRegisterType(arg_start + cur_arg, |
| reg_types_.UninitializedThisArgument(declaring_class)); |
| } else { |
| reg_line->SetRegisterType(arg_start + cur_arg, declaring_class); |
| } |
| cur_arg++; |
| } |
| |
| const DexFile::ProtoId& proto_id = |
| dex_file_->GetMethodPrototype(dex_file_->GetMethodId(dex_method_idx_)); |
| DexFileParameterIterator iterator(*dex_file_, proto_id); |
| |
| for (; iterator.HasNext(); iterator.Next()) { |
| const char* descriptor = iterator.GetDescriptor(); |
| if (descriptor == NULL) { |
| LOG(FATAL) << "Null descriptor"; |
| } |
| if (cur_arg >= expected_args) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "expected " << expected_args |
| << " args, found more (" << descriptor << ")"; |
| return false; |
| } |
| switch (descriptor[0]) { |
| case 'L': |
| case '[': |
| // We assume that reference arguments are initialized. The only way it could be otherwise |
| // (assuming the caller was verified) is if the current method is <init>, but in that case |
| // it's effectively considered initialized the instant we reach here (in the sense that we |
| // can return without doing anything or call virtual methods). |
| { |
| const RegType& reg_type = reg_types_.FromDescriptor(class_loader_->get(), descriptor, |
| false); |
| reg_line->SetRegisterType(arg_start + cur_arg, reg_type); |
| } |
| break; |
| case 'Z': |
| reg_line->SetRegisterType(arg_start + cur_arg, reg_types_.Boolean()); |
| break; |
| case 'C': |
| reg_line->SetRegisterType(arg_start + cur_arg, reg_types_.Char()); |
| break; |
| case 'B': |
| reg_line->SetRegisterType(arg_start + cur_arg, reg_types_.Byte()); |
| break; |
| case 'I': |
| reg_line->SetRegisterType(arg_start + cur_arg, reg_types_.Integer()); |
| break; |
| case 'S': |
| reg_line->SetRegisterType(arg_start + cur_arg, reg_types_.Short()); |
| break; |
| case 'F': |
| reg_line->SetRegisterType(arg_start + cur_arg, reg_types_.Float()); |
| break; |
| case 'J': |
| case 'D': { |
| const RegType& lo_half = descriptor[0] == 'J' ? reg_types_.LongLo() : reg_types_.DoubleLo(); |
| const RegType& hi_half = descriptor[0] == 'J' ? reg_types_.LongHi() : reg_types_.DoubleHi(); |
| reg_line->SetRegisterTypeWide(arg_start + cur_arg, lo_half, hi_half); |
| cur_arg++; |
| break; |
| } |
| default: |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unexpected signature type char '" |
| << descriptor << "'"; |
| return false; |
| } |
| cur_arg++; |
| } |
| if (cur_arg != expected_args) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "expected " << expected_args |
| << " arguments, found " << cur_arg; |
| return false; |
| } |
| const char* descriptor = dex_file_->GetReturnTypeDescriptor(proto_id); |
| // Validate return type. We don't do the type lookup; just want to make sure that it has the right |
| // format. Only major difference from the method argument format is that 'V' is supported. |
| bool result; |
| if (IsPrimitiveDescriptor(descriptor[0]) || descriptor[0] == 'V') { |
| result = descriptor[1] == '\0'; |
| } else if (descriptor[0] == '[') { // single/multi-dimensional array of object/primitive |
| size_t i = 0; |
| do { |
| i++; |
| } while (descriptor[i] == '['); // process leading [ |
| if (descriptor[i] == 'L') { // object array |
| do { |
| i++; // find closing ; |
| } while (descriptor[i] != ';' && descriptor[i] != '\0'); |
| result = descriptor[i] == ';'; |
| } else { // primitive array |
| result = IsPrimitiveDescriptor(descriptor[i]) && descriptor[i + 1] == '\0'; |
| } |
| } else if (descriptor[0] == 'L') { |
| // could be more thorough here, but shouldn't be required |
| size_t i = 0; |
| do { |
| i++; |
| } while (descriptor[i] != ';' && descriptor[i] != '\0'); |
| result = descriptor[i] == ';'; |
| } else { |
| result = false; |
| } |
| if (!result) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unexpected char in return type descriptor '" |
| << descriptor << "'"; |
| } |
| return result; |
| } |
| |
| bool MethodVerifier::CodeFlowVerifyMethod() { |
| const uint16_t* insns = code_item_->insns_; |
| const uint32_t insns_size = code_item_->insns_size_in_code_units_; |
| |
| /* Begin by marking the first instruction as "changed". */ |
| insn_flags_[0].SetChanged(); |
| uint32_t start_guess = 0; |
| |
| /* Continue until no instructions are marked "changed". */ |
| while (true) { |
| // Find the first marked one. Use "start_guess" as a way to find one quickly. |
| uint32_t insn_idx = start_guess; |
| for (; insn_idx < insns_size; insn_idx++) { |
| if (insn_flags_[insn_idx].IsChanged()) |
| break; |
| } |
| if (insn_idx == insns_size) { |
| if (start_guess != 0) { |
| /* try again, starting from the top */ |
| start_guess = 0; |
| continue; |
| } else { |
| /* all flags are clear */ |
| break; |
| } |
| } |
| // We carry the working set of registers from instruction to instruction. If this address can |
| // be the target of a branch (or throw) instruction, or if we're skipping around chasing |
| // "changed" flags, we need to load the set of registers from the table. |
| // Because we always prefer to continue on to the next instruction, we should never have a |
| // situation where we have a stray "changed" flag set on an instruction that isn't a branch |
| // target. |
| work_insn_idx_ = insn_idx; |
| if (insn_flags_[insn_idx].IsBranchTarget()) { |
| work_line_->CopyFromLine(reg_table_.GetLine(insn_idx)); |
| } else { |
| #ifndef NDEBUG |
| /* |
| * Sanity check: retrieve the stored register line (assuming |
| * a full table) and make sure it actually matches. |
| */ |
| RegisterLine* register_line = reg_table_.GetLine(insn_idx); |
| if (register_line != NULL) { |
| if (work_line_->CompareLine(register_line) != 0) { |
| Dump(std::cout); |
| std::cout << info_messages_.str(); |
| LOG(FATAL) << "work_line diverged in " << PrettyMethod(dex_method_idx_, *dex_file_) |
| << "@" << reinterpret_cast<void*>(work_insn_idx_) << "\n" |
| << " work_line=" << *work_line_ << "\n" |
| << " expected=" << *register_line; |
| } |
| } |
| #endif |
| } |
| if (!CodeFlowVerifyInstruction(&start_guess)) { |
| std::string prepend(PrettyMethod(dex_method_idx_, *dex_file_)); |
| prepend += " failed to verify: "; |
| PrependToLastFailMessage(prepend); |
| return false; |
| } |
| /* Clear "changed" and mark as visited. */ |
| insn_flags_[insn_idx].SetVisited(); |
| insn_flags_[insn_idx].ClearChanged(); |
| } |
| |
| if (gDebugVerify) { |
| /* |
| * Scan for dead code. There's nothing "evil" about dead code |
| * (besides the wasted space), but it indicates a flaw somewhere |
| * down the line, possibly in the verifier. |
| * |
| * If we've substituted "always throw" instructions into the stream, |
| * we are almost certainly going to have some dead code. |
| */ |
| int dead_start = -1; |
| uint32_t insn_idx = 0; |
| for (; insn_idx < insns_size; insn_idx += insn_flags_[insn_idx].GetLengthInCodeUnits()) { |
| /* |
| * Switch-statement data doesn't get "visited" by scanner. It |
| * may or may not be preceded by a padding NOP (for alignment). |
| */ |
| if (insns[insn_idx] == Instruction::kPackedSwitchSignature || |
| insns[insn_idx] == Instruction::kSparseSwitchSignature || |
| insns[insn_idx] == Instruction::kArrayDataSignature || |
| (insns[insn_idx] == Instruction::NOP && (insn_idx + 1 < insns_size) && |
| (insns[insn_idx + 1] == Instruction::kPackedSwitchSignature || |
| insns[insn_idx + 1] == Instruction::kSparseSwitchSignature || |
| insns[insn_idx + 1] == Instruction::kArrayDataSignature))) { |
| insn_flags_[insn_idx].SetVisited(); |
| } |
| |
| if (!insn_flags_[insn_idx].IsVisited()) { |
| if (dead_start < 0) |
| dead_start = insn_idx; |
| } else if (dead_start >= 0) { |
| LogVerifyInfo() << "dead code " << reinterpret_cast<void*>(dead_start) |
| << "-" << reinterpret_cast<void*>(insn_idx - 1); |
| dead_start = -1; |
| } |
| } |
| if (dead_start >= 0) { |
| LogVerifyInfo() << "dead code " << reinterpret_cast<void*>(dead_start) |
| << "-" << reinterpret_cast<void*>(insn_idx - 1); |
| } |
| // To dump the state of the verify after a method, do something like: |
| // if (PrettyMethod(dex_method_idx_, *dex_file_) == |
| // "boolean java.lang.String.equals(java.lang.Object)") { |
| // LOG(INFO) << info_messages_.str(); |
| // } |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::CodeFlowVerifyInstruction(uint32_t* start_guess) { |
| // If we're doing FindLocksAtDexPc, check whether we're at the dex pc we care about. |
| // We want the state _before_ the instruction, for the case where the dex pc we're |
| // interested in is itself a monitor-enter instruction (which is a likely place |
| // for a thread to be suspended). |
| if (monitor_enter_dex_pcs_ != NULL && work_insn_idx_ == interesting_dex_pc_) { |
| monitor_enter_dex_pcs_->clear(); // The new work line is more accurate than the previous one. |
| for (size_t i = 0; i < work_line_->GetMonitorEnterCount(); ++i) { |
| monitor_enter_dex_pcs_->push_back(work_line_->GetMonitorEnterDexPc(i)); |
| } |
| } |
| |
| /* |
| * Once we finish decoding the instruction, we need to figure out where |
| * we can go from here. There are three possible ways to transfer |
| * control to another statement: |
| * |
| * (1) Continue to the next instruction. Applies to all but |
| * unconditional branches, method returns, and exception throws. |
| * (2) Branch to one or more possible locations. Applies to branches |
| * and switch statements. |
| * (3) Exception handlers. Applies to any instruction that can |
| * throw an exception that is handled by an encompassing "try" |
| * block. |
| * |
| * We can also return, in which case there is no successor instruction |
| * from this point. |
| * |
| * The behavior can be determined from the opcode flags. |
| */ |
| const uint16_t* insns = code_item_->insns_ + work_insn_idx_; |
| const Instruction* inst = Instruction::At(insns); |
| int opcode_flags = Instruction::FlagsOf(inst->Opcode()); |
| |
| int32_t branch_target = 0; |
| bool just_set_result = false; |
| if (gDebugVerify) { |
| // Generate processing back trace to debug verifier |
| LogVerifyInfo() << "Processing " << inst->DumpString(dex_file_) << "\n" |
| << *work_line_.get() << "\n"; |
| } |
| |
| /* |
| * Make a copy of the previous register state. If the instruction |
| * can throw an exception, we will copy/merge this into the "catch" |
| * address rather than work_line, because we don't want the result |
| * from the "successful" code path (e.g. a check-cast that "improves" |
| * a type) to be visible to the exception handler. |
| */ |
| if ((opcode_flags & Instruction::kThrow) != 0 && CurrentInsnFlags()->IsInTry()) { |
| saved_line_->CopyFromLine(work_line_.get()); |
| } else { |
| #ifndef NDEBUG |
| saved_line_->FillWithGarbage(); |
| #endif |
| } |
| |
| |
| // We need to ensure the work line is consistent while performing validation. When we spot a |
| // peephole pattern we compute a new line for either the fallthrough instruction or the |
| // branch target. |
| UniquePtr<RegisterLine> branch_line; |
| UniquePtr<RegisterLine> fallthrough_line; |
| |
| // We need precise constant types only for deoptimization which happens at runtime. |
| const bool need_precise_constant = !Runtime::Current()->IsCompiler(); |
| |
| switch (inst->Opcode()) { |
| case Instruction::NOP: |
| /* |
| * A "pure" NOP has no effect on anything. Data tables start with |
| * a signature that looks like a NOP; if we see one of these in |
| * the course of executing code then we have a problem. |
| */ |
| if (inst->VRegA_10x() != 0) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "encountered data table in instruction stream"; |
| } |
| break; |
| |
| case Instruction::MOVE: |
| work_line_->CopyRegister1(inst->VRegA_12x(), inst->VRegB_12x(), kTypeCategory1nr); |
| break; |
| case Instruction::MOVE_FROM16: |
| work_line_->CopyRegister1(inst->VRegA_22x(), inst->VRegB_22x(), kTypeCategory1nr); |
| break; |
| case Instruction::MOVE_16: |
| work_line_->CopyRegister1(inst->VRegA_32x(), inst->VRegB_32x(), kTypeCategory1nr); |
| break; |
| case Instruction::MOVE_WIDE: |
| work_line_->CopyRegister2(inst->VRegA_12x(), inst->VRegB_12x()); |
| break; |
| case Instruction::MOVE_WIDE_FROM16: |
| work_line_->CopyRegister2(inst->VRegA_22x(), inst->VRegB_22x()); |
| break; |
| case Instruction::MOVE_WIDE_16: |
| work_line_->CopyRegister2(inst->VRegA_32x(), inst->VRegB_32x()); |
| break; |
| case Instruction::MOVE_OBJECT: |
| work_line_->CopyRegister1(inst->VRegA_12x(), inst->VRegB_12x(), kTypeCategoryRef); |
| break; |
| case Instruction::MOVE_OBJECT_FROM16: |
| work_line_->CopyRegister1(inst->VRegA_22x(), inst->VRegB_22x(), kTypeCategoryRef); |
| break; |
| case Instruction::MOVE_OBJECT_16: |
| work_line_->CopyRegister1(inst->VRegA_32x(), inst->VRegB_32x(), kTypeCategoryRef); |
| break; |
| |
| /* |
| * The move-result instructions copy data out of a "pseudo-register" |
| * with the results from the last method invocation. In practice we |
| * might want to hold the result in an actual CPU register, so the |
| * Dalvik spec requires that these only appear immediately after an |
| * invoke or filled-new-array. |
| * |
| * These calls invalidate the "result" register. (This is now |
| * redundant with the reset done below, but it can make the debug info |
| * easier to read in some cases.) |
| */ |
| case Instruction::MOVE_RESULT: |
| work_line_->CopyResultRegister1(inst->VRegA_11x(), false); |
| break; |
| case Instruction::MOVE_RESULT_WIDE: |
| work_line_->CopyResultRegister2(inst->VRegA_11x()); |
| break; |
| case Instruction::MOVE_RESULT_OBJECT: |
| work_line_->CopyResultRegister1(inst->VRegA_11x(), true); |
| break; |
| |
| case Instruction::MOVE_EXCEPTION: { |
| /* |
| * This statement can only appear as the first instruction in an exception handler. We verify |
| * that as part of extracting the exception type from the catch block list. |
| */ |
| const RegType& res_type = GetCaughtExceptionType(); |
| work_line_->SetRegisterType(inst->VRegA_11x(), res_type); |
| break; |
| } |
| case Instruction::RETURN_VOID: |
| if (!IsConstructor() || work_line_->CheckConstructorReturn()) { |
| if (!GetMethodReturnType().IsConflict()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "return-void not expected"; |
| } |
| } |
| break; |
| case Instruction::RETURN: |
| if (!IsConstructor() || work_line_->CheckConstructorReturn()) { |
| /* check the method signature */ |
| const RegType& return_type = GetMethodReturnType(); |
| if (!return_type.IsCategory1Types()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unexpected non-category 1 return type " |
| << return_type; |
| } else { |
| // Compilers may generate synthetic functions that write byte values into boolean fields. |
| // Also, it may use integer values for boolean, byte, short, and character return types. |
| const uint32_t vregA = inst->VRegA_11x(); |
| const RegType& src_type = work_line_->GetRegisterType(vregA); |
| bool use_src = ((return_type.IsBoolean() && src_type.IsByte()) || |
| ((return_type.IsBoolean() || return_type.IsByte() || |
| return_type.IsShort() || return_type.IsChar()) && |
| src_type.IsInteger())); |
| /* check the register contents */ |
| bool success = |
| work_line_->VerifyRegisterType(vregA, use_src ? src_type : return_type); |
| if (!success) { |
| AppendToLastFailMessage(StringPrintf(" return-1nr on invalid register v%d", vregA)); |
| } |
| } |
| } |
| break; |
| case Instruction::RETURN_WIDE: |
| if (!IsConstructor() || work_line_->CheckConstructorReturn()) { |
| /* check the method signature */ |
| const RegType& return_type = GetMethodReturnType(); |
| if (!return_type.IsCategory2Types()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "return-wide not expected"; |
| } else { |
| /* check the register contents */ |
| const uint32_t vregA = inst->VRegA_11x(); |
| bool success = work_line_->VerifyRegisterType(vregA, return_type); |
| if (!success) { |
| AppendToLastFailMessage(StringPrintf(" return-wide on invalid register v%d", vregA)); |
| } |
| } |
| } |
| break; |
| case Instruction::RETURN_OBJECT: |
| if (!IsConstructor() || work_line_->CheckConstructorReturn()) { |
| const RegType& return_type = GetMethodReturnType(); |
| if (!return_type.IsReferenceTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "return-object not expected"; |
| } else { |
| /* return_type is the *expected* return type, not register value */ |
| DCHECK(!return_type.IsZero()); |
| DCHECK(!return_type.IsUninitializedReference()); |
| const uint32_t vregA = inst->VRegA_11x(); |
| const RegType& reg_type = work_line_->GetRegisterType(vregA); |
| // Disallow returning uninitialized values and verify that the reference in vAA is an |
| // instance of the "return_type" |
| if (reg_type.IsUninitializedTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "returning uninitialized object '" |
| << reg_type << "'"; |
| } else if (!return_type.IsAssignableFrom(reg_type)) { |
| if (reg_type.IsUnresolvedTypes() || return_type.IsUnresolvedTypes()) { |
| Fail(VERIFY_ERROR_NO_CLASS) << " can't resolve returned type '" << return_type |
| << "' or '" << reg_type << "'"; |
| } else { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "returning '" << reg_type |
| << "', but expected from declaration '" << return_type << "'"; |
| } |
| } |
| } |
| } |
| break; |
| |
| /* could be boolean, int, float, or a null reference */ |
| case Instruction::CONST_4: { |
| int32_t val = static_cast<int32_t>(inst->VRegB_11n() << 28) >> 28; |
| work_line_->SetRegisterType(inst->VRegA_11n(), |
| DetermineCat1Constant(val, need_precise_constant)); |
| break; |
| } |
| case Instruction::CONST_16: { |
| int16_t val = static_cast<int16_t>(inst->VRegB_21s()); |
| work_line_->SetRegisterType(inst->VRegA_21s(), |
| DetermineCat1Constant(val, need_precise_constant)); |
| break; |
| } |
| case Instruction::CONST: { |
| int32_t val = inst->VRegB_31i(); |
| work_line_->SetRegisterType(inst->VRegA_31i(), |
| DetermineCat1Constant(val, need_precise_constant)); |
| break; |
| } |
| case Instruction::CONST_HIGH16: { |
| int32_t val = static_cast<int32_t>(inst->VRegB_21h() << 16); |
| work_line_->SetRegisterType(inst->VRegA_21h(), |
| DetermineCat1Constant(val, need_precise_constant)); |
| break; |
| } |
| /* could be long or double; resolved upon use */ |
| case Instruction::CONST_WIDE_16: { |
| int64_t val = static_cast<int16_t>(inst->VRegB_21s()); |
| const RegType& lo = reg_types_.FromCat2ConstLo(static_cast<int32_t>(val), true); |
| const RegType& hi = reg_types_.FromCat2ConstHi(static_cast<int32_t>(val >> 32), true); |
| work_line_->SetRegisterTypeWide(inst->VRegA_21s(), lo, hi); |
| break; |
| } |
| case Instruction::CONST_WIDE_32: { |
| int64_t val = static_cast<int32_t>(inst->VRegB_31i()); |
| const RegType& lo = reg_types_.FromCat2ConstLo(static_cast<int32_t>(val), true); |
| const RegType& hi = reg_types_.FromCat2ConstHi(static_cast<int32_t>(val >> 32), true); |
| work_line_->SetRegisterTypeWide(inst->VRegA_31i(), lo, hi); |
| break; |
| } |
| case Instruction::CONST_WIDE: { |
| int64_t val = inst->VRegB_51l(); |
| const RegType& lo = reg_types_.FromCat2ConstLo(static_cast<int32_t>(val), true); |
| const RegType& hi = reg_types_.FromCat2ConstHi(static_cast<int32_t>(val >> 32), true); |
| work_line_->SetRegisterTypeWide(inst->VRegA_51l(), lo, hi); |
| break; |
| } |
| case Instruction::CONST_WIDE_HIGH16: { |
| int64_t val = static_cast<uint64_t>(inst->VRegB_21h()) << 48; |
| const RegType& lo = reg_types_.FromCat2ConstLo(static_cast<int32_t>(val), true); |
| const RegType& hi = reg_types_.FromCat2ConstHi(static_cast<int32_t>(val >> 32), true); |
| work_line_->SetRegisterTypeWide(inst->VRegA_21h(), lo, hi); |
| break; |
| } |
| case Instruction::CONST_STRING: |
| work_line_->SetRegisterType(inst->VRegA_21c(), reg_types_.JavaLangString()); |
| break; |
| case Instruction::CONST_STRING_JUMBO: |
| work_line_->SetRegisterType(inst->VRegA_31c(), reg_types_.JavaLangString()); |
| break; |
| case Instruction::CONST_CLASS: { |
| // Get type from instruction if unresolved then we need an access check |
| // TODO: check Compiler::CanAccessTypeWithoutChecks returns false when res_type is unresolved |
| const RegType& res_type = ResolveClassAndCheckAccess(inst->VRegB_21c()); |
| // Register holds class, ie its type is class, on error it will hold Conflict. |
| work_line_->SetRegisterType(inst->VRegA_21c(), |
| res_type.IsConflict() ? res_type |
| : reg_types_.JavaLangClass(true)); |
| break; |
| } |
| case Instruction::MONITOR_ENTER: |
| work_line_->PushMonitor(inst->VRegA_11x(), work_insn_idx_); |
| break; |
| case Instruction::MONITOR_EXIT: |
| /* |
| * monitor-exit instructions are odd. They can throw exceptions, |
| * but when they do they act as if they succeeded and the PC is |
| * pointing to the following instruction. (This behavior goes back |
| * to the need to handle asynchronous exceptions, a now-deprecated |
| * feature that Dalvik doesn't support.) |
| * |
| * In practice we don't need to worry about this. The only |
| * exceptions that can be thrown from monitor-exit are for a |
| * null reference and -exit without a matching -enter. If the |
| * structured locking checks are working, the former would have |
| * failed on the -enter instruction, and the latter is impossible. |
| * |
| * This is fortunate, because issue 3221411 prevents us from |
| * chasing the "can throw" path when monitor verification is |
| * enabled. If we can fully verify the locking we can ignore |
| * some catch blocks (which will show up as "dead" code when |
| * we skip them here); if we can't, then the code path could be |
| * "live" so we still need to check it. |
| */ |
| opcode_flags &= ~Instruction::kThrow; |
| work_line_->PopMonitor(inst->VRegA_11x()); |
| break; |
| |
| case Instruction::CHECK_CAST: |
| case Instruction::INSTANCE_OF: { |
| /* |
| * If this instruction succeeds, we will "downcast" register vA to the type in vB. (This |
| * could be a "upcast" -- not expected, so we don't try to address it.) |
| * |
| * If it fails, an exception is thrown, which we deal with later by ignoring the update to |
| * dec_insn.vA when branching to a handler. |
| */ |
| const bool is_checkcast = (inst->Opcode() == Instruction::CHECK_CAST); |
| const uint32_t type_idx = (is_checkcast) ? inst->VRegB_21c() : inst->VRegC_22c(); |
| const RegType& res_type = ResolveClassAndCheckAccess(type_idx); |
| if (res_type.IsConflict()) { |
| DCHECK_NE(failures_.size(), 0U); |
| if (!is_checkcast) { |
| work_line_->SetRegisterType(inst->VRegA_22c(), reg_types_.Boolean()); |
| } |
| break; // bad class |
| } |
| // TODO: check Compiler::CanAccessTypeWithoutChecks returns false when res_type is unresolved |
| uint32_t orig_type_reg = (is_checkcast) ? inst->VRegA_21c() : inst->VRegB_22c(); |
| const RegType& orig_type = work_line_->GetRegisterType(orig_type_reg); |
| if (!res_type.IsNonZeroReferenceTypes()) { |
| if (is_checkcast) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "check-cast on unexpected class " << res_type; |
| } else { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "instance-of on unexpected class " << res_type; |
| } |
| } else if (!orig_type.IsReferenceTypes()) { |
| if (is_checkcast) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "check-cast on non-reference in v" << orig_type_reg; |
| } else { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "instance-of on non-reference in v" << orig_type_reg; |
| } |
| } else { |
| if (is_checkcast) { |
| work_line_->SetRegisterType(inst->VRegA_21c(), res_type); |
| } else { |
| work_line_->SetRegisterType(inst->VRegA_22c(), reg_types_.Boolean()); |
| } |
| } |
| break; |
| } |
| case Instruction::ARRAY_LENGTH: { |
| const RegType& res_type = work_line_->GetRegisterType(inst->VRegB_12x()); |
| if (res_type.IsReferenceTypes()) { |
| if (!res_type.IsArrayTypes() && !res_type.IsZero()) { // ie not an array or null |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "array-length on non-array " << res_type; |
| } else { |
| work_line_->SetRegisterType(inst->VRegA_12x(), reg_types_.Integer()); |
| } |
| } |
| break; |
| } |
| case Instruction::NEW_INSTANCE: { |
| const RegType& res_type = ResolveClassAndCheckAccess(inst->VRegB_21c()); |
| if (res_type.IsConflict()) { |
| DCHECK_NE(failures_.size(), 0U); |
| break; // bad class |
| } |
| // TODO: check Compiler::CanAccessTypeWithoutChecks returns false when res_type is unresolved |
| // can't create an instance of an interface or abstract class */ |
| if (!res_type.IsInstantiableTypes()) { |
| Fail(VERIFY_ERROR_INSTANTIATION) |
| << "new-instance on primitive, interface or abstract class" << res_type; |
| // Soft failure so carry on to set register type. |
| } |
| const RegType& uninit_type = reg_types_.Uninitialized(res_type, work_insn_idx_); |
| // Any registers holding previous allocations from this address that have not yet been |
| // initialized must be marked invalid. |
| work_line_->MarkUninitRefsAsInvalid(uninit_type); |
| // add the new uninitialized reference to the register state |
| work_line_->SetRegisterType(inst->VRegA_21c(), uninit_type); |
| break; |
| } |
| case Instruction::NEW_ARRAY: |
| VerifyNewArray(inst, false, false); |
| break; |
| case Instruction::FILLED_NEW_ARRAY: |
| VerifyNewArray(inst, true, false); |
| just_set_result = true; // Filled new array sets result register |
| break; |
| case Instruction::FILLED_NEW_ARRAY_RANGE: |
| VerifyNewArray(inst, true, true); |
| just_set_result = true; // Filled new array range sets result register |
| break; |
| case Instruction::CMPL_FLOAT: |
| case Instruction::CMPG_FLOAT: |
| if (!work_line_->VerifyRegisterType(inst->VRegB_23x(), reg_types_.Float())) { |
| break; |
| } |
| if (!work_line_->VerifyRegisterType(inst->VRegC_23x(), reg_types_.Float())) { |
| break; |
| } |
| work_line_->SetRegisterType(inst->VRegA_23x(), reg_types_.Integer()); |
| break; |
| case Instruction::CMPL_DOUBLE: |
| case Instruction::CMPG_DOUBLE: |
| if (!work_line_->VerifyRegisterTypeWide(inst->VRegB_23x(), reg_types_.DoubleLo(), |
| reg_types_.DoubleHi())) { |
| break; |
| } |
| if (!work_line_->VerifyRegisterTypeWide(inst->VRegC_23x(), reg_types_.DoubleLo(), |
| reg_types_.DoubleHi())) { |
| break; |
| } |
| work_line_->SetRegisterType(inst->VRegA_23x(), reg_types_.Integer()); |
| break; |
| case Instruction::CMP_LONG: |
| if (!work_line_->VerifyRegisterTypeWide(inst->VRegB_23x(), reg_types_.LongLo(), |
| reg_types_.LongHi())) { |
| break; |
| } |
| if (!work_line_->VerifyRegisterTypeWide(inst->VRegC_23x(), reg_types_.LongLo(), |
| reg_types_.LongHi())) { |
| break; |
| } |
| work_line_->SetRegisterType(inst->VRegA_23x(), reg_types_.Integer()); |
| break; |
| case Instruction::THROW: { |
| const RegType& res_type = work_line_->GetRegisterType(inst->VRegA_11x()); |
| if (!reg_types_.JavaLangThrowable(false).IsAssignableFrom(res_type)) { |
| Fail(res_type.IsUnresolvedTypes() ? VERIFY_ERROR_NO_CLASS : VERIFY_ERROR_BAD_CLASS_SOFT) |
| << "thrown class " << res_type << " not instanceof Throwable"; |
| } |
| break; |
| } |
| case Instruction::GOTO: |
| case Instruction::GOTO_16: |
| case Instruction::GOTO_32: |
| /* no effect on or use of registers */ |
| break; |
| |
| case Instruction::PACKED_SWITCH: |
| case Instruction::SPARSE_SWITCH: |
| /* verify that vAA is an integer, or can be converted to one */ |
| work_line_->VerifyRegisterType(inst->VRegA_31t(), reg_types_.Integer()); |
| break; |
| |
| case Instruction::FILL_ARRAY_DATA: { |
| /* Similar to the verification done for APUT */ |
| const RegType& array_type = work_line_->GetRegisterType(inst->VRegA_31t()); |
| /* array_type can be null if the reg type is Zero */ |
| if (!array_type.IsZero()) { |
| if (!array_type.IsArrayTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid fill-array-data with array type " |
| << array_type; |
| } else { |
| const RegType& component_type = reg_types_.GetComponentType(array_type, |
| class_loader_->get()); |
| DCHECK(!component_type.IsConflict()); |
| if (component_type.IsNonZeroReferenceTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid fill-array-data with component type " |
| << component_type; |
| } else { |
| // Now verify if the element width in the table matches the element width declared in |
| // the array |
| const uint16_t* array_data = insns + (insns[1] | (((int32_t) insns[2]) << 16)); |
| if (array_data[0] != Instruction::kArrayDataSignature) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid magic for array-data"; |
| } else { |
| size_t elem_width = Primitive::ComponentSize(component_type.GetPrimitiveType()); |
| // Since we don't compress the data in Dex, expect to see equal width of data stored |
| // in the table and expected from the array class. |
| if (array_data[1] != elem_width) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "array-data size mismatch (" << array_data[1] |
| << " vs " << elem_width << ")"; |
| } |
| } |
| } |
| } |
| } |
| break; |
| } |
| case Instruction::IF_EQ: |
| case Instruction::IF_NE: { |
| const RegType& reg_type1 = work_line_->GetRegisterType(inst->VRegA_22t()); |
| const RegType& reg_type2 = work_line_->GetRegisterType(inst->VRegB_22t()); |
| bool mismatch = false; |
| if (reg_type1.IsZero()) { // zero then integral or reference expected |
| mismatch = !reg_type2.IsReferenceTypes() && !reg_type2.IsIntegralTypes(); |
| } else if (reg_type1.IsReferenceTypes()) { // both references? |
| mismatch = !reg_type2.IsReferenceTypes(); |
| } else { // both integral? |
| mismatch = !reg_type1.IsIntegralTypes() || !reg_type2.IsIntegralTypes(); |
| } |
| if (mismatch) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "args to if-eq/if-ne (" << reg_type1 << "," |
| << reg_type2 << ") must both be references or integral"; |
| } |
| break; |
| } |
| case Instruction::IF_LT: |
| case Instruction::IF_GE: |
| case Instruction::IF_GT: |
| case Instruction::IF_LE: { |
| const RegType& reg_type1 = work_line_->GetRegisterType(inst->VRegA_22t()); |
| const RegType& reg_type2 = work_line_->GetRegisterType(inst->VRegB_22t()); |
| if (!reg_type1.IsIntegralTypes() || !reg_type2.IsIntegralTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "args to 'if' (" << reg_type1 << "," |
| << reg_type2 << ") must be integral"; |
| } |
| break; |
| } |
| case Instruction::IF_EQZ: |
| case Instruction::IF_NEZ: { |
| const RegType& reg_type = work_line_->GetRegisterType(inst->VRegA_21t()); |
| if (!reg_type.IsReferenceTypes() && !reg_type.IsIntegralTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "type " << reg_type |
| << " unexpected as arg to if-eqz/if-nez"; |
| } |
| |
| // Find previous instruction - its existence is a precondition to peephole optimization. |
| uint32_t instance_of_idx = 0; |
| if (0 != work_insn_idx_) { |
| instance_of_idx = work_insn_idx_ - 1; |
| while (0 != instance_of_idx && !insn_flags_[instance_of_idx].IsOpcode()) { |
| instance_of_idx--; |
| } |
| CHECK(insn_flags_[instance_of_idx].IsOpcode()); |
| } else { |
| break; |
| } |
| |
| const Instruction* instance_of_inst = Instruction::At(code_item_->insns_ + instance_of_idx); |
| |
| /* Check for peep-hole pattern of: |
| * ...; |
| * instance-of vX, vY, T; |
| * ifXXX vX, label ; |
| * ...; |
| * label: |
| * ...; |
| * and sharpen the type of vY to be type T. |
| * Note, this pattern can't be if: |
| * - if there are other branches to this branch, |
| * - when vX == vY. |
| */ |
| if (!CurrentInsnFlags()->IsBranchTarget() && |
| (Instruction::INSTANCE_OF == instance_of_inst->Opcode()) && |
| (inst->VRegA_21t() == instance_of_inst->VRegA_22c()) && |
| (instance_of_inst->VRegA_22c() != instance_of_inst->VRegB_22c())) { |
| // Check that the we are not attempting conversion to interface types, |
| // which is not done because of the multiple inheritance implications. |
| // Also don't change the type if it would result in an upcast. |
| const RegType& orig_type = work_line_->GetRegisterType(instance_of_inst->VRegB_22c()); |
| const RegType& cast_type = ResolveClassAndCheckAccess(instance_of_inst->VRegC_22c()); |
| |
| if (!cast_type.IsUnresolvedTypes() && !orig_type.IsUnresolvedTypes() && |
| !cast_type.GetClass()->IsInterface() && !cast_type.IsAssignableFrom(orig_type)) { |
| RegisterLine* update_line = RegisterLine::Create(code_item_->registers_size_, this); |
| if (inst->Opcode() == Instruction::IF_EQZ) { |
| fallthrough_line.reset(update_line); |
| } else { |
| branch_line.reset(update_line); |
| } |
| update_line->CopyFromLine(work_line_.get()); |
| update_line->SetRegisterType(instance_of_inst->VRegB_22c(), cast_type); |
| if (!insn_flags_[instance_of_idx].IsBranchTarget() && 0 != instance_of_idx) { |
| // See if instance-of was preceded by a move-object operation, common due to the small |
| // register encoding space of instance-of, and propagate type information to the source |
| // of the move-object. |
| uint32_t move_idx = instance_of_idx - 1; |
| while (0 != move_idx && !insn_flags_[move_idx].IsOpcode()) { |
| move_idx--; |
| } |
| CHECK(insn_flags_[move_idx].IsOpcode()); |
| const Instruction* move_inst = Instruction::At(code_item_->insns_ + move_idx); |
| switch (move_inst->Opcode()) { |
| case Instruction::MOVE_OBJECT: |
| if (move_inst->VRegA_12x() == instance_of_inst->VRegB_22c()) { |
| update_line->SetRegisterType(move_inst->VRegB_12x(), cast_type); |
| } |
| break; |
| case Instruction::MOVE_OBJECT_FROM16: |
| if (move_inst->VRegA_22x() == instance_of_inst->VRegB_22c()) { |
| update_line->SetRegisterType(move_inst->VRegB_22x(), cast_type); |
| } |
| break; |
| case Instruction::MOVE_OBJECT_16: |
| if (move_inst->VRegA_32x() == instance_of_inst->VRegB_22c()) { |
| update_line->SetRegisterType(move_inst->VRegB_32x(), cast_type); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| } |
| |
| break; |
| } |
| case Instruction::IF_LTZ: |
| case Instruction::IF_GEZ: |
| case Instruction::IF_GTZ: |
| case Instruction::IF_LEZ: { |
| const RegType& reg_type = work_line_->GetRegisterType(inst->VRegA_21t()); |
| if (!reg_type.IsIntegralTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "type " << reg_type |
| << " unexpected as arg to if-ltz/if-gez/if-gtz/if-lez"; |
| } |
| break; |
| } |
| case Instruction::AGET_BOOLEAN: |
| VerifyAGet(inst, reg_types_.Boolean(), true); |
| break; |
| case Instruction::AGET_BYTE: |
| VerifyAGet(inst, reg_types_.Byte(), true); |
| break; |
| case Instruction::AGET_CHAR: |
| VerifyAGet(inst, reg_types_.Char(), true); |
| break; |
| case Instruction::AGET_SHORT: |
| VerifyAGet(inst, reg_types_.Short(), true); |
| break; |
| case Instruction::AGET: |
| VerifyAGet(inst, reg_types_.Integer(), true); |
| break; |
| case Instruction::AGET_WIDE: |
| VerifyAGet(inst, reg_types_.LongLo(), true); |
| break; |
| case Instruction::AGET_OBJECT: |
| VerifyAGet(inst, reg_types_.JavaLangObject(false), false); |
| break; |
| |
| case Instruction::APUT_BOOLEAN: |
| VerifyAPut(inst, reg_types_.Boolean(), true); |
| break; |
| case Instruction::APUT_BYTE: |
| VerifyAPut(inst, reg_types_.Byte(), true); |
| break; |
| case Instruction::APUT_CHAR: |
| VerifyAPut(inst, reg_types_.Char(), true); |
| break; |
| case Instruction::APUT_SHORT: |
| VerifyAPut(inst, reg_types_.Short(), true); |
| break; |
| case Instruction::APUT: |
| VerifyAPut(inst, reg_types_.Integer(), true); |
| break; |
| case Instruction::APUT_WIDE: |
| VerifyAPut(inst, reg_types_.LongLo(), true); |
| break; |
| case Instruction::APUT_OBJECT: |
| VerifyAPut(inst, reg_types_.JavaLangObject(false), false); |
| break; |
| |
| case Instruction::IGET_BOOLEAN: |
| VerifyISGet(inst, reg_types_.Boolean(), true, false); |
| break; |
| case Instruction::IGET_BYTE: |
| VerifyISGet(inst, reg_types_.Byte(), true, false); |
| break; |
| case Instruction::IGET_CHAR: |
| VerifyISGet(inst, reg_types_.Char(), true, false); |
| break; |
| case Instruction::IGET_SHORT: |
| VerifyISGet(inst, reg_types_.Short(), true, false); |
| break; |
| case Instruction::IGET: |
| VerifyISGet(inst, reg_types_.Integer(), true, false); |
| break; |
| case Instruction::IGET_WIDE: |
| VerifyISGet(inst, reg_types_.LongLo(), true, false); |
| break; |
| case Instruction::IGET_OBJECT: |
| VerifyISGet(inst, reg_types_.JavaLangObject(false), false, false); |
| break; |
| |
| case Instruction::IPUT_BOOLEAN: |
| VerifyISPut(inst, reg_types_.Boolean(), true, false); |
| break; |
| case Instruction::IPUT_BYTE: |
| VerifyISPut(inst, reg_types_.Byte(), true, false); |
| break; |
| case Instruction::IPUT_CHAR: |
| VerifyISPut(inst, reg_types_.Char(), true, false); |
| break; |
| case Instruction::IPUT_SHORT: |
| VerifyISPut(inst, reg_types_.Short(), true, false); |
| break; |
| case Instruction::IPUT: |
| VerifyISPut(inst, reg_types_.Integer(), true, false); |
| break; |
| case Instruction::IPUT_WIDE: |
| VerifyISPut(inst, reg_types_.LongLo(), true, false); |
| break; |
| case Instruction::IPUT_OBJECT: |
| VerifyISPut(inst, reg_types_.JavaLangObject(false), false, false); |
| break; |
| |
| case Instruction::SGET_BOOLEAN: |
| VerifyISGet(inst, reg_types_.Boolean(), true, true); |
| break; |
| case Instruction::SGET_BYTE: |
| VerifyISGet(inst, reg_types_.Byte(), true, true); |
| break; |
| case Instruction::SGET_CHAR: |
| VerifyISGet(inst, reg_types_.Char(), true, true); |
| break; |
| case Instruction::SGET_SHORT: |
| VerifyISGet(inst, reg_types_.Short(), true, true); |
| break; |
| case Instruction::SGET: |
| VerifyISGet(inst, reg_types_.Integer(), true, true); |
| break; |
| case Instruction::SGET_WIDE: |
| VerifyISGet(inst, reg_types_.LongLo(), true, true); |
| break; |
| case Instruction::SGET_OBJECT: |
| VerifyISGet(inst, reg_types_.JavaLangObject(false), false, true); |
| break; |
| |
| case Instruction::SPUT_BOOLEAN: |
| VerifyISPut(inst, reg_types_.Boolean(), true, true); |
| break; |
| case Instruction::SPUT_BYTE: |
| VerifyISPut(inst, reg_types_.Byte(), true, true); |
| break; |
| case Instruction::SPUT_CHAR: |
| VerifyISPut(inst, reg_types_.Char(), true, true); |
| break; |
| case Instruction::SPUT_SHORT: |
| VerifyISPut(inst, reg_types_.Short(), true, true); |
| break; |
| case Instruction::SPUT: |
| VerifyISPut(inst, reg_types_.Integer(), true, true); |
| break; |
| case Instruction::SPUT_WIDE: |
| VerifyISPut(inst, reg_types_.LongLo(), true, true); |
| break; |
| case Instruction::SPUT_OBJECT: |
| VerifyISPut(inst, reg_types_.JavaLangObject(false), false, true); |
| break; |
| |
| case Instruction::INVOKE_VIRTUAL: |
| case Instruction::INVOKE_VIRTUAL_RANGE: |
| case Instruction::INVOKE_SUPER: |
| case Instruction::INVOKE_SUPER_RANGE: { |
| bool is_range = (inst->Opcode() == Instruction::INVOKE_VIRTUAL_RANGE || |
| inst->Opcode() == Instruction::INVOKE_SUPER_RANGE); |
| bool is_super = (inst->Opcode() == Instruction::INVOKE_SUPER || |
| inst->Opcode() == Instruction::INVOKE_SUPER_RANGE); |
| mirror::ArtMethod* called_method = VerifyInvocationArgs(inst, METHOD_VIRTUAL, |
| is_range, is_super); |
| const RegType* return_type = nullptr; |
| if (called_method != nullptr) { |
| MethodHelper mh(called_method); |
| mirror::Class* return_type_class = mh.GetReturnType(can_load_classes_); |
| if (return_type_class != nullptr) { |
| return_type = ®_types_.FromClass(mh.GetReturnTypeDescriptor(), return_type_class, |
| return_type_class->CannotBeAssignedFromOtherTypes()); |
| } else { |
| Thread* self = Thread::Current(); |
| DCHECK(!can_load_classes_ || self->IsExceptionPending()); |
| self->ClearException(); |
| } |
| } |
| if (return_type == nullptr) { |
| uint32_t method_idx = (is_range) ? inst->VRegB_3rc() : inst->VRegB_35c(); |
| const DexFile::MethodId& method_id = dex_file_->GetMethodId(method_idx); |
| uint32_t return_type_idx = dex_file_->GetProtoId(method_id.proto_idx_).return_type_idx_; |
| const char* descriptor = dex_file_->StringByTypeIdx(return_type_idx); |
| return_type = ®_types_.FromDescriptor(class_loader_->get(), descriptor, false); |
| } |
| if (!return_type->IsLowHalf()) { |
| work_line_->SetResultRegisterType(*return_type); |
| } else { |
| work_line_->SetResultRegisterTypeWide(*return_type, return_type->HighHalf(®_types_)); |
| } |
| just_set_result = true; |
| break; |
| } |
| case Instruction::INVOKE_DIRECT: |
| case Instruction::INVOKE_DIRECT_RANGE: { |
| bool is_range = (inst->Opcode() == Instruction::INVOKE_DIRECT_RANGE); |
| mirror::ArtMethod* called_method = VerifyInvocationArgs(inst, METHOD_DIRECT, |
| is_range, false); |
| const char* return_type_descriptor; |
| bool is_constructor; |
| if (called_method == NULL) { |
| uint32_t method_idx = (is_range) ? inst->VRegB_3rc() : inst->VRegB_35c(); |
| const DexFile::MethodId& method_id = dex_file_->GetMethodId(method_idx); |
| is_constructor = strcmp("<init>", dex_file_->StringDataByIdx(method_id.name_idx_)) == 0; |
| uint32_t return_type_idx = dex_file_->GetProtoId(method_id.proto_idx_).return_type_idx_; |
| return_type_descriptor = dex_file_->StringByTypeIdx(return_type_idx); |
| } else { |
| is_constructor = called_method->IsConstructor(); |
| return_type_descriptor = MethodHelper(called_method).GetReturnTypeDescriptor(); |
| } |
| if (is_constructor) { |
| /* |
| * Some additional checks when calling a constructor. We know from the invocation arg check |
| * that the "this" argument is an instance of called_method->klass. Now we further restrict |
| * that to require that called_method->klass is the same as this->klass or this->super, |
| * allowing the latter only if the "this" argument is the same as the "this" argument to |
| * this method (which implies that we're in a constructor ourselves). |
| */ |
| const RegType& this_type = work_line_->GetInvocationThis(inst, is_range); |
| if (this_type.IsConflict()) // failure. |
| break; |
| |
| /* no null refs allowed (?) */ |
| if (this_type.IsZero()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unable to initialize null ref"; |
| break; |
| } |
| |
| /* must be in same class or in superclass */ |
| // const RegType& this_super_klass = this_type.GetSuperClass(®_types_); |
| // TODO: re-enable constructor type verification |
| // if (this_super_klass.IsConflict()) { |
| // Unknown super class, fail so we re-check at runtime. |
| // Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "super class unknown for '" << this_type << "'"; |
| // break; |
| // } |
| |
| /* arg must be an uninitialized reference */ |
| if (!this_type.IsUninitializedTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Expected initialization on uninitialized reference " |
| << this_type; |
| break; |
| } |
| |
| /* |
| * Replace the uninitialized reference with an initialized one. We need to do this for all |
| * registers that have the same object instance in them, not just the "this" register. |
| */ |
| work_line_->MarkRefsAsInitialized(this_type); |
| } |
| const RegType& return_type = reg_types_.FromDescriptor(class_loader_->get(), |
| return_type_descriptor, false); |
| if (!return_type.IsLowHalf()) { |
| work_line_->SetResultRegisterType(return_type); |
| } else { |
| work_line_->SetResultRegisterTypeWide(return_type, return_type.HighHalf(®_types_)); |
| } |
| just_set_result = true; |
| break; |
| } |
| case Instruction::INVOKE_STATIC: |
| case Instruction::INVOKE_STATIC_RANGE: { |
| bool is_range = (inst->Opcode() == Instruction::INVOKE_STATIC_RANGE); |
| mirror::ArtMethod* called_method = VerifyInvocationArgs(inst, |
| METHOD_STATIC, |
| is_range, |
| false); |
| const char* descriptor; |
| if (called_method == NULL) { |
| uint32_t method_idx = (is_range) ? inst->VRegB_3rc() : inst->VRegB_35c(); |
| const DexFile::MethodId& method_id = dex_file_->GetMethodId(method_idx); |
| uint32_t return_type_idx = dex_file_->GetProtoId(method_id.proto_idx_).return_type_idx_; |
| descriptor = dex_file_->StringByTypeIdx(return_type_idx); |
| } else { |
| descriptor = MethodHelper(called_method).GetReturnTypeDescriptor(); |
| } |
| const RegType& return_type = reg_types_.FromDescriptor(class_loader_->get(), descriptor, |
| false); |
| if (!return_type.IsLowHalf()) { |
| work_line_->SetResultRegisterType(return_type); |
| } else { |
| work_line_->SetResultRegisterTypeWide(return_type, return_type.HighHalf(®_types_)); |
| } |
| just_set_result = true; |
| } |
| break; |
| case Instruction::INVOKE_INTERFACE: |
| case Instruction::INVOKE_INTERFACE_RANGE: { |
| bool is_range = (inst->Opcode() == Instruction::INVOKE_INTERFACE_RANGE); |
| mirror::ArtMethod* abs_method = VerifyInvocationArgs(inst, |
| METHOD_INTERFACE, |
| is_range, |
| false); |
| if (abs_method != NULL) { |
| mirror::Class* called_interface = abs_method->GetDeclaringClass(); |
| if (!called_interface->IsInterface() && !called_interface->IsObjectClass()) { |
| Fail(VERIFY_ERROR_CLASS_CHANGE) << "expected interface class in invoke-interface '" |
| << PrettyMethod(abs_method) << "'"; |
| break; |
| } |
| } |
| /* Get the type of the "this" arg, which should either be a sub-interface of called |
| * interface or Object (see comments in RegType::JoinClass). |
| */ |
| const RegType& this_type = work_line_->GetInvocationThis(inst, is_range); |
| if (this_type.IsZero()) { |
| /* null pointer always passes (and always fails at runtime) */ |
| } else { |
| if (this_type.IsUninitializedTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "interface call on uninitialized object " |
| << this_type; |
| break; |
| } |
| // In the past we have tried to assert that "called_interface" is assignable |
| // from "this_type.GetClass()", however, as we do an imprecise Join |
| // (RegType::JoinClass) we don't have full information on what interfaces are |
| // implemented by "this_type". For example, two classes may implement the same |
| // interfaces and have a common parent that doesn't implement the interface. The |
| // join will set "this_type" to the parent class and a test that this implements |
| // the interface will incorrectly fail. |
| } |
| /* |
| * We don't have an object instance, so we can't find the concrete method. However, all of |
| * the type information is in the abstract method, so we're good. |
| */ |
| const char* descriptor; |
| if (abs_method == NULL) { |
| uint32_t method_idx = (is_range) ? inst->VRegB_3rc() : inst->VRegB_35c(); |
| const DexFile::MethodId& method_id = dex_file_->GetMethodId(method_idx); |
| uint32_t return_type_idx = dex_file_->GetProtoId(method_id.proto_idx_).return_type_idx_; |
| descriptor = dex_file_->StringByTypeIdx(return_type_idx); |
| } else { |
| descriptor = MethodHelper(abs_method).GetReturnTypeDescriptor(); |
| } |
| const RegType& return_type = reg_types_.FromDescriptor(class_loader_->get(), descriptor, |
| false); |
| if (!return_type.IsLowHalf()) { |
| work_line_->SetResultRegisterType(return_type); |
| } else { |
| work_line_->SetResultRegisterTypeWide(return_type, return_type.HighHalf(®_types_)); |
| } |
| just_set_result = true; |
| break; |
| } |
| case Instruction::NEG_INT: |
| case Instruction::NOT_INT: |
| work_line_->CheckUnaryOp(inst, reg_types_.Integer(), reg_types_.Integer()); |
| break; |
| case Instruction::NEG_LONG: |
| case Instruction::NOT_LONG: |
| work_line_->CheckUnaryOpWide(inst, reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.LongLo(), reg_types_.LongHi()); |
| break; |
| case Instruction::NEG_FLOAT: |
| work_line_->CheckUnaryOp(inst, reg_types_.Float(), reg_types_.Float()); |
| break; |
| case Instruction::NEG_DOUBLE: |
| work_line_->CheckUnaryOpWide(inst, reg_types_.DoubleLo(), reg_types_.DoubleHi(), |
| reg_types_.DoubleLo(), reg_types_.DoubleHi()); |
| break; |
| case Instruction::INT_TO_LONG: |
| work_line_->CheckUnaryOpToWide(inst, reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.Integer()); |
| break; |
| case Instruction::INT_TO_FLOAT: |
| work_line_->CheckUnaryOp(inst, reg_types_.Float(), reg_types_.Integer()); |
| break; |
| case Instruction::INT_TO_DOUBLE: |
| work_line_->CheckUnaryOpToWide(inst, reg_types_.DoubleLo(), reg_types_.DoubleHi(), |
| reg_types_.Integer()); |
| break; |
| case Instruction::LONG_TO_INT: |
| work_line_->CheckUnaryOpFromWide(inst, reg_types_.Integer(), |
| reg_types_.LongLo(), reg_types_.LongHi()); |
| break; |
| case Instruction::LONG_TO_FLOAT: |
| work_line_->CheckUnaryOpFromWide(inst, reg_types_.Float(), |
| reg_types_.LongLo(), reg_types_.LongHi()); |
| break; |
| case Instruction::LONG_TO_DOUBLE: |
| work_line_->CheckUnaryOpWide(inst, reg_types_.DoubleLo(), reg_types_.DoubleHi(), |
| reg_types_.LongLo(), reg_types_.LongHi()); |
| break; |
| case Instruction::FLOAT_TO_INT: |
| work_line_->CheckUnaryOp(inst, reg_types_.Integer(), reg_types_.Float()); |
| break; |
| case Instruction::FLOAT_TO_LONG: |
| work_line_->CheckUnaryOpToWide(inst, reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.Float()); |
| break; |
| case Instruction::FLOAT_TO_DOUBLE: |
| work_line_->CheckUnaryOpToWide(inst, reg_types_.DoubleLo(), reg_types_.DoubleHi(), |
| reg_types_.Float()); |
| break; |
| case Instruction::DOUBLE_TO_INT: |
| work_line_->CheckUnaryOpFromWide(inst, reg_types_.Integer(), |
| reg_types_.DoubleLo(), reg_types_.DoubleHi()); |
| break; |
| case Instruction::DOUBLE_TO_LONG: |
| work_line_->CheckUnaryOpWide(inst, reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.DoubleLo(), reg_types_.DoubleHi()); |
| break; |
| case Instruction::DOUBLE_TO_FLOAT: |
| work_line_->CheckUnaryOpFromWide(inst, reg_types_.Float(), |
| reg_types_.DoubleLo(), reg_types_.DoubleHi()); |
| break; |
| case Instruction::INT_TO_BYTE: |
| work_line_->CheckUnaryOp(inst, reg_types_.Byte(), reg_types_.Integer()); |
| break; |
| case Instruction::INT_TO_CHAR: |
| work_line_->CheckUnaryOp(inst, reg_types_.Char(), reg_types_.Integer()); |
| break; |
| case Instruction::INT_TO_SHORT: |
| work_line_->CheckUnaryOp(inst, reg_types_.Short(), reg_types_.Integer()); |
| break; |
| |
| case Instruction::ADD_INT: |
| case Instruction::SUB_INT: |
| case Instruction::MUL_INT: |
| case Instruction::REM_INT: |
| case Instruction::DIV_INT: |
| case Instruction::SHL_INT: |
| case Instruction::SHR_INT: |
| case Instruction::USHR_INT: |
| work_line_->CheckBinaryOp(inst, reg_types_.Integer(), reg_types_.Integer(), |
| reg_types_.Integer(), false); |
| break; |
| case Instruction::AND_INT: |
| case Instruction::OR_INT: |
| case Instruction::XOR_INT: |
| work_line_->CheckBinaryOp(inst, reg_types_.Integer(), reg_types_.Integer(), |
| reg_types_.Integer(), true); |
| break; |
| case Instruction::ADD_LONG: |
| case Instruction::SUB_LONG: |
| case Instruction::MUL_LONG: |
| case Instruction::DIV_LONG: |
| case Instruction::REM_LONG: |
| case Instruction::AND_LONG: |
| case Instruction::OR_LONG: |
| case Instruction::XOR_LONG: |
| work_line_->CheckBinaryOpWide(inst, reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.LongLo(), reg_types_.LongHi()); |
| break; |
| case Instruction::SHL_LONG: |
| case Instruction::SHR_LONG: |
| case Instruction::USHR_LONG: |
| /* shift distance is Int, making these different from other binary operations */ |
| work_line_->CheckBinaryOpWideShift(inst, reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.Integer()); |
| break; |
| case Instruction::ADD_FLOAT: |
| case Instruction::SUB_FLOAT: |
| case Instruction::MUL_FLOAT: |
| case Instruction::DIV_FLOAT: |
| case Instruction::REM_FLOAT: |
| work_line_->CheckBinaryOp(inst, |
| reg_types_.Float(), |
| reg_types_.Float(), |
| reg_types_.Float(), |
| false); |
| break; |
| case Instruction::ADD_DOUBLE: |
| case Instruction::SUB_DOUBLE: |
| case Instruction::MUL_DOUBLE: |
| case Instruction::DIV_DOUBLE: |
| case Instruction::REM_DOUBLE: |
| work_line_->CheckBinaryOpWide(inst, reg_types_.DoubleLo(), reg_types_.DoubleHi(), |
| reg_types_.DoubleLo(), reg_types_.DoubleHi(), |
| reg_types_.DoubleLo(), reg_types_.DoubleHi()); |
| break; |
| case Instruction::ADD_INT_2ADDR: |
| case Instruction::SUB_INT_2ADDR: |
| case Instruction::MUL_INT_2ADDR: |
| case Instruction::REM_INT_2ADDR: |
| case Instruction::SHL_INT_2ADDR: |
| case Instruction::SHR_INT_2ADDR: |
| case Instruction::USHR_INT_2ADDR: |
| work_line_->CheckBinaryOp2addr(inst, |
| reg_types_.Integer(), |
| reg_types_.Integer(), |
| reg_types_.Integer(), |
| false); |
| break; |
| case Instruction::AND_INT_2ADDR: |
| case Instruction::OR_INT_2ADDR: |
| case Instruction::XOR_INT_2ADDR: |
| work_line_->CheckBinaryOp2addr(inst, |
| reg_types_.Integer(), |
| reg_types_.Integer(), |
| reg_types_.Integer(), |
| true); |
| break; |
| case Instruction::DIV_INT_2ADDR: |
| work_line_->CheckBinaryOp2addr(inst, |
| reg_types_.Integer(), |
| reg_types_.Integer(), |
| reg_types_.Integer(), |
| false); |
| break; |
| case Instruction::ADD_LONG_2ADDR: |
| case Instruction::SUB_LONG_2ADDR: |
| case Instruction::MUL_LONG_2ADDR: |
| case Instruction::DIV_LONG_2ADDR: |
| case Instruction::REM_LONG_2ADDR: |
| case Instruction::AND_LONG_2ADDR: |
| case Instruction::OR_LONG_2ADDR: |
| case Instruction::XOR_LONG_2ADDR: |
| work_line_->CheckBinaryOp2addrWide(inst, reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.LongLo(), reg_types_.LongHi()); |
| break; |
| case Instruction::SHL_LONG_2ADDR: |
| case Instruction::SHR_LONG_2ADDR: |
| case Instruction::USHR_LONG_2ADDR: |
| work_line_->CheckBinaryOp2addrWideShift(inst, reg_types_.LongLo(), reg_types_.LongHi(), |
| reg_types_.Integer()); |
| break; |
| case Instruction::ADD_FLOAT_2ADDR: |
| case Instruction::SUB_FLOAT_2ADDR: |
| case Instruction::MUL_FLOAT_2ADDR: |
| case Instruction::DIV_FLOAT_2ADDR: |
| case Instruction::REM_FLOAT_2ADDR: |
| work_line_->CheckBinaryOp2addr(inst, |
| reg_types_.Float(), |
| reg_types_.Float(), |
| reg_types_.Float(), |
| false); |
| break; |
| case Instruction::ADD_DOUBLE_2ADDR: |
| case Instruction::SUB_DOUBLE_2ADDR: |
| case Instruction::MUL_DOUBLE_2ADDR: |
| case Instruction::DIV_DOUBLE_2ADDR: |
| case Instruction::REM_DOUBLE_2ADDR: |
| work_line_->CheckBinaryOp2addrWide(inst, reg_types_.DoubleLo(), reg_types_.DoubleHi(), |
| reg_types_.DoubleLo(), reg_types_.DoubleHi(), |
| reg_types_.DoubleLo(), reg_types_.DoubleHi()); |
| break; |
| case Instruction::ADD_INT_LIT16: |
| case Instruction::RSUB_INT: |
| case Instruction::MUL_INT_LIT16: |
| case Instruction::DIV_INT_LIT16: |
| case Instruction::REM_INT_LIT16: |
| work_line_->CheckLiteralOp(inst, reg_types_.Integer(), reg_types_.Integer(), false, true); |
| break; |
| case Instruction::AND_INT_LIT16: |
| case Instruction::OR_INT_LIT16: |
| case Instruction::XOR_INT_LIT16: |
| work_line_->CheckLiteralOp(inst, reg_types_.Integer(), reg_types_.Integer(), true, true); |
| break; |
| case Instruction::ADD_INT_LIT8: |
| case Instruction::RSUB_INT_LIT8: |
| case Instruction::MUL_INT_LIT8: |
| case Instruction::DIV_INT_LIT8: |
| case Instruction::REM_INT_LIT8: |
| case Instruction::SHL_INT_LIT8: |
| case Instruction::SHR_INT_LIT8: |
| case Instruction::USHR_INT_LIT8: |
| work_line_->CheckLiteralOp(inst, reg_types_.Integer(), reg_types_.Integer(), false, false); |
| break; |
| case Instruction::AND_INT_LIT8: |
| case Instruction::OR_INT_LIT8: |
| case Instruction::XOR_INT_LIT8: |
| work_line_->CheckLiteralOp(inst, reg_types_.Integer(), reg_types_.Integer(), true, false); |
| break; |
| |
| // Special instructions. |
| case Instruction::RETURN_VOID_BARRIER: |
| DCHECK(Runtime::Current()->IsStarted()) << PrettyMethod(dex_method_idx_, *dex_file_); |
| if (!IsConstructor() || IsStatic()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "return-void-barrier not expected"; |
| } |
| break; |
| // Note: the following instructions encode offsets derived from class linking. |
| // As such they use Class*/Field*/AbstractMethod* as these offsets only have |
| // meaning if the class linking and resolution were successful. |
| case Instruction::IGET_QUICK: |
| VerifyIGetQuick(inst, reg_types_.Integer(), true); |
| break; |
| case Instruction::IGET_WIDE_QUICK: |
| VerifyIGetQuick(inst, reg_types_.LongLo(), true); |
| break; |
| case Instruction::IGET_OBJECT_QUICK: |
| VerifyIGetQuick(inst, reg_types_.JavaLangObject(false), false); |
| break; |
| case Instruction::IPUT_QUICK: |
| VerifyIPutQuick(inst, reg_types_.Integer(), true); |
| break; |
| case Instruction::IPUT_WIDE_QUICK: |
| VerifyIPutQuick(inst, reg_types_.LongLo(), true); |
| break; |
| case Instruction::IPUT_OBJECT_QUICK: |
| VerifyIPutQuick(inst, reg_types_.JavaLangObject(false), false); |
| break; |
| case Instruction::INVOKE_VIRTUAL_QUICK: |
| case Instruction::INVOKE_VIRTUAL_RANGE_QUICK: { |
| bool is_range = (inst->Opcode() == Instruction::INVOKE_VIRTUAL_RANGE_QUICK); |
| mirror::ArtMethod* called_method = VerifyInvokeVirtualQuickArgs(inst, is_range); |
| if (called_method != NULL) { |
| const char* descriptor = MethodHelper(called_method).GetReturnTypeDescriptor(); |
| const RegType& return_type = reg_types_.FromDescriptor(class_loader_->get(), descriptor, |
| false); |
| if (!return_type.IsLowHalf()) { |
| work_line_->SetResultRegisterType(return_type); |
| } else { |
| work_line_->SetResultRegisterTypeWide(return_type, return_type.HighHalf(®_types_)); |
| } |
| just_set_result = true; |
| } |
| break; |
| } |
| |
| /* These should never appear during verification. */ |
| case Instruction::UNUSED_3E: |
| case Instruction::UNUSED_3F: |
| case Instruction::UNUSED_40: |
| case Instruction::UNUSED_41: |
| case Instruction::UNUSED_42: |
| case Instruction::UNUSED_43: |
| case Instruction::UNUSED_79: |
| case Instruction::UNUSED_7A: |
| case Instruction::UNUSED_EB: |
| case Instruction::UNUSED_EC: |
| case Instruction::UNUSED_ED: |
| case Instruction::UNUSED_EE: |
| case Instruction::UNUSED_EF: |
| case Instruction::UNUSED_F0: |
| case Instruction::UNUSED_F1: |
| case Instruction::UNUSED_F2: |
| case Instruction::UNUSED_F3: |
| case Instruction::UNUSED_F4: |
| case Instruction::UNUSED_F5: |
| case Instruction::UNUSED_F6: |
| case Instruction::UNUSED_F7: |
| case Instruction::UNUSED_F8: |
| case Instruction::UNUSED_F9: |
| case Instruction::UNUSED_FA: |
| case Instruction::UNUSED_FB: |
| case Instruction::UNUSED_FC: |
| case Instruction::UNUSED_FD: |
| case Instruction::UNUSED_FE: |
| case Instruction::UNUSED_FF: |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Unexpected opcode " << inst->DumpString(dex_file_); |
| break; |
| |
| /* |
| * DO NOT add a "default" clause here. Without it the compiler will |
| * complain if an instruction is missing (which is desirable). |
| */ |
| } // end - switch (dec_insn.opcode) |
| |
| if (have_pending_hard_failure_) { |
| if (Runtime::Current()->IsCompiler()) { |
| /* When compiling, check that the last failure is a hard failure */ |
| CHECK_EQ(failures_[failures_.size() - 1], VERIFY_ERROR_BAD_CLASS_HARD); |
| } |
| /* immediate failure, reject class */ |
| info_messages_ << "Rejecting opcode " << inst->DumpString(dex_file_); |
| return false; |
| } else if (have_pending_runtime_throw_failure_) { |
| /* checking interpreter will throw, mark following code as unreachable */ |
| opcode_flags = Instruction::kThrow; |
| } |
| /* |
| * If we didn't just set the result register, clear it out. This ensures that you can only use |
| * "move-result" immediately after the result is set. (We could check this statically, but it's |
| * not expensive and it makes our debugging output cleaner.) |
| */ |
| if (!just_set_result) { |
| work_line_->SetResultTypeToUnknown(); |
| } |
| |
| |
| |
| /* |
| * Handle "branch". Tag the branch target. |
| * |
| * NOTE: instructions like Instruction::EQZ provide information about the |
| * state of the register when the branch is taken or not taken. For example, |
| * somebody could get a reference field, check it for zero, and if the |
| * branch is taken immediately store that register in a boolean field |
| * since the value is known to be zero. We do not currently account for |
| * that, and will reject the code. |
| * |
| * TODO: avoid re-fetching the branch target |
| */ |
| if ((opcode_flags & Instruction::kBranch) != 0) { |
| bool isConditional, selfOkay; |
| if (!GetBranchOffset(work_insn_idx_, &branch_target, &isConditional, &selfOkay)) { |
| /* should never happen after static verification */ |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "bad branch"; |
| return false; |
| } |
| DCHECK_EQ(isConditional, (opcode_flags & Instruction::kContinue) != 0); |
| if (!CheckNotMoveException(code_item_->insns_, work_insn_idx_ + branch_target)) { |
| return false; |
| } |
| /* update branch target, set "changed" if appropriate */ |
| if (NULL != branch_line.get()) { |
| if (!UpdateRegisters(work_insn_idx_ + branch_target, branch_line.get())) { |
| return false; |
| } |
| } else { |
| if (!UpdateRegisters(work_insn_idx_ + branch_target, work_line_.get())) { |
| return false; |
| } |
| } |
| } |
| |
| /* |
| * Handle "switch". Tag all possible branch targets. |
| * |
| * We've already verified that the table is structurally sound, so we |
| * just need to walk through and tag the targets. |
| */ |
| if ((opcode_flags & Instruction::kSwitch) != 0) { |
| int offset_to_switch = insns[1] | (((int32_t) insns[2]) << 16); |
| const uint16_t* switch_insns = insns + offset_to_switch; |
| int switch_count = switch_insns[1]; |
| int offset_to_targets, targ; |
| |
| if ((*insns & 0xff) == Instruction::PACKED_SWITCH) { |
| /* 0 = sig, 1 = count, 2/3 = first key */ |
| offset_to_targets = 4; |
| } else { |
| /* 0 = sig, 1 = count, 2..count * 2 = keys */ |
| DCHECK((*insns & 0xff) == Instruction::SPARSE_SWITCH); |
| offset_to_targets = 2 + 2 * switch_count; |
| } |
| |
| /* verify each switch target */ |
| for (targ = 0; targ < switch_count; targ++) { |
| int offset; |
| uint32_t abs_offset; |
| |
| /* offsets are 32-bit, and only partly endian-swapped */ |
| offset = switch_insns[offset_to_targets + targ * 2] | |
| (((int32_t) switch_insns[offset_to_targets + targ * 2 + 1]) << 16); |
| abs_offset = work_insn_idx_ + offset; |
| DCHECK_LT(abs_offset, code_item_->insns_size_in_code_units_); |
| if (!CheckNotMoveException(code_item_->insns_, abs_offset)) { |
| return false; |
| } |
| if (!UpdateRegisters(abs_offset, work_line_.get())) |
| return false; |
| } |
| } |
| |
| /* |
| * Handle instructions that can throw and that are sitting in a "try" block. (If they're not in a |
| * "try" block when they throw, control transfers out of the method.) |
| */ |
| if ((opcode_flags & Instruction::kThrow) != 0 && insn_flags_[work_insn_idx_].IsInTry()) { |
| bool within_catch_all = false; |
| CatchHandlerIterator iterator(*code_item_, work_insn_idx_); |
| |
| for (; iterator.HasNext(); iterator.Next()) { |
| if (iterator.GetHandlerTypeIndex() == DexFile::kDexNoIndex16) { |
| within_catch_all = true; |
| } |
| /* |
| * Merge registers into the "catch" block. We want to use the "savedRegs" rather than |
| * "work_regs", because at runtime the exception will be thrown before the instruction |
| * modifies any registers. |
| */ |
| if (!UpdateRegisters(iterator.GetHandlerAddress(), saved_line_.get())) { |
| return false; |
| } |
| } |
| |
| /* |
| * If the monitor stack depth is nonzero, there must be a "catch all" handler for this |
| * instruction. This does apply to monitor-exit because of async exception handling. |
| */ |
| if (work_line_->MonitorStackDepth() > 0 && !within_catch_all) { |
| /* |
| * The state in work_line reflects the post-execution state. If the current instruction is a |
| * monitor-enter and the monitor stack was empty, we don't need a catch-all (if it throws, |
| * it will do so before grabbing the lock). |
| */ |
| if (inst->Opcode() != Instruction::MONITOR_ENTER || work_line_->MonitorStackDepth() != 1) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) |
| << "expected to be within a catch-all for an instruction where a monitor is held"; |
| return false; |
| } |
| } |
| } |
| |
| /* Handle "continue". Tag the next consecutive instruction. |
| * Note: Keep the code handling "continue" case below the "branch" and "switch" cases, |
| * because it changes work_line_ when performing peephole optimization |
| * and this change should not be used in those cases. |
| */ |
| if ((opcode_flags & Instruction::kContinue) != 0) { |
| uint32_t next_insn_idx = work_insn_idx_ + CurrentInsnFlags()->GetLengthInCodeUnits(); |
| if (next_insn_idx >= code_item_->insns_size_in_code_units_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Execution can walk off end of code area"; |
| return false; |
| } |
| // The only way to get to a move-exception instruction is to get thrown there. Make sure the |
| // next instruction isn't one. |
| if (!CheckNotMoveException(code_item_->insns_, next_insn_idx)) { |
| return false; |
| } |
| if (NULL != fallthrough_line.get()) { |
| // Make workline consistent with fallthrough computed from peephole optimization. |
| work_line_->CopyFromLine(fallthrough_line.get()); |
| } |
| if (insn_flags_[next_insn_idx].IsReturn()) { |
| // For returns we only care about the operand to the return, all other registers are dead. |
| const Instruction* ret_inst = Instruction::At(code_item_->insns_ + next_insn_idx); |
| Instruction::Code opcode = ret_inst->Opcode(); |
| if ((opcode == Instruction::RETURN_VOID) || (opcode == Instruction::RETURN_VOID_BARRIER)) { |
| work_line_->MarkAllRegistersAsConflicts(); |
| } else { |
| if (opcode == Instruction::RETURN_WIDE) { |
| work_line_->MarkAllRegistersAsConflictsExceptWide(ret_inst->VRegA_11x()); |
| } else { |
| work_line_->MarkAllRegistersAsConflictsExcept(ret_inst->VRegA_11x()); |
| } |
| } |
| } |
| RegisterLine* next_line = reg_table_.GetLine(next_insn_idx); |
| if (next_line != NULL) { |
| // Merge registers into what we have for the next instruction, |
| // and set the "changed" flag if needed. |
| if (!UpdateRegisters(next_insn_idx, work_line_.get())) { |
| return false; |
| } |
| } else { |
| /* |
| * We're not recording register data for the next instruction, so we don't know what the |
| * prior state was. We have to assume that something has changed and re-evaluate it. |
| */ |
| insn_flags_[next_insn_idx].SetChanged(); |
| } |
| } |
| |
| /* If we're returning from the method, make sure monitor stack is empty. */ |
| if ((opcode_flags & Instruction::kReturn) != 0) { |
| if (!work_line_->VerifyMonitorStackEmpty()) { |
| return false; |
| } |
| } |
| |
| /* |
| * Update start_guess. Advance to the next instruction of that's |
| * possible, otherwise use the branch target if one was found. If |
| * neither of those exists we're in a return or throw; leave start_guess |
| * alone and let the caller sort it out. |
| */ |
| if ((opcode_flags & Instruction::kContinue) != 0) { |
| *start_guess = work_insn_idx_ + insn_flags_[work_insn_idx_].GetLengthInCodeUnits(); |
| } else if ((opcode_flags & Instruction::kBranch) != 0) { |
| /* we're still okay if branch_target is zero */ |
| *start_guess = work_insn_idx_ + branch_target; |
| } |
| |
| DCHECK_LT(*start_guess, code_item_->insns_size_in_code_units_); |
| DCHECK(insn_flags_[*start_guess].IsOpcode()); |
| |
| return true; |
| } // NOLINT(readability/fn_size) |
| |
| const RegType& MethodVerifier::ResolveClassAndCheckAccess(uint32_t class_idx) { |
| const char* descriptor = dex_file_->StringByTypeIdx(class_idx); |
| const RegType& referrer = GetDeclaringClass(); |
| mirror::Class* klass = (*dex_cache_)->GetResolvedType(class_idx); |
| const RegType& result = |
| klass != NULL ? reg_types_.FromClass(descriptor, klass, |
| klass->CannotBeAssignedFromOtherTypes()) |
| : reg_types_.FromDescriptor(class_loader_->get(), descriptor, false); |
| if (result.IsConflict()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "accessing broken descriptor '" << descriptor |
| << "' in " << referrer; |
| return result; |
| } |
| if (klass == NULL && !result.IsUnresolvedTypes()) { |
| (*dex_cache_)->SetResolvedType(class_idx, result.GetClass()); |
| } |
| // Check if access is allowed. Unresolved types use xxxWithAccessCheck to |
| // check at runtime if access is allowed and so pass here. If result is |
| // primitive, skip the access check. |
| if (result.IsNonZeroReferenceTypes() && !result.IsUnresolvedTypes() && |
| !referrer.IsUnresolvedTypes() && !referrer.CanAccess(result)) { |
| Fail(VERIFY_ERROR_ACCESS_CLASS) << "illegal class access: '" |
| << referrer << "' -> '" << result << "'"; |
| } |
| return result; |
| } |
| |
| const RegType& MethodVerifier::GetCaughtExceptionType() { |
| const RegType* common_super = NULL; |
| if (code_item_->tries_size_ != 0) { |
| const byte* handlers_ptr = DexFile::GetCatchHandlerData(*code_item_, 0); |
| uint32_t handlers_size = DecodeUnsignedLeb128(&handlers_ptr); |
| for (uint32_t i = 0; i < handlers_size; i++) { |
| CatchHandlerIterator iterator(handlers_ptr); |
| for (; iterator.HasNext(); iterator.Next()) { |
| if (iterator.GetHandlerAddress() == (uint32_t) work_insn_idx_) { |
| if (iterator.GetHandlerTypeIndex() == DexFile::kDexNoIndex16) { |
| common_super = ®_types_.JavaLangThrowable(false); |
| } else { |
| const RegType& exception = ResolveClassAndCheckAccess(iterator.GetHandlerTypeIndex()); |
| if (common_super == NULL) { |
| // Unconditionally assign for the first handler. We don't assert this is a Throwable |
| // as that is caught at runtime |
| common_super = &exception; |
| } else if (!reg_types_.JavaLangThrowable(false).IsAssignableFrom(exception)) { |
| if (exception.IsUnresolvedTypes()) { |
| // We don't know enough about the type. Fail here and let runtime handle it. |
| Fail(VERIFY_ERROR_NO_CLASS) << "unresolved exception class " << exception; |
| return exception; |
| } else { |
| Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "unexpected non-exception class " << exception; |
| return reg_types_.Conflict(); |
| } |
| } else if (common_super->Equals(exception)) { |
| // odd case, but nothing to do |
| } else { |
| common_super = &common_super->Merge(exception, ®_types_); |
| CHECK(reg_types_.JavaLangThrowable(false).IsAssignableFrom(*common_super)); |
| } |
| } |
| } |
| } |
| handlers_ptr = iterator.EndDataPointer(); |
| } |
| } |
| if (common_super == NULL) { |
| /* no catch blocks, or no catches with classes we can find */ |
| Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "unable to find exception handler"; |
| return reg_types_.Conflict(); |
| } |
| return *common_super; |
| } |
| |
| mirror::ArtMethod* MethodVerifier::ResolveMethodAndCheckAccess(uint32_t dex_method_idx, |
| MethodType method_type) { |
| const DexFile::MethodId& method_id = dex_file_->GetMethodId(dex_method_idx); |
| const RegType& klass_type = ResolveClassAndCheckAccess(method_id.class_idx_); |
| if (klass_type.IsConflict()) { |
| std::string append(" in attempt to access method "); |
| append += dex_file_->GetMethodName(method_id); |
| AppendToLastFailMessage(append); |
| return NULL; |
| } |
| if (klass_type.IsUnresolvedTypes()) { |
| return NULL; // Can't resolve Class so no more to do here |
| } |
| mirror::Class* klass = klass_type.GetClass(); |
| const RegType& referrer = GetDeclaringClass(); |
| mirror::ArtMethod* res_method = (*dex_cache_)->GetResolvedMethod(dex_method_idx); |
| if (res_method == NULL) { |
| const char* name = dex_file_->GetMethodName(method_id); |
| const Signature signature = dex_file_->GetMethodSignature(method_id); |
| |
| if (method_type == METHOD_DIRECT || method_type == METHOD_STATIC) { |
| res_method = klass->FindDirectMethod(name, signature); |
| } else if (method_type == METHOD_INTERFACE) { |
| res_method = klass->FindInterfaceMethod(name, signature); |
| } else { |
| res_method = klass->FindVirtualMethod(name, signature); |
| } |
| if (res_method != NULL) { |
| (*dex_cache_)->SetResolvedMethod(dex_method_idx, res_method); |
| } else { |
| // If a virtual or interface method wasn't found with the expected type, look in |
| // the direct methods. This can happen when the wrong invoke type is used or when |
| // a class has changed, and will be flagged as an error in later checks. |
| if (method_type == METHOD_INTERFACE || method_type == METHOD_VIRTUAL) { |
| res_method = klass->FindDirectMethod(name, signature); |
| } |
| if (res_method == NULL) { |
| Fail(VERIFY_ERROR_NO_METHOD) << "couldn't find method " |
| << PrettyDescriptor(klass) << "." << name |
| << " " << signature; |
| return NULL; |
| } |
| } |
| } |
| // Make sure calls to constructors are "direct". There are additional restrictions but we don't |
| // enforce them here. |
| if (res_method->IsConstructor() && method_type != METHOD_DIRECT) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "rejecting non-direct call to constructor " |
| << PrettyMethod(res_method); |
| return NULL; |
| } |
| // Disallow any calls to class initializers. |
| if (MethodHelper(res_method).IsClassInitializer()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "rejecting call to class initializer " |
| << PrettyMethod(res_method); |
| return NULL; |
| } |
| // Check if access is allowed. |
| if (!referrer.CanAccessMember(res_method->GetDeclaringClass(), res_method->GetAccessFlags())) { |
| Fail(VERIFY_ERROR_ACCESS_METHOD) << "illegal method access (call " << PrettyMethod(res_method) |
| << " from " << referrer << ")"; |
| return res_method; |
| } |
| // Check that invoke-virtual and invoke-super are not used on private methods of the same class. |
| if (res_method->IsPrivate() && method_type == METHOD_VIRTUAL) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invoke-super/virtual can't be used on private method " |
| << PrettyMethod(res_method); |
| return NULL; |
| } |
| // Check that interface methods match interface classes. |
| if (klass->IsInterface() && method_type != METHOD_INTERFACE) { |
| Fail(VERIFY_ERROR_CLASS_CHANGE) << "non-interface method " << PrettyMethod(res_method) |
| << " is in an interface class " << PrettyClass(klass); |
| return NULL; |
| } else if (!klass->IsInterface() && method_type == METHOD_INTERFACE) { |
| Fail(VERIFY_ERROR_CLASS_CHANGE) << "interface method " << PrettyMethod(res_method) |
| << " is in a non-interface class " << PrettyClass(klass); |
| return NULL; |
| } |
| // See if the method type implied by the invoke instruction matches the access flags for the |
| // target method. |
| if ((method_type == METHOD_DIRECT && !res_method->IsDirect()) || |
| (method_type == METHOD_STATIC && !res_method->IsStatic()) || |
| ((method_type == METHOD_VIRTUAL || method_type == METHOD_INTERFACE) && res_method->IsDirect()) |
| ) { |
| Fail(VERIFY_ERROR_CLASS_CHANGE) << "invoke type (" << method_type << ") does not match method " |
| " type of " << PrettyMethod(res_method); |
| return NULL; |
| } |
| return res_method; |
| } |
| |
| mirror::ArtMethod* MethodVerifier::VerifyInvocationArgs(const Instruction* inst, |
| MethodType method_type, |
| bool is_range, |
| bool is_super) { |
| // Resolve the method. This could be an abstract or concrete method depending on what sort of call |
| // we're making. |
| const uint32_t method_idx = (is_range) ? inst->VRegB_3rc() : inst->VRegB_35c(); |
| mirror::ArtMethod* res_method = ResolveMethodAndCheckAccess(method_idx, method_type); |
| if (res_method == NULL) { // error or class is unresolved |
| return NULL; |
| } |
| |
| // If we're using invoke-super(method), make sure that the executing method's class' superclass |
| // has a vtable entry for the target method. |
| if (is_super) { |
| DCHECK(method_type == METHOD_VIRTUAL); |
| const RegType& super = GetDeclaringClass().GetSuperClass(®_types_); |
| if (super.IsUnresolvedTypes()) { |
| Fail(VERIFY_ERROR_NO_METHOD) << "unknown super class in invoke-super from " |
| << PrettyMethod(dex_method_idx_, *dex_file_) |
| << " to super " << PrettyMethod(res_method); |
| return NULL; |
| } |
| mirror::Class* super_klass = super.GetClass(); |
| if (res_method->GetMethodIndex() >= super_klass->GetVTable()->GetLength()) { |
| MethodHelper mh(res_method); |
| Fail(VERIFY_ERROR_NO_METHOD) << "invalid invoke-super from " |
| << PrettyMethod(dex_method_idx_, *dex_file_) |
| << " to super " << super |
| << "." << mh.GetName() |
| << mh.GetSignature(); |
| return NULL; |
| } |
| } |
| // We use vAA as our expected arg count, rather than res_method->insSize, because we need to |
| // match the call to the signature. Also, we might be calling through an abstract method |
| // definition (which doesn't have register count values). |
| const size_t expected_args = (is_range) ? inst->VRegA_3rc() : inst->VRegA_35c(); |
| /* caught by static verifier */ |
| DCHECK(is_range || expected_args <= 5); |
| if (expected_args > code_item_->outs_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid argument count (" << expected_args |
| << ") exceeds outsSize (" << code_item_->outs_size_ << ")"; |
| return NULL; |
| } |
| |
| /* |
| * Check the "this" argument, which must be an instance of the class that declared the method. |
| * For an interface class, we don't do the full interface merge (see JoinClass), so we can't do a |
| * rigorous check here (which is okay since we have to do it at runtime). |
| */ |
| size_t actual_args = 0; |
| if (!res_method->IsStatic()) { |
| const RegType& actual_arg_type = work_line_->GetInvocationThis(inst, is_range); |
| if (actual_arg_type.IsConflict()) { // GetInvocationThis failed. |
| return NULL; |
| } |
| if (actual_arg_type.IsUninitializedReference() && !res_method->IsConstructor()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "'this' arg must be initialized"; |
| return NULL; |
| } |
| if (method_type != METHOD_INTERFACE && !actual_arg_type.IsZero()) { |
| mirror::Class* klass = res_method->GetDeclaringClass(); |
| const RegType& res_method_class = |
| reg_types_.FromClass(ClassHelper(klass).GetDescriptor(), klass, |
| klass->CannotBeAssignedFromOtherTypes()); |
| if (!res_method_class.IsAssignableFrom(actual_arg_type)) { |
| Fail(actual_arg_type.IsUnresolvedTypes() ? VERIFY_ERROR_NO_CLASS: |
| VERIFY_ERROR_BAD_CLASS_SOFT) << "'this' argument '" << actual_arg_type |
| << "' not instance of '" << res_method_class << "'"; |
| return NULL; |
| } |
| } |
| actual_args++; |
| } |
| /* |
| * Process the target method's signature. This signature may or may not |
| * have been verified, so we can't assume it's properly formed. |
| */ |
| MethodHelper mh(res_method); |
| const DexFile::TypeList* params = mh.GetParameterTypeList(); |
| size_t params_size = params == NULL ? 0 : params->Size(); |
| uint32_t arg[5]; |
| if (!is_range) { |
| inst->GetArgs(arg); |
| } |
| for (size_t param_index = 0; param_index < params_size; param_index++) { |
| if (actual_args >= expected_args) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Rejecting invalid call to '" << PrettyMethod(res_method) |
| << "'. Expected " << expected_args << " arguments, processing argument " << actual_args |
| << " (where longs/doubles count twice)."; |
| return NULL; |
| } |
| const char* descriptor = |
| mh.GetTypeDescriptorFromTypeIdx(params->GetTypeItem(param_index).type_idx_); |
| if (descriptor == NULL) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Rejecting invocation of " << PrettyMethod(res_method) |
| << " missing signature component"; |
| return NULL; |
| } |
| const RegType& reg_type = reg_types_.FromDescriptor(class_loader_->get(), descriptor, false); |
| uint32_t get_reg = is_range ? inst->VRegC_3rc() + actual_args : arg[actual_args]; |
| if (reg_type.IsIntegralTypes()) { |
| const RegType& src_type = work_line_->GetRegisterType(get_reg); |
| if (!src_type.IsIntegralTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "register v" << get_reg << " has type " << src_type |
| << " but expected " << reg_type; |
| return res_method; |
| } |
| } else if (!work_line_->VerifyRegisterType(get_reg, reg_type)) { |
| return res_method; |
| } |
| actual_args = reg_type.IsLongOrDoubleTypes() ? actual_args + 2 : actual_args + 1; |
| } |
| if (actual_args != expected_args) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Rejecting invocation of " << PrettyMethod(res_method) |
| << " expected " << expected_args << " arguments, found " << actual_args; |
| return NULL; |
| } else { |
| return res_method; |
| } |
| } |
| |
| mirror::ArtMethod* MethodVerifier::GetQuickInvokedMethod(const Instruction* inst, |
| RegisterLine* reg_line, bool is_range) { |
| DCHECK(inst->Opcode() == Instruction::INVOKE_VIRTUAL_QUICK || |
| inst->Opcode() == Instruction::INVOKE_VIRTUAL_RANGE_QUICK); |
| const RegType& actual_arg_type = reg_line->GetInvocationThis(inst, is_range); |
| if (actual_arg_type.IsConflict()) { // GetInvocationThis failed. |
| return NULL; |
| } else if (actual_arg_type.IsZero()) { // Invoke on "null" instance: we can't go further. |
| return NULL; |
| } |
| mirror::Class* this_class = NULL; |
| if (!actual_arg_type.IsUnresolvedTypes()) { |
| this_class = actual_arg_type.GetClass(); |
| } else { |
| const std::string& descriptor(actual_arg_type.GetDescriptor()); |
| ClassLinker* class_linker = Runtime::Current()->GetClassLinker(); |
| this_class = class_linker->FindClass(descriptor.c_str(), *class_loader_); |
| if (this_class == NULL) { |
| Thread* self = Thread::Current(); |
| self->ClearException(); |
| // Look for a system class |
| SirtRef<mirror::ClassLoader> null_class_loader(self, nullptr); |
| this_class = class_linker->FindClass(descriptor.c_str(), null_class_loader); |
| } |
| } |
| if (this_class == NULL) { |
| return NULL; |
| } |
| mirror::ObjectArray<mirror::ArtMethod>* vtable = this_class->GetVTable(); |
| CHECK(vtable != NULL); |
| uint16_t vtable_index = is_range ? inst->VRegB_3rc() : inst->VRegB_35c(); |
| CHECK(vtable_index < vtable->GetLength()); |
| mirror::ArtMethod* res_method = vtable->Get(vtable_index); |
| CHECK(!Thread::Current()->IsExceptionPending()); |
| return res_method; |
| } |
| |
| mirror::ArtMethod* MethodVerifier::VerifyInvokeVirtualQuickArgs(const Instruction* inst, |
| bool is_range) { |
| DCHECK(Runtime::Current()->IsStarted()); |
| mirror::ArtMethod* res_method = GetQuickInvokedMethod(inst, work_line_.get(), |
| is_range); |
| if (res_method == NULL) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Cannot infer method from " << inst->Name(); |
| return NULL; |
| } |
| CHECK(!res_method->IsDirect() && !res_method->IsStatic()); |
| |
| // We use vAA as our expected arg count, rather than res_method->insSize, because we need to |
| // match the call to the signature. Also, we might be calling through an abstract method |
| // definition (which doesn't have register count values). |
| const RegType& actual_arg_type = work_line_->GetInvocationThis(inst, is_range); |
| if (actual_arg_type.IsConflict()) { // GetInvocationThis failed. |
| return NULL; |
| } |
| const size_t expected_args = (is_range) ? inst->VRegA_3rc() : inst->VRegA_35c(); |
| /* caught by static verifier */ |
| DCHECK(is_range || expected_args <= 5); |
| if (expected_args > code_item_->outs_size_) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid argument count (" << expected_args |
| << ") exceeds outsSize (" << code_item_->outs_size_ << ")"; |
| return NULL; |
| } |
| |
| /* |
| * Check the "this" argument, which must be an instance of the class that declared the method. |
| * For an interface class, we don't do the full interface merge (see JoinClass), so we can't do a |
| * rigorous check here (which is okay since we have to do it at runtime). |
| */ |
| if (actual_arg_type.IsUninitializedReference() && !res_method->IsConstructor()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "'this' arg must be initialized"; |
| return NULL; |
| } |
| if (!actual_arg_type.IsZero()) { |
| mirror::Class* klass = res_method->GetDeclaringClass(); |
| const RegType& res_method_class = |
| reg_types_.FromClass(ClassHelper(klass).GetDescriptor(), klass, |
| klass->CannotBeAssignedFromOtherTypes()); |
| if (!res_method_class.IsAssignableFrom(actual_arg_type)) { |
| Fail(actual_arg_type.IsUnresolvedTypes() ? VERIFY_ERROR_NO_CLASS : |
| VERIFY_ERROR_BAD_CLASS_SOFT) << "'this' argument '" << actual_arg_type |
| << "' not instance of '" << res_method_class << "'"; |
| return NULL; |
| } |
| } |
| /* |
| * Process the target method's signature. This signature may or may not |
| * have been verified, so we can't assume it's properly formed. |
| */ |
| MethodHelper mh(res_method); |
| const DexFile::TypeList* params = mh.GetParameterTypeList(); |
| size_t params_size = params == NULL ? 0 : params->Size(); |
| uint32_t arg[5]; |
| if (!is_range) { |
| inst->GetArgs(arg); |
| } |
| size_t actual_args = 1; |
| for (size_t param_index = 0; param_index < params_size; param_index++) { |
| if (actual_args >= expected_args) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Rejecting invalid call to '" << PrettyMethod(res_method) |
| << "'. Expected " << expected_args |
| << " arguments, processing argument " << actual_args |
| << " (where longs/doubles count twice)."; |
| return NULL; |
| } |
| const char* descriptor = |
| mh.GetTypeDescriptorFromTypeIdx(params->GetTypeItem(param_index).type_idx_); |
| if (descriptor == NULL) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Rejecting invocation of " << PrettyMethod(res_method) |
| << " missing signature component"; |
| return NULL; |
| } |
| const RegType& reg_type = reg_types_.FromDescriptor(class_loader_->get(), descriptor, false); |
| uint32_t get_reg = is_range ? inst->VRegC_3rc() + actual_args : arg[actual_args]; |
| if (!work_line_->VerifyRegisterType(get_reg, reg_type)) { |
| return res_method; |
| } |
| actual_args = reg_type.IsLongOrDoubleTypes() ? actual_args + 2 : actual_args + 1; |
| } |
| if (actual_args != expected_args) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Rejecting invocation of " << PrettyMethod(res_method) |
| << " expected " << expected_args << " arguments, found " << actual_args; |
| return NULL; |
| } else { |
| return res_method; |
| } |
| } |
| |
| void MethodVerifier::VerifyNewArray(const Instruction* inst, bool is_filled, bool is_range) { |
| uint32_t type_idx; |
| if (!is_filled) { |
| DCHECK_EQ(inst->Opcode(), Instruction::NEW_ARRAY); |
| type_idx = inst->VRegC_22c(); |
| } else if (!is_range) { |
| DCHECK_EQ(inst->Opcode(), Instruction::FILLED_NEW_ARRAY); |
| type_idx = inst->VRegB_35c(); |
| } else { |
| DCHECK_EQ(inst->Opcode(), Instruction::FILLED_NEW_ARRAY_RANGE); |
| type_idx = inst->VRegB_3rc(); |
| } |
| const RegType& res_type = ResolveClassAndCheckAccess(type_idx); |
| if (res_type.IsConflict()) { // bad class |
| DCHECK_NE(failures_.size(), 0U); |
| } else { |
| // TODO: check Compiler::CanAccessTypeWithoutChecks returns false when res_type is unresolved |
| if (!res_type.IsArrayTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "new-array on non-array class " << res_type; |
| } else if (!is_filled) { |
| /* make sure "size" register is valid type */ |
| work_line_->VerifyRegisterType(inst->VRegB_22c(), reg_types_.Integer()); |
| /* set register type to array class */ |
| const RegType& precise_type = reg_types_.FromUninitialized(res_type); |
| work_line_->SetRegisterType(inst->VRegA_22c(), precise_type); |
| } else { |
| // Verify each register. If "arg_count" is bad, VerifyRegisterType() will run off the end of |
| // the list and fail. It's legal, if silly, for arg_count to be zero. |
| const RegType& expected_type = reg_types_.GetComponentType(res_type, class_loader_->get()); |
| uint32_t arg_count = (is_range) ? inst->VRegA_3rc() : inst->VRegA_35c(); |
| uint32_t arg[5]; |
| if (!is_range) { |
| inst->GetArgs(arg); |
| } |
| for (size_t ui = 0; ui < arg_count; ui++) { |
| uint32_t get_reg = is_range ? inst->VRegC_3rc() + ui : arg[ui]; |
| if (!work_line_->VerifyRegisterType(get_reg, expected_type)) { |
| work_line_->SetResultRegisterType(reg_types_.Conflict()); |
| return; |
| } |
| } |
| // filled-array result goes into "result" register |
| const RegType& precise_type = reg_types_.FromUninitialized(res_type); |
| work_line_->SetResultRegisterType(precise_type); |
| } |
| } |
| } |
| |
| void MethodVerifier::VerifyAGet(const Instruction* inst, |
| const RegType& insn_type, bool is_primitive) { |
| const RegType& index_type = work_line_->GetRegisterType(inst->VRegC_23x()); |
| if (!index_type.IsArrayIndexTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Invalid reg type for array index (" << index_type << ")"; |
| } else { |
| const RegType& array_type = work_line_->GetRegisterType(inst->VRegB_23x()); |
| if (array_type.IsZero()) { |
| // Null array class; this code path will fail at runtime. Infer a merge-able type from the |
| // instruction type. TODO: have a proper notion of bottom here. |
| if (!is_primitive || insn_type.IsCategory1Types()) { |
| // Reference or category 1 |
| work_line_->SetRegisterType(inst->VRegA_23x(), reg_types_.Zero()); |
| } else { |
| // Category 2 |
| work_line_->SetRegisterTypeWide(inst->VRegA_23x(), reg_types_.FromCat2ConstLo(0, false), |
| reg_types_.FromCat2ConstHi(0, false)); |
| } |
| } else if (!array_type.IsArrayTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "not array type " << array_type << " with aget"; |
| } else { |
| /* verify the class */ |
| const RegType& component_type = reg_types_.GetComponentType(array_type, class_loader_->get()); |
| if (!component_type.IsReferenceTypes() && !is_primitive) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "primitive array type " << array_type |
| << " source for aget-object"; |
| } else if (component_type.IsNonZeroReferenceTypes() && is_primitive) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "reference array type " << array_type |
| << " source for category 1 aget"; |
| } else if (is_primitive && !insn_type.Equals(component_type) && |
| !((insn_type.IsInteger() && component_type.IsFloat()) || |
| (insn_type.IsLong() && component_type.IsDouble()))) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "array type " << array_type |
| << " incompatible with aget of type " << insn_type; |
| } else { |
| // Use knowledge of the field type which is stronger than the type inferred from the |
| // instruction, which can't differentiate object types and ints from floats, longs from |
| // doubles. |
| if (!component_type.IsLowHalf()) { |
| work_line_->SetRegisterType(inst->VRegA_23x(), component_type); |
| } else { |
| work_line_->SetRegisterTypeWide(inst->VRegA_23x(), component_type, |
| component_type.HighHalf(®_types_)); |
| } |
| } |
| } |
| } |
| } |
| |
| void MethodVerifier::VerifyPrimitivePut(const RegType& target_type, const RegType& insn_type, |
| const uint32_t vregA) { |
| // Primitive assignability rules are weaker than regular assignability rules. |
| bool instruction_compatible; |
| bool value_compatible; |
| const RegType& value_type = work_line_->GetRegisterType(vregA); |
| if (target_type.IsIntegralTypes()) { |
| instruction_compatible = target_type.Equals(insn_type); |
| value_compatible = value_type.IsIntegralTypes(); |
| } else if (target_type.IsFloat()) { |
| instruction_compatible = insn_type.IsInteger(); // no put-float, so expect put-int |
| value_compatible = value_type.IsFloatTypes(); |
| } else if (target_type.IsLong()) { |
| instruction_compatible = insn_type.IsLong(); |
| value_compatible = value_type.IsLongTypes(); |
| } else if (target_type.IsDouble()) { |
| instruction_compatible = insn_type.IsLong(); // no put-double, so expect put-long |
| value_compatible = value_type.IsDoubleTypes(); |
| } else { |
| instruction_compatible = false; // reference with primitive store |
| value_compatible = false; // unused |
| } |
| if (!instruction_compatible) { |
| // This is a global failure rather than a class change failure as the instructions and |
| // the descriptors for the type should have been consistent within the same file at |
| // compile time. |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "put insn has type '" << insn_type |
| << "' but expected type '" << target_type << "'"; |
| return; |
| } |
| if (!value_compatible) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unexpected value in v" << vregA |
| << " of type " << value_type << " but expected " << target_type << " for put"; |
| return; |
| } |
| } |
| |
| void MethodVerifier::VerifyAPut(const Instruction* inst, |
| const RegType& insn_type, bool is_primitive) { |
| const RegType& index_type = work_line_->GetRegisterType(inst->VRegC_23x()); |
| if (!index_type.IsArrayIndexTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Invalid reg type for array index (" << index_type << ")"; |
| } else { |
| const RegType& array_type = work_line_->GetRegisterType(inst->VRegB_23x()); |
| if (array_type.IsZero()) { |
| // Null array type; this code path will fail at runtime. Infer a merge-able type from the |
| // instruction type. |
| } else if (!array_type.IsArrayTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "not array type " << array_type << " with aput"; |
| } else { |
| const RegType& component_type = reg_types_.GetComponentType(array_type, class_loader_->get()); |
| const uint32_t vregA = inst->VRegA_23x(); |
| if (is_primitive) { |
| VerifyPrimitivePut(component_type, insn_type, vregA); |
| } else { |
| if (!component_type.IsReferenceTypes()) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "primitive array type " << array_type |
| << " source for aput-object"; |
| } else { |
| // The instruction agrees with the type of array, confirm the value to be stored does too |
| // Note: we use the instruction type (rather than the component type) for aput-object as |
| // incompatible classes will be caught at runtime as an array store exception |
| work_line_->VerifyRegisterType(vregA, insn_type); |
| } |
| } |
| } |
| } |
| } |
| |
| mirror::ArtField* MethodVerifier::GetStaticField(int field_idx) { |
| const DexFile::FieldId& field_id = dex_file_->GetFieldId(field_idx); |
| // Check access to class |
| const RegType& klass_type = ResolveClassAndCheckAccess(field_id.class_idx_); |
| if (klass_type.IsConflict()) { // bad class |
| AppendToLastFailMessage(StringPrintf(" in attempt to access static field %d (%s) in %s", |
| field_idx, dex_file_->GetFieldName(field_id), |
| dex_file_->GetFieldDeclaringClassDescriptor(field_id))); |
| return NULL; |
| } |
| if (klass_type.IsUnresolvedTypes()) { |
| return NULL; // Can't resolve Class so no more to do here, will do checking at runtime. |
| } |
| ClassLinker* class_linker = Runtime::Current()->GetClassLinker(); |
| mirror::ArtField* field = class_linker->ResolveFieldJLS(*dex_file_, field_idx, *dex_cache_, |
| *class_loader_); |
| if (field == NULL) { |
| VLOG(verifier) << "Unable to resolve static field " << field_idx << " (" |
| << dex_file_->GetFieldName(field_id) << ") in " |
| << dex_file_->GetFieldDeclaringClassDescriptor(field_id); |
| DCHECK(Thread::Current()->IsExceptionPending()); |
| Thread::Current()->ClearException(); |
| return NULL; |
| } else if (!GetDeclaringClass().CanAccessMember(field->GetDeclaringClass(), |
| field->GetAccessFlags())) { |
| Fail(VERIFY_ERROR_ACCESS_FIELD) << "cannot access static field " << PrettyField(field) |
| << " from " << GetDeclaringClass(); |
| return NULL; |
| } else if (!field->IsStatic()) { |
| Fail(VERIFY_ERROR_CLASS_CHANGE) << "expected field " << PrettyField(field) << " to be static"; |
| return NULL; |
| } |
| return field; |
| } |
| |
| mirror::ArtField* MethodVerifier::GetInstanceField(const RegType& obj_type, int field_idx) { |
| const DexFile::FieldId& field_id = dex_file_->GetFieldId(field_idx); |
| // Check access to class |
| const RegType& klass_type = ResolveClassAndCheckAccess(field_id.class_idx_); |
| if (klass_type.IsConflict()) { |
| AppendToLastFailMessage(StringPrintf(" in attempt to access instance field %d (%s) in %s", |
| field_idx, dex_file_->GetFieldName(field_id), |
| dex_file_->GetFieldDeclaringClassDescriptor(field_id))); |
| return NULL; |
| } |
| if (klass_type.IsUnresolvedTypes()) { |
| return NULL; // Can't resolve Class so no more to do here |
| } |
| ClassLinker* class_linker = Runtime::Current()->GetClassLinker(); |
| mirror::ArtField* field = class_linker->ResolveFieldJLS(*dex_file_, field_idx, *dex_cache_, |
| *class_loader_); |
| if (field == NULL) { |
| VLOG(verifier) << "Unable to resolve instance field " << field_idx << " (" |
| << dex_file_->GetFieldName(field_id) << ") in " |
| << dex_file_->GetFieldDeclaringClassDescriptor(field_id); |
| DCHECK(Thread::Current()->IsExceptionPending()); |
| Thread::Current()->ClearException(); |
| return NULL; |
| } else if (!GetDeclaringClass().CanAccessMember(field->GetDeclaringClass(), |
| field->GetAccessFlags())) { |
| Fail(VERIFY_ERROR_ACCESS_FIELD) << "cannot access instance field " << PrettyField(field) |
| << " from " << GetDeclaringClass(); |
| return NULL; |
| } else if (field->IsStatic()) { |
| Fail(VERIFY_ERROR_CLASS_CHANGE) << "expected field " << PrettyField(field) |
| << " to not be static"; |
| return NULL; |
| } else if (obj_type.IsZero()) { |
| // Cannot infer and check type, however, access will cause null pointer exception |
| return field; |
| } else { |
| mirror::Class* klass = field->GetDeclaringClass(); |
| const RegType& field_klass = |
| reg_types_.FromClass(dex_file_->GetFieldDeclaringClassDescriptor(field_id), |
| klass, klass->CannotBeAssignedFromOtherTypes()); |
| if (obj_type.IsUninitializedTypes() && |
| (!IsConstructor() || GetDeclaringClass().Equals(obj_type) || |
| !field_klass.Equals(GetDeclaringClass()))) { |
| // Field accesses through uninitialized references are only allowable for constructors where |
| // the field is declared in this class |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "cannot access instance field " << PrettyField(field) |
| << " of a not fully initialized object within the context" |
| << " of " << PrettyMethod(dex_method_idx_, *dex_file_); |
| return NULL; |
| } else if (!field_klass.IsAssignableFrom(obj_type)) { |
| // Trying to access C1.field1 using reference of type C2, which is neither C1 or a sub-class |
| // of C1. For resolution to occur the declared class of the field must be compatible with |
| // obj_type, we've discovered this wasn't so, so report the field didn't exist. |
| Fail(VERIFY_ERROR_NO_FIELD) << "cannot access instance field " << PrettyField(field) |
| << " from object of type " << obj_type; |
| return NULL; |
| } else { |
| return field; |
| } |
| } |
| } |
| |
| void MethodVerifier::VerifyISGet(const Instruction* inst, const RegType& insn_type, |
| bool is_primitive, bool is_static) { |
| uint32_t field_idx = is_static ? inst->VRegB_21c() : inst->VRegC_22c(); |
| mirror::ArtField* field; |
| if (is_static) { |
| field = GetStaticField(field_idx); |
| } else { |
| const RegType& object_type = work_line_->GetRegisterType(inst->VRegB_22c()); |
| field = GetInstanceField(object_type, field_idx); |
| } |
| const RegType* field_type = nullptr; |
| if (field != NULL) { |
| FieldHelper fh(field); |
| mirror::Class* field_type_class = fh.GetType(can_load_classes_); |
| if (field_type_class != nullptr) { |
| field_type = ®_types_.FromClass(fh.GetTypeDescriptor(), field_type_class, |
| field_type_class->CannotBeAssignedFromOtherTypes()); |
| } else { |
| Thread* self = Thread::Current(); |
| DCHECK(!can_load_classes_ || self->IsExceptionPending()); |
| self->ClearException(); |
| } |
| } |
| if (field_type == nullptr) { |
| const DexFile::FieldId& field_id = dex_file_->GetFieldId(field_idx); |
| const char* descriptor = dex_file_->GetFieldTypeDescriptor(field_id); |
| field_type = ®_types_.FromDescriptor(class_loader_->get(), descriptor, false); |
| } |
| const uint32_t vregA = (is_static) ? inst->VRegA_21c() : inst->VRegA_22c(); |
| if (is_primitive) { |
| if (field_type->Equals(insn_type) || |
| (field_type->IsFloat() && insn_type.IsInteger()) || |
| (field_type->IsDouble() && insn_type.IsLong())) { |
| // expected that read is of the correct primitive type or that int reads are reading |
| // floats or long reads are reading doubles |
| } else { |
| // This is a global failure rather than a class change failure as the instructions and |
| // the descriptors for the type should have been consistent within the same file at |
| // compile time |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "expected field " << PrettyField(field) |
| << " to be of type '" << insn_type |
| << "' but found type '" << field_type << "' in get"; |
| return; |
| } |
| } else { |
| if (!insn_type.IsAssignableFrom(*field_type)) { |
| Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "expected field " << PrettyField(field) |
| << " to be compatible with type '" << insn_type |
| << "' but found type '" << field_type |
| << "' in get-object"; |
| work_line_->SetRegisterType(vregA, reg_types_.Conflict()); |
| return; |
| } |
| } |
| if (!field_type->IsLowHalf()) { |
| work_line_->SetRegisterType(vregA, *field_type); |
| } else { |
| work_line_->SetRegisterTypeWide(vregA, *field_type, field_type->HighHalf(®_types_)); |
| } |
| } |
| |
| void MethodVerifier::VerifyISPut(const Instruction* inst, const RegType& insn_type, |
| bool is_primitive, bool is_static) { |
| uint32_t field_idx = is_static ? inst->VRegB_21c() : inst->VRegC_22c(); |
| mirror::ArtField* field; |
| if (is_static) { |
| field = GetStaticField(field_idx); |
| } else { |
| const RegType& object_type = work_line_->GetRegisterType(inst->VRegB_22c()); |
| field = GetInstanceField(object_type, field_idx); |
| } |
| const RegType* field_type = nullptr; |
| if (field != NULL) { |
| if (field->IsFinal() && field->GetDeclaringClass() != GetDeclaringClass().GetClass()) { |
| Fail(VERIFY_ERROR_ACCESS_FIELD) << "cannot modify final field " << PrettyField(field) |
| << " from other class " << GetDeclaringClass(); |
| return; |
| } |
| FieldHelper fh(field); |
| mirror::Class* field_type_class = fh.GetType(can_load_classes_); |
| if (field_type_class != nullptr) { |
| field_type = ®_types_.FromClass(fh.GetTypeDescriptor(), field_type_class, |
| field_type_class->CannotBeAssignedFromOtherTypes()); |
| } else { |
| Thread* self = Thread::Current(); |
| DCHECK(!can_load_classes_ || self->IsExceptionPending()); |
| self->ClearException(); |
| } |
| } |
| if (field_type == nullptr) { |
| const DexFile::FieldId& field_id = dex_file_->GetFieldId(field_idx); |
| const char* descriptor = dex_file_->GetFieldTypeDescriptor(field_id); |
| field_type = ®_types_.FromDescriptor(class_loader_->get(), descriptor, false); |
| } |
| const uint32_t vregA = (is_static) ? inst->VRegA_21c() : inst->VRegA_22c(); |
| if (is_primitive) { |
| VerifyPrimitivePut(*field_type, insn_type, vregA); |
| } else { |
| if (!insn_type.IsAssignableFrom(*field_type)) { |
| Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "expected field " << PrettyField(field) |
| << " to be compatible with type '" << insn_type |
| << "' but found type '" << field_type |
| << "' in put-object"; |
| return; |
| } |
| work_line_->VerifyRegisterType(vregA, *field_type); |
| } |
| } |
| |
| // Look for an instance field with this offset. |
| // TODO: we may speed up the search if offsets are sorted by doing a quick search. |
| static mirror::ArtField* FindInstanceFieldWithOffset(mirror::Class* klass, uint32_t field_offset) |
| SHARED_LOCKS_REQUIRED(Locks::mutator_lock_) { |
| mirror::ObjectArray<mirror::ArtField>* instance_fields = klass->GetIFields(); |
| if (instance_fields != NULL) { |
| for (int32_t i = 0, e = instance_fields->GetLength(); i < e; ++i) { |
| mirror::ArtField* field = instance_fields->Get(i); |
| if (field->GetOffset().Uint32Value() == field_offset) { |
| return field; |
| } |
| } |
| } |
| // We did not find field in class: look into superclass. |
| if (klass->GetSuperClass() != NULL) { |
| return FindInstanceFieldWithOffset(klass->GetSuperClass(), field_offset); |
| } else { |
| return NULL; |
| } |
| } |
| |
| // Returns the access field of a quick field access (iget/iput-quick) or NULL |
| // if it cannot be found. |
| mirror::ArtField* MethodVerifier::GetQuickFieldAccess(const Instruction* inst, |
| RegisterLine* reg_line) { |
| DCHECK(inst->Opcode() == Instruction::IGET_QUICK || |
| inst->Opcode() == Instruction::IGET_WIDE_QUICK || |
| inst->Opcode() == Instruction::IGET_OBJECT_QUICK || |
| inst->Opcode() == Instruction::IPUT_QUICK || |
| inst->Opcode() == Instruction::IPUT_WIDE_QUICK || |
| inst->Opcode() == Instruction::IPUT_OBJECT_QUICK); |
| const RegType& object_type = reg_line->GetRegisterType(inst->VRegB_22c()); |
| mirror::Class* object_class = NULL; |
| if (!object_type.IsUnresolvedTypes()) { |
| object_class = object_type.GetClass(); |
| } else { |
| // We need to resolve the class from its descriptor. |
| const std::string& descriptor(object_type.GetDescriptor()); |
| ClassLinker* class_linker = Runtime::Current()->GetClassLinker(); |
| Thread* self = Thread::Current(); |
| object_class = class_linker->FindClass(descriptor.c_str(), *class_loader_); |
| if (object_class == NULL) { |
| self->ClearException(); |
| // Look for a system class |
| SirtRef<mirror::ClassLoader> null_class_loader(self, nullptr); |
| object_class = class_linker->FindClass(descriptor.c_str(), null_class_loader); |
| } |
| } |
| if (object_class == NULL) { |
| // Failed to get the Class* from reg type. |
| LOG(WARNING) << "Failed to get Class* from " << object_type; |
| return NULL; |
| } |
| uint32_t field_offset = static_cast<uint32_t>(inst->VRegC_22c()); |
| return FindInstanceFieldWithOffset(object_class, field_offset); |
| } |
| |
| void MethodVerifier::VerifyIGetQuick(const Instruction* inst, const RegType& insn_type, |
| bool is_primitive) { |
| DCHECK(Runtime::Current()->IsStarted()); |
| mirror::ArtField* field = GetQuickFieldAccess(inst, work_line_.get()); |
| if (field == NULL) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Cannot infer field from " << inst->Name(); |
| return; |
| } |
| FieldHelper fh(field); |
| mirror::Class* field_type_class = fh.GetType(can_load_classes_); |
| const RegType* field_type; |
| if (field_type_class != nullptr) { |
| field_type = ®_types_.FromClass(fh.GetTypeDescriptor(), field_type_class, |
| field_type_class->CannotBeAssignedFromOtherTypes()); |
| } else { |
| Thread* self = Thread::Current(); |
| DCHECK(!can_load_classes_ || self->IsExceptionPending()); |
| self->ClearException(); |
| field_type = ®_types_.FromDescriptor(field->GetDeclaringClass()->GetClassLoader(), |
| fh.GetTypeDescriptor(), false); |
| } |
| const uint32_t vregA = inst->VRegA_22c(); |
| if (is_primitive) { |
| if (field_type->Equals(insn_type) || |
| (field_type->IsFloat() && insn_type.IsIntegralTypes()) || |
| (field_type->IsDouble() && insn_type.IsLongTypes())) { |
| // expected that read is of the correct primitive type or that int reads are reading |
| // floats or long reads are reading doubles |
| } else { |
| // This is a global failure rather than a class change failure as the instructions and |
| // the descriptors for the type should have been consistent within the same file at |
| // compile time |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "expected field " << PrettyField(field) |
| << " to be of type '" << insn_type |
| << "' but found type '" << field_type << "' in get"; |
| return; |
| } |
| } else { |
| if (!insn_type.IsAssignableFrom(*field_type)) { |
| Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "expected field " << PrettyField(field) |
| << " to be compatible with type '" << insn_type |
| << "' but found type '" << field_type |
| << "' in get-object"; |
| work_line_->SetRegisterType(vregA, reg_types_.Conflict()); |
| return; |
| } |
| } |
| if (!field_type->IsLowHalf()) { |
| work_line_->SetRegisterType(vregA, *field_type); |
| } else { |
| work_line_->SetRegisterTypeWide(vregA, *field_type, field_type->HighHalf(®_types_)); |
| } |
| } |
| |
| void MethodVerifier::VerifyIPutQuick(const Instruction* inst, const RegType& insn_type, |
| bool is_primitive) { |
| DCHECK(Runtime::Current()->IsStarted()); |
| mirror::ArtField* field = GetQuickFieldAccess(inst, work_line_.get()); |
| if (field == NULL) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "Cannot infer field from " << inst->Name(); |
| return; |
| } |
| const char* descriptor = FieldHelper(field).GetTypeDescriptor(); |
| mirror::ClassLoader* loader = field->GetDeclaringClass()->GetClassLoader(); |
| const RegType& field_type = reg_types_.FromDescriptor(loader, descriptor, false); |
| if (field != NULL) { |
| if (field->IsFinal() && field->GetDeclaringClass() != GetDeclaringClass().GetClass()) { |
| Fail(VERIFY_ERROR_ACCESS_FIELD) << "cannot modify final field " << PrettyField(field) |
| << " from other class " << GetDeclaringClass(); |
| return; |
| } |
| } |
| const uint32_t vregA = inst->VRegA_22c(); |
| if (is_primitive) { |
| // Primitive field assignability rules are weaker than regular assignability rules |
| bool instruction_compatible; |
| bool value_compatible; |
| const RegType& value_type = work_line_->GetRegisterType(vregA); |
| if (field_type.IsIntegralTypes()) { |
| instruction_compatible = insn_type.IsIntegralTypes(); |
| value_compatible = value_type.IsIntegralTypes(); |
| } else if (field_type.IsFloat()) { |
| instruction_compatible = insn_type.IsInteger(); // no [is]put-float, so expect [is]put-int |
| value_compatible = value_type.IsFloatTypes(); |
| } else if (field_type.IsLong()) { |
| instruction_compatible = insn_type.IsLong(); |
| value_compatible = value_type.IsLongTypes(); |
| } else if (field_type.IsDouble()) { |
| instruction_compatible = insn_type.IsLong(); // no [is]put-double, so expect [is]put-long |
| value_compatible = value_type.IsDoubleTypes(); |
| } else { |
| instruction_compatible = false; // reference field with primitive store |
| value_compatible = false; // unused |
| } |
| if (!instruction_compatible) { |
| // This is a global failure rather than a class change failure as the instructions and |
| // the descriptors for the type should have been consistent within the same file at |
| // compile time |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "expected field " << PrettyField(field) |
| << " to be of type '" << insn_type |
| << "' but found type '" << field_type |
| << "' in put"; |
| return; |
| } |
| if (!value_compatible) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "unexpected value in v" << vregA |
| << " of type " << value_type |
| << " but expected " << field_type |
| << " for store to " << PrettyField(field) << " in put"; |
| return; |
| } |
| } else { |
| if (!insn_type.IsAssignableFrom(field_type)) { |
| Fail(VERIFY_ERROR_BAD_CLASS_SOFT) << "expected field " << PrettyField(field) |
| << " to be compatible with type '" << insn_type |
| << "' but found type '" << field_type |
| << "' in put-object"; |
| return; |
| } |
| work_line_->VerifyRegisterType(vregA, field_type); |
| } |
| } |
| |
| bool MethodVerifier::CheckNotMoveException(const uint16_t* insns, int insn_idx) { |
| if ((insns[insn_idx] & 0xff) == Instruction::MOVE_EXCEPTION) { |
| Fail(VERIFY_ERROR_BAD_CLASS_HARD) << "invalid use of move-exception"; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MethodVerifier::UpdateRegisters(uint32_t next_insn, const RegisterLine* merge_line) { |
| bool changed = true; |
| RegisterLine* target_line = reg_table_.GetLine(next_insn); |
| if (!insn_flags_[next_insn].IsVisitedOrChanged()) { |
| /* |
| * We haven't processed this instruction before, and we haven't touched the registers here, so |
| * there's nothing to "merge". Copy the registers over and mark it as changed. (This is the |
| * only way a register can transition out of "unknown", so this is not just an optimization.) |
| */ |
| if (!insn_flags_[next_insn].IsReturn()) { |
| target_line->CopyFromLine(merge_line); |
| } else { |
| // Verify that the monitor stack is empty on return. |
| if (!merge_line->VerifyMonitorStackEmpty()) { |
| return false; |
| } |
| // For returns we only care about the operand to the return, all other registers are dead. |
| // Initialize them as conflicts so they don't add to GC and deoptimization information. |
| const Instruction* ret_inst = Instruction::At(code_item_->insns_ + next_insn); |
| Instruction::Code opcode = ret_inst->Opcode(); |
| if ((opcode == Instruction::RETURN_VOID) || (opcode == Instruction::RETURN_VOID_BARRIER)) { |
| target_line->MarkAllRegistersAsConflicts(); |
| } else { |
| target_line->CopyFromLine(merge_line); |
| if (opcode == Instruction::RETURN_WIDE) { |
| target_line->MarkAllRegistersAsConflictsExceptWide(ret_inst->VRegA_11x()); |
| } else { |
| target_line->MarkAllRegistersAsConflictsExcept(ret_inst->VRegA_11x()); |
| } |
| } |
| } |
| } else { |
| UniquePtr<RegisterLine> copy(gDebugVerify ? |
| RegisterLine::Create(target_line->NumRegs(), this) : |
| NULL); |
| if (gDebugVerify) { |
| copy->CopyFromLine(target_line); |
| } |
| changed = target_line->MergeRegisters(merge_line); |
| if (have_pending_hard_failure_) { |
| return false; |
| } |
| if (gDebugVerify && changed) { |
| LogVerifyInfo() << "Merging at [" << reinterpret_cast<void*>(work_insn_idx_) << "]" |
| << " to [" << reinterpret_cast<void*>(next_insn) << "]: " << "\n" |
| << *copy.get() << " MERGE\n" |
| << *merge_line << " ==\n" |
| << *target_line << "\n"; |
| } |
| } |
| if (changed) { |
| insn_flags_[next_insn].SetChanged(); |
| } |
| return true; |
| } |
| |
| InstructionFlags* MethodVerifier::CurrentInsnFlags() { |
| return &insn_flags_[work_insn_idx_]; |
| } |
| |
| const RegType& MethodVerifier::GetMethodReturnType() { |
| if (return_type_ == nullptr) { |
| if (mirror_method_ != NULL) { |
| MethodHelper mh(mirror_method_); |
| mirror::Class* return_type_class = mh.GetReturnType(can_load_classes_); |
| if (return_type_class != nullptr) { |
| return_type_ = ®_types_.FromClass(mh.GetReturnTypeDescriptor(), return_type_class, |
| return_type_class->CannotBeAssignedFromOtherTypes()); |
| } else { |
| Thread* self = Thread::Current(); |
| DCHECK(!can_load_classes_ || self->IsExceptionPending()); |
| self->ClearException(); |
| } |
| } |
| if (return_type_ == nullptr) { |
| const DexFile::MethodId& method_id = dex_file_->GetMethodId(dex_method_idx_); |
| const DexFile::ProtoId& proto_id = dex_file_->GetMethodPrototype(method_id); |
| uint16_t return_type_idx = proto_id.return_type_idx_; |
| const char* descriptor = dex_file_->GetTypeDescriptor(dex_file_->GetTypeId(return_type_idx)); |
| return_type_ = ®_types_.FromDescriptor(class_loader_->get(), descriptor, false); |
| } |
| } |
| return *return_type_; |
| } |
| |
| const RegType& MethodVerifier::GetDeclaringClass() { |
| if (declaring_class_ == NULL) { |
| const DexFile::MethodId& method_id = dex_file_->GetMethodId(dex_method_idx_); |
| const char* descriptor |
| = dex_file_->GetTypeDescriptor(dex_file_->GetTypeId(method_id.class_idx_)); |
| if (mirror_method_ != NULL) { |
| mirror::Class* klass = mirror_method_->GetDeclaringClass(); |
| declaring_class_ = ®_types_.FromClass(descriptor, klass, |
| klass->CannotBeAssignedFromOtherTypes()); |
| } else { |
| declaring_class_ = ®_types_.FromDescriptor(class_loader_->get(), descriptor, false); |
| } |
| } |
| return *declaring_class_; |
| } |
| |
| std::vector<int32_t> MethodVerifier::DescribeVRegs(uint32_t dex_pc) { |
| RegisterLine* line = reg_table_.GetLine(dex_pc); |
| std::vector<int32_t> result; |
| for (size_t i = 0; i < line->NumRegs(); ++i) { |
| const RegType& type = line->GetRegisterType(i); |
| if (type.IsConstant()) { |
| result.push_back(type.IsPreciseConstant() ? kConstant : kImpreciseConstant); |
| result.push_back(type.ConstantValue()); |
| } else if (type.IsConstantLo()) { |
| result.push_back(type.IsPreciseConstantLo() ? kConstant : kImpreciseConstant); |
| result.push_back(type.ConstantValueLo()); |
| } else if (type.IsConstantHi()) { |
| result.push_back(type.IsPreciseConstantHi() ? kConstant : kImpreciseConstant); |
| result.push_back(type.ConstantValueHi()); |
| } else if (type.IsIntegralTypes()) { |
| result.push_back(kIntVReg); |
| result.push_back(0); |
| } else if (type.IsFloat()) { |
| result.push_back(kFloatVReg); |
| result.push_back(0); |
| } else if (type.IsLong()) { |
| result.push_back(kLongLoVReg); |
| result.push_back(0); |
| result.push_back(kLongHiVReg); |
| result.push_back(0); |
| ++i; |
| } else if (type.IsDouble()) { |
| result.push_back(kDoubleLoVReg); |
| result.push_back(0); |
| result.push_back(kDoubleHiVReg); |
| result.push_back(0); |
| ++i; |
| } else if (type.IsUndefined() || type.IsConflict() || type.IsHighHalf()) { |
| result.push_back(kUndefined); |
| result.push_back(0); |
| } else { |
| CHECK(type.IsNonZeroReferenceTypes()); |
| result.push_back(kReferenceVReg); |
| result.push_back(0); |
| } |
| } |
| return result; |
| } |
| |
| const RegType& MethodVerifier::DetermineCat1Constant(int32_t value, bool precise) { |
| if (precise) { |
| // Precise constant type. |
| return reg_types_.FromCat1Const(value, true); |
| } else { |
| // Imprecise constant type. |
| if (value < -32768) { |
| return reg_types_.IntConstant(); |
| } else if (value < -128) { |
| return reg_types_.ShortConstant(); |
| } else if (value < 0) { |
| return reg_types_.ByteConstant(); |
| } else if (value == 0) { |
| return reg_types_.Zero(); |
| } else if (value == 1) { |
| return reg_types_.One(); |
| } else if (value < 128) { |
| return reg_types_.PosByteConstant(); |
| } else if (value < 32768) { |
| return reg_types_.PosShortConstant(); |
| } else if (value < 65536) { |
| return reg_types_.CharConstant(); |
| } else { |
| return reg_types_.IntConstant(); |
| } |
| } |
| } |
| |
| void MethodVerifier::Init() { |
| art::verifier::RegTypeCache::Init(); |
| } |
| |
| void MethodVerifier::Shutdown() { |
| verifier::RegTypeCache::ShutDown(); |
| } |
| |
| void MethodVerifier::VisitRoots(RootVisitor* visitor, void* arg) { |
| reg_types_.VisitRoots(visitor, arg); |
| } |
| |
| } // namespace verifier |
| } // namespace art |