runtime/arch/x86/fault_handler_x86.cc - LeafOS-Project/android_art - Gitiles

 /*
  * Copyright (C) 2008 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "fault_handler.h"

 #include <sys/ucontext.h>

 #include "arch/instruction_set.h"
 #include "art_method.h"
 #include "base/enums.h"
 #include "base/hex_dump.h"
 #include "base/logging.h"  // For VLOG.
 #include "base/macros.h"
 #include "base/safe_copy.h"
 #include "oat_quick_method_header.h"
 #include "runtime_globals.h"
 #include "thread-current-inl.h"

 #if defined(__APPLE__)
 #define ucontext __darwin_ucontext

 #if defined(__x86_64__)
 // 64 bit mac build.
 #define CTX_ESP uc_mcontext->__ss.__rsp
 #define CTX_EIP uc_mcontext->__ss.__rip
 #define CTX_EAX uc_mcontext->__ss.__rax
 #define CTX_METHOD uc_mcontext->__ss.__rdi
 #define CTX_RDI uc_mcontext->__ss.__rdi
 #define CTX_JMP_BUF uc_mcontext->__ss.__rdi
 #else
 // 32 bit mac build.
 #define CTX_ESP uc_mcontext->__ss.__esp
 #define CTX_EIP uc_mcontext->__ss.__eip
 #define CTX_EAX uc_mcontext->__ss.__eax
 #define CTX_METHOD uc_mcontext->__ss.__eax
 #define CTX_JMP_BUF uc_mcontext->__ss.__eax
 #endif

 #elif defined(__x86_64__)
 // 64 bit linux build.
 #define CTX_ESP uc_mcontext.gregs[REG_RSP]
 #define CTX_EIP uc_mcontext.gregs[REG_RIP]
 #define CTX_EAX uc_mcontext.gregs[REG_RAX]
 #define CTX_METHOD uc_mcontext.gregs[REG_RDI]
 #define CTX_RDI uc_mcontext.gregs[REG_RDI]
 #define CTX_JMP_BUF uc_mcontext.gregs[REG_RDI]
 #else
 // 32 bit linux build.
 #define CTX_ESP uc_mcontext.gregs[REG_ESP]
 #define CTX_EIP uc_mcontext.gregs[REG_EIP]
 #define CTX_EAX uc_mcontext.gregs[REG_EAX]
 #define CTX_METHOD uc_mcontext.gregs[REG_EAX]
 #define CTX_JMP_BUF uc_mcontext.gregs[REG_EAX]
 #endif

 //
 // X86 (and X86_64) specific fault handler functions.
 //

 namespace art {

 extern "C" void art_quick_throw_null_pointer_exception_from_signal();
 extern "C" void art_quick_throw_stack_overflow();
 extern "C" void art_quick_test_suspend();

 // Get the size of an instruction in bytes.
 // Return 0 if the instruction is not handled.
 static uint32_t GetInstructionSize(const uint8_t* pc, size_t bytes) {
 #define FETCH_OR_SKIP_BYTE(assignment)  \
   do {                                  \
     if (bytes == 0u) {                  \
       return 0u;                        \
     }                                   \
     (assignment);                       \
     ++pc;                               \
     --bytes;                            \
   } while (0)
 #define FETCH_BYTE(var) FETCH_OR_SKIP_BYTE((var) = *pc)
 #define SKIP_BYTE() FETCH_OR_SKIP_BYTE((void)0)

 #if defined(__x86_64)
   const bool x86_64 = true;
 #else
   const bool x86_64 = false;
 #endif

   const uint8_t* startpc = pc;

   uint8_t opcode;
   FETCH_BYTE(opcode);
   uint8_t modrm;
   bool has_modrm = false;
   bool two_byte = false;
   uint32_t displacement_size = 0;
   uint32_t immediate_size = 0;
   bool operand_size_prefix = false;

   // Prefixes.
   while (true) {
     bool prefix_present = false;
     switch (opcode) {
       // Group 3
       case 0x66:
         operand_size_prefix = true;
         FALLTHROUGH_INTENDED;

       // Group 1
       case 0xf0:
       case 0xf2:
       case 0xf3:

       // Group 2
       case 0x2e:
       case 0x36:
       case 0x3e:
       case 0x26:
       case 0x64:
       case 0x65:

       // Group 4
       case 0x67:
         FETCH_BYTE(opcode);
         prefix_present = true;
         break;
     }
     if (!prefix_present) {
       break;
     }
   }

   if (x86_64 && opcode >= 0x40 && opcode <= 0x4f) {
     FETCH_BYTE(opcode);
   }

   if (opcode == 0x0f) {
     // Two byte opcode
     two_byte = true;
     FETCH_BYTE(opcode);
   }

   bool unhandled_instruction = false;

   if (two_byte) {
     switch (opcode) {
       case 0x10:        // vmovsd/ss
       case 0x11:        // vmovsd/ss
       case 0xb6:        // movzx
       case 0xb7:
       case 0xbe:        // movsx
       case 0xbf:
         FETCH_BYTE(modrm);
         has_modrm = true;
         break;
       default:
         unhandled_instruction = true;
         break;
     }
   } else {
     switch (opcode) {
       case 0x88:        // mov byte
       case 0x89:        // mov
       case 0x8b:
       case 0x38:        // cmp with memory.
       case 0x39:
       case 0x3a:
       case 0x3b:
       case 0x3c:
       case 0x3d:
       case 0x85:        // test.
         FETCH_BYTE(modrm);
         has_modrm = true;
         break;

       case 0x80:        // group 1, byte immediate.
       case 0x83:
       case 0xc6:
         FETCH_BYTE(modrm);
         has_modrm = true;
         immediate_size = 1;
         break;

       case 0x81:        // group 1, word immediate.
       case 0xc7:        // mov
         FETCH_BYTE(modrm);
         has_modrm = true;
         immediate_size = operand_size_prefix ? 2 : 4;
         break;

       case 0xf6:
       case 0xf7:
         FETCH_BYTE(modrm);
         has_modrm = true;
         switch ((modrm >> 3) & 7) {  // Extract "reg/opcode" from "modr/m".
           case 0:  // test
             immediate_size = (opcode == 0xf6) ? 1 : (operand_size_prefix ? 2 : 4);
             break;
           case 2:  // not
           case 3:  // neg
           case 4:  // mul
           case 5:  // imul
           case 6:  // div
           case 7:  // idiv
             break;
           default:
             unhandled_instruction = true;
             break;
         }
         break;

       default:
         unhandled_instruction = true;
         break;
     }
   }

   if (unhandled_instruction) {
     VLOG(signals) << "Unhandled x86 instruction with opcode " << static_cast<int>(opcode);
     return 0;
   }

   if (has_modrm) {
     uint8_t mod = (modrm >> 6) & 3U /* 0b11 */;

     // Check for SIB.
     if (mod != 3U /* 0b11 */ && (modrm & 7U /* 0b111 */) == 4) {
       SKIP_BYTE();  // SIB
     }

     switch (mod) {
       case 0U /* 0b00 */: break;
       case 1U /* 0b01 */: displacement_size = 1; break;
       case 2U /* 0b10 */: displacement_size = 4; break;
       case 3U /* 0b11 */:
         break;
     }
   }

   // Skip displacement and immediate.
   pc += displacement_size + immediate_size;

   VLOG(signals) << "x86 instruction length calculated as " << (pc - startpc);
   return pc - startpc;

 #undef SKIP_BYTE
 #undef FETCH_BYTE
 #undef FETCH_OR_SKIP_BYTE
 }

 uintptr_t FaultManager::GetFaultPc([[maybe_unused]] siginfo_t* siginfo, void* context) {
   ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
   if (uc->CTX_ESP == 0) {
     VLOG(signals) << "Missing SP";
     return 0u;
   }
   return uc->CTX_EIP;
 }

 uintptr_t FaultManager::GetFaultSp(void* context) {
   ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
   return uc->CTX_ESP;
 }

 bool NullPointerHandler::Action(int, siginfo_t* sig, void* context) {
   uintptr_t fault_address = reinterpret_cast<uintptr_t>(sig->si_addr);
   if (!IsValidFaultAddress(fault_address)) {
     return false;
   }

   ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
   ArtMethod** sp = reinterpret_cast<ArtMethod**>(uc->CTX_ESP);
   ArtMethod* method = *sp;
   if (!IsValidMethod(method)) {
     return false;
   }

   // For null checks in compiled code we insert a stack map that is immediately
   // after the load/store instruction that might cause the fault and we need to
   // pass the return PC to the handler. For null checks in Nterp, we similarly
   // need the return PC to recognize that this was a null check in Nterp, so
   // that the handler can get the needed data from the Nterp frame.

   // Note: Allowing nested faults if `IsValidMethod()` returned a false positive.
   // Note: The `ArtMethod::GetOatQuickMethodHeader()` can acquire locks, which is
   // essentially unsafe in a signal handler, but we allow that here just like in
   // `NullPointerHandler::IsValidReturnPc()`. For more details see comments there.
   uintptr_t pc = uc->CTX_EIP;
   const OatQuickMethodHeader* method_header = method->GetOatQuickMethodHeader(pc);
   if (method_header == nullptr) {
     VLOG(signals) << "No method header.";
     return false;
   }
   const uint8_t* pc_ptr = reinterpret_cast<const uint8_t*>(pc);
   size_t offset = pc_ptr - method_header->GetCode();
   size_t code_size = method_header->GetCodeSize();
   CHECK_LT(offset, code_size);
   size_t max_instr_size = code_size - offset;
   uint32_t instr_size = GetInstructionSize(pc_ptr, max_instr_size);
   if (instr_size == 0u) {
     // Unknown instruction (can't really happen) or not enough bytes until end of method code.
     return false;
   }

   uintptr_t return_pc = reinterpret_cast<uintptr_t>(pc + instr_size);
   if (!IsValidReturnPc(sp, return_pc)) {
     return false;
   }

   // Push the return PC and fault address onto the stack.
   uintptr_t* next_sp = reinterpret_cast<uintptr_t*>(sp) - 2;
   next_sp[1] = return_pc;
   next_sp[0] = fault_address;
   uc->CTX_ESP = reinterpret_cast<uintptr_t>(next_sp);

   // Arrange for the signal handler to return to the NPE entrypoint.
   uc->CTX_EIP = reinterpret_cast<uintptr_t>(
       art_quick_throw_null_pointer_exception_from_signal);
   VLOG(signals) << "Generating null pointer exception";
   return true;
 }

 // A suspend check is done using the following instruction sequence:
 // (x86)
 // 0xf720f1df:         648B058C000000      mov     eax, fs:[0x8c]  ; suspend_trigger
 // .. some intervening instructions.
 // 0xf720f1e6:                   8500      test    eax, [eax]
 // (x86_64)
 // 0x7f579de45d9e: 65488B0425A8000000      movq    rax, gs:[0xa8]  ; suspend_trigger
 // .. some intervening instructions.
 // 0x7f579de45da7:               8500      test    eax, [eax]

 // The offset from fs is Thread::ThreadSuspendTriggerOffset().
 // To check for a suspend check, we examine the instructions that caused
 // the fault.
 bool SuspensionHandler::Action(int, siginfo_t*, void* context) {
   // These are the instructions to check for.  The first one is the mov eax, fs:[xxx]
   // where xxx is the offset of the suspend trigger.
   uint32_t trigger = Thread::ThreadSuspendTriggerOffset<kRuntimePointerSize>().Int32Value();

   VLOG(signals) << "Checking for suspension point";
 #if defined(__x86_64__)
   uint8_t checkinst1[] = {0x65, 0x48, 0x8b, 0x04, 0x25, static_cast<uint8_t>(trigger & 0xff),
       static_cast<uint8_t>((trigger >> 8) & 0xff), 0, 0};
 #else
   uint8_t checkinst1[] = {0x64, 0x8b, 0x05, static_cast<uint8_t>(trigger & 0xff),
       static_cast<uint8_t>((trigger >> 8) & 0xff), 0, 0};
 #endif
   uint8_t checkinst2[] = {0x85, 0x00};

   ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
   uint8_t* pc = reinterpret_cast<uint8_t*>(uc->CTX_EIP);
   uint8_t* sp = reinterpret_cast<uint8_t*>(uc->CTX_ESP);

   if (pc[0] != checkinst2[0] || pc[1] != checkinst2[1]) {
     // Second instruction is not correct (test eax,[eax]).
     VLOG(signals) << "Not a suspension point";
     return false;
   }

   // The first instruction can a little bit up the stream due to load hoisting
   // in the compiler.
   uint8_t* limit = pc - 100;   // Compiler will hoist to a max of 20 instructions.
   uint8_t* ptr = pc - sizeof(checkinst1);
   bool found = false;
   while (ptr > limit) {
     if (memcmp(ptr, checkinst1, sizeof(checkinst1)) == 0) {
       found = true;
       break;
     }
     ptr -= 1;
   }

   if (found) {
     VLOG(signals) << "suspend check match";

     // We need to arrange for the signal handler to return to the null pointer
     // exception generator.  The return address must be the address of the
     // next instruction (this instruction + 2).  The return address
     // is on the stack at the top address of the current frame.

     // Push the return address onto the stack.
     uintptr_t retaddr = reinterpret_cast<uintptr_t>(pc + 2);
     uintptr_t* next_sp = reinterpret_cast<uintptr_t*>(sp - sizeof(uintptr_t));
     *next_sp = retaddr;
     uc->CTX_ESP = reinterpret_cast<uintptr_t>(next_sp);

     uc->CTX_EIP = reinterpret_cast<uintptr_t>(art_quick_test_suspend);

     // Now remove the suspend trigger that caused this fault.
     Thread::Current()->RemoveSuspendTrigger();
     VLOG(signals) << "removed suspend trigger invoking test suspend";
     return true;
   }
   VLOG(signals) << "Not a suspend check match, first instruction mismatch";
   return false;
 }

 // The stack overflow check is done using the following instruction:
 // test eax, [esp+ -xxx]
 // where 'xxx' is the size of the overflow area.
 //
 // This is done before any frame is established in the method.  The return
 // address for the previous method is on the stack at ESP.

 bool StackOverflowHandler::Action(int, siginfo_t* info, void* context) {
   ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
   uintptr_t sp = static_cast<uintptr_t>(uc->CTX_ESP);

   uintptr_t fault_addr = reinterpret_cast<uintptr_t>(info->si_addr);
   VLOG(signals) << "fault_addr: " << std::hex << fault_addr;
   VLOG(signals) << "checking for stack overflow, sp: " << std::hex << sp <<
     ", fault_addr: " << fault_addr;

 #if defined(__x86_64__)
   uintptr_t overflow_addr = sp - GetStackOverflowReservedBytes(InstructionSet::kX86_64);
 #else
   uintptr_t overflow_addr = sp - GetStackOverflowReservedBytes(InstructionSet::kX86);
 #endif

   // Check that the fault address is the value expected for a stack overflow.
   if (fault_addr != overflow_addr) {
     VLOG(signals) << "Not a stack overflow";
     return false;
   }

   VLOG(signals) << "Stack overflow found";

   // Since the compiler puts the implicit overflow
   // check before the callee save instructions, the SP is already pointing to
   // the previous frame.

   // Now arrange for the signal handler to return to art_quick_throw_stack_overflow.
   uc->CTX_EIP = reinterpret_cast<uintptr_t>(art_quick_throw_stack_overflow);

   return true;
 }
 }       // namespace art
	/*
	* Copyright (C) 2008 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "fault_handler.h"

	#include <sys/ucontext.h>

	#include "arch/instruction_set.h"
	#include "art_method.h"
	#include "base/enums.h"
	#include "base/hex_dump.h"
	#include "base/logging.h" // For VLOG.
	#include "base/macros.h"
	#include "base/safe_copy.h"
	#include "oat_quick_method_header.h"
	#include "runtime_globals.h"
	#include "thread-current-inl.h"

	#if defined(__APPLE__)
	#define ucontext __darwin_ucontext

	#if defined(__x86_64__)
	// 64 bit mac build.
	#define CTX_ESP uc_mcontext->__ss.__rsp
	#define CTX_EIP uc_mcontext->__ss.__rip
	#define CTX_EAX uc_mcontext->__ss.__rax
	#define CTX_METHOD uc_mcontext->__ss.__rdi
	#define CTX_RDI uc_mcontext->__ss.__rdi
	#define CTX_JMP_BUF uc_mcontext->__ss.__rdi
	#else
	// 32 bit mac build.
	#define CTX_ESP uc_mcontext->__ss.__esp
	#define CTX_EIP uc_mcontext->__ss.__eip
	#define CTX_EAX uc_mcontext->__ss.__eax
	#define CTX_METHOD uc_mcontext->__ss.__eax
	#define CTX_JMP_BUF uc_mcontext->__ss.__eax
	#endif

	#elif defined(__x86_64__)
	// 64 bit linux build.
	#define CTX_ESP uc_mcontext.gregs[REG_RSP]
	#define CTX_EIP uc_mcontext.gregs[REG_RIP]
	#define CTX_EAX uc_mcontext.gregs[REG_RAX]
	#define CTX_METHOD uc_mcontext.gregs[REG_RDI]
	#define CTX_RDI uc_mcontext.gregs[REG_RDI]
	#define CTX_JMP_BUF uc_mcontext.gregs[REG_RDI]
	#else
	// 32 bit linux build.
	#define CTX_ESP uc_mcontext.gregs[REG_ESP]
	#define CTX_EIP uc_mcontext.gregs[REG_EIP]
	#define CTX_EAX uc_mcontext.gregs[REG_EAX]
	#define CTX_METHOD uc_mcontext.gregs[REG_EAX]
	#define CTX_JMP_BUF uc_mcontext.gregs[REG_EAX]
	#endif

	//
	// X86 (and X86_64) specific fault handler functions.
	//

	namespace art {

	extern "C" void art_quick_throw_null_pointer_exception_from_signal();
	extern "C" void art_quick_throw_stack_overflow();
	extern "C" void art_quick_test_suspend();

	// Get the size of an instruction in bytes.
	// Return 0 if the instruction is not handled.
	static uint32_t GetInstructionSize(const uint8_t* pc, size_t bytes) {
	#define FETCH_OR_SKIP_BYTE(assignment) \
	do { \
	if (bytes == 0u) { \
	return 0u; \
	} \
	(assignment); \
	++pc; \
	--bytes; \
	} while (0)
	#define FETCH_BYTE(var) FETCH_OR_SKIP_BYTE((var) = *pc)
	#define SKIP_BYTE() FETCH_OR_SKIP_BYTE((void)0)

	#if defined(__x86_64)
	const bool x86_64 = true;
	#else
	const bool x86_64 = false;
	#endif

	const uint8_t* startpc = pc;

	uint8_t opcode;
	FETCH_BYTE(opcode);
	uint8_t modrm;
	bool has_modrm = false;
	bool two_byte = false;
	uint32_t displacement_size = 0;
	uint32_t immediate_size = 0;
	bool operand_size_prefix = false;

	// Prefixes.
	while (true) {
	bool prefix_present = false;
	switch (opcode) {
	// Group 3
	case 0x66:
	operand_size_prefix = true;
	FALLTHROUGH_INTENDED;

	// Group 1
	case 0xf0:
	case 0xf2:
	case 0xf3:

	// Group 2
	case 0x2e:
	case 0x36:
	case 0x3e:
	case 0x26:
	case 0x64:
	case 0x65:

	// Group 4
	case 0x67:
	FETCH_BYTE(opcode);
	prefix_present = true;
	break;
	}
	if (!prefix_present) {
	break;
	}
	}

	if (x86_64 && opcode >= 0x40 && opcode <= 0x4f) {
	FETCH_BYTE(opcode);
	}

	if (opcode == 0x0f) {
	// Two byte opcode
	two_byte = true;
	FETCH_BYTE(opcode);
	}

	bool unhandled_instruction = false;

	if (two_byte) {
	switch (opcode) {
	case 0x10: // vmovsd/ss
	case 0x11: // vmovsd/ss
	case 0xb6: // movzx
	case 0xb7:
	case 0xbe: // movsx
	case 0xbf:
	FETCH_BYTE(modrm);
	has_modrm = true;
	break;
	default:
	unhandled_instruction = true;
	break;
	}
	} else {
	switch (opcode) {
	case 0x88: // mov byte
	case 0x89: // mov
	case 0x8b:
	case 0x38: // cmp with memory.
	case 0x39:
	case 0x3a:
	case 0x3b:
	case 0x3c:
	case 0x3d:
	case 0x85: // test.
	FETCH_BYTE(modrm);
	has_modrm = true;
	break;

	case 0x80: // group 1, byte immediate.
	case 0x83:
	case 0xc6:
	FETCH_BYTE(modrm);
	has_modrm = true;
	immediate_size = 1;
	break;

	case 0x81: // group 1, word immediate.
	case 0xc7: // mov
	FETCH_BYTE(modrm);
	has_modrm = true;
	immediate_size = operand_size_prefix ? 2 : 4;
	break;

	case 0xf6:
	case 0xf7:
	FETCH_BYTE(modrm);
	has_modrm = true;
	switch ((modrm >> 3) & 7) { // Extract "reg/opcode" from "modr/m".
	case 0: // test
	immediate_size = (opcode == 0xf6) ? 1 : (operand_size_prefix ? 2 : 4);
	break;
	case 2: // not
	case 3: // neg
	case 4: // mul
	case 5: // imul
	case 6: // div
	case 7: // idiv
	break;
	default:
	unhandled_instruction = true;
	break;
	}
	break;

	default:
	unhandled_instruction = true;
	break;
	}
	}

	if (unhandled_instruction) {
	VLOG(signals) << "Unhandled x86 instruction with opcode " << static_cast<int>(opcode);
	return 0;
	}

	if (has_modrm) {
	uint8_t mod = (modrm >> 6) & 3U /* 0b11 */;

	// Check for SIB.
	if (mod != 3U /* 0b11 / && (modrm & 7U / 0b111 */) == 4) {
	SKIP_BYTE(); // SIB
	}

	switch (mod) {
	case 0U /* 0b00 */: break;
	case 1U /* 0b01 */: displacement_size = 1; break;
	case 2U /* 0b10 */: displacement_size = 4; break;
	case 3U /* 0b11 */:
	break;
	}
	}

	// Skip displacement and immediate.
	pc += displacement_size + immediate_size;

	VLOG(signals) << "x86 instruction length calculated as " << (pc - startpc);
	return pc - startpc;

	#undef SKIP_BYTE
	#undef FETCH_BYTE
	#undef FETCH_OR_SKIP_BYTE
	}

	uintptr_t FaultManager::GetFaultPc([[maybe_unused]] siginfo_t* siginfo, void* context) {
	ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
	if (uc->CTX_ESP == 0) {
	VLOG(signals) << "Missing SP";
	return 0u;
	}
	return uc->CTX_EIP;
	}

	uintptr_t FaultManager::GetFaultSp(void* context) {
	ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
	return uc->CTX_ESP;
	}

	bool NullPointerHandler::Action(int, siginfo_t* sig, void* context) {
	uintptr_t fault_address = reinterpret_cast<uintptr_t>(sig->si_addr);
	if (!IsValidFaultAddress(fault_address)) {
	return false;
	}

	ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
	ArtMethod sp = reinterpret_cast<ArtMethod>(uc->CTX_ESP);
	ArtMethod* method = *sp;
	if (!IsValidMethod(method)) {
	return false;
	}

	// For null checks in compiled code we insert a stack map that is immediately
	// after the load/store instruction that might cause the fault and we need to
	// pass the return PC to the handler. For null checks in Nterp, we similarly
	// need the return PC to recognize that this was a null check in Nterp, so
	// that the handler can get the needed data from the Nterp frame.

	// Note: Allowing nested faults if `IsValidMethod()` returned a false positive.
	// Note: The `ArtMethod::GetOatQuickMethodHeader()` can acquire locks, which is
	// essentially unsafe in a signal handler, but we allow that here just like in
	// `NullPointerHandler::IsValidReturnPc()`. For more details see comments there.
	uintptr_t pc = uc->CTX_EIP;
	const OatQuickMethodHeader* method_header = method->GetOatQuickMethodHeader(pc);
	if (method_header == nullptr) {
	VLOG(signals) << "No method header.";
	return false;
	}
	const uint8_t* pc_ptr = reinterpret_cast<const uint8_t*>(pc);
	size_t offset = pc_ptr - method_header->GetCode();
	size_t code_size = method_header->GetCodeSize();
	CHECK_LT(offset, code_size);
	size_t max_instr_size = code_size - offset;
	uint32_t instr_size = GetInstructionSize(pc_ptr, max_instr_size);
	if (instr_size == 0u) {
	// Unknown instruction (can't really happen) or not enough bytes until end of method code.
	return false;
	}

	uintptr_t return_pc = reinterpret_cast<uintptr_t>(pc + instr_size);
	if (!IsValidReturnPc(sp, return_pc)) {
	return false;
	}

	// Push the return PC and fault address onto the stack.
	uintptr_t* next_sp = reinterpret_cast<uintptr_t*>(sp) - 2;
	next_sp[1] = return_pc;
	next_sp[0] = fault_address;
	uc->CTX_ESP = reinterpret_cast<uintptr_t>(next_sp);

	// Arrange for the signal handler to return to the NPE entrypoint.
	uc->CTX_EIP = reinterpret_cast<uintptr_t>(
	art_quick_throw_null_pointer_exception_from_signal);
	VLOG(signals) << "Generating null pointer exception";
	return true;
	}

	// A suspend check is done using the following instruction sequence:
	// (x86)
	// 0xf720f1df: 648B058C000000 mov eax, fs:[0x8c] ; suspend_trigger
	// .. some intervening instructions.
	// 0xf720f1e6: 8500 test eax, [eax]
	// (x86_64)
	// 0x7f579de45d9e: 65488B0425A8000000 movq rax, gs:[0xa8] ; suspend_trigger
	// .. some intervening instructions.
	// 0x7f579de45da7: 8500 test eax, [eax]

	// The offset from fs is Thread::ThreadSuspendTriggerOffset().
	// To check for a suspend check, we examine the instructions that caused
	// the fault.
	bool SuspensionHandler::Action(int, siginfo_t, void context) {
	// These are the instructions to check for. The first one is the mov eax, fs:[xxx]
	// where xxx is the offset of the suspend trigger.
	uint32_t trigger = Thread::ThreadSuspendTriggerOffset<kRuntimePointerSize>().Int32Value();

	VLOG(signals) << "Checking for suspension point";
	#if defined(__x86_64__)
	uint8_t checkinst1[] = {0x65, 0x48, 0x8b, 0x04, 0x25, static_cast<uint8_t>(trigger & 0xff),
	static_cast<uint8_t>((trigger >> 8) & 0xff), 0, 0};
	#else
	uint8_t checkinst1[] = {0x64, 0x8b, 0x05, static_cast<uint8_t>(trigger & 0xff),
	static_cast<uint8_t>((trigger >> 8) & 0xff), 0, 0};
	#endif
	uint8_t checkinst2[] = {0x85, 0x00};

	ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
	uint8_t* pc = reinterpret_cast<uint8_t*>(uc->CTX_EIP);
	uint8_t* sp = reinterpret_cast<uint8_t*>(uc->CTX_ESP);

	if (pc[0] != checkinst2[0] \|\| pc[1] != checkinst2[1]) {
	// Second instruction is not correct (test eax,[eax]).
	VLOG(signals) << "Not a suspension point";
	return false;
	}

	// The first instruction can a little bit up the stream due to load hoisting
	// in the compiler.
	uint8_t* limit = pc - 100; // Compiler will hoist to a max of 20 instructions.
	uint8_t* ptr = pc - sizeof(checkinst1);
	bool found = false;
	while (ptr > limit) {
	if (memcmp(ptr, checkinst1, sizeof(checkinst1)) == 0) {
	found = true;
	break;
	}
	ptr -= 1;
	}

	if (found) {
	VLOG(signals) << "suspend check match";

	// We need to arrange for the signal handler to return to the null pointer
	// exception generator. The return address must be the address of the
	// next instruction (this instruction + 2). The return address
	// is on the stack at the top address of the current frame.

	// Push the return address onto the stack.
	uintptr_t retaddr = reinterpret_cast<uintptr_t>(pc + 2);
	uintptr_t* next_sp = reinterpret_cast<uintptr_t*>(sp - sizeof(uintptr_t));
	*next_sp = retaddr;
	uc->CTX_ESP = reinterpret_cast<uintptr_t>(next_sp);

	uc->CTX_EIP = reinterpret_cast<uintptr_t>(art_quick_test_suspend);

	// Now remove the suspend trigger that caused this fault.
	Thread::Current()->RemoveSuspendTrigger();
	VLOG(signals) << "removed suspend trigger invoking test suspend";
	return true;
	}
	VLOG(signals) << "Not a suspend check match, first instruction mismatch";
	return false;
	}

	// The stack overflow check is done using the following instruction:
	// test eax, [esp+ -xxx]
	// where 'xxx' is the size of the overflow area.
	//
	// This is done before any frame is established in the method. The return
	// address for the previous method is on the stack at ESP.

	bool StackOverflowHandler::Action(int, siginfo_t* info, void* context) {
	ucontext_t* uc = reinterpret_cast<ucontext_t*>(context);
	uintptr_t sp = static_cast<uintptr_t>(uc->CTX_ESP);

	uintptr_t fault_addr = reinterpret_cast<uintptr_t>(info->si_addr);
	VLOG(signals) << "fault_addr: " << std::hex << fault_addr;
	VLOG(signals) << "checking for stack overflow, sp: " << std::hex << sp <<
	", fault_addr: " << fault_addr;

	#if defined(__x86_64__)
	uintptr_t overflow_addr = sp - GetStackOverflowReservedBytes(InstructionSet::kX86_64);
	#else
	uintptr_t overflow_addr = sp - GetStackOverflowReservedBytes(InstructionSet::kX86);
	#endif

	// Check that the fault address is the value expected for a stack overflow.
	if (fault_addr != overflow_addr) {
	VLOG(signals) << "Not a stack overflow";
	return false;
	}

	VLOG(signals) << "Stack overflow found";

	// Since the compiler puts the implicit overflow
	// check before the callee save instructions, the SP is already pointing to
	// the previous frame.

	// Now arrange for the signal handler to return to art_quick_throw_stack_overflow.
	uc->CTX_EIP = reinterpret_cast<uintptr_t>(art_quick_throw_stack_overflow);

	return true;
	}
	} // namespace art