| /* |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "base/stl_util.h" |
| #include "compiler_internals.h" |
| #include "dex_file-inl.h" |
| #include "leb128.h" |
| #include "mir_graph.h" |
| |
| namespace art { |
| |
| #define MAX_PATTERN_LEN 5 |
| |
| struct CodePattern { |
| const Instruction::Code opcodes[MAX_PATTERN_LEN]; |
| const SpecialCaseHandler handler_code; |
| }; |
| |
| static const CodePattern special_patterns[] = { |
| {{Instruction::RETURN_VOID}, kNullMethod}, |
| {{Instruction::CONST, Instruction::RETURN}, kConstFunction}, |
| {{Instruction::CONST_4, Instruction::RETURN}, kConstFunction}, |
| {{Instruction::CONST_4, Instruction::RETURN_OBJECT}, kConstFunction}, |
| {{Instruction::CONST_16, Instruction::RETURN}, kConstFunction}, |
| {{Instruction::IGET, Instruction:: RETURN}, kIGet}, |
| {{Instruction::IGET_BOOLEAN, Instruction::RETURN}, kIGetBoolean}, |
| {{Instruction::IGET_OBJECT, Instruction::RETURN_OBJECT}, kIGetObject}, |
| {{Instruction::IGET_BYTE, Instruction::RETURN}, kIGetByte}, |
| {{Instruction::IGET_CHAR, Instruction::RETURN}, kIGetChar}, |
| {{Instruction::IGET_SHORT, Instruction::RETURN}, kIGetShort}, |
| {{Instruction::IGET_WIDE, Instruction::RETURN_WIDE}, kIGetWide}, |
| {{Instruction::IPUT, Instruction::RETURN_VOID}, kIPut}, |
| {{Instruction::IPUT_BOOLEAN, Instruction::RETURN_VOID}, kIPutBoolean}, |
| {{Instruction::IPUT_OBJECT, Instruction::RETURN_VOID}, kIPutObject}, |
| {{Instruction::IPUT_BYTE, Instruction::RETURN_VOID}, kIPutByte}, |
| {{Instruction::IPUT_CHAR, Instruction::RETURN_VOID}, kIPutChar}, |
| {{Instruction::IPUT_SHORT, Instruction::RETURN_VOID}, kIPutShort}, |
| {{Instruction::IPUT_WIDE, Instruction::RETURN_VOID}, kIPutWide}, |
| {{Instruction::RETURN}, kIdentity}, |
| {{Instruction::RETURN_OBJECT}, kIdentity}, |
| {{Instruction::RETURN_WIDE}, kIdentity}, |
| }; |
| |
| const char* MIRGraph::extended_mir_op_names_[kMirOpLast - kMirOpFirst] = { |
| "Phi", |
| "Copy", |
| "FusedCmplFloat", |
| "FusedCmpgFloat", |
| "FusedCmplDouble", |
| "FusedCmpgDouble", |
| "FusedCmpLong", |
| "Nop", |
| "OpNullCheck", |
| "OpRangeCheck", |
| "OpDivZeroCheck", |
| "Check1", |
| "Check2", |
| "Select", |
| }; |
| |
| MIRGraph::MIRGraph(CompilationUnit* cu, ArenaAllocator* arena) |
| : reg_location_(NULL), |
| compiler_temps_(arena, 6, kGrowableArrayMisc), |
| cu_(cu), |
| ssa_base_vregs_(NULL), |
| ssa_subscripts_(NULL), |
| vreg_to_ssa_map_(NULL), |
| ssa_last_defs_(NULL), |
| is_constant_v_(NULL), |
| constant_values_(NULL), |
| use_counts_(arena, 256, kGrowableArrayMisc), |
| raw_use_counts_(arena, 256, kGrowableArrayMisc), |
| num_reachable_blocks_(0), |
| dfs_order_(NULL), |
| dfs_post_order_(NULL), |
| dom_post_order_traversal_(NULL), |
| i_dom_list_(NULL), |
| def_block_matrix_(NULL), |
| temp_block_v_(NULL), |
| temp_dalvik_register_v_(NULL), |
| temp_ssa_register_v_(NULL), |
| block_list_(arena, 100, kGrowableArrayBlockList), |
| try_block_addr_(NULL), |
| entry_block_(NULL), |
| exit_block_(NULL), |
| cur_block_(NULL), |
| num_blocks_(0), |
| current_code_item_(NULL), |
| block_map_(arena, 0, kGrowableArrayMisc), |
| current_method_(kInvalidEntry), |
| current_offset_(kInvalidEntry), |
| def_count_(0), |
| opcode_count_(NULL), |
| num_ssa_regs_(0), |
| method_sreg_(0), |
| attributes_(METHOD_IS_LEAF), // Start with leaf assumption, change on encountering invoke. |
| checkstats_(NULL), |
| special_case_(kNoHandler), |
| arena_(arena) { |
| try_block_addr_ = new (arena_) ArenaBitVector(arena_, 0, true /* expandable */); |
| } |
| |
| MIRGraph::~MIRGraph() { |
| STLDeleteElements(&m_units_); |
| } |
| |
| /* |
| * Parse an instruction, return the length of the instruction |
| */ |
| int MIRGraph::ParseInsn(const uint16_t* code_ptr, DecodedInstruction* decoded_instruction) { |
| const Instruction* instruction = Instruction::At(code_ptr); |
| *decoded_instruction = DecodedInstruction(instruction); |
| |
| return instruction->SizeInCodeUnits(); |
| } |
| |
| |
| /* Split an existing block from the specified code offset into two */ |
| BasicBlock* MIRGraph::SplitBlock(unsigned int code_offset, |
| BasicBlock* orig_block, BasicBlock** immed_pred_block_p) { |
| MIR* insn = orig_block->first_mir_insn; |
| while (insn) { |
| if (insn->offset == code_offset) break; |
| insn = insn->next; |
| } |
| if (insn == NULL) { |
| LOG(FATAL) << "Break split failed"; |
| } |
| BasicBlock *bottom_block = NewMemBB(kDalvikByteCode, num_blocks_++); |
| block_list_.Insert(bottom_block); |
| |
| bottom_block->start_offset = code_offset; |
| bottom_block->first_mir_insn = insn; |
| bottom_block->last_mir_insn = orig_block->last_mir_insn; |
| |
| /* If this block was terminated by a return, the flag needs to go with the bottom block */ |
| bottom_block->terminated_by_return = orig_block->terminated_by_return; |
| orig_block->terminated_by_return = false; |
| |
| /* Add it to the quick lookup cache */ |
| block_map_.Put(bottom_block->start_offset, bottom_block); |
| |
| /* Handle the taken path */ |
| bottom_block->taken = orig_block->taken; |
| if (bottom_block->taken) { |
| orig_block->taken = NULL; |
| bottom_block->taken->predecessors->Delete(orig_block); |
| bottom_block->taken->predecessors->Insert(bottom_block); |
| } |
| |
| /* Handle the fallthrough path */ |
| bottom_block->fall_through = orig_block->fall_through; |
| orig_block->fall_through = bottom_block; |
| bottom_block->predecessors->Insert(orig_block); |
| if (bottom_block->fall_through) { |
| bottom_block->fall_through->predecessors->Delete(orig_block); |
| bottom_block->fall_through->predecessors->Insert(bottom_block); |
| } |
| |
| /* Handle the successor list */ |
| if (orig_block->successor_block_list.block_list_type != kNotUsed) { |
| bottom_block->successor_block_list = orig_block->successor_block_list; |
| orig_block->successor_block_list.block_list_type = kNotUsed; |
| GrowableArray<SuccessorBlockInfo*>::Iterator iterator(bottom_block->successor_block_list.blocks); |
| while (true) { |
| SuccessorBlockInfo *successor_block_info = iterator.Next(); |
| if (successor_block_info == NULL) break; |
| BasicBlock *bb = successor_block_info->block; |
| bb->predecessors->Delete(orig_block); |
| bb->predecessors->Insert(bottom_block); |
| } |
| } |
| |
| orig_block->last_mir_insn = insn->prev; |
| |
| insn->prev->next = NULL; |
| insn->prev = NULL; |
| /* |
| * Update the immediate predecessor block pointer so that outgoing edges |
| * can be applied to the proper block. |
| */ |
| if (immed_pred_block_p) { |
| DCHECK_EQ(*immed_pred_block_p, orig_block); |
| *immed_pred_block_p = bottom_block; |
| } |
| return bottom_block; |
| } |
| |
| /* |
| * Given a code offset, find out the block that starts with it. If the offset |
| * is in the middle of an existing block, split it into two. If immed_pred_block_p |
| * is not non-null and is the block being split, update *immed_pred_block_p to |
| * point to the bottom block so that outgoing edges can be set up properly |
| * (by the caller) |
| * Utilizes a map for fast lookup of the typical cases. |
| */ |
| BasicBlock* MIRGraph::FindBlock(unsigned int code_offset, bool split, bool create, |
| BasicBlock** immed_pred_block_p) { |
| BasicBlock* bb; |
| unsigned int i; |
| |
| if (code_offset >= cu_->code_item->insns_size_in_code_units_) { |
| return NULL; |
| } |
| bb = block_map_.Get(code_offset); |
| if ((bb != NULL) || !create) { |
| return bb; |
| } |
| |
| if (split) { |
| for (i = block_list_.Size(); i > 0; i--) { |
| bb = block_list_.Get(i - 1); |
| if (bb->block_type != kDalvikByteCode) continue; |
| /* Check if a branch jumps into the middle of an existing block */ |
| if ((code_offset > bb->start_offset) && (bb->last_mir_insn != NULL) && |
| (code_offset <= bb->last_mir_insn->offset)) { |
| BasicBlock *new_bb = SplitBlock(code_offset, bb, bb == *immed_pred_block_p ? |
| immed_pred_block_p : NULL); |
| return new_bb; |
| } |
| } |
| } |
| |
| /* Create a new one */ |
| bb = NewMemBB(kDalvikByteCode, num_blocks_++); |
| block_list_.Insert(bb); |
| bb->start_offset = code_offset; |
| block_map_.Put(bb->start_offset, bb); |
| return bb; |
| } |
| |
| /* Identify code range in try blocks and set up the empty catch blocks */ |
| void MIRGraph::ProcessTryCatchBlocks() { |
| int tries_size = current_code_item_->tries_size_; |
| int offset; |
| |
| if (tries_size == 0) { |
| return; |
| } |
| |
| for (int i = 0; i < tries_size; i++) { |
| const DexFile::TryItem* pTry = |
| DexFile::GetTryItems(*current_code_item_, i); |
| int start_offset = pTry->start_addr_; |
| int end_offset = start_offset + pTry->insn_count_; |
| for (offset = start_offset; offset < end_offset; offset++) { |
| try_block_addr_->SetBit(offset); |
| } |
| } |
| |
| // Iterate over each of the handlers to enqueue the empty Catch blocks |
| const byte* handlers_ptr = DexFile::GetCatchHandlerData(*current_code_item_, 0); |
| uint32_t handlers_size = DecodeUnsignedLeb128(&handlers_ptr); |
| for (uint32_t idx = 0; idx < handlers_size; idx++) { |
| CatchHandlerIterator iterator(handlers_ptr); |
| for (; iterator.HasNext(); iterator.Next()) { |
| uint32_t address = iterator.GetHandlerAddress(); |
| FindBlock(address, false /* split */, true /*create*/, |
| /* immed_pred_block_p */ NULL); |
| } |
| handlers_ptr = iterator.EndDataPointer(); |
| } |
| } |
| |
| /* Process instructions with the kBranch flag */ |
| BasicBlock* MIRGraph::ProcessCanBranch(BasicBlock* cur_block, MIR* insn, int cur_offset, int width, |
| int flags, const uint16_t* code_ptr, |
| const uint16_t* code_end) { |
| int target = cur_offset; |
| switch (insn->dalvikInsn.opcode) { |
| case Instruction::GOTO: |
| case Instruction::GOTO_16: |
| case Instruction::GOTO_32: |
| target += insn->dalvikInsn.vA; |
| break; |
| case Instruction::IF_EQ: |
| case Instruction::IF_NE: |
| case Instruction::IF_LT: |
| case Instruction::IF_GE: |
| case Instruction::IF_GT: |
| case Instruction::IF_LE: |
| cur_block->conditional_branch = true; |
| target += insn->dalvikInsn.vC; |
| break; |
| case Instruction::IF_EQZ: |
| case Instruction::IF_NEZ: |
| case Instruction::IF_LTZ: |
| case Instruction::IF_GEZ: |
| case Instruction::IF_GTZ: |
| case Instruction::IF_LEZ: |
| cur_block->conditional_branch = true; |
| target += insn->dalvikInsn.vB; |
| break; |
| default: |
| LOG(FATAL) << "Unexpected opcode(" << insn->dalvikInsn.opcode << ") with kBranch set"; |
| } |
| BasicBlock *taken_block = FindBlock(target, /* split */ true, /* create */ true, |
| /* immed_pred_block_p */ &cur_block); |
| cur_block->taken = taken_block; |
| taken_block->predecessors->Insert(cur_block); |
| |
| /* Always terminate the current block for conditional branches */ |
| if (flags & Instruction::kContinue) { |
| BasicBlock *fallthrough_block = FindBlock(cur_offset + width, |
| /* |
| * If the method is processed |
| * in sequential order from the |
| * beginning, we don't need to |
| * specify split for continue |
| * blocks. However, this |
| * routine can be called by |
| * compileLoop, which starts |
| * parsing the method from an |
| * arbitrary address in the |
| * method body. |
| */ |
| true, |
| /* create */ |
| true, |
| /* immed_pred_block_p */ |
| &cur_block); |
| cur_block->fall_through = fallthrough_block; |
| fallthrough_block->predecessors->Insert(cur_block); |
| } else if (code_ptr < code_end) { |
| FindBlock(cur_offset + width, /* split */ false, /* create */ true, |
| /* immed_pred_block_p */ NULL); |
| } |
| return cur_block; |
| } |
| |
| /* Process instructions with the kSwitch flag */ |
| void MIRGraph::ProcessCanSwitch(BasicBlock* cur_block, MIR* insn, int cur_offset, int width, |
| int flags) { |
| const uint16_t* switch_data = |
| reinterpret_cast<const uint16_t*>(GetCurrentInsns() + cur_offset + insn->dalvikInsn.vB); |
| int size; |
| const int* keyTable; |
| const int* target_table; |
| int i; |
| int first_key; |
| |
| /* |
| * Packed switch data format: |
| * ushort ident = 0x0100 magic value |
| * ushort size number of entries in the table |
| * int first_key first (and lowest) switch case value |
| * int targets[size] branch targets, relative to switch opcode |
| * |
| * Total size is (4+size*2) 16-bit code units. |
| */ |
| if (insn->dalvikInsn.opcode == Instruction::PACKED_SWITCH) { |
| DCHECK_EQ(static_cast<int>(switch_data[0]), |
| static_cast<int>(Instruction::kPackedSwitchSignature)); |
| size = switch_data[1]; |
| first_key = switch_data[2] | (switch_data[3] << 16); |
| target_table = reinterpret_cast<const int*>(&switch_data[4]); |
| keyTable = NULL; // Make the compiler happy |
| /* |
| * Sparse switch data format: |
| * ushort ident = 0x0200 magic value |
| * ushort size number of entries in the table; > 0 |
| * int keys[size] keys, sorted low-to-high; 32-bit aligned |
| * int targets[size] branch targets, relative to switch opcode |
| * |
| * Total size is (2+size*4) 16-bit code units. |
| */ |
| } else { |
| DCHECK_EQ(static_cast<int>(switch_data[0]), |
| static_cast<int>(Instruction::kSparseSwitchSignature)); |
| size = switch_data[1]; |
| keyTable = reinterpret_cast<const int*>(&switch_data[2]); |
| target_table = reinterpret_cast<const int*>(&switch_data[2 + size*2]); |
| first_key = 0; // To make the compiler happy |
| } |
| |
| if (cur_block->successor_block_list.block_list_type != kNotUsed) { |
| LOG(FATAL) << "Successor block list already in use: " |
| << static_cast<int>(cur_block->successor_block_list.block_list_type); |
| } |
| cur_block->successor_block_list.block_list_type = |
| (insn->dalvikInsn.opcode == Instruction::PACKED_SWITCH) ? |
| kPackedSwitch : kSparseSwitch; |
| cur_block->successor_block_list.blocks = |
| new (arena_) GrowableArray<SuccessorBlockInfo*>(arena_, size, kGrowableArraySuccessorBlocks); |
| |
| for (i = 0; i < size; i++) { |
| BasicBlock *case_block = FindBlock(cur_offset + target_table[i], /* split */ true, |
| /* create */ true, /* immed_pred_block_p */ &cur_block); |
| SuccessorBlockInfo *successor_block_info = |
| static_cast<SuccessorBlockInfo*>(arena_->Alloc(sizeof(SuccessorBlockInfo), |
| ArenaAllocator::kAllocSuccessor)); |
| successor_block_info->block = case_block; |
| successor_block_info->key = |
| (insn->dalvikInsn.opcode == Instruction::PACKED_SWITCH) ? |
| first_key + i : keyTable[i]; |
| cur_block->successor_block_list.blocks->Insert(successor_block_info); |
| case_block->predecessors->Insert(cur_block); |
| } |
| |
| /* Fall-through case */ |
| BasicBlock* fallthrough_block = FindBlock(cur_offset + width, /* split */ false, |
| /* create */ true, /* immed_pred_block_p */ NULL); |
| cur_block->fall_through = fallthrough_block; |
| fallthrough_block->predecessors->Insert(cur_block); |
| } |
| |
| /* Process instructions with the kThrow flag */ |
| BasicBlock* MIRGraph::ProcessCanThrow(BasicBlock* cur_block, MIR* insn, int cur_offset, int width, |
| int flags, ArenaBitVector* try_block_addr, |
| const uint16_t* code_ptr, const uint16_t* code_end) { |
| bool in_try_block = try_block_addr->IsBitSet(cur_offset); |
| |
| /* In try block */ |
| if (in_try_block) { |
| CatchHandlerIterator iterator(*current_code_item_, cur_offset); |
| |
| if (cur_block->successor_block_list.block_list_type != kNotUsed) { |
| LOG(INFO) << PrettyMethod(cu_->method_idx, *cu_->dex_file); |
| LOG(FATAL) << "Successor block list already in use: " |
| << static_cast<int>(cur_block->successor_block_list.block_list_type); |
| } |
| |
| cur_block->successor_block_list.block_list_type = kCatch; |
| cur_block->successor_block_list.blocks = |
| new (arena_) GrowableArray<SuccessorBlockInfo*>(arena_, 2, kGrowableArraySuccessorBlocks); |
| |
| for (; iterator.HasNext(); iterator.Next()) { |
| BasicBlock *catch_block = FindBlock(iterator.GetHandlerAddress(), false /* split*/, |
| false /* creat */, NULL /* immed_pred_block_p */); |
| catch_block->catch_entry = true; |
| if (kIsDebugBuild) { |
| catches_.insert(catch_block->start_offset); |
| } |
| SuccessorBlockInfo *successor_block_info = reinterpret_cast<SuccessorBlockInfo*> |
| (arena_->Alloc(sizeof(SuccessorBlockInfo), ArenaAllocator::kAllocSuccessor)); |
| successor_block_info->block = catch_block; |
| successor_block_info->key = iterator.GetHandlerTypeIndex(); |
| cur_block->successor_block_list.blocks->Insert(successor_block_info); |
| catch_block->predecessors->Insert(cur_block); |
| } |
| } else { |
| BasicBlock *eh_block = NewMemBB(kExceptionHandling, num_blocks_++); |
| cur_block->taken = eh_block; |
| block_list_.Insert(eh_block); |
| eh_block->start_offset = cur_offset; |
| eh_block->predecessors->Insert(cur_block); |
| } |
| |
| if (insn->dalvikInsn.opcode == Instruction::THROW) { |
| cur_block->explicit_throw = true; |
| if (code_ptr < code_end) { |
| // Force creation of new block following THROW via side-effect |
| FindBlock(cur_offset + width, /* split */ false, /* create */ true, |
| /* immed_pred_block_p */ NULL); |
| } |
| if (!in_try_block) { |
| // Don't split a THROW that can't rethrow - we're done. |
| return cur_block; |
| } |
| } |
| |
| /* |
| * Split the potentially-throwing instruction into two parts. |
| * The first half will be a pseudo-op that captures the exception |
| * edges and terminates the basic block. It always falls through. |
| * Then, create a new basic block that begins with the throwing instruction |
| * (minus exceptions). Note: this new basic block must NOT be entered into |
| * the block_map. If the potentially-throwing instruction is the target of a |
| * future branch, we need to find the check psuedo half. The new |
| * basic block containing the work portion of the instruction should |
| * only be entered via fallthrough from the block containing the |
| * pseudo exception edge MIR. Note also that this new block is |
| * not automatically terminated after the work portion, and may |
| * contain following instructions. |
| */ |
| BasicBlock *new_block = NewMemBB(kDalvikByteCode, num_blocks_++); |
| block_list_.Insert(new_block); |
| new_block->start_offset = insn->offset; |
| cur_block->fall_through = new_block; |
| new_block->predecessors->Insert(cur_block); |
| MIR* new_insn = static_cast<MIR*>(arena_->Alloc(sizeof(MIR), ArenaAllocator::kAllocMIR)); |
| *new_insn = *insn; |
| insn->dalvikInsn.opcode = |
| static_cast<Instruction::Code>(kMirOpCheck); |
| // Associate the two halves |
| insn->meta.throw_insn = new_insn; |
| new_insn->meta.throw_insn = insn; |
| AppendMIR(new_block, new_insn); |
| return new_block; |
| } |
| |
| /* Parse a Dex method and insert it into the MIRGraph at the current insert point. */ |
| void MIRGraph::InlineMethod(const DexFile::CodeItem* code_item, uint32_t access_flags, |
| InvokeType invoke_type, uint32_t class_def_idx, |
| uint32_t method_idx, jobject class_loader, const DexFile& dex_file) { |
| current_code_item_ = code_item; |
| method_stack_.push_back(std::make_pair(current_method_, current_offset_)); |
| current_method_ = m_units_.size(); |
| current_offset_ = 0; |
| // TODO: will need to snapshot stack image and use that as the mir context identification. |
| m_units_.push_back(new DexCompilationUnit(cu_, class_loader, Runtime::Current()->GetClassLinker(), |
| dex_file, current_code_item_, class_def_idx, method_idx, access_flags)); |
| const uint16_t* code_ptr = current_code_item_->insns_; |
| const uint16_t* code_end = |
| current_code_item_->insns_ + current_code_item_->insns_size_in_code_units_; |
| |
| // TODO: need to rework expansion of block list & try_block_addr when inlining activated. |
| block_list_.Resize(block_list_.Size() + current_code_item_->insns_size_in_code_units_); |
| block_map_.SetSize(block_map_.Size() + current_code_item_->insns_size_in_code_units_); |
| |
| // TODO: replace with explicit resize routine. Using automatic extension side effect for now. |
| try_block_addr_->SetBit(current_code_item_->insns_size_in_code_units_); |
| try_block_addr_->ClearBit(current_code_item_->insns_size_in_code_units_); |
| |
| // If this is the first method, set up default entry and exit blocks. |
| if (current_method_ == 0) { |
| DCHECK(entry_block_ == NULL); |
| DCHECK(exit_block_ == NULL); |
| DCHECK_EQ(num_blocks_, 0); |
| entry_block_ = NewMemBB(kEntryBlock, num_blocks_++); |
| exit_block_ = NewMemBB(kExitBlock, num_blocks_++); |
| block_list_.Insert(entry_block_); |
| block_list_.Insert(exit_block_); |
| // TODO: deprecate all "cu->" fields; move what's left to wherever CompilationUnit is allocated. |
| cu_->dex_file = &dex_file; |
| cu_->class_def_idx = class_def_idx; |
| cu_->method_idx = method_idx; |
| cu_->access_flags = access_flags; |
| cu_->invoke_type = invoke_type; |
| cu_->shorty = dex_file.GetMethodShorty(dex_file.GetMethodId(method_idx)); |
| cu_->num_ins = current_code_item_->ins_size_; |
| cu_->num_regs = current_code_item_->registers_size_ - cu_->num_ins; |
| cu_->num_outs = current_code_item_->outs_size_; |
| cu_->num_dalvik_registers = current_code_item_->registers_size_; |
| cu_->insns = current_code_item_->insns_; |
| cu_->code_item = current_code_item_; |
| } else { |
| UNIMPLEMENTED(FATAL) << "Nested inlining not implemented."; |
| /* |
| * Will need to manage storage for ins & outs, push prevous state and update |
| * insert point. |
| */ |
| } |
| |
| /* Current block to record parsed instructions */ |
| BasicBlock *cur_block = NewMemBB(kDalvikByteCode, num_blocks_++); |
| DCHECK_EQ(current_offset_, 0); |
| cur_block->start_offset = current_offset_; |
| block_list_.Insert(cur_block); |
| /* Add first block to the fast lookup cache */ |
| // FIXME: block map needs association with offset/method pair rather than just offset |
| block_map_.Put(cur_block->start_offset, cur_block); |
| // FIXME: this needs to insert at the insert point rather than entry block. |
| entry_block_->fall_through = cur_block; |
| cur_block->predecessors->Insert(entry_block_); |
| |
| /* Identify code range in try blocks and set up the empty catch blocks */ |
| ProcessTryCatchBlocks(); |
| |
| /* Set up for simple method detection */ |
| int num_patterns = sizeof(special_patterns)/sizeof(special_patterns[0]); |
| bool live_pattern = (num_patterns > 0) && !(cu_->disable_opt & (1 << kMatch)); |
| bool* dead_pattern = |
| static_cast<bool*>(arena_->Alloc(sizeof(bool) * num_patterns, ArenaAllocator::kAllocMisc)); |
| int pattern_pos = 0; |
| |
| /* Parse all instructions and put them into containing basic blocks */ |
| while (code_ptr < code_end) { |
| MIR *insn = static_cast<MIR *>(arena_->Alloc(sizeof(MIR), ArenaAllocator::kAllocMIR)); |
| insn->offset = current_offset_; |
| insn->m_unit_index = current_method_; |
| int width = ParseInsn(code_ptr, &insn->dalvikInsn); |
| insn->width = width; |
| Instruction::Code opcode = insn->dalvikInsn.opcode; |
| if (opcode_count_ != NULL) { |
| opcode_count_[static_cast<int>(opcode)]++; |
| } |
| |
| |
| /* Possible simple method? */ |
| if (live_pattern) { |
| live_pattern = false; |
| special_case_ = kNoHandler; |
| for (int i = 0; i < num_patterns; i++) { |
| if (!dead_pattern[i]) { |
| if (special_patterns[i].opcodes[pattern_pos] == opcode) { |
| live_pattern = true; |
| special_case_ = special_patterns[i].handler_code; |
| } else { |
| dead_pattern[i] = true; |
| } |
| } |
| } |
| pattern_pos++; |
| } |
| |
| int flags = Instruction::FlagsOf(insn->dalvikInsn.opcode); |
| |
| int df_flags = oat_data_flow_attributes_[insn->dalvikInsn.opcode]; |
| |
| if (df_flags & DF_HAS_DEFS) { |
| def_count_ += (df_flags & DF_A_WIDE) ? 2 : 1; |
| } |
| |
| // Check for inline data block signatures |
| if (opcode == Instruction::NOP) { |
| // A simple NOP will have a width of 1 at this point, embedded data NOP > 1. |
| if ((width == 1) && ((current_offset_ & 0x1) == 0x1) && ((code_end - code_ptr) > 1)) { |
| // Could be an aligning nop. If an embedded data NOP follows, treat pair as single unit. |
| uint16_t following_raw_instruction = code_ptr[1]; |
| if ((following_raw_instruction == Instruction::kSparseSwitchSignature) || |
| (following_raw_instruction == Instruction::kPackedSwitchSignature) || |
| (following_raw_instruction == Instruction::kArrayDataSignature)) { |
| width += Instruction::At(code_ptr + 1)->SizeInCodeUnits(); |
| } |
| } |
| if (width == 1) { |
| // It is a simple nop - treat normally. |
| AppendMIR(cur_block, insn); |
| } else { |
| DCHECK(cur_block->fall_through == NULL); |
| DCHECK(cur_block->taken == NULL); |
| // Unreachable instruction, mark for no continuation. |
| flags &= ~Instruction::kContinue; |
| } |
| } else { |
| AppendMIR(cur_block, insn); |
| } |
| |
| code_ptr += width; |
| |
| if (flags & Instruction::kBranch) { |
| cur_block = ProcessCanBranch(cur_block, insn, current_offset_, |
| width, flags, code_ptr, code_end); |
| } else if (flags & Instruction::kReturn) { |
| cur_block->terminated_by_return = true; |
| cur_block->fall_through = exit_block_; |
| exit_block_->predecessors->Insert(cur_block); |
| /* |
| * Terminate the current block if there are instructions |
| * afterwards. |
| */ |
| if (code_ptr < code_end) { |
| /* |
| * Create a fallthrough block for real instructions |
| * (incl. NOP). |
| */ |
| FindBlock(current_offset_ + width, /* split */ false, /* create */ true, |
| /* immed_pred_block_p */ NULL); |
| } |
| } else if (flags & Instruction::kThrow) { |
| cur_block = ProcessCanThrow(cur_block, insn, current_offset_, width, flags, try_block_addr_, |
| code_ptr, code_end); |
| } else if (flags & Instruction::kSwitch) { |
| ProcessCanSwitch(cur_block, insn, current_offset_, width, flags); |
| } |
| current_offset_ += width; |
| BasicBlock *next_block = FindBlock(current_offset_, /* split */ false, /* create */ |
| false, /* immed_pred_block_p */ NULL); |
| if (next_block) { |
| /* |
| * The next instruction could be the target of a previously parsed |
| * forward branch so a block is already created. If the current |
| * instruction is not an unconditional branch, connect them through |
| * the fall-through link. |
| */ |
| DCHECK(cur_block->fall_through == NULL || |
| cur_block->fall_through == next_block || |
| cur_block->fall_through == exit_block_); |
| |
| if ((cur_block->fall_through == NULL) && (flags & Instruction::kContinue)) { |
| cur_block->fall_through = next_block; |
| next_block->predecessors->Insert(cur_block); |
| } |
| cur_block = next_block; |
| } |
| } |
| if (cu_->enable_debug & (1 << kDebugDumpCFG)) { |
| DumpCFG("/sdcard/1_post_parse_cfg/", true); |
| } |
| |
| if (cu_->verbose) { |
| DumpMIRGraph(); |
| } |
| } |
| |
| void MIRGraph::ShowOpcodeStats() { |
| DCHECK(opcode_count_ != NULL); |
| LOG(INFO) << "Opcode Count"; |
| for (int i = 0; i < kNumPackedOpcodes; i++) { |
| if (opcode_count_[i] != 0) { |
| LOG(INFO) << "-C- " << Instruction::Name(static_cast<Instruction::Code>(i)) |
| << " " << opcode_count_[i]; |
| } |
| } |
| } |
| |
| // TODO: use a configurable base prefix, and adjust callers to supply pass name. |
| /* Dump the CFG into a DOT graph */ |
| void MIRGraph::DumpCFG(const char* dir_prefix, bool all_blocks) { |
| FILE* file; |
| std::string fname(PrettyMethod(cu_->method_idx, *cu_->dex_file)); |
| ReplaceSpecialChars(fname); |
| fname = StringPrintf("%s%s%x.dot", dir_prefix, fname.c_str(), |
| GetEntryBlock()->fall_through->start_offset); |
| file = fopen(fname.c_str(), "w"); |
| if (file == NULL) { |
| return; |
| } |
| fprintf(file, "digraph G {\n"); |
| |
| fprintf(file, " rankdir=TB\n"); |
| |
| int num_blocks = all_blocks ? GetNumBlocks() : num_reachable_blocks_; |
| int idx; |
| |
| for (idx = 0; idx < num_blocks; idx++) { |
| int block_idx = all_blocks ? idx : dfs_order_->Get(idx); |
| BasicBlock *bb = GetBasicBlock(block_idx); |
| if (bb == NULL) break; |
| if (bb->block_type == kDead) continue; |
| if (bb->block_type == kEntryBlock) { |
| fprintf(file, " entry_%d [shape=Mdiamond];\n", bb->id); |
| } else if (bb->block_type == kExitBlock) { |
| fprintf(file, " exit_%d [shape=Mdiamond];\n", bb->id); |
| } else if (bb->block_type == kDalvikByteCode) { |
| fprintf(file, " block%04x_%d [shape=record,label = \"{ \\\n", |
| bb->start_offset, bb->id); |
| const MIR *mir; |
| fprintf(file, " {block id %d\\l}%s\\\n", bb->id, |
| bb->first_mir_insn ? " | " : " "); |
| for (mir = bb->first_mir_insn; mir; mir = mir->next) { |
| int opcode = mir->dalvikInsn.opcode; |
| fprintf(file, " {%04x %s %s %s\\l}%s\\\n", mir->offset, |
| mir->ssa_rep ? GetDalvikDisassembly(mir) : |
| (opcode < kMirOpFirst) ? Instruction::Name(mir->dalvikInsn.opcode) : |
| extended_mir_op_names_[opcode - kMirOpFirst], |
| (mir->optimization_flags & MIR_IGNORE_RANGE_CHECK) != 0 ? " no_rangecheck" : " ", |
| (mir->optimization_flags & MIR_IGNORE_NULL_CHECK) != 0 ? " no_nullcheck" : " ", |
| mir->next ? " | " : " "); |
| } |
| fprintf(file, " }\"];\n\n"); |
| } else if (bb->block_type == kExceptionHandling) { |
| char block_name[BLOCK_NAME_LEN]; |
| |
| GetBlockName(bb, block_name); |
| fprintf(file, " %s [shape=invhouse];\n", block_name); |
| } |
| |
| char block_name1[BLOCK_NAME_LEN], block_name2[BLOCK_NAME_LEN]; |
| |
| if (bb->taken) { |
| GetBlockName(bb, block_name1); |
| GetBlockName(bb->taken, block_name2); |
| fprintf(file, " %s:s -> %s:n [style=dotted]\n", |
| block_name1, block_name2); |
| } |
| if (bb->fall_through) { |
| GetBlockName(bb, block_name1); |
| GetBlockName(bb->fall_through, block_name2); |
| fprintf(file, " %s:s -> %s:n\n", block_name1, block_name2); |
| } |
| |
| if (bb->successor_block_list.block_list_type != kNotUsed) { |
| fprintf(file, " succ%04x_%d [shape=%s,label = \"{ \\\n", |
| bb->start_offset, bb->id, |
| (bb->successor_block_list.block_list_type == kCatch) ? |
| "Mrecord" : "record"); |
| GrowableArray<SuccessorBlockInfo*>::Iterator iterator(bb->successor_block_list.blocks); |
| SuccessorBlockInfo *successor_block_info = iterator.Next(); |
| |
| int succ_id = 0; |
| while (true) { |
| if (successor_block_info == NULL) break; |
| |
| BasicBlock *dest_block = successor_block_info->block; |
| SuccessorBlockInfo *next_successor_block_info = iterator.Next(); |
| |
| fprintf(file, " {<f%d> %04x: %04x\\l}%s\\\n", |
| succ_id++, |
| successor_block_info->key, |
| dest_block->start_offset, |
| (next_successor_block_info != NULL) ? " | " : " "); |
| |
| successor_block_info = next_successor_block_info; |
| } |
| fprintf(file, " }\"];\n\n"); |
| |
| GetBlockName(bb, block_name1); |
| fprintf(file, " %s:s -> succ%04x_%d:n [style=dashed]\n", |
| block_name1, bb->start_offset, bb->id); |
| |
| if (bb->successor_block_list.block_list_type == kPackedSwitch || |
| bb->successor_block_list.block_list_type == kSparseSwitch) { |
| GrowableArray<SuccessorBlockInfo*>::Iterator iter(bb->successor_block_list.blocks); |
| |
| succ_id = 0; |
| while (true) { |
| SuccessorBlockInfo *successor_block_info = iter.Next(); |
| if (successor_block_info == NULL) break; |
| |
| BasicBlock *dest_block = successor_block_info->block; |
| |
| GetBlockName(dest_block, block_name2); |
| fprintf(file, " succ%04x_%d:f%d:e -> %s:n\n", bb->start_offset, |
| bb->id, succ_id++, block_name2); |
| } |
| } |
| } |
| fprintf(file, "\n"); |
| |
| if (cu_->verbose) { |
| /* Display the dominator tree */ |
| GetBlockName(bb, block_name1); |
| fprintf(file, " cfg%s [label=\"%s\", shape=none];\n", |
| block_name1, block_name1); |
| if (bb->i_dom) { |
| GetBlockName(bb->i_dom, block_name2); |
| fprintf(file, " cfg%s:s -> cfg%s:n\n\n", block_name2, block_name1); |
| } |
| } |
| } |
| fprintf(file, "}\n"); |
| fclose(file); |
| } |
| |
| /* Insert an MIR instruction to the end of a basic block */ |
| void MIRGraph::AppendMIR(BasicBlock* bb, MIR* mir) { |
| if (bb->first_mir_insn == NULL) { |
| DCHECK(bb->last_mir_insn == NULL); |
| bb->last_mir_insn = bb->first_mir_insn = mir; |
| mir->prev = mir->next = NULL; |
| } else { |
| bb->last_mir_insn->next = mir; |
| mir->prev = bb->last_mir_insn; |
| mir->next = NULL; |
| bb->last_mir_insn = mir; |
| } |
| } |
| |
| /* Insert an MIR instruction to the head of a basic block */ |
| void MIRGraph::PrependMIR(BasicBlock* bb, MIR* mir) { |
| if (bb->first_mir_insn == NULL) { |
| DCHECK(bb->last_mir_insn == NULL); |
| bb->last_mir_insn = bb->first_mir_insn = mir; |
| mir->prev = mir->next = NULL; |
| } else { |
| bb->first_mir_insn->prev = mir; |
| mir->next = bb->first_mir_insn; |
| mir->prev = NULL; |
| bb->first_mir_insn = mir; |
| } |
| } |
| |
| /* Insert a MIR instruction after the specified MIR */ |
| void MIRGraph::InsertMIRAfter(BasicBlock* bb, MIR* current_mir, MIR* new_mir) { |
| new_mir->prev = current_mir; |
| new_mir->next = current_mir->next; |
| current_mir->next = new_mir; |
| |
| if (new_mir->next) { |
| /* Is not the last MIR in the block */ |
| new_mir->next->prev = new_mir; |
| } else { |
| /* Is the last MIR in the block */ |
| bb->last_mir_insn = new_mir; |
| } |
| } |
| |
| char* MIRGraph::GetDalvikDisassembly(const MIR* mir) { |
| DecodedInstruction insn = mir->dalvikInsn; |
| std::string str; |
| int flags = 0; |
| int opcode = insn.opcode; |
| char* ret; |
| bool nop = false; |
| SSARepresentation* ssa_rep = mir->ssa_rep; |
| Instruction::Format dalvik_format = Instruction::k10x; // Default to no-operand format |
| int defs = (ssa_rep != NULL) ? ssa_rep->num_defs : 0; |
| int uses = (ssa_rep != NULL) ? ssa_rep->num_uses : 0; |
| |
| // Handle special cases. |
| if ((opcode == kMirOpCheck) || (opcode == kMirOpCheckPart2)) { |
| str.append(extended_mir_op_names_[opcode - kMirOpFirst]); |
| str.append(": "); |
| // Recover the original Dex instruction |
| insn = mir->meta.throw_insn->dalvikInsn; |
| ssa_rep = mir->meta.throw_insn->ssa_rep; |
| defs = ssa_rep->num_defs; |
| uses = ssa_rep->num_uses; |
| opcode = insn.opcode; |
| } else if (opcode == kMirOpNop) { |
| str.append("["); |
| insn.opcode = mir->meta.original_opcode; |
| opcode = mir->meta.original_opcode; |
| nop = true; |
| } |
| |
| if (opcode >= kMirOpFirst) { |
| str.append(extended_mir_op_names_[opcode - kMirOpFirst]); |
| } else { |
| dalvik_format = Instruction::FormatOf(insn.opcode); |
| flags = Instruction::FlagsOf(insn.opcode); |
| str.append(Instruction::Name(insn.opcode)); |
| } |
| |
| if (opcode == kMirOpPhi) { |
| int* incoming = reinterpret_cast<int*>(insn.vB); |
| str.append(StringPrintf(" %s = (%s", |
| GetSSANameWithConst(ssa_rep->defs[0], true).c_str(), |
| GetSSANameWithConst(ssa_rep->uses[0], true).c_str())); |
| str.append(StringPrintf(":%d", incoming[0])); |
| int i; |
| for (i = 1; i < uses; i++) { |
| str.append(StringPrintf(", %s:%d", |
| GetSSANameWithConst(ssa_rep->uses[i], true).c_str(), |
| incoming[i])); |
| } |
| str.append(")"); |
| } else if ((flags & Instruction::kBranch) != 0) { |
| // For branches, decode the instructions to print out the branch targets. |
| int offset = 0; |
| switch (dalvik_format) { |
| case Instruction::k21t: |
| str.append(StringPrintf(" %s,", GetSSANameWithConst(ssa_rep->uses[0], false).c_str())); |
| offset = insn.vB; |
| break; |
| case Instruction::k22t: |
| str.append(StringPrintf(" %s, %s,", GetSSANameWithConst(ssa_rep->uses[0], false).c_str(), |
| GetSSANameWithConst(ssa_rep->uses[1], false).c_str())); |
| offset = insn.vC; |
| break; |
| case Instruction::k10t: |
| case Instruction::k20t: |
| case Instruction::k30t: |
| offset = insn.vA; |
| break; |
| default: |
| LOG(FATAL) << "Unexpected branch format " << dalvik_format << " from " << insn.opcode; |
| } |
| str.append(StringPrintf(" 0x%x (%c%x)", mir->offset + offset, |
| offset > 0 ? '+' : '-', offset > 0 ? offset : -offset)); |
| } else { |
| // For invokes-style formats, treat wide regs as a pair of singles |
| bool show_singles = ((dalvik_format == Instruction::k35c) || |
| (dalvik_format == Instruction::k3rc)); |
| if (defs != 0) { |
| str.append(StringPrintf(" %s", GetSSANameWithConst(ssa_rep->defs[0], false).c_str())); |
| if (uses != 0) { |
| str.append(", "); |
| } |
| } |
| for (int i = 0; i < uses; i++) { |
| str.append( |
| StringPrintf(" %s", GetSSANameWithConst(ssa_rep->uses[i], show_singles).c_str())); |
| if (!show_singles && (reg_location_ != NULL) && reg_location_[i].wide) { |
| // For the listing, skip the high sreg. |
| i++; |
| } |
| if (i != (uses -1)) { |
| str.append(","); |
| } |
| } |
| switch (dalvik_format) { |
| case Instruction::k11n: // Add one immediate from vB |
| case Instruction::k21s: |
| case Instruction::k31i: |
| case Instruction::k21h: |
| str.append(StringPrintf(", #%d", insn.vB)); |
| break; |
| case Instruction::k51l: // Add one wide immediate |
| str.append(StringPrintf(", #%lld", insn.vB_wide)); |
| break; |
| case Instruction::k21c: // One register, one string/type/method index |
| case Instruction::k31c: |
| str.append(StringPrintf(", index #%d", insn.vB)); |
| break; |
| case Instruction::k22c: // Two registers, one string/type/method index |
| str.append(StringPrintf(", index #%d", insn.vC)); |
| break; |
| case Instruction::k22s: // Add one immediate from vC |
| case Instruction::k22b: |
| str.append(StringPrintf(", #%d", insn.vC)); |
| break; |
| default: { |
| // Nothing left to print |
| } |
| } |
| } |
| if (nop) { |
| str.append("]--optimized away"); |
| } |
| int length = str.length() + 1; |
| ret = static_cast<char*>(arena_->Alloc(length, ArenaAllocator::kAllocDFInfo)); |
| strncpy(ret, str.c_str(), length); |
| return ret; |
| } |
| |
| /* Turn method name into a legal Linux file name */ |
| void MIRGraph::ReplaceSpecialChars(std::string& str) { |
| static const struct { const char before; const char after; } match[] = { |
| {'/', '-'}, {';', '#'}, {' ', '#'}, {'$', '+'}, |
| {'(', '@'}, {')', '@'}, {'<', '='}, {'>', '='} |
| }; |
| for (unsigned int i = 0; i < sizeof(match)/sizeof(match[0]); i++) { |
| std::replace(str.begin(), str.end(), match[i].before, match[i].after); |
| } |
| } |
| |
| std::string MIRGraph::GetSSAName(int ssa_reg) { |
| // TODO: This value is needed for LLVM and debugging. Currently, we compute this and then copy to |
| // the arena. We should be smarter and just place straight into the arena, or compute the |
| // value more lazily. |
| return StringPrintf("v%d_%d", SRegToVReg(ssa_reg), GetSSASubscript(ssa_reg)); |
| } |
| |
| // Similar to GetSSAName, but if ssa name represents an immediate show that as well. |
| std::string MIRGraph::GetSSANameWithConst(int ssa_reg, bool singles_only) { |
| if (reg_location_ == NULL) { |
| // Pre-SSA - just use the standard name |
| return GetSSAName(ssa_reg); |
| } |
| if (IsConst(reg_location_[ssa_reg])) { |
| if (!singles_only && reg_location_[ssa_reg].wide) { |
| return StringPrintf("v%d_%d#0x%llx", SRegToVReg(ssa_reg), GetSSASubscript(ssa_reg), |
| ConstantValueWide(reg_location_[ssa_reg])); |
| } else { |
| return StringPrintf("v%d_%d#0x%x", SRegToVReg(ssa_reg), GetSSASubscript(ssa_reg), |
| ConstantValue(reg_location_[ssa_reg])); |
| } |
| } else { |
| return StringPrintf("v%d_%d", SRegToVReg(ssa_reg), GetSSASubscript(ssa_reg)); |
| } |
| } |
| |
| void MIRGraph::GetBlockName(BasicBlock* bb, char* name) { |
| switch (bb->block_type) { |
| case kEntryBlock: |
| snprintf(name, BLOCK_NAME_LEN, "entry_%d", bb->id); |
| break; |
| case kExitBlock: |
| snprintf(name, BLOCK_NAME_LEN, "exit_%d", bb->id); |
| break; |
| case kDalvikByteCode: |
| snprintf(name, BLOCK_NAME_LEN, "block%04x_%d", bb->start_offset, bb->id); |
| break; |
| case kExceptionHandling: |
| snprintf(name, BLOCK_NAME_LEN, "exception%04x_%d", bb->start_offset, |
| bb->id); |
| break; |
| default: |
| snprintf(name, BLOCK_NAME_LEN, "_%d", bb->id); |
| break; |
| } |
| } |
| |
| const char* MIRGraph::GetShortyFromTargetIdx(int target_idx) { |
| // FIXME: use current code unit for inline support. |
| const DexFile::MethodId& method_id = cu_->dex_file->GetMethodId(target_idx); |
| return cu_->dex_file->GetShorty(method_id.proto_idx_); |
| } |
| |
| /* Debug Utility - dump a compilation unit */ |
| void MIRGraph::DumpMIRGraph() { |
| BasicBlock* bb; |
| const char* block_type_names[] = { |
| "Entry Block", |
| "Code Block", |
| "Exit Block", |
| "Exception Handling", |
| "Catch Block" |
| }; |
| |
| LOG(INFO) << "Compiling " << PrettyMethod(cu_->method_idx, *cu_->dex_file); |
| LOG(INFO) << cu_->insns << " insns"; |
| LOG(INFO) << GetNumBlocks() << " blocks in total"; |
| GrowableArray<BasicBlock*>::Iterator iterator(&block_list_); |
| |
| while (true) { |
| bb = iterator.Next(); |
| if (bb == NULL) break; |
| LOG(INFO) << StringPrintf("Block %d (%s) (insn %04x - %04x%s)", |
| bb->id, |
| block_type_names[bb->block_type], |
| bb->start_offset, |
| bb->last_mir_insn ? bb->last_mir_insn->offset : bb->start_offset, |
| bb->last_mir_insn ? "" : " empty"); |
| if (bb->taken) { |
| LOG(INFO) << " Taken branch: block " << bb->taken->id |
| << "(0x" << std::hex << bb->taken->start_offset << ")"; |
| } |
| if (bb->fall_through) { |
| LOG(INFO) << " Fallthrough : block " << bb->fall_through->id |
| << " (0x" << std::hex << bb->fall_through->start_offset << ")"; |
| } |
| } |
| } |
| |
| /* |
| * Build an array of location records for the incoming arguments. |
| * Note: one location record per word of arguments, with dummy |
| * high-word loc for wide arguments. Also pull up any following |
| * MOVE_RESULT and incorporate it into the invoke. |
| */ |
| CallInfo* MIRGraph::NewMemCallInfo(BasicBlock* bb, MIR* mir, InvokeType type, |
| bool is_range) { |
| CallInfo* info = static_cast<CallInfo*>(arena_->Alloc(sizeof(CallInfo), |
| ArenaAllocator::kAllocMisc)); |
| MIR* move_result_mir = FindMoveResult(bb, mir); |
| if (move_result_mir == NULL) { |
| info->result.location = kLocInvalid; |
| } else { |
| info->result = GetRawDest(move_result_mir); |
| move_result_mir->meta.original_opcode = move_result_mir->dalvikInsn.opcode; |
| move_result_mir->dalvikInsn.opcode = static_cast<Instruction::Code>(kMirOpNop); |
| } |
| info->num_arg_words = mir->ssa_rep->num_uses; |
| info->args = (info->num_arg_words == 0) ? NULL : static_cast<RegLocation*> |
| (arena_->Alloc(sizeof(RegLocation) * info->num_arg_words, ArenaAllocator::kAllocMisc)); |
| for (int i = 0; i < info->num_arg_words; i++) { |
| info->args[i] = GetRawSrc(mir, i); |
| } |
| info->opt_flags = mir->optimization_flags; |
| info->type = type; |
| info->is_range = is_range; |
| info->index = mir->dalvikInsn.vB; |
| info->offset = mir->offset; |
| return info; |
| } |
| |
| // Allocate a new basic block. |
| BasicBlock* MIRGraph::NewMemBB(BBType block_type, int block_id) { |
| BasicBlock* bb = static_cast<BasicBlock*>(arena_->Alloc(sizeof(BasicBlock), |
| ArenaAllocator::kAllocBB)); |
| bb->block_type = block_type; |
| bb->id = block_id; |
| // TUNING: better estimate of the exit block predecessors? |
| bb->predecessors = new (arena_) GrowableArray<BasicBlock*>(arena_, |
| (block_type == kExitBlock) ? 2048 : 2, |
| kGrowableArrayPredecessors); |
| bb->successor_block_list.block_list_type = kNotUsed; |
| block_id_map_.Put(block_id, block_id); |
| return bb; |
| } |
| |
| } // namespace art |