compiler/optimizing/ssa_builder.cc - LeafOS-Project/android_art - Gitiles

 /*
  * Copyright (C) 2014 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "ssa_builder.h"

 #include "nodes.h"
 #include "ssa_type_propagation.h"
 #include "ssa_phi_elimination.h"

 namespace art {

 void SsaBuilder::BuildSsa() {
   // 1) Visit in reverse post order. We need to have all predecessors of a block visited
   // (with the exception of loops) in order to create the right environment for that
   // block. For loops, we create phis whose inputs will be set in 2).
   for (HReversePostOrderIterator it(*GetGraph()); !it.Done(); it.Advance()) {
     VisitBasicBlock(it.Current());
   }

   // 2) Set inputs of loop phis.
   for (size_t i = 0; i < loop_headers_.Size(); i++) {
     HBasicBlock* block = loop_headers_.Get(i);
     for (HInstructionIterator it(block->GetPhis()); !it.Done(); it.Advance()) {
       HPhi* phi = it.Current()->AsPhi();
       for (size_t pred = 0; pred < block->GetPredecessors().Size(); pred++) {
         HInstruction* input = ValueOfLocal(block->GetPredecessors().Get(pred), phi->GetRegNumber());
         phi->AddInput(input);
       }
     }
   }

   // 3) Remove dead phis. This will remove phis that are only used by environments:
   // at the DEX level, the type of these phis does not need to be consistent, but
   // our code generator will complain if the inputs of a phi do not have the same
   // type (modulo the special case of `null`).
   SsaDeadPhiElimination dead_phis(GetGraph());
   dead_phis.Run();

   // 4) Propagate types of phis. At this point, phis are typed void in the general
   // case, or float or double when we created a floating-point equivalent. So we
   // need to propagate the types across phis to give them a correct type.
   SsaTypePropagation type_propagation(GetGraph());
   type_propagation.Run();

   // 5) Clear locals.
   // TODO: Move this to a dead code eliminator phase.
   for (HInstructionIterator it(GetGraph()->GetEntryBlock()->GetInstructions());
        !it.Done();
        it.Advance()) {
     HInstruction* current = it.Current();
     if (current->IsLocal()) {
       current->GetBlock()->RemoveInstruction(current);
     }
   }
 }

 HInstruction* SsaBuilder::ValueOfLocal(HBasicBlock* block, size_t local) {
   return GetLocalsFor(block)->GetInstructionAt(local);
 }

 void SsaBuilder::VisitBasicBlock(HBasicBlock* block) {
   current_locals_ = GetLocalsFor(block);

   if (block->IsLoopHeader()) {
     // If the block is a loop header, we know we only have visited the pre header
     // because we are visiting in reverse post order. We create phis for all initialized
     // locals from the pre header. Their inputs will be populated at the end of
     // the analysis.
     for (size_t local = 0; local < current_locals_->Size(); local++) {
       HInstruction* incoming = ValueOfLocal(block->GetLoopInformation()->GetPreHeader(), local);
       if (incoming != nullptr) {
         HPhi* phi = new (GetGraph()->GetArena()) HPhi(
             GetGraph()->GetArena(), local, 0, Primitive::kPrimVoid);
         block->AddPhi(phi);
         current_locals_->SetRawEnvAt(local, phi);
       }
     }
     // Save the loop header so that the last phase of the analysis knows which
     // blocks need to be updated.
     loop_headers_.Add(block);
   } else if (block->GetPredecessors().Size() > 0) {
     // All predecessors have already been visited because we are visiting in reverse post order.
     // We merge the values of all locals, creating phis if those values differ.
     for (size_t local = 0; local < current_locals_->Size(); local++) {
       bool one_predecessor_has_no_value = false;
       bool is_different = false;
       HInstruction* value = ValueOfLocal(block->GetPredecessors().Get(0), local);

       for (size_t i = 0, e = block->GetPredecessors().Size(); i < e; ++i) {
         HInstruction* current = ValueOfLocal(block->GetPredecessors().Get(i), local);
         if (current == nullptr) {
           one_predecessor_has_no_value = true;
           break;
         } else if (current != value) {
           is_different = true;
         }
       }

       if (one_predecessor_has_no_value) {
         // If one predecessor has no value for this local, we trust the verifier has
         // successfully checked that there is a store dominating any read after this block.
         continue;
       }

       if (is_different) {
         HPhi* phi = new (GetGraph()->GetArena()) HPhi(
             GetGraph()->GetArena(), local, block->GetPredecessors().Size(), Primitive::kPrimVoid);
         for (size_t i = 0; i < block->GetPredecessors().Size(); i++) {
           HInstruction* pred_value = ValueOfLocal(block->GetPredecessors().Get(i), local);
           phi->SetRawInputAt(i, pred_value);
         }
         block->AddPhi(phi);
         value = phi;
       }
       current_locals_->SetRawEnvAt(local, value);
     }
   }

   // Visit all instructions. The instructions of interest are:
   // - HLoadLocal: replace them with the current value of the local.
   // - HStoreLocal: update current value of the local and remove the instruction.
   // - Instructions that require an environment: populate their environment
   //   with the current values of the locals.
   for (HInstructionIterator it(block->GetInstructions()); !it.Done(); it.Advance()) {
     it.Current()->Accept(this);
   }
 }

 /**
  * Constants in the Dex format are not typed. So the builder types them as
  * integers, but when doing the SSA form, we might realize the constant
  * is used for floating point operations. We create a floating-point equivalent
  * constant to make the operations correctly typed.
  */
 static HFloatConstant* GetFloatEquivalent(HIntConstant* constant) {
   // We place the floating point constant next to this constant.
   HFloatConstant* result = constant->GetNext()->AsFloatConstant();
   if (result == nullptr) {
     HGraph* graph = constant->GetBlock()->GetGraph();
     ArenaAllocator* allocator = graph->GetArena();
     result = new (allocator) HFloatConstant(bit_cast<int32_t, float>(constant->GetValue()));
     constant->GetBlock()->InsertInstructionBefore(result, constant->GetNext());
   } else {
     // If there is already a constant with the expected type, we know it is
     // the floating point equivalent of this constant.
     DCHECK_EQ((bit_cast<float, int32_t>(result->GetValue())), constant->GetValue());
   }
   return result;
 }

 /**
  * Wide constants in the Dex format are not typed. So the builder types them as
  * longs, but when doing the SSA form, we might realize the constant
  * is used for floating point operations. We create a floating-point equivalent
  * constant to make the operations correctly typed.
  */
 static HDoubleConstant* GetDoubleEquivalent(HLongConstant* constant) {
   // We place the floating point constant next to this constant.
   HDoubleConstant* result = constant->GetNext()->AsDoubleConstant();
   if (result == nullptr) {
     HGraph* graph = constant->GetBlock()->GetGraph();
     ArenaAllocator* allocator = graph->GetArena();
     result = new (allocator) HDoubleConstant(bit_cast<int64_t, double>(constant->GetValue()));
     constant->GetBlock()->InsertInstructionBefore(result, constant->GetNext());
   } else {
     // If there is already a constant with the expected type, we know it is
     // the floating point equivalent of this constant.
     DCHECK_EQ((bit_cast<double, int64_t>(result->GetValue())), constant->GetValue());
   }
   return result;
 }

 /**
  * Because of Dex format, we might end up having the same phi being
  * used for non floating point operations and floating point operations. Because
  * we want the graph to be correctly typed (and thereafter avoid moves between
  * floating point registers and core registers), we need to create a copy of the
  * phi with a floating point type.
  */
 static HPhi* GetFloatOrDoubleEquivalentOfPhi(HPhi* phi, Primitive::Type type) {
   // We place the floating point phi next to this phi.
   HInstruction* next = phi->GetNext();
   if (next == nullptr || (next->AsPhi()->GetRegNumber() != phi->GetRegNumber())) {
     ArenaAllocator* allocator = phi->GetBlock()->GetGraph()->GetArena();
     HPhi* new_phi = new (allocator) HPhi(allocator, phi->GetRegNumber(), phi->InputCount(), type);
     for (size_t i = 0, e = phi->InputCount(); i < e; ++i) {
       // Copy the inputs. Note that the graph may not be correctly typed by doing this copy,
       // but the type propagation phase will fix it.
       new_phi->SetRawInputAt(i, phi->InputAt(i));
     }
     phi->GetBlock()->InsertPhiAfter(new_phi, phi);
     return new_phi;
   } else {
     DCHECK_EQ(next->GetType(), type);
     return next->AsPhi();
   }
 }

 HInstruction* SsaBuilder::GetFloatOrDoubleEquivalent(HInstruction* user,
                                                      HInstruction* value,
                                                      Primitive::Type type) {
   if (value->IsArrayGet()) {
     // The verifier has checked that values in arrays cannot be used for both
     // floating point and non-floating point operations. It is therefore safe to just
     // change the type of the operation.
     value->AsArrayGet()->SetType(type);
     return value;
   } else if (value->IsLongConstant()) {
     return GetDoubleEquivalent(value->AsLongConstant());
   } else if (value->IsIntConstant()) {
     return GetFloatEquivalent(value->AsIntConstant());
   } else if (value->IsPhi()) {
     return GetFloatOrDoubleEquivalentOfPhi(value->AsPhi(), type);
   } else {
     // For other instructions, we assume the verifier has checked that the dex format is correctly
     // typed and the value in a dex register will not be used for both floating point and
     // non-floating point operations. So the only reason an instruction would want a floating
     // point equivalent is for an unused phi that will be removed by the dead phi elimination phase.
     DCHECK(user->IsPhi());
     return value;
   }
 }

 void SsaBuilder::VisitLoadLocal(HLoadLocal* load) {
   HInstruction* value = current_locals_->GetInstructionAt(load->GetLocal()->GetRegNumber());
   if (load->GetType() != value->GetType()
       && (load->GetType() == Primitive::kPrimFloat || load->GetType() == Primitive::kPrimDouble)) {
     // If the operation requests a specific type, we make sure its input is of that type.
     value = GetFloatOrDoubleEquivalent(load, value, load->GetType());
   }
   load->ReplaceWith(value);
   load->GetBlock()->RemoveInstruction(load);
 }

 void SsaBuilder::VisitStoreLocal(HStoreLocal* store) {
   current_locals_->SetRawEnvAt(store->GetLocal()->GetRegNumber(), store->InputAt(1));
   store->GetBlock()->RemoveInstruction(store);
 }

 void SsaBuilder::VisitInstruction(HInstruction* instruction) {
   if (!instruction->NeedsEnvironment()) {
     return;
   }
   HEnvironment* environment = new (GetGraph()->GetArena()) HEnvironment(
       GetGraph()->GetArena(), current_locals_->Size());
   environment->CopyFrom(current_locals_);
   instruction->SetEnvironment(environment);
 }

 void SsaBuilder::VisitTemporary(HTemporary* temp) {
   // Temporaries are only used by the baseline register allocator.
   temp->GetBlock()->RemoveInstruction(temp);
 }

 }  // namespace art
	/*
	* Copyright (C) 2014 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "ssa_builder.h"

	#include "nodes.h"
	#include "ssa_type_propagation.h"
	#include "ssa_phi_elimination.h"

	namespace art {

	void SsaBuilder::BuildSsa() {
	// 1) Visit in reverse post order. We need to have all predecessors of a block visited
	// (with the exception of loops) in order to create the right environment for that
	// block. For loops, we create phis whose inputs will be set in 2).
	for (HReversePostOrderIterator it(*GetGraph()); !it.Done(); it.Advance()) {
	VisitBasicBlock(it.Current());
	}

	// 2) Set inputs of loop phis.
	for (size_t i = 0; i < loop_headers_.Size(); i++) {
	HBasicBlock* block = loop_headers_.Get(i);
	for (HInstructionIterator it(block->GetPhis()); !it.Done(); it.Advance()) {
	HPhi* phi = it.Current()->AsPhi();
	for (size_t pred = 0; pred < block->GetPredecessors().Size(); pred++) {
	HInstruction* input = ValueOfLocal(block->GetPredecessors().Get(pred), phi->GetRegNumber());
	phi->AddInput(input);
	}
	}
	}

	// 3) Remove dead phis. This will remove phis that are only used by environments:
	// at the DEX level, the type of these phis does not need to be consistent, but
	// our code generator will complain if the inputs of a phi do not have the same
	// type (modulo the special case of `null`).
	SsaDeadPhiElimination dead_phis(GetGraph());
	dead_phis.Run();

	// 4) Propagate types of phis. At this point, phis are typed void in the general
	// case, or float or double when we created a floating-point equivalent. So we
	// need to propagate the types across phis to give them a correct type.
	SsaTypePropagation type_propagation(GetGraph());
	type_propagation.Run();

	// 5) Clear locals.
	// TODO: Move this to a dead code eliminator phase.
	for (HInstructionIterator it(GetGraph()->GetEntryBlock()->GetInstructions());
	!it.Done();
	it.Advance()) {
	HInstruction* current = it.Current();
	if (current->IsLocal()) {
	current->GetBlock()->RemoveInstruction(current);
	}
	}
	}

	HInstruction* SsaBuilder::ValueOfLocal(HBasicBlock* block, size_t local) {
	return GetLocalsFor(block)->GetInstructionAt(local);
	}

	void SsaBuilder::VisitBasicBlock(HBasicBlock* block) {
	current_locals_ = GetLocalsFor(block);

	if (block->IsLoopHeader()) {
	// If the block is a loop header, we know we only have visited the pre header
	// because we are visiting in reverse post order. We create phis for all initialized
	// locals from the pre header. Their inputs will be populated at the end of
	// the analysis.
	for (size_t local = 0; local < current_locals_->Size(); local++) {
	HInstruction* incoming = ValueOfLocal(block->GetLoopInformation()->GetPreHeader(), local);
	if (incoming != nullptr) {
	HPhi* phi = new (GetGraph()->GetArena()) HPhi(
	GetGraph()->GetArena(), local, 0, Primitive::kPrimVoid);
	block->AddPhi(phi);
	current_locals_->SetRawEnvAt(local, phi);
	}
	}
	// Save the loop header so that the last phase of the analysis knows which
	// blocks need to be updated.
	loop_headers_.Add(block);
	} else if (block->GetPredecessors().Size() > 0) {
	// All predecessors have already been visited because we are visiting in reverse post order.
	// We merge the values of all locals, creating phis if those values differ.
	for (size_t local = 0; local < current_locals_->Size(); local++) {
	bool one_predecessor_has_no_value = false;
	bool is_different = false;
	HInstruction* value = ValueOfLocal(block->GetPredecessors().Get(0), local);

	for (size_t i = 0, e = block->GetPredecessors().Size(); i < e; ++i) {
	HInstruction* current = ValueOfLocal(block->GetPredecessors().Get(i), local);
	if (current == nullptr) {
	one_predecessor_has_no_value = true;
	break;
	} else if (current != value) {
	is_different = true;
	}
	}

	if (one_predecessor_has_no_value) {
	// If one predecessor has no value for this local, we trust the verifier has
	// successfully checked that there is a store dominating any read after this block.
	continue;
	}

	if (is_different) {
	HPhi* phi = new (GetGraph()->GetArena()) HPhi(
	GetGraph()->GetArena(), local, block->GetPredecessors().Size(), Primitive::kPrimVoid);
	for (size_t i = 0; i < block->GetPredecessors().Size(); i++) {
	HInstruction* pred_value = ValueOfLocal(block->GetPredecessors().Get(i), local);
	phi->SetRawInputAt(i, pred_value);
	}
	block->AddPhi(phi);
	value = phi;
	}
	current_locals_->SetRawEnvAt(local, value);
	}
	}

	// Visit all instructions. The instructions of interest are:
	// - HLoadLocal: replace them with the current value of the local.
	// - HStoreLocal: update current value of the local and remove the instruction.
	// - Instructions that require an environment: populate their environment
	// with the current values of the locals.
	for (HInstructionIterator it(block->GetInstructions()); !it.Done(); it.Advance()) {
	it.Current()->Accept(this);
	}
	}

	/**
	* Constants in the Dex format are not typed. So the builder types them as
	* integers, but when doing the SSA form, we might realize the constant
	* is used for floating point operations. We create a floating-point equivalent
	* constant to make the operations correctly typed.
	*/
	static HFloatConstant* GetFloatEquivalent(HIntConstant* constant) {
	// We place the floating point constant next to this constant.
	HFloatConstant* result = constant->GetNext()->AsFloatConstant();
	if (result == nullptr) {
	HGraph* graph = constant->GetBlock()->GetGraph();
	ArenaAllocator* allocator = graph->GetArena();
	result = new (allocator) HFloatConstant(bit_cast<int32_t, float>(constant->GetValue()));
	constant->GetBlock()->InsertInstructionBefore(result, constant->GetNext());
	} else {
	// If there is already a constant with the expected type, we know it is
	// the floating point equivalent of this constant.
	DCHECK_EQ((bit_cast<float, int32_t>(result->GetValue())), constant->GetValue());
	}
	return result;
	}

	/**
	* Wide constants in the Dex format are not typed. So the builder types them as
	* longs, but when doing the SSA form, we might realize the constant
	* is used for floating point operations. We create a floating-point equivalent
	* constant to make the operations correctly typed.
	*/
	static HDoubleConstant* GetDoubleEquivalent(HLongConstant* constant) {
	// We place the floating point constant next to this constant.
	HDoubleConstant* result = constant->GetNext()->AsDoubleConstant();
	if (result == nullptr) {
	HGraph* graph = constant->GetBlock()->GetGraph();
	ArenaAllocator* allocator = graph->GetArena();
	result = new (allocator) HDoubleConstant(bit_cast<int64_t, double>(constant->GetValue()));
	constant->GetBlock()->InsertInstructionBefore(result, constant->GetNext());
	} else {
	// If there is already a constant with the expected type, we know it is
	// the floating point equivalent of this constant.
	DCHECK_EQ((bit_cast<double, int64_t>(result->GetValue())), constant->GetValue());
	}
	return result;
	}

	/**
	* Because of Dex format, we might end up having the same phi being
	* used for non floating point operations and floating point operations. Because
	* we want the graph to be correctly typed (and thereafter avoid moves between
	* floating point registers and core registers), we need to create a copy of the
	* phi with a floating point type.
	*/
	static HPhi* GetFloatOrDoubleEquivalentOfPhi(HPhi* phi, Primitive::Type type) {
	// We place the floating point phi next to this phi.
	HInstruction* next = phi->GetNext();
	if (next == nullptr \|\| (next->AsPhi()->GetRegNumber() != phi->GetRegNumber())) {
	ArenaAllocator* allocator = phi->GetBlock()->GetGraph()->GetArena();
	HPhi* new_phi = new (allocator) HPhi(allocator, phi->GetRegNumber(), phi->InputCount(), type);
	for (size_t i = 0, e = phi->InputCount(); i < e; ++i) {
	// Copy the inputs. Note that the graph may not be correctly typed by doing this copy,
	// but the type propagation phase will fix it.
	new_phi->SetRawInputAt(i, phi->InputAt(i));
	}
	phi->GetBlock()->InsertPhiAfter(new_phi, phi);
	return new_phi;
	} else {
	DCHECK_EQ(next->GetType(), type);
	return next->AsPhi();
	}
	}

	HInstruction* SsaBuilder::GetFloatOrDoubleEquivalent(HInstruction* user,
	HInstruction* value,
	Primitive::Type type) {
	if (value->IsArrayGet()) {
	// The verifier has checked that values in arrays cannot be used for both
	// floating point and non-floating point operations. It is therefore safe to just
	// change the type of the operation.
	value->AsArrayGet()->SetType(type);
	return value;
	} else if (value->IsLongConstant()) {
	return GetDoubleEquivalent(value->AsLongConstant());
	} else if (value->IsIntConstant()) {
	return GetFloatEquivalent(value->AsIntConstant());
	} else if (value->IsPhi()) {
	return GetFloatOrDoubleEquivalentOfPhi(value->AsPhi(), type);
	} else {
	// For other instructions, we assume the verifier has checked that the dex format is correctly
	// typed and the value in a dex register will not be used for both floating point and
	// non-floating point operations. So the only reason an instruction would want a floating
	// point equivalent is for an unused phi that will be removed by the dead phi elimination phase.
	DCHECK(user->IsPhi());
	return value;
	}
	}

	void SsaBuilder::VisitLoadLocal(HLoadLocal* load) {
	HInstruction* value = current_locals_->GetInstructionAt(load->GetLocal()->GetRegNumber());
	if (load->GetType() != value->GetType()
	&& (load->GetType() == Primitive::kPrimFloat \|\| load->GetType() == Primitive::kPrimDouble)) {
	// If the operation requests a specific type, we make sure its input is of that type.
	value = GetFloatOrDoubleEquivalent(load, value, load->GetType());
	}
	load->ReplaceWith(value);
	load->GetBlock()->RemoveInstruction(load);
	}

	void SsaBuilder::VisitStoreLocal(HStoreLocal* store) {
	current_locals_->SetRawEnvAt(store->GetLocal()->GetRegNumber(), store->InputAt(1));
	store->GetBlock()->RemoveInstruction(store);
	}

	void SsaBuilder::VisitInstruction(HInstruction* instruction) {
	if (!instruction->NeedsEnvironment()) {
	return;
	}
	HEnvironment* environment = new (GetGraph()->GetArena()) HEnvironment(
	GetGraph()->GetArena(), current_locals_->Size());
	environment->CopyFrom(current_locals_);
	instruction->SetEnvironment(environment);
	}

	void SsaBuilder::VisitTemporary(HTemporary* temp) {
	// Temporaries are only used by the baseline register allocator.
	temp->GetBlock()->RemoveInstruction(temp);
	}

	} // namespace art