| // |
| // Copyright (C) 2012 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| |
| // TODO We should really separate out those files that are actually needed for both variants of an |
| // architecture into its own category. Currently we just include all of the 32bit variant in the |
| // 64bit variant. It also might be good to allow one to compile only the 64bit variant without the |
| // 32bit one. |
| |
| package { |
| // See: http://go/android-license-faq |
| // A large-scale-change added 'default_applicable_licenses' to import |
| // all of the 'license_kinds' from "art_license" |
| // to get the below license kinds: |
| // SPDX-license-identifier-Apache-2.0 |
| default_applicable_licenses: ["art_license"], |
| } |
| |
| // Common dependencies for libart-compiler_deps and libartd-compiler_deps. |
| cc_defaults { |
| name: "libart-compiler_common_deps", |
| shared_libs: [ |
| "libbase", |
| "liblzma", // libelffile(d) dependency; must be repeated here since it's a static lib. |
| "libartpalette", |
| ], |
| header_libs: [ |
| "libart_headers", |
| "libart_generated_headers", |
| ], |
| } |
| |
| // Dependencies of libart-compiler, used to propagate libart-compiler deps when static linking. |
| art_cc_defaults { |
| name: "libart-compiler_deps", |
| defaults: ["libart-compiler_common_deps"], |
| shared_libs: [ |
| "libartbase", |
| "libprofile", |
| "libdexfile", |
| ], |
| static_libs: ["libelffile"], |
| codegen: { |
| arm: { |
| // VIXL assembly support for ARM targets. |
| static_libs: [ |
| "libvixl", |
| ], |
| }, |
| arm64: { |
| // VIXL assembly support for ARM64 targets. |
| static_libs: [ |
| "libvixl", |
| ], |
| }, |
| }, |
| // In order to save memory on device `art::HGraphVisualizerDisassembler` loads |
| // `libart-disassembler.so` dynamically. Host builds of `libart-compiler` depend on |
| // `libart-disassembler` directly with `shared_libs` or `static_libs`. |
| target: { |
| host: { |
| shared: { |
| shared_libs: [ |
| "libart-disassembler", |
| ], |
| }, |
| }, |
| android: { |
| runtime_libs: [ |
| "libart-disassembler", |
| ], |
| }, |
| }, |
| } |
| |
| // Dependencies of libartd-compiler, used to propagate libartd-compiler deps when static linking. |
| art_cc_defaults { |
| name: "libartd-compiler_deps", |
| defaults: ["libart-compiler_common_deps"], |
| shared_libs: [ |
| "libartbased", |
| "libprofiled", |
| "libdexfiled", |
| ], |
| static_libs: ["libelffiled"], |
| codegen: { |
| arm: { |
| // VIXL assembly support for ARM targets. |
| static_libs: [ |
| "libvixld", |
| ], |
| }, |
| arm64: { |
| // VIXL assembly support for ARM64 targets. |
| static_libs: [ |
| "libvixld", |
| ], |
| }, |
| }, |
| // In order to save memory on device `art::HGraphVisualizerDisassembler` loads |
| // `libartd-disassembler.so` dynamically. Host builds of `libartd-compiler` depend on |
| // `libartd-disassembler` directly with `shared_libs` or `static_libs`. |
| target: { |
| host: { |
| shared: { |
| shared_libs: [ |
| "libartd-disassembler", |
| ], |
| }, |
| }, |
| android: { |
| runtime_libs: [ |
| "libartd-disassembler", |
| ], |
| }, |
| }, |
| } |
| |
| art_cc_defaults { |
| name: "libart-compiler-defaults", |
| defaults: ["art_defaults"], |
| host_supported: true, |
| srcs: [ |
| "debug/elf_debug_writer.cc", |
| "dex/inline_method_analyser.cc", |
| "driver/compiler_options.cc", |
| "driver/dex_compilation_unit.cc", |
| "jit/jit_compiler.cc", |
| "jit/jit_logger.cc", |
| "jni/quick/calling_convention.cc", |
| "jni/quick/jni_compiler.cc", |
| "optimizing/block_builder.cc", |
| "optimizing/block_namer.cc", |
| "optimizing/bounds_check_elimination.cc", |
| "optimizing/builder.cc", |
| "optimizing/cha_guard_optimization.cc", |
| "optimizing/code_generation_data.cc", |
| "optimizing/code_generator.cc", |
| "optimizing/code_generator_utils.cc", |
| "optimizing/code_sinking.cc", |
| "optimizing/constant_folding.cc", |
| "optimizing/constructor_fence_redundancy_elimination.cc", |
| "optimizing/data_type.cc", |
| "optimizing/dead_code_elimination.cc", |
| "optimizing/escape.cc", |
| "optimizing/graph_checker.cc", |
| "optimizing/graph_visualizer.cc", |
| "optimizing/gvn.cc", |
| "optimizing/induction_var_analysis.cc", |
| "optimizing/induction_var_range.cc", |
| "optimizing/inliner.cc", |
| "optimizing/instruction_builder.cc", |
| "optimizing/instruction_simplifier.cc", |
| "optimizing/intrinsic_objects.cc", |
| "optimizing/intrinsics.cc", |
| "optimizing/licm.cc", |
| "optimizing/linear_order.cc", |
| "optimizing/load_store_analysis.cc", |
| "optimizing/load_store_elimination.cc", |
| "optimizing/locations.cc", |
| "optimizing/loop_analysis.cc", |
| "optimizing/loop_optimization.cc", |
| "optimizing/nodes.cc", |
| "optimizing/optimization.cc", |
| "optimizing/optimizing_compiler.cc", |
| "optimizing/parallel_move_resolver.cc", |
| "optimizing/prepare_for_register_allocation.cc", |
| "optimizing/profiling_info_builder.cc", |
| "optimizing/reference_type_propagation.cc", |
| "optimizing/register_allocation_resolver.cc", |
| "optimizing/register_allocator.cc", |
| "optimizing/register_allocator_linear_scan.cc", |
| "optimizing/select_generator.cc", |
| "optimizing/scheduler.cc", |
| "optimizing/sharpening.cc", |
| "optimizing/side_effects_analysis.cc", |
| "optimizing/ssa_builder.cc", |
| "optimizing/ssa_liveness_analysis.cc", |
| "optimizing/ssa_phi_elimination.cc", |
| "optimizing/stack_map_stream.cc", |
| "optimizing/superblock_cloner.cc", |
| "optimizing/write_barrier_elimination.cc", |
| "trampolines/trampoline_compiler.cc", |
| "utils/assembler.cc", |
| "utils/jni_macro_assembler.cc", |
| "compiler.cc", |
| ], |
| |
| codegen: { |
| arm: { |
| srcs: [ |
| "jni/quick/arm/calling_convention_arm.cc", |
| "optimizing/code_generator_arm_vixl.cc", |
| "optimizing/code_generator_vector_arm_vixl.cc", |
| "optimizing/critical_native_abi_fixup_arm.cc", |
| "optimizing/instruction_simplifier_arm.cc", |
| "optimizing/instruction_simplifier_shared.cc", |
| "optimizing/intrinsics_arm_vixl.cc", |
| "optimizing/nodes_shared.cc", |
| "optimizing/scheduler_arm.cc", |
| "utils/arm/assembler_arm_vixl.cc", |
| "utils/arm/constants_arm.cc", |
| "utils/arm/jni_macro_assembler_arm_vixl.cc", |
| "utils/arm/managed_register_arm.cc", |
| ], |
| }, |
| arm64: { |
| srcs: [ |
| "jni/quick/arm64/calling_convention_arm64.cc", |
| "optimizing/code_generator_arm64.cc", |
| "optimizing/code_generator_vector_arm64_neon.cc", |
| "optimizing/code_generator_vector_arm64_sve.cc", |
| "optimizing/jit_patches_arm64.cc", |
| "optimizing/scheduler_arm64.cc", |
| "optimizing/instruction_simplifier_arm64.cc", |
| "optimizing/intrinsics_arm64.cc", |
| "utils/arm64/assembler_arm64.cc", |
| "utils/arm64/jni_macro_assembler_arm64.cc", |
| "utils/arm64/managed_register_arm64.cc", |
| ], |
| }, |
| riscv64: { |
| srcs: [ |
| "jni/quick/riscv64/calling_convention_riscv64.cc", |
| "optimizing/code_generator_riscv64.cc", |
| "optimizing/critical_native_abi_fixup_riscv64.cc", |
| "optimizing/intrinsics_riscv64.cc", |
| "utils/riscv64/assembler_riscv64.cc", |
| "utils/riscv64/jni_macro_assembler_riscv64.cc", |
| "utils/riscv64/managed_register_riscv64.cc", |
| ], |
| }, |
| x86: { |
| srcs: [ |
| "jni/quick/x86/calling_convention_x86.cc", |
| "optimizing/code_generator_x86.cc", |
| "optimizing/code_generator_vector_x86.cc", |
| "optimizing/intrinsics_x86.cc", |
| "optimizing/instruction_simplifier_x86_shared.cc", |
| "optimizing/instruction_simplifier_x86.cc", |
| "optimizing/pc_relative_fixups_x86.cc", |
| "optimizing/x86_memory_gen.cc", |
| "utils/x86/assembler_x86.cc", |
| "utils/x86/jni_macro_assembler_x86.cc", |
| "utils/x86/managed_register_x86.cc", |
| ], |
| }, |
| x86_64: { |
| srcs: [ |
| "jni/quick/x86_64/calling_convention_x86_64.cc", |
| "optimizing/intrinsics_x86_64.cc", |
| "optimizing/instruction_simplifier_x86_64.cc", |
| "optimizing/code_generator_x86_64.cc", |
| "optimizing/code_generator_vector_x86_64.cc", |
| "utils/x86_64/assembler_x86_64.cc", |
| "utils/x86_64/jni_macro_assembler_x86_64.cc", |
| "utils/x86_64/managed_register_x86_64.cc", |
| ], |
| }, |
| }, |
| generated_sources: ["art_compiler_operator_srcs"], |
| header_libs: [ |
| "art_cmdlineparser_headers", // For compiler_options. |
| "art_disassembler_headers", |
| "libnativehelper_header_only", |
| ], |
| |
| export_include_dirs: ["."], |
| } |
| |
| cc_defaults { |
| name: "libart-compiler_static_base_defaults", |
| whole_static_libs: [ |
| "libbase", |
| ], |
| } |
| |
| gensrcs { |
| name: "art_compiler_operator_srcs", |
| cmd: "$(location generate_operator_out) art/compiler $(in) > $(out)", |
| tools: ["generate_operator_out"], |
| srcs: [ |
| "linker/linker_patch.h", |
| "optimizing/locations.h", |
| "optimizing/nodes.h", |
| "optimizing/optimizing_compiler_stats.h", |
| |
| "utils/arm/constants_arm.h", |
| ], |
| output_extension: "operator_out.cc", |
| } |
| |
| art_cc_library_static { |
| name: "libart-compiler", |
| defaults: [ |
| "libart-compiler-defaults", |
| "libart-compiler_deps", |
| ], |
| target: { |
| android: { |
| lto: { |
| thin: true, |
| }, |
| }, |
| }, |
| apex_available: [ |
| "com.android.art", |
| "com.android.art.debug", |
| "test_broken_com.android.art", |
| ], |
| } |
| |
| // For static linking with gtests. Same as `libart-compiler`, but without LTO. |
| // When gtests static link a library with LTO enabled, they are also built with LTO. |
| // This makes the build process use a lot of memory. b/277207452 |
| art_cc_library_static { |
| name: "libart-compiler-for-test", |
| defaults: [ |
| "libart-compiler-defaults", |
| "libart-compiler_deps", |
| ], |
| } |
| |
| cc_defaults { |
| name: "libart-compiler_static_defaults", |
| defaults: [ |
| "libart-compiler_static_base_defaults", |
| "libart-disassembler_static_defaults", |
| "libartbase_static_defaults", |
| "libdexfile_static_defaults", |
| "libprofile_static_defaults", |
| ], |
| whole_static_libs: ["libart-compiler"], |
| } |
| |
| // libart-compiler_static_defaults for standalone gtests. |
| // Uses libart-for-test_static_defaults instead of libart_static_defaults. |
| // Uses libart-compiler-for-test instead of libart-compiler. |
| cc_defaults { |
| name: "libart-compiler-for-test_static_defaults", |
| defaults: [ |
| "libart-compiler_static_base_defaults", |
| "libart-disassembler_static_defaults", |
| "libartbase_static_defaults", |
| "libdexfile_static_defaults", |
| "libprofile_static_defaults", |
| ], |
| whole_static_libs: ["libart-compiler-for-test"], |
| } |
| |
| art_cc_library_static { |
| name: "libartd-compiler", |
| defaults: [ |
| "art_debug_defaults", |
| "libart-compiler-defaults", |
| "libartd-compiler_deps", |
| ], |
| apex_available: [ |
| "com.android.art.debug", |
| // TODO(b/183882457): This lib doesn't go into com.android.art, but |
| // apex_available lists need to be the same for internal libs to avoid |
| // stubs, and this depends on libdexfiled. |
| "com.android.art", |
| ], |
| } |
| |
| cc_defaults { |
| name: "libartd-compiler_static_defaults", |
| defaults: [ |
| "libart-compiler_static_base_defaults", |
| "libartbased_static_defaults", |
| "libartd-disassembler_static_defaults", |
| "libdexfiled_static_defaults", |
| "libprofiled_static_defaults", |
| ], |
| whole_static_libs: ["libartd-compiler"], |
| } |
| |
| // libartd-compiler_static_defaults for gtests. |
| // Uses libartd-for-test_static_defaults instead of libart_static_defaults. |
| // Note that `libartd-compiler-for-test` is not required here, because `libartd-compiler` |
| // doesn't use LTO. |
| cc_defaults { |
| name: "libartd-compiler-for-test_static_defaults", |
| defaults: [ |
| "libart-compiler_static_base_defaults", |
| "libartbased_static_defaults", |
| "libartd-disassembler_static_defaults", |
| "libdexfiled_static_defaults", |
| "libprofiled_static_defaults", |
| ], |
| whole_static_libs: ["libartd-compiler"], |
| } |
| |
| // Export headers required by `libart-runtime` to use JIT from `libart-compiler`. |
| cc_library_headers { |
| name: "libart-compiler_jit_headers", |
| defaults: ["art_defaults"], |
| host_supported: true, |
| export_include_dirs: ["export"], |
| apex_available: [ |
| "com.android.art", |
| "com.android.art.debug", |
| "test_broken_com.android.art", |
| ], |
| } |
| |
| // Properties common to `libart-compiler-gtest` and `libartd-compiler-gtest`. |
| art_cc_defaults { |
| name: "libart-compiler-gtest-common", |
| srcs: [ |
| "common_compiler_test.cc", |
| ], |
| header_libs: [ |
| "libart_headers", |
| ], |
| } |
| |
| art_cc_library_static { |
| name: "libart-compiler-gtest", |
| defaults: [ |
| "libart-gtest-defaults", |
| "libart-compiler-gtest-common", |
| "libart-compiler-for-test_static_defaults", |
| ], |
| } |
| |
| art_cc_library_static { |
| name: "libartd-compiler-gtest", |
| defaults: [ |
| "art_debug_defaults", |
| "libart-gtest-defaults", |
| "libart-compiler-gtest-common", |
| "libartd-compiler-for-test_static_defaults", |
| ], |
| } |
| |
| art_cc_defaults { |
| name: "art_compiler_tests_defaults", |
| data: [ |
| ":art-gtest-jars-ExceptionHandle", |
| ":art-gtest-jars-Interfaces", |
| ":art-gtest-jars-Main", |
| ":art-gtest-jars-MyClassNatives", |
| ], |
| tidy_timeout_srcs: [ |
| "jni/jni_compiler_test.cc", |
| "optimizing/codegen_test.cc", |
| "optimizing/constant_folding_test.cc", |
| "optimizing/induction_var_range_test.cc", |
| "optimizing/load_store_elimination_test.cc", |
| "optimizing/ssa_test.cc", |
| ], |
| srcs: [ |
| "compiler_reflection_test.cc", |
| "debug/dwarf/dwarf_test.cc", |
| "debug/src_map_elem_test.cc", |
| "exception_test.cc", |
| "jni/jni_compiler_test.cc", |
| "linker/linker_patch_test.cc", |
| "linker/output_stream_test.cc", |
| "optimizing/bounds_check_elimination_test.cc", |
| "optimizing/constant_folding_test.cc", |
| "optimizing/data_type_test.cc", |
| "optimizing/dead_code_elimination_test.cc", |
| "optimizing/dominator_test.cc", |
| "optimizing/find_loops_test.cc", |
| "optimizing/graph_checker_test.cc", |
| "optimizing/graph_test.cc", |
| "optimizing/gvn_test.cc", |
| "optimizing/induction_var_analysis_test.cc", |
| "optimizing/induction_var_range_test.cc", |
| "optimizing/licm_test.cc", |
| "optimizing/linearize_test.cc", |
| "optimizing/live_interval_test.cc", |
| "optimizing/live_ranges_test.cc", |
| "optimizing/liveness_test.cc", |
| "optimizing/loop_optimization_test.cc", |
| "optimizing/nodes_test.cc", |
| "optimizing/nodes_vector_test.cc", |
| "optimizing/parallel_move_test.cc", |
| "optimizing/pretty_printer_test.cc", |
| "optimizing/reference_type_propagation_test.cc", |
| "optimizing/select_generator_test.cc", |
| "optimizing/side_effects_test.cc", |
| "optimizing/ssa_liveness_analysis_test.cc", |
| "optimizing/ssa_test.cc", |
| "optimizing/stack_map_test.cc", |
| "optimizing/superblock_cloner_test.cc", |
| "optimizing/suspend_check_test.cc", |
| "utils/atomic_dex_ref_map_test.cc", |
| "utils/dedupe_set_test.cc", |
| |
| "optimizing/codegen_test.cc", |
| "optimizing/instruction_simplifier_test.cc", |
| "optimizing/load_store_analysis_test.cc", |
| "optimizing/load_store_elimination_test.cc", |
| "optimizing/scheduler_test.cc", |
| ], |
| |
| codegen: { |
| arm: { |
| srcs: [ |
| "utils/arm/managed_register_arm_test.cc", |
| ], |
| }, |
| arm64: { |
| srcs: [ |
| "utils/arm64/managed_register_arm64_test.cc", |
| ], |
| }, |
| riscv64: { |
| srcs: [ |
| "utils/riscv64/managed_register_riscv64_test.cc", |
| ], |
| }, |
| x86: { |
| srcs: [ |
| "utils/x86/managed_register_x86_test.cc", |
| |
| // This test is testing architecture-independent functionality, |
| // but happens to use x86 codegen as part of the test. |
| "optimizing/register_allocator_test.cc", |
| ], |
| }, |
| x86_64: { |
| srcs: [ |
| // Is this test a bit-rotten copy of the x86 test? b/77951326 |
| // "utils/x86_64/managed_register_x86_64_test.cc", |
| ], |
| }, |
| }, |
| |
| header_libs: [ |
| "libart_simulator_headers", |
| "libnativehelper_header_only", |
| ], |
| |
| target: { |
| host: { |
| shared_libs: [ |
| "libartd-simulator", |
| ], |
| }, |
| }, |
| } |
| |
| // Version of ART gtest `art_compiler_tests` bundled with the ART APEX on target. |
| // TODO(b/192274705): Remove this module when the migration to standalone ART gtests is complete. |
| art_cc_test { |
| name: "art_compiler_tests", |
| defaults: [ |
| "art_gtest_defaults", |
| "art_compiler_tests_defaults", |
| ], |
| static_libs: [ |
| "libartd-simulator-container", |
| ], |
| } |
| |
| // Standalone version of ART gtest `art_compiler_tests`, not bundled with the ART APEX on target. |
| art_cc_test { |
| name: "art_standalone_compiler_tests", |
| defaults: [ |
| "art_standalone_gtest_defaults", |
| "art_compiler_tests_defaults", |
| ], |
| data: [":generate-boot-image"], |
| static_libs: [ |
| "libart-simulator-container", |
| ], |
| test_config: "art_standalone_compiler_tests.xml", |
| } |
| |
| art_cc_test { |
| name: "art_compiler_host_tests", |
| device_supported: false, |
| defaults: [ |
| "art_gtest_defaults", |
| ], |
| srcs: [ |
| "jni/jni_cfi_test.cc", |
| "optimizing/optimizing_cfi_test.cc", |
| ], |
| tidy_timeout_srcs: [ |
| "utils/x86/assembler_x86_test.cc", |
| "utils/x86_64/assembler_x86_64_test.cc", |
| ], |
| codegen: { |
| arm: { |
| srcs: [ |
| "utils/assembler_thumb_test.cc", |
| ], |
| }, |
| riscv64: { |
| srcs: [ |
| "utils/riscv64/assembler_riscv64_test.cc", |
| "utils/riscv64/jni_macro_assembler_riscv64_test.cc", |
| ], |
| }, |
| x86: { |
| srcs: [ |
| "utils/x86/assembler_x86_test.cc", |
| ], |
| }, |
| x86_64: { |
| srcs: [ |
| "utils/x86_64/assembler_x86_64_test.cc", |
| ], |
| }, |
| }, |
| static_libs: [ |
| "libvixld", |
| ], |
| } |