runtime/nterp_helpers.cc - LeafOS-Project/android_art - Gitiles

 /*
  * Copyright (C) 2019 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "art_method-inl.h"
 #include "dex/code_item_accessors.h"
 #include "entrypoints/quick/callee_save_frame.h"
 #include "interpreter/mterp/nterp.h"
 #include "nterp_helpers.h"
 #include "oat_quick_method_header.h"
 #include "quick/quick_method_frame_info.h"

 namespace art {

 /**
  * An nterp frame follows the optimizing compiler's ABI conventions, with
  * int/long/reference parameters being passed in core registers / stack and
  * float/double parameters being passed in floating point registers / stack.
  *
  * There are no ManagedStack transitions between compiler and nterp frames.
  *
  * On entry, nterp will copy its parameters to a dex register array allocated on
  * the stack. There is a fast path when calling from nterp to nterp to not
  * follow the ABI but just copy the parameters from the caller's dex registers
  * to the callee's dex registers.
  *
  * The stack layout of an nterp frame is:
  *    ----------------
  *    |              |      All callee save registers of the platform
  *    | callee-save  |      (core and floating point).
  *    | registers    |      On x86 and x64 this includes the return address,
  *    |              |      already spilled on entry.
  *    ----------------
  *    |  alignment   |      Stack aligment of kStackAlignment.
  *    ----------------
  *    |              |      Contains `registers_size` entries (of size 4) from
  *    |    dex       |      the code item information of the method.
  *    |  registers   |
  *    |              |
  *    ----------------
  *    |              |      A copy of the dex registers above, but only
  *    |  reference   |      containing references, used for GC.
  *    |  registers   |
  *    |              |
  *    ----------------
  *    |  caller fp   |      Frame pointer of caller. Stored below the reference
  *    ----------------      registers array for easy access from nterp when returning.
  *    |  dex_pc_ptr  |      Pointer to the dex instruction being executed.
  *    ----------------      Stored whenever nterp goes into the runtime.
  *    |  alignment   |      Pointer aligment for dex_pc_ptr and caller_fp.
  *    ----------------
  *    |              |      In case nterp calls compiled code, we reserve space
  *    |     out      |      for out registers. This space will be used for
  *    |   registers  |      arguments passed on stack.
  *    |              |
  *    ----------------
  *    |  ArtMethod*  |      The method being currently executed.
  *    ----------------
  *
  *    Exception handling:
  *    Nterp follows the same convention than the compiler,
  *    with the addition of:
  *    - All catch handlers have the same landing pad.
  *    - Before doing the longjmp for exception delivery, the register containing the
  *      dex PC pointer must be updated.
  *
  *    Stack walking:
  *    An nterp frame is walked like a compiled code frame. We add an
  *    OatQuickMethodHeader prefix to the nterp entry point, which contains:
  *    - vmap_table_offset=0 (nterp doesn't need one).
  *    - code_size=NterpEnd-NterpStart
  */

 static constexpr size_t kPointerSize = static_cast<size_t>(kRuntimePointerSize);

 static constexpr size_t NterpGetFrameEntrySize(InstructionSet isa) {
   uint32_t core_spills = 0;
   uint32_t fp_spills = 0;
   // Note: the return address is considered part of the callee saves.
   switch (isa) {
     case InstructionSet::kX86:
       core_spills = x86::X86CalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
       fp_spills = x86::X86CalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
       break;
     case InstructionSet::kX86_64:
       core_spills =
           x86_64::X86_64CalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
       fp_spills = x86_64::X86_64CalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
       break;
     case InstructionSet::kArm:
     case InstructionSet::kThumb2:
       core_spills = arm::ArmCalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
       fp_spills = arm::ArmCalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
       break;
     case InstructionSet::kArm64:
       core_spills = arm64::Arm64CalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
       fp_spills = arm64::Arm64CalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
       break;
     default:
       InstructionSetAbort(isa);
   }
   // Note: the return address is considered part of the callee saves.
   return (POPCOUNT(core_spills) + POPCOUNT(fp_spills)) *
       static_cast<size_t>(InstructionSetPointerSize(isa));
 }

 size_t NterpGetFrameSize(ArtMethod* method, InstructionSet isa) {
   CodeItemDataAccessor accessor(method->DexInstructionData());
   const uint16_t num_regs = accessor.RegistersSize();
   const uint16_t out_regs = accessor.OutsSize();
   size_t pointer_size = static_cast<size_t>(InstructionSetPointerSize(isa));

   // Note: There may be two pieces of alignment but there is no need to align
   // out args to `kPointerSize` separately before aligning to kStackAlignment.
   DCHECK(IsAlignedParam(kStackAlignment, pointer_size));
   DCHECK(IsAlignedParam(NterpGetFrameEntrySize(isa), pointer_size));
   DCHECK(IsAlignedParam(kVRegSize * 2, pointer_size));
   size_t frame_size =
       NterpGetFrameEntrySize(isa) +
       (num_regs * kVRegSize) * 2 +  // dex registers and reference registers
       pointer_size +  // previous frame
       pointer_size +  // saved dex pc
       (out_regs * kVRegSize) +  // out arguments
       pointer_size;  // method
   return RoundUp(frame_size, kStackAlignment);
 }

 QuickMethodFrameInfo NterpFrameInfo(ArtMethod** frame) {
   uint32_t core_spills =
       RuntimeCalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
   uint32_t fp_spills =
       RuntimeCalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
   return QuickMethodFrameInfo(NterpGetFrameSize(*frame), core_spills, fp_spills);
 }

 uintptr_t NterpGetRegistersArray(ArtMethod** frame) {
   CodeItemDataAccessor accessor((*frame)->DexInstructionData());
   const uint16_t num_regs = accessor.RegistersSize();
   // The registers array is just above the reference array.
   return NterpGetReferenceArray(frame) + (num_regs * kVRegSize);
 }

 uintptr_t NterpGetReferenceArray(ArtMethod** frame) {
   CodeItemDataAccessor accessor((*frame)->DexInstructionData());
   const uint16_t out_regs = accessor.OutsSize();
   // The references array is just above the saved frame pointer.
   return reinterpret_cast<uintptr_t>(frame) +
       kPointerSize +  // method
       RoundUp(out_regs * kVRegSize, kPointerSize) +  // out arguments and pointer alignment
       kPointerSize +  // saved dex pc
       kPointerSize;  // previous frame.
 }

 uint32_t NterpGetDexPC(ArtMethod** frame) {
   CodeItemDataAccessor accessor((*frame)->DexInstructionData());
   const uint16_t out_regs = accessor.OutsSize();
   uintptr_t dex_pc_ptr = reinterpret_cast<uintptr_t>(frame) +
       kPointerSize +  // method
       RoundUp(out_regs * kVRegSize, kPointerSize);  // out arguments and pointer alignment
   CodeItemInstructionAccessor instructions((*frame)->DexInstructions());
   return *reinterpret_cast<const uint16_t**>(dex_pc_ptr) - instructions.Insns();
 }

 uint32_t NterpGetVReg(ArtMethod** frame, uint16_t vreg) {
   return reinterpret_cast<uint32_t*>(NterpGetRegistersArray(frame))[vreg];
 }

 uint32_t NterpGetVRegReference(ArtMethod** frame, uint16_t vreg) {
   return reinterpret_cast<uint32_t*>(NterpGetReferenceArray(frame))[vreg];
 }

 uintptr_t NterpGetCatchHandler() {
   // Nterp uses the same landing pad for all exceptions. The dex_pc_ptr set before
   // longjmp will actually be used to jmp to the catch handler.
   return reinterpret_cast<uintptr_t>(artNterpAsmInstructionEnd);
 }

 bool CanMethodUseNterp(ArtMethod* method, InstructionSet isa) {
   return !method->IsNative() &&
       method->IsInvokable() &&
       // Nterp supports the same methods the compiler supports.
       method->IsCompilable() &&
       !method->MustCountLocks() &&
       // Proxy methods do not go through the JIT like other methods, so we don't
       // run them with nterp.
       !method->IsProxyMethod() &&
       NterpGetFrameSize(method, isa) <= interpreter::kNterpMaxFrame;
 }

 }  // namespace art
	/*
	* Copyright (C) 2019 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "art_method-inl.h"
	#include "dex/code_item_accessors.h"
	#include "entrypoints/quick/callee_save_frame.h"
	#include "interpreter/mterp/nterp.h"
	#include "nterp_helpers.h"
	#include "oat_quick_method_header.h"
	#include "quick/quick_method_frame_info.h"

	namespace art {

	/**
	* An nterp frame follows the optimizing compiler's ABI conventions, with
	* int/long/reference parameters being passed in core registers / stack and
	* float/double parameters being passed in floating point registers / stack.
	*
	* There are no ManagedStack transitions between compiler and nterp frames.
	*
	* On entry, nterp will copy its parameters to a dex register array allocated on
	* the stack. There is a fast path when calling from nterp to nterp to not
	* follow the ABI but just copy the parameters from the caller's dex registers
	* to the callee's dex registers.
	*
	* The stack layout of an nterp frame is:
	* ----------------
	* \| \| All callee save registers of the platform
	* \| callee-save \| (core and floating point).
	* \| registers \| On x86 and x64 this includes the return address,
	* \| \| already spilled on entry.
	* ----------------
	* \| alignment \| Stack aligment of kStackAlignment.
	* ----------------
	* \| \| Contains `registers_size` entries (of size 4) from
	* \| dex \| the code item information of the method.
	* \| registers \|
	* \| \|
	* ----------------
	* \| \| A copy of the dex registers above, but only
	* \| reference \| containing references, used for GC.
	* \| registers \|
	* \| \|
	* ----------------
	* \| caller fp \| Frame pointer of caller. Stored below the reference
	* ---------------- registers array for easy access from nterp when returning.
	* \| dex_pc_ptr \| Pointer to the dex instruction being executed.
	* ---------------- Stored whenever nterp goes into the runtime.
	* \| alignment \| Pointer aligment for dex_pc_ptr and caller_fp.
	* ----------------
	* \| \| In case nterp calls compiled code, we reserve space
	* \| out \| for out registers. This space will be used for
	* \| registers \| arguments passed on stack.
	* \| \|
	* ----------------
	* \| ArtMethod* \| The method being currently executed.
	* ----------------
	*
	* Exception handling:
	* Nterp follows the same convention than the compiler,
	* with the addition of:
	* - All catch handlers have the same landing pad.
	* - Before doing the longjmp for exception delivery, the register containing the
	* dex PC pointer must be updated.
	*
	* Stack walking:
	* An nterp frame is walked like a compiled code frame. We add an
	* OatQuickMethodHeader prefix to the nterp entry point, which contains:
	* - vmap_table_offset=0 (nterp doesn't need one).
	* - code_size=NterpEnd-NterpStart
	*/

	static constexpr size_t kPointerSize = static_cast<size_t>(kRuntimePointerSize);

	static constexpr size_t NterpGetFrameEntrySize(InstructionSet isa) {
	uint32_t core_spills = 0;
	uint32_t fp_spills = 0;
	// Note: the return address is considered part of the callee saves.
	switch (isa) {
	case InstructionSet::kX86:
	core_spills = x86::X86CalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
	fp_spills = x86::X86CalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
	break;
	case InstructionSet::kX86_64:
	core_spills =
	x86_64::X86_64CalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
	fp_spills = x86_64::X86_64CalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
	break;
	case InstructionSet::kArm:
	case InstructionSet::kThumb2:
	core_spills = arm::ArmCalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
	fp_spills = arm::ArmCalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
	break;
	case InstructionSet::kArm64:
	core_spills = arm64::Arm64CalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
	fp_spills = arm64::Arm64CalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
	break;
	default:
	InstructionSetAbort(isa);
	}
	// Note: the return address is considered part of the callee saves.
	return (POPCOUNT(core_spills) + POPCOUNT(fp_spills)) *
	static_cast<size_t>(InstructionSetPointerSize(isa));
	}

	size_t NterpGetFrameSize(ArtMethod* method, InstructionSet isa) {
	CodeItemDataAccessor accessor(method->DexInstructionData());
	const uint16_t num_regs = accessor.RegistersSize();
	const uint16_t out_regs = accessor.OutsSize();
	size_t pointer_size = static_cast<size_t>(InstructionSetPointerSize(isa));

	// Note: There may be two pieces of alignment but there is no need to align
	// out args to `kPointerSize` separately before aligning to kStackAlignment.
	DCHECK(IsAlignedParam(kStackAlignment, pointer_size));
	DCHECK(IsAlignedParam(NterpGetFrameEntrySize(isa), pointer_size));
	DCHECK(IsAlignedParam(kVRegSize * 2, pointer_size));
	size_t frame_size =
	NterpGetFrameEntrySize(isa) +
	(num_regs * kVRegSize) * 2 + // dex registers and reference registers
	pointer_size + // previous frame
	pointer_size + // saved dex pc
	(out_regs * kVRegSize) + // out arguments
	pointer_size; // method
	return RoundUp(frame_size, kStackAlignment);
	}

	QuickMethodFrameInfo NterpFrameInfo(ArtMethod** frame) {
	uint32_t core_spills =
	RuntimeCalleeSaveFrame::GetCoreSpills(CalleeSaveType::kSaveAllCalleeSaves);
	uint32_t fp_spills =
	RuntimeCalleeSaveFrame::GetFpSpills(CalleeSaveType::kSaveAllCalleeSaves);
	return QuickMethodFrameInfo(NterpGetFrameSize(*frame), core_spills, fp_spills);
	}

	uintptr_t NterpGetRegistersArray(ArtMethod** frame) {
	CodeItemDataAccessor accessor((*frame)->DexInstructionData());
	const uint16_t num_regs = accessor.RegistersSize();
	// The registers array is just above the reference array.
	return NterpGetReferenceArray(frame) + (num_regs * kVRegSize);
	}

	uintptr_t NterpGetReferenceArray(ArtMethod** frame) {
	CodeItemDataAccessor accessor((*frame)->DexInstructionData());
	const uint16_t out_regs = accessor.OutsSize();
	// The references array is just above the saved frame pointer.
	return reinterpret_cast<uintptr_t>(frame) +
	kPointerSize + // method
	RoundUp(out_regs * kVRegSize, kPointerSize) + // out arguments and pointer alignment
	kPointerSize + // saved dex pc
	kPointerSize; // previous frame.
	}

	uint32_t NterpGetDexPC(ArtMethod** frame) {
	CodeItemDataAccessor accessor((*frame)->DexInstructionData());
	const uint16_t out_regs = accessor.OutsSize();
	uintptr_t dex_pc_ptr = reinterpret_cast<uintptr_t>(frame) +
	kPointerSize + // method
	RoundUp(out_regs * kVRegSize, kPointerSize); // out arguments and pointer alignment
	CodeItemInstructionAccessor instructions((*frame)->DexInstructions());
	return reinterpret_cast<const uint16_t*>(dex_pc_ptr) - instructions.Insns();
	}

	uint32_t NterpGetVReg(ArtMethod** frame, uint16_t vreg) {
	return reinterpret_cast<uint32_t*>(NterpGetRegistersArray(frame))[vreg];
	}

	uint32_t NterpGetVRegReference(ArtMethod** frame, uint16_t vreg) {
	return reinterpret_cast<uint32_t*>(NterpGetReferenceArray(frame))[vreg];
	}

	uintptr_t NterpGetCatchHandler() {
	// Nterp uses the same landing pad for all exceptions. The dex_pc_ptr set before
	// longjmp will actually be used to jmp to the catch handler.
	return reinterpret_cast<uintptr_t>(artNterpAsmInstructionEnd);
	}

	bool CanMethodUseNterp(ArtMethod* method, InstructionSet isa) {
	return !method->IsNative() &&
	method->IsInvokable() &&
	// Nterp supports the same methods the compiler supports.
	method->IsCompilable() &&
	!method->MustCountLocks() &&
	// Proxy methods do not go through the JIT like other methods, so we don't
	// run them with nterp.
	!method->IsProxyMethod() &&
	NterpGetFrameSize(method, isa) <= interpreter::kNterpMaxFrame;
	}

	} // namespace art