| # |
| # Copyright (C) 2011 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| LOCAL_PATH := $(call my-dir) |
| |
| art_path := $(LOCAL_PATH) |
| |
| ######################################################################## |
| # clean-oat rules |
| # |
| |
| include $(art_path)/build/Android.common_path.mk |
| |
| .PHONY: clean-oat |
| clean-oat: clean-oat-host clean-oat-target |
| |
| .PHONY: clean-oat-host |
| clean-oat-host: |
| find $(OUT_DIR) '(' -name '*.oat' -o -name '*.odex' -o -name '*.art' -o -name '*.vdex' ')' -a -type f | xargs rm -f |
| rm -rf $(TMPDIR)/*/test-*/dalvik-cache/* |
| rm -rf $(TMPDIR)/android-data/dalvik-cache/* |
| |
| .PHONY: clean-oat-target |
| clean-oat-target: |
| $(ADB) root |
| $(ADB) wait-for-device remount |
| $(ADB) shell rm -rf $(ART_TARGET_NATIVETEST_DIR) |
| $(ADB) shell rm -rf $(ART_TARGET_TEST_DIR) |
| $(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*/* |
| $(ADB) shell rm -rf $(ART_DEXPREOPT_BOOT_JAR_DIR)/$(DEX2OAT_TARGET_ARCH) |
| $(ADB) shell rm -rf system/app/$(DEX2OAT_TARGET_ARCH) |
| ifdef TARGET_2ND_ARCH |
| $(ADB) shell rm -rf $(ART_DEXPREOPT_BOOT_JAR_DIR)/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH) |
| $(ADB) shell rm -rf system/app/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH) |
| endif |
| $(ADB) shell rm -rf data/run-test/test-*/dalvik-cache/* |
| |
| ######################################################################## |
| # cpplint rules to style check art source files |
| |
| include $(art_path)/build/Android.cpplint.mk |
| |
| ######################################################################## |
| # product rules |
| |
| include $(art_path)/oatdump/Android.mk |
| include $(art_path)/tools/ahat/Android.mk |
| include $(art_path)/tools/dexfuzz/Android.mk |
| include $(art_path)/tools/veridex/Android.mk |
| |
| ART_HOST_DEPENDENCIES := \ |
| $(ART_HOST_EXECUTABLES) \ |
| $(ART_HOST_DEX_DEPENDENCIES) \ |
| $(ART_HOST_SHARED_LIBRARY_DEPENDENCIES) |
| |
| ifeq ($(ART_BUILD_HOST_DEBUG),true) |
| ART_HOST_DEPENDENCIES += $(ART_HOST_SHARED_LIBRARY_DEBUG_DEPENDENCIES) |
| endif |
| |
| ART_TARGET_DEPENDENCIES := \ |
| $(ART_TARGET_DEX_DEPENDENCIES) |
| |
| ######################################################################## |
| # test rules |
| |
| # All the dependencies that must be built ahead of sync-ing them onto the target device. |
| TEST_ART_TARGET_SYNC_DEPS := $(ADB_EXECUTABLE) |
| |
| include $(art_path)/build/Android.common_test.mk |
| include $(art_path)/build/Android.gtest.mk |
| include $(art_path)/test/Android.run-test.mk |
| |
| TEST_ART_TARGET_SYNC_DEPS += $(ART_TEST_TARGET_GTEST_DEPENDENCIES) $(ART_TEST_TARGET_RUN_TEST_DEPENDENCIES) |
| |
| # Make sure /system is writable on the device. |
| TEST_ART_ADB_ROOT_AND_REMOUNT := \ |
| ($(ADB) root && \ |
| $(ADB) wait-for-device remount && \ |
| (($(ADB) shell touch /system/testfile && \ |
| ($(ADB) shell rm /system/testfile || true)) || \ |
| ($(ADB) disable-verity && \ |
| $(ADB) reboot && \ |
| $(ADB) wait-for-device root && \ |
| $(ADB) wait-for-device remount))) |
| |
| # "mm test-art" to build and run all tests on host and device |
| .PHONY: test-art |
| test-art: test-art-host test-art-target |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-gtest |
| test-art-gtest: test-art-host-gtest test-art-target-gtest |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-run-test |
| test-art-run-test: test-art-host-run-test test-art-target-run-test |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| ######################################################################## |
| # host test rules |
| |
| VIXL_TEST_DEPENDENCY := |
| # We can only run the vixl tests on 64-bit hosts (vixl testing issue) when its a |
| # top-level build (to declare the vixl test rule). |
| ifneq ($(HOST_PREFER_32_BIT),true) |
| ifeq ($(ONE_SHOT_MAKEFILE),) |
| VIXL_TEST_DEPENDENCY := run-vixl-tests |
| endif |
| endif |
| |
| .PHONY: test-art-host-vixl |
| test-art-host-vixl: $(VIXL_TEST_DEPENDENCY) |
| |
| # "mm test-art-host" to build and run all host tests. |
| .PHONY: test-art-host |
| test-art-host: test-art-host-gtest test-art-host-run-test \ |
| test-art-host-vixl test-art-host-dexdump |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All host tests that run solely with the default compiler. |
| .PHONY: test-art-host-default |
| test-art-host-default: test-art-host-run-test-default |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All host tests that run solely with the optimizing compiler. |
| .PHONY: test-art-host-optimizing |
| test-art-host-optimizing: test-art-host-run-test-optimizing |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All host tests that run solely on the interpreter. |
| .PHONY: test-art-host-interpreter |
| test-art-host-interpreter: test-art-host-run-test-interpreter |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All host tests that run solely on the jit. |
| .PHONY: test-art-host-jit |
| test-art-host-jit: test-art-host-run-test-jit |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # Primary host architecture variants: |
| .PHONY: test-art-host$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-gtest$(ART_PHONY_TEST_HOST_SUFFIX) \ |
| test-art-host-run-test$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-default$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-default$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-default$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-optimizing$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-optimizing$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-optimizing$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-interpreter$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-interpreter$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-interpreter$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-jit$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-jit$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-jit$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # Secondary host architecture variants: |
| ifneq ($(HOST_PREFER_32_BIT),true) |
| .PHONY: test-art-host$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-gtest$(2ND_ART_PHONY_TEST_HOST_SUFFIX) \ |
| test-art-host-run-test$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| endif |
| |
| # Dexdump/list regression test. |
| .PHONY: test-art-host-dexdump |
| test-art-host-dexdump: $(addprefix $(HOST_OUT_EXECUTABLES)/, dexdump dexlist) |
| ANDROID_HOST_OUT=$(realpath $(HOST_OUT)) art/test/dexdump/run-all-tests |
| |
| ######################################################################## |
| # target test rules |
| |
| # "mm test-art-target" to build and run all target tests. |
| .PHONY: test-art-target |
| test-art-target: test-art-target-gtest test-art-target-run-test |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All target tests that run solely with the default compiler. |
| .PHONY: test-art-target-default |
| test-art-target-default: test-art-target-run-test-default |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All target tests that run solely with the optimizing compiler. |
| .PHONY: test-art-target-optimizing |
| test-art-target-optimizing: test-art-target-run-test-optimizing |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All target tests that run solely on the interpreter. |
| .PHONY: test-art-target-interpreter |
| test-art-target-interpreter: test-art-target-run-test-interpreter |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All target tests that run solely on the jit. |
| .PHONY: test-art-target-jit |
| test-art-target-jit: test-art-target-run-test-jit |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # Primary target architecture variants: |
| .PHONY: test-art-target$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-gtest$(ART_PHONY_TEST_TARGET_SUFFIX) \ |
| test-art-target-run-test$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-default$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-default$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-default$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-jit$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-jit$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-jit$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # Secondary target architecture variants: |
| ifdef 2ND_ART_PHONY_TEST_TARGET_SUFFIX |
| .PHONY: test-art-target$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-gtest$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) \ |
| test-art-target-run-test$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| endif |
| |
| ####################### |
| # Reset LOCAL_PATH because previous includes may override its value. |
| # Keep this after all "include $(art_path)/..." are done, and before any |
| # "include $(BUILD_...)". |
| LOCAL_PATH := $(art_path) |
| |
| # Create canonical name -> file name symlink in the symbol directory for the |
| # debug APEX. The symbol files for it are installed to |
| # $(TARGET_OUT_UNSTRIPPED)/apex/com.android.art.debug. However, since it's |
| # available via /apex/com.android.art at runtime, create a symlink so that |
| # $(TARGET_OUT_UNSTRIPPED)/apex/com.android.art is linked to |
| # $(TARGET_OUT_UNSTRIPPED)/apex/$(TARGET_ART_APEX). We skip this for the release |
| # APEX which has com.android.art as $(TARGET_ART_APEX). Note that installation |
| # of the symlink is triggered by the apex_manifest.pb file which is the file |
| # that is guaranteed to be created regardless of the value of |
| # TARGET_FLATTEN_APEX. |
| # TODO(b/171419613): the symlink is disabled because the |
| # $OUT/symbols/apex/com.android.art name is taken by the com.android.art apex |
| # even when com.android.art.debug is selected by TARGET_ART_APEX. |
| # Disabling the symlink means that symbols for the com.android.art.debug apex |
| # will not be found. |
| ifeq ($(TARGET_FLATTEN_APEX),true) |
| art_apex_manifest_file := $(PRODUCT_OUT)/system/apex/$(TARGET_ART_APEX)/apex_manifest.pb |
| else |
| art_apex_manifest_file := $(PRODUCT_OUT)/apex/$(TARGET_ART_APEX)/apex_manifest.pb |
| endif |
| |
| art_apex_symlink_timestamp := $(call intermediates-dir-for,FAKE,com.android.art)/symlink.timestamp |
| $(art_apex_manifest_file): $(art_apex_symlink_timestamp) |
| $(art_apex_manifest_file): PRIVATE_LINK_NAME := $(TARGET_OUT_UNSTRIPPED)/apex/com.android.art |
| $(art_apex_symlink_timestamp): |
| #ifeq ($(TARGET_ART_APEX),com.android.art) |
| # $(hide) if [ -L $(PRIVATE_LINK_NAME) ]; then rm -f $(PRIVATE_LINK_NAME); fi |
| #else |
| # $(hide) mkdir -p $(dir $(PRIVATE_LINK_NAME)) |
| # $(hide) rm -rf $(PRIVATE_LINK_NAME) |
| # $(hide) ln -sf $(TARGET_ART_APEX) $(PRIVATE_LINK_NAME) |
| #endif |
| $(hide) touch $@ |
| $(art_apex_symlink_timestamp): .KATI_SYMLINK_OUTPUTS := $(PRIVATE_LINK_NAME) |
| |
| art_apex_manifest_file := |
| |
| ####################### |
| # Fake packages for ART |
| |
| # The art-runtime package depends on the core ART libraries and binaries. It exists so we can |
| # manipulate the set of things shipped, e.g., add debug versions and so on. |
| |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := art-runtime |
| |
| # Reference the libraries and binaries in the appropriate APEX module, because |
| # they don't have platform variants. However if |
| # SOONG_CONFIG_art_module_source_build isn't true then the APEX modules are |
| # disabled, so Soong won't apply the APEX mutators to them, and then they are |
| # available with their plain names. |
| ifeq (true,$(SOONG_CONFIG_art_module_source_build)) |
| art_module_lib = $(1).com.android.art |
| art_module_debug_lib = $(1).com.android.art.debug |
| else |
| art_module_lib = $(1) |
| art_module_debug_lib = $(1) |
| endif |
| |
| # Base requirements. |
| LOCAL_REQUIRED_MODULES := \ |
| $(call art_module_lib,dalvikvm) \ |
| $(call art_module_lib,dex2oat) \ |
| $(call art_module_lib,dexoptanalyzer) \ |
| $(call art_module_lib,libart) \ |
| $(call art_module_lib,libart-compiler) \ |
| $(call art_module_lib,libopenjdkjvm) \ |
| $(call art_module_lib,libopenjdkjvmti) \ |
| $(call art_module_lib,odrefresh) \ |
| $(call art_module_lib,profman) \ |
| $(call art_module_lib,libadbconnection) \ |
| $(call art_module_lib,libperfetto_hprof) \ |
| |
| # Potentially add in debug variants: |
| # |
| # * We will never add them if PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD = false. |
| # * We will always add them if PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD = true. |
| # * Otherwise, we will add them by default to userdebug and eng builds. |
| art_target_include_debug_build := $(PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD) |
| ifneq (false,$(art_target_include_debug_build)) |
| ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT))) |
| art_target_include_debug_build := true |
| endif |
| ifeq (true,$(art_target_include_debug_build)) |
| LOCAL_REQUIRED_MODULES += \ |
| $(call art_module_debug_lib,dex2oatd) \ |
| $(call art_module_debug_lib,dexoptanalyzerd) \ |
| $(call art_module_debug_lib,libartd) \ |
| $(call art_module_debug_lib,libartd-compiler) \ |
| $(call art_module_debug_lib,libopenjdkd) \ |
| $(call art_module_debug_lib,libopenjdkjvmd) \ |
| $(call art_module_debug_lib,libopenjdkjvmtid) \ |
| $(call art_module_debug_lib,profmand) \ |
| $(call art_module_debug_lib,libadbconnectiond) \ |
| $(call art_module_debug_lib,libperfetto_hprofd) \ |
| |
| endif |
| endif |
| |
| art_module_lib := |
| art_module_debug_lib := |
| |
| include $(BUILD_PHONY_PACKAGE) |
| |
| # The art-tools package depends on helpers and tools that are useful for developers. Similar |
| # dependencies exist for the APEX builds for these tools (see build/apex/Android.bp). |
| |
| ifneq ($(HOST_OS),darwin) |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := art-tools |
| LOCAL_IS_HOST_MODULE := true |
| LOCAL_REQUIRED_MODULES := \ |
| ahat \ |
| dexdump \ |
| hprof-conv \ |
| |
| # A subset of the tools are disabled when HOST_PREFER_32_BIT is defined as make reports that |
| # they are not supported on host (b/129323791). This is likely due to art_apex disabling host |
| # APEX builds when HOST_PREFER_32_BIT is set (b/120617876). |
| ifneq ($(HOST_PREFER_32_BIT),true) |
| LOCAL_REQUIRED_MODULES += \ |
| dexdiag \ |
| dexlist \ |
| oatdump \ |
| |
| endif |
| |
| include $(BUILD_PHONY_PACKAGE) |
| endif # HOST_OS != darwin |
| |
| #################################################################################################### |
| # Fake packages to ensure generation of libopenjdkd when one builds with mm/mmm/mmma. |
| # |
| # The library is required for starting a runtime in debug mode, but libartd does not depend on it |
| # (dependency cycle otherwise). |
| # |
| # Note: * As the package is phony to create a dependency the package name is irrelevant. |
| # * We make MULTILIB explicit to "both," just to state here that we want both libraries on |
| # 64-bit systems, even if it is the default. |
| |
| # ART on the host. |
| ifneq ($(HOST_OS),darwin) |
| ifeq ($(ART_BUILD_HOST_DEBUG),true) |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := art-libartd-libopenjdkd-host-dependency |
| LOCAL_MULTILIB := both |
| LOCAL_REQUIRED_MODULES := libopenjdkd |
| LOCAL_IS_HOST_MODULE := true |
| include $(BUILD_PHONY_PACKAGE) |
| endif |
| endif # HOST_OS != darwin |
| |
| ######################################################################## |
| # "m build-art" for quick minimal build |
| .PHONY: build-art |
| build-art: build-art-host build-art-target |
| |
| # For host, we extract the ICU data from the apex and install it to HOST_OUT/I18N_APEX. |
| $(HOST_I18N_DATA): $(TARGET_OUT)/apex/$(I18N_APEX).apex $(HOST_OUT)/bin/deapexer |
| $(call extract-from-apex,$(I18N_APEX)) |
| rm -rf $(HOST_OUT)/$(I18N_APEX) |
| mkdir -p $(HOST_OUT)/$(I18N_APEX)/ |
| cp -R $(TARGET_OUT)/apex/$(I18N_APEX)/etc/ $(HOST_OUT)/$(I18N_APEX)/ |
| touch $@ |
| |
| $(HOST_TZDATA_DATA): $(TARGET_OUT)/apex/$(TZDATA_APEX).apex $(HOST_OUT)/bin/deapexer |
| $(call extract-from-apex,$(TZDATA_APEX)) |
| rm -rf $(HOST_OUT)/$(TZDATA_APEX) |
| mkdir -p $(HOST_OUT)/$(TZDATA_APEX)/ |
| cp -R $(TARGET_OUT)/apex/$(TZDATA_APEX)/etc/ $(HOST_OUT)/$(TZDATA_APEX)/ |
| touch $@ |
| |
| .PHONY: build-art-host |
| build-art-host: $(HOST_OUT_EXECUTABLES)/art $(ART_HOST_DEPENDENCIES) $(HOST_CORE_IMG_OUTS) $(HOST_I18N_DATA) $(HOST_TZDATA_DATA) |
| |
| .PHONY: build-art-target |
| build-art-target: $(TARGET_OUT_EXECUTABLES)/art $(ART_TARGET_DEPENDENCIES) $(TARGET_CORE_IMG_OUTS) |
| |
| PRIVATE_ART_APEX_DEPENDENCY_FILES := \ |
| bin/dalvikvm32 \ |
| bin/dalvikvm64 \ |
| bin/dalvikvm \ |
| bin/dex2oat32 \ |
| bin/dex2oat64 \ |
| bin/dexdump \ |
| |
| PRIVATE_ART_APEX_DEPENDENCY_LIBS := \ |
| lib/libadbconnection.so \ |
| lib/libandroidio.so \ |
| lib/libartbase.so \ |
| lib/libart-compiler.so \ |
| lib/libart-dexlayout.so \ |
| lib/libart-disassembler.so \ |
| lib/libartpalette.so \ |
| lib/libart.so \ |
| lib/libbacktrace.so \ |
| lib/libdexfile_external.so \ |
| lib/libdexfile_support.so \ |
| lib/libdexfile.so \ |
| lib/libdt_fd_forward.so \ |
| lib/libdt_socket.so \ |
| lib/libexpat.so \ |
| lib/libjavacore.so \ |
| lib/libjdwp.so \ |
| lib/liblzma.so \ |
| lib/libmeminfo.so \ |
| lib/libnativebridge.so \ |
| lib/libnativehelper.so \ |
| lib/libnativeloader.so \ |
| lib/libnpt.so \ |
| lib/libopenjdkjvm.so \ |
| lib/libopenjdkjvmti.so \ |
| lib/libopenjdk.so \ |
| lib/libpac.so \ |
| lib/libprocinfo.so \ |
| lib/libprofile.so \ |
| lib/libsigchain.so \ |
| lib/libunwindstack.so \ |
| lib/libvixl.so \ |
| lib/libziparchive.so \ |
| lib64/libadbconnection.so \ |
| lib64/libandroidio.so \ |
| lib64/libartbase.so \ |
| lib64/libart-compiler.so \ |
| lib64/libart-dexlayout.so \ |
| lib64/libart-disassembler.so \ |
| lib64/libartpalette.so \ |
| lib64/libart.so \ |
| lib64/libbacktrace.so \ |
| lib64/libdexfile_external.so \ |
| lib64/libdexfile_support.so \ |
| lib64/libdexfile.so \ |
| lib64/libdt_fd_forward.so \ |
| lib64/libdt_socket.so \ |
| lib64/libexpat.so \ |
| lib64/libjavacore.so \ |
| lib64/libjdwp.so \ |
| lib64/liblzma.so \ |
| lib64/libmeminfo.so \ |
| lib64/libnativebridge.so \ |
| lib64/libnativehelper.so \ |
| lib64/libnativeloader.so \ |
| lib64/libnpt.so \ |
| lib64/libopenjdkjvm.so \ |
| lib64/libopenjdkjvmti.so \ |
| lib64/libopenjdk.so \ |
| lib64/libpac.so \ |
| lib64/libprocinfo.so \ |
| lib64/libprofile.so \ |
| lib64/libsigchain.so \ |
| lib64/libunwindstack.so \ |
| lib64/libvixl.so \ |
| lib64/libziparchive.so \ |
| |
| PRIVATE_RUNTIME_APEX_DEPENDENCY_FILES := \ |
| bin/linker \ |
| bin/linker64 \ |
| lib/bionic/libc.so \ |
| lib/bionic/libdl.so \ |
| lib/bionic/libdl_android.so \ |
| lib/bionic/libm.so \ |
| lib64/bionic/libc.so \ |
| lib64/bionic/libdl.so \ |
| lib64/bionic/libdl_android.so \ |
| lib64/bionic/libm.so \ |
| |
| PRIVATE_CONSCRYPT_APEX_DEPENDENCY_LIBS := \ |
| lib/libcrypto.so \ |
| lib/libjavacrypto.so \ |
| lib/libssl.so \ |
| lib64/libcrypto.so \ |
| lib64/libjavacrypto.so \ |
| lib64/libssl.so \ |
| |
| PRIVATE_I18N_APEX_DEPENDENCY_LIBS := \ |
| lib/libicu.so \ |
| lib/libicui18n.so \ |
| lib/libicu_jni.so \ |
| lib/libicuuc.so \ |
| lib64/libicu.so \ |
| lib64/libicui18n.so \ |
| lib64/libicu_jni.so \ |
| lib64/libicuuc.so \ |
| |
| # Extracts files from an APEX into a location. The APEX can be either a .apex |
| # file in $(TARGET_OUT)/apex, or a directory in the same location. Files are |
| # extracted to $(TARGET_OUT) with the same relative paths as under the APEX |
| # root. |
| # $(1): APEX base name |
| # $(2): List of files to extract, with paths relative to the APEX root |
| # |
| # "cp -d" below doesn't work on Darwin, but this is only used for Golem builds |
| # and won't run on mac anyway. |
| define extract-from-apex |
| apex_root=$(TARGET_OUT)/apex && \ |
| apex_file=$$apex_root/$(1).apex && \ |
| apex_dir=$$apex_root/$(1) && \ |
| if [ -f $$apex_file ]; then \ |
| rm -rf $$apex_dir && \ |
| mkdir -p $$apex_dir && \ |
| debugfs=$(HOST_OUT)/bin/debugfs_static && \ |
| $(HOST_OUT)/bin/deapexer --debugfs_path $$debugfs extract $$apex_file $$apex_dir; \ |
| fi && \ |
| for f in $(2); do \ |
| sf=$$apex_dir/$$f && \ |
| df=$(TARGET_OUT)/$$f && \ |
| if [ -f $$sf -o -h $$sf ]; then \ |
| mkdir -p $$(dirname $$df) && \ |
| cp -fd $$sf $$df; \ |
| fi || exit 1; \ |
| done |
| endef |
| |
| # Copy or extract some required files from APEXes to the `system` (TARGET_OUT) |
| # directory. This is dangerous as these files could inadvertently stay in this |
| # directory and be included in a system image. |
| # |
| # This target is only used by Golem now. |
| # |
| # NB Android build does not use cp from: |
| # $ANDROID_BUILD_TOP/prebuilts/build-tools/path/{linux-x86,darwin-x86} |
| # which has a non-standard set of command-line flags. |
| # |
| # TODO(b/129332183): Remove this when Golem has full support for the |
| # ART APEX. |
| .PHONY: standalone-apex-files |
| standalone-apex-files: deapexer \ |
| $(RELEASE_ART_APEX) \ |
| $(RUNTIME_APEX) \ |
| $(CONSCRYPT_APEX) \ |
| $(I18N_APEX) \ |
| $(TZDATA_APEX) |
| $(call extract-from-apex,$(RELEASE_ART_APEX),\ |
| $(PRIVATE_ART_APEX_DEPENDENCY_LIBS) $(PRIVATE_ART_APEX_DEPENDENCY_FILES)) |
| # The Runtime APEX has the Bionic libs in ${LIB}/bionic subdirectories, |
| # so we need to move them up a level after extraction. |
| # Also, platform libraries are installed in prebuilts, so copy them over. |
| $(call extract-from-apex,$(RUNTIME_APEX),\ |
| $(PRIVATE_RUNTIME_APEX_DEPENDENCY_FILES)) && \ |
| for libdir in $(TARGET_OUT)/lib $(TARGET_OUT)/lib64; do \ |
| if [ -d $$libdir/bionic ]; then \ |
| mv -f $$libdir/bionic/*.so $$libdir; \ |
| fi || exit 1; \ |
| done && \ |
| for libdir in $(TARGET_OUT)/lib $(TARGET_OUT)/lib64; do \ |
| if [ -d $$libdir ]; then \ |
| cp prebuilts/runtime/mainline/platform/impl/$(TARGET_ARCH)/*.so $$libdir; \ |
| fi || exit 1; \ |
| done |
| $(call extract-from-apex,$(CONSCRYPT_APEX),\ |
| $(PRIVATE_CONSCRYPT_APEX_DEPENDENCY_LIBS)) |
| $(call extract-from-apex,$(I18N_APEX),\ |
| $(PRIVATE_I18N_APEX_DEPENDENCY_LIBS)) |
| $(call extract-from-apex,$(TZDATA_APEX),) |
| |
| ######################################################################## |
| # Phony target for only building what go/lem requires for pushing ART on /data. |
| |
| .PHONY: build-art-target-golem |
| # Also include libartbenchmark, we always include it when running golem. |
| # libstdc++ is needed when building for ART_TARGET_LINUX. |
| |
| # Also include the Bionic libraries (libc, libdl, libdl_android, libm) and |
| # linker. |
| # |
| # TODO(b/129332183): Remove this when Golem has full support for the |
| # ART APEX. |
| |
| ART_TARGET_SHARED_LIBRARY_BENCHMARK := $(TARGET_OUT_SHARED_LIBRARIES)/libartbenchmark.so |
| ART_TARGET_SHARED_LIBRARY_PALETTE_DEPENDENCIES := \ |
| $(TARGET_OUT_SHARED_LIBRARIES)/libcutils.so \ |
| $(TARGET_OUT_SHARED_LIBRARIES)/libprocessgroup.so \ |
| $(TARGET_OUT_SHARED_LIBRARIES)/libselinux.so \ |
| $(TARGET_OUT_SHARED_LIBRARIES)/libtombstoned_client.so |
| |
| build-art-target-golem: $(RELEASE_ART_APEX) com.android.runtime $(CONSCRYPT_APEX) \ |
| $(TARGET_OUT_EXECUTABLES)/art \ |
| $(TARGET_OUT_EXECUTABLES)/dex2oat_wrapper \ |
| $(TARGET_OUT)/etc/public.libraries.txt \ |
| $(ART_TARGET_SHARED_LIBRARY_BENCHMARK) \ |
| $(ART_TARGET_SHARED_LIBRARY_PALETTE_DEPENDENCIES) \ |
| $(TARGET_OUT_SHARED_LIBRARIES)/libz.so \ |
| $(TARGET_OUT_SHARED_LIBRARIES)/liblz4.so \ |
| libartpalette-system \ |
| standalone-apex-files |
| # remove debug libraries from public.libraries.txt because golem builds |
| # won't have it. |
| sed -i '/libartd.so/d' $(TARGET_OUT)/etc/public.libraries.txt |
| sed -i '/libdexfiled.so/d' $(TARGET_OUT)/etc/public.libraries.txt |
| sed -i '/libprofiled.so/d' $(TARGET_OUT)/etc/public.libraries.txt |
| sed -i '/libartbased.so/d' $(TARGET_OUT)/etc/public.libraries.txt |
| |
| ######################################################################## |
| # Phony target for building what go/lem requires on host. |
| .PHONY: build-art-host-golem |
| # Also include libartbenchmark, we always include it when running golem. |
| ART_HOST_SHARED_LIBRARY_BENCHMARK := $(ART_HOST_OUT_SHARED_LIBRARIES)/libartbenchmark.so |
| build-art-host-golem: build-art-host \ |
| $(ART_HOST_SHARED_LIBRARY_BENCHMARK) \ |
| $(HOST_OUT_EXECUTABLES)/dex2oat_wrapper |
| |
| ######################################################################## |
| # Phony target for building what go/lem requires for syncing /system to target. |
| .PHONY: build-art-unbundled-golem |
| art_apex_jars := $(foreach pair,$(ART_APEX_JARS), $(call word-colon,2,$(pair))) |
| build-art-unbundled-golem: art-runtime linker oatdump $(art_apex_jars) conscrypt crash_dump |
| |
| ######################################################################## |
| # Rules for building all dependencies for tests. |
| |
| .PHONY: build-art-host-tests |
| build-art-host-tests: build-art-host $(TEST_ART_RUN_TEST_DEPENDENCIES) $(ART_TEST_HOST_RUN_TEST_DEPENDENCIES) $(ART_TEST_HOST_GTEST_DEPENDENCIES) | $(TEST_ART_RUN_TEST_ORDERONLY_DEPENDENCIES) |
| |
| .PHONY: build-art-target-tests |
| build-art-target-tests: build-art-target $(TEST_ART_RUN_TEST_DEPENDENCIES) $(ART_TEST_TARGET_RUN_TEST_DEPENDENCIES) $(ART_TEST_TARGET_GTEST_DEPENDENCIES) | $(TEST_ART_RUN_TEST_ORDERONLY_DEPENDENCIES) |
| |
| ######################################################################## |
| # targets to switch back and forth from libdvm to libart |
| |
| .PHONY: use-art |
| use-art: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| $(ADB) shell start |
| |
| .PHONY: use-artd |
| use-artd: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so |
| $(ADB) shell start |
| |
| .PHONY: use-dalvik |
| use-dalvik: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libdvm.so |
| $(ADB) shell start |
| |
| .PHONY: use-art-full |
| use-art-full: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| $(ADB) shell setprop dalvik.vm.dex2oat-filter \"\" |
| $(ADB) shell setprop dalvik.vm.image-dex2oat-filter \"\" |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| $(ADB) shell setprop dalvik.vm.usejit false |
| $(ADB) shell start |
| |
| .PHONY: use-artd-full |
| use-artd-full: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| $(ADB) shell setprop dalvik.vm.dex2oat-filter \"\" |
| $(ADB) shell setprop dalvik.vm.image-dex2oat-filter \"\" |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so |
| $(ADB) shell setprop dalvik.vm.usejit false |
| $(ADB) shell start |
| |
| .PHONY: use-art-jit |
| use-art-jit: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| $(ADB) shell setprop dalvik.vm.dex2oat-filter "verify-at-runtime" |
| $(ADB) shell setprop dalvik.vm.image-dex2oat-filter "verify-at-runtime" |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| $(ADB) shell setprop dalvik.vm.usejit true |
| $(ADB) shell start |
| |
| .PHONY: use-art-interpret-only |
| use-art-interpret-only: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| $(ADB) shell setprop dalvik.vm.dex2oat-filter "interpret-only" |
| $(ADB) shell setprop dalvik.vm.image-dex2oat-filter "interpret-only" |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| $(ADB) shell setprop dalvik.vm.usejit false |
| $(ADB) shell start |
| |
| .PHONY: use-artd-interpret-only |
| use-artd-interpret-only: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| $(ADB) shell setprop dalvik.vm.dex2oat-filter "interpret-only" |
| $(ADB) shell setprop dalvik.vm.image-dex2oat-filter "interpret-only" |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so |
| $(ADB) shell setprop dalvik.vm.usejit false |
| $(ADB) shell start |
| |
| .PHONY: use-art-verify-none |
| use-art-verify-none: |
| $(ADB) root |
| $(ADB) wait-for-device shell stop |
| $(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| $(ADB) shell setprop dalvik.vm.dex2oat-filter "verify-none" |
| $(ADB) shell setprop dalvik.vm.image-dex2oat-filter "verify-none" |
| $(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| $(ADB) shell setprop dalvik.vm.usejit false |
| $(ADB) shell start |
| |
| ######################################################################## |
| |
| # Clear locally used variables. |
| TEST_ART_TARGET_SYNC_DEPS := |
| |
| # Helper target that depends on boot image creation. |
| # |
| # Can be used, for example, to dump initialization failures: |
| # m art-boot-image ART_BOOT_IMAGE_EXTRA_ARGS=--dump-init-failures=fails.txt |
| .PHONY: art-boot-image |
| art-boot-image: $(DEXPREOPT_IMAGE_boot_$(TARGET_ARCH)) |
| |
| .PHONY: art-job-images |
| art-job-images: \ |
| art-boot-image \ |
| $(2ND_DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME) \ |
| $(HOST_OUT_EXECUTABLES)/dex2oats \ |
| $(HOST_OUT_EXECUTABLES)/dex2oatds \ |
| $(HOST_OUT_EXECUTABLES)/profman |
| |
| ######################################################################## |
| |
| # Build a target that contains dex public SDK stubs for SDK version in the list. |
| # Zip files structure: |
| # public-sdk-28-stub.zip |
| # classes.dex |
| # public-sdk-29-stub.zip |
| # classes.dex |
| # public-sdk-30-stub.zip |
| # classes.dex |
| MIN_SDK_VERSION := 28 |
| SDK_VERSIONS := $(call numbers_greater_or_equal_to,$(MIN_SDK_VERSION),$(TARGET_AVAIALBLE_SDK_VERSIONS)) |
| |
| # Create dex public SDK stubs. |
| define get_public_sdk_stub_dex |
| $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/public_sdk_$(1)_stub_intermediates/classes.dex |
| endef |
| |
| # The input is the SDK version. |
| define create_public_sdk_dex |
| public_sdk_$(1)_stub := $$(call get_public_sdk_stub_dex,$(1)) |
| $$(public_sdk_$(1)_stub): PRIVATE_MIN_SDK_VERSION := $(1) |
| $$(public_sdk_$(1)_stub): $$(call resolve-prebuilt-sdk-jar-path,$(1)) $$(DX) $$(ZIP2ZIP) |
| $$(transform-classes.jar-to-dex) |
| endef |
| |
| $(foreach version,$(SDK_VERSIONS),$(eval $(call create_public_sdk_dex,$(version)))) |
| |
| # Create dex public SDK stubs zip. |
| define get_public_sdk_stub_zip |
| $(call intermediates-dir-for,PACKAGING,public_sdk_stub,HOST)/public-sdk-$(1)-stub.zip |
| endef |
| |
| define create_public_sdk_zip |
| PUBLIC_SDK_$(1)_STUB_ZIP_PATH := $$(call get_public_sdk_stub_zip,$(1)) |
| $$(PUBLIC_SDK_$(1)_STUB_ZIP_PATH): PRIVATE_SDK_STUBS_DEX_DIR := $$(dir $$(public_sdk_$(1)_stub)) |
| $$(PUBLIC_SDK_$(1)_STUB_ZIP_PATH): $$(SOONG_ZIP) $$(public_sdk_$(1)_stub) |
| rm -f $$@ |
| $$(SOONG_ZIP) -o $$@ -C $$(PRIVATE_SDK_STUBS_DEX_DIR) -D $$(PRIVATE_SDK_STUBS_DEX_DIR) |
| endef |
| |
| $(foreach version,$(SDK_VERSIONS),$(eval $(call create_public_sdk_zip,$(version)))) |
| |
| # Make the zip files available for prebuilts. |
| $(foreach version,$(SDK_VERSIONS),$(call dist-for-goals,sdk,$(call get_public_sdk_stub_zip,$(version)))) |
| |
| STUB_ZIP_FILES = $(foreach version,$(SDK_VERSIONS),$(call get_public_sdk_stub_zip,$(version))) |
| |
| .PHONY: public_sdk_stubs |
| public_sdk_stubs: $(STUB_ZIP_FILES) |
| |
| MIN_SDK_VERSION := |
| SDK_VERSIONS := |
| |