| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ART_COMPILER_DEBUG_ELF_DEBUG_LOC_WRITER_H_ |
| #define ART_COMPILER_DEBUG_ELF_DEBUG_LOC_WRITER_H_ |
| |
| #include <cstring> |
| #include <map> |
| |
| #include "arch/instruction_set.h" |
| #include "base/macros.h" |
| #include "debug/method_debug_info.h" |
| #include "dwarf/debug_info_entry_writer.h" |
| #include "dwarf/register.h" |
| #include "oat/stack_map.h" |
| |
| namespace art HIDDEN { |
| namespace debug { |
| using Reg = dwarf::Reg; |
| |
| static Reg GetDwarfCoreReg(InstructionSet isa, int machine_reg) { |
| switch (isa) { |
| case InstructionSet::kArm: |
| case InstructionSet::kThumb2: |
| return Reg::ArmCore(machine_reg); |
| case InstructionSet::kArm64: |
| return Reg::Arm64Core(machine_reg); |
| case InstructionSet::kRiscv64: |
| return Reg::Riscv64Core(machine_reg); |
| case InstructionSet::kX86: |
| return Reg::X86Core(machine_reg); |
| case InstructionSet::kX86_64: |
| return Reg::X86_64Core(machine_reg); |
| case InstructionSet::kNone: |
| LOG(FATAL) << "No instruction set"; |
| } |
| UNREACHABLE(); |
| } |
| |
| static Reg GetDwarfFpReg(InstructionSet isa, int machine_reg) { |
| switch (isa) { |
| case InstructionSet::kArm: |
| case InstructionSet::kThumb2: |
| return Reg::ArmFp(machine_reg); |
| case InstructionSet::kArm64: |
| return Reg::Arm64Fp(machine_reg); |
| case InstructionSet::kRiscv64: |
| return Reg::Riscv64Fp(machine_reg); |
| case InstructionSet::kX86: |
| return Reg::X86Fp(machine_reg); |
| case InstructionSet::kX86_64: |
| return Reg::X86_64Fp(machine_reg); |
| case InstructionSet::kNone: |
| LOG(FATAL) << "No instruction set"; |
| } |
| UNREACHABLE(); |
| } |
| |
| struct VariableLocation { |
| uint32_t low_pc; // Relative to compilation unit. |
| uint32_t high_pc; // Relative to compilation unit. |
| DexRegisterLocation reg_lo; // May be None if the location is unknown. |
| DexRegisterLocation reg_hi; // Most significant bits of 64-bit value. |
| }; |
| |
| // Get the location of given dex register (e.g. stack or machine register). |
| // Note that the location might be different based on the current pc. |
| // The result will cover all ranges where the variable is in scope. |
| // PCs corresponding to stackmap with dex register map are accurate, |
| // all other PCs are best-effort only. |
| static std::vector<VariableLocation> GetVariableLocations( |
| const MethodDebugInfo* method_info, |
| const std::vector<DexRegisterMap>& dex_register_maps, |
| uint16_t vreg, |
| bool is64bitValue, |
| uint64_t compilation_unit_code_address, |
| uint32_t dex_pc_low, |
| uint32_t dex_pc_high, |
| InstructionSet isa) { |
| std::vector<VariableLocation> variable_locations; |
| |
| // Get stack maps sorted by pc (they might not be sorted internally). |
| // TODO(dsrbecky) Remove this once stackmaps get sorted by pc. |
| const CodeInfo code_info(method_info->code_info); |
| std::map<uint32_t, uint32_t> stack_maps; // low_pc -> stack_map_index. |
| for (uint32_t s = 0; s < code_info.GetNumberOfStackMaps(); s++) { |
| StackMap stack_map = code_info.GetStackMapAt(s); |
| DCHECK(stack_map.IsValid()); |
| if (!stack_map.HasDexRegisterMap()) { |
| // The compiler creates stackmaps without register maps at the start of |
| // basic blocks in order to keep instruction-accurate line number mapping. |
| // However, we never stop at those (breakpoint locations always have map). |
| // Therefore, for the purpose of local variables, we ignore them. |
| // The main reason for this is to save space by avoiding undefined gaps. |
| continue; |
| } |
| const uint32_t pc_offset = stack_map.GetNativePcOffset(isa); |
| DCHECK_LE(pc_offset, method_info->code_size); |
| DCHECK_LE(compilation_unit_code_address, method_info->code_address); |
| const uint32_t low_pc = dchecked_integral_cast<uint32_t>( |
| method_info->code_address + pc_offset - compilation_unit_code_address); |
| stack_maps.emplace(low_pc, s); |
| } |
| |
| // Create entries for the requested register based on stack map data. |
| for (auto it = stack_maps.begin(); it != stack_maps.end(); it++) { |
| const uint32_t low_pc = it->first; |
| const uint32_t stack_map_index = it->second; |
| const StackMap stack_map = code_info.GetStackMapAt(stack_map_index); |
| auto next_it = it; |
| next_it++; |
| const uint32_t high_pc = next_it != stack_maps.end() |
| ? next_it->first |
| : method_info->code_address + method_info->code_size - compilation_unit_code_address; |
| DCHECK_LE(low_pc, high_pc); |
| if (low_pc == high_pc) { |
| continue; // Ignore if the address range is empty. |
| } |
| |
| // Check that the stack map is in the requested range. |
| uint32_t dex_pc = stack_map.GetDexPc(); |
| if (!(dex_pc_low <= dex_pc && dex_pc < dex_pc_high)) { |
| // The variable is not in scope at this PC. Therefore omit the entry. |
| // Note that this is different to None() entry which means in scope, but unknown location. |
| continue; |
| } |
| |
| // Find the location of the dex register. |
| DexRegisterLocation reg_lo = DexRegisterLocation::None(); |
| DexRegisterLocation reg_hi = DexRegisterLocation::None(); |
| DCHECK_LT(stack_map_index, dex_register_maps.size()); |
| DexRegisterMap dex_register_map = dex_register_maps[stack_map_index]; |
| DCHECK(!dex_register_map.empty()); |
| CodeItemDataAccessor accessor(*method_info->dex_file, method_info->code_item); |
| reg_lo = dex_register_map[vreg]; |
| if (is64bitValue) { |
| reg_hi = dex_register_map[vreg + 1]; |
| } |
| |
| // Add location entry for this address range. |
| if (!variable_locations.empty() && |
| variable_locations.back().reg_lo == reg_lo && |
| variable_locations.back().reg_hi == reg_hi && |
| variable_locations.back().high_pc == low_pc) { |
| // Merge with the previous entry (extend its range). |
| variable_locations.back().high_pc = high_pc; |
| } else { |
| variable_locations.push_back({low_pc, high_pc, reg_lo, reg_hi}); |
| } |
| } |
| |
| return variable_locations; |
| } |
| |
| // Write table into .debug_loc which describes location of dex register. |
| // The dex register might be valid only at some points and it might |
| // move between machine registers and stack. |
| static void WriteDebugLocEntry(const MethodDebugInfo* method_info, |
| const std::vector<DexRegisterMap>& dex_register_maps, |
| uint16_t vreg, |
| bool is64bitValue, |
| uint64_t compilation_unit_code_address, |
| uint32_t dex_pc_low, |
| uint32_t dex_pc_high, |
| InstructionSet isa, |
| dwarf::DebugInfoEntryWriter<>* debug_info, |
| std::vector<uint8_t>* debug_loc_buffer, |
| std::vector<uint8_t>* debug_ranges_buffer) { |
| using Kind = DexRegisterLocation::Kind; |
| if (method_info->code_info == nullptr || dex_register_maps.empty()) { |
| return; |
| } |
| |
| std::vector<VariableLocation> variable_locations = GetVariableLocations( |
| method_info, |
| dex_register_maps, |
| vreg, |
| is64bitValue, |
| compilation_unit_code_address, |
| dex_pc_low, |
| dex_pc_high, |
| isa); |
| |
| // Write .debug_loc entries. |
| dwarf::Writer<> debug_loc(debug_loc_buffer); |
| const size_t debug_loc_offset = debug_loc.size(); |
| const bool is64bit = Is64BitInstructionSet(isa); |
| std::vector<uint8_t> expr_buffer; |
| for (const VariableLocation& variable_location : variable_locations) { |
| // Translate dex register location to DWARF expression. |
| // Note that 64-bit value might be split to two distinct locations. |
| // (for example, two 32-bit machine registers, or even stack and register) |
| dwarf::Expression expr(&expr_buffer); |
| DexRegisterLocation reg_lo = variable_location.reg_lo; |
| DexRegisterLocation reg_hi = variable_location.reg_hi; |
| for (int piece = 0; piece < (is64bitValue ? 2 : 1); piece++) { |
| DexRegisterLocation reg_loc = (piece == 0 ? reg_lo : reg_hi); |
| const Kind kind = reg_loc.GetKind(); |
| const int32_t value = reg_loc.GetValue(); |
| if (kind == Kind::kInStack) { |
| // The stack offset is relative to SP. Make it relative to CFA. |
| expr.WriteOpFbreg(value - method_info->frame_size_in_bytes); |
| if (piece == 0 && reg_hi.GetKind() == Kind::kInStack && |
| reg_hi.GetValue() == value + 4) { |
| break; // the high word is correctly implied by the low word. |
| } |
| } else if (kind == Kind::kInRegister) { |
| expr.WriteOpReg(GetDwarfCoreReg(isa, value).num()); |
| if (piece == 0 && reg_hi.GetKind() == Kind::kInRegisterHigh && |
| reg_hi.GetValue() == value) { |
| break; // the high word is correctly implied by the low word. |
| } |
| } else if (kind == Kind::kInFpuRegister) { |
| if ((isa == InstructionSet::kArm || isa == InstructionSet::kThumb2) && |
| piece == 0 && reg_hi.GetKind() == Kind::kInFpuRegister && |
| reg_hi.GetValue() == value + 1 && value % 2 == 0) { |
| // Translate S register pair to D register (e.g. S4+S5 to D2). |
| expr.WriteOpReg(Reg::ArmDp(value / 2).num()); |
| break; |
| } |
| expr.WriteOpReg(GetDwarfFpReg(isa, value).num()); |
| if (piece == 0 && reg_hi.GetKind() == Kind::kInFpuRegisterHigh && |
| reg_hi.GetValue() == reg_lo.GetValue()) { |
| break; // the high word is correctly implied by the low word. |
| } |
| } else if (kind == Kind::kConstant) { |
| expr.WriteOpConsts(value); |
| expr.WriteOpStackValue(); |
| } else if (kind == Kind::kNone) { |
| break; |
| } else { |
| // kInStackLargeOffset and kConstantLargeValue are hidden by GetKind(). |
| // kInRegisterHigh and kInFpuRegisterHigh should be handled by |
| // the special cases above and they should not occur alone. |
| LOG(WARNING) << "Unexpected register location: " << kind |
| << " (This can indicate either a bug in the dexer when generating" |
| << " local variable information, or a bug in ART compiler." |
| << " Please file a bug at go/art-bug)"; |
| break; |
| } |
| if (is64bitValue) { |
| // Write the marker which is needed by split 64-bit values. |
| // This code is skipped by the special cases. |
| expr.WriteOpPiece(4); |
| } |
| } |
| |
| if (expr.size() > 0) { |
| if (is64bit) { |
| debug_loc.PushUint64(variable_location.low_pc); |
| debug_loc.PushUint64(variable_location.high_pc); |
| } else { |
| debug_loc.PushUint32(variable_location.low_pc); |
| debug_loc.PushUint32(variable_location.high_pc); |
| } |
| // Write the expression. |
| debug_loc.PushUint16(expr.size()); |
| debug_loc.PushData(expr.data()); |
| } else { |
| // Do not generate .debug_loc if the location is not known. |
| } |
| } |
| // Write end-of-list entry. |
| if (is64bit) { |
| debug_loc.PushUint64(0); |
| debug_loc.PushUint64(0); |
| } else { |
| debug_loc.PushUint32(0); |
| debug_loc.PushUint32(0); |
| } |
| |
| // Write .debug_ranges entries. |
| // This includes ranges where the variable is in scope but the location is not known. |
| dwarf::Writer<> debug_ranges(debug_ranges_buffer); |
| size_t debug_ranges_offset = debug_ranges.size(); |
| for (size_t i = 0; i < variable_locations.size(); i++) { |
| uint32_t low_pc = variable_locations[i].low_pc; |
| uint32_t high_pc = variable_locations[i].high_pc; |
| while (i + 1 < variable_locations.size() && variable_locations[i+1].low_pc == high_pc) { |
| // Merge address range with the next entry. |
| high_pc = variable_locations[++i].high_pc; |
| } |
| if (is64bit) { |
| debug_ranges.PushUint64(low_pc); |
| debug_ranges.PushUint64(high_pc); |
| } else { |
| debug_ranges.PushUint32(low_pc); |
| debug_ranges.PushUint32(high_pc); |
| } |
| } |
| // Write end-of-list entry. |
| if (is64bit) { |
| debug_ranges.PushUint64(0); |
| debug_ranges.PushUint64(0); |
| } else { |
| debug_ranges.PushUint32(0); |
| debug_ranges.PushUint32(0); |
| } |
| |
| // Simple de-duplication - check whether this entry is same as the last one (or tail of it). |
| size_t debug_ranges_entry_size = debug_ranges.size() - debug_ranges_offset; |
| if (debug_ranges_offset >= debug_ranges_entry_size) { |
| size_t previous_offset = debug_ranges_offset - debug_ranges_entry_size; |
| if (memcmp(debug_ranges_buffer->data() + previous_offset, |
| debug_ranges_buffer->data() + debug_ranges_offset, |
| debug_ranges_entry_size) == 0) { |
| // Remove what we have just written and use the last entry instead. |
| debug_ranges_buffer->resize(debug_ranges_offset); |
| debug_ranges_offset = previous_offset; |
| } |
| } |
| |
| // Write attributes to .debug_info. |
| debug_info->WriteSecOffset(dwarf::DW_AT_location, debug_loc_offset); |
| debug_info->WriteSecOffset(dwarf::DW_AT_start_scope, debug_ranges_offset); |
| } |
| |
| } // namespace debug |
| } // namespace art |
| |
| #endif // ART_COMPILER_DEBUG_ELF_DEBUG_LOC_WRITER_H_ |
| |