| /* |
| * Copyright © 2013 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Author: Jani Nikula <jani.nikula@intel.com> |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_edid.h> |
| #include <drm/i915_drm.h> |
| #include <linux/slab.h> |
| #include "i915_drv.h" |
| #include "intel_drv.h" |
| #include "intel_dsi.h" |
| #include "intel_dsi_cmd.h" |
| |
| /* the sub-encoders aka panel drivers */ |
| static const struct intel_dsi_device intel_dsi_devices[] = { |
| }; |
| |
| |
| static void vlv_cck_modify(struct drm_i915_private *dev_priv, u32 reg, u32 val, |
| u32 mask) |
| { |
| u32 tmp = vlv_cck_read(dev_priv, reg); |
| tmp &= ~mask; |
| tmp |= val; |
| vlv_cck_write(dev_priv, reg, tmp); |
| } |
| |
| static void band_gap_wa(struct drm_i915_private *dev_priv) |
| { |
| mutex_lock(&dev_priv->dpio_lock); |
| |
| /* Enable bandgap fix in GOP driver */ |
| vlv_cck_modify(dev_priv, 0x6D, 0x00010000, 0x00030000); |
| msleep(20); |
| vlv_cck_modify(dev_priv, 0x6E, 0x00010000, 0x00030000); |
| msleep(20); |
| vlv_cck_modify(dev_priv, 0x6F, 0x00010000, 0x00030000); |
| msleep(20); |
| vlv_cck_modify(dev_priv, 0x00, 0x00008000, 0x00008000); |
| msleep(20); |
| vlv_cck_modify(dev_priv, 0x00, 0x00000000, 0x00008000); |
| msleep(20); |
| |
| /* Turn Display Trunk on */ |
| vlv_cck_modify(dev_priv, 0x6B, 0x00020000, 0x00030000); |
| msleep(20); |
| |
| vlv_cck_modify(dev_priv, 0x6C, 0x00020000, 0x00030000); |
| msleep(20); |
| |
| vlv_cck_modify(dev_priv, 0x6D, 0x00020000, 0x00030000); |
| msleep(20); |
| vlv_cck_modify(dev_priv, 0x6E, 0x00020000, 0x00030000); |
| msleep(20); |
| vlv_cck_modify(dev_priv, 0x6F, 0x00020000, 0x00030000); |
| |
| mutex_unlock(&dev_priv->dpio_lock); |
| |
| /* Need huge delay, otherwise clock is not stable */ |
| msleep(100); |
| } |
| |
| static struct intel_dsi *intel_attached_dsi(struct drm_connector *connector) |
| { |
| return container_of(intel_attached_encoder(connector), |
| struct intel_dsi, base); |
| } |
| |
| static inline bool is_vid_mode(struct intel_dsi *intel_dsi) |
| { |
| return intel_dsi->dev.type == INTEL_DSI_VIDEO_MODE; |
| } |
| |
| static inline bool is_cmd_mode(struct intel_dsi *intel_dsi) |
| { |
| return intel_dsi->dev.type == INTEL_DSI_COMMAND_MODE; |
| } |
| |
| static void intel_dsi_hot_plug(struct intel_encoder *encoder) |
| { |
| DRM_DEBUG_KMS("\n"); |
| } |
| |
| static bool intel_dsi_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *config) |
| { |
| struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi, |
| base); |
| struct intel_connector *intel_connector = intel_dsi->attached_connector; |
| struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; |
| struct drm_display_mode *adjusted_mode = &config->adjusted_mode; |
| struct drm_display_mode *mode = &config->requested_mode; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| if (fixed_mode) |
| intel_fixed_panel_mode(fixed_mode, adjusted_mode); |
| |
| if (intel_dsi->dev.dev_ops->mode_fixup) |
| return intel_dsi->dev.dev_ops->mode_fixup(&intel_dsi->dev, |
| mode, adjusted_mode); |
| |
| return true; |
| } |
| |
| static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder) |
| { |
| DRM_DEBUG_KMS("\n"); |
| |
| vlv_enable_dsi_pll(encoder); |
| } |
| |
| static void intel_dsi_pre_enable(struct intel_encoder *encoder) |
| { |
| DRM_DEBUG_KMS("\n"); |
| } |
| |
| static void intel_dsi_enable(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); |
| int pipe = intel_crtc->pipe; |
| u32 temp; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| temp = I915_READ(MIPI_DEVICE_READY(pipe)); |
| if ((temp & DEVICE_READY) == 0) { |
| temp &= ~ULPS_STATE_MASK; |
| I915_WRITE(MIPI_DEVICE_READY(pipe), temp | DEVICE_READY); |
| } else if (temp & ULPS_STATE_MASK) { |
| temp &= ~ULPS_STATE_MASK; |
| I915_WRITE(MIPI_DEVICE_READY(pipe), temp | ULPS_STATE_EXIT); |
| /* |
| * We need to ensure that there is a minimum of 1 ms time |
| * available before clearing the UPLS exit state. |
| */ |
| msleep(2); |
| I915_WRITE(MIPI_DEVICE_READY(pipe), temp); |
| } |
| |
| if (is_cmd_mode(intel_dsi)) |
| I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4); |
| |
| if (is_vid_mode(intel_dsi)) { |
| msleep(20); /* XXX */ |
| dpi_send_cmd(intel_dsi, TURN_ON); |
| msleep(100); |
| |
| /* assert ip_tg_enable signal */ |
| temp = I915_READ(MIPI_PORT_CTRL(pipe)); |
| I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE); |
| POSTING_READ(MIPI_PORT_CTRL(pipe)); |
| } |
| |
| intel_dsi->dev.dev_ops->enable(&intel_dsi->dev); |
| } |
| |
| static void intel_dsi_disable(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); |
| int pipe = intel_crtc->pipe; |
| u32 temp; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| intel_dsi->dev.dev_ops->disable(&intel_dsi->dev); |
| |
| if (is_vid_mode(intel_dsi)) { |
| dpi_send_cmd(intel_dsi, SHUTDOWN); |
| msleep(10); |
| |
| /* de-assert ip_tg_enable signal */ |
| temp = I915_READ(MIPI_PORT_CTRL(pipe)); |
| I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE); |
| POSTING_READ(MIPI_PORT_CTRL(pipe)); |
| |
| msleep(2); |
| } |
| |
| temp = I915_READ(MIPI_DEVICE_READY(pipe)); |
| if (temp & DEVICE_READY) { |
| temp &= ~DEVICE_READY; |
| temp &= ~ULPS_STATE_MASK; |
| I915_WRITE(MIPI_DEVICE_READY(pipe), temp); |
| } |
| } |
| |
| static void intel_dsi_post_disable(struct intel_encoder *encoder) |
| { |
| DRM_DEBUG_KMS("\n"); |
| |
| vlv_disable_dsi_pll(encoder); |
| } |
| |
| static bool intel_dsi_get_hw_state(struct intel_encoder *encoder, |
| enum pipe *pipe) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| u32 port, func; |
| enum pipe p; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| /* XXX: this only works for one DSI output */ |
| for (p = PIPE_A; p <= PIPE_B; p++) { |
| port = I915_READ(MIPI_PORT_CTRL(p)); |
| func = I915_READ(MIPI_DSI_FUNC_PRG(p)); |
| |
| if ((port & DPI_ENABLE) || (func & CMD_MODE_DATA_WIDTH_MASK)) { |
| if (I915_READ(MIPI_DEVICE_READY(p)) & DEVICE_READY) { |
| *pipe = p; |
| return true; |
| } |
| } |
| } |
| |
| return false; |
| } |
| |
| static void intel_dsi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config) |
| { |
| DRM_DEBUG_KMS("\n"); |
| |
| /* XXX: read flags, set to adjusted_mode */ |
| } |
| |
| static int intel_dsi_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; |
| struct intel_dsi *intel_dsi = intel_attached_dsi(connector); |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { |
| DRM_DEBUG_KMS("MODE_NO_DBLESCAN\n"); |
| return MODE_NO_DBLESCAN; |
| } |
| |
| if (fixed_mode) { |
| if (mode->hdisplay > fixed_mode->hdisplay) |
| return MODE_PANEL; |
| if (mode->vdisplay > fixed_mode->vdisplay) |
| return MODE_PANEL; |
| } |
| |
| return intel_dsi->dev.dev_ops->mode_valid(&intel_dsi->dev, mode); |
| } |
| |
| /* return txclkesc cycles in terms of divider and duration in us */ |
| static u16 txclkesc(u32 divider, unsigned int us) |
| { |
| switch (divider) { |
| case ESCAPE_CLOCK_DIVIDER_1: |
| default: |
| return 20 * us; |
| case ESCAPE_CLOCK_DIVIDER_2: |
| return 10 * us; |
| case ESCAPE_CLOCK_DIVIDER_4: |
| return 5 * us; |
| } |
| } |
| |
| /* return pixels in terms of txbyteclkhs */ |
| static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count) |
| { |
| return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp, 8), lane_count); |
| } |
| |
| static void set_dsi_timings(struct drm_encoder *encoder, |
| const struct drm_display_mode *mode) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); |
| int pipe = intel_crtc->pipe; |
| unsigned int bpp = intel_crtc->config.pipe_bpp; |
| unsigned int lane_count = intel_dsi->lane_count; |
| |
| u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp; |
| |
| hactive = mode->hdisplay; |
| hfp = mode->hsync_start - mode->hdisplay; |
| hsync = mode->hsync_end - mode->hsync_start; |
| hbp = mode->htotal - mode->hsync_end; |
| |
| vfp = mode->vsync_start - mode->vdisplay; |
| vsync = mode->vsync_end - mode->vsync_start; |
| vbp = mode->vtotal - mode->vsync_end; |
| |
| /* horizontal values are in terms of high speed byte clock */ |
| hactive = txbyteclkhs(hactive, bpp, lane_count); |
| hfp = txbyteclkhs(hfp, bpp, lane_count); |
| hsync = txbyteclkhs(hsync, bpp, lane_count); |
| hbp = txbyteclkhs(hbp, bpp, lane_count); |
| |
| I915_WRITE(MIPI_HACTIVE_AREA_COUNT(pipe), hactive); |
| I915_WRITE(MIPI_HFP_COUNT(pipe), hfp); |
| |
| /* meaningful for video mode non-burst sync pulse mode only, can be zero |
| * for non-burst sync events and burst modes */ |
| I915_WRITE(MIPI_HSYNC_PADDING_COUNT(pipe), hsync); |
| I915_WRITE(MIPI_HBP_COUNT(pipe), hbp); |
| |
| /* vertical values are in terms of lines */ |
| I915_WRITE(MIPI_VFP_COUNT(pipe), vfp); |
| I915_WRITE(MIPI_VSYNC_PADDING_COUNT(pipe), vsync); |
| I915_WRITE(MIPI_VBP_COUNT(pipe), vbp); |
| } |
| |
| static void intel_dsi_mode_set(struct intel_encoder *intel_encoder) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_device *dev = encoder->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); |
| struct drm_display_mode *adjusted_mode = |
| &intel_crtc->config.adjusted_mode; |
| int pipe = intel_crtc->pipe; |
| unsigned int bpp = intel_crtc->config.pipe_bpp; |
| u32 val, tmp; |
| |
| DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe)); |
| |
| /* Update the DSI PLL */ |
| vlv_enable_dsi_pll(intel_encoder); |
| |
| /* XXX: Location of the call */ |
| band_gap_wa(dev_priv); |
| |
| /* escape clock divider, 20MHz, shared for A and C. device ready must be |
| * off when doing this! txclkesc? */ |
| tmp = I915_READ(MIPI_CTRL(0)); |
| tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK; |
| I915_WRITE(MIPI_CTRL(0), tmp | ESCAPE_CLOCK_DIVIDER_1); |
| |
| /* read request priority is per pipe */ |
| tmp = I915_READ(MIPI_CTRL(pipe)); |
| tmp &= ~READ_REQUEST_PRIORITY_MASK; |
| I915_WRITE(MIPI_CTRL(pipe), tmp | READ_REQUEST_PRIORITY_HIGH); |
| |
| /* XXX: why here, why like this? handling in irq handler?! */ |
| I915_WRITE(MIPI_INTR_STAT(pipe), 0xffffffff); |
| I915_WRITE(MIPI_INTR_EN(pipe), 0xffffffff); |
| |
| I915_WRITE(MIPI_DPHY_PARAM(pipe), |
| 0x3c << EXIT_ZERO_COUNT_SHIFT | |
| 0x1f << TRAIL_COUNT_SHIFT | |
| 0xc5 << CLK_ZERO_COUNT_SHIFT | |
| 0x1f << PREPARE_COUNT_SHIFT); |
| |
| I915_WRITE(MIPI_DPI_RESOLUTION(pipe), |
| adjusted_mode->vdisplay << VERTICAL_ADDRESS_SHIFT | |
| adjusted_mode->hdisplay << HORIZONTAL_ADDRESS_SHIFT); |
| |
| set_dsi_timings(encoder, adjusted_mode); |
| |
| val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT; |
| if (is_cmd_mode(intel_dsi)) { |
| val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT; |
| val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */ |
| } else { |
| val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT; |
| |
| /* XXX: cross-check bpp vs. pixel format? */ |
| val |= intel_dsi->pixel_format; |
| } |
| I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), val); |
| |
| /* timeouts for recovery. one frame IIUC. if counter expires, EOT and |
| * stop state. */ |
| |
| /* |
| * In burst mode, value greater than one DPI line Time in byte clock |
| * (txbyteclkhs) To timeout this timer 1+ of the above said value is |
| * recommended. |
| * |
| * In non-burst mode, Value greater than one DPI frame time in byte |
| * clock(txbyteclkhs) To timeout this timer 1+ of the above said value |
| * is recommended. |
| * |
| * In DBI only mode, value greater than one DBI frame time in byte |
| * clock(txbyteclkhs) To timeout this timer 1+ of the above said value |
| * is recommended. |
| */ |
| |
| if (is_vid_mode(intel_dsi) && |
| intel_dsi->video_mode_format == VIDEO_MODE_BURST) { |
| I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe), |
| txbyteclkhs(adjusted_mode->htotal, bpp, |
| intel_dsi->lane_count) + 1); |
| } else { |
| I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe), |
| txbyteclkhs(adjusted_mode->vtotal * |
| adjusted_mode->htotal, |
| bpp, intel_dsi->lane_count) + 1); |
| } |
| I915_WRITE(MIPI_LP_RX_TIMEOUT(pipe), 8309); /* max */ |
| I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(pipe), 0x14); /* max */ |
| I915_WRITE(MIPI_DEVICE_RESET_TIMER(pipe), 0xffff); /* max */ |
| |
| /* dphy stuff */ |
| |
| /* in terms of low power clock */ |
| I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(ESCAPE_CLOCK_DIVIDER_1, 100)); |
| |
| /* recovery disables */ |
| I915_WRITE(MIPI_EOT_DISABLE(pipe), intel_dsi->eot_disable); |
| |
| /* in terms of txbyteclkhs. actual high to low switch + |
| * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK. |
| * |
| * XXX: write MIPI_STOP_STATE_STALL? |
| */ |
| I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(pipe), 0x46); |
| |
| /* XXX: low power clock equivalence in terms of byte clock. the number |
| * of byte clocks occupied in one low power clock. based on txbyteclkhs |
| * and txclkesc. txclkesc time / txbyteclk time * (105 + |
| * MIPI_STOP_STATE_STALL) / 105.??? |
| */ |
| I915_WRITE(MIPI_LP_BYTECLK(pipe), 4); |
| |
| /* the bw essential for transmitting 16 long packets containing 252 |
| * bytes meant for dcs write memory command is programmed in this |
| * register in terms of byte clocks. based on dsi transfer rate and the |
| * number of lanes configured the time taken to transmit 16 long packets |
| * in a dsi stream varies. */ |
| I915_WRITE(MIPI_DBI_BW_CTRL(pipe), 0x820); |
| |
| I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(pipe), |
| 0xa << LP_HS_SSW_CNT_SHIFT | |
| 0x14 << HS_LP_PWR_SW_CNT_SHIFT); |
| |
| if (is_vid_mode(intel_dsi)) |
| I915_WRITE(MIPI_VIDEO_MODE_FORMAT(pipe), |
| intel_dsi->video_mode_format); |
| } |
| |
| static enum drm_connector_status |
| intel_dsi_detect(struct drm_connector *connector, bool force) |
| { |
| struct intel_dsi *intel_dsi = intel_attached_dsi(connector); |
| DRM_DEBUG_KMS("\n"); |
| return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev); |
| } |
| |
| static int intel_dsi_get_modes(struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct drm_display_mode *mode; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| if (!intel_connector->panel.fixed_mode) { |
| DRM_DEBUG_KMS("no fixed mode\n"); |
| return 0; |
| } |
| |
| mode = drm_mode_duplicate(connector->dev, |
| intel_connector->panel.fixed_mode); |
| if (!mode) { |
| DRM_DEBUG_KMS("drm_mode_duplicate failed\n"); |
| return 0; |
| } |
| |
| drm_mode_probed_add(connector, mode); |
| return 1; |
| } |
| |
| static void intel_dsi_destroy(struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| |
| DRM_DEBUG_KMS("\n"); |
| intel_panel_fini(&intel_connector->panel); |
| drm_connector_cleanup(connector); |
| kfree(connector); |
| } |
| |
| static const struct drm_encoder_funcs intel_dsi_funcs = { |
| .destroy = intel_encoder_destroy, |
| }; |
| |
| static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = { |
| .get_modes = intel_dsi_get_modes, |
| .mode_valid = intel_dsi_mode_valid, |
| .best_encoder = intel_best_encoder, |
| }; |
| |
| static const struct drm_connector_funcs intel_dsi_connector_funcs = { |
| .dpms = intel_connector_dpms, |
| .detect = intel_dsi_detect, |
| .destroy = intel_dsi_destroy, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| }; |
| |
| bool intel_dsi_init(struct drm_device *dev) |
| { |
| struct intel_dsi *intel_dsi; |
| struct intel_encoder *intel_encoder; |
| struct drm_encoder *encoder; |
| struct intel_connector *intel_connector; |
| struct drm_connector *connector; |
| struct drm_display_mode *fixed_mode = NULL; |
| const struct intel_dsi_device *dsi; |
| unsigned int i; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL); |
| if (!intel_dsi) |
| return false; |
| |
| intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL); |
| if (!intel_connector) { |
| kfree(intel_dsi); |
| return false; |
| } |
| |
| intel_encoder = &intel_dsi->base; |
| encoder = &intel_encoder->base; |
| intel_dsi->attached_connector = intel_connector; |
| |
| connector = &intel_connector->base; |
| |
| drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI); |
| |
| /* XXX: very likely not all of these are needed */ |
| intel_encoder->hot_plug = intel_dsi_hot_plug; |
| intel_encoder->compute_config = intel_dsi_compute_config; |
| intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable; |
| intel_encoder->pre_enable = intel_dsi_pre_enable; |
| intel_encoder->enable = intel_dsi_enable; |
| intel_encoder->mode_set = intel_dsi_mode_set; |
| intel_encoder->disable = intel_dsi_disable; |
| intel_encoder->post_disable = intel_dsi_post_disable; |
| intel_encoder->get_hw_state = intel_dsi_get_hw_state; |
| intel_encoder->get_config = intel_dsi_get_config; |
| |
| intel_connector->get_hw_state = intel_connector_get_hw_state; |
| |
| for (i = 0; i < ARRAY_SIZE(intel_dsi_devices); i++) { |
| dsi = &intel_dsi_devices[i]; |
| intel_dsi->dev = *dsi; |
| |
| if (dsi->dev_ops->init(&intel_dsi->dev)) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(intel_dsi_devices)) { |
| DRM_DEBUG_KMS("no device found\n"); |
| goto err; |
| } |
| |
| intel_encoder->type = INTEL_OUTPUT_DSI; |
| intel_encoder->crtc_mask = (1 << 0); /* XXX */ |
| |
| intel_encoder->cloneable = false; |
| drm_connector_init(dev, connector, &intel_dsi_connector_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| |
| drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs); |
| |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/ |
| connector->interlace_allowed = false; |
| connector->doublescan_allowed = false; |
| |
| intel_connector_attach_encoder(intel_connector, intel_encoder); |
| |
| drm_sysfs_connector_add(connector); |
| |
| fixed_mode = dsi->dev_ops->get_modes(&intel_dsi->dev); |
| if (!fixed_mode) { |
| DRM_DEBUG_KMS("no fixed mode\n"); |
| goto err; |
| } |
| |
| fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; |
| intel_panel_init(&intel_connector->panel, fixed_mode); |
| |
| return true; |
| |
| err: |
| drm_encoder_cleanup(&intel_encoder->base); |
| kfree(intel_dsi); |
| kfree(intel_connector); |
| |
| return false; |
| } |