| /* |
| * Apple Cinema Display driver |
| * |
| * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch) |
| * |
| * Thanks to Caskey L. Dickson for his work with acdctl. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/backlight.h> |
| #include <linux/timer.h> |
| #include <linux/workqueue.h> |
| #include <linux/atomic.h> |
| |
| #define APPLE_VENDOR_ID 0x05AC |
| |
| #define USB_REQ_GET_REPORT 0x01 |
| #define USB_REQ_SET_REPORT 0x09 |
| |
| #define ACD_USB_TIMEOUT 250 |
| |
| #define ACD_USB_EDID 0x0302 |
| #define ACD_USB_BRIGHTNESS 0x0310 |
| |
| #define ACD_BTN_NONE 0 |
| #define ACD_BTN_BRIGHT_UP 3 |
| #define ACD_BTN_BRIGHT_DOWN 4 |
| |
| #define ACD_URB_BUFFER_LEN 2 |
| #define ACD_MSG_BUFFER_LEN 2 |
| |
| #define APPLEDISPLAY_DEVICE(prod) \ |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ |
| USB_DEVICE_ID_MATCH_INT_CLASS | \ |
| USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ |
| .idVendor = APPLE_VENDOR_ID, \ |
| .idProduct = (prod), \ |
| .bInterfaceClass = USB_CLASS_HID, \ |
| .bInterfaceProtocol = 0x00 |
| |
| /* table of devices that work with this driver */ |
| static const struct usb_device_id appledisplay_table[] = { |
| { APPLEDISPLAY_DEVICE(0x9218) }, |
| { APPLEDISPLAY_DEVICE(0x9219) }, |
| { APPLEDISPLAY_DEVICE(0x921c) }, |
| { APPLEDISPLAY_DEVICE(0x921d) }, |
| { APPLEDISPLAY_DEVICE(0x9222) }, |
| { APPLEDISPLAY_DEVICE(0x9226) }, |
| { APPLEDISPLAY_DEVICE(0x9236) }, |
| |
| /* Terminating entry */ |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, appledisplay_table); |
| |
| /* Structure to hold all of our device specific stuff */ |
| struct appledisplay { |
| struct usb_device *udev; /* usb device */ |
| struct urb *urb; /* usb request block */ |
| struct backlight_device *bd; /* backlight device */ |
| u8 *urbdata; /* interrupt URB data buffer */ |
| u8 *msgdata; /* control message data buffer */ |
| |
| struct delayed_work work; |
| int button_pressed; |
| spinlock_t lock; |
| struct mutex sysfslock; /* concurrent read and write */ |
| }; |
| |
| static atomic_t count_displays = ATOMIC_INIT(0); |
| static struct workqueue_struct *wq; |
| |
| static void appledisplay_complete(struct urb *urb) |
| { |
| struct appledisplay *pdata = urb->context; |
| struct device *dev = &pdata->udev->dev; |
| unsigned long flags; |
| int status = urb->status; |
| int retval; |
| |
| switch (status) { |
| case 0: |
| /* success */ |
| break; |
| case -EOVERFLOW: |
| dev_err(dev, |
| "OVERFLOW with data length %d, actual length is %d\n", |
| ACD_URB_BUFFER_LEN, pdata->urb->actual_length); |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* This urb is terminated, clean up */ |
| dev_dbg(dev, "%s - urb shuttingdown with status: %d\n", |
| __func__, status); |
| return; |
| default: |
| dev_dbg(dev, "%s - nonzero urb status received: %d\n", |
| __func__, status); |
| goto exit; |
| } |
| |
| spin_lock_irqsave(&pdata->lock, flags); |
| |
| switch(pdata->urbdata[1]) { |
| case ACD_BTN_BRIGHT_UP: |
| case ACD_BTN_BRIGHT_DOWN: |
| pdata->button_pressed = 1; |
| queue_delayed_work(wq, &pdata->work, 0); |
| break; |
| case ACD_BTN_NONE: |
| default: |
| pdata->button_pressed = 0; |
| break; |
| } |
| |
| spin_unlock_irqrestore(&pdata->lock, flags); |
| |
| exit: |
| retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); |
| if (retval) { |
| dev_err(dev, "%s - usb_submit_urb failed with result %d\n", |
| __func__, retval); |
| } |
| } |
| |
| static int appledisplay_bl_update_status(struct backlight_device *bd) |
| { |
| struct appledisplay *pdata = bl_get_data(bd); |
| int retval; |
| |
| mutex_lock(&pdata->sysfslock); |
| pdata->msgdata[0] = 0x10; |
| pdata->msgdata[1] = bd->props.brightness; |
| |
| retval = usb_control_msg( |
| pdata->udev, |
| usb_sndctrlpipe(pdata->udev, 0), |
| USB_REQ_SET_REPORT, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| ACD_USB_BRIGHTNESS, |
| 0, |
| pdata->msgdata, 2, |
| ACD_USB_TIMEOUT); |
| mutex_unlock(&pdata->sysfslock); |
| |
| return retval; |
| } |
| |
| static int appledisplay_bl_get_brightness(struct backlight_device *bd) |
| { |
| struct appledisplay *pdata = bl_get_data(bd); |
| int retval, brightness; |
| |
| mutex_lock(&pdata->sysfslock); |
| retval = usb_control_msg( |
| pdata->udev, |
| usb_rcvctrlpipe(pdata->udev, 0), |
| USB_REQ_GET_REPORT, |
| USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| ACD_USB_BRIGHTNESS, |
| 0, |
| pdata->msgdata, 2, |
| ACD_USB_TIMEOUT); |
| brightness = pdata->msgdata[1]; |
| mutex_unlock(&pdata->sysfslock); |
| |
| if (retval < 0) |
| return retval; |
| else |
| return brightness; |
| } |
| |
| static const struct backlight_ops appledisplay_bl_data = { |
| .get_brightness = appledisplay_bl_get_brightness, |
| .update_status = appledisplay_bl_update_status, |
| }; |
| |
| static void appledisplay_work(struct work_struct *work) |
| { |
| struct appledisplay *pdata = |
| container_of(work, struct appledisplay, work.work); |
| int retval; |
| |
| retval = appledisplay_bl_get_brightness(pdata->bd); |
| if (retval >= 0) |
| pdata->bd->props.brightness = retval; |
| |
| /* Poll again in about 125ms if there's still a button pressed */ |
| if (pdata->button_pressed) |
| schedule_delayed_work(&pdata->work, HZ / 8); |
| } |
| |
| static int appledisplay_probe(struct usb_interface *iface, |
| const struct usb_device_id *id) |
| { |
| struct backlight_properties props; |
| struct appledisplay *pdata; |
| struct usb_device *udev = interface_to_usbdev(iface); |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int int_in_endpointAddr = 0; |
| int i, retval = -ENOMEM, brightness; |
| char bl_name[20]; |
| |
| /* set up the endpoint information */ |
| /* use only the first interrupt-in endpoint */ |
| iface_desc = iface->cur_altsetting; |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) { |
| /* we found an interrupt in endpoint */ |
| int_in_endpointAddr = endpoint->bEndpointAddress; |
| break; |
| } |
| } |
| if (!int_in_endpointAddr) { |
| dev_err(&iface->dev, "Could not find int-in endpoint\n"); |
| return -EIO; |
| } |
| |
| /* allocate memory for our device state and initialize it */ |
| pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL); |
| if (!pdata) { |
| retval = -ENOMEM; |
| dev_err(&iface->dev, "Out of memory\n"); |
| goto error; |
| } |
| |
| pdata->udev = udev; |
| |
| spin_lock_init(&pdata->lock); |
| INIT_DELAYED_WORK(&pdata->work, appledisplay_work); |
| mutex_init(&pdata->sysfslock); |
| |
| /* Allocate buffer for control messages */ |
| pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL); |
| if (!pdata->msgdata) { |
| retval = -ENOMEM; |
| dev_err(&iface->dev, |
| "Allocating buffer for control messages failed\n"); |
| goto error; |
| } |
| |
| /* Allocate interrupt URB */ |
| pdata->urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!pdata->urb) { |
| retval = -ENOMEM; |
| dev_err(&iface->dev, "Allocating URB failed\n"); |
| goto error; |
| } |
| |
| /* Allocate buffer for interrupt data */ |
| pdata->urbdata = usb_alloc_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| GFP_KERNEL, &pdata->urb->transfer_dma); |
| if (!pdata->urbdata) { |
| retval = -ENOMEM; |
| dev_err(&iface->dev, "Allocating URB buffer failed\n"); |
| goto error; |
| } |
| |
| /* Configure interrupt URB */ |
| usb_fill_int_urb(pdata->urb, udev, |
| usb_rcvintpipe(udev, int_in_endpointAddr), |
| pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete, |
| pdata, 1); |
| if (usb_submit_urb(pdata->urb, GFP_KERNEL)) { |
| retval = -EIO; |
| dev_err(&iface->dev, "Submitting URB failed\n"); |
| goto error; |
| } |
| |
| /* Register backlight device */ |
| snprintf(bl_name, sizeof(bl_name), "appledisplay%d", |
| atomic_inc_return(&count_displays) - 1); |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = 0xff; |
| pdata->bd = backlight_device_register(bl_name, NULL, pdata, |
| &appledisplay_bl_data, &props); |
| if (IS_ERR(pdata->bd)) { |
| dev_err(&iface->dev, "Backlight registration failed\n"); |
| retval = PTR_ERR(pdata->bd); |
| goto error; |
| } |
| |
| /* Try to get brightness */ |
| brightness = appledisplay_bl_get_brightness(pdata->bd); |
| |
| if (brightness < 0) { |
| retval = brightness; |
| dev_err(&iface->dev, |
| "Error while getting initial brightness: %d\n", retval); |
| goto error; |
| } |
| |
| /* Set brightness in backlight device */ |
| pdata->bd->props.brightness = brightness; |
| |
| /* save our data pointer in the interface device */ |
| usb_set_intfdata(iface, pdata); |
| |
| printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n"); |
| |
| return 0; |
| |
| error: |
| if (pdata) { |
| if (pdata->urb) { |
| usb_kill_urb(pdata->urb); |
| if (pdata->urbdata) |
| usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| pdata->urbdata, pdata->urb->transfer_dma); |
| usb_free_urb(pdata->urb); |
| } |
| if (!IS_ERR(pdata->bd)) |
| backlight_device_unregister(pdata->bd); |
| kfree(pdata->msgdata); |
| } |
| usb_set_intfdata(iface, NULL); |
| kfree(pdata); |
| return retval; |
| } |
| |
| static void appledisplay_disconnect(struct usb_interface *iface) |
| { |
| struct appledisplay *pdata = usb_get_intfdata(iface); |
| |
| if (pdata) { |
| usb_kill_urb(pdata->urb); |
| cancel_delayed_work(&pdata->work); |
| backlight_device_unregister(pdata->bd); |
| usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| pdata->urbdata, pdata->urb->transfer_dma); |
| usb_free_urb(pdata->urb); |
| kfree(pdata->msgdata); |
| kfree(pdata); |
| } |
| |
| printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n"); |
| } |
| |
| static struct usb_driver appledisplay_driver = { |
| .name = "appledisplay", |
| .probe = appledisplay_probe, |
| .disconnect = appledisplay_disconnect, |
| .id_table = appledisplay_table, |
| }; |
| |
| static int __init appledisplay_init(void) |
| { |
| wq = create_singlethread_workqueue("appledisplay"); |
| if (!wq) { |
| printk(KERN_ERR "appledisplay: Could not create work queue\n"); |
| return -ENOMEM; |
| } |
| |
| return usb_register(&appledisplay_driver); |
| } |
| |
| static void __exit appledisplay_exit(void) |
| { |
| flush_workqueue(wq); |
| destroy_workqueue(wq); |
| usb_deregister(&appledisplay_driver); |
| } |
| |
| MODULE_AUTHOR("Michael Hanselmann"); |
| MODULE_DESCRIPTION("Apple Cinema Display driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(appledisplay_init); |
| module_exit(appledisplay_exit); |