| /* |
| * MFD driver for TWL6040 audio device |
| * |
| * Authors: Misael Lopez Cruz <misael.lopez@ti.com> |
| * Jorge Eduardo Candelaria <jorge.candelaria@ti.com> |
| * Peter Ujfalusi <peter.ujfalusi@ti.com> |
| * |
| * Copyright: (C) 2011 Texas Instruments, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_gpio.h> |
| #include <linux/of_platform.h> |
| #include <linux/gpio.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/twl6040.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1) |
| #define TWL6040_NUM_SUPPLIES (2) |
| |
| static const struct reg_default twl6040_defaults[] = { |
| { 0x01, 0x4B }, /* REG_ASICID (ro) */ |
| { 0x02, 0x00 }, /* REG_ASICREV (ro) */ |
| { 0x03, 0x00 }, /* REG_INTID */ |
| { 0x04, 0x00 }, /* REG_INTMR */ |
| { 0x05, 0x00 }, /* REG_NCPCTRL */ |
| { 0x06, 0x00 }, /* REG_LDOCTL */ |
| { 0x07, 0x60 }, /* REG_HPPLLCTL */ |
| { 0x08, 0x00 }, /* REG_LPPLLCTL */ |
| { 0x09, 0x4A }, /* REG_LPPLLDIV */ |
| { 0x0A, 0x00 }, /* REG_AMICBCTL */ |
| { 0x0B, 0x00 }, /* REG_DMICBCTL */ |
| { 0x0C, 0x00 }, /* REG_MICLCTL */ |
| { 0x0D, 0x00 }, /* REG_MICRCTL */ |
| { 0x0E, 0x00 }, /* REG_MICGAIN */ |
| { 0x0F, 0x1B }, /* REG_LINEGAIN */ |
| { 0x10, 0x00 }, /* REG_HSLCTL */ |
| { 0x11, 0x00 }, /* REG_HSRCTL */ |
| { 0x12, 0x00 }, /* REG_HSGAIN */ |
| { 0x13, 0x00 }, /* REG_EARCTL */ |
| { 0x14, 0x00 }, /* REG_HFLCTL */ |
| { 0x15, 0x00 }, /* REG_HFLGAIN */ |
| { 0x16, 0x00 }, /* REG_HFRCTL */ |
| { 0x17, 0x00 }, /* REG_HFRGAIN */ |
| { 0x18, 0x00 }, /* REG_VIBCTLL */ |
| { 0x19, 0x00 }, /* REG_VIBDATL */ |
| { 0x1A, 0x00 }, /* REG_VIBCTLR */ |
| { 0x1B, 0x00 }, /* REG_VIBDATR */ |
| { 0x1C, 0x00 }, /* REG_HKCTL1 */ |
| { 0x1D, 0x00 }, /* REG_HKCTL2 */ |
| { 0x1E, 0x00 }, /* REG_GPOCTL */ |
| { 0x1F, 0x00 }, /* REG_ALB */ |
| { 0x20, 0x00 }, /* REG_DLB */ |
| /* 0x28, REG_TRIM1 */ |
| /* 0x29, REG_TRIM2 */ |
| /* 0x2A, REG_TRIM3 */ |
| /* 0x2B, REG_HSOTRIM */ |
| /* 0x2C, REG_HFOTRIM */ |
| { 0x2D, 0x08 }, /* REG_ACCCTL */ |
| { 0x2E, 0x00 }, /* REG_STATUS (ro) */ |
| }; |
| |
| static struct reg_sequence twl6040_patch[] = { |
| /* |
| * Select I2C bus access to dual access registers |
| * Interrupt register is cleared on read |
| * Select fast mode for i2c (400KHz) |
| */ |
| { TWL6040_REG_ACCCTL, |
| TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) }, |
| }; |
| |
| |
| static bool twl6040_has_vibra(struct device_node *parent) |
| { |
| struct device_node *node; |
| |
| node = of_get_child_by_name(parent, "vibra"); |
| if (node) { |
| of_node_put(node); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) |
| { |
| int ret; |
| unsigned int val; |
| |
| ret = regmap_read(twl6040->regmap, reg, &val); |
| if (ret < 0) |
| return ret; |
| |
| return val; |
| } |
| EXPORT_SYMBOL(twl6040_reg_read); |
| |
| int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val) |
| { |
| int ret; |
| |
| ret = regmap_write(twl6040->regmap, reg, val); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6040_reg_write); |
| |
| int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) |
| { |
| return regmap_update_bits(twl6040->regmap, reg, mask, mask); |
| } |
| EXPORT_SYMBOL(twl6040_set_bits); |
| |
| int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) |
| { |
| return regmap_update_bits(twl6040->regmap, reg, mask, 0); |
| } |
| EXPORT_SYMBOL(twl6040_clear_bits); |
| |
| /* twl6040 codec manual power-up sequence */ |
| static int twl6040_power_up_manual(struct twl6040 *twl6040) |
| { |
| u8 ldoctl, ncpctl, lppllctl; |
| int ret; |
| |
| /* enable high-side LDO, reference system and internal oscillator */ |
| ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| if (ret) |
| return ret; |
| usleep_range(10000, 10500); |
| |
| /* enable negative charge pump */ |
| ncpctl = TWL6040_NCPENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); |
| if (ret) |
| goto ncp_err; |
| usleep_range(1000, 1500); |
| |
| /* enable low-side LDO */ |
| ldoctl |= TWL6040_LSLDOENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| if (ret) |
| goto lsldo_err; |
| usleep_range(1000, 1500); |
| |
| /* enable low-power PLL */ |
| lppllctl = TWL6040_LPLLENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| if (ret) |
| goto lppll_err; |
| usleep_range(5000, 5500); |
| |
| /* disable internal oscillator */ |
| ldoctl &= ~TWL6040_OSCENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| if (ret) |
| goto osc_err; |
| |
| return 0; |
| |
| osc_err: |
| lppllctl &= ~TWL6040_LPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| lppll_err: |
| ldoctl &= ~TWL6040_LSLDOENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| lsldo_err: |
| ncpctl &= ~TWL6040_NCPENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); |
| ncp_err: |
| ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA); |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| |
| dev_err(twl6040->dev, "manual power-up failed\n"); |
| return ret; |
| } |
| |
| /* twl6040 manual power-down sequence */ |
| static void twl6040_power_down_manual(struct twl6040 *twl6040) |
| { |
| u8 ncpctl, ldoctl, lppllctl; |
| |
| ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL); |
| ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL); |
| lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); |
| |
| /* enable internal oscillator */ |
| ldoctl |= TWL6040_OSCENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| usleep_range(1000, 1500); |
| |
| /* disable low-power PLL */ |
| lppllctl &= ~TWL6040_LPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| |
| /* disable low-side LDO */ |
| ldoctl &= ~TWL6040_LSLDOENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| |
| /* disable negative charge pump */ |
| ncpctl &= ~TWL6040_NCPENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); |
| |
| /* disable high-side LDO, reference system and internal oscillator */ |
| ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA); |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| } |
| |
| static irqreturn_t twl6040_readyint_handler(int irq, void *data) |
| { |
| struct twl6040 *twl6040 = data; |
| |
| complete(&twl6040->ready); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t twl6040_thint_handler(int irq, void *data) |
| { |
| struct twl6040 *twl6040 = data; |
| u8 status; |
| |
| status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS); |
| if (status & TWL6040_TSHUTDET) { |
| dev_warn(twl6040->dev, "Thermal shutdown, powering-off"); |
| twl6040_power(twl6040, 0); |
| } else { |
| dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on"); |
| twl6040_power(twl6040, 1); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int twl6040_power_up_automatic(struct twl6040 *twl6040) |
| { |
| int time_left; |
| |
| gpio_set_value(twl6040->audpwron, 1); |
| |
| time_left = wait_for_completion_timeout(&twl6040->ready, |
| msecs_to_jiffies(144)); |
| if (!time_left) { |
| u8 intid; |
| |
| dev_warn(twl6040->dev, "timeout waiting for READYINT\n"); |
| intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID); |
| if (!(intid & TWL6040_READYINT)) { |
| dev_err(twl6040->dev, "automatic power-up failed\n"); |
| gpio_set_value(twl6040->audpwron, 0); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int twl6040_power(struct twl6040 *twl6040, int on) |
| { |
| int ret = 0; |
| |
| mutex_lock(&twl6040->mutex); |
| |
| if (on) { |
| /* already powered-up */ |
| if (twl6040->power_count++) |
| goto out; |
| |
| clk_prepare_enable(twl6040->clk32k); |
| |
| /* Allow writes to the chip */ |
| regcache_cache_only(twl6040->regmap, false); |
| |
| if (gpio_is_valid(twl6040->audpwron)) { |
| /* use automatic power-up sequence */ |
| ret = twl6040_power_up_automatic(twl6040); |
| if (ret) { |
| twl6040->power_count = 0; |
| goto out; |
| } |
| } else { |
| /* use manual power-up sequence */ |
| ret = twl6040_power_up_manual(twl6040); |
| if (ret) { |
| twl6040->power_count = 0; |
| goto out; |
| } |
| } |
| |
| /* Sync with the HW */ |
| regcache_sync(twl6040->regmap); |
| |
| /* Default PLL configuration after power up */ |
| twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL; |
| twl6040->sysclk = 19200000; |
| twl6040->mclk = 32768; |
| } else { |
| /* already powered-down */ |
| if (!twl6040->power_count) { |
| dev_err(twl6040->dev, |
| "device is already powered-off\n"); |
| ret = -EPERM; |
| goto out; |
| } |
| |
| if (--twl6040->power_count) |
| goto out; |
| |
| if (gpio_is_valid(twl6040->audpwron)) { |
| /* use AUDPWRON line */ |
| gpio_set_value(twl6040->audpwron, 0); |
| |
| /* power-down sequence latency */ |
| usleep_range(500, 700); |
| } else { |
| /* use manual power-down sequence */ |
| twl6040_power_down_manual(twl6040); |
| } |
| |
| /* Set regmap to cache only and mark it as dirty */ |
| regcache_cache_only(twl6040->regmap, true); |
| regcache_mark_dirty(twl6040->regmap); |
| |
| twl6040->sysclk = 0; |
| twl6040->mclk = 0; |
| |
| clk_disable_unprepare(twl6040->clk32k); |
| } |
| |
| out: |
| mutex_unlock(&twl6040->mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6040_power); |
| |
| int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, |
| unsigned int freq_in, unsigned int freq_out) |
| { |
| u8 hppllctl, lppllctl; |
| int ret = 0; |
| |
| mutex_lock(&twl6040->mutex); |
| |
| hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL); |
| lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); |
| |
| /* Force full reconfiguration when switching between PLL */ |
| if (pll_id != twl6040->pll) { |
| twl6040->sysclk = 0; |
| twl6040->mclk = 0; |
| } |
| |
| switch (pll_id) { |
| case TWL6040_SYSCLK_SEL_LPPLL: |
| /* low-power PLL divider */ |
| /* Change the sysclk configuration only if it has been canged */ |
| if (twl6040->sysclk != freq_out) { |
| switch (freq_out) { |
| case 17640000: |
| lppllctl |= TWL6040_LPLLFIN; |
| break; |
| case 19200000: |
| lppllctl &= ~TWL6040_LPLLFIN; |
| break; |
| default: |
| dev_err(twl6040->dev, |
| "freq_out %d not supported\n", |
| freq_out); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, |
| lppllctl); |
| } |
| |
| /* The PLL in use has not been change, we can exit */ |
| if (twl6040->pll == pll_id) |
| break; |
| |
| switch (freq_in) { |
| case 32768: |
| lppllctl |= TWL6040_LPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, |
| lppllctl); |
| mdelay(5); |
| lppllctl &= ~TWL6040_HPLLSEL; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, |
| lppllctl); |
| hppllctl &= ~TWL6040_HPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, |
| hppllctl); |
| break; |
| default: |
| dev_err(twl6040->dev, |
| "freq_in %d not supported\n", freq_in); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| break; |
| case TWL6040_SYSCLK_SEL_HPPLL: |
| /* high-performance PLL can provide only 19.2 MHz */ |
| if (freq_out != 19200000) { |
| dev_err(twl6040->dev, |
| "freq_out %d not supported\n", freq_out); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| |
| if (twl6040->mclk != freq_in) { |
| hppllctl &= ~TWL6040_MCLK_MSK; |
| |
| switch (freq_in) { |
| case 12000000: |
| /* PLL enabled, active mode */ |
| hppllctl |= TWL6040_MCLK_12000KHZ | |
| TWL6040_HPLLENA; |
| break; |
| case 19200000: |
| /* PLL enabled, bypass mode */ |
| hppllctl |= TWL6040_MCLK_19200KHZ | |
| TWL6040_HPLLBP | TWL6040_HPLLENA; |
| break; |
| case 26000000: |
| /* PLL enabled, active mode */ |
| hppllctl |= TWL6040_MCLK_26000KHZ | |
| TWL6040_HPLLENA; |
| break; |
| case 38400000: |
| /* PLL enabled, bypass mode */ |
| hppllctl |= TWL6040_MCLK_38400KHZ | |
| TWL6040_HPLLBP | TWL6040_HPLLENA; |
| break; |
| default: |
| dev_err(twl6040->dev, |
| "freq_in %d not supported\n", freq_in); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| |
| /* |
| * enable clock slicer to ensure input waveform is |
| * square |
| */ |
| hppllctl |= TWL6040_HPLLSQRENA; |
| |
| twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, |
| hppllctl); |
| usleep_range(500, 700); |
| lppllctl |= TWL6040_HPLLSEL; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, |
| lppllctl); |
| lppllctl &= ~TWL6040_LPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, |
| lppllctl); |
| } |
| break; |
| default: |
| dev_err(twl6040->dev, "unknown pll id %d\n", pll_id); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| |
| twl6040->sysclk = freq_out; |
| twl6040->mclk = freq_in; |
| twl6040->pll = pll_id; |
| |
| pll_out: |
| mutex_unlock(&twl6040->mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6040_set_pll); |
| |
| int twl6040_get_pll(struct twl6040 *twl6040) |
| { |
| if (twl6040->power_count) |
| return twl6040->pll; |
| else |
| return -ENODEV; |
| } |
| EXPORT_SYMBOL(twl6040_get_pll); |
| |
| unsigned int twl6040_get_sysclk(struct twl6040 *twl6040) |
| { |
| return twl6040->sysclk; |
| } |
| EXPORT_SYMBOL(twl6040_get_sysclk); |
| |
| /* Get the combined status of the vibra control register */ |
| int twl6040_get_vibralr_status(struct twl6040 *twl6040) |
| { |
| unsigned int reg; |
| int ret; |
| u8 status; |
| |
| ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, ®); |
| if (ret != 0) |
| return ret; |
| status = reg; |
| |
| ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, ®); |
| if (ret != 0) |
| return ret; |
| status |= reg; |
| |
| status &= (TWL6040_VIBENA | TWL6040_VIBSEL); |
| |
| return status; |
| } |
| EXPORT_SYMBOL(twl6040_get_vibralr_status); |
| |
| static struct resource twl6040_vibra_rsrc[] = { |
| { |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource twl6040_codec_rsrc[] = { |
| { |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static bool twl6040_readable_reg(struct device *dev, unsigned int reg) |
| { |
| /* Register 0 is not readable */ |
| if (!reg) |
| return false; |
| return true; |
| } |
| |
| static bool twl6040_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case TWL6040_REG_ASICID: |
| case TWL6040_REG_ASICREV: |
| case TWL6040_REG_INTID: |
| case TWL6040_REG_LPPLLCTL: |
| case TWL6040_REG_HPPLLCTL: |
| case TWL6040_REG_STATUS: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool twl6040_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case TWL6040_REG_ASICID: |
| case TWL6040_REG_ASICREV: |
| case TWL6040_REG_STATUS: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static const struct regmap_config twl6040_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .reg_defaults = twl6040_defaults, |
| .num_reg_defaults = ARRAY_SIZE(twl6040_defaults), |
| |
| .max_register = TWL6040_REG_STATUS, /* 0x2e */ |
| |
| .readable_reg = twl6040_readable_reg, |
| .volatile_reg = twl6040_volatile_reg, |
| .writeable_reg = twl6040_writeable_reg, |
| |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static const struct regmap_irq twl6040_irqs[] = { |
| { .reg_offset = 0, .mask = TWL6040_THINT, }, |
| { .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, }, |
| { .reg_offset = 0, .mask = TWL6040_HOOKINT, }, |
| { .reg_offset = 0, .mask = TWL6040_HFINT, }, |
| { .reg_offset = 0, .mask = TWL6040_VIBINT, }, |
| { .reg_offset = 0, .mask = TWL6040_READYINT, }, |
| }; |
| |
| static struct regmap_irq_chip twl6040_irq_chip = { |
| .name = "twl6040", |
| .irqs = twl6040_irqs, |
| .num_irqs = ARRAY_SIZE(twl6040_irqs), |
| |
| .num_regs = 1, |
| .status_base = TWL6040_REG_INTID, |
| .mask_base = TWL6040_REG_INTMR, |
| }; |
| |
| static int twl6040_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device_node *node = client->dev.of_node; |
| struct twl6040 *twl6040; |
| struct mfd_cell *cell = NULL; |
| int irq, ret, children = 0; |
| |
| if (!node) { |
| dev_err(&client->dev, "of node is missing\n"); |
| return -EINVAL; |
| } |
| |
| /* In order to operate correctly we need valid interrupt config */ |
| if (!client->irq) { |
| dev_err(&client->dev, "Invalid IRQ configuration\n"); |
| return -EINVAL; |
| } |
| |
| twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040), |
| GFP_KERNEL); |
| if (!twl6040) |
| return -ENOMEM; |
| |
| twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config); |
| if (IS_ERR(twl6040->regmap)) |
| return PTR_ERR(twl6040->regmap); |
| |
| i2c_set_clientdata(client, twl6040); |
| |
| twl6040->clk32k = devm_clk_get(&client->dev, "clk32k"); |
| if (IS_ERR(twl6040->clk32k)) { |
| if (PTR_ERR(twl6040->clk32k) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_info(&client->dev, "clk32k is not handled\n"); |
| twl6040->clk32k = NULL; |
| } |
| |
| twl6040->supplies[0].supply = "vio"; |
| twl6040->supplies[1].supply = "v2v1"; |
| ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES, |
| twl6040->supplies); |
| if (ret != 0) { |
| dev_err(&client->dev, "Failed to get supplies: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies); |
| if (ret != 0) { |
| dev_err(&client->dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| twl6040->dev = &client->dev; |
| twl6040->irq = client->irq; |
| |
| mutex_init(&twl6040->mutex); |
| init_completion(&twl6040->ready); |
| |
| regmap_register_patch(twl6040->regmap, twl6040_patch, |
| ARRAY_SIZE(twl6040_patch)); |
| |
| twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV); |
| if (twl6040->rev < 0) { |
| dev_err(&client->dev, "Failed to read revision register: %d\n", |
| twl6040->rev); |
| ret = twl6040->rev; |
| goto gpio_err; |
| } |
| |
| /* ERRATA: Automatic power-up is not possible in ES1.0 */ |
| if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) |
| twl6040->audpwron = of_get_named_gpio(node, |
| "ti,audpwron-gpio", 0); |
| else |
| twl6040->audpwron = -EINVAL; |
| |
| if (gpio_is_valid(twl6040->audpwron)) { |
| ret = devm_gpio_request_one(&client->dev, twl6040->audpwron, |
| GPIOF_OUT_INIT_LOW, "audpwron"); |
| if (ret) |
| goto gpio_err; |
| |
| /* Clear any pending interrupt */ |
| twl6040_reg_read(twl6040, TWL6040_REG_INTID); |
| } |
| |
| ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT, |
| 0, &twl6040_irq_chip, &twl6040->irq_data); |
| if (ret < 0) |
| goto gpio_err; |
| |
| twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data, |
| TWL6040_IRQ_READY); |
| twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data, |
| TWL6040_IRQ_TH); |
| |
| ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL, |
| twl6040_readyint_handler, IRQF_ONESHOT, |
| "twl6040_irq_ready", twl6040); |
| if (ret) { |
| dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret); |
| goto readyirq_err; |
| } |
| |
| ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL, |
| twl6040_thint_handler, IRQF_ONESHOT, |
| "twl6040_irq_th", twl6040); |
| if (ret) { |
| dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret); |
| goto readyirq_err; |
| } |
| |
| /* |
| * The main functionality of twl6040 to provide audio on OMAP4+ systems. |
| * We can add the ASoC codec child whenever this driver has been loaded. |
| */ |
| irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG); |
| cell = &twl6040->cells[children]; |
| cell->name = "twl6040-codec"; |
| twl6040_codec_rsrc[0].start = irq; |
| twl6040_codec_rsrc[0].end = irq; |
| cell->resources = twl6040_codec_rsrc; |
| cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc); |
| children++; |
| |
| /* Vibra input driver support */ |
| if (twl6040_has_vibra(node)) { |
| irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB); |
| |
| cell = &twl6040->cells[children]; |
| cell->name = "twl6040-vibra"; |
| twl6040_vibra_rsrc[0].start = irq; |
| twl6040_vibra_rsrc[0].end = irq; |
| cell->resources = twl6040_vibra_rsrc; |
| cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc); |
| children++; |
| } |
| |
| /* GPO support */ |
| cell = &twl6040->cells[children]; |
| cell->name = "twl6040-gpo"; |
| children++; |
| |
| /* The chip is powered down so mark regmap to cache only and dirty */ |
| regcache_cache_only(twl6040->regmap, true); |
| regcache_mark_dirty(twl6040->regmap); |
| |
| ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children, |
| NULL, 0, NULL); |
| if (ret) |
| goto readyirq_err; |
| |
| return 0; |
| |
| readyirq_err: |
| regmap_del_irq_chip(twl6040->irq, twl6040->irq_data); |
| gpio_err: |
| regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies); |
| return ret; |
| } |
| |
| static int twl6040_remove(struct i2c_client *client) |
| { |
| struct twl6040 *twl6040 = i2c_get_clientdata(client); |
| |
| if (twl6040->power_count) |
| twl6040_power(twl6040, 0); |
| |
| regmap_del_irq_chip(twl6040->irq, twl6040->irq_data); |
| |
| mfd_remove_devices(&client->dev); |
| |
| regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id twl6040_i2c_id[] = { |
| { "twl6040", 0, }, |
| { "twl6041", 0, }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id); |
| |
| static struct i2c_driver twl6040_driver = { |
| .driver = { |
| .name = "twl6040", |
| }, |
| .probe = twl6040_probe, |
| .remove = twl6040_remove, |
| .id_table = twl6040_i2c_id, |
| }; |
| |
| module_i2c_driver(twl6040_driver); |
| |
| MODULE_DESCRIPTION("TWL6040 MFD"); |
| MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); |
| MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>"); |
| MODULE_LICENSE("GPL"); |