| #ifndef _GEN_PV_LOCK_SLOWPATH |
| #error "do not include this file" |
| #endif |
| |
| #include <linux/hash.h> |
| #include <linux/bootmem.h> |
| #include <linux/debug_locks.h> |
| |
| /* |
| * Implement paravirt qspinlocks; the general idea is to halt the vcpus instead |
| * of spinning them. |
| * |
| * This relies on the architecture to provide two paravirt hypercalls: |
| * |
| * pv_wait(u8 *ptr, u8 val) -- suspends the vcpu if *ptr == val |
| * pv_kick(cpu) -- wakes a suspended vcpu |
| * |
| * Using these we implement __pv_queued_spin_lock_slowpath() and |
| * __pv_queued_spin_unlock() to replace native_queued_spin_lock_slowpath() and |
| * native_queued_spin_unlock(). |
| */ |
| |
| #define _Q_SLOW_VAL (3U << _Q_LOCKED_OFFSET) |
| |
| /* |
| * Queue node uses: vcpu_running & vcpu_halted. |
| * Queue head uses: vcpu_running & vcpu_hashed. |
| */ |
| enum vcpu_state { |
| vcpu_running = 0, |
| vcpu_halted, /* Used only in pv_wait_node */ |
| vcpu_hashed, /* = pv_hash'ed + vcpu_halted */ |
| }; |
| |
| struct pv_node { |
| struct mcs_spinlock mcs; |
| struct mcs_spinlock __res[3]; |
| |
| int cpu; |
| u8 state; |
| }; |
| |
| /* |
| * Lock and MCS node addresses hash table for fast lookup |
| * |
| * Hashing is done on a per-cacheline basis to minimize the need to access |
| * more than one cacheline. |
| * |
| * Dynamically allocate a hash table big enough to hold at least 4X the |
| * number of possible cpus in the system. Allocation is done on page |
| * granularity. So the minimum number of hash buckets should be at least |
| * 256 (64-bit) or 512 (32-bit) to fully utilize a 4k page. |
| * |
| * Since we should not be holding locks from NMI context (very rare indeed) the |
| * max load factor is 0.75, which is around the point where open addressing |
| * breaks down. |
| * |
| */ |
| struct pv_hash_entry { |
| struct qspinlock *lock; |
| struct pv_node *node; |
| }; |
| |
| #define PV_HE_PER_LINE (SMP_CACHE_BYTES / sizeof(struct pv_hash_entry)) |
| #define PV_HE_MIN (PAGE_SIZE / sizeof(struct pv_hash_entry)) |
| |
| static struct pv_hash_entry *pv_lock_hash; |
| static unsigned int pv_lock_hash_bits __read_mostly; |
| |
| /* |
| * Allocate memory for the PV qspinlock hash buckets |
| * |
| * This function should be called from the paravirt spinlock initialization |
| * routine. |
| */ |
| void __init __pv_init_lock_hash(void) |
| { |
| int pv_hash_size = ALIGN(4 * num_possible_cpus(), PV_HE_PER_LINE); |
| |
| if (pv_hash_size < PV_HE_MIN) |
| pv_hash_size = PV_HE_MIN; |
| |
| /* |
| * Allocate space from bootmem which should be page-size aligned |
| * and hence cacheline aligned. |
| */ |
| pv_lock_hash = alloc_large_system_hash("PV qspinlock", |
| sizeof(struct pv_hash_entry), |
| pv_hash_size, 0, HASH_EARLY, |
| &pv_lock_hash_bits, NULL, |
| pv_hash_size, pv_hash_size); |
| } |
| |
| #define for_each_hash_entry(he, offset, hash) \ |
| for (hash &= ~(PV_HE_PER_LINE - 1), he = &pv_lock_hash[hash], offset = 0; \ |
| offset < (1 << pv_lock_hash_bits); \ |
| offset++, he = &pv_lock_hash[(hash + offset) & ((1 << pv_lock_hash_bits) - 1)]) |
| |
| static struct qspinlock **pv_hash(struct qspinlock *lock, struct pv_node *node) |
| { |
| unsigned long offset, hash = hash_ptr(lock, pv_lock_hash_bits); |
| struct pv_hash_entry *he; |
| |
| for_each_hash_entry(he, offset, hash) { |
| if (!cmpxchg(&he->lock, NULL, lock)) { |
| WRITE_ONCE(he->node, node); |
| return &he->lock; |
| } |
| } |
| /* |
| * Hard assume there is a free entry for us. |
| * |
| * This is guaranteed by ensuring every blocked lock only ever consumes |
| * a single entry, and since we only have 4 nesting levels per CPU |
| * and allocated 4*nr_possible_cpus(), this must be so. |
| * |
| * The single entry is guaranteed by having the lock owner unhash |
| * before it releases. |
| */ |
| BUG(); |
| } |
| |
| static struct pv_node *pv_unhash(struct qspinlock *lock) |
| { |
| unsigned long offset, hash = hash_ptr(lock, pv_lock_hash_bits); |
| struct pv_hash_entry *he; |
| struct pv_node *node; |
| |
| for_each_hash_entry(he, offset, hash) { |
| if (READ_ONCE(he->lock) == lock) { |
| node = READ_ONCE(he->node); |
| WRITE_ONCE(he->lock, NULL); |
| return node; |
| } |
| } |
| /* |
| * Hard assume we'll find an entry. |
| * |
| * This guarantees a limited lookup time and is itself guaranteed by |
| * having the lock owner do the unhash -- IFF the unlock sees the |
| * SLOW flag, there MUST be a hash entry. |
| */ |
| BUG(); |
| } |
| |
| /* |
| * Initialize the PV part of the mcs_spinlock node. |
| */ |
| static void pv_init_node(struct mcs_spinlock *node) |
| { |
| struct pv_node *pn = (struct pv_node *)node; |
| |
| BUILD_BUG_ON(sizeof(struct pv_node) > 5*sizeof(struct mcs_spinlock)); |
| |
| pn->cpu = smp_processor_id(); |
| pn->state = vcpu_running; |
| } |
| |
| /* |
| * Wait for node->locked to become true, halt the vcpu after a short spin. |
| * pv_kick_node() is used to set _Q_SLOW_VAL and fill in hash table on its |
| * behalf. |
| */ |
| static void pv_wait_node(struct mcs_spinlock *node) |
| { |
| struct pv_node *pn = (struct pv_node *)node; |
| int loop; |
| |
| for (;;) { |
| for (loop = SPIN_THRESHOLD; loop; loop--) { |
| if (READ_ONCE(node->locked)) |
| return; |
| cpu_relax(); |
| } |
| |
| /* |
| * Order pn->state vs pn->locked thusly: |
| * |
| * [S] pn->state = vcpu_halted [S] next->locked = 1 |
| * MB MB |
| * [L] pn->locked [RmW] pn->state = vcpu_hashed |
| * |
| * Matches the cmpxchg() from pv_kick_node(). |
| */ |
| smp_store_mb(pn->state, vcpu_halted); |
| |
| if (!READ_ONCE(node->locked)) |
| pv_wait(&pn->state, vcpu_halted); |
| |
| /* |
| * If pv_kick_node() changed us to vcpu_hashed, retain that value |
| * so that pv_wait_head() knows to not also try to hash this lock. |
| */ |
| cmpxchg(&pn->state, vcpu_halted, vcpu_running); |
| |
| /* |
| * If the locked flag is still not set after wakeup, it is a |
| * spurious wakeup and the vCPU should wait again. However, |
| * there is a pretty high overhead for CPU halting and kicking. |
| * So it is better to spin for a while in the hope that the |
| * MCS lock will be released soon. |
| */ |
| } |
| |
| /* |
| * By now our node->locked should be 1 and our caller will not actually |
| * spin-wait for it. We do however rely on our caller to do a |
| * load-acquire for us. |
| */ |
| } |
| |
| /* |
| * Called after setting next->locked = 1 when we're the lock owner. |
| * |
| * Instead of waking the waiters stuck in pv_wait_node() advance their state such |
| * that they're waiting in pv_wait_head(), this avoids a wake/sleep cycle. |
| */ |
| static void pv_kick_node(struct qspinlock *lock, struct mcs_spinlock *node) |
| { |
| struct pv_node *pn = (struct pv_node *)node; |
| struct __qspinlock *l = (void *)lock; |
| |
| /* |
| * If the vCPU is indeed halted, advance its state to match that of |
| * pv_wait_node(). If OTOH this fails, the vCPU was running and will |
| * observe its next->locked value and advance itself. |
| * |
| * Matches with smp_store_mb() and cmpxchg() in pv_wait_node() |
| */ |
| if (cmpxchg(&pn->state, vcpu_halted, vcpu_hashed) != vcpu_halted) |
| return; |
| |
| /* |
| * Put the lock into the hash table and set the _Q_SLOW_VAL. |
| * |
| * As this is the same vCPU that will check the _Q_SLOW_VAL value and |
| * the hash table later on at unlock time, no atomic instruction is |
| * needed. |
| */ |
| WRITE_ONCE(l->locked, _Q_SLOW_VAL); |
| (void)pv_hash(lock, pn); |
| } |
| |
| /* |
| * Wait for l->locked to become clear; halt the vcpu after a short spin. |
| * __pv_queued_spin_unlock() will wake us. |
| */ |
| static void pv_wait_head(struct qspinlock *lock, struct mcs_spinlock *node) |
| { |
| struct pv_node *pn = (struct pv_node *)node; |
| struct __qspinlock *l = (void *)lock; |
| struct qspinlock **lp = NULL; |
| int loop; |
| |
| /* |
| * If pv_kick_node() already advanced our state, we don't need to |
| * insert ourselves into the hash table anymore. |
| */ |
| if (READ_ONCE(pn->state) == vcpu_hashed) |
| lp = (struct qspinlock **)1; |
| |
| for (;;) { |
| for (loop = SPIN_THRESHOLD; loop; loop--) { |
| if (!READ_ONCE(l->locked)) |
| return; |
| cpu_relax(); |
| } |
| |
| if (!lp) { /* ONCE */ |
| lp = pv_hash(lock, pn); |
| |
| /* |
| * We must hash before setting _Q_SLOW_VAL, such that |
| * when we observe _Q_SLOW_VAL in __pv_queued_spin_unlock() |
| * we'll be sure to be able to observe our hash entry. |
| * |
| * [S] <hash> [Rmw] l->locked == _Q_SLOW_VAL |
| * MB RMB |
| * [RmW] l->locked = _Q_SLOW_VAL [L] <unhash> |
| * |
| * Matches the smp_rmb() in __pv_queued_spin_unlock(). |
| */ |
| if (!cmpxchg(&l->locked, _Q_LOCKED_VAL, _Q_SLOW_VAL)) { |
| /* |
| * The lock is free and _Q_SLOW_VAL has never |
| * been set. Therefore we need to unhash before |
| * getting the lock. |
| */ |
| WRITE_ONCE(*lp, NULL); |
| return; |
| } |
| } |
| pv_wait(&l->locked, _Q_SLOW_VAL); |
| |
| /* |
| * The unlocker should have freed the lock before kicking the |
| * CPU. So if the lock is still not free, it is a spurious |
| * wakeup and so the vCPU should wait again after spinning for |
| * a while. |
| */ |
| } |
| |
| /* |
| * Lock is unlocked now; the caller will acquire it without waiting. |
| * As with pv_wait_node() we rely on the caller to do a load-acquire |
| * for us. |
| */ |
| } |
| |
| /* |
| * PV version of the unlock function to be used in stead of |
| * queued_spin_unlock(). |
| */ |
| __visible void __pv_queued_spin_unlock(struct qspinlock *lock) |
| { |
| struct __qspinlock *l = (void *)lock; |
| struct pv_node *node; |
| u8 locked; |
| |
| /* |
| * We must not unlock if SLOW, because in that case we must first |
| * unhash. Otherwise it would be possible to have multiple @lock |
| * entries, which would be BAD. |
| */ |
| locked = cmpxchg(&l->locked, _Q_LOCKED_VAL, 0); |
| if (likely(locked == _Q_LOCKED_VAL)) |
| return; |
| |
| if (unlikely(locked != _Q_SLOW_VAL)) { |
| WARN(!debug_locks_silent, |
| "pvqspinlock: lock 0x%lx has corrupted value 0x%x!\n", |
| (unsigned long)lock, atomic_read(&lock->val)); |
| return; |
| } |
| |
| /* |
| * A failed cmpxchg doesn't provide any memory-ordering guarantees, |
| * so we need a barrier to order the read of the node data in |
| * pv_unhash *after* we've read the lock being _Q_SLOW_VAL. |
| * |
| * Matches the cmpxchg() in pv_wait_head() setting _Q_SLOW_VAL. |
| */ |
| smp_rmb(); |
| |
| /* |
| * Since the above failed to release, this must be the SLOW path. |
| * Therefore start by looking up the blocked node and unhashing it. |
| */ |
| node = pv_unhash(lock); |
| |
| /* |
| * Now that we have a reference to the (likely) blocked pv_node, |
| * release the lock. |
| */ |
| smp_store_release(&l->locked, 0); |
| |
| /* |
| * At this point the memory pointed at by lock can be freed/reused, |
| * however we can still use the pv_node to kick the CPU. |
| * The other vCPU may not really be halted, but kicking an active |
| * vCPU is harmless other than the additional latency in completing |
| * the unlock. |
| */ |
| pv_kick(node->cpu); |
| } |
| /* |
| * Include the architecture specific callee-save thunk of the |
| * __pv_queued_spin_unlock(). This thunk is put together with |
| * __pv_queued_spin_unlock() near the top of the file to make sure |
| * that the callee-save thunk and the real unlock function are close |
| * to each other sharing consecutive instruction cachelines. |
| */ |
| #include <asm/qspinlock_paravirt.h> |
| |