| /* |
| * Queued spinlock |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P. |
| * (C) Copyright 2013-2014 Red Hat, Inc. |
| * (C) Copyright 2015 Intel Corp. |
| * |
| * Authors: Waiman Long <waiman.long@hp.com> |
| * Peter Zijlstra <peterz@infradead.org> |
| */ |
| |
| #ifndef _GEN_PV_LOCK_SLOWPATH |
| |
| #include <linux/smp.h> |
| #include <linux/bug.h> |
| #include <linux/cpumask.h> |
| #include <linux/percpu.h> |
| #include <linux/hardirq.h> |
| #include <linux/mutex.h> |
| #include <asm/byteorder.h> |
| #include <asm/qspinlock.h> |
| |
| /* |
| * The basic principle of a queue-based spinlock can best be understood |
| * by studying a classic queue-based spinlock implementation called the |
| * MCS lock. The paper below provides a good description for this kind |
| * of lock. |
| * |
| * http://www.cise.ufl.edu/tr/DOC/REP-1992-71.pdf |
| * |
| * This queued spinlock implementation is based on the MCS lock, however to make |
| * it fit the 4 bytes we assume spinlock_t to be, and preserve its existing |
| * API, we must modify it somehow. |
| * |
| * In particular; where the traditional MCS lock consists of a tail pointer |
| * (8 bytes) and needs the next pointer (another 8 bytes) of its own node to |
| * unlock the next pending (next->locked), we compress both these: {tail, |
| * next->locked} into a single u32 value. |
| * |
| * Since a spinlock disables recursion of its own context and there is a limit |
| * to the contexts that can nest; namely: task, softirq, hardirq, nmi. As there |
| * are at most 4 nesting levels, it can be encoded by a 2-bit number. Now |
| * we can encode the tail by combining the 2-bit nesting level with the cpu |
| * number. With one byte for the lock value and 3 bytes for the tail, only a |
| * 32-bit word is now needed. Even though we only need 1 bit for the lock, |
| * we extend it to a full byte to achieve better performance for architectures |
| * that support atomic byte write. |
| * |
| * We also change the first spinner to spin on the lock bit instead of its |
| * node; whereby avoiding the need to carry a node from lock to unlock, and |
| * preserving existing lock API. This also makes the unlock code simpler and |
| * faster. |
| * |
| * N.B. The current implementation only supports architectures that allow |
| * atomic operations on smaller 8-bit and 16-bit data types. |
| * |
| */ |
| |
| #include "mcs_spinlock.h" |
| |
| #ifdef CONFIG_PARAVIRT_SPINLOCKS |
| #define MAX_NODES 8 |
| #else |
| #define MAX_NODES 4 |
| #endif |
| |
| /* |
| * Per-CPU queue node structures; we can never have more than 4 nested |
| * contexts: task, softirq, hardirq, nmi. |
| * |
| * Exactly fits one 64-byte cacheline on a 64-bit architecture. |
| * |
| * PV doubles the storage and uses the second cacheline for PV state. |
| */ |
| static DEFINE_PER_CPU_ALIGNED(struct mcs_spinlock, mcs_nodes[MAX_NODES]); |
| |
| /* |
| * We must be able to distinguish between no-tail and the tail at 0:0, |
| * therefore increment the cpu number by one. |
| */ |
| |
| static inline u32 encode_tail(int cpu, int idx) |
| { |
| u32 tail; |
| |
| #ifdef CONFIG_DEBUG_SPINLOCK |
| BUG_ON(idx > 3); |
| #endif |
| tail = (cpu + 1) << _Q_TAIL_CPU_OFFSET; |
| tail |= idx << _Q_TAIL_IDX_OFFSET; /* assume < 4 */ |
| |
| return tail; |
| } |
| |
| static inline struct mcs_spinlock *decode_tail(u32 tail) |
| { |
| int cpu = (tail >> _Q_TAIL_CPU_OFFSET) - 1; |
| int idx = (tail & _Q_TAIL_IDX_MASK) >> _Q_TAIL_IDX_OFFSET; |
| |
| return per_cpu_ptr(&mcs_nodes[idx], cpu); |
| } |
| |
| #define _Q_LOCKED_PENDING_MASK (_Q_LOCKED_MASK | _Q_PENDING_MASK) |
| |
| /* |
| * By using the whole 2nd least significant byte for the pending bit, we |
| * can allow better optimization of the lock acquisition for the pending |
| * bit holder. |
| * |
| * This internal structure is also used by the set_locked function which |
| * is not restricted to _Q_PENDING_BITS == 8. |
| */ |
| struct __qspinlock { |
| union { |
| atomic_t val; |
| #ifdef __LITTLE_ENDIAN |
| struct { |
| u8 locked; |
| u8 pending; |
| }; |
| struct { |
| u16 locked_pending; |
| u16 tail; |
| }; |
| #else |
| struct { |
| u16 tail; |
| u16 locked_pending; |
| }; |
| struct { |
| u8 reserved[2]; |
| u8 pending; |
| u8 locked; |
| }; |
| #endif |
| }; |
| }; |
| |
| #if _Q_PENDING_BITS == 8 |
| /** |
| * clear_pending_set_locked - take ownership and clear the pending bit. |
| * @lock: Pointer to queued spinlock structure |
| * |
| * *,1,0 -> *,0,1 |
| * |
| * Lock stealing is not allowed if this function is used. |
| */ |
| static __always_inline void clear_pending_set_locked(struct qspinlock *lock) |
| { |
| struct __qspinlock *l = (void *)lock; |
| |
| WRITE_ONCE(l->locked_pending, _Q_LOCKED_VAL); |
| } |
| |
| /* |
| * xchg_tail - Put in the new queue tail code word & retrieve previous one |
| * @lock : Pointer to queued spinlock structure |
| * @tail : The new queue tail code word |
| * Return: The previous queue tail code word |
| * |
| * xchg(lock, tail) |
| * |
| * p,*,* -> n,*,* ; prev = xchg(lock, node) |
| */ |
| static __always_inline u32 xchg_tail(struct qspinlock *lock, u32 tail) |
| { |
| struct __qspinlock *l = (void *)lock; |
| |
| return (u32)xchg(&l->tail, tail >> _Q_TAIL_OFFSET) << _Q_TAIL_OFFSET; |
| } |
| |
| #else /* _Q_PENDING_BITS == 8 */ |
| |
| /** |
| * clear_pending_set_locked - take ownership and clear the pending bit. |
| * @lock: Pointer to queued spinlock structure |
| * |
| * *,1,0 -> *,0,1 |
| */ |
| static __always_inline void clear_pending_set_locked(struct qspinlock *lock) |
| { |
| atomic_add(-_Q_PENDING_VAL + _Q_LOCKED_VAL, &lock->val); |
| } |
| |
| /** |
| * xchg_tail - Put in the new queue tail code word & retrieve previous one |
| * @lock : Pointer to queued spinlock structure |
| * @tail : The new queue tail code word |
| * Return: The previous queue tail code word |
| * |
| * xchg(lock, tail) |
| * |
| * p,*,* -> n,*,* ; prev = xchg(lock, node) |
| */ |
| static __always_inline u32 xchg_tail(struct qspinlock *lock, u32 tail) |
| { |
| u32 old, new, val = atomic_read(&lock->val); |
| |
| for (;;) { |
| new = (val & _Q_LOCKED_PENDING_MASK) | tail; |
| old = atomic_cmpxchg(&lock->val, val, new); |
| if (old == val) |
| break; |
| |
| val = old; |
| } |
| return old; |
| } |
| #endif /* _Q_PENDING_BITS == 8 */ |
| |
| /** |
| * set_locked - Set the lock bit and own the lock |
| * @lock: Pointer to queued spinlock structure |
| * |
| * *,*,0 -> *,0,1 |
| */ |
| static __always_inline void set_locked(struct qspinlock *lock) |
| { |
| struct __qspinlock *l = (void *)lock; |
| |
| WRITE_ONCE(l->locked, _Q_LOCKED_VAL); |
| } |
| |
| |
| /* |
| * Generate the native code for queued_spin_unlock_slowpath(); provide NOPs for |
| * all the PV callbacks. |
| */ |
| |
| static __always_inline void __pv_init_node(struct mcs_spinlock *node) { } |
| static __always_inline void __pv_wait_node(struct mcs_spinlock *node) { } |
| static __always_inline void __pv_kick_node(struct qspinlock *lock, |
| struct mcs_spinlock *node) { } |
| static __always_inline void __pv_wait_head(struct qspinlock *lock, |
| struct mcs_spinlock *node) { } |
| |
| #define pv_enabled() false |
| |
| #define pv_init_node __pv_init_node |
| #define pv_wait_node __pv_wait_node |
| #define pv_kick_node __pv_kick_node |
| #define pv_wait_head __pv_wait_head |
| |
| #ifdef CONFIG_PARAVIRT_SPINLOCKS |
| #define queued_spin_lock_slowpath native_queued_spin_lock_slowpath |
| #endif |
| |
| /* |
| * queued_spin_lock_slowpath() can (load-)ACQUIRE the lock before |
| * issuing an _unordered_ store to set _Q_LOCKED_VAL. |
| * |
| * This means that the store can be delayed, but no later than the |
| * store-release from the unlock. This means that simply observing |
| * _Q_LOCKED_VAL is not sufficient to determine if the lock is acquired. |
| * |
| * There are two paths that can issue the unordered store: |
| * |
| * (1) clear_pending_set_locked(): *,1,0 -> *,0,1 |
| * |
| * (2) set_locked(): t,0,0 -> t,0,1 ; t != 0 |
| * atomic_cmpxchg_relaxed(): t,0,0 -> 0,0,1 |
| * |
| * However, in both cases we have other !0 state we've set before to queue |
| * ourseves: |
| * |
| * For (1) we have the atomic_cmpxchg_acquire() that set _Q_PENDING_VAL, our |
| * load is constrained by that ACQUIRE to not pass before that, and thus must |
| * observe the store. |
| * |
| * For (2) we have a more intersting scenario. We enqueue ourselves using |
| * xchg_tail(), which ends up being a RELEASE. This in itself is not |
| * sufficient, however that is followed by an smp_cond_acquire() on the same |
| * word, giving a RELEASE->ACQUIRE ordering. This again constrains our load and |
| * guarantees we must observe that store. |
| * |
| * Therefore both cases have other !0 state that is observable before the |
| * unordered locked byte store comes through. This means we can use that to |
| * wait for the lock store, and then wait for an unlock. |
| */ |
| #ifndef queued_spin_unlock_wait |
| void queued_spin_unlock_wait(struct qspinlock *lock) |
| { |
| u32 val; |
| |
| for (;;) { |
| val = atomic_read(&lock->val); |
| |
| if (!val) /* not locked, we're done */ |
| goto done; |
| |
| if (val & _Q_LOCKED_MASK) /* locked, go wait for unlock */ |
| break; |
| |
| /* not locked, but pending, wait until we observe the lock */ |
| cpu_relax(); |
| } |
| |
| /* any unlock is good */ |
| while (atomic_read(&lock->val) & _Q_LOCKED_MASK) |
| cpu_relax(); |
| |
| done: |
| smp_rmb(); /* CTRL + RMB -> ACQUIRE */ |
| } |
| EXPORT_SYMBOL(queued_spin_unlock_wait); |
| #endif |
| |
| #endif /* _GEN_PV_LOCK_SLOWPATH */ |
| |
| /** |
| * queued_spin_lock_slowpath - acquire the queued spinlock |
| * @lock: Pointer to queued spinlock structure |
| * @val: Current value of the queued spinlock 32-bit word |
| * |
| * (queue tail, pending bit, lock value) |
| * |
| * fast : slow : unlock |
| * : : |
| * uncontended (0,0,0) -:--> (0,0,1) ------------------------------:--> (*,*,0) |
| * : | ^--------.------. / : |
| * : v \ \ | : |
| * pending : (0,1,1) +--> (0,1,0) \ | : |
| * : | ^--' | | : |
| * : v | | : |
| * uncontended : (n,x,y) +--> (n,0,0) --' | : |
| * queue : | ^--' | : |
| * : v | : |
| * contended : (*,x,y) +--> (*,0,0) ---> (*,0,1) -' : |
| * queue : ^--' : |
| */ |
| void queued_spin_lock_slowpath(struct qspinlock *lock, u32 val) |
| { |
| struct mcs_spinlock *prev, *next, *node; |
| u32 new, old, tail; |
| int idx; |
| |
| BUILD_BUG_ON(CONFIG_NR_CPUS >= (1U << _Q_TAIL_CPU_BITS)); |
| |
| if (pv_enabled()) |
| goto queue; |
| |
| if (virt_spin_lock(lock)) |
| return; |
| |
| /* |
| * wait for in-progress pending->locked hand-overs |
| * |
| * 0,1,0 -> 0,0,1 |
| */ |
| if (val == _Q_PENDING_VAL) { |
| while ((val = atomic_read(&lock->val)) == _Q_PENDING_VAL) |
| cpu_relax(); |
| } |
| |
| /* |
| * trylock || pending |
| * |
| * 0,0,0 -> 0,0,1 ; trylock |
| * 0,0,1 -> 0,1,1 ; pending |
| */ |
| for (;;) { |
| /* |
| * If we observe any contention; queue. |
| */ |
| if (val & ~_Q_LOCKED_MASK) |
| goto queue; |
| |
| new = _Q_LOCKED_VAL; |
| if (val == new) |
| new |= _Q_PENDING_VAL; |
| |
| old = atomic_cmpxchg(&lock->val, val, new); |
| if (old == val) |
| break; |
| |
| val = old; |
| } |
| |
| /* |
| * we won the trylock |
| */ |
| if (new == _Q_LOCKED_VAL) |
| return; |
| |
| /* |
| * we're pending, wait for the owner to go away. |
| * |
| * *,1,1 -> *,1,0 |
| * |
| * this wait loop must be a load-acquire such that we match the |
| * store-release that clears the locked bit and create lock |
| * sequentiality; this is because not all clear_pending_set_locked() |
| * implementations imply full barriers. |
| */ |
| while ((val = smp_load_acquire(&lock->val.counter)) & _Q_LOCKED_MASK) |
| cpu_relax(); |
| |
| /* |
| * take ownership and clear the pending bit. |
| * |
| * *,1,0 -> *,0,1 |
| */ |
| clear_pending_set_locked(lock); |
| return; |
| |
| /* |
| * End of pending bit optimistic spinning and beginning of MCS |
| * queuing. |
| */ |
| queue: |
| node = this_cpu_ptr(&mcs_nodes[0]); |
| idx = node->count++; |
| tail = encode_tail(smp_processor_id(), idx); |
| |
| node += idx; |
| |
| /* |
| * Ensure that we increment the head node->count before initialising |
| * the actual node. If the compiler is kind enough to reorder these |
| * stores, then an IRQ could overwrite our assignments. |
| */ |
| barrier(); |
| |
| node->locked = 0; |
| node->next = NULL; |
| pv_init_node(node); |
| |
| /* |
| * We touched a (possibly) cold cacheline in the per-cpu queue node; |
| * attempt the trylock once more in the hope someone let go while we |
| * weren't watching. |
| */ |
| if (queued_spin_trylock(lock)) |
| goto release; |
| |
| /* |
| * We have already touched the queueing cacheline; don't bother with |
| * pending stuff. |
| * |
| * p,*,* -> n,*,* |
| */ |
| old = xchg_tail(lock, tail); |
| |
| /* |
| * if there was a previous node; link it and wait until reaching the |
| * head of the waitqueue. |
| */ |
| if (old & _Q_TAIL_MASK) { |
| prev = decode_tail(old); |
| WRITE_ONCE(prev->next, node); |
| |
| pv_wait_node(node); |
| arch_mcs_spin_lock_contended(&node->locked); |
| } |
| |
| /* |
| * we're at the head of the waitqueue, wait for the owner & pending to |
| * go away. |
| * |
| * *,x,y -> *,0,0 |
| * |
| * this wait loop must use a load-acquire such that we match the |
| * store-release that clears the locked bit and create lock |
| * sequentiality; this is because the set_locked() function below |
| * does not imply a full barrier. |
| * |
| */ |
| pv_wait_head(lock, node); |
| while ((val = smp_load_acquire(&lock->val.counter)) & _Q_LOCKED_PENDING_MASK) |
| cpu_relax(); |
| |
| /* |
| * claim the lock: |
| * |
| * n,0,0 -> 0,0,1 : lock, uncontended |
| * *,0,0 -> *,0,1 : lock, contended |
| * |
| * If the queue head is the only one in the queue (lock value == tail), |
| * clear the tail code and grab the lock. Otherwise, we only need |
| * to grab the lock. |
| */ |
| for (;;) { |
| if (val != tail) { |
| set_locked(lock); |
| break; |
| } |
| old = atomic_cmpxchg(&lock->val, val, _Q_LOCKED_VAL); |
| if (old == val) |
| goto release; /* No contention */ |
| |
| val = old; |
| } |
| |
| /* |
| * contended path; wait for next, release. |
| */ |
| while (!(next = READ_ONCE(node->next))) |
| cpu_relax(); |
| |
| arch_mcs_spin_unlock_contended(&next->locked); |
| pv_kick_node(lock, next); |
| |
| release: |
| /* |
| * release the node |
| */ |
| this_cpu_dec(mcs_nodes[0].count); |
| } |
| EXPORT_SYMBOL(queued_spin_lock_slowpath); |
| |
| /* |
| * Generate the paravirt code for queued_spin_unlock_slowpath(). |
| */ |
| #if !defined(_GEN_PV_LOCK_SLOWPATH) && defined(CONFIG_PARAVIRT_SPINLOCKS) |
| #define _GEN_PV_LOCK_SLOWPATH |
| |
| #undef pv_enabled |
| #define pv_enabled() true |
| |
| #undef pv_init_node |
| #undef pv_wait_node |
| #undef pv_kick_node |
| #undef pv_wait_head |
| |
| #undef queued_spin_lock_slowpath |
| #define queued_spin_lock_slowpath __pv_queued_spin_lock_slowpath |
| |
| #include "qspinlock_paravirt.h" |
| #include "qspinlock.c" |
| |
| #endif |