| /* |
| * max77823_fuelgauge.c |
| * Samsung MAX77823 Fuel Gauge Driver |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define DEBUG |
| |
| #include <linux/mfd/max77823-private.h> |
| #include <linux/of_gpio.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| |
| static enum power_supply_property max77823_fuelgauge_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_VOLTAGE_AVG, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CURRENT_AVG, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_ENERGY_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_TEMP_AMBIENT, |
| }; |
| |
| #ifdef CONFIG_FUELGAUGE_MAX77823_VOLTAGE_TRACKING |
| static void max77823_init_regs(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| |
| if (max77823_read_reg(fuelgauge->i2c, MAX77823_REG_FILTERCFG, data) < 0) |
| return; |
| |
| /* Clear average vcell (12 sec) */ |
| data[0] &= 0x8f; |
| |
| max77823_write_reg(fuelgauge->i2c, MAX77823_REG_FILTERCFG, data); |
| } |
| |
| static void max77823_get_version(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| |
| if (max77823_read_reg(fuelgauge->i2c, MAX77823_REG_VERSION, data) < 0) |
| return; |
| |
| pr_debug("MAX77823 Fuel-Gauge Ver %d%d\n", |
| data[0], data[1]); |
| } |
| |
| static void max77823_alert_init(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| |
| /* SALRT Threshold setting */ |
| data[0] = fuelgauge->pdata->fuel_alert_soc; |
| data[1] = 0xff; |
| max77823_write_reg(fuelgauge->i2c, MAX77823_REG_SALRT_TH, data); |
| |
| /* VALRT Threshold setting */ |
| data[0] = 0x00; |
| data[1] = 0xff; |
| max77823_write_reg(fuelgauge->i2c, MAX77823_REG_VALRT_TH, data); |
| |
| /* TALRT Threshold setting */ |
| data[0] = 0x80; |
| data[1] = 0x7f; |
| max77823_write_reg(fuelgauge->i2c, MAX77823_REG_TALRT_TH, data); |
| } |
| |
| static bool max77823_check_status(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| bool ret = false; |
| |
| /* check if Smn was generated */ |
| if (max77823_read_reg(fuelgauge->i2c, MAX77823_REG_STATUS, data) < 0) |
| return ret; |
| |
| pr_info("%s: status_reg(%02x%02x)\n", |
| __func__, data[1], data[0]); |
| |
| /* minimum SOC threshold exceeded. */ |
| if (data[1] & (0x1 << 2)) |
| ret = true; |
| |
| /* clear status reg */ |
| if (!ret) { |
| data[1] = 0; |
| max77823_write_reg(fuelgauge->i2c, MAX77823_REG_STATUS, data); |
| msleep(200); |
| } |
| |
| return ret; |
| } |
| |
| static int max77823_set_temperature(struct max77823_fuelgauge_data *fuelgauge, |
| int temperature) |
| { |
| u8 data[2]; |
| |
| data[0] = 0; |
| data[1] = temperature; |
| max77823_write_reg(fuelgauge->i2c, MAX77823_REG_TEMPERATURE, data); |
| |
| pr_debug("%s: temperature to (%d)\n", __func__, temperature); |
| |
| return temperature; |
| } |
| |
| static int max77823_get_temperature(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| s32 temperature = 0; |
| |
| if (max77823_read_reg(fuelgauge->i2c, |
| MAX77823_REG_TEMPERATURE, data) < 0) |
| return -ERANGE; |
| |
| /* data[] store 2's compliment format number */ |
| if (data[1] & (0x1 << 7)) { |
| /* Negative */ |
| temperature = ((~(data[1])) & 0xFF) + 1; |
| temperature *= (-1000); |
| } else { |
| temperature = data[1] & 0x7F; |
| temperature *= 1000; |
| temperature += data[0] * 39 / 10; |
| } |
| |
| pr_debug("%s: temperature (%d)\n", __func__, temperature); |
| |
| return temperature; |
| } |
| |
| /* soc should be 0.01% unit */ |
| static int max77823_get_soc(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int soc; |
| |
| if (max77823_read_reg(fuelgauge->i2c, MAX77823_REG_SOC_VF, data) < 0) |
| return -EINVAL; |
| |
| soc = ((data[1] * 100) + (data[0] * 100 / 256)); |
| |
| pr_debug("%s: raw capacity (%d)\n", __func__, soc); |
| |
| return min(soc, 10000); |
| } |
| |
| static int max77823_get_vfocv(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 vfocv = 0; |
| |
| if (max77823_read_reg(fuelgauge->i2c, MAX77823_REG_VFOCV, data) < 0) |
| return -EINVAL; |
| |
| vfocv = ((data[0] >> 3) + (data[1] << 5)) * 625 / 1000; |
| |
| pr_debug("%s: vfocv (%d)\n", __func__, vfocv); |
| |
| return vfocv; |
| } |
| |
| static int max77823_get_vcell(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 vcell = 0; |
| |
| if (max77823_read_reg(fuelgauge->i2c, MAX77823_REG_VCELL, data) < 0) |
| return -EINVAL; |
| |
| vcell = ((data[0] >> 3) + (data[1] << 5)) * 625 / 1000; |
| |
| pr_debug("%s: vcell (%d)\n", __func__, vcell); |
| |
| return vcell; |
| } |
| |
| static int max77823_get_avgvcell(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 avgvcell = 0; |
| |
| if (max77823_read_reg(fuelgauge->i2c, MAX77823_REG_AVGVCELL, data) < 0) |
| return -EINVAL; |
| |
| avgvcell = ((data[0] >> 3) + (data[1] << 5)) * 625 / 1000; |
| |
| pr_debug("%s: avgvcell (%d)\n", __func__, avgvcell); |
| |
| return avgvcell; |
| } |
| |
| bool max77823_fg_init(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| /* initialize fuel gauge registers */ |
| max77823_init_regs(fuelgauge); |
| |
| max77823_get_version(fuelgauge); |
| |
| return true; |
| } |
| |
| bool max77823_fg_fuelalert_init(struct max77823_fuelgauge_data *fuelgauge, |
| int soc) |
| { |
| u8 data[2]; |
| |
| /* 1. Set max77823 alert configuration. */ |
| max77823_alert_init(fuelgauge); |
| |
| if (max77823_read_reg(fuelgauge->i2c, MAX77823_REG_CONFIG, data) |
| < 0) |
| return -1; |
| |
| /*Enable Alert (Aen = 1) */ |
| data[0] |= (0x1 << 2); |
| |
| max77823_write_reg(fuelgauge, MAX77823_REG_CONFIG, data); |
| |
| pr_debug("%s: config_reg(%02x%02x) irq(%d)\n", |
| __func__, data[1], data[0], fuelgauge->pdata->fg_irq); |
| |
| return true; |
| } |
| |
| bool max77823_fg_is_fuelalerted(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| return max77823_check_status(fuelgauge); |
| } |
| |
| bool max77823_fg_fuelalert_process(void *irq_data, bool is_fuel_alerted) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = irq_data; |
| u8 data[2]; |
| |
| /* update SOC */ |
| /* max77823_get_soc(fuelgauge); */ |
| |
| if (is_fuel_alerted) { |
| if (max77823_read_reg(fuelgauge->i2c, |
| MAX77823_REG_CONFIG, data) < 0) |
| return false; |
| |
| data[1] |= (0x1 << 3); |
| |
| max77823_write_reg(fuelgauge->i2c, |
| MAX77823_REG_CONFIG, data); |
| |
| pr_info("%s: Fuel-alert Alerted!! (%02x%02x)\n", |
| __func__, data[1], data[0]); |
| } else { |
| if (max77823_read_reg(fuelgauge->i2c, |
| MAX77823_REG_CONFIG, data) |
| < 0) |
| return false; |
| |
| data[1] &= (~(0x1 << 3)); |
| |
| max77823_write_reg(fuelgauge->i2c, |
| MAX77823_REG_CONFIG, data); |
| |
| pr_info("%s: Fuel-alert Released!! (%02x%02x)\n", |
| __func__, data[1], data[0]); |
| } |
| |
| max77823_read_reg(fuelgauge->i2c, MAX77823_REG_VCELL, data); |
| pr_debug("%s: MAX77823_REG_VCELL(%02x%02x)\n", |
| __func__, data[1], data[0]); |
| |
| max77823_read_reg(fuelgauge->i2c, MAX77823_REG_TEMPERATURE, data); |
| pr_debug("%s: MAX77823_REG_TEMPERATURE(%02x%02x)\n", |
| __func__, data[1], data[0]); |
| |
| max77823_read_reg(fuelgauge->i2c, MAX77823_REG_CONFIG, data); |
| pr_debug("%s: MAX77823_REG_CONFIG(%02x%02x)\n", |
| __func__, data[1], data[0]); |
| |
| max77823_read_reg(fuelgauge->i2c, MAX77823_REG_VFOCV, data); |
| pr_debug("%s: MAX77823_REG_VFOCV(%02x%02x)\n", |
| __func__, data[1], data[0]); |
| |
| max77823_read_reg(fuelgauge->i2c, MAX77823_REG_SOC_VF, data); |
| pr_debug("%s: MAX77823_REG_SOC_VF(%02x%02x)\n", |
| __func__, data[1], data[0]); |
| |
| pr_debug("%s: FUEL GAUGE IRQ (%d)\n", |
| __func__, |
| gpio_get_value(fuelgauge->pdata->fg_irq)); |
| |
| return true; |
| } |
| |
| bool max77823_fg_full_charged(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| return true; |
| } |
| #endif |
| |
| #ifdef CONFIG_FUELGAUGE_MAX77823_COULOMB_COUNTING |
| static void fg_test_print(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 average_vcell; |
| u16 w_data; |
| u32 temp; |
| u32 temp2; |
| u16 reg_data; |
| |
| if (max77823_bulk_write(fuelgauge->i2c, |
| AVR_VCELL_REG, 2, data) < 0) { |
| pr_err("%s: Failed to read VCELL\n", __func__); |
| return; |
| } |
| |
| w_data = (data[1]<<8) | data[0]; |
| |
| temp = (w_data & 0xFFF) * 78125; |
| average_vcell = temp / 1000000; |
| |
| temp = ((w_data & 0xF000) >> 4) * 78125; |
| temp2 = temp / 1000000; |
| average_vcell += (temp2 << 4); |
| |
| pr_info("%s: AVG_VCELL(%d), data(0x%04x)\n", __func__, |
| average_vcell, (data[1]<<8) | data[0]); |
| |
| reg_data = max77823_read_word(fuelgauge->i2c, FULLCAP_REG); |
| pr_info("%s: FULLCAP(%d), data(0x%04x)\n", __func__, |
| reg_data/2, reg_data); |
| |
| reg_data = max77823_read_word(fuelgauge->i2c, REMCAP_REP_REG); |
| pr_info("%s: REMCAP_REP(%d), data(0x%04x)\n", __func__, |
| reg_data/2, reg_data); |
| |
| reg_data = max77823_read_word(fuelgauge->i2c, REMCAP_MIX_REG); |
| pr_info("%s: REMCAP_MIX(%d), data(0x%04x)\n", __func__, |
| reg_data/2, reg_data); |
| |
| reg_data = max77823_read_word(fuelgauge->i2c, REMCAP_AV_REG); |
| pr_info("%s: REMCAP_AV(%d), data(0x%04x)\n", __func__, |
| reg_data/2, reg_data); |
| |
| reg_data = max77823_read_word(fuelgauge->i2c, CONFIG_REG); |
| pr_info("%s: CONFIG_REG(0x%02x), data(0x%04x)\n", __func__, |
| CONFIG_REG, reg_data); |
| |
| } |
| |
| static void fg_periodic_read(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 reg; |
| int i; |
| int data[0x10]; |
| char *str = NULL; |
| |
| str = kzalloc(sizeof(char)*1024, GFP_KERNEL); |
| if (!str) |
| return; |
| |
| for (i = 0; i < 16; i++) { |
| for (reg = 0; reg < 0x10; reg++) |
| data[reg] = max77823_read_word(fuelgauge->i2c, reg + i * 0x10); |
| |
| sprintf(str+strlen(str), |
| "%04xh,%04xh,%04xh,%04xh,%04xh,%04xh,%04xh,%04xh,", |
| data[0x00], data[0x01], data[0x02], data[0x03], |
| data[0x04], data[0x05], data[0x06], data[0x07]); |
| sprintf(str+strlen(str), |
| "%04xh,%04xh,%04xh,%04xh,%04xh,%04xh,%04xh,%04xh,", |
| data[0x08], data[0x09], data[0x0a], data[0x0b], |
| data[0x0c], data[0x0d], data[0x0e], data[0x0f]); |
| if (i == 4) |
| i = 13; |
| } |
| |
| pr_info("%s", str); |
| |
| kfree(str); |
| } |
| |
| static int fg_read_vcell(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 vcell; |
| u16 w_data; |
| u32 temp; |
| u32 temp2; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, VCELL_REG, 2, data) < 0) { |
| pr_err("%s: Failed to read VCELL\n", __func__); |
| return -1; |
| } |
| |
| w_data = (data[1]<<8) | data[0]; |
| |
| temp = (w_data & 0xFFF) * 78125; |
| vcell = temp / 1000000; |
| |
| temp = ((w_data & 0xF000) >> 4) * 78125; |
| temp2 = temp / 1000000; |
| vcell += (temp2 << 4); |
| |
| if (!(fuelgauge->info.pr_cnt % PRINT_COUNT)) |
| pr_info("%s: VCELL(%d), data(0x%04x)\n", |
| __func__, vcell, (data[1]<<8) | data[0]); |
| |
| return vcell; |
| } |
| |
| static int fg_read_vfocv(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 vfocv = 0; |
| u16 w_data; |
| u32 temp; |
| u32 temp2; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, VFOCV_REG, 2, data) < 0) { |
| pr_err("%s: Failed to read VFOCV\n", __func__); |
| return -1; |
| } |
| |
| w_data = (data[1]<<8) | data[0]; |
| |
| temp = (w_data & 0xFFF) * 78125; |
| vfocv = temp / 1000000; |
| |
| temp = ((w_data & 0xF000) >> 4) * 78125; |
| temp2 = temp / 1000000; |
| vfocv += (temp2 << 4); |
| |
| return vfocv; |
| } |
| |
| static int fg_read_avg_vcell(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 avg_vcell = 0; |
| u16 w_data; |
| u32 temp; |
| u32 temp2; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, AVR_VCELL_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read AVG_VCELL\n", __func__); |
| return -1; |
| } |
| |
| w_data = (data[1]<<8) | data[0]; |
| |
| temp = (w_data & 0xFFF) * 78125; |
| avg_vcell = temp / 1000000; |
| |
| temp = ((w_data & 0xF000) >> 4) * 78125; |
| temp2 = temp / 1000000; |
| avg_vcell += (temp2 << 4); |
| |
| return avg_vcell; |
| } |
| |
| static int fg_check_battery_present(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 status_data[2]; |
| int ret = 1; |
| |
| /* 1. Check Bst bit */ |
| if (max77823_bulk_read(fuelgauge->i2c, STATUS_REG, |
| 2, status_data) < 0) { |
| pr_err("%s: Failed to read STATUS_REG\n", __func__); |
| return 0; |
| } |
| |
| if (status_data[0] & (0x1 << 3)) { |
| pr_info("%s: addr(0x01), data(0x%04x)\n", __func__, |
| (status_data[1]<<8) | status_data[0]); |
| pr_info("%s: battery is absent!!\n", __func__); |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int fg_write_temp(struct max77823_fuelgauge_data *fuelgauge, |
| int temperature) |
| { |
| u8 data[2]; |
| |
| data[0] = (temperature%10) * 1000 / 39; |
| data[1] = temperature / 10; |
| max77823_bulk_read(fuelgauge->i2c, TEMPERATURE_REG, |
| 2, data); |
| |
| pr_debug("%s: temperature to (%d, 0x%02x%02x)\n", |
| __func__, temperature, data[1], data[0]); |
| |
| return temperature; |
| } |
| |
| static int fg_read_temp(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2] = {0, 0}; |
| int temper = 0; |
| |
| if (fg_check_battery_present(fuelgauge)) { |
| if (max77823_bulk_read(fuelgauge->i2c, |
| TEMPERATURE_REG, 2, data) < 0) { |
| pr_err("%s: Failed to read TEMPERATURE_REG\n", |
| __func__); |
| return -1; |
| } |
| |
| if (data[1]&(0x1 << 7)) { |
| temper = ((~(data[1]))&0xFF)+1; |
| temper *= (-1000); |
| temper -= ((~((int)data[0]))+1) * 39 / 10; |
| } else { |
| temper = data[1] & 0x7f; |
| temper *= 1000; |
| temper += data[0] * 39 / 10; |
| } |
| } else |
| temper = 20000; |
| |
| if (!(fuelgauge->info.pr_cnt % PRINT_COUNT)) |
| pr_info("%s: TEMPERATURE(%d), data(0x%04x)\n", |
| __func__, temper, (data[1]<<8) | data[0]); |
| |
| return temper/100; |
| } |
| |
| /* soc should be 0.1% unit */ |
| static int fg_read_vfsoc(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int soc; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, VFSOC_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read VFSOC\n", __func__); |
| return -1; |
| } |
| |
| soc = ((data[1] * 100) + (data[0] * 100 / 256)) / 10; |
| |
| return min(soc, 1000); |
| } |
| |
| /* soc should be 0.1% unit */ |
| static int fg_read_avsoc(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int soc; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, SOCAV_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read AVSOC\n", __func__); |
| return -1; |
| } |
| |
| soc = ((data[1] * 100) + (data[0] * 100 / 256)) / 10; |
| |
| return min(soc, 1000); |
| } |
| |
| /* soc should be 0.1% unit */ |
| static int fg_read_soc(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int soc; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, SOCREP_REG, 2, data) < 0) { |
| pr_err("%s: Failed to read SOCREP\n", __func__); |
| return -1; |
| } |
| |
| soc = ((data[1] * 100) + (data[0] * 100 / 256)) / 10; |
| |
| pr_debug("%s: raw capacity (%d)\n", __func__, soc); |
| |
| if (!(fuelgauge->info.pr_cnt % PRINT_COUNT)) |
| pr_debug("%s: raw capacity (%d), data(0x%04x)\n", |
| __func__, soc, (data[1]<<8) | data[0]); |
| |
| return min(soc, 1000); |
| } |
| |
| /* soc should be 0.01% unit */ |
| static int fg_read_rawsoc(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int soc; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, SOCREP_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read SOCREP\n", __func__); |
| return -1; |
| } |
| |
| soc = (data[1] * 100) + (data[0] * 100 / 256); |
| |
| pr_debug("%s: raw capacity (0.01%%) (%d)\n", |
| __func__, soc); |
| |
| if (!(fuelgauge->info.pr_cnt % PRINT_COUNT)) |
| pr_debug("%s: raw capacity (%d), data(0x%04x)\n", |
| __func__, soc, (data[1]<<8) | data[0]); |
| |
| return min(soc, 10000); |
| } |
| |
| static int fg_read_fullcap(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int ret; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, FULLCAP_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read FULLCAP\n", __func__); |
| return -1; |
| } |
| |
| ret = (data[1] << 8) + data[0]; |
| |
| return ret; |
| } |
| |
| static int fg_read_mixcap(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int ret; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, REMCAP_MIX_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read REMCAP_MIX_REG\n", |
| __func__); |
| return -1; |
| } |
| |
| ret = (data[1] << 8) + data[0]; |
| |
| return ret; |
| } |
| |
| static int fg_read_avcap(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int ret; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, REMCAP_AV_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read REMCAP_AV_REG\n", |
| __func__); |
| return -1; |
| } |
| |
| ret = (data[1] << 8) + data[0]; |
| |
| return ret; |
| } |
| |
| static int fg_read_repcap(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int ret; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, REMCAP_REP_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read REMCAP_REP_REG\n", |
| __func__); |
| return -1; |
| } |
| |
| ret = (data[1] << 8) + data[0]; |
| |
| return ret; |
| } |
| |
| static int fg_read_current(struct max77823_fuelgauge_data *fuelgauge, int unit) |
| { |
| u8 data1[2], data2[2]; |
| u32 temp, sign; |
| s32 i_current; |
| s32 avg_current; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, CURRENT_REG, |
| 2, data1) < 0) { |
| pr_err("%s: Failed to read CURRENT\n", __func__); |
| return -1; |
| } |
| |
| if (max77823_bulk_read(fuelgauge->i2c, AVG_CURRENT_REG, |
| 2, data2) < 0) { |
| pr_err("%s: Failed to read AVERAGE CURRENT\n", __func__); |
| return -1; |
| } |
| |
| temp = ((data1[1]<<8) | data1[0]) & 0xFFFF; |
| if (temp & (0x1 << 15)) { |
| sign = NEGATIVE; |
| temp = (~temp & 0xFFFF) + 1; |
| } else |
| sign = POSITIVE; |
| |
| /* 1.5625uV/0.01Ohm(Rsense) = 156.25uA */ |
| switch (unit) { |
| case SEC_BATTEY_CURRENT_UA: |
| i_current = temp * 15625 / 100; |
| break; |
| case SEC_BATTEY_CURRENT_MA: |
| default: |
| i_current = temp * 15625 / 100000; |
| } |
| |
| if (sign) |
| i_current *= -1; |
| |
| temp = ((data2[1]<<8) | data2[0]) & 0xFFFF; |
| if (temp & (0x1 << 15)) { |
| sign = NEGATIVE; |
| temp = (~temp & 0xFFFF) + 1; |
| } else |
| sign = POSITIVE; |
| |
| /* 1.5625uV/0.01Ohm(Rsense) = 156.25uA */ |
| avg_current = temp * 15625 / 100000; |
| if (sign) |
| avg_current *= -1; |
| |
| if (!(fuelgauge->info.pr_cnt++ % PRINT_COUNT)) { |
| fg_test_print(fuelgauge); |
| pr_info("%s: CURRENT(%dmA), AVG_CURRENT(%dmA)\n", |
| __func__, i_current, avg_current); |
| fuelgauge->info.pr_cnt = 1; |
| /* Read max77823's all registers every 5 minute. */ |
| fg_periodic_read(fuelgauge); |
| } |
| |
| return i_current; |
| } |
| |
| static int fg_read_avg_current(struct max77823_fuelgauge_data *fuelgauge, int unit) |
| { |
| u8 data2[2]; |
| u32 temp, sign; |
| s32 avg_current; |
| |
| if (max77823_bulk_read(fuelgauge->i2c, AVG_CURRENT_REG, |
| 2, data2) < 0) { |
| pr_err("%s: Failed to read AVERAGE CURRENT\n", |
| __func__); |
| return -1; |
| } |
| |
| temp = ((data2[1]<<8) | data2[0]) & 0xFFFF; |
| if (temp & (0x1 << 15)) { |
| sign = NEGATIVE; |
| temp = (~temp & 0xFFFF) + 1; |
| } else |
| sign = POSITIVE; |
| |
| /* 1.5625uV/0.01Ohm(Rsense) = 156.25uA */ |
| switch (unit) { |
| case SEC_BATTEY_CURRENT_UA: |
| avg_current = temp * 15625 / 100; |
| break; |
| case SEC_BATTEY_CURRENT_MA: |
| default: |
| avg_current = temp * 15625 / 100000; |
| } |
| |
| if (sign) |
| avg_current *= -1; |
| |
| return avg_current; |
| } |
| |
| int fg_reset_soc(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| int vfocv, fullcap; |
| |
| /* delay for current stablization */ |
| msleep(500); |
| |
| pr_info("%s: Before quick-start - VCELL(%d), VFOCV(%d), VfSOC(%d), RepSOC(%d)\n", |
| __func__, fg_read_vcell(fuelgauge), fg_read_vfocv(fuelgauge), |
| fg_read_vfsoc(fuelgauge), fg_read_soc(fuelgauge)); |
| pr_info("%s: Before quick-start - current(%d), avg current(%d)\n", |
| __func__, fg_read_current(fuelgauge, SEC_BATTEY_CURRENT_MA), |
| fg_read_avg_current(fuelgauge, SEC_BATTEY_CURRENT_MA)); |
| |
| if (fuelgauge->pdata->check_jig_status || |
| !fuelgauge->pdata->check_jig_status()) { |
| pr_info("%s : Return by No JIG_ON signal\n", __func__); |
| return 0; |
| } |
| |
| max77823_write_word(fuelgauge->i2c, CYCLES_REG, 0); |
| |
| if (max77823_bulk_read(fuelgauge->i2c, MISCCFG_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to read MiscCFG\n", __func__); |
| return -1; |
| } |
| |
| data[1] |= (0x1 << 2); |
| if (max77823_bulk_write(fuelgauge->i2c, MISCCFG_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to write MiscCFG\n", __func__); |
| return -1; |
| } |
| |
| msleep(250); |
| max77823_write_word(fuelgauge->i2c, FULLCAP_REG, |
| fuelgauge->battery_data->Capacity); |
| msleep(500); |
| |
| pr_info("%s: After quick-start - VCELL(%d), VFOCV(%d), VfSOC(%d), RepSOC(%d)\n", |
| __func__, fg_read_vcell(fuelgauge), fg_read_vfocv(fuelgauge), |
| fg_read_vfsoc(fuelgauge), fg_read_soc(fuelgauge)); |
| pr_info("%s: After quick-start - current(%d), avg current(%d)\n", |
| __func__, fg_read_current(fuelgauge, SEC_BATTEY_CURRENT_MA), |
| fg_read_avg_current(fuelgauge, SEC_BATTEY_CURRENT_MA)); |
| |
| max77823_write_word(fuelgauge->i2c, CYCLES_REG, 0x00a0); |
| |
| /* P8 is not turned off by Quickstart @3.4V |
| * (It's not a problem, depend on mode data) |
| * Power off for factory test(File system, etc..) */ |
| vfocv = fg_read_vfocv(fuelgauge); |
| if (vfocv < POWER_OFF_VOLTAGE_LOW_MARGIN) { |
| pr_info("%s: Power off condition(%d)\n", __func__, vfocv); |
| |
| fullcap = max77823_read_word(fuelgauge->i2c, FULLCAP_REG); |
| |
| /* FullCAP * 0.009 */ |
| max77823_write_word(fuelgauge->i2c, REMCAP_REP_REG, |
| (u16)(fullcap * 9 / 1000)); |
| msleep(200); |
| pr_info("%s: new soc=%d, vfocv=%d\n", __func__, |
| fg_read_soc(fuelgauge), vfocv); |
| } |
| |
| pr_info("%s: Additional step - VfOCV(%d), VfSOC(%d), RepSOC(%d)\n", |
| __func__, fg_read_vfocv(fuelgauge), |
| fg_read_vfsoc(fuelgauge), fg_read_soc(fuelgauge)); |
| |
| return 0; |
| } |
| |
| int fg_reset_capacity_by_jig_connection(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| |
| pr_info("%s: DesignCap = Capacity - 1 (Jig Connection)\n", __func__); |
| |
| return max77823_write_word(fuelgauge->i2c, DESIGNCAP_REG, |
| fuelgauge->battery_data->Capacity-1); |
| } |
| |
| int fg_adjust_capacity(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| |
| data[0] = 0; |
| data[1] = 0; |
| |
| /* 1. Write RemCapREP(05h)=0; */ |
| if (max77823_bulk_write(fuelgauge->i2c, REMCAP_REP_REG, |
| 2, data) < 0) { |
| pr_err("%s: Failed to write RemCap_REP\n", __func__); |
| return -1; |
| } |
| msleep(200); |
| |
| pr_info("%s: After adjust - RepSOC(%d)\n", __func__, |
| fg_read_soc(fuelgauge)); |
| |
| return 0; |
| } |
| |
| void fg_low_batt_compensation(struct max77823_fuelgauge_data *fuelgauge, |
| u32 level) |
| { |
| int read_val; |
| u32 temp; |
| |
| pr_info("%s: Adjust SOCrep to %d!!\n", __func__, level); |
| |
| read_val = max77823_read_word(fuelgauge->i2c, FULLCAP_REG); |
| /* RemCapREP (05h) = FullCap(10h) x 0.0090 */ |
| temp = read_val * (level*90) / 10000; |
| max77823_write_word(fuelgauge->i2c, REMCAP_REP_REG, |
| (u16)temp); |
| } |
| |
| static int fg_check_status_reg(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| u8 status_data[2]; |
| int ret = 0; |
| |
| /* 1. Check Smn was generatedread */ |
| if (max77823_bulk_read(fuelgauge->i2c, STATUS_REG, |
| 2, status_data) < 0) { |
| pr_err("%s: Failed to read STATUS_REG\n", __func__); |
| return -1; |
| } |
| pr_info("%s: addr(0x00), data(0x%04x)\n", __func__, |
| (status_data[1]<<8) | status_data[0]); |
| |
| if (status_data[1] & (0x1 << 2)) |
| ret = 1; |
| |
| /* 2. clear Status reg */ |
| status_data[1] = 0; |
| if (max77823_bulk_write(fuelgauge->i2c, STATUS_REG, |
| 2, status_data) < 0) { |
| pr_info("%s: Failed to write STATUS_REG\n", __func__); |
| return -1; |
| } |
| |
| return ret; |
| } |
| |
| int get_fuelgauge_value(struct max77823_fuelgauge_data *fuelgauge, int data) |
| { |
| int ret; |
| |
| switch (data) { |
| case FG_LEVEL: |
| ret = fg_read_soc(fuelgauge); |
| break; |
| |
| case FG_TEMPERATURE: |
| ret = fg_read_temp(fuelgauge); |
| break; |
| |
| case FG_VOLTAGE: |
| ret = fg_read_vcell(fuelgauge); |
| break; |
| |
| case FG_CURRENT: |
| ret = fg_read_current(fuelgauge, SEC_BATTEY_CURRENT_MA); |
| break; |
| |
| case FG_CURRENT_AVG: |
| ret = fg_read_avg_current(fuelgauge, SEC_BATTEY_CURRENT_MA); |
| break; |
| |
| case FG_CHECK_STATUS: |
| ret = fg_check_status_reg(fuelgauge); |
| break; |
| |
| case FG_RAW_SOC: |
| ret = fg_read_rawsoc(fuelgauge); |
| break; |
| |
| case FG_VF_SOC: |
| ret = fg_read_vfsoc(fuelgauge); |
| break; |
| |
| case FG_AV_SOC: |
| ret = fg_read_avsoc(fuelgauge); |
| break; |
| |
| case FG_FULLCAP: |
| ret = fg_read_fullcap(fuelgauge); |
| break; |
| |
| case FG_MIXCAP: |
| ret = fg_read_mixcap(fuelgauge); |
| break; |
| |
| case FG_AVCAP: |
| ret = fg_read_avcap(fuelgauge); |
| break; |
| |
| case FG_REPCAP: |
| ret = fg_read_repcap(fuelgauge); |
| break; |
| |
| default: |
| ret = -1; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| int max77823_alert_init(struct max77823_fuelgauge_data *fuelgauge, int soc) |
| { |
| u8 misccgf_data[2]; |
| u8 salrt_data[2]; |
| u8 config_data[2]; |
| u8 valrt_data[2]; |
| u8 talrt_data[2]; |
| u16 read_data = 0; |
| |
| /* Using RepSOC */ |
| if (max77823_bulk_read(fuelgauge->i2c, MISCCFG_REG, 2, |
| misccgf_data) < 0) { |
| pr_err("%s: Failed to read MISCCFG_REG\n", __func__); |
| return -1; |
| } |
| misccgf_data[0] = misccgf_data[0] & ~(0x03); |
| |
| if (max77823_bulk_write(fuelgauge->i2c, MISCCFG_REG, |
| 2, misccgf_data) < 0) { |
| pr_info("%s: Failed to write MISCCFG_REG\n", __func__); |
| return -1; |
| } |
| |
| /* SALRT Threshold setting */ |
| salrt_data[1] = 0xff; |
| salrt_data[0] = soc; |
| if (max77823_bulk_write(fuelgauge->i2c, SALRT_THRESHOLD_REG, |
| 2, salrt_data) < 0) { |
| pr_info("%s: Failed to write SALRT_THRESHOLD_REG\n", __func__); |
| return -1; |
| } |
| |
| /* Reset VALRT Threshold setting (disable) */ |
| valrt_data[1] = 0xFF; |
| valrt_data[0] = 0x00; |
| if (max77823_bulk_write(fuelgauge->i2c, VALRT_THRESHOLD_REG, |
| 2, valrt_data) < 0) { |
| pr_info("%s: Failed to write VALRT_THRESHOLD_REG\n", __func__); |
| return -1; |
| } |
| |
| read_data = max77823_read_word(fuelgauge->i2c, (u8)VALRT_THRESHOLD_REG); |
| if (read_data != 0xff00) |
| pr_err("%s: VALRT_THRESHOLD_REG is not valid (0x%x)\n", |
| __func__, read_data); |
| |
| /* Reset TALRT Threshold setting (disable) */ |
| talrt_data[1] = 0x7F; |
| talrt_data[0] = 0x80; |
| if (max77823_bulk_write(fuelgauge->i2c, TALRT_THRESHOLD_REG, |
| 2, talrt_data) < 0) { |
| pr_info("%s: Failed to write TALRT_THRESHOLD_REG\n", __func__); |
| return -1; |
| } |
| |
| read_data = max77823_read_word(fuelgauge->i2c, (u8)TALRT_THRESHOLD_REG); |
| if (read_data != 0x7f80) |
| pr_err("%s: TALRT_THRESHOLD_REG is not valid (0x%x)\n", |
| __func__, read_data); |
| |
| /*mdelay(100);*/ |
| |
| /* Enable SOC alerts */ |
| if (max77823_bulk_read(fuelgauge->i2c, CONFIG_REG, |
| 2, config_data) < 0) { |
| pr_err("%s: Failed to read CONFIG_REG\n", __func__); |
| return -1; |
| } |
| config_data[0] = config_data[0] | (0x1 << 2); |
| |
| if (max77823_bulk_write(fuelgauge->i2c, CONFIG_REG, |
| 2, config_data) < 0) { |
| pr_info("%s: Failed to write CONFIG_REG\n", __func__); |
| return -1; |
| } |
| |
| pr_info("[%s] SALRT(0x%x%x), VALRT(0x%x%x), CONFIG(0x%x%x)\n", |
| __func__, |
| salrt_data[1], salrt_data[0], |
| valrt_data[1], valrt_data[0], |
| config_data[1], config_data[0]); |
| |
| return 1; |
| } |
| |
| void fg_fullcharged_compensation(struct max77823_fuelgauge_data *fuelgauge, |
| u32 is_recharging, bool pre_update) |
| { |
| static int new_fullcap_data; |
| |
| pr_info("%s: is_recharging(%d), pre_update(%d)\n", |
| __func__, is_recharging, pre_update); |
| |
| new_fullcap_data = |
| max77823_read_word(fuelgauge->i2c, FULLCAP_REG); |
| if (new_fullcap_data < 0) |
| new_fullcap_data = fuelgauge->battery_data->Capacity; |
| |
| /* compare with initial capacity */ |
| if (new_fullcap_data > |
| (fuelgauge->battery_data->Capacity * 110 / 100)) { |
| pr_info("%s: [Case 1] capacity = 0x%04x, NewFullCap = 0x%04x\n", |
| __func__, fuelgauge->battery_data->Capacity, |
| new_fullcap_data); |
| |
| new_fullcap_data = |
| (fuelgauge->battery_data->Capacity * 110) / 100; |
| |
| max77823_write_word(fuelgauge->i2c, REMCAP_REP_REG, |
| (u16)(new_fullcap_data)); |
| max77823_write_word(fuelgauge->i2c, FULLCAP_REG, |
| (u16)(new_fullcap_data)); |
| } else if (new_fullcap_data < |
| (fuelgauge->battery_data->Capacity * 50 / 100)) { |
| pr_info("%s: [Case 5] capacity = 0x%04x, NewFullCap = 0x%04x\n", |
| __func__, fuelgauge->battery_data->Capacity, |
| new_fullcap_data); |
| |
| new_fullcap_data = |
| (fuelgauge->battery_data->Capacity * 50) / 100; |
| |
| max77823_write_word(fuelgauge->i2c, REMCAP_REP_REG, |
| (u16)(new_fullcap_data)); |
| max77823_write_word(fuelgauge->i2c, FULLCAP_REG, |
| (u16)(new_fullcap_data)); |
| } else { |
| /* compare with previous capacity */ |
| if (new_fullcap_data > |
| (fuelgauge->info.previous_fullcap * 110 / 100)) { |
| pr_info("%s: [Case 2] previous_fullcap = 0x%04x, NewFullCap = 0x%04x\n", |
| __func__, fuelgauge->info.previous_fullcap, |
| new_fullcap_data); |
| |
| new_fullcap_data = |
| (fuelgauge->info.previous_fullcap * 110) / 100; |
| |
| max77823_write_word(fuelgauge->i2c, REMCAP_REP_REG, |
| (u16)(new_fullcap_data)); |
| max77823_write_word(fuelgauge->i2c, FULLCAP_REG, |
| (u16)(new_fullcap_data)); |
| } else if (new_fullcap_data < |
| (fuelgauge->info.previous_fullcap * 90 / 100)) { |
| pr_info("%s: [Case 3] previous_fullcap = 0x%04x, NewFullCap = 0x%04x\n", |
| __func__, fuelgauge->info.previous_fullcap, |
| new_fullcap_data); |
| |
| new_fullcap_data = |
| (fuelgauge->info.previous_fullcap * 90) / 100; |
| |
| max77823_write_word(fuelgauge->i2c, REMCAP_REP_REG, |
| (u16)(new_fullcap_data)); |
| max77823_write_word(fuelgauge->i2c, FULLCAP_REG, |
| (u16)(new_fullcap_data)); |
| } else { |
| pr_info("%s: [Case 4] previous_fullcap = 0x%04x, NewFullCap = 0x%04x\n", |
| __func__, fuelgauge->info.previous_fullcap, |
| new_fullcap_data); |
| } |
| } |
| |
| /* 4. Write RepSOC(06h)=100%; */ |
| max77823_write_word(fuelgauge->i2c, SOCREP_REG, (u16)(0x64 << 8)); |
| |
| /* 5. Write MixSOC(0Dh)=100%; */ |
| max77823_write_word(fuelgauge->i2c, SOCMIX_REG, (u16)(0x64 << 8)); |
| |
| /* 6. Write AVSOC(0Eh)=100%; */ |
| max77823_write_word(fuelgauge->i2c, SOCAV_REG, (u16)(0x64 << 8)); |
| |
| /* if pre_update case, skip updating PrevFullCAP value. */ |
| if (!pre_update) |
| fuelgauge->info.previous_fullcap = |
| max77823_read_word(fuelgauge->i2c, FULLCAP_REG); |
| |
| pr_info("%s: (A) FullCap = 0x%04x, RemCap = 0x%04x\n", __func__, |
| max77823_read_word(fuelgauge->i2c, FULLCAP_REG), |
| max77823_read_word(fuelgauge->i2c, REMCAP_REP_REG)); |
| |
| fg_periodic_read(fuelgauge); |
| } |
| |
| void fg_check_vf_fullcap_range(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| static int new_vffullcap; |
| bool is_vffullcap_changed = true; |
| |
| if (fuelgauge->pdata->check_jig_status && |
| fuelgauge->pdata->check_jig_status()) |
| fg_reset_capacity_by_jig_connection(fuelgauge); |
| |
| new_vffullcap = max77823_read_word(fuelgauge->i2c, FULLCAP_NOM_REG); |
| if (new_vffullcap < 0) |
| new_vffullcap = fuelgauge->battery_data->Capacity; |
| |
| pr_info("[%s]vffullcap = %d\n", __func__, new_vffullcap); |
| |
| /* compare with initial capacity */ |
| if (new_vffullcap > |
| (fuelgauge->battery_data->Capacity * 110 / 100)) { |
| pr_info("%s: [Case 1] capacity = 0x%04x, NewVfFullCap = 0x%04x\n", |
| __func__, fuelgauge->battery_data->Capacity, |
| new_vffullcap); |
| |
| new_vffullcap = |
| (fuelgauge->battery_data->Capacity * 110) / 100; |
| |
| max77823_write_word(fuelgauge->i2c, DQACC_REG, |
| (u16)(new_vffullcap / 4)); |
| max77823_write_word(fuelgauge->i2c, DPACC_REG, (u16)0x3200); |
| } else if (new_vffullcap < |
| (fuelgauge->battery_data->Capacity * 50 / 100)) { |
| pr_info("%s: [Case 5] capacity = 0x%04x, NewVfFullCap = 0x%04x\n", |
| __func__, fuelgauge->battery_data->Capacity, |
| new_vffullcap); |
| |
| new_vffullcap = |
| (fuelgauge->battery_data->Capacity * 50) / 100; |
| |
| max77823_write_word(fuelgauge->i2c, DQACC_REG, |
| (u16)(new_vffullcap / 4)); |
| max77823_write_word(fuelgauge->i2c, DPACC_REG, |
| (u16)0x3200); |
| } else { |
| /* compare with previous capacity */ |
| if (new_vffullcap > |
| (fuelgauge->info.previous_vffullcap * 110 / 100)) { |
| pr_info("%s: [Case 2] previous_vffullcap = 0x%04x, NewVfFullCap = 0x%04x\n", |
| __func__, fuelgauge->info.previous_vffullcap, |
| new_vffullcap); |
| |
| new_vffullcap = |
| (fuelgauge->info.previous_vffullcap * 110) / |
| 100; |
| |
| max77823_write_word(fuelgauge->i2c, DQACC_REG, |
| (u16)(new_vffullcap / 4)); |
| max77823_write_word(fuelgauge->i2c, DPACC_REG, |
| (u16)0x3200); |
| } else if (new_vffullcap < |
| (fuelgauge->info.previous_vffullcap * 90 / 100)) { |
| pr_info("%s: [Case 3] previous_vffullcap = 0x%04x, NewVfFullCap = 0x%04x\n", |
| __func__, fuelgauge->info.previous_vffullcap, |
| new_vffullcap); |
| |
| new_vffullcap = |
| (fuelgauge->info.previous_vffullcap * 90) / 100; |
| |
| max77823_write_word(fuelgauge->i2c, DQACC_REG, |
| (u16)(new_vffullcap / 4)); |
| max77823_write_word(fuelgauge->i2c, DPACC_REG, |
| (u16)0x3200); |
| } else { |
| pr_info("%s: [Case 4] previous_vffullcap = 0x%04x, NewVfFullCap = 0x%04x\n", |
| __func__, fuelgauge->info.previous_vffullcap, |
| new_vffullcap); |
| is_vffullcap_changed = false; |
| } |
| } |
| |
| /* delay for register setting (dQacc, dPacc) */ |
| if (is_vffullcap_changed) |
| msleep(300); |
| |
| fuelgauge->info.previous_vffullcap = |
| max77823_read_word(fuelgauge->i2c, FULLCAP_NOM_REG); |
| |
| if (is_vffullcap_changed) |
| pr_info("%s : VfFullCap(0x%04x), dQacc(0x%04x), dPacc(0x%04x)\n", |
| __func__, |
| max77823_read_word(fuelgauge->i2c, FULLCAP_NOM_REG), |
| max77823_read_word(fuelgauge->i2c, DQACC_REG), |
| max77823_read_word(fuelgauge->i2c, DPACC_REG)); |
| |
| } |
| |
| void fg_set_full_charged(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| pr_info("[FG_Set_Full] (B) FullCAP(%d), RemCAP(%d)\n", |
| (max77823_read_word(fuelgauge->i2c, FULLCAP_REG)/2), |
| (max77823_read_word(fuelgauge->i2c, REMCAP_REP_REG)/2)); |
| |
| max77823_write_word(fuelgauge->i2c, FULLCAP_REG, |
| (u16)max77823_read_word(fuelgauge->i2c, REMCAP_REP_REG)); |
| |
| pr_info("[FG_Set_Full] (A) FullCAP(%d), RemCAP(%d)\n", |
| (max77823_read_word(fuelgauge->i2c, FULLCAP_REG)/2), |
| (max77823_read_word(fuelgauge->i2c, REMCAP_REP_REG)/2)); |
| } |
| |
| static void display_low_batt_comp_cnt(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| pr_info("[%d, %d], [%d, %d], ", |
| fuelgauge->info.low_batt_comp_cnt[0][0], |
| fuelgauge->info.low_batt_comp_cnt[0][1], |
| fuelgauge->info.low_batt_comp_cnt[1][0], |
| fuelgauge->info.low_batt_comp_cnt[1][1]); |
| pr_info("[%d, %d], [%d, %d], [%d, %d]\n", |
| fuelgauge->info.low_batt_comp_cnt[2][0], |
| fuelgauge->info.low_batt_comp_cnt[2][1], |
| fuelgauge->info.low_batt_comp_cnt[3][0], |
| fuelgauge->info.low_batt_comp_cnt[3][1], |
| fuelgauge->info.low_batt_comp_cnt[4][0], |
| fuelgauge->info.low_batt_comp_cnt[4][1]); |
| } |
| |
| static void add_low_batt_comp_cnt(struct max77823_fuelgauge_data *fuelgauge, |
| int range, int level) |
| { |
| int i; |
| int j; |
| |
| /* Increase the requested count value, and reset others. */ |
| fuelgauge->info.low_batt_comp_cnt[range-1][level/2]++; |
| |
| for (i = 0; i < LOW_BATT_COMP_RANGE_NUM; i++) { |
| for (j = 0; j < LOW_BATT_COMP_LEVEL_NUM; j++) { |
| if (i == range-1 && j == level/2) |
| continue; |
| else |
| fuelgauge->info.low_batt_comp_cnt[i][j] = 0; |
| } |
| } |
| } |
| |
| void prevent_early_poweroff(struct max77823_fuelgauge_data *fuelgauge, |
| int vcell, int *fg_soc) |
| { |
| int soc = 0; |
| int read_val; |
| |
| soc = fg_read_soc(fuelgauge); |
| |
| /* No need to write REMCAP_REP in below normal cases */ |
| if (soc > POWER_OFF_SOC_HIGH_MARGIN || |
| vcell > fuelgauge->battery_data->low_battery_comp_voltage) |
| return; |
| |
| pr_info("%s: soc=%d, vcell=%d\n", __func__, soc, vcell); |
| |
| if (vcell > POWER_OFF_VOLTAGE_HIGH_MARGIN) { |
| read_val = max77823_read_word(fuelgauge->i2c, FULLCAP_REG); |
| /* FullCAP * 0.013 */ |
| max77823_write_word(fuelgauge->i2c, REMCAP_REP_REG, |
| (u16)(read_val * 13 / 1000)); |
| msleep(200); |
| *fg_soc = fg_read_soc(fuelgauge); |
| pr_info("%s: new soc=%d, vcell=%d\n", __func__, *fg_soc, vcell); |
| } |
| } |
| |
| void reset_low_batt_comp_cnt(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| memset(fuelgauge->info.low_batt_comp_cnt, 0, |
| sizeof(fuelgauge->info.low_batt_comp_cnt)); |
| } |
| |
| static int check_low_batt_comp_condition( |
| struct max77823_fuelgauge_data *fuelgauge, |
| int *nLevel) |
| { |
| int i; |
| int j; |
| int ret = 0; |
| |
| for (i = 0; i < LOW_BATT_COMP_RANGE_NUM; i++) { |
| for (j = 0; j < LOW_BATT_COMP_LEVEL_NUM; j++) { |
| if (fuelgauge->info.low_batt_comp_cnt[i][j] >= |
| MAX_LOW_BATT_CHECK_CNT) { |
| display_low_batt_comp_cnt(fuelgauge); |
| ret = 1; |
| *nLevel = j*2 + 1; |
| break; |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int get_low_batt_threshold(struct max77823_fuelgauge_data *fuelgauge, |
| int range, int nCurrent, int level) |
| { |
| int ret = 0; |
| |
| ret = fuelgauge->battery_data->low_battery_table[range][OFFSET] + |
| ((nCurrent * |
| fuelgauge->battery_data->low_battery_table[range][SLOPE]) / |
| 1000); |
| |
| return ret; |
| } |
| |
| int low_batt_compensation(struct max77823_fuelgauge_data *fuelgauge, |
| int fg_soc, int fg_vcell, int fg_current) |
| { |
| int fg_avg_current = 0; |
| int fg_min_current = 0; |
| int new_level = 0; |
| int i, table_size; |
| |
| /* Not charging, Under low battery comp voltage */ |
| if (fg_vcell <= fuelgauge->battery_data->low_battery_comp_voltage) { |
| fg_avg_current = fg_read_avg_current(fuelgauge, |
| SEC_BATTEY_CURRENT_MA); |
| fg_min_current = min(fg_avg_current, fg_current); |
| |
| table_size = |
| sizeof(fuelgauge->battery_data->low_battery_table) / |
| (sizeof(s16)*TABLE_MAX); |
| |
| for (i = 1; i < CURRENT_RANGE_MAX_NUM; i++) { |
| if ((fg_min_current >= fuelgauge->battery_data-> |
| low_battery_table[i-1][RANGE]) && |
| (fg_min_current < fuelgauge->battery_data-> |
| low_battery_table[i][RANGE])) { |
| if (fg_soc >= 10 && fg_vcell < |
| get_low_batt_threshold(fuelgauge, |
| i, fg_min_current, 1)) { |
| add_low_batt_comp_cnt( |
| fuelgauge, i, 1); |
| } else { |
| reset_low_batt_comp_cnt(fuelgauge); |
| } |
| } |
| } |
| |
| if (check_low_batt_comp_condition(fuelgauge, &new_level)) { |
| fg_low_batt_compensation(fuelgauge, new_level); |
| reset_low_batt_comp_cnt(fuelgauge); |
| |
| /* Do not update soc right after |
| * low battery compensation |
| * to prevent from powering-off suddenly |
| */ |
| pr_info("%s: SOC is set to %d by low compensation!!\n", |
| __func__, fg_read_soc(fuelgauge)); |
| } |
| } |
| |
| /* Prevent power off over 3500mV */ |
| prevent_early_poweroff(fuelgauge, fg_vcell, &fg_soc); |
| |
| return fg_soc; |
| } |
| |
| static bool is_booted_in_low_battery(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| int fg_vcell = get_fuelgauge_value(fuelgauge, FG_VOLTAGE); |
| int fg_current = get_fuelgauge_value(fuelgauge, FG_CURRENT); |
| int threshold = 0; |
| |
| threshold = 3300 + ((fg_current * 17) / 100); |
| |
| if (fg_vcell <= threshold) |
| return true; |
| else |
| return false; |
| } |
| |
| static bool fuelgauge_recovery_handler(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| int current_soc; |
| int avsoc; |
| int temperature; |
| |
| if (fuelgauge->info.soc >= LOW_BATTERY_SOC_REDUCE_UNIT) { |
| pr_err("%s: Reduce the Reported SOC by 1%%\n", |
| __func__); |
| current_soc = |
| get_fuelgauge_value(fuelgauge, FG_LEVEL) / 10; |
| |
| if (current_soc) { |
| pr_info("%s: Returning to Normal discharge path\n", |
| __func__); |
| pr_info("%s: Actual SOC(%d) non-zero\n", |
| __func__, current_soc); |
| fuelgauge->info.is_low_batt_alarm = false; |
| } else { |
| temperature = |
| get_fuelgauge_value(fuelgauge, FG_TEMPERATURE); |
| avsoc = |
| get_fuelgauge_value(fuelgauge, FG_AV_SOC); |
| |
| if ((fuelgauge->info.soc > avsoc) || |
| (temperature < 0)) { |
| fuelgauge->info.soc -= |
| LOW_BATTERY_SOC_REDUCE_UNIT; |
| pr_err("%s: New Reduced RepSOC (%d)\n", |
| __func__, fuelgauge->info.soc); |
| } else |
| pr_info("%s: Waiting for recovery (AvSOC:%d)\n", |
| __func__, avsoc); |
| } |
| } |
| |
| return fuelgauge->info.is_low_batt_alarm; |
| } |
| |
| static int get_fuelgauge_soc(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| union power_supply_propval value; |
| int fg_soc = 0; |
| int fg_vfsoc; |
| int fg_vcell; |
| int fg_current; |
| int avg_current; |
| ktime_t current_time; |
| struct timespec ts; |
| int fullcap_check_interval; |
| |
| if (fuelgauge->info.is_low_batt_alarm) |
| if (fuelgauge_recovery_handler(fuelgauge)) { |
| fg_soc = fuelgauge->info.soc; |
| goto return_soc; |
| } |
| |
| #if defined(ANDROID_ALARM_ACTIVATED) |
| current_time = alarm_get_elapsed_realtime(); |
| ts = ktime_to_timespec(current_time); |
| #else |
| current_time = ktime_get_boottime(); |
| ts = ktime_to_timespec(current_time); |
| #endif |
| |
| /* check fullcap range */ |
| fullcap_check_interval = |
| (ts.tv_sec - fuelgauge->info.fullcap_check_interval); |
| if (fullcap_check_interval > |
| VFFULLCAP_CHECK_INTERVAL) { |
| pr_info("%s: check fullcap range (interval:%d)\n", |
| __func__, fullcap_check_interval); |
| fg_check_vf_fullcap_range(fuelgauge); |
| fuelgauge->info.fullcap_check_interval = ts.tv_sec; |
| } |
| |
| fg_soc = get_fuelgauge_value(fuelgauge, FG_LEVEL); |
| if (fg_soc < 0) { |
| pr_info("Can't read soc!!!"); |
| fg_soc = fuelgauge->info.soc; |
| } |
| |
| if (fuelgauge->info.low_batt_boot_flag) { |
| fg_soc = 0; |
| |
| if (fuelgauge->pdata->check_cable_callback && |
| fuelgauge->pdata->check_cable_callback() != |
| POWER_SUPPLY_TYPE_BATTERY && |
| !is_booted_in_low_battery(fuelgauge)) { |
| fg_adjust_capacity(fuelgauge); |
| fuelgauge->info.low_batt_boot_flag = 0; |
| } |
| |
| if (fuelgauge->pdata->check_cable_callback && |
| fuelgauge->pdata->check_cable_callback() == |
| POWER_SUPPLY_TYPE_BATTERY) |
| fuelgauge->info.low_batt_boot_flag = 0; |
| } |
| |
| fg_vcell = get_fuelgauge_value(fuelgauge, FG_VOLTAGE); |
| fg_current = get_fuelgauge_value(fuelgauge, FG_CURRENT); |
| avg_current = get_fuelgauge_value(fuelgauge, FG_CURRENT_AVG); |
| fg_vfsoc = get_fuelgauge_value(fuelgauge, FG_VF_SOC); |
| |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_STATUS, value); |
| |
| /* Algorithm for reducing time to fully charged (from MAXIM) */ |
| if (value.intval != POWER_SUPPLY_STATUS_DISCHARGING && |
| value.intval != POWER_SUPPLY_STATUS_FULL && |
| fuelgauge->cable_type != POWER_SUPPLY_TYPE_USB && |
| /* Skip when first check after boot up */ |
| !fuelgauge->info.is_first_check && |
| (fg_vfsoc > VFSOC_FOR_FULLCAP_LEARNING && |
| (fg_current > LOW_CURRENT_FOR_FULLCAP_LEARNING && |
| fg_current < HIGH_CURRENT_FOR_FULLCAP_LEARNING) && |
| (avg_current > LOW_AVGCURRENT_FOR_FULLCAP_LEARNING && |
| avg_current < HIGH_AVGCURRENT_FOR_FULLCAP_LEARNING))) { |
| |
| if (fuelgauge->info.full_check_flag == 2) { |
| pr_info("%s: force fully charged SOC !! (%d)", |
| __func__, fuelgauge->info.full_check_flag); |
| fg_set_full_charged(fuelgauge); |
| fg_soc = get_fuelgauge_value(fuelgauge, FG_LEVEL); |
| } else if (fuelgauge->info.full_check_flag < 2) |
| pr_info("%s: full_check_flag (%d)", |
| __func__, fuelgauge->info.full_check_flag); |
| |
| /* prevent overflow */ |
| if (fuelgauge->info.full_check_flag++ > 10000) |
| fuelgauge->info.full_check_flag = 3; |
| } else |
| fuelgauge->info.full_check_flag = 0; |
| |
| /* Checks vcell level and tries to compensate SOC if needed.*/ |
| /* If jig cable is connected, then skip low batt compensation check. */ |
| if (fuelgauge->pdata->check_jig_status && |
| !fuelgauge->pdata->check_jig_status() && |
| value.intval == POWER_SUPPLY_STATUS_DISCHARGING) |
| fg_soc = low_batt_compensation( |
| fuelgauge, fg_soc, fg_vcell, fg_current); |
| |
| if (fuelgauge->info.is_first_check) |
| fuelgauge->info.is_first_check = false; |
| |
| fuelgauge->info.soc = fg_soc; |
| |
| return_soc: |
| pr_debug("%s: soc(%d), low_batt_alarm(%d)\n", |
| __func__, fuelgauge->info.soc, |
| fuelgauge->info.is_low_batt_alarm); |
| |
| return fg_soc; |
| } |
| |
| static void full_comp_work_handler(struct work_struct *work) |
| { |
| struct sec_fg_info *fg_info = |
| container_of(work, struct sec_fg_info, full_comp_work.work); |
| struct max77823_fuelgauge_data *fuelgauge = |
| container_of(fg_info, struct max77823_fuelgauge_data, info); |
| int avg_current; |
| union power_supply_propval value; |
| |
| avg_current = get_fuelgauge_value(fuelgauge, FG_CURRENT_AVG); |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_STATUS, value); |
| |
| if (avg_current >= 25) { |
| cancel_delayed_work(&fuelgauge->info.full_comp_work); |
| schedule_delayed_work(&fuelgauge->info.full_comp_work, 100); |
| } else { |
| pr_info("%s: full charge compensation start (avg_current %d)\n", |
| __func__, avg_current); |
| fg_fullcharged_compensation(fuelgauge, |
| (int)(value.intval == |
| POWER_SUPPLY_STATUS_FULL), false); |
| } |
| } |
| |
| static irqreturn_t max77823_jig_irq_thread(int irq, void *irq_data) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = irq_data; |
| |
| if (fuelgauge->pdata->check_jig_status && |
| fuelgauge->pdata->check_jig_status()) |
| fg_reset_capacity_by_jig_connection(fuelgauge); |
| else |
| pr_info("%s: jig removed\n", __func__); |
| return IRQ_HANDLED; |
| } |
| |
| bool max77823_fg_init(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| ktime_t current_time; |
| struct timespec ts; |
| u8 data[2] = {0, 0}; |
| |
| #if defined(ANDROID_ALARM_ACTIVATED) |
| current_time = alarm_get_elapsed_realtime(); |
| ts = ktime_to_timespec(current_time); |
| #else |
| current_time = ktime_get_boottime(); |
| ts = ktime_to_timespec(current_time); |
| #endif |
| |
| fuelgauge->info.fullcap_check_interval = ts.tv_sec; |
| |
| fuelgauge->info.is_low_batt_alarm = false; |
| fuelgauge->info.is_first_check = true; |
| |
| /* Init parameters to prevent wrong compensation. */ |
| fuelgauge->info.previous_fullcap = |
| max77823_read_word(fuelgauge->i2c, FULLCAP_REG); |
| fuelgauge->info.previous_vffullcap = |
| max77823_read_word(fuelgauge->i2c, FULLCAP_NOM_REG); |
| |
| if (fuelgauge->pdata->check_cable_callback && |
| (fuelgauge->pdata->check_cable_callback() != |
| POWER_SUPPLY_TYPE_BATTERY) && |
| is_booted_in_low_battery(fuelgauge)) |
| fuelgauge->info.low_batt_boot_flag = 1; |
| |
| if (fuelgauge->pdata->check_jig_status && |
| fuelgauge->pdata->check_jig_status()) |
| fg_reset_capacity_by_jig_connection(fuelgauge); |
| else { |
| if (fuelgauge->pdata->jig_irq) { |
| int ret; |
| ret = request_threaded_irq(fuelgauge->pdata->jig_irq, |
| NULL, max77823_jig_irq_thread, |
| fuelgauge->pdata->jig_irq_attr, |
| "jig-irq", fuelgauge); |
| if (ret) { |
| pr_info("%s: Failed to Reqeust IRQ\n", |
| __func__); |
| } |
| } |
| } |
| |
| INIT_DELAYED_WORK(&fuelgauge->info.full_comp_work, |
| full_comp_work_handler); |
| |
| /* NOT using FG for temperature */ |
| if (fuelgauge->pdata->thermal_source != SEC_BATTERY_THERMAL_SOURCE_FG) { |
| data[0] = 0x00; |
| data[1] = 0x21; |
| max77823_bulk_write(fuelgauge->i2c, CONFIG_REG, |
| 2, data); |
| } |
| |
| return true; |
| } |
| |
| bool max77823_fg_fuelalert_init(struct max77823_fuelgauge_data *fuelgauge, |
| int soc) |
| { |
| /* 1. Set max77823 alert configuration. */ |
| if (max77823_alert_init(fuelgauge, soc) > 0) |
| return true; |
| else |
| return false; |
| } |
| |
| bool max77823_fg_is_fuelalerted(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| if (get_fuelgauge_value(fuelgauge, FG_CHECK_STATUS) > 0) |
| return true; |
| else |
| return false; |
| } |
| |
| bool max77823_fg_fuelalert_process(void *irq_data, bool is_fuel_alerted) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = |
| (struct max77823_fuelgauge_data *)irq_data; |
| union power_supply_propval value; |
| int overcurrent_limit_in_soc; |
| int current_soc = |
| get_fuelgauge_value(fuelgauge, FG_LEVEL); |
| |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_STATUS, value); |
| if (value.intval == POWER_SUPPLY_STATUS_CHARGING) |
| return true; |
| |
| if (fuelgauge->info.soc <= STABLE_LOW_BATTERY_DIFF) |
| overcurrent_limit_in_soc = STABLE_LOW_BATTERY_DIFF_LOWBATT; |
| else |
| overcurrent_limit_in_soc = STABLE_LOW_BATTERY_DIFF; |
| |
| if (((int)fuelgauge->info.soc - current_soc) > |
| overcurrent_limit_in_soc) { |
| pr_info("%s: Abnormal Current Consumption jump by %d units\n", |
| __func__, (((int)fuelgauge->info.soc - current_soc))); |
| pr_info("%s: Last Reported SOC (%d).\n", |
| __func__, fuelgauge->info.soc); |
| |
| fuelgauge->info.is_low_batt_alarm = true; |
| |
| if (fuelgauge->info.soc >= |
| LOW_BATTERY_SOC_REDUCE_UNIT) |
| return true; |
| } |
| |
| if (value.intval == |
| POWER_SUPPLY_STATUS_DISCHARGING) { |
| pr_err("Set battery level as 0, power off.\n"); |
| fuelgauge->info.soc = 0; |
| value.intval = 0; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_CAPACITY, value); |
| } |
| |
| return true; |
| } |
| |
| bool max77823_fg_full_charged(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| union power_supply_propval value; |
| |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_STATUS, value); |
| |
| /* full charge compensation algorithm by MAXIM */ |
| fg_fullcharged_compensation(fuelgauge, |
| (int)(value.intval == POWER_SUPPLY_STATUS_FULL), true); |
| |
| cancel_delayed_work(&fuelgauge->info.full_comp_work); |
| schedule_delayed_work(&fuelgauge->info.full_comp_work, 100); |
| |
| return false; |
| } |
| |
| bool max77823_fg_reset(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| if (!fg_reset_soc(fuelgauge)) |
| return true; |
| else |
| return false; |
| } |
| #endif |
| |
| static void max77823_fg_get_scaled_capacity( |
| struct max77823_fuelgauge_data *fuelgauge, |
| union power_supply_propval *val) |
| { |
| val->intval = (val->intval < fuelgauge->pdata->capacity_min) ? |
| 0 : ((val->intval - fuelgauge->pdata->capacity_min) * 1000 / |
| (fuelgauge->capacity_max - fuelgauge->pdata->capacity_min)); |
| |
| pr_debug("%s: scaled capacity (%d.%d)\n", |
| __func__, val->intval/10, val->intval%10); |
| } |
| |
| /* capacity is integer */ |
| static void max77823_fg_get_atomic_capacity( |
| struct max77823_fuelgauge_data *fuelgauge, |
| union power_supply_propval *val) |
| { |
| if (fuelgauge->pdata->capacity_calculation_type & |
| SEC_FUELGAUGE_CAPACITY_TYPE_ATOMIC) { |
| if (fuelgauge->capacity_old < val->intval) |
| val->intval = fuelgauge->capacity_old + 1; |
| else if (fuelgauge->capacity_old > val->intval) |
| val->intval = fuelgauge->capacity_old - 1; |
| } |
| |
| /* keep SOC stable in abnormal status */ |
| if (fuelgauge->pdata->capacity_calculation_type & |
| SEC_FUELGAUGE_CAPACITY_TYPE_SKIP_ABNORMAL) { |
| if (!fuelgauge->is_charging && |
| fuelgauge->capacity_old < val->intval) { |
| pr_err("%s: capacity (old %d : new %d)\n", |
| __func__, fuelgauge->capacity_old, val->intval); |
| val->intval = fuelgauge->capacity_old; |
| } |
| } |
| |
| /* updated old capacity */ |
| fuelgauge->capacity_old = val->intval; |
| } |
| |
| static int max77823_fg_calculate_dynamic_scale( |
| struct max77823_fuelgauge_data *fuelgauge) |
| { |
| union power_supply_propval raw_soc_val; |
| |
| #ifdef CONFIG_FUELGAUGE_MAX77823_VOLTAGE_TRACKING |
| raw_soc_val.intval = max77823_get_soc(fuelgauge) / 10; |
| #else |
| raw_soc_val.intval = get_fuelgauge_value(fuelgauge, |
| FG_RAW_SOC); |
| #endif |
| |
| if (raw_soc_val.intval < |
| fuelgauge->pdata->capacity_max - |
| fuelgauge->pdata->capacity_max_margin) { |
| fuelgauge->capacity_max = |
| fuelgauge->pdata->capacity_max - |
| fuelgauge->pdata->capacity_max_margin; |
| pr_debug("%s: capacity_max (%d)", __func__, |
| fuelgauge->capacity_max); |
| } else { |
| fuelgauge->capacity_max = |
| (raw_soc_val.intval > |
| fuelgauge->pdata->capacity_max + |
| fuelgauge->pdata->capacity_max_margin) ? |
| (fuelgauge->pdata->capacity_max + |
| fuelgauge->pdata->capacity_max_margin) : |
| raw_soc_val.intval; |
| pr_debug("%s: raw soc (%d)", __func__, |
| fuelgauge->capacity_max); |
| } |
| |
| fuelgauge->capacity_max = |
| (fuelgauge->capacity_max * 99 / 100); |
| |
| /* update capacity_old for sec_fg_get_atomic_capacity algorithm */ |
| fuelgauge->capacity_old = 100; |
| |
| pr_info("%s: %d is used for capacity_max\n", |
| __func__, fuelgauge->capacity_max); |
| |
| return fuelgauge->capacity_max; |
| } |
| |
| #ifdef CONFIG_FUELGAUGE_MAX77823_VOLTAGE_TRACKING |
| static int max77823_fg_get_property(strcut power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = |
| container_of(psy, struct max77823_fuelgauge_data, psy_fg); |
| |
| switch (psp) { |
| /* Cell voltage (VCELL, mV) */ |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = max77823_get_vcell(fuelgauge); |
| break; |
| /* Additional Voltage Information (mV) */ |
| case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| switch (val->intval) { |
| case SEC_BATTEY_VOLTAGE_AVERAGE: |
| val->intval = max77823_get_avgvcell(fuelgauge); |
| break; |
| case SEC_BATTEY_VOLTAGE_OCV: |
| val->intval = max77823_get_vfocv(fuelgauge); |
| break; |
| } |
| break; |
| /* Current (mA) */ |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = 0; |
| break; |
| /* Average Current (mA) */ |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| val->intval = 0; |
| break; |
| /* SOC (%) */ |
| case POWER_SUPPLY_PROP_CAPACITY: |
| if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_RAW) { |
| val->intval = max77823_get_soc(fuelgauge); |
| } else { |
| val->intval = max77823_get_soc(fuelgauge) / 10; |
| |
| if (fuelgauge->pdata->capacity_calculation_type & |
| (SEC_FUELGAUGE_CAPACITY_TYPE_SCALE | |
| SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE)) |
| max77823_fg_get_scaled_capacity(fuelgauge, val); |
| |
| /* capacity should be between 0% and 100% |
| * (0.1% degree) |
| */ |
| if (val->intval > 1000) |
| val->intval = 1000; |
| if (val->intval < 0) |
| val->intval = 0; |
| |
| /* get only integer part */ |
| val->intval /= 10; |
| |
| /* check whether doing the wake_unlock */ |
| if ((val->intval > fuelgauge->pdata->fuel_alert_soc) && |
| fuelgauge->is_fuel_alerted) { |
| wake_unlock(&fuelgauge->fuel_alert_wake_lock); |
| max77823_fg_fuelalert_init(fuelgauge, |
| fuelgauge->pdata->fuel_alert_soc); |
| } |
| |
| /* (Only for atomic capacity) |
| * In initial time, capacity_old is 0. |
| * and in resume from sleep, |
| * capacity_old is too different from actual soc. |
| * should update capacity_old |
| * by val->intval in booting or resume. |
| */ |
| if (fuelgauge->initial_update_of_soc) { |
| /* updated old capacity */ |
| fuelgauge->capacity_old = val->intval; |
| fuelgauge->initial_update_of_soc = false; |
| break; |
| } |
| |
| if (fuelgauge->pdata->capacity_calculation_type & |
| (SEC_FUELGAUGE_CAPACITY_TYPE_ATOMIC | |
| SEC_FUELGAUGE_CAPACITY_TYPE_SKIP_ABNORMAL)) |
| max77823_fg_get_atomic_capacity(fuelgauge, val); |
| } |
| break; |
| /* Battery Temperature */ |
| case POWER_SUPPLY_PROP_TEMP: |
| /* Target Temperature */ |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT: |
| val->intval = max77823_get_temperature(fuelgauge); |
| break; |
| default: |
| return false; |
| } |
| return true; |
| } |
| |
| |
| static int max77823_fg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = |
| container_of(psy, struct max77823_fuelgauge_data, psy_fg); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| if (val->intval == POWER_SUPPLY_STATUS_FULL) |
| max77823_fg_full_charged(fuelgauge); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| if (val->intval == POWER_SUPPLY_TYPE_BATTERY) { |
| if (fuelgauge->pdata->capacity_calculation_type & |
| SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE) |
| max77823_fg_calculate_dynamic_scale(fuelgauge); |
| } |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| fuelgauge->cable_type = val->intval; |
| if (val->intval == POWER_SUPPLY_TYPE_BATTERY) |
| fuelgauge->is_charging = false; |
| else |
| fuelgauge->is_charging = true; |
| break; |
| /* Battery Temperature */ |
| case POWER_SUPPLY_PROP_CAPACITY: |
| if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_RESET) { |
| fuelgauge->initial_update_of_soc = true; |
| if (!max77823_fg_reset(fuelgauge)) |
| return -EINVAL; |
| else |
| break; |
| } |
| /* Battery Temperature */ |
| case POWER_SUPPLY_PROP_TEMP: |
| /* Target Temperature */ |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT: |
| max77823_set_temperature(fuelgauge, val->intval); |
| break; |
| default: |
| return false; |
| } |
| return true; |
| } |
| #endif |
| |
| #ifdef CONFIG_FUELGAUGE_MAX77823_COULOMB_COUNTING |
| static int max77823_fg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = |
| container_of(psy, struct max77823_fuelgauge_data, psy_fg); |
| |
| switch (psp) { |
| /* Cell voltage (VCELL, mV) */ |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = get_fuelgauge_value(fuelgauge, FG_VOLTAGE); |
| break; |
| /* Additional Voltage Information (mV) */ |
| case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| switch (val->intval) { |
| case SEC_BATTEY_VOLTAGE_OCV: |
| val->intval = fg_read_vfocv(fuelgauge); |
| break; |
| case SEC_BATTEY_VOLTAGE_AVERAGE: |
| default: |
| val->intval = fg_read_avg_vcell(fuelgauge); |
| break; |
| } |
| break; |
| /* Current */ |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| switch (val->intval) { |
| case SEC_BATTEY_CURRENT_UA: |
| val->intval = |
| fg_read_current(fuelgauge, |
| SEC_BATTEY_CURRENT_UA); |
| break; |
| case SEC_BATTEY_CURRENT_MA: |
| default: |
| val->intval = get_fuelgauge_value(fuelgauge, |
| FG_CURRENT); |
| break; |
| } |
| break; |
| /* Average Current */ |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| switch (val->intval) { |
| case SEC_BATTEY_CURRENT_UA: |
| val->intval = |
| fg_read_avg_current(fuelgauge, |
| SEC_BATTEY_CURRENT_UA); |
| break; |
| case SEC_BATTEY_CURRENT_MA: |
| default: |
| val->intval = |
| get_fuelgauge_value(fuelgauge, |
| FG_CURRENT_AVG); |
| break; |
| } |
| break; |
| /* Full Capacity */ |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| switch (val->intval) { |
| case SEC_BATTEY_CAPACITY_DESIGNED: |
| val->intval = get_fuelgauge_value(fuelgauge, |
| FG_FULLCAP); |
| break; |
| case SEC_BATTEY_CAPACITY_ABSOLUTE: |
| val->intval = get_fuelgauge_value(fuelgauge, |
| FG_MIXCAP); |
| break; |
| case SEC_BATTEY_CAPACITY_TEMPERARY: |
| val->intval = get_fuelgauge_value(fuelgauge, |
| FG_AVCAP); |
| break; |
| case SEC_BATTEY_CAPACITY_CURRENT: |
| val->intval = get_fuelgauge_value(fuelgauge, |
| FG_REPCAP); |
| break; |
| } |
| break; |
| /* SOC (%) */ |
| case POWER_SUPPLY_PROP_CAPACITY: |
| if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_RAW) { |
| val->intval = get_fuelgauge_value(fuelgauge, |
| FG_RAW_SOC); |
| } else { |
| val->intval = get_fuelgauge_soc(fuelgauge); |
| |
| if (fuelgauge->pdata->capacity_calculation_type & |
| (SEC_FUELGAUGE_CAPACITY_TYPE_SCALE | |
| SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE)) |
| max77823_fg_get_scaled_capacity(fuelgauge, val); |
| |
| /* capacity should be between 0% and 100% |
| * (0.1% degree) |
| */ |
| if (val->intval > 1000) |
| val->intval = 1000; |
| if (val->intval < 0) |
| val->intval = 0; |
| |
| /* get only integer part */ |
| val->intval /= 10; |
| |
| /* check whether doing the wake_unlock */ |
| if ((val->intval > fuelgauge->pdata->fuel_alert_soc) && |
| fuelgauge->is_fuel_alerted) { |
| wake_unlock(&fuelgauge->fuel_alert_wake_lock); |
| max77823_fg_fuelalert_init(fuelgauge, |
| fuelgauge->pdata->fuel_alert_soc); |
| } |
| |
| /* (Only for atomic capacity) |
| * In initial time, capacity_old is 0. |
| * and in resume from sleep, |
| * capacity_old is too different from actual soc. |
| * should update capacity_old |
| * by val->intval in booting or resume. |
| */ |
| if (fuelgauge->initial_update_of_soc) { |
| /* updated old capacity */ |
| fuelgauge->capacity_old = val->intval; |
| fuelgauge->initial_update_of_soc = false; |
| break; |
| } |
| |
| if (fuelgauge->pdata->capacity_calculation_type & |
| (SEC_FUELGAUGE_CAPACITY_TYPE_ATOMIC | |
| SEC_FUELGAUGE_CAPACITY_TYPE_SKIP_ABNORMAL)) |
| max77823_fg_get_atomic_capacity(fuelgauge, val); |
| } |
| break; |
| /* Battery Temperature */ |
| case POWER_SUPPLY_PROP_TEMP: |
| /* Target Temperature */ |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT: |
| val->intval = get_fuelgauge_value(fuelgauge, |
| FG_TEMPERATURE); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int max77823_fg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = |
| container_of(psy, struct max77823_fuelgauge_data, psy_fg); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| if (val->intval == POWER_SUPPLY_STATUS_FULL) |
| max77823_fg_full_charged(fuelgauge); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| if (val->intval == POWER_SUPPLY_TYPE_BATTERY) { |
| if (fuelgauge->pdata->capacity_calculation_type & |
| SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE) |
| max77823_fg_calculate_dynamic_scale(fuelgauge); |
| } |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| fuelgauge->cable_type = val->intval; |
| if (val->intval == POWER_SUPPLY_TYPE_BATTERY) { |
| fuelgauge->is_charging = false; |
| } else { |
| fuelgauge->is_charging = true; |
| |
| if (fuelgauge->info.is_low_batt_alarm) { |
| pr_info("%s: Reset low_batt_alarm\n", |
| __func__); |
| fuelgauge->info.is_low_batt_alarm = false; |
| } |
| |
| reset_low_batt_comp_cnt(fuelgauge); |
| } |
| break; |
| /* Battery Temperature */ |
| case POWER_SUPPLY_PROP_CAPACITY: |
| if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_RESET) { |
| fuelgauge->initial_update_of_soc = true; |
| if (!max77823_fg_reset(fuelgauge)) |
| return -EINVAL; |
| else |
| break; |
| } |
| case POWER_SUPPLY_PROP_TEMP: |
| /* Target Temperature */ |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT: |
| fg_write_temp(fuelgauge, val->intval); |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| fg_reset_capacity_by_jig_connection(fuelgauge); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| #endif |
| |
| static void max77823_fg_isr_work(struct work_struct *work) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = |
| container_of(work, struct max77823_fuelgauge_data, isr_work.work); |
| |
| /* process for fuel gauge chip */ |
| max77823_fg_fuelalert_process(fuelgauge, fuelgauge->is_fuel_alerted); |
| |
| /* process for others */ |
| if (fuelgauge->pdata->fuelalert_process != NULL) |
| fuelgauge->pdata->fuelalert_process(fuelgauge->is_fuel_alerted); |
| } |
| |
| static irqreturn_t max77823_fg_irq_thread(int irq, void *irq_data) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = irq_data; |
| bool fuel_alerted; |
| |
| if (fuelgauge->pdata->fuel_alert_soc >= 0) { |
| fuel_alerted = |
| max77823_fg_is_fuelalerted(fuelgauge); |
| |
| pr_info("%s: Fuel-alert %salerted!\n", |
| __func__, fuel_alerted ? "" : "NOT "); |
| |
| fg_test_print(fuelgauge); |
| |
| if (fuel_alerted == fuelgauge->is_fuel_alerted) { |
| if (!fuelgauge->pdata->repeated_fuelalert) { |
| pr_debug("%s: Fuel-alert Repeated (%d)\n", |
| __func__, fuelgauge->is_fuel_alerted); |
| return IRQ_HANDLED; |
| } |
| } |
| |
| if (fuel_alerted) |
| wake_lock(&fuelgauge->fuel_alert_wake_lock); |
| else |
| wake_unlock(&fuelgauge->fuel_alert_wake_lock); |
| |
| schedule_delayed_work(&fuelgauge->isr_work, 0); |
| |
| fuelgauge->is_fuel_alerted = fuel_alerted; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int max77823_fuelgauge_debugfs_show(struct seq_file *s, void *data) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = s->private; |
| u8 reg; |
| u8 reg_data; |
| |
| seq_printf(s, "MAX77823 FUELGAUGE IC :\n"); |
| seq_printf(s, "===================\n"); |
| for (reg = 0xB0; reg <= 0xC3; reg++) { |
| max77823_read_reg(fuelgauge->i2c, reg, ®_data); |
| seq_printf(s, "0x%02x:\t0x%02x\n", reg, reg_data); |
| } |
| |
| seq_printf(s, "\n"); |
| return 0; |
| } |
| |
| static int max77823_fuelgauge_debugfs_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, max77823_fuelgauge_debugfs_show, inode->i_private); |
| } |
| |
| static const struct file_operations max77823_fuelgauge_debugfs_fops = { |
| .open = max77823_fuelgauge_debugfs_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| #ifdef CONFIG_OF |
| static int max77823_fuelgauge_parse_dt(struct max77823_fuelgauge_data *fuelgauge) |
| { |
| struct device_node *np = of_find_node_by_name(NULL, "max77823-fuelgauge"); |
| sec_battery_platform_data_t *pdata = fuelgauge->pdata; |
| int ret; |
| int i; |
| |
| /* reset, irq gpio info */ |
| if (np == NULL) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| ret = of_property_read_u32(np, "fuelgauge,capacity_max", |
| &pdata->capacity_max); |
| if (ret < 0) |
| pr_err("%s error reading capacity_max %d\n", __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity_max_margin", |
| &pdata->capacity_max_margin); |
| if (ret < 0) |
| pr_err("%s error reading capacity_max_margin %d\n", __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity_min", |
| &pdata->capacity_min); |
| if (ret < 0) |
| pr_err("%s error reading capacity_min %d\n", __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity_calculation_type", |
| &pdata->capacity_calculation_type); |
| if (ret < 0) |
| pr_err("%s error reading capacity_calculation_type %d\n", |
| __func__, ret); |
| ret = of_property_read_u32(np, "fuelgauge,fuel_alert_soc", |
| &pdata->fuel_alert_soc); |
| if (ret < 0) |
| pr_err("%s error reading pdata->fuel_alert_soc %d\n", |
| __func__, ret); |
| pdata->repeated_fuelalert = of_property_read_bool(np, |
| "fuelgauge,repeated_fuelalert"); |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity", |
| &fuelgauge->battery_data->Capacity); |
| if (ret < 0) |
| pr_err("%s error reading capacity_calculation_type %d\n", |
| __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,low_battery_comp_voltage", |
| &fuelgauge->battery_data->low_battery_comp_voltage); |
| if (ret < 0) |
| pr_err("%s error reading capacity_calculation_type %d\n", |
| __func__, ret); |
| |
| |
| for(i = 0; i < (CURRENT_RANGE_MAX_NUM * TABLE_MAX); i++) { |
| ret = of_property_read_u32_index(np, |
| "fuelgauge,low_battery_table", |
| i, |
| &fuelgauge->battery_data->low_battery_table[i/3][i%3]); |
| pr_info("[%d]", |
| fuelgauge->battery_data->low_battery_table[i/3][i%3]); |
| if ((i%3) == 2) |
| pr_info("\n"); |
| } |
| |
| pr_info("%s fg_irq: %d, capacity_max: %d\n" |
| "cpacity_max_margin: %d, capacity_min: %d\n" |
| "calculation_type: 0x%x, fuel_alert_soc: %d,\n" |
| "repeated_fuelalert: %d\n", |
| __func__, pdata->fg_irq, |
| pdata->capacity_max, pdata->capacity_max_margin, |
| pdata->capacity_min, pdata->capacity_calculation_type, |
| pdata->fuel_alert_soc, pdata->repeated_fuelalert); |
| } |
| |
| pr_info("[%s][%d][%d]\n", |
| __func__, fuelgauge->battery_data->Capacity, |
| fuelgauge->battery_data->low_battery_comp_voltage); |
| |
| return 0; |
| } |
| #endif |
| |
| static int __devinit max77823_fuelgauge_probe(struct platform_device *pdev) |
| { |
| struct max77823_dev *max77823 = dev_get_drvdata(pdev->dev.parent); |
| struct max77823_platform_data *pdata = dev_get_platdata(max77823->dev); |
| struct max77823_fuelgauge_data *fuelgauge; |
| int ret = 0; |
| union power_supply_propval raw_soc_val; |
| |
| pr_info("%s: MAX77823 Fuelgauge Driver Loading\n", __func__); |
| |
| fuelgauge = kzalloc(sizeof(*fuelgauge), GFP_KERNEL); |
| if (!fuelgauge) |
| return -ENOMEM; |
| |
| pdata->fuelgauge_data = kzalloc(sizeof(sec_battery_platform_data_t), GFP_KERNEL); |
| if (!pdata->fuelgauge_data) |
| return -ENOMEM; |
| |
| mutex_init(&fuelgauge->fg_lock); |
| |
| fuelgauge->dev = &pdev->dev; |
| fuelgauge->pdata = pdata->fuelgauge_data; |
| fuelgauge->i2c = max77823->fuelgauge; |
| fuelgauge->max77823_pdata = pdata; |
| |
| #if defined(CONFIG_OF) |
| fuelgauge->battery_data = kzalloc(sizeof(struct battery_data_t), |
| GFP_KERNEL); |
| if(!fuelgauge->battery_data) { |
| pr_err("Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| ret = max77823_fuelgauge_parse_dt(fuelgauge); |
| if (ret < 0) { |
| pr_err("%s not found charger dt! ret[%d]\n", |
| __func__, ret); |
| } |
| #endif |
| |
| platform_set_drvdata(pdev, fuelgauge); |
| |
| fuelgauge->psy_fg.name = "max77823-fuelgauge"; |
| fuelgauge->psy_fg.type = POWER_SUPPLY_TYPE_UNKNOWN; |
| fuelgauge->psy_fg.get_property = max77823_fg_get_property; |
| fuelgauge->psy_fg.set_property = max77823_fg_set_property; |
| fuelgauge->psy_fg.properties = max77823_fuelgauge_props; |
| fuelgauge->psy_fg.num_properties = |
| ARRAY_SIZE(max77823_fuelgauge_props); |
| fuelgauge->capacity_max = fuelgauge->pdata->capacity_max; |
| #ifdef CONFIG_FUELGAUGE_MAX77823_VOLTAGE_TRACKING |
| raw_soc_val.intval = max77823_get_soc(fuelgauge) / 10; |
| #else |
| raw_soc_val.intval = get_fuelgauge_value(fuelgauge, FG_RAW_SOC); |
| #endif |
| |
| if(raw_soc_val.intval > fuelgauge->pdata->capacity_max) |
| max77823_fg_calculate_dynamic_scale(fuelgauge); |
| |
| (void) debugfs_create_file("max77823-fuelgauge-regs", |
| S_IRUGO, NULL, (void *)fuelgauge, &max77823_fuelgauge_debugfs_fops); |
| |
| if (!max77823_fg_init(fuelgauge)) { |
| pr_err("%s: Failed to Initialize Fuelgauge\n", __func__); |
| goto err_free; |
| } |
| |
| ret = power_supply_register(&pdev->dev, &fuelgauge->psy_fg); |
| if (ret) { |
| pr_err("%s: Failed to Register psy_fg\n", __func__); |
| goto err_free; |
| } |
| |
| fuelgauge->fg_irq = pdata->irq_base + MAX77823_FG_IRQ_ALERT; |
| pr_info("[%s]IRQ_BASE(%d) FG_IRQ(%d)\n", |
| __func__, pdata->irq_base, fuelgauge->fg_irq); |
| |
| if (fuelgauge->fg_irq) { |
| INIT_DELAYED_WORK(&fuelgauge->isr_work, max77823_fg_isr_work); |
| |
| ret = request_threaded_irq(fuelgauge->fg_irq, |
| NULL, max77823_fg_irq_thread, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| "fuelgauge-irq", fuelgauge); |
| if (ret) { |
| pr_err("%s: Failed to Reqeust IRQ\n", __func__); |
| goto err_supply_unreg; |
| } |
| } |
| |
| fuelgauge->is_fuel_alerted = false; |
| if (fuelgauge->pdata->fuel_alert_soc >= 0) { |
| if (max77823_fg_fuelalert_init(fuelgauge, |
| fuelgauge->pdata->fuel_alert_soc)) |
| wake_lock_init(&fuelgauge->fuel_alert_wake_lock, |
| WAKE_LOCK_SUSPEND, "fuel_alerted"); |
| else { |
| pr_err("%s: Failed to Initialize Fuel-alert\n", |
| __func__); |
| goto err_irq; |
| } |
| } |
| |
| fuelgauge->initial_update_of_soc = true; |
| |
| pr_info("%s: MAX77823 Fuelgauge Driver Loaded\n", __func__); |
| return 0; |
| |
| err_irq: |
| if (fuelgauge->fg_irq) |
| free_irq(fuelgauge->fg_irq, fuelgauge); |
| err_supply_unreg: |
| power_supply_unregister(&fuelgauge->psy_fg); |
| err_free: |
| mutex_destroy(&fuelgauge->fg_lock); |
| kfree(fuelgauge); |
| |
| return ret; |
| } |
| |
| static int __devexit max77823_fuelgauge_remove(struct platform_device *pdev) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = |
| platform_get_drvdata(pdev); |
| |
| if (fuelgauge->pdata->fuel_alert_soc >= 0) |
| wake_lock_destroy(&fuelgauge->fuel_alert_wake_lock); |
| |
| return 0; |
| } |
| |
| static int max77823_fuelgauge_suspend(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static int max77823_fuelgauge_resume(struct device *dev) |
| { |
| struct max77823_fuelgauge_data *fuelgauge = dev_get_drvdata(dev); |
| |
| fuelgauge->initial_update_of_soc = true; |
| |
| return 0; |
| } |
| |
| static void max77823_fuelgauge_shutdown(struct device *dev) |
| { |
| } |
| |
| #if defined(CONFIG_OF) |
| static struct of_device_id max77823_fuelgauge_dt_ids[] = { |
| { .compatible = "samsung,max77823-fuelgauge" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, max77823_fuelgauge_dt_ids); |
| #endif /* CONFIG_OF */ |
| |
| static SIMPLE_DEV_PM_OPS(max77823_fuelgauge_pm_ops, max77823_fuelgauge_suspend, |
| max77823_fuelgauge_resume); |
| |
| static struct platform_driver max77823_fuelgauge_driver = { |
| .driver = { |
| .name = "max77823-fuelgauge", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &max77823_fuelgauge_pm_ops, |
| #endif |
| .shutdown = max77823_fuelgauge_shutdown, |
| #if defined(CONFIG_OF) |
| .of_match_table = max77823_fuelgauge_dt_ids, |
| #endif /* CONFIG_OF */ |
| }, |
| .probe = max77823_fuelgauge_probe, |
| .remove = __devexit_p(max77823_fuelgauge_remove), |
| }; |
| |
| static int __init max77823_fuelgauge_init(void) |
| { |
| pr_info("%s: \n", __func__); |
| return platform_driver_register(&max77823_fuelgauge_driver); |
| } |
| |
| static void __exit max77823_fuelgauge_exit(void) |
| { |
| platform_driver_unregister(&max77823_fuelgauge_driver); |
| } |
| module_init(max77823_fuelgauge_init); |
| module_exit(max77823_fuelgauge_exit); |
| |
| MODULE_DESCRIPTION("Samsung MAX778023 Fuel Gauge Driver"); |
| MODULE_AUTHOR("Samsung Electronics"); |
| MODULE_LICENSE("GPL"); |