| /* |
| * dts file for Xilinx ZynqMP |
| * |
| * (C) Copyright 2014 - 2015, Xilinx, Inc. |
| * |
| * Michal Simek <michal.simek@xilinx.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| */ |
| |
| / { |
| compatible = "xlnx,zynqmp"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x0>; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x1>; |
| }; |
| |
| cpu@2 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x2>; |
| }; |
| |
| cpu@3 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x3>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <0 143 4>, |
| <0 144 4>, |
| <0 145 4>, |
| <0 146 4>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <1 13 0xf01>, |
| <1 14 0xf01>, |
| <1 11 0xf01>, |
| <1 10 0xf01>; |
| }; |
| |
| amba_apu: amba_apu@0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| |
| gic: interrupt-controller@f9010000 { |
| compatible = "arm,gic-400", "arm,cortex-a15-gic"; |
| #interrupt-cells = <3>; |
| reg = <0x0 0xf9010000 0x10000>, |
| <0x0 0xf902f000 0x2000>, |
| <0x0 0xf9040000 0x20000>, |
| <0x0 0xf906f000 0x2000>; |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <1 9 0xf04>; |
| }; |
| }; |
| |
| amba { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| |
| can0: can@ff060000 { |
| compatible = "xlnx,zynq-can-1.0"; |
| status = "disabled"; |
| clocks = <&misc_clk &misc_clk>; |
| clock-names = "can_clk", "pclk"; |
| reg = <0x0 0xff060000 0x1000>; |
| interrupts = <0 23 4>; |
| interrupt-parent = <&gic>; |
| tx-fifo-depth = <0x40>; |
| rx-fifo-depth = <0x40>; |
| }; |
| |
| can1: can@ff070000 { |
| compatible = "xlnx,zynq-can-1.0"; |
| status = "disabled"; |
| clocks = <&misc_clk &misc_clk>; |
| clock-names = "can_clk", "pclk"; |
| reg = <0x0 0xff070000 0x1000>; |
| interrupts = <0 24 4>; |
| interrupt-parent = <&gic>; |
| tx-fifo-depth = <0x40>; |
| rx-fifo-depth = <0x40>; |
| }; |
| |
| misc_clk: misc_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| }; |
| |
| gpio: gpio@ff0a0000 { |
| compatible = "xlnx,zynqmp-gpio-1.0"; |
| status = "disabled"; |
| #gpio-cells = <0x2>; |
| clocks = <&misc_clk>; |
| interrupt-parent = <&gic>; |
| interrupts = <0 16 4>; |
| reg = <0x0 0xff0a0000 0x1000>; |
| }; |
| |
| gem0: ethernet@ff0b0000 { |
| compatible = "cdns,gem"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 57 4>, <0 57 4>; |
| reg = <0x0 0xff0b0000 0x1000>; |
| clock-names = "pclk", "hclk", "tx_clk"; |
| clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| gem1: ethernet@ff0c0000 { |
| compatible = "cdns,gem"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 59 4>, <0 59 4>; |
| reg = <0x0 0xff0c0000 0x1000>; |
| clock-names = "pclk", "hclk", "tx_clk"; |
| clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| gem2: ethernet@ff0d0000 { |
| compatible = "cdns,gem"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 61 4>, <0 61 4>; |
| reg = <0x0 0xff0d0000 0x1000>; |
| clock-names = "pclk", "hclk", "tx_clk"; |
| clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| gem3: ethernet@ff0e0000 { |
| compatible = "cdns,gem"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 63 4>, <0 63 4>; |
| reg = <0x0 0xff0e0000 0x1000>; |
| clock-names = "pclk", "hclk", "tx_clk"; |
| clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c_clk: i2c_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0x0>; |
| clock-frequency = <111111111>; |
| }; |
| |
| i2c0: i2c@ff020000 { |
| compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 17 4>; |
| reg = <0x0 0xff020000 0x1000>; |
| clocks = <&i2c_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@ff030000 { |
| compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 18 4>; |
| reg = <0x0 0xff030000 0x1000>; |
| clocks = <&i2c_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| sata_clk: sata_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <75000000>; |
| }; |
| |
| sata: ahci@fd0c0000 { |
| compatible = "ceva,ahci-1v84"; |
| status = "disabled"; |
| reg = <0x0 0xfd0c0000 0x2000>; |
| interrupt-parent = <&gic>; |
| interrupts = <0 133 4>; |
| clocks = <&sata_clk>; |
| }; |
| |
| sdhci0: sdhci@ff160000 { |
| compatible = "arasan,sdhci-8.9a"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 48 4>; |
| reg = <0x0 0xff160000 0x1000>; |
| clock-names = "clk_xin", "clk_ahb"; |
| clocks = <&misc_clk>, <&misc_clk>; |
| }; |
| |
| sdhci1: sdhci@ff170000 { |
| compatible = "arasan,sdhci-8.9a"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 49 4>; |
| reg = <0x0 0xff170000 0x1000>; |
| clock-names = "clk_xin", "clk_ahb"; |
| clocks = <&misc_clk>, <&misc_clk>; |
| }; |
| |
| smmu: smmu@fd800000 { |
| compatible = "arm,mmu-500"; |
| reg = <0x0 0xfd800000 0x20000>; |
| #global-interrupts = <1>; |
| interrupt-parent = <&gic>; |
| interrupts = <0 157 4>, |
| <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, |
| <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, |
| <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, |
| <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>; |
| }; |
| |
| spi0: spi@ff040000 { |
| compatible = "cdns,spi-r1p6"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 19 4>; |
| reg = <0x0 0xff040000 0x1000>; |
| clock-names = "ref_clk", "pclk"; |
| clocks = <&misc_clk &misc_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi1: spi@ff050000 { |
| compatible = "cdns,spi-r1p6"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 20 4>; |
| reg = <0x0 0xff050000 0x1000>; |
| clock-names = "ref_clk", "pclk"; |
| clocks = <&misc_clk &misc_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| ttc0: timer@ff110000 { |
| compatible = "cdns,ttc"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 36 4>, <0 37 4>, <0 38 4>; |
| reg = <0x0 0xff110000 0x1000>; |
| clocks = <&misc_clk>; |
| timer-width = <32>; |
| }; |
| |
| ttc1: timer@ff120000 { |
| compatible = "cdns,ttc"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 39 4>, <0 40 4>, <0 41 4>; |
| reg = <0x0 0xff120000 0x1000>; |
| clocks = <&misc_clk>; |
| timer-width = <32>; |
| }; |
| |
| ttc2: timer@ff130000 { |
| compatible = "cdns,ttc"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 42 4>, <0 43 4>, <0 44 4>; |
| reg = <0x0 0xff130000 0x1000>; |
| clocks = <&misc_clk>; |
| timer-width = <32>; |
| }; |
| |
| ttc3: timer@ff140000 { |
| compatible = "cdns,ttc"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 45 4>, <0 46 4>, <0 47 4>; |
| reg = <0x0 0xff140000 0x1000>; |
| clocks = <&misc_clk>; |
| timer-width = <32>; |
| }; |
| |
| uart0: serial@ff000000 { |
| compatible = "cdns,uart-r1p8"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 21 4>; |
| reg = <0x0 0xff000000 0x1000>; |
| clock-names = "uart_clk", "pclk"; |
| clocks = <&misc_clk &misc_clk>; |
| }; |
| |
| uart1: serial@ff010000 { |
| compatible = "cdns,uart-r1p8"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 22 4>; |
| reg = <0x0 0xff010000 0x1000>; |
| clock-names = "uart_clk", "pclk"; |
| clocks = <&misc_clk &misc_clk>; |
| }; |
| |
| usb0: usb@fe200000 { |
| compatible = "snps,dwc3"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 65 4>; |
| reg = <0x0 0xfe200000 0x40000>; |
| clock-names = "clk_xin", "clk_ahb"; |
| clocks = <&misc_clk>, <&misc_clk>; |
| }; |
| |
| usb1: usb@fe300000 { |
| compatible = "snps,dwc3"; |
| status = "disabled"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 70 4>; |
| reg = <0x0 0xfe300000 0x40000>; |
| clock-names = "clk_xin", "clk_ahb"; |
| clocks = <&misc_clk>, <&misc_clk>; |
| }; |
| |
| watchdog0: watchdog@fd4d0000 { |
| compatible = "cdns,wdt-r1p2"; |
| status = "disabled"; |
| clocks= <&misc_clk>; |
| interrupt-parent = <&gic>; |
| interrupts = <0 52 1>; |
| reg = <0x0 0xfd4d0000 0x1000>; |
| timeout-sec = <10>; |
| }; |
| }; |
| }; |