| /* moxart.dtsi - Device Tree Include file for MOXA ART family SoC |
| * |
| * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> |
| * |
| * Licensed under GPLv2 or later. |
| */ |
| |
| /include/ "skeleton.dtsi" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| compatible = "moxa,moxart"; |
| model = "MOXART"; |
| interrupt-parent = <&intc>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "faraday,fa526"; |
| reg = <0>; |
| }; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x90000000 0x10000000>; |
| ranges; |
| |
| intc: interrupt-controller@98800000 { |
| compatible = "moxa,moxart-ic", "faraday,ftintc010"; |
| reg = <0x98800000 0x100>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-mask = <0x00080000>; |
| }; |
| |
| clk_pll: clk_pll@98100000 { |
| compatible = "moxa,moxart-pll-clock"; |
| #clock-cells = <0>; |
| reg = <0x98100000 0x34>; |
| }; |
| |
| clk_apb: clk_apb@98100000 { |
| compatible = "moxa,moxart-apb-clock"; |
| #clock-cells = <0>; |
| reg = <0x98100000 0x34>; |
| clocks = <&clk_pll>; |
| }; |
| |
| timer: timer@98400000 { |
| compatible = "moxa,moxart-timer"; |
| reg = <0x98400000 0x42>; |
| interrupts = <19 IRQ_TYPE_EDGE_FALLING>; |
| clocks = <&clk_apb>; |
| }; |
| |
| gpio: gpio@98700000 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| compatible = "moxa,moxart-gpio"; |
| reg = <0x98700000 0xC>; |
| }; |
| |
| rtc: rtc { |
| compatible = "moxa,moxart-rtc"; |
| gpio-rtc-sclk = <&gpio 5 0>; |
| gpio-rtc-data = <&gpio 6 0>; |
| gpio-rtc-reset = <&gpio 7 0>; |
| }; |
| |
| dma: dma@90500000 { |
| compatible = "moxa,moxart-dma"; |
| reg = <0x90500080 0x40>; |
| interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| }; |
| |
| watchdog: watchdog@98500000 { |
| compatible = "moxa,moxart-watchdog"; |
| reg = <0x98500000 0x10>; |
| clocks = <&clk_apb>; |
| }; |
| |
| sdhci: sdhci@98e00000 { |
| compatible = "moxa,moxart-sdhci"; |
| reg = <0x98e00000 0x5C>; |
| interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_apb>; |
| dmas = <&dma 5>, |
| <&dma 5>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| mdio0: mdio@90900090 { |
| compatible = "moxa,moxart-mdio"; |
| reg = <0x90900090 0x8>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| mdio1: mdio@92000090 { |
| compatible = "moxa,moxart-mdio"; |
| reg = <0x92000090 0x8>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| mac0: mac@90900000 { |
| compatible = "moxa,moxart-mac"; |
| reg = <0x90900000 0x90>; |
| interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; |
| phy-handle = <ðphy0>; |
| phy-mode = "mii"; |
| status = "disabled"; |
| }; |
| |
| mac1: mac@92000000 { |
| compatible = "moxa,moxart-mac"; |
| reg = <0x92000000 0x90>; |
| interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; |
| phy-handle = <ðphy1>; |
| phy-mode = "mii"; |
| status = "disabled"; |
| }; |
| |
| uart0: uart@98200000 { |
| compatible = "ns16550a"; |
| reg = <0x98200000 0x20>; |
| interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <14745600>; |
| status = "disabled"; |
| }; |
| }; |
| }; |