| /* cx25840 audio functions |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| |
| #include <linux/videodev2.h> |
| #include <linux/i2c.h> |
| #include <media/v4l2-common.h> |
| #include <media/cx25840.h> |
| |
| #include "cx25840-core.h" |
| |
| /* |
| * Note: The PLL and SRC parameters are based on a reference frequency that |
| * would ideally be: |
| * |
| * NTSC Color subcarrier freq * 8 = 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz |
| * |
| * However, it's not the exact reference frequency that matters, only that the |
| * firmware and modules that comprise the driver for a particular board all |
| * use the same value (close to the ideal value). |
| * |
| * Comments below will note which reference frequency is assumed for various |
| * parameters. They will usually be one of |
| * |
| * ref_freq = 28.636360 MHz |
| * or |
| * ref_freq = 28.636363 MHz |
| */ |
| |
| static int cx25840_set_audclk_freq(struct i2c_client *client, u32 freq) |
| { |
| struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
| |
| if (state->aud_input != CX25840_AUDIO_SERIAL) { |
| switch (freq) { |
| case 32000: |
| /* |
| * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 |
| * AUX_PLL Integer = 0x06, AUX PLL Post Divider = 0x10 |
| */ |
| cx25840_write4(client, 0x108, 0x1006040f); |
| |
| /* |
| * VID_PLL Fraction (register 0x10c) = 0x2be2fe |
| * 28636360 * 0xf.15f17f0/4 = 108 MHz |
| * 432 MHz pre-postdivide |
| */ |
| |
| /* |
| * AUX_PLL Fraction = 0x1bb39ee |
| * 28636363 * 0x6.dd9cf70/0x10 = 32000 * 384 |
| * 196.6 MHz pre-postdivide |
| * FIXME < 200 MHz is out of specified valid range |
| * FIXME 28636363 ref_freq doesn't match VID PLL ref |
| */ |
| cx25840_write4(client, 0x110, 0x01bb39ee); |
| |
| /* |
| * SA_MCLK_SEL = 1 |
| * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider |
| */ |
| cx25840_write(client, 0x127, 0x50); |
| |
| if (is_cx2583x(state)) |
| break; |
| |
| /* src3/4/6_ctl */ |
| /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */ |
| cx25840_write4(client, 0x900, 0x0801f77f); |
| cx25840_write4(client, 0x904, 0x0801f77f); |
| cx25840_write4(client, 0x90c, 0x0801f77f); |
| break; |
| |
| case 44100: |
| /* |
| * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 |
| * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x10 |
| */ |
| cx25840_write4(client, 0x108, 0x1009040f); |
| |
| /* |
| * VID_PLL Fraction (register 0x10c) = 0x2be2fe |
| * 28636360 * 0xf.15f17f0/4 = 108 MHz |
| * 432 MHz pre-postdivide |
| */ |
| |
| /* |
| * AUX_PLL Fraction = 0x0ec6bd6 |
| * 28636363 * 0x9.7635eb0/0x10 = 44100 * 384 |
| * 271 MHz pre-postdivide |
| * FIXME 28636363 ref_freq doesn't match VID PLL ref |
| */ |
| cx25840_write4(client, 0x110, 0x00ec6bd6); |
| |
| /* |
| * SA_MCLK_SEL = 1 |
| * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider |
| */ |
| cx25840_write(client, 0x127, 0x50); |
| |
| if (is_cx2583x(state)) |
| break; |
| |
| /* src3/4/6_ctl */ |
| /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */ |
| cx25840_write4(client, 0x900, 0x08016d59); |
| cx25840_write4(client, 0x904, 0x08016d59); |
| cx25840_write4(client, 0x90c, 0x08016d59); |
| break; |
| |
| case 48000: |
| /* |
| * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 |
| * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x10 |
| */ |
| cx25840_write4(client, 0x108, 0x100a040f); |
| |
| /* |
| * VID_PLL Fraction (register 0x10c) = 0x2be2fe |
| * 28636360 * 0xf.15f17f0/4 = 108 MHz |
| * 432 MHz pre-postdivide |
| */ |
| |
| /* |
| * AUX_PLL Fraction = 0x098d6e5 |
| * 28636363 * 0xa.4c6b728/0x10 = 48000 * 384 |
| * 295 MHz pre-postdivide |
| * FIXME 28636363 ref_freq doesn't match VID PLL ref |
| */ |
| cx25840_write4(client, 0x110, 0x0098d6e5); |
| |
| /* |
| * SA_MCLK_SEL = 1 |
| * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider |
| */ |
| cx25840_write(client, 0x127, 0x50); |
| |
| if (is_cx2583x(state)) |
| break; |
| |
| /* src3/4/6_ctl */ |
| /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ |
| cx25840_write4(client, 0x900, 0x08014faa); |
| cx25840_write4(client, 0x904, 0x08014faa); |
| cx25840_write4(client, 0x90c, 0x08014faa); |
| break; |
| } |
| } else { |
| switch (freq) { |
| case 32000: |
| /* |
| * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 |
| * AUX_PLL Integer = 0x08, AUX PLL Post Divider = 0x1e |
| */ |
| cx25840_write4(client, 0x108, 0x1e08040f); |
| |
| /* |
| * VID_PLL Fraction (register 0x10c) = 0x2be2fe |
| * 28636360 * 0xf.15f17f0/4 = 108 MHz |
| * 432 MHz pre-postdivide |
| */ |
| |
| /* |
| * AUX_PLL Fraction = 0x12a0869 |
| * 28636363 * 0x8.9504348/0x1e = 32000 * 256 |
| * 246 MHz pre-postdivide |
| * FIXME 28636363 ref_freq doesn't match VID PLL ref |
| */ |
| cx25840_write4(client, 0x110, 0x012a0869); |
| |
| /* |
| * SA_MCLK_SEL = 1 |
| * SA_MCLK_DIV = 0x14 = 256/384 * AUX_PLL post dvivider |
| */ |
| cx25840_write(client, 0x127, 0x54); |
| |
| if (is_cx2583x(state)) |
| break; |
| |
| /* src1_ctl */ |
| /* 0x1.0000 = 32000/32000 */ |
| cx25840_write4(client, 0x8f8, 0x08010000); |
| |
| /* src3/4/6_ctl */ |
| /* 0x2.0000 = 2 * (32000/32000) */ |
| cx25840_write4(client, 0x900, 0x08020000); |
| cx25840_write4(client, 0x904, 0x08020000); |
| cx25840_write4(client, 0x90c, 0x08020000); |
| break; |
| |
| case 44100: |
| /* |
| * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 |
| * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x18 |
| */ |
| cx25840_write4(client, 0x108, 0x1809040f); |
| |
| /* |
| * VID_PLL Fraction (register 0x10c) = 0x2be2fe |
| * 28636360 * 0xf.15f17f0/4 = 108 MHz |
| * 432 MHz pre-postdivide |
| */ |
| |
| /* |
| * AUX_PLL Fraction = 0x0ec6bd6 |
| * 28636363 * 0x9.7635eb0/0x18 = 44100 * 256 |
| * 271 MHz pre-postdivide |
| * FIXME 28636363 ref_freq doesn't match VID PLL ref |
| */ |
| cx25840_write4(client, 0x110, 0x00ec6bd6); |
| |
| /* |
| * SA_MCLK_SEL = 1 |
| * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider |
| */ |
| cx25840_write(client, 0x127, 0x50); |
| |
| if (is_cx2583x(state)) |
| break; |
| |
| /* src1_ctl */ |
| /* 0x1.60cd = 44100/32000 */ |
| cx25840_write4(client, 0x8f8, 0x080160cd); |
| |
| /* src3/4/6_ctl */ |
| /* 0x1.7385 = 2 * (32000/44100) */ |
| cx25840_write4(client, 0x900, 0x08017385); |
| cx25840_write4(client, 0x904, 0x08017385); |
| cx25840_write4(client, 0x90c, 0x08017385); |
| break; |
| |
| case 48000: |
| /* |
| * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 |
| * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x18 |
| */ |
| cx25840_write4(client, 0x108, 0x180a040f); |
| |
| /* |
| * VID_PLL Fraction (register 0x10c) = 0x2be2fe |
| * 28636360 * 0xf.15f17f0/4 = 108 MHz |
| * 432 MHz pre-postdivide |
| */ |
| |
| /* |
| * AUX_PLL Fraction = 0x098d6e5 |
| * 28636363 * 0xa.4c6b728/0x18 = 48000 * 256 |
| * 295 MHz pre-postdivide |
| * FIXME 28636363 ref_freq doesn't match VID PLL ref |
| */ |
| cx25840_write4(client, 0x110, 0x0098d6e5); |
| |
| /* |
| * SA_MCLK_SEL = 1 |
| * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider |
| */ |
| cx25840_write(client, 0x127, 0x50); |
| |
| if (is_cx2583x(state)) |
| break; |
| |
| /* src1_ctl */ |
| /* 0x1.8000 = 48000/32000 */ |
| cx25840_write4(client, 0x8f8, 0x08018000); |
| |
| /* src3/4/6_ctl */ |
| /* 0x1.5555 = 2 * (32000/48000) */ |
| cx25840_write4(client, 0x900, 0x08015555); |
| cx25840_write4(client, 0x904, 0x08015555); |
| cx25840_write4(client, 0x90c, 0x08015555); |
| break; |
| } |
| } |
| |
| state->audclk_freq = freq; |
| |
| return 0; |
| } |
| |
| static inline int cx25836_set_audclk_freq(struct i2c_client *client, u32 freq) |
| { |
| return cx25840_set_audclk_freq(client, freq); |
| } |
| |
| static int cx23885_set_audclk_freq(struct i2c_client *client, u32 freq) |
| { |
| struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
| |
| if (state->aud_input != CX25840_AUDIO_SERIAL) { |
| switch (freq) { |
| case 32000: |
| case 44100: |
| case 48000: |
| /* We don't have register values |
| * so avoid destroying registers. */ |
| /* FIXME return -EINVAL; */ |
| break; |
| } |
| } else { |
| switch (freq) { |
| case 32000: |
| case 44100: |
| /* We don't have register values |
| * so avoid destroying registers. */ |
| /* FIXME return -EINVAL; */ |
| break; |
| |
| case 48000: |
| /* src1_ctl */ |
| /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */ |
| cx25840_write4(client, 0x8f8, 0x0801867c); |
| |
| /* src3/4/6_ctl */ |
| /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ |
| cx25840_write4(client, 0x900, 0x08014faa); |
| cx25840_write4(client, 0x904, 0x08014faa); |
| cx25840_write4(client, 0x90c, 0x08014faa); |
| break; |
| } |
| } |
| |
| state->audclk_freq = freq; |
| |
| return 0; |
| } |
| |
| static int cx231xx_set_audclk_freq(struct i2c_client *client, u32 freq) |
| { |
| struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
| |
| if (state->aud_input != CX25840_AUDIO_SERIAL) { |
| switch (freq) { |
| case 32000: |
| /* src3/4/6_ctl */ |
| /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */ |
| cx25840_write4(client, 0x900, 0x0801f77f); |
| cx25840_write4(client, 0x904, 0x0801f77f); |
| cx25840_write4(client, 0x90c, 0x0801f77f); |
| break; |
| |
| case 44100: |
| /* src3/4/6_ctl */ |
| /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */ |
| cx25840_write4(client, 0x900, 0x08016d59); |
| cx25840_write4(client, 0x904, 0x08016d59); |
| cx25840_write4(client, 0x90c, 0x08016d59); |
| break; |
| |
| case 48000: |
| /* src3/4/6_ctl */ |
| /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ |
| cx25840_write4(client, 0x900, 0x08014faa); |
| cx25840_write4(client, 0x904, 0x08014faa); |
| cx25840_write4(client, 0x90c, 0x08014faa); |
| break; |
| } |
| } else { |
| switch (freq) { |
| /* FIXME These cases make different assumptions about audclk */ |
| case 32000: |
| /* src1_ctl */ |
| /* 0x1.0000 = 32000/32000 */ |
| cx25840_write4(client, 0x8f8, 0x08010000); |
| |
| /* src3/4/6_ctl */ |
| /* 0x2.0000 = 2 * (32000/32000) */ |
| cx25840_write4(client, 0x900, 0x08020000); |
| cx25840_write4(client, 0x904, 0x08020000); |
| cx25840_write4(client, 0x90c, 0x08020000); |
| break; |
| |
| case 44100: |
| /* src1_ctl */ |
| /* 0x1.60cd = 44100/32000 */ |
| cx25840_write4(client, 0x8f8, 0x080160cd); |
| |
| /* src3/4/6_ctl */ |
| /* 0x1.7385 = 2 * (32000/44100) */ |
| cx25840_write4(client, 0x900, 0x08017385); |
| cx25840_write4(client, 0x904, 0x08017385); |
| cx25840_write4(client, 0x90c, 0x08017385); |
| break; |
| |
| case 48000: |
| /* src1_ctl */ |
| /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */ |
| cx25840_write4(client, 0x8f8, 0x0801867c); |
| |
| /* src3/4/6_ctl */ |
| /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ |
| cx25840_write4(client, 0x900, 0x08014faa); |
| cx25840_write4(client, 0x904, 0x08014faa); |
| cx25840_write4(client, 0x90c, 0x08014faa); |
| break; |
| } |
| } |
| |
| state->audclk_freq = freq; |
| |
| return 0; |
| } |
| |
| static int set_audclk_freq(struct i2c_client *client, u32 freq) |
| { |
| struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
| |
| if (freq != 32000 && freq != 44100 && freq != 48000) |
| return -EINVAL; |
| |
| if (is_cx231xx(state)) |
| return cx231xx_set_audclk_freq(client, freq); |
| |
| if (is_cx2388x(state)) |
| return cx23885_set_audclk_freq(client, freq); |
| |
| if (is_cx2583x(state)) |
| return cx25836_set_audclk_freq(client, freq); |
| |
| return cx25840_set_audclk_freq(client, freq); |
| } |
| |
| void cx25840_audio_set_path(struct i2c_client *client) |
| { |
| struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
| |
| /* assert soft reset */ |
| cx25840_and_or(client, 0x810, ~0x1, 0x01); |
| |
| /* stop microcontroller */ |
| cx25840_and_or(client, 0x803, ~0x10, 0); |
| |
| /* Mute everything to prevent the PFFT! */ |
| cx25840_write(client, 0x8d3, 0x1f); |
| |
| if (state->aud_input == CX25840_AUDIO_SERIAL) { |
| /* Set Path1 to Serial Audio Input */ |
| cx25840_write4(client, 0x8d0, 0x01011012); |
| |
| /* The microcontroller should not be started for the |
| * non-tuner inputs: autodetection is specific for |
| * TV audio. */ |
| } else { |
| /* Set Path1 to Analog Demod Main Channel */ |
| cx25840_write4(client, 0x8d0, 0x1f063870); |
| } |
| |
| set_audclk_freq(client, state->audclk_freq); |
| |
| if (state->aud_input != CX25840_AUDIO_SERIAL) { |
| /* When the microcontroller detects the |
| * audio format, it will unmute the lines */ |
| cx25840_and_or(client, 0x803, ~0x10, 0x10); |
| } |
| |
| /* deassert soft reset */ |
| cx25840_and_or(client, 0x810, ~0x1, 0x00); |
| |
| /* Ensure the controller is running when we exit */ |
| if (is_cx2388x(state) || is_cx231xx(state)) |
| cx25840_and_or(client, 0x803, ~0x10, 0x10); |
| } |
| |
| static void set_volume(struct i2c_client *client, int volume) |
| { |
| int vol; |
| |
| /* Convert the volume to msp3400 values (0-127) */ |
| vol = volume >> 9; |
| |
| /* now scale it up to cx25840 values |
| * -114dB to -96dB maps to 0 |
| * this should be 19, but in my testing that was 4dB too loud */ |
| if (vol <= 23) { |
| vol = 0; |
| } else { |
| vol -= 23; |
| } |
| |
| /* PATH1_VOLUME */ |
| cx25840_write(client, 0x8d4, 228 - (vol * 2)); |
| } |
| |
| static void set_balance(struct i2c_client *client, int balance) |
| { |
| int bal = balance >> 8; |
| if (bal > 0x80) { |
| /* PATH1_BAL_LEFT */ |
| cx25840_and_or(client, 0x8d5, 0x7f, 0x80); |
| /* PATH1_BAL_LEVEL */ |
| cx25840_and_or(client, 0x8d5, ~0x7f, bal & 0x7f); |
| } else { |
| /* PATH1_BAL_LEFT */ |
| cx25840_and_or(client, 0x8d5, 0x7f, 0x00); |
| /* PATH1_BAL_LEVEL */ |
| cx25840_and_or(client, 0x8d5, ~0x7f, 0x80 - bal); |
| } |
| } |
| |
| int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct cx25840_state *state = to_state(sd); |
| int retval; |
| |
| if (!is_cx2583x(state)) |
| cx25840_and_or(client, 0x810, ~0x1, 1); |
| if (state->aud_input != CX25840_AUDIO_SERIAL) { |
| cx25840_and_or(client, 0x803, ~0x10, 0); |
| cx25840_write(client, 0x8d3, 0x1f); |
| } |
| retval = set_audclk_freq(client, freq); |
| if (state->aud_input != CX25840_AUDIO_SERIAL) |
| cx25840_and_or(client, 0x803, ~0x10, 0x10); |
| if (!is_cx2583x(state)) |
| cx25840_and_or(client, 0x810, ~0x1, 0); |
| return retval; |
| } |
| |
| static int cx25840_audio_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct v4l2_subdev *sd = to_sd(ctrl); |
| struct cx25840_state *state = to_state(sd); |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_VOLUME: |
| if (state->mute->val) |
| set_volume(client, 0); |
| else |
| set_volume(client, state->volume->val); |
| break; |
| case V4L2_CID_AUDIO_BASS: |
| /* PATH1_EQ_BASS_VOL */ |
| cx25840_and_or(client, 0x8d9, ~0x3f, |
| 48 - (ctrl->val * 48 / 0xffff)); |
| break; |
| case V4L2_CID_AUDIO_TREBLE: |
| /* PATH1_EQ_TREBLE_VOL */ |
| cx25840_and_or(client, 0x8db, ~0x3f, |
| 48 - (ctrl->val * 48 / 0xffff)); |
| break; |
| case V4L2_CID_AUDIO_BALANCE: |
| set_balance(client, ctrl->val); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops = { |
| .s_ctrl = cx25840_audio_s_ctrl, |
| }; |