| /* |
| * Freescale eSDHC controller driver. |
| * |
| * Copyright (c) 2007 Freescale Semiconductor, Inc. |
| * Copyright (c) 2009 MontaVista Software, Inc. |
| * |
| * Authors: Xiaobo Xie <X.Xie@freescale.com> |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/mmc/host.h> |
| #include "sdhci-of.h" |
| #include "sdhci.h" |
| #include "sdhci-esdhc.h" |
| |
| static u16 esdhc_readw(struct sdhci_host *host, int reg) |
| { |
| u16 ret; |
| |
| if (unlikely(reg == SDHCI_HOST_VERSION)) |
| ret = in_be16(host->ioaddr + reg); |
| else |
| ret = sdhci_be32bs_readw(host, reg); |
| return ret; |
| } |
| |
| static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) |
| { |
| if (reg == SDHCI_BLOCK_SIZE) { |
| /* |
| * Two last DMA bits are reserved, and first one is used for |
| * non-standard blksz of 4096 bytes that we don't support |
| * yet. So clear the DMA boundary bits. |
| */ |
| val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); |
| } |
| sdhci_be32bs_writew(host, val, reg); |
| } |
| |
| static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) |
| { |
| /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ |
| if (reg == SDHCI_HOST_CONTROL) |
| val &= ~ESDHC_HOST_CONTROL_RES; |
| sdhci_be32bs_writeb(host, val, reg); |
| } |
| |
| static int esdhc_of_enable_dma(struct sdhci_host *host) |
| { |
| setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); |
| return 0; |
| } |
| |
| static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host) |
| { |
| struct sdhci_of_host *of_host = sdhci_priv(host); |
| |
| return of_host->clock; |
| } |
| |
| static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host) |
| { |
| struct sdhci_of_host *of_host = sdhci_priv(host); |
| |
| return of_host->clock / 256 / 16; |
| } |
| |
| struct sdhci_of_data sdhci_esdhc = { |
| /* card detection could be handled via GPIO */ |
| .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION, |
| .ops = { |
| .read_l = sdhci_be32bs_readl, |
| .read_w = esdhc_readw, |
| .read_b = sdhci_be32bs_readb, |
| .write_l = sdhci_be32bs_writel, |
| .write_w = esdhc_writew, |
| .write_b = esdhc_writeb, |
| .set_clock = esdhc_set_clock, |
| .enable_dma = esdhc_of_enable_dma, |
| .get_max_clock = esdhc_of_get_max_clock, |
| .get_min_clock = esdhc_of_get_min_clock, |
| }, |
| }; |