| /* |
| * Neuros Technologies OSD2 board support |
| * |
| * Modified from original 644X-EVM board support. |
| * 2008 (c) Neuros Technology, LLC. |
| * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com> |
| * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com> |
| * |
| * The Neuros OSD 2.0 is the hardware component of the Neuros Open |
| * Internet Television Platform. Hardware is very close to TI |
| * DM644X-EVM board. It has: |
| * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, |
| * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. |
| * Additionally realtime clock, IR remote control receiver, |
| * IR Blaster based on MSP430 (firmware although is different |
| * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive |
| * with PATA interface, two muxed red-green leds. |
| * |
| * For more information please refer to |
| * http://wiki.neurostechnology.com/index.php/OSD_2.0_HD |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/mtd/partitions.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| |
| #include <mach/common.h> |
| #include <linux/platform_data/i2c-davinci.h> |
| #include <mach/serial.h> |
| #include <mach/mux.h> |
| #include <linux/platform_data/mtd-davinci.h> |
| #include <linux/platform_data/mmc-davinci.h> |
| #include <linux/platform_data/usb-davinci.h> |
| |
| #include "davinci.h" |
| |
| #define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" |
| #define LXT971_PHY_ID 0x001378e2 |
| #define LXT971_PHY_MASK 0xfffffff0 |
| |
| #define NTOSD2_AUDIOSOC_I2C_ADDR 0x18 |
| #define NTOSD2_MSP430_I2C_ADDR 0x59 |
| #define NTOSD2_MSP430_IRQ 2 |
| |
| /* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA, |
| * 2048 blocks in the device, 64 pages per block, 2048 bytes per |
| * page. |
| */ |
| |
| #define NAND_BLOCK_SIZE SZ_128K |
| |
| static struct mtd_partition davinci_ntosd2_nandflash_partition[] = { |
| { |
| /* UBL (a few copies) plus U-Boot */ |
| .name = "bootloader", |
| .offset = 0, |
| .size = 15 * NAND_BLOCK_SIZE, |
| .mask_flags = MTD_WRITEABLE, /* force read-only */ |
| }, { |
| /* U-Boot environment */ |
| .name = "params", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 1 * NAND_BLOCK_SIZE, |
| .mask_flags = 0, |
| }, { |
| /* Kernel */ |
| .name = "kernel", |
| .offset = MTDPART_OFS_APPEND, |
| .size = SZ_4M, |
| .mask_flags = 0, |
| }, { |
| /* File System */ |
| .name = "filesystem", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| .mask_flags = 0, |
| } |
| /* A few blocks at end hold a flash Bad Block Table. */ |
| }; |
| |
| static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { |
| .parts = davinci_ntosd2_nandflash_partition, |
| .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), |
| .ecc_mode = NAND_ECC_HW, |
| .bbt_options = NAND_BBT_USE_FLASH, |
| }; |
| |
| static struct resource davinci_ntosd2_nandflash_resource[] = { |
| { |
| .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, |
| .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = DM644X_ASYNC_EMIF_CONTROL_BASE, |
| .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device davinci_ntosd2_nandflash_device = { |
| .name = "davinci_nand", |
| .id = 0, |
| .dev = { |
| .platform_data = &davinci_ntosd2_nandflash_data, |
| }, |
| .num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource), |
| .resource = davinci_ntosd2_nandflash_resource, |
| }; |
| |
| static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); |
| |
| static struct platform_device davinci_fb_device = { |
| .name = "davincifb", |
| .id = -1, |
| .dev = { |
| .dma_mask = &davinci_fb_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .num_resources = 0, |
| }; |
| |
| static struct snd_platform_data dm644x_ntosd2_snd_data; |
| |
| static struct gpio_led ntosd2_leds[] = { |
| { .name = "led1_green", .gpio = GPIO(10), }, |
| { .name = "led1_red", .gpio = GPIO(11), }, |
| { .name = "led2_green", .gpio = GPIO(12), }, |
| { .name = "led2_red", .gpio = GPIO(13), }, |
| }; |
| |
| static struct gpio_led_platform_data ntosd2_leds_data = { |
| .num_leds = ARRAY_SIZE(ntosd2_leds), |
| .leds = ntosd2_leds, |
| }; |
| |
| static struct platform_device ntosd2_leds_dev = { |
| .name = "leds-gpio", |
| .id = -1, |
| .dev = { |
| .platform_data = &ntosd2_leds_data, |
| }, |
| }; |
| |
| |
| static struct platform_device *davinci_ntosd2_devices[] __initdata = { |
| &davinci_fb_device, |
| &ntosd2_leds_dev, |
| }; |
| |
| static struct davinci_uart_config uart_config __initdata = { |
| .enabled_uarts = (1 << 0), |
| }; |
| |
| static void __init davinci_ntosd2_map_io(void) |
| { |
| dm644x_init(); |
| } |
| |
| static struct davinci_mmc_config davinci_ntosd2_mmc_config = { |
| .wires = 4, |
| }; |
| |
| |
| #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ |
| defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) |
| #define HAS_ATA 1 |
| #else |
| #define HAS_ATA 0 |
| #endif |
| |
| #if defined(CONFIG_MTD_NAND_DAVINCI) || \ |
| defined(CONFIG_MTD_NAND_DAVINCI_MODULE) |
| #define HAS_NAND 1 |
| #else |
| #define HAS_NAND 0 |
| #endif |
| |
| static __init void davinci_ntosd2_init(void) |
| { |
| struct clk *aemif_clk; |
| struct davinci_soc_info *soc_info = &davinci_soc_info; |
| |
| aemif_clk = clk_get(NULL, "aemif"); |
| clk_prepare_enable(aemif_clk); |
| |
| if (HAS_ATA) { |
| if (HAS_NAND) |
| pr_warning("WARNING: both IDE and Flash are " |
| "enabled, but they share AEMIF pins.\n" |
| "\tDisable IDE for NAND/NOR support.\n"); |
| davinci_init_ide(); |
| } else if (HAS_NAND) { |
| davinci_cfg_reg(DM644X_HPIEN_DISABLE); |
| davinci_cfg_reg(DM644X_ATAEN_DISABLE); |
| |
| /* only one device will be jumpered and detected */ |
| if (HAS_NAND) |
| platform_device_register( |
| &davinci_ntosd2_nandflash_device); |
| } |
| |
| platform_add_devices(davinci_ntosd2_devices, |
| ARRAY_SIZE(davinci_ntosd2_devices)); |
| |
| davinci_serial_init(&uart_config); |
| dm644x_init_asp(&dm644x_ntosd2_snd_data); |
| |
| soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID; |
| |
| davinci_setup_usb(1000, 8); |
| /* |
| * Mux the pins to be GPIOs, VLYNQEN is already done at startup. |
| * The AEAWx are five new AEAW pins that can be muxed by separately. |
| * They are a bitmask for GPIO management. According TI |
| * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ |
| * gpio(10,11,12,13) for leds any combination of bits works except |
| * four last. So we are to reset all five. |
| */ |
| davinci_cfg_reg(DM644X_AEAW0); |
| davinci_cfg_reg(DM644X_AEAW1); |
| davinci_cfg_reg(DM644X_AEAW2); |
| davinci_cfg_reg(DM644X_AEAW3); |
| davinci_cfg_reg(DM644X_AEAW4); |
| |
| davinci_setup_mmc(0, &davinci_ntosd2_mmc_config); |
| } |
| |
| MACHINE_START(NEUROS_OSD2, "Neuros OSD2") |
| /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ |
| .atag_offset = 0x100, |
| .map_io = davinci_ntosd2_map_io, |
| .init_irq = davinci_irq_init, |
| .init_time = davinci_timer_init, |
| .init_machine = davinci_ntosd2_init, |
| .init_late = davinci_init_late, |
| .dma_zone_size = SZ_128M, |
| .restart = davinci_restart, |
| MACHINE_END |