| /* |
| * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c |
| * |
| * Setup pointers to hardware-dependent routines. |
| * Copyright (C) 2000-2001 Toshiba Corporation |
| * |
| * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the |
| * terms of the GNU General Public License version 2. This program is |
| * licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| * |
| * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) |
| */ |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/console.h> |
| #include <linux/pci.h> |
| #include <linux/pm.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| |
| #include <asm/wbflush.h> |
| #include <asm/reboot.h> |
| #include <asm/irq.h> |
| #include <asm/time.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/bootinfo.h> |
| #include <asm/tx4938/rbtx4938.h> |
| #ifdef CONFIG_SERIAL_TXX9 |
| #include <linux/tty.h> |
| #include <linux/serial.h> |
| #include <linux/serial_core.h> |
| #endif |
| #include <linux/spi/spi.h> |
| #include <asm/tx4938/spi.h> |
| #include <asm/gpio.h> |
| |
| extern char * __init prom_getcmdline(void); |
| static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); |
| |
| /* These functions are used for rebooting or halting the machine*/ |
| extern void rbtx4938_machine_restart(char *command); |
| extern void rbtx4938_machine_halt(void); |
| extern void rbtx4938_machine_power_off(void); |
| |
| /* clocks */ |
| unsigned int txx9_master_clock; |
| unsigned int txx9_cpu_clock; |
| unsigned int txx9_gbus_clock; |
| |
| unsigned long rbtx4938_ce_base[8]; |
| unsigned long rbtx4938_ce_size[8]; |
| int txboard_pci66_mode; |
| static int tx4938_pcic_trdyto; /* default: disabled */ |
| static int tx4938_pcic_retryto; /* default: disabled */ |
| static int tx4938_ccfg_toeon = 1; |
| |
| struct tx4938_pcic_reg *pcicptrs[4] = { |
| tx4938_pcicptr /* default setting for TX4938 */ |
| }; |
| |
| static struct { |
| unsigned long base; |
| unsigned long size; |
| } phys_regions[16] __initdata; |
| static int num_phys_regions __initdata; |
| |
| #define PHYS_REGION_MINSIZE 0x10000 |
| |
| void rbtx4938_machine_halt(void) |
| { |
| printk(KERN_NOTICE "System Halted\n"); |
| local_irq_disable(); |
| |
| while (1) |
| __asm__(".set\tmips3\n\t" |
| "wait\n\t" |
| ".set\tmips0"); |
| } |
| |
| void rbtx4938_machine_power_off(void) |
| { |
| rbtx4938_machine_halt(); |
| /* no return */ |
| } |
| |
| void rbtx4938_machine_restart(char *command) |
| { |
| local_irq_disable(); |
| |
| printk("Rebooting..."); |
| *rbtx4938_softresetlock_ptr = 1; |
| *rbtx4938_sfvol_ptr = 1; |
| *rbtx4938_softreset_ptr = 1; |
| wbflush(); |
| |
| while(1); |
| } |
| |
| void __init |
| txboard_add_phys_region(unsigned long base, unsigned long size) |
| { |
| if (num_phys_regions >= ARRAY_SIZE(phys_regions)) { |
| printk("phys_region overflow\n"); |
| return; |
| } |
| phys_regions[num_phys_regions].base = base; |
| phys_regions[num_phys_regions].size = size; |
| num_phys_regions++; |
| } |
| unsigned long __init |
| txboard_find_free_phys_region(unsigned long begin, unsigned long end, |
| unsigned long size) |
| { |
| unsigned long base; |
| int i; |
| |
| for (base = begin / size * size; base < end; base += size) { |
| for (i = 0; i < num_phys_regions; i++) { |
| if (phys_regions[i].size && |
| base <= phys_regions[i].base + (phys_regions[i].size - 1) && |
| base + (size - 1) >= phys_regions[i].base) |
| break; |
| } |
| if (i == num_phys_regions) |
| return base; |
| } |
| return 0; |
| } |
| unsigned long __init |
| txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end, |
| unsigned long *size) |
| { |
| unsigned long sz, base; |
| for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) { |
| base = txboard_find_free_phys_region(begin, end, sz); |
| if (base) { |
| *size = sz; |
| return base; |
| } |
| } |
| return 0; |
| } |
| unsigned long __init |
| txboard_request_phys_region_range(unsigned long begin, unsigned long end, |
| unsigned long size) |
| { |
| unsigned long base; |
| base = txboard_find_free_phys_region(begin, end, size); |
| if (base) |
| txboard_add_phys_region(base, size); |
| return base; |
| } |
| unsigned long __init |
| txboard_request_phys_region(unsigned long size) |
| { |
| unsigned long base; |
| unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ |
| base = txboard_find_free_phys_region(begin, end, size); |
| if (base) |
| txboard_add_phys_region(base, size); |
| return base; |
| } |
| unsigned long __init |
| txboard_request_phys_region_shrink(unsigned long *size) |
| { |
| unsigned long base; |
| unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ |
| base = txboard_find_free_phys_region_shrink(begin, end, size); |
| if (base) |
| txboard_add_phys_region(base, *size); |
| return base; |
| } |
| |
| #ifdef CONFIG_PCI |
| void __init |
| tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr, |
| struct pci_controller *channel, |
| unsigned long pci_io_base, |
| int extarb) |
| { |
| int i; |
| |
| /* Disable All Initiator Space */ |
| pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)| |
| TX4938_PCIC_PCICCFG_G2PMEN(1)| |
| TX4938_PCIC_PCICCFG_G2PMEN(2)| |
| TX4938_PCIC_PCICCFG_G2PIOEN); |
| |
| /* GB->PCI mappings */ |
| pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4; |
| pcicptr->g2piogbase = pci_io_base | |
| #ifdef __BIG_ENDIAN |
| TX4938_PCIC_G2PIOGBASE_ECHG |
| #else |
| TX4938_PCIC_G2PIOGBASE_BSDIS |
| #endif |
| ; |
| pcicptr->g2piopbase = 0; |
| for (i = 0; i < 3; i++) { |
| pcicptr->g2pmmask[i] = 0; |
| pcicptr->g2pmgbase[i] = 0; |
| pcicptr->g2pmpbase[i] = 0; |
| } |
| if (channel->mem_resource->end) { |
| pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4; |
| pcicptr->g2pmgbase[0] = channel->mem_resource->start | |
| #ifdef __BIG_ENDIAN |
| TX4938_PCIC_G2PMnGBASE_ECHG |
| #else |
| TX4938_PCIC_G2PMnGBASE_BSDIS |
| #endif |
| ; |
| pcicptr->g2pmpbase[0] = channel->mem_resource->start; |
| } |
| /* PCI->GB mappings (I/O 256B) */ |
| pcicptr->p2giopbase = 0; /* 256B */ |
| pcicptr->p2giogbase = 0; |
| /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ |
| pcicptr->p2gm0plbase = 0; |
| pcicptr->p2gm0pubase = 0; |
| pcicptr->p2gmgbase[0] = 0 | |
| TX4938_PCIC_P2GMnGBASE_TMEMEN | |
| #ifdef __BIG_ENDIAN |
| TX4938_PCIC_P2GMnGBASE_TECHG |
| #else |
| TX4938_PCIC_P2GMnGBASE_TBSDIS |
| #endif |
| ; |
| /* PCI->GB mappings (MEM 16MB) */ |
| pcicptr->p2gm1plbase = 0xffffffff; |
| pcicptr->p2gm1pubase = 0xffffffff; |
| pcicptr->p2gmgbase[1] = 0; |
| /* PCI->GB mappings (MEM 1MB) */ |
| pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */ |
| pcicptr->p2gmgbase[2] = 0; |
| |
| pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK; |
| /* Enable Initiator Memory Space */ |
| if (channel->mem_resource->end) |
| pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0); |
| /* Enable Initiator I/O Space */ |
| if (channel->io_resource->end) |
| pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN; |
| /* Enable Initiator Config */ |
| pcicptr->pciccfg |= |
| TX4938_PCIC_PCICCFG_ICAEN | |
| TX4938_PCIC_PCICCFG_TCAR; |
| |
| /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ |
| pcicptr->pcicfg1 = 0; |
| |
| pcicptr->g2ptocnt &= ~0xffff; |
| |
| if (tx4938_pcic_trdyto >= 0) { |
| pcicptr->g2ptocnt &= ~0xff; |
| pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff); |
| } |
| |
| if (tx4938_pcic_retryto >= 0) { |
| pcicptr->g2ptocnt &= ~0xff00; |
| pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00); |
| } |
| |
| /* Clear All Local Bus Status */ |
| pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL; |
| /* Enable All Local Bus Interrupts */ |
| pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL; |
| /* Clear All Initiator Status */ |
| pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL; |
| /* Enable All Initiator Interrupts */ |
| pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL; |
| /* Clear All PCI Status Error */ |
| pcicptr->pcistatus = |
| (pcicptr->pcistatus & 0x0000ffff) | |
| (TX4938_PCIC_PCISTATUS_ALL << 16); |
| /* Enable All PCI Status Error Interrupts */ |
| pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL; |
| |
| if (!extarb) { |
| /* Reset Bus Arbiter */ |
| pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA; |
| pcicptr->pbabm = 0; |
| /* Enable Bus Arbiter */ |
| pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN; |
| } |
| |
| /* PCIC Int => IRC IRQ16 */ |
| pcicptr->pcicfg2 = |
| (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC; |
| |
| pcicptr->pcistatus = PCI_COMMAND_MASTER | |
| PCI_COMMAND_MEMORY | |
| PCI_COMMAND_PARITY | PCI_COMMAND_SERR; |
| } |
| |
| int __init |
| tx4938_report_pciclk(void) |
| { |
| unsigned long pcode = TX4938_REV_PCODE(); |
| int pciclk = 0; |
| printk("TX%lx PCIC --%s PCICLK:", |
| pcode, |
| (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : ""); |
| if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { |
| |
| switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) { |
| case TX4938_CCFG_PCIDIVMODE_4: |
| pciclk = txx9_cpu_clock / 4; break; |
| case TX4938_CCFG_PCIDIVMODE_4_5: |
| pciclk = txx9_cpu_clock * 2 / 9; break; |
| case TX4938_CCFG_PCIDIVMODE_5: |
| pciclk = txx9_cpu_clock / 5; break; |
| case TX4938_CCFG_PCIDIVMODE_5_5: |
| pciclk = txx9_cpu_clock * 2 / 11; break; |
| case TX4938_CCFG_PCIDIVMODE_8: |
| pciclk = txx9_cpu_clock / 8; break; |
| case TX4938_CCFG_PCIDIVMODE_9: |
| pciclk = txx9_cpu_clock / 9; break; |
| case TX4938_CCFG_PCIDIVMODE_10: |
| pciclk = txx9_cpu_clock / 10; break; |
| case TX4938_CCFG_PCIDIVMODE_11: |
| pciclk = txx9_cpu_clock / 11; break; |
| } |
| printk("Internal(%dMHz)", pciclk / 1000000); |
| } else { |
| printk("External"); |
| pciclk = -1; |
| } |
| printk("\n"); |
| return pciclk; |
| } |
| |
| void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr) |
| { |
| pcicptrs[ch] = pcicptr; |
| } |
| |
| struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch) |
| { |
| return pcicptrs[ch]; |
| } |
| |
| static struct pci_dev *fake_pci_dev(struct pci_controller *hose, |
| int top_bus, int busnr, int devfn) |
| { |
| static struct pci_dev dev; |
| static struct pci_bus bus; |
| |
| dev.sysdata = bus.sysdata = hose; |
| dev.devfn = devfn; |
| bus.number = busnr; |
| bus.ops = hose->pci_ops; |
| bus.parent = NULL; |
| dev.bus = &bus; |
| |
| return &dev; |
| } |
| |
| #define EARLY_PCI_OP(rw, size, type) \ |
| static int early_##rw##_config_##size(struct pci_controller *hose, \ |
| int top_bus, int bus, int devfn, int offset, type value) \ |
| { \ |
| return pci_##rw##_config_##size( \ |
| fake_pci_dev(hose, top_bus, bus, devfn), \ |
| offset, value); \ |
| } |
| |
| EARLY_PCI_OP(read, word, u16 *) |
| |
| int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus) |
| { |
| u32 pci_devfn; |
| unsigned short vid; |
| int devfn_start = 0; |
| int devfn_stop = 0xff; |
| int cap66 = -1; |
| u16 stat; |
| |
| printk("PCI: Checking 66MHz capabilities...\n"); |
| |
| for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) { |
| if (early_read_config_word(hose, top_bus, current_bus, |
| pci_devfn, PCI_VENDOR_ID, |
| &vid) != PCIBIOS_SUCCESSFUL) |
| continue; |
| |
| if (vid == 0xffff) continue; |
| |
| /* check 66MHz capability */ |
| if (cap66 < 0) |
| cap66 = 1; |
| if (cap66) { |
| early_read_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_STATUS, &stat); |
| if (!(stat & PCI_STATUS_66MHZ)) { |
| printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n", |
| current_bus, pci_devfn); |
| cap66 = 0; |
| break; |
| } |
| } |
| } |
| return cap66 > 0; |
| } |
| |
| int __init |
| tx4938_pciclk66_setup(void) |
| { |
| int pciclk; |
| |
| /* Assert M66EN */ |
| tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66; |
| /* Double PCICLK (if possible) */ |
| if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { |
| unsigned int pcidivmode = |
| tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK; |
| switch (pcidivmode) { |
| case TX4938_CCFG_PCIDIVMODE_8: |
| case TX4938_CCFG_PCIDIVMODE_4: |
| pcidivmode = TX4938_CCFG_PCIDIVMODE_4; |
| pciclk = txx9_cpu_clock / 4; |
| break; |
| case TX4938_CCFG_PCIDIVMODE_9: |
| case TX4938_CCFG_PCIDIVMODE_4_5: |
| pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; |
| pciclk = txx9_cpu_clock * 2 / 9; |
| break; |
| case TX4938_CCFG_PCIDIVMODE_10: |
| case TX4938_CCFG_PCIDIVMODE_5: |
| pcidivmode = TX4938_CCFG_PCIDIVMODE_5; |
| pciclk = txx9_cpu_clock / 5; |
| break; |
| case TX4938_CCFG_PCIDIVMODE_11: |
| case TX4938_CCFG_PCIDIVMODE_5_5: |
| default: |
| pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; |
| pciclk = txx9_cpu_clock * 2 / 11; |
| break; |
| } |
| tx4938_ccfgptr->ccfg = |
| (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK) |
| | pcidivmode; |
| printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", |
| (unsigned long)tx4938_ccfgptr->ccfg); |
| } else { |
| pciclk = -1; |
| } |
| return pciclk; |
| } |
| |
| extern struct pci_controller tx4938_pci_controller[]; |
| static int __init tx4938_pcibios_init(void) |
| { |
| unsigned long mem_base[2]; |
| unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */ |
| unsigned long io_base[2]; |
| unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */ |
| /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */ |
| int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); |
| |
| PCIBIOS_MIN_IO = 0x00001000UL; |
| |
| mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); |
| io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); |
| |
| printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", |
| (unsigned short)(tx4938_pcicptr->pciid >> 16), |
| (unsigned short)(tx4938_pcicptr->pciid & 0xffff), |
| (unsigned short)(tx4938_pcicptr->pciccrev & 0xff), |
| extarb ? "External" : "Internal"); |
| |
| /* setup PCI area */ |
| tx4938_pci_controller[0].io_resource->start = io_base[0]; |
| tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1; |
| tx4938_pci_controller[0].mem_resource->start = mem_base[0]; |
| tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1; |
| |
| set_tx4938_pcicptr(0, tx4938_pcicptr); |
| |
| register_pci_controller(&tx4938_pci_controller[0]); |
| |
| if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) { |
| printk("TX4938_CCFG_PCI66 already configured\n"); |
| txboard_pci66_mode = -1; /* already configured */ |
| } |
| |
| /* Reset PCI Bus */ |
| *rbtx4938_pcireset_ptr = 0; |
| /* Reset PCIC */ |
| tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; |
| if (txboard_pci66_mode > 0) |
| tx4938_pciclk66_setup(); |
| mdelay(10); |
| /* clear PCIC reset */ |
| tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; |
| *rbtx4938_pcireset_ptr = 1; |
| wbflush(); |
| tx4938_report_pcic_status1(tx4938_pcicptr); |
| |
| tx4938_report_pciclk(); |
| tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); |
| if (txboard_pci66_mode == 0 && |
| txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { |
| /* Reset PCI Bus */ |
| *rbtx4938_pcireset_ptr = 0; |
| /* Reset PCIC */ |
| tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; |
| tx4938_pciclk66_setup(); |
| mdelay(10); |
| /* clear PCIC reset */ |
| tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; |
| *rbtx4938_pcireset_ptr = 1; |
| wbflush(); |
| /* Reinitialize PCIC */ |
| tx4938_report_pciclk(); |
| tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); |
| } |
| |
| mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]); |
| io_base[1] = txboard_request_phys_region_shrink(&io_size[1]); |
| /* Reset PCIC1 */ |
| tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST; |
| /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ |
| if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD)) |
| tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66; |
| else |
| tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66; |
| mdelay(10); |
| /* clear PCIC1 reset */ |
| tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; |
| tx4938_report_pcic_status1(tx4938_pcic1ptr); |
| |
| printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x", |
| (unsigned short)(tx4938_pcic1ptr->pciid >> 16), |
| (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff), |
| (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff)); |
| printk("%s PCICLK:%dMHz\n", |
| (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "", |
| txx9_gbus_clock / |
| ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) / |
| 1000000); |
| |
| /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */ |
| tx4938_pci_controller[1].io_resource->start = |
| io_base[1] - io_base[0]; |
| tx4938_pci_controller[1].io_resource->end = |
| io_base[1] - io_base[0] + io_size[1] - 1; |
| tx4938_pci_controller[1].mem_resource->start = mem_base[1]; |
| tx4938_pci_controller[1].mem_resource->end = |
| mem_base[1] + mem_size[1] - 1; |
| set_tx4938_pcicptr(1, tx4938_pcic1ptr); |
| |
| register_pci_controller(&tx4938_pci_controller[1]); |
| |
| tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb); |
| |
| /* map ioport 0 to PCI I/O space address 0 */ |
| set_io_port_base(KSEG1 + io_base[0]); |
| |
| return 0; |
| } |
| |
| arch_initcall(tx4938_pcibios_init); |
| |
| #endif /* CONFIG_PCI */ |
| |
| /* SPI support */ |
| |
| /* chip select for SPI devices */ |
| #define SEEPROM1_CS 7 /* PIO7 */ |
| #define SEEPROM2_CS 0 /* IOC */ |
| #define SEEPROM3_CS 1 /* IOC */ |
| #define SRTC_CS 2 /* IOC */ |
| |
| #ifdef CONFIG_PCI |
| static int __init rbtx4938_ethaddr_init(void) |
| { |
| unsigned char dat[17]; |
| unsigned char sum; |
| int i; |
| |
| /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ |
| if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { |
| printk(KERN_ERR "seeprom: read error.\n"); |
| return -ENODEV; |
| } else { |
| if (strcmp(dat, "MAC") != 0) |
| printk(KERN_WARNING "seeprom: bad signature.\n"); |
| for (i = 0, sum = 0; i < sizeof(dat); i++) |
| sum += dat[i]; |
| if (sum) |
| printk(KERN_WARNING "seeprom: bad checksum.\n"); |
| } |
| for (i = 0; i < 2; i++) { |
| unsigned int slot = TX4938_PCIC_IDSEL_AD_TO_SLOT(31 - i); |
| unsigned int id = (1 << 8) | PCI_DEVFN(slot, 0); /* bus 1 */ |
| struct platform_device *pdev; |
| if (!(tx4938_ccfgptr->pcfg & |
| (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) |
| continue; |
| pdev = platform_device_alloc("tc35815-mac", id); |
| if (!pdev || |
| platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || |
| platform_device_add(pdev)) |
| platform_device_put(pdev); |
| } |
| return 0; |
| } |
| device_initcall(rbtx4938_ethaddr_init); |
| #endif /* CONFIG_PCI */ |
| |
| static void __init rbtx4938_spi_setup(void) |
| { |
| /* set SPI_SEL */ |
| tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; |
| /* chip selects for SPI devices */ |
| tx4938_pioptr->dout |= (1 << SEEPROM1_CS); |
| tx4938_pioptr->dir |= (1 << SEEPROM1_CS); |
| } |
| |
| static struct resource rbtx4938_fpga_resource; |
| |
| static char pcode_str[8]; |
| static struct resource tx4938_reg_resource = { |
| .start = TX4938_REG_BASE, |
| .end = TX4938_REG_BASE + TX4938_REG_SIZE, |
| .name = pcode_str, |
| .flags = IORESOURCE_MEM |
| }; |
| |
| void __init tx4938_board_setup(void) |
| { |
| int i; |
| unsigned long divmode; |
| int cpuclk = 0; |
| unsigned long pcode = TX4938_REV_PCODE(); |
| |
| ioport_resource.start = 0x1000; |
| ioport_resource.end = 0xffffffff; |
| iomem_resource.start = 0x1000; |
| iomem_resource.end = 0xffffffff; /* expand to 4GB */ |
| |
| sprintf(pcode_str, "TX%lx", pcode); |
| /* SDRAMC,EBUSC are configured by PROM */ |
| for (i = 0; i < 8; i++) { |
| if (!(tx4938_ebuscptr->cr[i] & 0x8)) |
| continue; /* disabled */ |
| rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); |
| txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); |
| } |
| |
| /* clocks */ |
| if (txx9_master_clock) { |
| /* calculate gbus_clock and cpu_clock_freq from master_clock */ |
| divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; |
| switch (divmode) { |
| case TX4938_CCFG_DIVMODE_8: |
| case TX4938_CCFG_DIVMODE_10: |
| case TX4938_CCFG_DIVMODE_12: |
| case TX4938_CCFG_DIVMODE_16: |
| case TX4938_CCFG_DIVMODE_18: |
| txx9_gbus_clock = txx9_master_clock * 4; break; |
| default: |
| txx9_gbus_clock = txx9_master_clock; |
| } |
| switch (divmode) { |
| case TX4938_CCFG_DIVMODE_2: |
| case TX4938_CCFG_DIVMODE_8: |
| cpuclk = txx9_gbus_clock * 2; break; |
| case TX4938_CCFG_DIVMODE_2_5: |
| case TX4938_CCFG_DIVMODE_10: |
| cpuclk = txx9_gbus_clock * 5 / 2; break; |
| case TX4938_CCFG_DIVMODE_3: |
| case TX4938_CCFG_DIVMODE_12: |
| cpuclk = txx9_gbus_clock * 3; break; |
| case TX4938_CCFG_DIVMODE_4: |
| case TX4938_CCFG_DIVMODE_16: |
| cpuclk = txx9_gbus_clock * 4; break; |
| case TX4938_CCFG_DIVMODE_4_5: |
| case TX4938_CCFG_DIVMODE_18: |
| cpuclk = txx9_gbus_clock * 9 / 2; break; |
| } |
| txx9_cpu_clock = cpuclk; |
| } else { |
| if (txx9_cpu_clock == 0) { |
| txx9_cpu_clock = 300000000; /* 300MHz */ |
| } |
| /* calculate gbus_clock and master_clock from cpu_clock_freq */ |
| cpuclk = txx9_cpu_clock; |
| divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; |
| switch (divmode) { |
| case TX4938_CCFG_DIVMODE_2: |
| case TX4938_CCFG_DIVMODE_8: |
| txx9_gbus_clock = cpuclk / 2; break; |
| case TX4938_CCFG_DIVMODE_2_5: |
| case TX4938_CCFG_DIVMODE_10: |
| txx9_gbus_clock = cpuclk * 2 / 5; break; |
| case TX4938_CCFG_DIVMODE_3: |
| case TX4938_CCFG_DIVMODE_12: |
| txx9_gbus_clock = cpuclk / 3; break; |
| case TX4938_CCFG_DIVMODE_4: |
| case TX4938_CCFG_DIVMODE_16: |
| txx9_gbus_clock = cpuclk / 4; break; |
| case TX4938_CCFG_DIVMODE_4_5: |
| case TX4938_CCFG_DIVMODE_18: |
| txx9_gbus_clock = cpuclk * 2 / 9; break; |
| } |
| switch (divmode) { |
| case TX4938_CCFG_DIVMODE_8: |
| case TX4938_CCFG_DIVMODE_10: |
| case TX4938_CCFG_DIVMODE_12: |
| case TX4938_CCFG_DIVMODE_16: |
| case TX4938_CCFG_DIVMODE_18: |
| txx9_master_clock = txx9_gbus_clock / 4; break; |
| default: |
| txx9_master_clock = txx9_gbus_clock; |
| } |
| } |
| /* change default value to udelay/mdelay take reasonable time */ |
| loops_per_jiffy = txx9_cpu_clock / HZ / 2; |
| |
| /* CCFG */ |
| /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ |
| tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; |
| /* clear PCIC1 reset */ |
| if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) |
| tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; |
| |
| /* enable Timeout BusError */ |
| if (tx4938_ccfg_toeon) |
| tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE; |
| |
| /* DMA selection */ |
| tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL; |
| |
| /* Use external clock for external arbiter */ |
| if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB)) |
| tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL; |
| |
| printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n", |
| pcode_str, |
| cpuclk / 1000000, txx9_master_clock / 1000000, |
| (unsigned long)tx4938_ccfgptr->crir, |
| tx4938_ccfgptr->ccfg, |
| tx4938_ccfgptr->pcfg); |
| |
| printk("%s SDRAMC --", pcode_str); |
| for (i = 0; i < 4; i++) { |
| unsigned long long cr = tx4938_sdramcptr->cr[i]; |
| unsigned long ram_base, ram_size; |
| if (!((unsigned long)cr & 0x00000400)) |
| continue; /* disabled */ |
| ram_base = (unsigned long)(cr >> 49) << 21; |
| ram_size = ((unsigned long)(cr >> 33) + 1) << 21; |
| if (ram_base >= 0x20000000) |
| continue; /* high memory (ignore) */ |
| printk(" CR%d:%016Lx", i, cr); |
| txboard_add_phys_region(ram_base, ram_size); |
| } |
| printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); |
| |
| /* SRAM */ |
| if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) { |
| unsigned int size = 0x800; |
| unsigned long base = |
| (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); |
| txboard_add_phys_region(base, size); |
| } |
| |
| /* TMR */ |
| /* disable all timers */ |
| for (i = 0; i < TX4938_NR_TMR; i++) { |
| tx4938_tmrptr(i)->tcr = 0x00000020; |
| tx4938_tmrptr(i)->tisr = 0; |
| tx4938_tmrptr(i)->cpra = 0xffffffff; |
| tx4938_tmrptr(i)->itmr = 0; |
| tx4938_tmrptr(i)->ccdr = 0; |
| tx4938_tmrptr(i)->pgmr = 0; |
| } |
| |
| /* enable DMA */ |
| TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN); |
| TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN); |
| |
| /* PIO */ |
| tx4938_pioptr->maskcpu = 0; |
| tx4938_pioptr->maskext = 0; |
| |
| /* TX4938 internal registers */ |
| if (request_resource(&iomem_resource, &tx4938_reg_resource)) |
| printk("request resource for internal registers failed\n"); |
| } |
| |
| #ifdef CONFIG_PCI |
| static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr) |
| { |
| unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16); |
| unsigned long g2pstatus = pcicptr->g2pstatus; |
| unsigned long pcicstatus = pcicptr->pcicstatus; |
| static struct { |
| unsigned long flag; |
| const char *str; |
| } pcistat_tbl[] = { |
| { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, |
| { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, |
| { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, |
| { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, |
| { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, |
| { PCI_STATUS_PARITY, "MasterParityError" }, |
| }, g2pstat_tbl[] = { |
| { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" }, |
| { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" }, |
| }, pcicstat_tbl[] = { |
| { TX4938_PCIC_PCICSTATUS_PME, "PME" }, |
| { TX4938_PCIC_PCICSTATUS_TLB, "TLB" }, |
| { TX4938_PCIC_PCICSTATUS_NIB, "NIB" }, |
| { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" }, |
| { TX4938_PCIC_PCICSTATUS_PERR, "PERR" }, |
| { TX4938_PCIC_PCICSTATUS_SERR, "SERR" }, |
| { TX4938_PCIC_PCICSTATUS_GBE, "GBE" }, |
| { TX4938_PCIC_PCICSTATUS_IWB, "IWB" }, |
| }; |
| int i; |
| |
| printk("pcistat:%04x(", pcistatus); |
| for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++) |
| if (pcistatus & pcistat_tbl[i].flag) |
| printk("%s ", pcistat_tbl[i].str); |
| printk("), g2pstatus:%08lx(", g2pstatus); |
| for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) |
| if (g2pstatus & g2pstat_tbl[i].flag) |
| printk("%s ", g2pstat_tbl[i].str); |
| printk("), pcicstatus:%08lx(", pcicstatus); |
| for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) |
| if (pcicstatus & pcicstat_tbl[i].flag) |
| printk("%s ", pcicstat_tbl[i].str); |
| printk(")\n"); |
| } |
| |
| void tx4938_report_pcic_status(void) |
| { |
| int i; |
| struct tx4938_pcic_reg *pcicptr; |
| for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++) |
| tx4938_report_pcic_status1(pcicptr); |
| } |
| |
| #endif /* CONFIG_PCI */ |
| |
| /* We use onchip r4k counter or TMR timer as our system wide timer |
| * interrupt running at 100HZ. */ |
| |
| void __init plat_time_init(void) |
| { |
| mips_hpt_frequency = txx9_cpu_clock / 2; |
| } |
| |
| void __init toshiba_rbtx4938_setup(void) |
| { |
| unsigned long long pcfg; |
| char *argptr; |
| |
| iomem_resource.end = 0xffffffff; /* 4GB */ |
| |
| if (txx9_master_clock == 0) |
| txx9_master_clock = 25000000; /* 25MHz */ |
| tx4938_board_setup(); |
| /* setup serial stuff */ |
| TX4938_WR(0xff1ff314, 0x00000000); /* h/w flow control off */ |
| TX4938_WR(0xff1ff414, 0x00000000); /* h/w flow control off */ |
| |
| #ifndef CONFIG_PCI |
| set_io_port_base(RBTX4938_ETHER_BASE); |
| #endif |
| |
| #ifdef CONFIG_SERIAL_TXX9 |
| { |
| extern int early_serial_txx9_setup(struct uart_port *port); |
| int i; |
| struct uart_port req; |
| for(i = 0; i < 2; i++) { |
| memset(&req, 0, sizeof(req)); |
| req.line = i; |
| req.iotype = UPIO_MEM; |
| req.membase = (char *)(0xff1ff300 + i * 0x100); |
| req.mapbase = 0xff1ff300 + i * 0x100; |
| req.irq = RBTX4938_IRQ_IRC_SIO(i); |
| req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; |
| req.uartclk = 50000000; |
| early_serial_txx9_setup(&req); |
| } |
| } |
| #ifdef CONFIG_SERIAL_TXX9_CONSOLE |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "console=") == NULL) { |
| strcat(argptr, " console=ttyS0,38400"); |
| } |
| #endif |
| #endif |
| |
| #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 |
| printk("PIOSEL: disabling both ata and nand selection\n"); |
| local_irq_disable(); |
| tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); |
| #endif |
| |
| #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND |
| printk("PIOSEL: enabling nand selection\n"); |
| tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL; |
| tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL; |
| #endif |
| |
| #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA |
| printk("PIOSEL: enabling ata selection\n"); |
| tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL; |
| tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL; |
| #endif |
| |
| #ifdef CONFIG_IP_PNP |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "ip=") == NULL) { |
| strcat(argptr, " ip=any"); |
| } |
| #endif |
| |
| |
| #ifdef CONFIG_FB |
| { |
| conswitchp = &dummy_con; |
| } |
| #endif |
| |
| rbtx4938_spi_setup(); |
| pcfg = tx4938_ccfgptr->pcfg; /* updated */ |
| /* fixup piosel */ |
| if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == |
| TX4938_PCFG_ATA_SEL) { |
| *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x04; |
| } |
| else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == |
| TX4938_PCFG_NDF_SEL) { |
| *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x08; |
| } |
| else { |
| *rbtx4938_piosel_ptr &= ~(0x08 | 0x04); |
| } |
| |
| rbtx4938_fpga_resource.name = "FPGA Registers"; |
| rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); |
| rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; |
| rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; |
| if (request_resource(&iomem_resource, &rbtx4938_fpga_resource)) |
| printk("request resource for fpga failed\n"); |
| |
| /* disable all OnBoard I/O interrupts */ |
| *rbtx4938_imask_ptr = 0; |
| |
| _machine_restart = rbtx4938_machine_restart; |
| _machine_halt = rbtx4938_machine_halt; |
| pm_power_off = rbtx4938_machine_power_off; |
| |
| *rbtx4938_led_ptr = 0xff; |
| printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr); |
| printk(" DIPSW:%02x,%02x\n", |
| *rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr); |
| } |
| |
| static int __init rbtx4938_ne_init(void) |
| { |
| struct resource res[] = { |
| { |
| .start = RBTX4938_RTL_8019_BASE, |
| .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, |
| .flags = IORESOURCE_IO, |
| }, { |
| .start = RBTX4938_RTL_8019_IRQ, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| struct platform_device *dev = |
| platform_device_register_simple("ne", -1, |
| res, ARRAY_SIZE(res)); |
| return IS_ERR(dev) ? PTR_ERR(dev) : 0; |
| } |
| device_initcall(rbtx4938_ne_init); |
| |
| /* GPIO support */ |
| |
| static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); |
| |
| static void rbtx4938_spi_gpio_set(unsigned gpio, int value) |
| { |
| u8 val; |
| unsigned long flags; |
| gpio -= 16; |
| spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); |
| val = *rbtx4938_spics_ptr; |
| if (value) |
| val |= 1 << gpio; |
| else |
| val &= ~(1 << gpio); |
| *rbtx4938_spics_ptr = val; |
| mmiowb(); |
| spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); |
| } |
| |
| static int rbtx4938_spi_gpio_dir_out(unsigned gpio, int value) |
| { |
| rbtx4938_spi_gpio_set(gpio, value); |
| return 0; |
| } |
| |
| static DEFINE_SPINLOCK(tx4938_gpio_lock); |
| |
| static int tx4938_gpio_get(unsigned gpio) |
| { |
| return tx4938_pioptr->din & (1 << gpio); |
| } |
| |
| static void tx4938_gpio_set_raw(unsigned gpio, int value) |
| { |
| u32 val; |
| val = tx4938_pioptr->dout; |
| if (value) |
| val |= 1 << gpio; |
| else |
| val &= ~(1 << gpio); |
| tx4938_pioptr->dout = val; |
| } |
| |
| static void tx4938_gpio_set(unsigned gpio, int value) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&tx4938_gpio_lock, flags); |
| tx4938_gpio_set_raw(gpio, value); |
| mmiowb(); |
| spin_unlock_irqrestore(&tx4938_gpio_lock, flags); |
| } |
| |
| static int tx4938_gpio_dir_in(unsigned gpio) |
| { |
| spin_lock_irq(&tx4938_gpio_lock); |
| tx4938_pioptr->dir &= ~(1 << gpio); |
| mmiowb(); |
| spin_unlock_irq(&tx4938_gpio_lock); |
| return 0; |
| } |
| |
| static int tx4938_gpio_dir_out(unsigned int gpio, int value) |
| { |
| spin_lock_irq(&tx4938_gpio_lock); |
| tx4938_gpio_set_raw(gpio, value); |
| tx4938_pioptr->dir |= 1 << gpio; |
| mmiowb(); |
| spin_unlock_irq(&tx4938_gpio_lock); |
| return 0; |
| } |
| |
| int gpio_direction_input(unsigned gpio) |
| { |
| if (gpio < 16) |
| return tx4938_gpio_dir_in(gpio); |
| return -EINVAL; |
| } |
| |
| int gpio_direction_output(unsigned gpio, int value) |
| { |
| if (gpio < 16) |
| return tx4938_gpio_dir_out(gpio, value); |
| if (gpio < 16 + 3) |
| return rbtx4938_spi_gpio_dir_out(gpio, value); |
| return -EINVAL; |
| } |
| |
| int gpio_get_value(unsigned gpio) |
| { |
| if (gpio < 16) |
| return tx4938_gpio_get(gpio); |
| return 0; |
| } |
| |
| void gpio_set_value(unsigned gpio, int value) |
| { |
| if (gpio < 16) |
| tx4938_gpio_set(gpio, value); |
| else |
| rbtx4938_spi_gpio_set(gpio, value); |
| } |
| |
| /* SPI support */ |
| |
| static void __init txx9_spi_init(unsigned long base, int irq) |
| { |
| struct resource res[] = { |
| { |
| .start = base, |
| .end = base + 0x20 - 1, |
| .flags = IORESOURCE_MEM, |
| .parent = &tx4938_reg_resource, |
| }, { |
| .start = irq, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| platform_device_register_simple("spi_txx9", 0, |
| res, ARRAY_SIZE(res)); |
| } |
| |
| static int __init rbtx4938_spi_init(void) |
| { |
| struct spi_board_info srtc_info = { |
| .modalias = "rtc-rs5c348", |
| .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ |
| .bus_num = 0, |
| .chip_select = 16 + SRTC_CS, |
| /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ |
| .mode = SPI_MODE_1 | SPI_CS_HIGH, |
| }; |
| spi_register_board_info(&srtc_info, 1); |
| spi_eeprom_register(SEEPROM1_CS); |
| spi_eeprom_register(16 + SEEPROM2_CS); |
| spi_eeprom_register(16 + SEEPROM3_CS); |
| txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); |
| return 0; |
| } |
| arch_initcall(rbtx4938_spi_init); |
| |
| /* Minimum CLK support */ |
| |
| struct clk *clk_get(struct device *dev, const char *id) |
| { |
| if (!strcmp(id, "spi-baseclk")) |
| return (struct clk *)(txx9_gbus_clock / 2 / 4); |
| return ERR_PTR(-ENOENT); |
| } |
| EXPORT_SYMBOL(clk_get); |
| |
| int clk_enable(struct clk *clk) |
| { |
| return 0; |
| } |
| EXPORT_SYMBOL(clk_enable); |
| |
| void clk_disable(struct clk *clk) |
| { |
| } |
| EXPORT_SYMBOL(clk_disable); |
| |
| unsigned long clk_get_rate(struct clk *clk) |
| { |
| return (unsigned long)clk; |
| } |
| EXPORT_SYMBOL(clk_get_rate); |
| |
| void clk_put(struct clk *clk) |
| { |
| } |
| EXPORT_SYMBOL(clk_put); |