| /* |
| * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $ |
| * |
| * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al. |
| * |
| * Released under GPL |
| */ |
| |
| #ifndef __MTD_MTD_H__ |
| #define __MTD_MTD_H__ |
| |
| #ifndef __KERNEL__ |
| #error This is a kernel header. Perhaps include mtd-user.h instead? |
| #endif |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/uio.h> |
| #include <linux/notifier.h> |
| |
| #include <linux/mtd/compatmac.h> |
| #include <mtd/mtd-abi.h> |
| |
| #define MTD_CHAR_MAJOR 90 |
| #define MTD_BLOCK_MAJOR 31 |
| #define MAX_MTD_DEVICES 16 |
| |
| #define MTD_ERASE_PENDING 0x01 |
| #define MTD_ERASING 0x02 |
| #define MTD_ERASE_SUSPEND 0x04 |
| #define MTD_ERASE_DONE 0x08 |
| #define MTD_ERASE_FAILED 0x10 |
| |
| /* If the erase fails, fail_addr might indicate exactly which block failed. If |
| fail_addr = 0xffffffff, the failure was not at the device level or was not |
| specific to any particular block. */ |
| struct erase_info { |
| struct mtd_info *mtd; |
| u_int32_t addr; |
| u_int32_t len; |
| u_int32_t fail_addr; |
| u_long time; |
| u_long retries; |
| u_int dev; |
| u_int cell; |
| void (*callback) (struct erase_info *self); |
| u_long priv; |
| u_char state; |
| struct erase_info *next; |
| }; |
| |
| struct mtd_erase_region_info { |
| u_int32_t offset; /* At which this region starts, from the beginning of the MTD */ |
| u_int32_t erasesize; /* For this region */ |
| u_int32_t numblocks; /* Number of blocks of erasesize in this region */ |
| }; |
| |
| /* |
| * oob operation modes |
| * |
| * MTD_OOB_PLACE: oob data are placed at the given offset |
| * MTD_OOB_AUTO: oob data are automatically placed at the free areas |
| * which are defined by the ecclayout |
| * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data |
| * is inserted into the data. Thats a raw image of the |
| * flash contents. |
| */ |
| typedef enum { |
| MTD_OOB_PLACE, |
| MTD_OOB_AUTO, |
| MTD_OOB_RAW, |
| } mtd_oob_mode_t; |
| |
| /** |
| * struct mtd_oob_ops - oob operation operands |
| * @mode: operation mode |
| * |
| * @len: number of bytes to write/read. When a data buffer is given |
| * (datbuf != NULL) this is the number of data bytes. When |
| + no data buffer is available this is the number of oob bytes. |
| * |
| * @retlen: number of bytes written/read. When a data buffer is given |
| * (datbuf != NULL) this is the number of data bytes. When |
| + no data buffer is available this is the number of oob bytes. |
| * |
| * @ooblen: number of oob bytes per page |
| * @ooboffs: offset of oob data in the oob area (only relevant when |
| * mode = MTD_OOB_PLACE) |
| * @datbuf: data buffer - if NULL only oob data are read/written |
| * @oobbuf: oob data buffer |
| */ |
| struct mtd_oob_ops { |
| mtd_oob_mode_t mode; |
| size_t len; |
| size_t retlen; |
| size_t ooblen; |
| uint32_t ooboffs; |
| uint8_t *datbuf; |
| uint8_t *oobbuf; |
| }; |
| |
| struct mtd_info { |
| u_char type; |
| u_int32_t flags; |
| u_int32_t size; // Total size of the MTD |
| |
| /* "Major" erase size for the device. Naïve users may take this |
| * to be the only erase size available, or may use the more detailed |
| * information below if they desire |
| */ |
| u_int32_t erasesize; |
| /* Minimal writable flash unit size. In case of NOR flash it is 1 (even |
| * though individual bits can be cleared), in case of NAND flash it is |
| * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR |
| * it is of ECC block size, etc. It is illegal to have writesize = 0. |
| * Any driver registering a struct mtd_info must ensure a writesize of |
| * 1 or larger. |
| */ |
| u_int32_t writesize; |
| |
| u_int32_t oobsize; // Amount of OOB data per block (e.g. 16) |
| u_int32_t ecctype; |
| u_int32_t eccsize; |
| |
| /* |
| * Reuse some of the above unused fields in the case of NOR flash |
| * with configurable programming regions to avoid modifying the |
| * user visible structure layout/size. Only valid when the |
| * MTD_PROGRAM_REGIONS flag is set. |
| * (Maybe we should have an union for those?) |
| */ |
| #define MTD_PROGREGION_CTRLMODE_VALID(mtd) (mtd)->oobsize |
| #define MTD_PROGREGION_CTRLMODE_INVALID(mtd) (mtd)->ecctype |
| |
| // Kernel-only stuff starts here. |
| char *name; |
| int index; |
| |
| /* ecc layout structure pointer - read only ! */ |
| struct nand_ecclayout *ecclayout; |
| |
| /* Data for variable erase regions. If numeraseregions is zero, |
| * it means that the whole device has erasesize as given above. |
| */ |
| int numeraseregions; |
| struct mtd_erase_region_info *eraseregions; |
| |
| /* This really shouldn't be here. It can go away in 2.5 */ |
| u_int32_t bank_size; |
| |
| int (*erase) (struct mtd_info *mtd, struct erase_info *instr); |
| |
| /* This stuff for eXecute-In-Place */ |
| int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); |
| |
| /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ |
| void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); |
| |
| |
| int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); |
| int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); |
| |
| int (*read_oob) (struct mtd_info *mtd, loff_t from, |
| struct mtd_oob_ops *ops); |
| int (*write_oob) (struct mtd_info *mtd, loff_t to, |
| struct mtd_oob_ops *ops); |
| |
| /* |
| * Methods to access the protection register area, present in some |
| * flash devices. The user data is one time programmable but the |
| * factory data is read only. |
| */ |
| int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); |
| int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); |
| int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); |
| int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); |
| int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); |
| int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); |
| |
| /* kvec-based read/write methods. |
| NB: The 'count' parameter is the number of _vectors_, each of |
| which contains an (ofs, len) tuple. |
| */ |
| int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); |
| |
| /* Sync */ |
| void (*sync) (struct mtd_info *mtd); |
| |
| /* Chip-supported device locking */ |
| int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len); |
| int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len); |
| |
| /* Power Management functions */ |
| int (*suspend) (struct mtd_info *mtd); |
| void (*resume) (struct mtd_info *mtd); |
| |
| /* Bad block management functions */ |
| int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); |
| int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); |
| |
| struct notifier_block reboot_notifier; /* default mode before reboot */ |
| |
| /* ECC status information */ |
| struct mtd_ecc_stats ecc_stats; |
| |
| void *priv; |
| |
| struct module *owner; |
| int usecount; |
| }; |
| |
| |
| /* Kernel-side ioctl definitions */ |
| |
| extern int add_mtd_device(struct mtd_info *mtd); |
| extern int del_mtd_device (struct mtd_info *mtd); |
| |
| extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); |
| |
| extern void put_mtd_device(struct mtd_info *mtd); |
| |
| |
| struct mtd_notifier { |
| void (*add)(struct mtd_info *mtd); |
| void (*remove)(struct mtd_info *mtd); |
| struct list_head list; |
| }; |
| |
| |
| extern void register_mtd_user (struct mtd_notifier *new); |
| extern int unregister_mtd_user (struct mtd_notifier *old); |
| |
| int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, |
| unsigned long count, loff_t to, size_t *retlen); |
| |
| int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, |
| unsigned long count, loff_t from, size_t *retlen); |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| void mtd_erase_callback(struct erase_info *instr); |
| #else |
| static inline void mtd_erase_callback(struct erase_info *instr) |
| { |
| if (instr->callback) |
| instr->callback(instr); |
| } |
| #endif |
| |
| /* |
| * Debugging macro and defines |
| */ |
| #define MTD_DEBUG_LEVEL0 (0) /* Quiet */ |
| #define MTD_DEBUG_LEVEL1 (1) /* Audible */ |
| #define MTD_DEBUG_LEVEL2 (2) /* Loud */ |
| #define MTD_DEBUG_LEVEL3 (3) /* Noisy */ |
| |
| #ifdef CONFIG_MTD_DEBUG |
| #define DEBUG(n, args...) \ |
| do { \ |
| if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ |
| printk(KERN_INFO args); \ |
| } while(0) |
| #else /* CONFIG_MTD_DEBUG */ |
| #define DEBUG(n, args...) do { } while(0) |
| |
| #endif /* CONFIG_MTD_DEBUG */ |
| |
| #endif /* __MTD_MTD_H__ */ |