| /* |
| * cs.c -- Kernel Card Services - core services |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * The initial developer of the original code is David A. Hinds |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| * |
| * (C) 1999 David A. Hinds |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/config.h> |
| #include <linux/string.h> |
| #include <linux/major.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/timer.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/pci.h> |
| #include <linux/device.h> |
| #include <asm/system.h> |
| #include <asm/irq.h> |
| |
| #define IN_CARD_SERVICES |
| #include <pcmcia/version.h> |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/ss.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/bulkmem.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ds.h> |
| #include "cs_internal.h" |
| |
| #ifdef CONFIG_PCI |
| #define PCI_OPT " [pci]" |
| #else |
| #define PCI_OPT "" |
| #endif |
| #ifdef CONFIG_CARDBUS |
| #define CB_OPT " [cardbus]" |
| #else |
| #define CB_OPT "" |
| #endif |
| #ifdef CONFIG_PM |
| #define PM_OPT " [pm]" |
| #else |
| #define PM_OPT "" |
| #endif |
| #if !defined(CONFIG_CARDBUS) && !defined(CONFIG_PCI) && !defined(CONFIG_PM) |
| #define OPTIONS " none" |
| #else |
| #define OPTIONS PCI_OPT CB_OPT PM_OPT |
| #endif |
| |
| static const char *release = "Linux Kernel Card Services"; |
| static const char *options = "options: " OPTIONS; |
| |
| /*====================================================================*/ |
| |
| /* Module parameters */ |
| |
| MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); |
| MODULE_DESCRIPTION("Linux Kernel Card Services\noptions:" OPTIONS); |
| MODULE_LICENSE("GPL"); |
| |
| #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) |
| |
| INT_MODULE_PARM(setup_delay, 10); /* centiseconds */ |
| INT_MODULE_PARM(resume_delay, 20); /* centiseconds */ |
| INT_MODULE_PARM(shutdown_delay, 3); /* centiseconds */ |
| INT_MODULE_PARM(vcc_settle, 40); /* centiseconds */ |
| INT_MODULE_PARM(reset_time, 10); /* usecs */ |
| INT_MODULE_PARM(unreset_delay, 10); /* centiseconds */ |
| INT_MODULE_PARM(unreset_check, 10); /* centiseconds */ |
| INT_MODULE_PARM(unreset_limit, 30); /* unreset_check's */ |
| |
| /* Access speed for attribute memory windows */ |
| INT_MODULE_PARM(cis_speed, 300); /* ns */ |
| |
| /* Access speed for IO windows */ |
| INT_MODULE_PARM(io_speed, 0); /* ns */ |
| |
| #ifdef DEBUG |
| static int pc_debug; |
| |
| module_param(pc_debug, int, 0644); |
| |
| int cs_debug_level(int level) |
| { |
| return pc_debug > level; |
| } |
| #endif |
| |
| /*====================================================================*/ |
| |
| socket_state_t dead_socket = { |
| .csc_mask = SS_DETECT, |
| }; |
| |
| |
| /* List of all sockets, protected by a rwsem */ |
| LIST_HEAD(pcmcia_socket_list); |
| DECLARE_RWSEM(pcmcia_socket_list_rwsem); |
| EXPORT_SYMBOL(pcmcia_socket_list); |
| EXPORT_SYMBOL(pcmcia_socket_list_rwsem); |
| |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| /* mask ofIRQs already reserved by other cards, we should avoid using them */ |
| static u8 pcmcia_used_irq[NR_IRQS]; |
| #endif |
| |
| /*==================================================================== |
| |
| Low-level PC Card interface drivers need to register with Card |
| Services using these calls. |
| |
| ======================================================================*/ |
| |
| /** |
| * socket drivers are expected to use the following callbacks in their |
| * .drv struct: |
| * - pcmcia_socket_dev_suspend |
| * - pcmcia_socket_dev_resume |
| * These functions check for the appropriate struct pcmcia_soket arrays, |
| * and pass them to the low-level functions pcmcia_{suspend,resume}_socket |
| */ |
| static int socket_resume(struct pcmcia_socket *skt); |
| static int socket_suspend(struct pcmcia_socket *skt); |
| |
| int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state) |
| { |
| struct pcmcia_socket *socket; |
| |
| down_read(&pcmcia_socket_list_rwsem); |
| list_for_each_entry(socket, &pcmcia_socket_list, socket_list) { |
| if (socket->dev.dev != dev) |
| continue; |
| down(&socket->skt_sem); |
| socket_suspend(socket); |
| up(&socket->skt_sem); |
| } |
| up_read(&pcmcia_socket_list_rwsem); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pcmcia_socket_dev_suspend); |
| |
| int pcmcia_socket_dev_resume(struct device *dev) |
| { |
| struct pcmcia_socket *socket; |
| |
| down_read(&pcmcia_socket_list_rwsem); |
| list_for_each_entry(socket, &pcmcia_socket_list, socket_list) { |
| if (socket->dev.dev != dev) |
| continue; |
| down(&socket->skt_sem); |
| socket_resume(socket); |
| up(&socket->skt_sem); |
| } |
| up_read(&pcmcia_socket_list_rwsem); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pcmcia_socket_dev_resume); |
| |
| |
| struct pcmcia_socket * pcmcia_get_socket(struct pcmcia_socket *skt) |
| { |
| struct class_device *cl_dev = class_device_get(&skt->dev); |
| if (!cl_dev) |
| return NULL; |
| skt = class_get_devdata(cl_dev); |
| if (!try_module_get(skt->owner)) { |
| class_device_put(&skt->dev); |
| return NULL; |
| } |
| return (skt); |
| } |
| EXPORT_SYMBOL(pcmcia_get_socket); |
| |
| |
| void pcmcia_put_socket(struct pcmcia_socket *skt) |
| { |
| module_put(skt->owner); |
| class_device_put(&skt->dev); |
| } |
| EXPORT_SYMBOL(pcmcia_put_socket); |
| |
| |
| static void pcmcia_release_socket(struct class_device *class_dev) |
| { |
| struct pcmcia_socket *socket = class_get_devdata(class_dev); |
| |
| complete(&socket->socket_released); |
| } |
| |
| static int pccardd(void *__skt); |
| |
| /** |
| * pcmcia_register_socket - add a new pcmcia socket device |
| */ |
| int pcmcia_register_socket(struct pcmcia_socket *socket) |
| { |
| int ret; |
| |
| if (!socket || !socket->ops || !socket->dev.dev || !socket->resource_ops) |
| return -EINVAL; |
| |
| cs_dbg(socket, 0, "pcmcia_register_socket(0x%p)\n", socket->ops); |
| |
| spin_lock_init(&socket->lock); |
| |
| if (socket->resource_ops->init) { |
| ret = socket->resource_ops->init(socket); |
| if (ret) |
| return (ret); |
| } |
| |
| /* try to obtain a socket number [yes, it gets ugly if we |
| * register more than 2^sizeof(unsigned int) pcmcia |
| * sockets... but the socket number is deprecated |
| * anyways, so I don't care] */ |
| down_write(&pcmcia_socket_list_rwsem); |
| if (list_empty(&pcmcia_socket_list)) |
| socket->sock = 0; |
| else { |
| unsigned int found, i = 1; |
| struct pcmcia_socket *tmp; |
| do { |
| found = 1; |
| list_for_each_entry(tmp, &pcmcia_socket_list, socket_list) { |
| if (tmp->sock == i) |
| found = 0; |
| } |
| i++; |
| } while (!found); |
| socket->sock = i - 1; |
| } |
| list_add_tail(&socket->socket_list, &pcmcia_socket_list); |
| up_write(&pcmcia_socket_list_rwsem); |
| |
| |
| /* set proper values in socket->dev */ |
| socket->dev.class_data = socket; |
| socket->dev.class = &pcmcia_socket_class; |
| snprintf(socket->dev.class_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock); |
| |
| /* base address = 0, map = 0 */ |
| socket->cis_mem.flags = 0; |
| socket->cis_mem.speed = cis_speed; |
| |
| INIT_LIST_HEAD(&socket->cis_cache); |
| |
| init_completion(&socket->socket_released); |
| init_completion(&socket->thread_done); |
| init_waitqueue_head(&socket->thread_wait); |
| init_MUTEX(&socket->skt_sem); |
| spin_lock_init(&socket->thread_lock); |
| |
| ret = kernel_thread(pccardd, socket, CLONE_KERNEL); |
| if (ret < 0) |
| goto err; |
| |
| wait_for_completion(&socket->thread_done); |
| if(!socket->thread) { |
| printk(KERN_WARNING "PCMCIA: warning: socket thread for socket %p did not start\n", socket); |
| return -EIO; |
| } |
| pcmcia_parse_events(socket, SS_DETECT); |
| |
| return 0; |
| |
| err: |
| down_write(&pcmcia_socket_list_rwsem); |
| list_del(&socket->socket_list); |
| up_write(&pcmcia_socket_list_rwsem); |
| return ret; |
| } /* pcmcia_register_socket */ |
| EXPORT_SYMBOL(pcmcia_register_socket); |
| |
| |
| /** |
| * pcmcia_unregister_socket - remove a pcmcia socket device |
| */ |
| void pcmcia_unregister_socket(struct pcmcia_socket *socket) |
| { |
| if (!socket) |
| return; |
| |
| cs_dbg(socket, 0, "pcmcia_unregister_socket(0x%p)\n", socket->ops); |
| |
| if (socket->thread) { |
| init_completion(&socket->thread_done); |
| socket->thread = NULL; |
| wake_up(&socket->thread_wait); |
| wait_for_completion(&socket->thread_done); |
| } |
| release_cis_mem(socket); |
| |
| /* remove from our own list */ |
| down_write(&pcmcia_socket_list_rwsem); |
| list_del(&socket->socket_list); |
| up_write(&pcmcia_socket_list_rwsem); |
| |
| /* wait for sysfs to drop all references */ |
| release_resource_db(socket); |
| wait_for_completion(&socket->socket_released); |
| } /* pcmcia_unregister_socket */ |
| EXPORT_SYMBOL(pcmcia_unregister_socket); |
| |
| |
| struct pcmcia_socket * pcmcia_get_socket_by_nr(unsigned int nr) |
| { |
| struct pcmcia_socket *s; |
| |
| down_read(&pcmcia_socket_list_rwsem); |
| list_for_each_entry(s, &pcmcia_socket_list, socket_list) |
| if (s->sock == nr) { |
| up_read(&pcmcia_socket_list_rwsem); |
| return s; |
| } |
| up_read(&pcmcia_socket_list_rwsem); |
| |
| return NULL; |
| |
| } |
| EXPORT_SYMBOL(pcmcia_get_socket_by_nr); |
| |
| |
| /*====================================================================== |
| |
| socket_setup() and shutdown_socket() are called by the main event |
| handler when card insertion and removal events are received. |
| socket_setup() turns on socket power and resets the socket, in two stages. |
| shutdown_socket() unconfigures a socket and turns off socket power. |
| |
| ======================================================================*/ |
| |
| static void shutdown_socket(struct pcmcia_socket *s) |
| { |
| cs_dbg(s, 1, "shutdown_socket\n"); |
| |
| /* Blank out the socket state */ |
| s->socket = dead_socket; |
| s->ops->init(s); |
| s->ops->set_socket(s, &s->socket); |
| s->irq.AssignedIRQ = s->irq.Config = 0; |
| s->lock_count = 0; |
| destroy_cis_cache(s); |
| #ifdef CONFIG_CARDBUS |
| cb_free(s); |
| #endif |
| s->functions = 0; |
| if (s->config) { |
| kfree(s->config); |
| s->config = NULL; |
| } |
| |
| { |
| int status; |
| s->ops->get_status(s, &status); |
| if (status & SS_POWERON) { |
| printk(KERN_ERR "PCMCIA: socket %p: *** DANGER *** unable to remove socket power\n", s); |
| } |
| } |
| } /* shutdown_socket */ |
| |
| /*====================================================================== |
| |
| The central event handler. Send_event() sends an event to the |
| 16-bit subsystem, which then calls the relevant device drivers. |
| Parse_events() interprets the event bits from |
| a card status change report. Do_shutdown() handles the high |
| priority stuff associated with a card removal. |
| |
| ======================================================================*/ |
| |
| |
| /* NOTE: send_event needs to be called with skt->sem held. */ |
| |
| static int send_event(struct pcmcia_socket *s, event_t event, int priority) |
| { |
| int ret; |
| |
| if (s->state & SOCKET_CARDBUS) |
| return 0; |
| |
| cs_dbg(s, 1, "send_event(event %d, pri %d, callback 0x%p)\n", |
| event, priority, s->callback); |
| |
| if (!s->callback) |
| return 0; |
| if (!try_module_get(s->callback->owner)) |
| return 0; |
| |
| ret = s->callback->event(s, event, priority); |
| |
| module_put(s->callback->owner); |
| |
| return ret; |
| } |
| |
| static void socket_remove_drivers(struct pcmcia_socket *skt) |
| { |
| cs_dbg(skt, 4, "remove_drivers\n"); |
| |
| send_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); |
| } |
| |
| static void socket_shutdown(struct pcmcia_socket *skt) |
| { |
| cs_dbg(skt, 4, "shutdown\n"); |
| |
| socket_remove_drivers(skt); |
| skt->state &= SOCKET_INUSE|SOCKET_PRESENT; |
| msleep(shutdown_delay * 10); |
| skt->state &= SOCKET_INUSE; |
| shutdown_socket(skt); |
| } |
| |
| static int socket_reset(struct pcmcia_socket *skt) |
| { |
| int status, i; |
| |
| cs_dbg(skt, 4, "reset\n"); |
| |
| skt->socket.flags |= SS_OUTPUT_ENA | SS_RESET; |
| skt->ops->set_socket(skt, &skt->socket); |
| udelay((long)reset_time); |
| |
| skt->socket.flags &= ~SS_RESET; |
| skt->ops->set_socket(skt, &skt->socket); |
| |
| msleep(unreset_delay * 10); |
| for (i = 0; i < unreset_limit; i++) { |
| skt->ops->get_status(skt, &status); |
| |
| if (!(status & SS_DETECT)) |
| return CS_NO_CARD; |
| |
| if (status & SS_READY) |
| return CS_SUCCESS; |
| |
| msleep(unreset_check * 10); |
| } |
| |
| cs_err(skt, "time out after reset.\n"); |
| return CS_GENERAL_FAILURE; |
| } |
| |
| static int socket_setup(struct pcmcia_socket *skt, int initial_delay) |
| { |
| int status, i; |
| |
| cs_dbg(skt, 4, "setup\n"); |
| |
| skt->ops->get_status(skt, &status); |
| if (!(status & SS_DETECT)) |
| return CS_NO_CARD; |
| |
| msleep(initial_delay * 10); |
| |
| for (i = 0; i < 100; i++) { |
| skt->ops->get_status(skt, &status); |
| if (!(status & SS_DETECT)) |
| return CS_NO_CARD; |
| |
| if (!(status & SS_PENDING)) |
| break; |
| |
| msleep(100); |
| } |
| |
| if (status & SS_PENDING) { |
| cs_err(skt, "voltage interrogation timed out.\n"); |
| return CS_GENERAL_FAILURE; |
| } |
| |
| if (status & SS_CARDBUS) { |
| skt->state |= SOCKET_CARDBUS; |
| #ifndef CONFIG_CARDBUS |
| cs_err(skt, "cardbus cards are not supported.\n"); |
| return CS_BAD_TYPE; |
| #endif |
| } |
| |
| /* |
| * Decode the card voltage requirements, and apply power to the card. |
| */ |
| if (status & SS_3VCARD) |
| skt->socket.Vcc = skt->socket.Vpp = 33; |
| else if (!(status & SS_XVCARD)) |
| skt->socket.Vcc = skt->socket.Vpp = 50; |
| else { |
| cs_err(skt, "unsupported voltage key.\n"); |
| return CS_BAD_TYPE; |
| } |
| |
| if (skt->power_hook) |
| skt->power_hook(skt, HOOK_POWER_PRE); |
| |
| skt->socket.flags = 0; |
| skt->ops->set_socket(skt, &skt->socket); |
| |
| /* |
| * Wait "vcc_settle" for the supply to stabilise. |
| */ |
| msleep(vcc_settle * 10); |
| |
| skt->ops->get_status(skt, &status); |
| if (!(status & SS_POWERON)) { |
| cs_err(skt, "unable to apply power.\n"); |
| return CS_BAD_TYPE; |
| } |
| |
| status = socket_reset(skt); |
| |
| if (skt->power_hook) |
| skt->power_hook(skt, HOOK_POWER_POST); |
| |
| return status; |
| } |
| |
| /* |
| * Handle card insertion. Setup the socket, reset the card, |
| * and then tell the rest of PCMCIA that a card is present. |
| */ |
| static int socket_insert(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 4, "insert\n"); |
| |
| if (!cs_socket_get(skt)) |
| return CS_NO_CARD; |
| |
| ret = socket_setup(skt, setup_delay); |
| if (ret == CS_SUCCESS) { |
| skt->state |= SOCKET_PRESENT; |
| #ifdef CONFIG_CARDBUS |
| if (skt->state & SOCKET_CARDBUS) { |
| cb_alloc(skt); |
| skt->state |= SOCKET_CARDBUS_CONFIG; |
| } |
| #endif |
| cs_dbg(skt, 4, "insert done\n"); |
| |
| send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW); |
| } else { |
| socket_shutdown(skt); |
| cs_socket_put(skt); |
| } |
| |
| return ret; |
| } |
| |
| static int socket_suspend(struct pcmcia_socket *skt) |
| { |
| if (skt->state & SOCKET_SUSPEND) |
| return CS_IN_USE; |
| |
| send_event(skt, CS_EVENT_PM_SUSPEND, CS_EVENT_PRI_LOW); |
| skt->socket = dead_socket; |
| skt->ops->set_socket(skt, &skt->socket); |
| if (skt->ops->suspend) |
| skt->ops->suspend(skt); |
| skt->state |= SOCKET_SUSPEND; |
| |
| return CS_SUCCESS; |
| } |
| |
| /* |
| * Resume a socket. If a card is present, verify its CIS against |
| * our cached copy. If they are different, the card has been |
| * replaced, and we need to tell the drivers. |
| */ |
| static int socket_resume(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| if (!(skt->state & SOCKET_SUSPEND)) |
| return CS_IN_USE; |
| |
| skt->socket = dead_socket; |
| skt->ops->init(skt); |
| skt->ops->set_socket(skt, &skt->socket); |
| |
| if (!(skt->state & SOCKET_PRESENT)) { |
| skt->state &= ~SOCKET_SUSPEND; |
| return socket_insert(skt); |
| } |
| |
| ret = socket_setup(skt, resume_delay); |
| if (ret == CS_SUCCESS) { |
| /* |
| * FIXME: need a better check here for cardbus cards. |
| */ |
| if (verify_cis_cache(skt) != 0) { |
| cs_dbg(skt, 4, "cis mismatch - different card\n"); |
| socket_remove_drivers(skt); |
| destroy_cis_cache(skt); |
| /* |
| * Workaround: give DS time to schedule removal. |
| * Remove me once the 100ms delay is eliminated |
| * in ds.c |
| */ |
| msleep(200); |
| send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW); |
| } else { |
| cs_dbg(skt, 4, "cis matches cache\n"); |
| send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); |
| } |
| } else { |
| socket_shutdown(skt); |
| cs_socket_put(skt); |
| } |
| |
| skt->state &= ~SOCKET_SUSPEND; |
| |
| return CS_SUCCESS; |
| } |
| |
| static void socket_remove(struct pcmcia_socket *skt) |
| { |
| socket_shutdown(skt); |
| cs_socket_put(skt); |
| } |
| |
| /* |
| * Process a socket card detect status change. |
| * |
| * If we don't have a card already present, delay the detect event for |
| * about 20ms (to be on the safe side) before reading the socket status. |
| * |
| * Some i82365-based systems send multiple SS_DETECT events during card |
| * insertion, and the "card present" status bit seems to bounce. This |
| * will probably be true with GPIO-based card detection systems after |
| * the product has aged. |
| */ |
| static void socket_detect_change(struct pcmcia_socket *skt) |
| { |
| if (!(skt->state & SOCKET_SUSPEND)) { |
| int status; |
| |
| if (!(skt->state & SOCKET_PRESENT)) |
| msleep(20); |
| |
| skt->ops->get_status(skt, &status); |
| if ((skt->state & SOCKET_PRESENT) && |
| !(status & SS_DETECT)) |
| socket_remove(skt); |
| if (!(skt->state & SOCKET_PRESENT) && |
| (status & SS_DETECT)) |
| socket_insert(skt); |
| } |
| } |
| |
| static int pccardd(void *__skt) |
| { |
| struct pcmcia_socket *skt = __skt; |
| DECLARE_WAITQUEUE(wait, current); |
| int ret; |
| |
| daemonize("pccardd"); |
| |
| skt->thread = current; |
| skt->socket = dead_socket; |
| skt->ops->init(skt); |
| skt->ops->set_socket(skt, &skt->socket); |
| |
| /* register with the device core */ |
| ret = class_device_register(&skt->dev); |
| if (ret) { |
| printk(KERN_WARNING "PCMCIA: unable to register socket 0x%p\n", |
| skt); |
| skt->thread = NULL; |
| complete_and_exit(&skt->thread_done, 0); |
| } |
| complete(&skt->thread_done); |
| |
| add_wait_queue(&skt->thread_wait, &wait); |
| for (;;) { |
| unsigned long flags; |
| unsigned int events; |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&skt->thread_lock, flags); |
| events = skt->thread_events; |
| skt->thread_events = 0; |
| spin_unlock_irqrestore(&skt->thread_lock, flags); |
| |
| if (events) { |
| down(&skt->skt_sem); |
| if (events & SS_DETECT) |
| socket_detect_change(skt); |
| if (events & SS_BATDEAD) |
| send_event(skt, CS_EVENT_BATTERY_DEAD, CS_EVENT_PRI_LOW); |
| if (events & SS_BATWARN) |
| send_event(skt, CS_EVENT_BATTERY_LOW, CS_EVENT_PRI_LOW); |
| if (events & SS_READY) |
| send_event(skt, CS_EVENT_READY_CHANGE, CS_EVENT_PRI_LOW); |
| up(&skt->skt_sem); |
| continue; |
| } |
| |
| schedule(); |
| try_to_freeze(); |
| |
| if (!skt->thread) |
| break; |
| } |
| remove_wait_queue(&skt->thread_wait, &wait); |
| |
| /* remove from the device core */ |
| class_device_unregister(&skt->dev); |
| |
| complete_and_exit(&skt->thread_done, 0); |
| } |
| |
| /* |
| * Yenta (at least) probes interrupts before registering the socket and |
| * starting the handler thread. |
| */ |
| void pcmcia_parse_events(struct pcmcia_socket *s, u_int events) |
| { |
| cs_dbg(s, 4, "parse_events: events %08x\n", events); |
| if (s->thread) { |
| spin_lock(&s->thread_lock); |
| s->thread_events |= events; |
| spin_unlock(&s->thread_lock); |
| |
| wake_up(&s->thread_wait); |
| } |
| } /* pcmcia_parse_events */ |
| |
| |
| /*====================================================================== |
| |
| Special stuff for managing IO windows, because they are scarce. |
| |
| ======================================================================*/ |
| |
| static int alloc_io_space(struct pcmcia_socket *s, u_int attr, ioaddr_t *base, |
| ioaddr_t num, u_int lines) |
| { |
| int i; |
| kio_addr_t try, align; |
| |
| align = (*base) ? (lines ? 1<<lines : 0) : 1; |
| if (align && (align < num)) { |
| if (*base) { |
| cs_dbg(s, 0, "odd IO request: num %#x align %#lx\n", |
| num, align); |
| align = 0; |
| } else |
| while (align && (align < num)) align <<= 1; |
| } |
| if (*base & ~(align-1)) { |
| cs_dbg(s, 0, "odd IO request: base %#x align %#lx\n", |
| *base, align); |
| align = 0; |
| } |
| if ((s->features & SS_CAP_STATIC_MAP) && s->io_offset) { |
| *base = s->io_offset | (*base & 0x0fff); |
| return 0; |
| } |
| /* Check for an already-allocated window that must conflict with |
| what was asked for. It is a hack because it does not catch all |
| potential conflicts, just the most obvious ones. */ |
| for (i = 0; i < MAX_IO_WIN; i++) |
| if ((s->io[i].NumPorts != 0) && |
| ((s->io[i].BasePort & (align-1)) == *base)) |
| return 1; |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (s->io[i].NumPorts == 0) { |
| s->io[i].res = find_io_region(*base, num, align, s); |
| if (s->io[i].res) { |
| s->io[i].Attributes = attr; |
| s->io[i].BasePort = *base = s->io[i].res->start; |
| s->io[i].NumPorts = s->io[i].InUse = num; |
| break; |
| } else |
| return 1; |
| } else if (s->io[i].Attributes != attr) |
| continue; |
| /* Try to extend top of window */ |
| try = s->io[i].BasePort + s->io[i].NumPorts; |
| if ((*base == 0) || (*base == try)) |
| if (adjust_io_region(s->io[i].res, s->io[i].res->start, |
| s->io[i].res->end + num, s) == 0) { |
| *base = try; |
| s->io[i].NumPorts += num; |
| s->io[i].InUse += num; |
| break; |
| } |
| /* Try to extend bottom of window */ |
| try = s->io[i].BasePort - num; |
| if ((*base == 0) || (*base == try)) |
| if (adjust_io_region(s->io[i].res, s->io[i].res->start - num, |
| s->io[i].res->end, s) == 0) { |
| s->io[i].BasePort = *base = try; |
| s->io[i].NumPorts += num; |
| s->io[i].InUse += num; |
| break; |
| } |
| } |
| return (i == MAX_IO_WIN); |
| } /* alloc_io_space */ |
| |
| static void release_io_space(struct pcmcia_socket *s, ioaddr_t base, |
| ioaddr_t num) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if ((s->io[i].BasePort <= base) && |
| (s->io[i].BasePort+s->io[i].NumPorts >= base+num)) { |
| s->io[i].InUse -= num; |
| /* Free the window if no one else is using it */ |
| if (s->io[i].InUse == 0) { |
| s->io[i].NumPorts = 0; |
| release_resource(s->io[i].res); |
| kfree(s->io[i].res); |
| s->io[i].res = NULL; |
| } |
| } |
| } |
| } |
| |
| /*====================================================================== |
| |
| Access_configuration_register() reads and writes configuration |
| registers in attribute memory. Memory window 0 is reserved for |
| this and the tuple reading services. |
| |
| ======================================================================*/ |
| |
| int pccard_access_configuration_register(struct pcmcia_socket *s, |
| unsigned int function, |
| conf_reg_t *reg) |
| { |
| config_t *c; |
| int addr; |
| u_char val; |
| |
| if (!s || !s->config) |
| return CS_NO_CARD; |
| |
| c = &s->config[function]; |
| |
| if (c == NULL) |
| return CS_NO_CARD; |
| |
| if (!(c->state & CONFIG_LOCKED)) |
| return CS_CONFIGURATION_LOCKED; |
| |
| addr = (c->ConfigBase + reg->Offset) >> 1; |
| |
| switch (reg->Action) { |
| case CS_READ: |
| read_cis_mem(s, 1, addr, 1, &val); |
| reg->Value = val; |
| break; |
| case CS_WRITE: |
| val = reg->Value; |
| write_cis_mem(s, 1, addr, 1, &val); |
| break; |
| default: |
| return CS_BAD_ARGS; |
| break; |
| } |
| return CS_SUCCESS; |
| } /* access_configuration_register */ |
| EXPORT_SYMBOL(pccard_access_configuration_register); |
| |
| |
| /*====================================================================*/ |
| |
| int pccard_get_configuration_info(struct pcmcia_socket *s, |
| unsigned int function, |
| config_info_t *config) |
| { |
| config_t *c; |
| |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| |
| config->Function = function; |
| |
| #ifdef CONFIG_CARDBUS |
| if (s->state & SOCKET_CARDBUS) { |
| memset(config, 0, sizeof(config_info_t)); |
| config->Vcc = s->socket.Vcc; |
| config->Vpp1 = config->Vpp2 = s->socket.Vpp; |
| config->Option = s->cb_dev->subordinate->number; |
| if (s->state & SOCKET_CARDBUS_CONFIG) { |
| config->Attributes = CONF_VALID_CLIENT; |
| config->IntType = INT_CARDBUS; |
| config->AssignedIRQ = s->irq.AssignedIRQ; |
| if (config->AssignedIRQ) |
| config->Attributes |= CONF_ENABLE_IRQ; |
| config->BasePort1 = s->io[0].BasePort; |
| config->NumPorts1 = s->io[0].NumPorts; |
| } |
| return CS_SUCCESS; |
| } |
| #endif |
| |
| c = (s->config != NULL) ? &s->config[function] : NULL; |
| |
| if ((c == NULL) || !(c->state & CONFIG_LOCKED)) { |
| config->Attributes = 0; |
| config->Vcc = s->socket.Vcc; |
| config->Vpp1 = config->Vpp2 = s->socket.Vpp; |
| return CS_SUCCESS; |
| } |
| |
| /* !!! This is a hack !!! */ |
| memcpy(&config->Attributes, &c->Attributes, sizeof(config_t)); |
| config->Attributes |= CONF_VALID_CLIENT; |
| config->CardValues = c->CardValues; |
| config->IRQAttributes = c->irq.Attributes; |
| config->AssignedIRQ = s->irq.AssignedIRQ; |
| config->BasePort1 = c->io.BasePort1; |
| config->NumPorts1 = c->io.NumPorts1; |
| config->Attributes1 = c->io.Attributes1; |
| config->BasePort2 = c->io.BasePort2; |
| config->NumPorts2 = c->io.NumPorts2; |
| config->Attributes2 = c->io.Attributes2; |
| config->IOAddrLines = c->io.IOAddrLines; |
| |
| return CS_SUCCESS; |
| } /* get_configuration_info */ |
| EXPORT_SYMBOL(pccard_get_configuration_info); |
| |
| /*====================================================================== |
| |
| Return information about this version of Card Services. |
| |
| ======================================================================*/ |
| |
| int pcmcia_get_card_services_info(servinfo_t *info) |
| { |
| unsigned int socket_count = 0; |
| struct list_head *tmp; |
| info->Signature[0] = 'C'; |
| info->Signature[1] = 'S'; |
| down_read(&pcmcia_socket_list_rwsem); |
| list_for_each(tmp, &pcmcia_socket_list) |
| socket_count++; |
| up_read(&pcmcia_socket_list_rwsem); |
| info->Count = socket_count; |
| info->Revision = CS_RELEASE_CODE; |
| info->CSLevel = 0x0210; |
| info->VendorString = (char *)release; |
| return CS_SUCCESS; |
| } /* get_card_services_info */ |
| |
| |
| /*====================================================================*/ |
| |
| int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *handle, int idx, win_req_t *req) |
| { |
| window_t *win; |
| int w; |
| |
| if (!s || !(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| for (w = idx; w < MAX_WIN; w++) |
| if (s->state & SOCKET_WIN_REQ(w)) break; |
| if (w == MAX_WIN) |
| return CS_NO_MORE_ITEMS; |
| win = &s->win[w]; |
| req->Base = win->ctl.res->start; |
| req->Size = win->ctl.res->end - win->ctl.res->start + 1; |
| req->AccessSpeed = win->ctl.speed; |
| req->Attributes = 0; |
| if (win->ctl.flags & MAP_ATTRIB) |
| req->Attributes |= WIN_MEMORY_TYPE_AM; |
| if (win->ctl.flags & MAP_ACTIVE) |
| req->Attributes |= WIN_ENABLE; |
| if (win->ctl.flags & MAP_16BIT) |
| req->Attributes |= WIN_DATA_WIDTH_16; |
| if (win->ctl.flags & MAP_USE_WAIT) |
| req->Attributes |= WIN_USE_WAIT; |
| *handle = win; |
| return CS_SUCCESS; |
| } /* get_window */ |
| EXPORT_SYMBOL(pcmcia_get_window); |
| |
| /*===================================================================== |
| |
| Return the PCI device associated with a card.. |
| |
| ======================================================================*/ |
| |
| #ifdef CONFIG_CARDBUS |
| |
| struct pci_bus *pcmcia_lookup_bus(struct pcmcia_socket *s) |
| { |
| if (!s || !(s->state & SOCKET_CARDBUS)) |
| return NULL; |
| |
| return s->cb_dev->subordinate; |
| } |
| |
| EXPORT_SYMBOL(pcmcia_lookup_bus); |
| |
| #endif |
| |
| /*====================================================================== |
| |
| Get the current socket state bits. We don't support the latched |
| SocketState yet: I haven't seen any point for it. |
| |
| ======================================================================*/ |
| |
| int pccard_get_status(struct pcmcia_socket *s, unsigned int function, cs_status_t *status) |
| { |
| config_t *c; |
| int val; |
| |
| s->ops->get_status(s, &val); |
| status->CardState = status->SocketState = 0; |
| status->CardState |= (val & SS_DETECT) ? CS_EVENT_CARD_DETECT : 0; |
| status->CardState |= (val & SS_CARDBUS) ? CS_EVENT_CB_DETECT : 0; |
| status->CardState |= (val & SS_3VCARD) ? CS_EVENT_3VCARD : 0; |
| status->CardState |= (val & SS_XVCARD) ? CS_EVENT_XVCARD : 0; |
| if (s->state & SOCKET_SUSPEND) |
| status->CardState |= CS_EVENT_PM_SUSPEND; |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| |
| c = (s->config != NULL) ? &s->config[function] : NULL; |
| if ((c != NULL) && (c->state & CONFIG_LOCKED) && |
| (c->IntType & (INT_MEMORY_AND_IO | INT_ZOOMED_VIDEO))) { |
| u_char reg; |
| if (c->Present & PRESENT_PIN_REPLACE) { |
| read_cis_mem(s, 1, (c->ConfigBase+CISREG_PRR)>>1, 1, ®); |
| status->CardState |= |
| (reg & PRR_WP_STATUS) ? CS_EVENT_WRITE_PROTECT : 0; |
| status->CardState |= |
| (reg & PRR_READY_STATUS) ? CS_EVENT_READY_CHANGE : 0; |
| status->CardState |= |
| (reg & PRR_BVD2_STATUS) ? CS_EVENT_BATTERY_LOW : 0; |
| status->CardState |= |
| (reg & PRR_BVD1_STATUS) ? CS_EVENT_BATTERY_DEAD : 0; |
| } else { |
| /* No PRR? Then assume we're always ready */ |
| status->CardState |= CS_EVENT_READY_CHANGE; |
| } |
| if (c->Present & PRESENT_EXT_STATUS) { |
| read_cis_mem(s, 1, (c->ConfigBase+CISREG_ESR)>>1, 1, ®); |
| status->CardState |= |
| (reg & ESR_REQ_ATTN) ? CS_EVENT_REQUEST_ATTENTION : 0; |
| } |
| return CS_SUCCESS; |
| } |
| status->CardState |= |
| (val & SS_WRPROT) ? CS_EVENT_WRITE_PROTECT : 0; |
| status->CardState |= |
| (val & SS_BATDEAD) ? CS_EVENT_BATTERY_DEAD : 0; |
| status->CardState |= |
| (val & SS_BATWARN) ? CS_EVENT_BATTERY_LOW : 0; |
| status->CardState |= |
| (val & SS_READY) ? CS_EVENT_READY_CHANGE : 0; |
| return CS_SUCCESS; |
| } /* get_status */ |
| EXPORT_SYMBOL(pccard_get_status); |
| |
| /*====================================================================== |
| |
| Change the card address of an already open memory window. |
| |
| ======================================================================*/ |
| |
| int pcmcia_get_mem_page(window_handle_t win, memreq_t *req) |
| { |
| if ((win == NULL) || (win->magic != WINDOW_MAGIC)) |
| return CS_BAD_HANDLE; |
| req->Page = 0; |
| req->CardOffset = win->ctl.card_start; |
| return CS_SUCCESS; |
| } /* get_mem_page */ |
| |
| int pcmcia_map_mem_page(window_handle_t win, memreq_t *req) |
| { |
| struct pcmcia_socket *s; |
| if ((win == NULL) || (win->magic != WINDOW_MAGIC)) |
| return CS_BAD_HANDLE; |
| if (req->Page != 0) |
| return CS_BAD_PAGE; |
| s = win->sock; |
| win->ctl.card_start = req->CardOffset; |
| if (s->ops->set_mem_map(s, &win->ctl) != 0) |
| return CS_BAD_OFFSET; |
| return CS_SUCCESS; |
| } /* map_mem_page */ |
| |
| /*====================================================================== |
| |
| Modify a locked socket configuration |
| |
| ======================================================================*/ |
| |
| int pcmcia_modify_configuration(client_handle_t handle, |
| modconf_t *mod) |
| { |
| struct pcmcia_socket *s; |
| config_t *c; |
| |
| if (CHECK_HANDLE(handle)) |
| return CS_BAD_HANDLE; |
| s = SOCKET(handle); c = CONFIG(handle); |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| if (!(c->state & CONFIG_LOCKED)) |
| return CS_CONFIGURATION_LOCKED; |
| |
| if (mod->Attributes & CONF_IRQ_CHANGE_VALID) { |
| if (mod->Attributes & CONF_ENABLE_IRQ) { |
| c->Attributes |= CONF_ENABLE_IRQ; |
| s->socket.io_irq = s->irq.AssignedIRQ; |
| } else { |
| c->Attributes &= ~CONF_ENABLE_IRQ; |
| s->socket.io_irq = 0; |
| } |
| s->ops->set_socket(s, &s->socket); |
| } |
| |
| if (mod->Attributes & CONF_VCC_CHANGE_VALID) |
| return CS_BAD_VCC; |
| |
| /* We only allow changing Vpp1 and Vpp2 to the same value */ |
| if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && |
| (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { |
| if (mod->Vpp1 != mod->Vpp2) |
| return CS_BAD_VPP; |
| c->Vpp1 = c->Vpp2 = s->socket.Vpp = mod->Vpp1; |
| if (s->ops->set_socket(s, &s->socket)) |
| return CS_BAD_VPP; |
| } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) || |
| (mod->Attributes & CONF_VPP2_CHANGE_VALID)) |
| return CS_BAD_VPP; |
| |
| return CS_SUCCESS; |
| } /* modify_configuration */ |
| |
| /* register pcmcia_callback */ |
| int pccard_register_pcmcia(struct pcmcia_socket *s, struct pcmcia_callback *c) |
| { |
| int ret = 0; |
| |
| /* s->skt_sem also protects s->callback */ |
| down(&s->skt_sem); |
| |
| if (c) { |
| /* registration */ |
| if (s->callback) { |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| s->callback = c; |
| |
| if ((s->state & (SOCKET_PRESENT|SOCKET_CARDBUS)) == SOCKET_PRESENT) |
| send_event(s, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW); |
| } else |
| s->callback = NULL; |
| err: |
| up(&s->skt_sem); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pccard_register_pcmcia); |
| |
| /*====================================================================*/ |
| |
| int pcmcia_release_configuration(client_handle_t handle) |
| { |
| pccard_io_map io = { 0, 0, 0, 0, 1 }; |
| struct pcmcia_socket *s; |
| int i; |
| |
| if (CHECK_HANDLE(handle) || |
| !(handle->state & CLIENT_CONFIG_LOCKED)) |
| return CS_BAD_HANDLE; |
| handle->state &= ~CLIENT_CONFIG_LOCKED; |
| s = SOCKET(handle); |
| |
| #ifdef CONFIG_CARDBUS |
| if (handle->state & CLIENT_CARDBUS) |
| return CS_SUCCESS; |
| #endif |
| |
| if (!(handle->state & CLIENT_STALE)) { |
| config_t *c = CONFIG(handle); |
| if (--(s->lock_count) == 0) { |
| s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */ |
| s->socket.Vpp = 0; |
| s->socket.io_irq = 0; |
| s->ops->set_socket(s, &s->socket); |
| } |
| if (c->state & CONFIG_IO_REQ) |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (s->io[i].NumPorts == 0) |
| continue; |
| s->io[i].Config--; |
| if (s->io[i].Config != 0) |
| continue; |
| io.map = i; |
| s->ops->set_io_map(s, &io); |
| } |
| c->state &= ~CONFIG_LOCKED; |
| } |
| |
| return CS_SUCCESS; |
| } /* release_configuration */ |
| |
| /*====================================================================== |
| |
| Release_io() releases the I/O ranges allocated by a client. This |
| may be invoked some time after a card ejection has already dumped |
| the actual socket configuration, so if the client is "stale", we |
| don't bother checking the port ranges against the current socket |
| values. |
| |
| ======================================================================*/ |
| |
| int pcmcia_release_io(client_handle_t handle, io_req_t *req) |
| { |
| struct pcmcia_socket *s; |
| |
| if (CHECK_HANDLE(handle) || !(handle->state & CLIENT_IO_REQ)) |
| return CS_BAD_HANDLE; |
| handle->state &= ~CLIENT_IO_REQ; |
| s = SOCKET(handle); |
| |
| #ifdef CONFIG_CARDBUS |
| if (handle->state & CLIENT_CARDBUS) |
| return CS_SUCCESS; |
| #endif |
| |
| if (!(handle->state & CLIENT_STALE)) { |
| config_t *c = CONFIG(handle); |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| if ((c->io.BasePort1 != req->BasePort1) || |
| (c->io.NumPorts1 != req->NumPorts1) || |
| (c->io.BasePort2 != req->BasePort2) || |
| (c->io.NumPorts2 != req->NumPorts2)) |
| return CS_BAD_ARGS; |
| c->state &= ~CONFIG_IO_REQ; |
| } |
| |
| release_io_space(s, req->BasePort1, req->NumPorts1); |
| if (req->NumPorts2) |
| release_io_space(s, req->BasePort2, req->NumPorts2); |
| |
| return CS_SUCCESS; |
| } /* release_io */ |
| |
| /*====================================================================*/ |
| |
| int pcmcia_release_irq(client_handle_t handle, irq_req_t *req) |
| { |
| struct pcmcia_socket *s; |
| if (CHECK_HANDLE(handle) || !(handle->state & CLIENT_IRQ_REQ)) |
| return CS_BAD_HANDLE; |
| handle->state &= ~CLIENT_IRQ_REQ; |
| s = SOCKET(handle); |
| |
| if (!(handle->state & CLIENT_STALE)) { |
| config_t *c = CONFIG(handle); |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| if (c->irq.Attributes != req->Attributes) |
| return CS_BAD_ATTRIBUTE; |
| if (s->irq.AssignedIRQ != req->AssignedIRQ) |
| return CS_BAD_IRQ; |
| if (--s->irq.Config == 0) { |
| c->state &= ~CONFIG_IRQ_REQ; |
| s->irq.AssignedIRQ = 0; |
| } |
| } |
| |
| if (req->Attributes & IRQ_HANDLE_PRESENT) { |
| free_irq(req->AssignedIRQ, req->Instance); |
| } |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| pcmcia_used_irq[req->AssignedIRQ]--; |
| #endif |
| |
| return CS_SUCCESS; |
| } /* cs_release_irq */ |
| |
| /*====================================================================*/ |
| |
| int pcmcia_release_window(window_handle_t win) |
| { |
| struct pcmcia_socket *s; |
| |
| if ((win == NULL) || (win->magic != WINDOW_MAGIC)) |
| return CS_BAD_HANDLE; |
| s = win->sock; |
| if (!(win->handle->state & CLIENT_WIN_REQ(win->index))) |
| return CS_BAD_HANDLE; |
| |
| /* Shut down memory window */ |
| win->ctl.flags &= ~MAP_ACTIVE; |
| s->ops->set_mem_map(s, &win->ctl); |
| s->state &= ~SOCKET_WIN_REQ(win->index); |
| |
| /* Release system memory */ |
| if (win->ctl.res) { |
| release_resource(win->ctl.res); |
| kfree(win->ctl.res); |
| win->ctl.res = NULL; |
| } |
| win->handle->state &= ~CLIENT_WIN_REQ(win->index); |
| |
| win->magic = 0; |
| |
| return CS_SUCCESS; |
| } /* release_window */ |
| |
| /*====================================================================*/ |
| |
| int pcmcia_request_configuration(client_handle_t handle, |
| config_req_t *req) |
| { |
| int i; |
| u_int base; |
| struct pcmcia_socket *s; |
| config_t *c; |
| pccard_io_map iomap; |
| |
| if (CHECK_HANDLE(handle)) |
| return CS_BAD_HANDLE; |
| s = SOCKET(handle); |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| |
| #ifdef CONFIG_CARDBUS |
| if (handle->state & CLIENT_CARDBUS) |
| return CS_UNSUPPORTED_MODE; |
| #endif |
| |
| if (req->IntType & INT_CARDBUS) |
| return CS_UNSUPPORTED_MODE; |
| c = CONFIG(handle); |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| |
| /* Do power control. We don't allow changes in Vcc. */ |
| if (s->socket.Vcc != req->Vcc) |
| return CS_BAD_VCC; |
| if (req->Vpp1 != req->Vpp2) |
| return CS_BAD_VPP; |
| s->socket.Vpp = req->Vpp1; |
| if (s->ops->set_socket(s, &s->socket)) |
| return CS_BAD_VPP; |
| |
| c->Vcc = req->Vcc; c->Vpp1 = c->Vpp2 = req->Vpp1; |
| |
| /* Pick memory or I/O card, DMA mode, interrupt */ |
| c->IntType = req->IntType; |
| c->Attributes = req->Attributes; |
| if (req->IntType & INT_MEMORY_AND_IO) |
| s->socket.flags |= SS_IOCARD; |
| if (req->IntType & INT_ZOOMED_VIDEO) |
| s->socket.flags |= SS_ZVCARD | SS_IOCARD; |
| if (req->Attributes & CONF_ENABLE_DMA) |
| s->socket.flags |= SS_DMA_MODE; |
| if (req->Attributes & CONF_ENABLE_SPKR) |
| s->socket.flags |= SS_SPKR_ENA; |
| if (req->Attributes & CONF_ENABLE_IRQ) |
| s->socket.io_irq = s->irq.AssignedIRQ; |
| else |
| s->socket.io_irq = 0; |
| s->ops->set_socket(s, &s->socket); |
| s->lock_count++; |
| |
| /* Set up CIS configuration registers */ |
| base = c->ConfigBase = req->ConfigBase; |
| c->Present = c->CardValues = req->Present; |
| if (req->Present & PRESENT_COPY) { |
| c->Copy = req->Copy; |
| write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &c->Copy); |
| } |
| if (req->Present & PRESENT_OPTION) { |
| if (s->functions == 1) { |
| c->Option = req->ConfigIndex & COR_CONFIG_MASK; |
| } else { |
| c->Option = req->ConfigIndex & COR_MFC_CONFIG_MASK; |
| c->Option |= COR_FUNC_ENA|COR_IREQ_ENA; |
| if (req->Present & PRESENT_IOBASE_0) |
| c->Option |= COR_ADDR_DECODE; |
| } |
| if (c->state & CONFIG_IRQ_REQ) |
| if (!(c->irq.Attributes & IRQ_FORCED_PULSE)) |
| c->Option |= COR_LEVEL_REQ; |
| write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option); |
| mdelay(40); |
| } |
| if (req->Present & PRESENT_STATUS) { |
| c->Status = req->Status; |
| write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status); |
| } |
| if (req->Present & PRESENT_PIN_REPLACE) { |
| c->Pin = req->Pin; |
| write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &c->Pin); |
| } |
| if (req->Present & PRESENT_EXT_STATUS) { |
| c->ExtStatus = req->ExtStatus; |
| write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus); |
| } |
| if (req->Present & PRESENT_IOBASE_0) { |
| u_char b = c->io.BasePort1 & 0xff; |
| write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b); |
| b = (c->io.BasePort1 >> 8) & 0xff; |
| write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b); |
| } |
| if (req->Present & PRESENT_IOSIZE) { |
| u_char b = c->io.NumPorts1 + c->io.NumPorts2 - 1; |
| write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b); |
| } |
| |
| /* Configure I/O windows */ |
| if (c->state & CONFIG_IO_REQ) { |
| iomap.speed = io_speed; |
| for (i = 0; i < MAX_IO_WIN; i++) |
| if (s->io[i].NumPorts != 0) { |
| iomap.map = i; |
| iomap.flags = MAP_ACTIVE; |
| switch (s->io[i].Attributes & IO_DATA_PATH_WIDTH) { |
| case IO_DATA_PATH_WIDTH_16: |
| iomap.flags |= MAP_16BIT; break; |
| case IO_DATA_PATH_WIDTH_AUTO: |
| iomap.flags |= MAP_AUTOSZ; break; |
| default: |
| break; |
| } |
| iomap.start = s->io[i].BasePort; |
| iomap.stop = iomap.start + s->io[i].NumPorts - 1; |
| s->ops->set_io_map(s, &iomap); |
| s->io[i].Config++; |
| } |
| } |
| |
| c->state |= CONFIG_LOCKED; |
| handle->state |= CLIENT_CONFIG_LOCKED; |
| return CS_SUCCESS; |
| } /* request_configuration */ |
| |
| /*====================================================================== |
| |
| Request_io() reserves ranges of port addresses for a socket. |
| I have not implemented range sharing or alias addressing. |
| |
| ======================================================================*/ |
| |
| int pcmcia_request_io(client_handle_t handle, io_req_t *req) |
| { |
| struct pcmcia_socket *s; |
| config_t *c; |
| |
| if (CHECK_HANDLE(handle)) |
| return CS_BAD_HANDLE; |
| s = SOCKET(handle); |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| |
| if (handle->state & CLIENT_CARDBUS) { |
| #ifdef CONFIG_CARDBUS |
| handle->state |= CLIENT_IO_REQ; |
| return CS_SUCCESS; |
| #else |
| return CS_UNSUPPORTED_FUNCTION; |
| #endif |
| } |
| |
| if (!req) |
| return CS_UNSUPPORTED_MODE; |
| c = CONFIG(handle); |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| if (c->state & CONFIG_IO_REQ) |
| return CS_IN_USE; |
| if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)) |
| return CS_BAD_ATTRIBUTE; |
| if ((req->NumPorts2 > 0) && |
| (req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))) |
| return CS_BAD_ATTRIBUTE; |
| |
| if (alloc_io_space(s, req->Attributes1, &req->BasePort1, |
| req->NumPorts1, req->IOAddrLines)) |
| return CS_IN_USE; |
| |
| if (req->NumPorts2) { |
| if (alloc_io_space(s, req->Attributes2, &req->BasePort2, |
| req->NumPorts2, req->IOAddrLines)) { |
| release_io_space(s, req->BasePort1, req->NumPorts1); |
| return CS_IN_USE; |
| } |
| } |
| |
| c->io = *req; |
| c->state |= CONFIG_IO_REQ; |
| handle->state |= CLIENT_IO_REQ; |
| return CS_SUCCESS; |
| } /* request_io */ |
| |
| /*====================================================================== |
| |
| Request_irq() reserves an irq for this client. |
| |
| Also, since Linux only reserves irq's when they are actually |
| hooked, we don't guarantee that an irq will still be available |
| when the configuration is locked. Now that I think about it, |
| there might be a way to fix this using a dummy handler. |
| |
| ======================================================================*/ |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| static irqreturn_t test_action(int cpl, void *dev_id, struct pt_regs *regs) |
| { |
| return IRQ_NONE; |
| } |
| #endif |
| |
| int pcmcia_request_irq(client_handle_t handle, irq_req_t *req) |
| { |
| struct pcmcia_socket *s; |
| config_t *c; |
| int ret = CS_IN_USE, irq = 0; |
| struct pcmcia_device *p_dev = handle_to_pdev(handle); |
| |
| if (CHECK_HANDLE(handle)) |
| return CS_BAD_HANDLE; |
| s = SOCKET(handle); |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| c = CONFIG(handle); |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| if (c->state & CONFIG_IRQ_REQ) |
| return CS_IN_USE; |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| if (s->irq.AssignedIRQ != 0) { |
| /* If the interrupt is already assigned, it must be the same */ |
| irq = s->irq.AssignedIRQ; |
| } else { |
| int try; |
| u32 mask = s->irq_mask; |
| void *data = NULL; |
| |
| for (try = 0; try < 64; try++) { |
| irq = try % 32; |
| |
| /* marked as available by driver, and not blocked by userspace? */ |
| if (!((mask >> irq) & 1)) |
| continue; |
| |
| /* avoid an IRQ which is already used by a PCMCIA card */ |
| if ((try < 32) && pcmcia_used_irq[irq]) |
| continue; |
| |
| /* register the correct driver, if possible, of check whether |
| * registering a dummy handle works, i.e. if the IRQ isn't |
| * marked as used by the kernel resource management core */ |
| ret = request_irq(irq, |
| (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Handler : test_action, |
| ((req->Attributes & IRQ_TYPE_DYNAMIC_SHARING) || |
| (s->functions > 1) || |
| (irq == s->pci_irq)) ? SA_SHIRQ : 0, |
| p_dev->dev.bus_id, |
| (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Instance : data); |
| if (!ret) { |
| if (!(req->Attributes & IRQ_HANDLE_PRESENT)) |
| free_irq(irq, data); |
| break; |
| } |
| } |
| } |
| #endif |
| if (ret) { |
| if (!s->pci_irq) |
| return ret; |
| irq = s->pci_irq; |
| } |
| |
| if (ret && req->Attributes & IRQ_HANDLE_PRESENT) { |
| if (request_irq(irq, req->Handler, |
| ((req->Attributes & IRQ_TYPE_DYNAMIC_SHARING) || |
| (s->functions > 1) || |
| (irq == s->pci_irq)) ? SA_SHIRQ : 0, |
| p_dev->dev.bus_id, req->Instance)) |
| return CS_IN_USE; |
| } |
| |
| c->irq.Attributes = req->Attributes; |
| s->irq.AssignedIRQ = req->AssignedIRQ = irq; |
| s->irq.Config++; |
| |
| c->state |= CONFIG_IRQ_REQ; |
| handle->state |= CLIENT_IRQ_REQ; |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| pcmcia_used_irq[irq]++; |
| #endif |
| |
| return CS_SUCCESS; |
| } /* pcmcia_request_irq */ |
| |
| /*====================================================================== |
| |
| Request_window() establishes a mapping between card memory space |
| and system memory space. |
| |
| ======================================================================*/ |
| |
| int pcmcia_request_window(client_handle_t *handle, win_req_t *req, window_handle_t *wh) |
| { |
| struct pcmcia_socket *s; |
| window_t *win; |
| u_long align; |
| int w; |
| |
| if (CHECK_HANDLE(*handle)) |
| return CS_BAD_HANDLE; |
| s = (*handle)->Socket; |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| if (req->Attributes & (WIN_PAGED | WIN_SHARED)) |
| return CS_BAD_ATTRIBUTE; |
| |
| /* Window size defaults to smallest available */ |
| if (req->Size == 0) |
| req->Size = s->map_size; |
| align = (((s->features & SS_CAP_MEM_ALIGN) || |
| (req->Attributes & WIN_STRICT_ALIGN)) ? |
| req->Size : s->map_size); |
| if (req->Size & (s->map_size-1)) |
| return CS_BAD_SIZE; |
| if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) || |
| (req->Base & (align-1))) |
| return CS_BAD_BASE; |
| if (req->Base) |
| align = 0; |
| |
| /* Allocate system memory window */ |
| for (w = 0; w < MAX_WIN; w++) |
| if (!(s->state & SOCKET_WIN_REQ(w))) break; |
| if (w == MAX_WIN) |
| return CS_OUT_OF_RESOURCE; |
| |
| win = &s->win[w]; |
| win->magic = WINDOW_MAGIC; |
| win->index = w; |
| win->handle = *handle; |
| win->sock = s; |
| |
| if (!(s->features & SS_CAP_STATIC_MAP)) { |
| win->ctl.res = find_mem_region(req->Base, req->Size, align, |
| (req->Attributes & WIN_MAP_BELOW_1MB), s); |
| if (!win->ctl.res) |
| return CS_IN_USE; |
| } |
| (*handle)->state |= CLIENT_WIN_REQ(w); |
| |
| /* Configure the socket controller */ |
| win->ctl.map = w+1; |
| win->ctl.flags = 0; |
| win->ctl.speed = req->AccessSpeed; |
| if (req->Attributes & WIN_MEMORY_TYPE) |
| win->ctl.flags |= MAP_ATTRIB; |
| if (req->Attributes & WIN_ENABLE) |
| win->ctl.flags |= MAP_ACTIVE; |
| if (req->Attributes & WIN_DATA_WIDTH_16) |
| win->ctl.flags |= MAP_16BIT; |
| if (req->Attributes & WIN_USE_WAIT) |
| win->ctl.flags |= MAP_USE_WAIT; |
| win->ctl.card_start = 0; |
| if (s->ops->set_mem_map(s, &win->ctl) != 0) |
| return CS_BAD_ARGS; |
| s->state |= SOCKET_WIN_REQ(w); |
| |
| /* Return window handle */ |
| if (s->features & SS_CAP_STATIC_MAP) { |
| req->Base = win->ctl.static_start; |
| } else { |
| req->Base = win->ctl.res->start; |
| } |
| *wh = win; |
| |
| return CS_SUCCESS; |
| } /* request_window */ |
| |
| /*====================================================================== |
| |
| I'm not sure which "reset" function this is supposed to use, |
| but for now, it uses the low-level interface's reset, not the |
| CIS register. |
| |
| ======================================================================*/ |
| |
| int pccard_reset_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "resetting socket\n"); |
| |
| down(&skt->skt_sem); |
| do { |
| if (!(skt->state & SOCKET_PRESENT)) { |
| ret = CS_NO_CARD; |
| break; |
| } |
| if (skt->state & SOCKET_SUSPEND) { |
| ret = CS_IN_USE; |
| break; |
| } |
| if (skt->state & SOCKET_CARDBUS) { |
| ret = CS_UNSUPPORTED_FUNCTION; |
| break; |
| } |
| |
| ret = send_event(skt, CS_EVENT_RESET_REQUEST, CS_EVENT_PRI_LOW); |
| if (ret == 0) { |
| send_event(skt, CS_EVENT_RESET_PHYSICAL, CS_EVENT_PRI_LOW); |
| if (socket_reset(skt) == CS_SUCCESS) |
| send_event(skt, CS_EVENT_CARD_RESET, CS_EVENT_PRI_LOW); |
| } |
| |
| ret = CS_SUCCESS; |
| } while (0); |
| up(&skt->skt_sem); |
| |
| return ret; |
| } /* reset_card */ |
| EXPORT_SYMBOL(pccard_reset_card); |
| |
| /*====================================================================== |
| |
| These shut down or wake up a socket. They are sort of user |
| initiated versions of the APM suspend and resume actions. |
| |
| ======================================================================*/ |
| |
| int pcmcia_suspend_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "suspending socket\n"); |
| |
| down(&skt->skt_sem); |
| do { |
| if (!(skt->state & SOCKET_PRESENT)) { |
| ret = CS_NO_CARD; |
| break; |
| } |
| if (skt->state & SOCKET_CARDBUS) { |
| ret = CS_UNSUPPORTED_FUNCTION; |
| break; |
| } |
| ret = socket_suspend(skt); |
| } while (0); |
| up(&skt->skt_sem); |
| |
| return ret; |
| } /* suspend_card */ |
| |
| int pcmcia_resume_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "waking up socket\n"); |
| |
| down(&skt->skt_sem); |
| do { |
| if (!(skt->state & SOCKET_PRESENT)) { |
| ret = CS_NO_CARD; |
| break; |
| } |
| if (skt->state & SOCKET_CARDBUS) { |
| ret = CS_UNSUPPORTED_FUNCTION; |
| break; |
| } |
| ret = socket_resume(skt); |
| } while (0); |
| up(&skt->skt_sem); |
| |
| return ret; |
| } /* resume_card */ |
| |
| /*====================================================================== |
| |
| These handle user requests to eject or insert a card. |
| |
| ======================================================================*/ |
| |
| int pcmcia_eject_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "user eject request\n"); |
| |
| down(&skt->skt_sem); |
| do { |
| if (!(skt->state & SOCKET_PRESENT)) { |
| ret = -ENODEV; |
| break; |
| } |
| |
| ret = send_event(skt, CS_EVENT_EJECTION_REQUEST, CS_EVENT_PRI_LOW); |
| if (ret != 0) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| socket_remove(skt); |
| ret = 0; |
| } while (0); |
| up(&skt->skt_sem); |
| |
| return ret; |
| } /* eject_card */ |
| |
| int pcmcia_insert_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "user insert request\n"); |
| |
| down(&skt->skt_sem); |
| do { |
| if (skt->state & SOCKET_PRESENT) { |
| ret = -EBUSY; |
| break; |
| } |
| if (socket_insert(skt) == CS_NO_CARD) { |
| ret = -ENODEV; |
| break; |
| } |
| ret = 0; |
| } while (0); |
| up(&skt->skt_sem); |
| |
| return ret; |
| } /* insert_card */ |
| |
| /*====================================================================== |
| |
| OS-specific module glue goes here |
| |
| ======================================================================*/ |
| /* in alpha order */ |
| EXPORT_SYMBOL(pcmcia_eject_card); |
| EXPORT_SYMBOL(pcmcia_get_card_services_info); |
| EXPORT_SYMBOL(pcmcia_get_mem_page); |
| EXPORT_SYMBOL(pcmcia_insert_card); |
| EXPORT_SYMBOL(pcmcia_map_mem_page); |
| EXPORT_SYMBOL(pcmcia_modify_configuration); |
| EXPORT_SYMBOL(pcmcia_release_configuration); |
| EXPORT_SYMBOL(pcmcia_release_io); |
| EXPORT_SYMBOL(pcmcia_release_irq); |
| EXPORT_SYMBOL(pcmcia_release_window); |
| EXPORT_SYMBOL(pcmcia_replace_cis); |
| EXPORT_SYMBOL(pcmcia_request_configuration); |
| EXPORT_SYMBOL(pcmcia_request_io); |
| EXPORT_SYMBOL(pcmcia_request_irq); |
| EXPORT_SYMBOL(pcmcia_request_window); |
| EXPORT_SYMBOL(pcmcia_resume_card); |
| EXPORT_SYMBOL(pcmcia_suspend_card); |
| |
| EXPORT_SYMBOL(dead_socket); |
| EXPORT_SYMBOL(pcmcia_parse_events); |
| |
| struct class pcmcia_socket_class = { |
| .name = "pcmcia_socket", |
| .release = pcmcia_release_socket, |
| }; |
| EXPORT_SYMBOL(pcmcia_socket_class); |
| |
| |
| static int __init init_pcmcia_cs(void) |
| { |
| int ret; |
| printk(KERN_INFO "%s\n", release); |
| printk(KERN_INFO " %s\n", options); |
| |
| ret = class_register(&pcmcia_socket_class); |
| if (ret) |
| return (ret); |
| return class_interface_register(&pccard_sysfs_interface); |
| } |
| |
| static void __exit exit_pcmcia_cs(void) |
| { |
| printk(KERN_INFO "unloading Kernel Card Services\n"); |
| class_interface_unregister(&pccard_sysfs_interface); |
| class_unregister(&pcmcia_socket_class); |
| } |
| |
| subsys_initcall(init_pcmcia_cs); |
| module_exit(exit_pcmcia_cs); |
| |
| /*====================================================================*/ |
| |