| /* |
| * Bitbanged MDIO support. |
| * |
| * Author: Scott Wood <scottwood@freescale.com> |
| * Copyright (c) 2007 Freescale Semiconductor |
| * |
| * Based on CPM2 MDIO code which is: |
| * |
| * Copyright (c) 2003 Intracom S.A. |
| * by Pantelis Antoniou <panto@intracom.gr> |
| * |
| * 2005 (c) MontaVista Software, Inc. |
| * Vitaly Bordug <vbordug@ru.mvista.com> |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/mdio-bitbang.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| |
| #define MDIO_READ 1 |
| #define MDIO_WRITE 0 |
| |
| #define MDIO_SETUP_TIME 10 |
| #define MDIO_HOLD_TIME 10 |
| |
| /* Minimum MDC period is 400 ns, plus some margin for error. MDIO_DELAY |
| * is done twice per period. |
| */ |
| #define MDIO_DELAY 250 |
| |
| /* The PHY may take up to 300 ns to produce data, plus some margin |
| * for error. |
| */ |
| #define MDIO_READ_DELAY 350 |
| |
| /* MDIO must already be configured as output. */ |
| static void mdiobb_send_bit(struct mdiobb_ctrl *ctrl, int val) |
| { |
| const struct mdiobb_ops *ops = ctrl->ops; |
| |
| ops->set_mdio_data(ctrl, val); |
| ndelay(MDIO_DELAY); |
| ops->set_mdc(ctrl, 1); |
| ndelay(MDIO_DELAY); |
| ops->set_mdc(ctrl, 0); |
| } |
| |
| /* MDIO must already be configured as input. */ |
| static int mdiobb_get_bit(struct mdiobb_ctrl *ctrl) |
| { |
| const struct mdiobb_ops *ops = ctrl->ops; |
| |
| ndelay(MDIO_DELAY); |
| ops->set_mdc(ctrl, 1); |
| ndelay(MDIO_READ_DELAY); |
| ops->set_mdc(ctrl, 0); |
| |
| return ops->get_mdio_data(ctrl); |
| } |
| |
| /* MDIO must already be configured as output. */ |
| static void mdiobb_send_num(struct mdiobb_ctrl *ctrl, u16 val, int bits) |
| { |
| int i; |
| |
| for (i = bits - 1; i >= 0; i--) |
| mdiobb_send_bit(ctrl, (val >> i) & 1); |
| } |
| |
| /* MDIO must already be configured as input. */ |
| static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits) |
| { |
| int i; |
| u16 ret = 0; |
| |
| for (i = bits - 1; i >= 0; i--) { |
| ret <<= 1; |
| ret |= mdiobb_get_bit(ctrl); |
| } |
| |
| return ret; |
| } |
| |
| /* Utility to send the preamble, address, and |
| * register (common to read and write). |
| */ |
| static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int read, u8 phy, u8 reg) |
| { |
| const struct mdiobb_ops *ops = ctrl->ops; |
| int i; |
| |
| ops->set_mdio_dir(ctrl, 1); |
| |
| /* |
| * Send a 32 bit preamble ('1's) with an extra '1' bit for good |
| * measure. The IEEE spec says this is a PHY optional |
| * requirement. The AMD 79C874 requires one after power up and |
| * one after a MII communications error. This means that we are |
| * doing more preambles than we need, but it is safer and will be |
| * much more robust. |
| */ |
| |
| for (i = 0; i < 32; i++) |
| mdiobb_send_bit(ctrl, 1); |
| |
| /* send the start bit (01) and the read opcode (10) or write (10) */ |
| mdiobb_send_bit(ctrl, 0); |
| mdiobb_send_bit(ctrl, 1); |
| mdiobb_send_bit(ctrl, read); |
| mdiobb_send_bit(ctrl, !read); |
| |
| mdiobb_send_num(ctrl, phy, 5); |
| mdiobb_send_num(ctrl, reg, 5); |
| } |
| |
| |
| static int mdiobb_read(struct mii_bus *bus, int phy, int reg) |
| { |
| struct mdiobb_ctrl *ctrl = bus->priv; |
| int ret, i; |
| |
| mdiobb_cmd(ctrl, MDIO_READ, phy, reg); |
| ctrl->ops->set_mdio_dir(ctrl, 0); |
| |
| /* check the turnaround bit: the PHY should be driving it to zero */ |
| if (mdiobb_get_bit(ctrl) != 0) { |
| /* PHY didn't drive TA low -- flush any bits it |
| * may be trying to send. |
| */ |
| for (i = 0; i < 32; i++) |
| mdiobb_get_bit(ctrl); |
| |
| return 0xffff; |
| } |
| |
| ret = mdiobb_get_num(ctrl, 16); |
| mdiobb_get_bit(ctrl); |
| return ret; |
| } |
| |
| static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val) |
| { |
| struct mdiobb_ctrl *ctrl = bus->priv; |
| |
| mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg); |
| |
| /* send the turnaround (10) */ |
| mdiobb_send_bit(ctrl, 1); |
| mdiobb_send_bit(ctrl, 0); |
| |
| mdiobb_send_num(ctrl, val, 16); |
| |
| ctrl->ops->set_mdio_dir(ctrl, 0); |
| mdiobb_get_bit(ctrl); |
| return 0; |
| } |
| |
| struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl) |
| { |
| struct mii_bus *bus; |
| |
| bus = mdiobus_alloc(); |
| if (!bus) |
| return NULL; |
| |
| __module_get(ctrl->ops->owner); |
| |
| bus->read = mdiobb_read; |
| bus->write = mdiobb_write; |
| bus->priv = ctrl; |
| |
| return bus; |
| } |
| EXPORT_SYMBOL(alloc_mdio_bitbang); |
| |
| void free_mdio_bitbang(struct mii_bus *bus) |
| { |
| struct mdiobb_ctrl *ctrl = bus->priv; |
| |
| module_put(ctrl->ops->owner); |
| mdiobus_free(bus); |
| } |
| EXPORT_SYMBOL(free_mdio_bitbang); |
| |
| MODULE_LICENSE("GPL"); |