| /* |
| * DTS file for SPEAr1310 Evaluation Baord |
| * |
| * Copyright 2012 Viresh Kumar <vireshk@kernel.org> |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /dts-v1/; |
| /include/ "spear1310.dtsi" |
| |
| / { |
| model = "ST SPEAr1310 Evaluation Board"; |
| compatible = "st,spear1310-evb", "st,spear1310"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| memory { |
| reg = <0 0x40000000>; |
| }; |
| |
| ahb { |
| pinmux@e0700000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&state_default>; |
| |
| state_default: pinmux { |
| i2c0 { |
| st,pins = "i2c0_grp"; |
| st,function = "i2c0"; |
| }; |
| i2s0 { |
| st,pins = "i2s0_grp"; |
| st,function = "i2s0"; |
| }; |
| i2s1 { |
| st,pins = "i2s1_grp"; |
| st,function = "i2s1"; |
| }; |
| gpio { |
| st,pins = "arm_gpio_grp"; |
| st,function = "arm_gpio"; |
| }; |
| clcd { |
| st,pins = "clcd_grp" , "clcd_high_res"; |
| st,function = "clcd"; |
| }; |
| eth { |
| st,pins = "gmii_grp"; |
| st,function = "gmii"; |
| }; |
| ssp0 { |
| st,pins = "ssp0_grp"; |
| st,function = "ssp0"; |
| }; |
| kbd { |
| st,pins = "keyboard_6x6_grp"; |
| st,function = "keyboard"; |
| }; |
| sdhci { |
| st,pins = "sdhci_grp"; |
| st,function = "sdhci"; |
| }; |
| smi-pmx { |
| st,pins = "smi_2_chips_grp"; |
| st,function = "smi"; |
| }; |
| uart0 { |
| st,pins = "uart0_grp"; |
| st,function = "uart0"; |
| }; |
| rs485 { |
| st,pins = "rs485_0_1_tdm_0_1_grp"; |
| st,function = "rs485_0_1_tdm_0_1"; |
| }; |
| i2c1_2 { |
| st,pins = "i2c_1_2_grp"; |
| st,function = "i2c_1_2"; |
| }; |
| smii { |
| st,pins = "smii_0_1_2_grp"; |
| st,function = "smii_0_1_2"; |
| }; |
| nand { |
| st,pins = "nand_8bit_grp", |
| "nand_16bit_grp"; |
| st,function = "nand"; |
| }; |
| sata { |
| st,pins = "sata0_grp"; |
| st,function = "sata"; |
| }; |
| pcie { |
| st,pins = "pcie1_grp", "pcie2_grp"; |
| st,function = "pci_express"; |
| }; |
| }; |
| }; |
| |
| ahci@b1000000 { |
| status = "okay"; |
| }; |
| |
| miphy@eb800000 { |
| status = "okay"; |
| }; |
| |
| cf@b2800000 { |
| status = "okay"; |
| }; |
| |
| dma@ea800000 { |
| status = "okay"; |
| }; |
| |
| dma@eb000000 { |
| status = "okay"; |
| }; |
| |
| fsmc: flash@b0000000 { |
| status = "okay"; |
| |
| partition@0 { |
| label = "xloader"; |
| reg = <0x0 0x80000>; |
| }; |
| partition@80000 { |
| label = "u-boot"; |
| reg = <0x80000 0x140000>; |
| }; |
| partition@1C0000 { |
| label = "environment"; |
| reg = <0x1C0000 0x40000>; |
| }; |
| partition@200000 { |
| label = "dtb"; |
| reg = <0x200000 0x40000>; |
| }; |
| partition@240000 { |
| label = "linux"; |
| reg = <0x240000 0xC00000>; |
| }; |
| partition@E40000 { |
| label = "rootfs"; |
| reg = <0xE40000 0x0>; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| button@1 { |
| label = "wakeup"; |
| linux,code = <0x100>; |
| gpios = <&gpio0 7 0x4>; |
| debounce-interval = <20>; |
| gpio-key,wakeup = <1>; |
| }; |
| }; |
| |
| gmac0: eth@e2000000 { |
| phy-mode = "gmii"; |
| status = "okay"; |
| }; |
| |
| sdhci@b3000000 { |
| status = "okay"; |
| }; |
| |
| smi: flash@ea000000 { |
| status = "okay"; |
| clock-rate=<50000000>; |
| |
| flash@e6000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xe6000000 0x800000>; |
| st,smi-fast-mode; |
| |
| partition@0 { |
| label = "xloader"; |
| reg = <0x0 0x10000>; |
| }; |
| partition@10000 { |
| label = "u-boot"; |
| reg = <0x10000 0x50000>; |
| }; |
| partition@60000 { |
| label = "environment"; |
| reg = <0x60000 0x10000>; |
| }; |
| partition@70000 { |
| label = "dtb"; |
| reg = <0x70000 0x10000>; |
| }; |
| partition@80000 { |
| label = "linux"; |
| reg = <0x80000 0x310000>; |
| }; |
| partition@390000 { |
| label = "rootfs"; |
| reg = <0x390000 0x0>; |
| }; |
| }; |
| }; |
| |
| ehci@e4800000 { |
| status = "okay"; |
| }; |
| |
| ehci@e5800000 { |
| status = "okay"; |
| }; |
| |
| ohci@e4000000 { |
| status = "okay"; |
| }; |
| |
| ohci@e5000000 { |
| status = "okay"; |
| }; |
| |
| apb { |
| adc@e0080000 { |
| status = "okay"; |
| }; |
| |
| gpio0: gpio@e0600000 { |
| status = "okay"; |
| }; |
| |
| gpio1: gpio@e0680000 { |
| status = "okay"; |
| }; |
| |
| gpio@d8400000 { |
| status = "okay"; |
| }; |
| |
| i2c0: i2c@e0280000 { |
| status = "okay"; |
| }; |
| |
| kbd@e0300000 { |
| linux,keymap = < 0x00000001 |
| 0x00010002 |
| 0x00020003 |
| 0x00030004 |
| 0x00040005 |
| 0x00050006 |
| 0x00060007 |
| 0x00070008 |
| 0x00080009 |
| 0x0100000a |
| 0x0101000c |
| 0x0102000d |
| 0x0103000e |
| 0x0104000f |
| 0x01050010 |
| 0x01060011 |
| 0x01070012 |
| 0x01080013 |
| 0x02000014 |
| 0x02010015 |
| 0x02020016 |
| 0x02030017 |
| 0x02040018 |
| 0x02050019 |
| 0x0206001a |
| 0x0207001b |
| 0x0208001c |
| 0x0300001d |
| 0x0301001e |
| 0x0302001f |
| 0x03030020 |
| 0x03040021 |
| 0x03050022 |
| 0x03060023 |
| 0x03070024 |
| 0x03080025 |
| 0x04000026 |
| 0x04010027 |
| 0x04020028 |
| 0x04030029 |
| 0x0404002a |
| 0x0405002b |
| 0x0406002c |
| 0x0407002d |
| 0x0408002e |
| 0x0500002f |
| 0x05010030 |
| 0x05020031 |
| 0x05030032 |
| 0x05040033 |
| 0x05050034 |
| 0x05060035 |
| 0x05070036 |
| 0x05080037 |
| 0x06000038 |
| 0x06010039 |
| 0x0602003a |
| 0x0603003b |
| 0x0604003c |
| 0x0605003d |
| 0x0606003e |
| 0x0607003f |
| 0x06080040 |
| 0x07000041 |
| 0x07010042 |
| 0x07020043 |
| 0x07030044 |
| 0x07040045 |
| 0x07050046 |
| 0x07060047 |
| 0x07070048 |
| 0x07080049 |
| 0x0800004a |
| 0x0801004b |
| 0x0802004c |
| 0x0803004d |
| 0x0804004e |
| 0x0805004f |
| 0x08060050 |
| 0x08070051 |
| 0x08080052 >; |
| autorepeat; |
| st,mode = <0>; |
| suspended_rate = <2000000>; |
| status = "okay"; |
| }; |
| |
| rtc@e0580000 { |
| status = "okay"; |
| }; |
| |
| serial@e0000000 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <>; |
| }; |
| |
| spi0: spi@e0100000 { |
| status = "okay"; |
| num-cs = <3>; |
| cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>; |
| |
| stmpe610@0 { |
| compatible = "st,stmpe610"; |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| spi-max-frequency = <1000000>; |
| spi-cpha; |
| pl022,hierarchy = <0>; |
| pl022,interface = <0>; |
| pl022,slave-tx-disable; |
| pl022,com-mode = <0>; |
| pl022,rx-level-trig = <0>; |
| pl022,tx-level-trig = <0>; |
| pl022,ctrl-len = <0x7>; |
| pl022,wait-state = <0>; |
| pl022,duplex = <0>; |
| interrupts = <6 0x4>; |
| interrupt-parent = <&gpio1>; |
| irq-trigger = <0x2>; |
| |
| stmpe_touchscreen { |
| compatible = "st,stmpe-ts"; |
| ts,sample-time = <4>; |
| ts,mod-12b = <1>; |
| ts,ref-sel = <0>; |
| ts,adc-freq = <1>; |
| ts,ave-ctrl = <1>; |
| ts,touch-det-delay = <2>; |
| ts,settling = <2>; |
| ts,fraction-z = <7>; |
| ts,i-drive = <1>; |
| }; |
| }; |
| |
| m25p80@1 { |
| compatible = "st,m25p80"; |
| reg = <1>; |
| spi-max-frequency = <12000000>; |
| spi-cpol; |
| spi-cpha; |
| pl022,hierarchy = <0>; |
| pl022,interface = <0>; |
| pl022,slave-tx-disable; |
| pl022,com-mode = <0x2>; |
| pl022,rx-level-trig = <0>; |
| pl022,tx-level-trig = <0>; |
| pl022,ctrl-len = <0x11>; |
| pl022,wait-state = <0>; |
| pl022,duplex = <0>; |
| }; |
| |
| spidev@2 { |
| compatible = "spidev"; |
| reg = <2>; |
| spi-max-frequency = <25000000>; |
| spi-cpha; |
| pl022,hierarchy = <0>; |
| pl022,interface = <0>; |
| pl022,slave-tx-disable; |
| pl022,com-mode = <0x2>; |
| pl022,rx-level-trig = <0>; |
| pl022,tx-level-trig = <0>; |
| pl022,ctrl-len = <0x11>; |
| pl022,wait-state = <0>; |
| pl022,duplex = <0>; |
| }; |
| }; |
| |
| wdt@ec800620 { |
| status = "okay"; |
| }; |
| }; |
| }; |
| }; |