| /* |
| * BSD LICENSE |
| * |
| * Copyright(c) 2014 Broadcom Corporation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Broadcom Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/clock/bcm-cygnus.h> |
| |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "brcm,cygnus"; |
| model = "Broadcom Cygnus SoC"; |
| interrupt-parent = <&gic>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| next-level-cache = <&L2>; |
| reg = <0x0>; |
| }; |
| }; |
| |
| /include/ "bcm-cygnus-clock.dtsi" |
| |
| core { |
| compatible = "simple-bus"; |
| ranges = <0x00000000 0x19000000 0x1000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| timer@20200 { |
| compatible = "arm,cortex-a9-global-timer"; |
| reg = <0x20200 0x100>; |
| interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&periph_clk>; |
| }; |
| |
| gic: interrupt-controller@21000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x21000 0x1000>, |
| <0x20100 0x100>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "arm,pl310-cache"; |
| reg = <0x22000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| }; |
| |
| axi { |
| compatible = "simple-bus"; |
| ranges; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pinctrl: pinctrl@0x0301d0c8 { |
| compatible = "brcm,cygnus-pinmux"; |
| reg = <0x0301d0c8 0x30>, |
| <0x0301d24c 0x2c>; |
| }; |
| |
| gpio_crmu: gpio@03024800 { |
| compatible = "brcm,cygnus-crmu-gpio"; |
| reg = <0x03024800 0x50>, |
| <0x03024008 0x18>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| |
| i2c0: i2c@18008000 { |
| compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; |
| reg = <0x18008000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| wdt0: wdt@18009000 { |
| compatible = "arm,sp805" , "arm,primecell"; |
| reg = <0x18009000 0x1000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio_ccm: gpio@1800a000 { |
| compatible = "brcm,cygnus-ccm-gpio"; |
| reg = <0x1800a000 0x50>, |
| <0x0301d164 0x20>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| }; |
| |
| i2c1: i2c@1800b000 { |
| compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; |
| reg = <0x1800b000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| pcie0: pcie@18012000 { |
| compatible = "brcm,iproc-pcie"; |
| reg = <0x18012000 0x1000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; |
| |
| linux,pci-domain = <0>; |
| |
| bus-range = <0x00 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x81000000 0 0 0x28000000 0 0x00010000 |
| 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie1: pcie@18013000 { |
| compatible = "brcm,iproc-pcie"; |
| reg = <0x18013000 0x1000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; |
| |
| linux,pci-domain = <1>; |
| |
| bus-range = <0x00 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x81000000 0 0 0x48000000 0 0x00010000 |
| 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; |
| |
| status = "disabled"; |
| }; |
| |
| uart0: serial@18020000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x18020000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-frequency = <100000000>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@18021000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x18021000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-frequency = <100000000>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@18022000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x18020000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-frequency = <100000000>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@18023000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x18023000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-frequency = <100000000>; |
| status = "disabled"; |
| }; |
| |
| nand: nand@18046000 { |
| compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; |
| reg = <0x18046000 0x600>, <0xf8105408 0x600>, |
| <0x18046f00 0x20>; |
| reg-names = "nand", "iproc-idm", "iproc-ext"; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| brcm,nand-has-wp; |
| }; |
| |
| gpio_asiu: gpio@180a5000 { |
| compatible = "brcm,cygnus-asiu-gpio"; |
| reg = <0x180a5000 0x668>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| |
| pinmux = <&pinctrl>; |
| |
| interrupt-controller; |
| interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| touchscreen: tsc@180a6000 { |
| compatible = "brcm,iproc-touchscreen"; |
| reg = <0x180a6000 0x40>; |
| clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; |
| clock-names = "tsc_clk"; |
| interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| }; |