| /* |
| * s2mu005_fuelgauge.c - S2MU005 Fuel Gauge Driver |
| * |
| * Copyright (C) 2017 Samsung Electronics, Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| */ |
| |
| #define DEBUG |
| |
| #define SINGLE_BYTE 1 |
| #define TABLE_SIZE 22 |
| |
| #include "include/fuelgauge/s2mu005_fuelgauge.h" |
| #include <linux/of_gpio.h> |
| #include <linux/sec_batt.h> |
| |
| static enum power_supply_property s2mu005_fuelgauge_props[] = { |
| }; |
| |
| static int s2mu005_get_vbat(struct s2mu005_fuelgauge_data *fuelgauge); |
| static int s2mu005_get_ocv(struct s2mu005_fuelgauge_data *fuelgauge); |
| static int s2mu005_get_current(struct s2mu005_fuelgauge_data *fuelgauge); |
| static int s2mu005_get_avgcurrent(struct s2mu005_fuelgauge_data *fuelgauge); |
| static int s2mu005_get_avgvbat(struct s2mu005_fuelgauge_data *fuelgauge); |
| static int s2mu005_get_monout_avgvbat(struct s2mu005_fuelgauge_data *fuelgauge); |
| |
| static int s2mu005_read_reg_byte(struct i2c_client *client, int reg, void *data) |
| { |
| int ret = 0; |
| int cnt = 0; |
| |
| ret = i2c_smbus_read_byte_data(client, reg); |
| if (ret < 0) { |
| while (ret < 0 && cnt < 5) { |
| ret = i2c_smbus_read_byte_data(client, reg); |
| cnt++; |
| dev_err(&client->dev, |
| "%s: I2C read Incorrect! reg:0x%x, data:0x%x, cnt:%d\n", |
| __func__, reg, *(u8 *)data, cnt); |
| } |
| if (cnt == 5) |
| dev_err(&client->dev, |
| "%s: I2C read Failed reg:0x%x, data:0x%x\n", |
| __func__, reg, *(u8 *)data); |
| } |
| *(u8 *)data = (u8)ret; |
| |
| return ret; |
| } |
| |
| /* |
| static int s2mu005_write_reg_byte(struct i2c_client *client, int reg, u8 data) |
| { |
| int ret, i = 0; |
| |
| ret = i2c_smbus_write_byte_data(client, reg, data); |
| if (ret < 0) { |
| for (i = 0; i < 3; i++) { |
| ret = i2c_smbus_write_byte_data(client, reg, data); |
| if (ret >= 0) |
| break; |
| } |
| |
| if (i >= 3) |
| dev_err(&client->dev, "%s: Error(%d)\n", __func__, ret); |
| } |
| |
| return ret; |
| } |
| */ |
| |
| static int s2mu005_write_and_verify_reg_byte(struct i2c_client *client, int reg, u8 data) |
| { |
| int ret, i = 0; |
| int i2c_corrupted_cnt = 0; |
| u8 temp = 0; |
| |
| /* pr_info("[SKB]%s: write addr:0x%x, data:0x%x\n", __func__, reg, data); */ |
| ret = i2c_smbus_write_byte_data(client, reg, data); |
| if (ret < 0) { |
| for (i = 0; i < 3; i++) { |
| ret = i2c_smbus_write_byte_data(client, reg, data); |
| if (ret >= 0) |
| break; |
| } |
| |
| if (i >= 3) |
| dev_err(&client->dev, "%s: Error(%d)\n", __func__, ret); |
| } |
| |
| /* Skip non-writable registers */ |
| if ((reg == 0xee) || (reg == 0xef) || (reg == 0xf2) || (reg == 0xf3) || |
| (reg == 0x1e) || (reg == 0x1f) || (reg == 0x44) || (reg == 0x45) || |
| (reg == 0x54) || (reg == 0x55) || (reg == 0x56) || (reg == 0x57)) { |
| return ret; |
| } |
| |
| s2mu005_read_reg_byte(client, reg, &temp); |
| while ((temp != data) && (i2c_corrupted_cnt < 5)) { |
| dev_err(&client->dev, |
| "%s: I2C write Incorrect! REG: 0x%x Expected: 0x%x Real-Value: 0x%x\n", |
| __func__, reg, data, temp); |
| ret = i2c_smbus_write_byte_data(client, reg, data); |
| s2mu005_read_reg_byte(client, reg, &temp); |
| i2c_corrupted_cnt++; |
| } |
| |
| if (i2c_corrupted_cnt == 5) |
| dev_err(&client->dev, |
| "%s: I2C write failed REG: 0x%x Expected: 0x%x\n", |
| __func__, reg, data); |
| |
| return ret; |
| } |
| |
| static int s2mu005_write_reg(struct i2c_client *client, int reg, u8 *buf) |
| { |
| #if SINGLE_BYTE |
| int ret = 0; |
| s2mu005_write_and_verify_reg_byte(client, reg, buf[0]); |
| s2mu005_write_and_verify_reg_byte(client, reg+1, buf[1]); |
| #else |
| int ret, i = 0; |
| |
| ret = i2c_smbus_write_i2c_block_data(client, reg, 2, buf); |
| if (ret < 0) { |
| for (i = 0; i < 3; i++) { |
| ret = i2c_smbus_write_i2c_block_data(client, reg, 2, buf); |
| if (ret >= 0) |
| break; |
| } |
| |
| if (i >= 3) |
| dev_err(&client->dev, "%s: Error(%d)\n", __func__, ret); |
| } |
| #endif |
| return ret; |
| } |
| |
| static int s2mu005_read_reg(struct i2c_client *client, int reg, u8 *buf) |
| { |
| |
| #if SINGLE_BYTE |
| int ret =0; |
| u8 data1 = 0, data2 = 0; |
| s2mu005_read_reg_byte(client, reg, &data1); |
| s2mu005_read_reg_byte(client, reg+1, &data2); |
| buf[0] = data1; |
| buf[1] = data2; |
| #else |
| int ret = 0, i = 0; |
| |
| ret = i2c_smbus_read_i2c_block_data(client, reg, 2, buf); |
| if (ret < 0) { |
| for (i = 0; i < 3; i++) { |
| ret = i2c_smbus_read_i2c_block_data(client, reg, 2, buf); |
| if (ret >= 0) |
| break; |
| } |
| |
| if (i >= 3) |
| dev_err(&client->dev, "%s: Error(%d)\n", __func__, ret); |
| } |
| #endif |
| return ret; |
| } |
| |
| static void s2mu005_fg_test_read(struct i2c_client *client) |
| { |
| static int reg_list[] = { |
| 0x03, 0x0E, 0x0F, 0x10, 0x11, 0x1E, 0x1F, 0x21, 0x24, 0x25, |
| 0x26, 0x27, 0x44, 0x45, 0x48, 0x4A, 0x4B, 0x50, 0x51, 0x52, |
| 0x53, 0x58, 0x59, 0x5A, 0x5B |
| }; |
| u8 data = 0; |
| char str[1016] = {0,}; |
| int i = 0, reg_list_size = 0; |
| |
| reg_list_size = ARRAY_SIZE(reg_list); |
| for (i = 0; i < reg_list_size; i++) { |
| s2mu005_read_reg_byte(client, reg_list[i], &data); |
| sprintf(str+strlen(str), "0x%02x:0x%02x, ", reg_list[i], data); |
| } |
| |
| /* print buffer */ |
| pr_info("[FG]%s: %s\n", __func__, str); |
| } |
| |
| #if defined(CONFIG_S2MU005_VOLT_MODE_TUNING) |
| int check_current_level(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| int ret_val = 500; |
| int temp = 0; |
| |
| if (fuelgauge->cable_type == SEC_BATTERY_CABLE_USB) { |
| return ret_val; |
| } |
| |
| /* topoff current * 1.6 except USB */ |
| temp = fuelgauge->topoff_current * 16; |
| ret_val = temp / 10; |
| |
| return ret_val; |
| } |
| #endif |
| |
| static void WA_0_issue_at_init(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| int a = 0; |
| u8 v_52 = 0, v_53 =0, temp1, temp2; |
| int FG_volt, UI_volt, offset; |
| u8 v_40 = 0; |
| u8 temp_REG26 = 0, temp_REG27 = 0, temp = 0; |
| |
| /* Step 1: [Surge test] get UI voltage (0.1mV)*/ |
| UI_volt = s2mu005_get_ocv(fuelgauge); |
| |
| /* current fix for soc */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, &temp_REG27); |
| temp = temp_REG27; |
| temp |= 0x0F; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp_REG26); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, 0xF7); |
| |
| /* avgvbat factor value set to 0xFF */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x40, &v_40); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, 0xFF); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1E, 0x0F); |
| msleep(50); |
| |
| /* Step 2: [Surge test] get FG voltage (0.1mV) */ |
| FG_volt = s2mu005_get_vbat(fuelgauge) * 10; |
| |
| /* Step 3: [Surge test] get offset */ |
| offset = UI_volt - FG_volt; |
| pr_info("%s: UI_volt(%d), FG_volt(%d), offset(%d)\n", |
| __func__, UI_volt, FG_volt, offset); |
| |
| /* Step 4: [Surge test] */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x53, &v_53); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x52, &v_52); |
| pr_info("%s: v_53(0x%x), v_52(0x%x)\n", __func__, v_53, v_52); |
| |
| a = (v_53 & 0x0F) << 8; |
| a += v_52; |
| pr_info("%s: a before add offset (0x%x)\n", __func__, a); |
| |
| /* 2`s complement */ |
| if (a & (0x01 << 11)) |
| a = (-10000 * ((a^0xFFF) + 1)) >> 13; |
| else |
| a = (10000 * a) >> 13; |
| |
| a = a + offset; |
| pr_err("%s: a after add offset (0x%x)\n", __func__, a); |
| |
| /* limit upper/lower offset */ |
| if (a > 2490) |
| a = 2490; |
| |
| if (a < (-2490)) |
| a = -2490; |
| |
| a = (a << 13) / 10000; |
| if (a < 0) |
| a = -1*((a^0xFFF)+1); |
| |
| pr_info("%s: a after add offset (0x%x)\n", __func__, a); |
| |
| a &= 0xfff; |
| pr_info("%s: (a)&0xFFF (0x%x)\n", __func__, a); |
| |
| /* modify 0x53[3:0] */ |
| temp1 = v_53 & 0xF0; |
| temp2 = (u8)((a&0xF00) >> 8); |
| temp1 |= temp2; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x53, temp1); |
| |
| /* modify 0x52[7:0] */ |
| temp2 = (u8)(a & 0xFF); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x52, temp2); |
| |
| /* restart and dumpdone */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1E, 0x0F); |
| msleep(300); |
| |
| /* restore current register */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp_REG27); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, 0xF6); |
| |
| /* recovery 0x52 and 0x53 */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x53, &temp1); |
| temp1 &= 0xF0; |
| temp1 |= (v_53 & 0x0F); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x53, temp1); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x52, v_52); |
| |
| /* restore monout avgvbat factor value */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, v_40); |
| } |
| |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| static void WA_force_rawsoc_100(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 temp1 = 0, v_40 = 0; |
| |
| /* Set discharging current*/ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, 0xF6); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, &temp1); |
| temp1 |= 0x0F; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp1); |
| |
| /* Set average voltage coefficient (addr 0x40 = 0xFF) */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x40, &v_40); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, 0xFF); |
| |
| /* Fix discharging current (addr 0x26[0] = 0x1) */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp1); |
| temp1 |= 0x01; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, temp1); |
| |
| /* Set voltage fix for 100% rawsoc & enable */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x25, &temp1); |
| temp1 &= 0xF0; |
| temp1 |= 0x05; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x25, temp1); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x24, 0xB7); |
| |
| /* restart and dumpdone */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1E, 0x0F); |
| msleep(300); |
| |
| /* Disable voltage fix */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x24, &temp1); |
| temp1 &= 0xFE; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x24, temp1); |
| |
| /* Disable discharging current fix */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp1); |
| temp1 &= 0xFE; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, temp1); |
| |
| /* Recover Reg 0x40 */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, v_40); |
| } |
| #endif |
| |
| static int s2mu005_get_soc_from_ocv(struct s2mu005_fuelgauge_data *fuelgauge, int target_ocv) |
| { |
| /* 22 values of mapping table for EVT1*/ |
| |
| int *soc_arr; |
| int *ocv_arr; |
| int soc = 0; |
| int ocv = target_ocv * 10; |
| |
| int high_index = TABLE_SIZE - 1; |
| int low_index = 0; |
| int mid_index = 0; |
| |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| soc_arr = fuelgauge->age_data_info[fuelgauge->fg_age_step].soc_arr_val; |
| ocv_arr = fuelgauge->age_data_info[fuelgauge->fg_age_step].ocv_arr_val; |
| #else |
| if (fuelgauge->revision >= 2) { |
| soc_arr = fuelgauge->info.soc_arr_evt2; |
| ocv_arr = fuelgauge->info.ocv_arr_evt2; |
| } else { |
| soc_arr = fuelgauge->info.soc_arr_evt1; |
| ocv_arr = fuelgauge->info.ocv_arr_evt1; |
| } |
| #endif |
| |
| pr_err("%s: soc_arr(%d) ocv_arr(%d)\n", __func__,*soc_arr, *ocv_arr); |
| |
| if (ocv <= ocv_arr[TABLE_SIZE - 1]) { |
| soc = soc_arr[TABLE_SIZE - 1]; |
| goto soc_ocv_mapping; |
| } else if (ocv >= ocv_arr[0]) { |
| soc = soc_arr[0]; |
| goto soc_ocv_mapping; |
| } |
| while (low_index <= high_index) { |
| mid_index = (low_index + high_index) >> 1; |
| if (ocv_arr[mid_index] > ocv) |
| low_index = mid_index + 1; |
| else if (ocv_arr[mid_index] < ocv) |
| high_index = mid_index - 1; |
| else { |
| soc = soc_arr[mid_index]; |
| goto soc_ocv_mapping; |
| } |
| } |
| soc = soc_arr[high_index]; |
| soc += ((soc_arr[low_index] - soc_arr[high_index]) * |
| (ocv - ocv_arr[high_index])) / |
| (ocv_arr[low_index] - ocv_arr[high_index]); |
| |
| soc_ocv_mapping: |
| dev_info(&fuelgauge->i2c->dev, "%s: ocv (%d), soc (%d)\n", __func__, ocv, soc); |
| return soc; |
| } |
| |
| static void WA_0_issue_at_init1(struct s2mu005_fuelgauge_data *fuelgauge, int target_ocv) |
| { |
| int a = 0; |
| u8 v_52 = 0, v_53 =0, temp1, temp2; |
| int FG_volt, UI_volt, offset; |
| u8 v_40 = 0; |
| u8 temp_REG26 = 0, temp_REG27 = 0, temp = 0; |
| |
| if ((fuelgauge->temperature <= (int)fuelgauge->low_temp_limit) && (!(fuelgauge->info.soc <= 500))) { |
| union power_supply_propval value = {0, }; |
| pr_info("%s : Skip F/G reset in low temperatures\n", __func__); |
| |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, value); |
| pr_info("%s: swelling_mode = %d\n", __func__, value.intval); |
| if (value.intval == 0) |
| fuelgauge->vbatl_mode = VBATL_MODE_SW_VALERT; |
| return; |
| } |
| |
| mutex_lock(&fuelgauge->fg_lock); |
| |
| /* Step 1: [Surge test] get UI voltage (0.1mV)*/ |
| UI_volt = target_ocv * 10; |
| |
| /* avgvbat factor value set to 0xFF */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x40, &v_40); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, 0xFF); |
| |
| /* current fix for soc */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, &temp_REG27); |
| temp = temp_REG27; |
| temp |= 0x0F; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp_REG26); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, 0xF7); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1E, 0x0F); |
| msleep(50); |
| |
| /* Step 2: [Surge test] get FG voltage (0.1mV) */ |
| FG_volt = s2mu005_get_vbat(fuelgauge) * 10; |
| |
| /* Step 3: [Surge test] get offset */ |
| offset = UI_volt - FG_volt; |
| pr_info("%s: UI_volt(%d), FG_volt(%d), offset(%d)\n", |
| __func__, UI_volt, FG_volt, offset); |
| |
| /* Step 4: [Surge test] */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x53, &v_53); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x52, &v_52); |
| pr_info("%s: Read v_53(0x%x), v_52(0x%x)\n", __func__, v_53, v_52); |
| |
| a = (v_53 & 0x0F) << 8; |
| a += v_52; |
| pr_info("%s: a before add offset (0x%x)\n", __func__, a); |
| |
| /* 2`s complement */ |
| if (a & (0x01 << 11)) |
| a = (-10000 * ((a^0xFFF) +1)) >> 13; |
| else |
| a = (10000 * a) >> 13; |
| |
| a = a + offset; |
| pr_err("%s: a after add offset (0x%x)\n", __func__, a); |
| |
| /* limit upper/lower offset */ |
| if (a > 2490) |
| a = 2490; |
| |
| if (a < (-2490)) |
| a = -2490; |
| |
| a = (a << 13) / 10000; |
| if (a < 0) |
| a = -1*((a^0xFFF)+1); |
| |
| pr_info("%s: a after add offset (0x%x)\n", __func__, a); |
| |
| a &= 0xfff; |
| pr_info("%s: (a)&0xFFF (0x%x)\n", __func__, a); |
| |
| /* modify 0x53[3:0] */ |
| temp1 = v_53 & 0xF0; |
| temp2 = (u8)((a&0xF00) >> 8); |
| temp1 |= temp2; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x53, temp1); |
| |
| /* modify 0x52[7:0] */ |
| temp2 = (u8)(a & 0xFF); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x52, temp2); |
| |
| /* restart and dumpdone */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1E, 0x0F); |
| msleep(300); |
| |
| /* restore current register */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp_REG27); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, 0xF6); |
| |
| pr_info("%s: S2MU005 VBAT : %d\n", __func__, s2mu005_get_vbat(fuelgauge) * 10); |
| |
| /* recovery 0x52 and 0x53 */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x53, &temp1); |
| temp1 &= 0xF0; |
| temp1 |= (v_53 & 0x0F); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x53, temp1); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x52, v_52); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x53, &v_53); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x52, &v_52); |
| pr_info("%s: Restored v_53(0x%x), v_52(0x%x)\n", __func__, v_53, v_52); |
| |
| /* restore monout avgvbat factor value */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, v_40); |
| s2mu005_fg_test_read(fuelgauge->i2c); |
| |
| mutex_unlock(&fuelgauge->fg_lock); |
| } |
| |
| static void s2mu005_reset_fg(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| int i; |
| u8 temp = 0; |
| |
| mutex_lock(&fuelgauge->fg_lock); |
| |
| /* step 0: [Surge test] initialize register of FG */ |
| |
| /* Reset IC */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, 0x40); |
| msleep(50); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, 0x01); |
| msleep(50); |
| |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x0F, fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[0]); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x0E, fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[1]); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x11, fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[2]); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x10, fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[3]); |
| #if defined(CONFIG_S2MU005_VOLT_MODE_TUNING) |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x13, fuelgauge->age_data_info[fuelgauge->fg_age_step].volt_mode_tunning); |
| #endif |
| #else |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x0F, fuelgauge->info.batcap[0]); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x0E, fuelgauge->info.batcap[1]); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x11, fuelgauge->info.batcap[2]); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x10, fuelgauge->info.batcap[3]); |
| #endif |
| /* After battery capacity update, set BATCAP_OCV_EN(0x0C[6]=1) */ |
| if (fuelgauge->revision >= 0x0A) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x0C, &temp); |
| temp |= 0x40; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x0C, temp); |
| } |
| |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| for (i = 0x92; i <= 0xe9; i++) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, i, fuelgauge->age_data_info[fuelgauge->fg_age_step].battery_table3[i - 0x92]); |
| } |
| for (i = 0xea; i <= 0xff; i++) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, i, fuelgauge->age_data_info[fuelgauge->fg_age_step].battery_table4[i - 0xea]); |
| } |
| #else |
| if (fuelgauge->revision >= 2) { |
| for (i = 0x92; i <= 0xe9; i++) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, i, fuelgauge->info.battery_table3[i - 0x92]); |
| } |
| for (i = 0xea; i <= 0xff; i++) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, i, fuelgauge->info.battery_table4[i - 0xea]); |
| } |
| } else { |
| for (i = 0x92; i <= 0xe9; i++) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, i, fuelgauge->info.battery_table1[i - 0x92]); |
| } |
| for (i = 0xea; i <= 0xff; i++) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, i, fuelgauge->info.battery_table2[i - 0xea]); |
| } |
| } |
| #endif |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x21, 0x13); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x14, 0x40); |
| |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| temp |= fuelgauge->age_data_info[fuelgauge->fg_age_step].accum[1]; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, fuelgauge->age_data_info[fuelgauge->fg_age_step].accum[0]); |
| #else |
| if (fuelgauge->revision >= 2) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| temp |= fuelgauge->info.fg_accumulative_rate_evt2[1]; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, |
| fuelgauge->info.fg_accumulative_rate_evt2[0]); |
| } else { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| temp |= 0x07; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0xCC); |
| } |
| #endif |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, &temp); |
| temp |= 0x10; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp); |
| |
| if (fuelgauge->revision >= 2) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4B, 0x0B); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4A, 0x10); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x03, &temp); |
| temp |= 0x40; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x03, temp); |
| } |
| else { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4B, 0x09); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, &temp); |
| temp |= 0x0F; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp); |
| temp |= 0xFE; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4A, 0xFF); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp); |
| temp &= 0xFE; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, temp); |
| } |
| |
| /* Set average voltage coefficient ( addr 0x40 = 0x08 ) */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, 0x08); |
| /* Set average current coefficient ( addr 0x41 = 0x04 ) */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x41, 0x04); |
| |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| if (fuelgauge->age_reset_status == 1) |
| WA_force_rawsoc_100(fuelgauge); |
| else |
| WA_0_issue_at_init(fuelgauge); |
| #else |
| WA_0_issue_at_init(fuelgauge); |
| #endif |
| |
| /* If it was voltage mode, recover it */ |
| if ((fuelgauge->revision >= 2) && |
| ((fuelgauge->mode == HIGH_SOC_VOLTAGE_MODE) || |
| (fuelgauge->mode == LOW_SOC_VOLTAGE_MODE))) |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4A, 0xFF); |
| |
| /* |
| * After FG reset current battery data version gets reset to default value 1. |
| * This is causing mismatch in bootloader and kernel FG data version. |
| * The code below restores the FG data version in 0x48 register to its initalized value. |
| */ |
| pr_info("%s: FG data version %02x\n", __func__, fuelgauge->info.data_ver); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x48, &temp); |
| temp &= 0xF1; |
| temp |= (fuelgauge->info.data_ver << 1); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x48, temp); |
| |
| mutex_unlock(&fuelgauge->fg_lock); |
| |
| pr_info("%s: Reset FG completed\n", __func__); |
| } |
| |
| static void s2mu005_restart_gauging(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 temp = 0, temp_REG26 = 0, temp_REG27 = 0; |
| u8 v_40 = 0; |
| pr_info("%s: Re-calculate SOC and voltage\n", __func__); |
| |
| mutex_lock(&fuelgauge->fg_lock); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, &temp_REG27); |
| temp=temp_REG27; |
| temp |= 0x0F; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp_REG26); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, 0xF7); |
| |
| /* avgvbat factor value set to 0xFF */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x40, &v_40); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, 0xFF); |
| |
| //s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1f, 0x01); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x21, 0x13); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1E, 0x0F); |
| |
| msleep(300); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp_REG27); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, 0xF6); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, &temp); |
| pr_info("%s: 0x27 : %02x\n", __func__,temp); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp); |
| pr_info("%s: 0x26 : %02x\n", __func__,temp); |
| |
| /* restore monout avgvbat factor value */ |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, v_40); |
| |
| mutex_unlock(&fuelgauge->fg_lock); |
| } |
| |
| static void s2mu005_init_regs(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 temp = 0; |
| pr_info("%s: s2mu005 fuelgauge initialize\n", __func__); |
| |
| /* From A01 IFPMIC revision 0x27[3:0] only is writable |
| * so 0x27[6:4] cannot be written and it will return I2C verification fail issue */ |
| if (fuelgauge->revision < 0x0A) { |
| /* Reduce top-off current difference between |
| * Power on charging and Power off charging |
| */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, &temp); |
| temp |= 0x10; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp); |
| } |
| |
| if (fuelgauge->revision < 2) { |
| /* Sampling time set 500ms */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0x3F; |
| temp |= 0x0; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| } |
| |
| if (fuelgauge->revision >= 3) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp); |
| temp &= 0xFE; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, temp); |
| } |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x53, &temp); |
| fuelgauge->reg_OTP_53 = temp; |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x52, &temp); |
| fuelgauge->reg_OTP_52 = temp; |
| } |
| |
| static void s2mu005_alert_init(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| |
| /* VBAT Threshold setting: 3.55V */ |
| data[0] = 0x00 & 0x0f; |
| |
| /* SOC Threshold setting */ |
| data[0] = data[0] | (fuelgauge->pdata->fuel_alert_soc << 4); |
| |
| data[1] = 0x00; |
| s2mu005_write_reg(fuelgauge->i2c, S2MU005_REG_IRQ_LVL, data); |
| } |
| |
| static bool s2mu005_check_status(struct i2c_client *client) |
| { |
| u8 data[2]; |
| bool ret = false; |
| |
| /* check if Smn was generated */ |
| if (s2mu005_read_reg(client, S2MU005_REG_STATUS, data) < 0) |
| return ret; |
| |
| dev_dbg(&client->dev, "%s: status to (%02x%02x)\n", |
| __func__, data[1], data[0]); |
| |
| if (data[1] & (0x1 << 1)) |
| return true; |
| else |
| return false; |
| } |
| |
| static int s2mu005_set_temperature(struct s2mu005_fuelgauge_data *fuelgauge, |
| int temperature) |
| { |
| /* |
| * s5mu005 include temperature sensor so, |
| * do not need to set temperature value. |
| */ |
| return temperature; |
| } |
| |
| static int s2mu005_get_temperature(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u16 compliment; |
| int temperature = 0; |
| |
| /* |
| * use monitor regiser. |
| * monitor register default setting is temperature |
| */ |
| mutex_lock(&fuelgauge->fg_lock); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, S2MU005_REG_MONOUT_SEL, 0x10); |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_MONOUT, data) < 0) |
| goto err; |
| pr_info("%s temp data = 0x%x 0x%x\n", __func__, data[0], data[1]); |
| |
| mutex_unlock(&fuelgauge->fg_lock); |
| compliment = (data[1] << 8) | (data[0]); |
| |
| /* data[] store 2's compliment format number */ |
| if (compliment & (0x1 << 15)) { |
| /* Negative */ |
| temperature = -1 * ((~compliment & 0xFFFF) + 1); |
| } else { |
| temperature = compliment & 0x7FFF; |
| } |
| temperature = ((temperature * 100) >> 8)/10; |
| |
| dev_dbg(&fuelgauge->i2c->dev, "%s: temperature (%d)\n", |
| __func__, temperature); |
| |
| return temperature; |
| |
| err: |
| mutex_unlock(&fuelgauge->fg_lock); |
| return -ERANGE; |
| } |
| |
| static int s2mu005_get_rawsoc(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2], check_data[2]; |
| u16 compliment; |
| int rsoc, i; |
| u8 por_state = 0; |
| u8 temp = 0; |
| u8 reg = S2MU005_REG_RSOC; |
| u8 reg_OTP_52 = 0, reg_OTP_53 = 0; |
| int fg_reset = 0; |
| bool charging_enabled = false; |
| union power_supply_propval value; |
| int force_power_off_voltage = 0; |
| int rbat = 0; |
| int float_voltage = 0; |
| |
| int avg_current = 0, avg_vbat = 0, vbat = 0, curr = 0, avg_monout_vbat = 0; |
| int ocv_pwroff = 0, ocv_100 = 0, ocv_pwr_voltagemode = 0; |
| int target_soc = 0, soc_100 = 0; |
| //bkj - rempcap logging |
| int rsoc1; |
| u8 fg_mode_reg = 0; |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x1F, &por_state); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x53, ®_OTP_53); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x52, ®_OTP_52); |
| dev_err(&fuelgauge->i2c->dev, "%s: OTP 52(%02x) 53(%02x), current 52(%02x) 53(%02x), 0x1F(%02x)\n", |
| __func__, fuelgauge->reg_OTP_52, fuelgauge->reg_OTP_53, reg_OTP_52, reg_OTP_53, por_state); |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| if (((por_state != 0x00) && (fuelgauge->age_reset_status == 0)) || |
| (fuelgauge->probe_done == true && |
| (fuelgauge->reg_OTP_52 != reg_OTP_52 || fuelgauge->reg_OTP_53 != reg_OTP_53))) |
| #else |
| if ((por_state != 0x00) || |
| (fuelgauge->probe_done == true && |
| (fuelgauge->reg_OTP_52 != reg_OTP_52 || fuelgauge->reg_OTP_53 != reg_OTP_53))) |
| #endif |
| { |
| psy_do_property("s2mu005-charger", get, POWER_SUPPLY_PROP_CHARGING_ENABLED, value); |
| charging_enabled = value.intval; |
| value.intval = SEC_BAT_CHG_MODE_CHARGING_OFF; |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_PROP_CHARGING_ENABLED, value); |
| |
| if (fuelgauge->reg_OTP_52 != reg_OTP_52 || fuelgauge->reg_OTP_53 != reg_OTP_53) { |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_EXT_PROP_FUELGAUGE_RESET, value); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, 0x40); |
| msleep(50); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, 0x01); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x53, ®_OTP_53); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x52, ®_OTP_52); |
| |
| dev_err(&fuelgauge->i2c->dev, "1st reset after %s: OTP 52(%02x) 53(%02x) current 52(%02x) 53(%02x)\n", |
| __func__, fuelgauge->reg_OTP_52, fuelgauge->reg_OTP_53, reg_OTP_52, reg_OTP_53); |
| |
| if (fuelgauge->reg_OTP_52 != reg_OTP_52 || fuelgauge->reg_OTP_53 != reg_OTP_53) { |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_EXT_PROP_FUELGAUGE_RESET, value); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, 0x40); |
| msleep(50); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, 0x01); |
| dev_err(&fuelgauge->i2c->dev, "%s : 2nd reset\n", __func__); |
| } |
| } |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: FG reset\n", __func__); |
| s2mu005_reset_fg(fuelgauge); |
| por_state = 0x00; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, por_state); |
| |
| fg_reset = 1; |
| } |
| |
| mutex_lock(&fuelgauge->fg_lock); |
| |
| |
| if (fuelgauge->revision >= 3) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp); |
| if ((temp & 0x01) == 0x01) { |
| temp &= 0xFE; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, temp); |
| } |
| } |
| |
| |
| if (fuelgauge->revision >= 2) |
| reg = S2MU005_REG_RSOC; |
| else { |
| if (fuelgauge->mode == CURRENT_MODE) |
| reg = S2MU005_REG_RSOC; |
| else { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x0C, 0x03); |
| reg = S2MU005_REG_MONOUT; |
| } |
| } |
| |
| for (i = 0; i < 50; i++) { |
| if (s2mu005_read_reg(fuelgauge->i2c, reg, data) < 0) |
| goto err; |
| if (s2mu005_read_reg(fuelgauge->i2c, reg, check_data) < 0) |
| goto err; |
| |
| dev_dbg(&fuelgauge->i2c->dev, "[DEBUG]%s: data0 (%d) data1 (%d)\n", __func__, data[0], data[1]); |
| if ((data[0] == check_data[0]) && (data[1] == check_data[1])) |
| break; |
| } |
| |
| mutex_unlock(&fuelgauge->fg_lock); |
| |
| if (fg_reset) { |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_PROP_CHARGE_ENABLED, value); |
| if (charging_enabled) { |
| value.intval = SEC_BAT_CHG_MODE_CHARGING; |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_PROP_CHARGING_ENABLED, value); |
| } |
| } |
| |
| compliment = (data[1] << 8) | (data[0]); |
| |
| /* data[] store 2's compliment format number */ |
| if (compliment & (0x1 << 15)) { |
| /* Negative */ |
| rsoc = ((~compliment) & 0xFFFF) + 1; |
| rsoc = (rsoc * (-10000)) / (0x1 << 14); |
| } else { |
| rsoc = compliment & 0x7FFF; |
| rsoc = ((rsoc * 10000) / (0x1 << 14)); |
| } |
| |
| if (fg_reset) |
| fuelgauge->diff_soc = fuelgauge->info.soc - rsoc; |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: current_soc (%d), previous soc (%d), diff (%d), FG_mode(%d)\n", |
| __func__, rsoc, fuelgauge->info.soc, fuelgauge->diff_soc, fuelgauge->mode); |
| |
| fuelgauge->info.soc = rsoc + fuelgauge->diff_soc; |
| |
| avg_current = s2mu005_get_avgcurrent(fuelgauge); |
| avg_vbat = s2mu005_get_avgvbat(fuelgauge); |
| vbat = s2mu005_get_vbat(fuelgauge); |
| curr = s2mu005_get_current(fuelgauge); |
| avg_monout_vbat = s2mu005_get_monout_avgvbat(fuelgauge); |
| ocv_pwr_voltagemode = avg_monout_vbat - avg_current * 30 / 100; |
| |
| if (avg_current < (-500)) { |
| rbat = 10; |
| } else { |
| rbat = 30; |
| } |
| |
| ocv_pwr_voltagemode = avg_monout_vbat - avg_current * rbat / 100; |
| |
| if (fuelgauge->revision >= 2) { |
| if ((fuelgauge->info.soc <= 300) || |
| ((ocv_pwr_voltagemode <= 3600) && (avg_current < 10))) { |
| if (fuelgauge->mode == CURRENT_MODE) { /* switch to VOLTAGE_MODE */ |
| fuelgauge->mode = LOW_SOC_VOLTAGE_MODE; |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4A, 0xFF); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: FG is in low soc voltage mode\n", __func__); |
| } |
| } else if ((fuelgauge->info.soc > 325) && ((ocv_pwr_voltagemode > 3650) || |
| (avg_current >= 10))) { |
| if (fuelgauge->mode == LOW_SOC_VOLTAGE_MODE) { |
| fuelgauge->mode = CURRENT_MODE; |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4A, 0x10); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: FG is in current mode\n", __func__); |
| } |
| } |
| |
| psy_do_property("s2mu005-charger", get, POWER_SUPPLY_PROP_VOLTAGE_MAX, value); |
| float_voltage = value.intval; |
| float_voltage = (float_voltage * 996) / 1000; |
| |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_CAPACITY, value); |
| dev_info(&fuelgauge->i2c->dev, "%s: UI SOC = %d\n", __func__, value.intval); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x4A, &fg_mode_reg); |
| |
| dev_info(&fuelgauge->i2c->dev, |
| "%s: fuelgauge->is_charging = %d, avg_vbat = %d, float_voltage = %d, avg_current = %d, 0x4A = 0x%02x\n", |
| __func__, fuelgauge->is_charging, avg_vbat, float_voltage, avg_current, fg_mode_reg); |
| |
| #if defined(CONFIG_S2MU005_VOLT_MODE_TUNING) |
| if(fuelgauge->is_charging == true) { |
| if ((value.intval >= 98) || |
| ((fuelgauge->is_charging == true) && |
| (avg_vbat > float_voltage) && (avg_current < check_current_level(fuelgauge)))) { |
| if (fuelgauge->mode == CURRENT_MODE) { /* switch to VOLTAGE_MODE */ |
| fuelgauge->mode = HIGH_SOC_VOLTAGE_MODE; |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4A, 0xFF); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: FG is in high soc voltage mode\n", __func__); |
| } |
| } |
| } else if (avg_current < -50 || (avg_current >= check_current_level(fuelgauge) + 50)) { |
| #else |
| if ((value.intval >= 98) || |
| ((fuelgauge->is_charging == true) && |
| (avg_vbat > float_voltage) && (avg_current < 500))) { |
| if (fuelgauge->mode == CURRENT_MODE) { /* switch to VOLTAGE_MODE */ |
| fuelgauge->mode = HIGH_SOC_VOLTAGE_MODE; |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4A, 0xFF); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: FG is in high soc voltage mode\n", __func__); |
| } |
| } |
| else if (((avg_current > 550) && (value.intval < 97)) || |
| ((avg_current < 10) && (value.intval < 97))) { |
| #endif |
| if (fuelgauge->mode == HIGH_SOC_VOLTAGE_MODE) { |
| fuelgauge->mode = CURRENT_MODE; |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4A, 0x10); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: FG is in current mode\n", __func__); |
| } |
| } |
| } |
| else { |
| if (!fuelgauge->is_charging && fuelgauge->info.soc <= 300) { |
| if (fuelgauge->mode == CURRENT_MODE) { /* switch to VOLTAGE_MODE */ |
| |
| fuelgauge->mode = LOW_SOC_VOLTAGE_MODE; |
| value.intval = fuelgauge->mode; |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_PROP_SCOPE, value); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp); |
| temp |= 0x01; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x4B, &temp); |
| temp |= 0x02; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4B, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0x00); |
| fuelgauge->vm_soc = fuelgauge->info.soc; |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: FG is in low soc voltage mode: %d\n", |
| __func__, fuelgauge->vm_soc); |
| } |
| } else if (fuelgauge->is_charging && fuelgauge->info.soc >= fuelgauge->vm_soc) { |
| if (fuelgauge->mode == LOW_SOC_VOLTAGE_MODE) { |
| |
| fuelgauge->mode = CURRENT_MODE; |
| value.intval = fuelgauge->mode; |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_PROP_SCOPE, value); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x4B, &temp); |
| temp &= ~0x02; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x4B, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp); |
| temp &= ~0x01; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| temp |= 0x07; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0xCC); |
| dev_info(&fuelgauge->i2c->dev, "%s: FG is in current mode\n", __func__); |
| } |
| } |
| } |
| |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_TEMP, value); |
| fuelgauge->temperature = value.intval; |
| |
| if (fuelgauge->temperature <= (-150)) { |
| force_power_off_voltage = 3550; |
| } else { |
| force_power_off_voltage = 3300; |
| } |
| |
| dev_info(&fuelgauge->i2c->dev, |
| "%s: Fuelgauge Mode: %d, Force power-off voltage: %d\n", |
| __func__, fuelgauge->mode, force_power_off_voltage); |
| |
| if (((avg_current < (-17)) && (curr < (-17))) && |
| ((avg_monout_vbat - avg_current * rbat / 100) <= 3500) && (fuelgauge->info.soc > 100)) { |
| ocv_pwroff = 3300; |
| target_soc = s2mu005_get_soc_from_ocv(fuelgauge, ocv_pwroff); |
| pr_info("%s : F/G reset Start - current flunctuation\n", __func__); |
| WA_0_issue_at_init1(fuelgauge, ocv_pwroff); |
| } else if (avg_current < (-60) && avg_vbat <= force_power_off_voltage) { |
| if (fuelgauge->mode == CURRENT_MODE) { |
| if (abs(avg_vbat - vbat) <= 20 && abs(avg_current - curr) <= 30) { |
| ocv_pwroff = avg_vbat - avg_current * 15 / 100; |
| target_soc = s2mu005_get_soc_from_ocv(fuelgauge, ocv_pwroff); |
| if (abs(target_soc - fuelgauge->info.soc) > 300) { |
| pr_info("%s : F/G reset Start - current mode: %d\n", |
| __func__, target_soc); |
| WA_0_issue_at_init1(fuelgauge, ocv_pwroff); |
| } |
| } |
| } else { |
| if (abs(avg_vbat - vbat) <= 20) { |
| ocv_pwroff = avg_vbat; |
| target_soc = s2mu005_get_soc_from_ocv(fuelgauge, ocv_pwroff); |
| if (abs(target_soc - fuelgauge->info.soc) > 300) { |
| pr_info("%s : F/G reset Start\n", __func__); |
| WA_0_issue_at_init1(fuelgauge, ocv_pwroff); |
| } |
| } |
| } |
| } |
| |
| if (fuelgauge->revision < 2) { |
| /* -------------- for enable/disable Current Sensing -------------- */ |
| if (fuelgauge->mode == CURRENT_MODE) { |
| ocv_100 = avg_vbat - avg_current * 15 / 100; |
| soc_100 = s2mu005_get_soc_from_ocv(fuelgauge, ocv_100); |
| |
| if (fuelgauge->is_charging && avg_current > 0 && fuelgauge->info.soc >= 10000 && fuelgauge->cc_on == true) { |
| fuelgauge->cc_on = false; |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0x00); |
| dev_dbg(&fuelgauge->i2c->dev, "[DEBUG]%s: stop CC, ocv_100: (%d), soc_100: (%d)\n", __func__, ocv_100, soc_100); |
| } else if ((!fuelgauge->is_charging || (fuelgauge->is_charging && avg_current < 0)) |
| && (soc_100 < 10000) && fuelgauge->cc_on == false) { |
| fuelgauge->cc_on = true; |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| temp |= 0x07; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0xCC); |
| dev_dbg(&fuelgauge->i2c->dev, "[DEBUG]%s: start CC, ocv_100: (%d), soc_100: (%d)\n", __func__, ocv_100, soc_100); |
| } |
| } |
| |
| /* -------------- for enable/disable Current Sensing -------------- */ |
| |
| /* For debugging */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x44, &temp); |
| pr_info("%s: Reg 0x44 : 0x%x\n", __func__, temp); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| pr_info("%s: Reg 0x45 : 0x%x\n", __func__, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, &temp); |
| pr_info("%s: Reg 0x26 : 0x%x\n", __func__, temp); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x4B, &temp); |
| pr_info("%s: Reg 0x4B : 0x%x\n", __func__, temp); |
| |
| //bkj - rempcap logging |
| /* ------ read remaining capacity -------- */ |
| if (fuelgauge->mode == CURRENT_MODE) |
| { |
| mutex_lock(&fuelgauge->fg_lock); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x0C, &temp); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x0C, 0x2A); |
| |
| for (i = 0; i < 50; i++) { |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_MONOUT, data) < 0) |
| goto err; |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_MONOUT, check_data) < 0) |
| goto err; |
| |
| dev_dbg(&fuelgauge->i2c->dev, "[DEBUG]%s: remaining capacity data0 (%d) data1 (%d)\n", __func__, data[0], data[1]); |
| if ((data[0] == check_data[0]) && (data[1] == check_data[1])) |
| break; |
| } |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x0C, temp); |
| |
| mutex_unlock(&fuelgauge->fg_lock); |
| |
| compliment = (data[1] << 8) | (data[0]); |
| |
| /* data[] store 2's compliment format number */ |
| if (compliment & (0x1 << 15)) { |
| /* Negative */ |
| rsoc1 = ((~compliment) & 0xFFFF) + 1; |
| rsoc1 = (rsoc1 * (-1)) / (0x1 << 1); |
| } else { |
| rsoc1 = compliment & 0x7FFF; |
| rsoc1 = ((rsoc1 * 1) / (0x1 << 1)); |
| } |
| |
| pr_info("%s: remcap (%d)\n", __func__, rsoc1); |
| } |
| /* ------ read remaining capacity -------- */ |
| } |
| |
| /* S2MU005 FG debug */ |
| if (fuelgauge->pdata->fg_log_enable) |
| s2mu005_fg_test_read(fuelgauge->i2c); |
| |
| return min(fuelgauge->info.soc, 10000); |
| |
| err: |
| mutex_unlock(&fuelgauge->fg_lock); |
| return -EINVAL; |
| } |
| |
| static int s2mu005_get_current(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u16 compliment; |
| int curr = 0; |
| |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_RCUR_CC, data) < 0) |
| return -EINVAL; |
| compliment = (data[1] << 8) | (data[0]); |
| dev_dbg(&fuelgauge->i2c->dev, "%s: rCUR_CC(0x%4x)\n", __func__, compliment); |
| |
| if (compliment & (0x1 << 15)) { /* Charging */ |
| curr = ((~compliment) & 0xFFFF) + 1; |
| curr = (curr * 1000) >> 12; |
| } else { /* dischaging */ |
| curr = compliment & 0x7FFF; |
| curr = (curr * (-1000)) >> 12; |
| } |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: current (%d)mA\n", __func__, curr); |
| |
| return curr; |
| } |
| |
| #define TABLE_SIZE 22 |
| static int s2mu005_get_ocv(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| /* 22 values of mapping table for EVT1*/ |
| |
| int *soc_arr; |
| int *ocv_arr; |
| |
| int soc = fuelgauge->info.soc; |
| int ocv = 0; |
| |
| int high_index = TABLE_SIZE - 1; |
| int low_index = 0; |
| int mid_index = 0; |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| soc_arr = fuelgauge->age_data_info[fuelgauge->fg_age_step].soc_arr_val; |
| ocv_arr = fuelgauge->age_data_info[fuelgauge->fg_age_step].ocv_arr_val; |
| #else |
| if (fuelgauge->revision >= 2) { |
| soc_arr = fuelgauge->info.soc_arr_evt2; |
| ocv_arr = fuelgauge->info.ocv_arr_evt2; |
| } else { |
| soc_arr = fuelgauge->info.soc_arr_evt1; |
| ocv_arr = fuelgauge->info.ocv_arr_evt1; |
| } |
| #endif |
| dev_err(&fuelgauge->i2c->dev, |
| "%s: soc (%d) soc_arr[TABLE_SIZE-1] (%d) ocv_arr[TABLE_SIZE-1) (%d)\n", |
| __func__, soc, soc_arr[TABLE_SIZE-1], ocv_arr[TABLE_SIZE-1]); |
| if (soc <= soc_arr[TABLE_SIZE - 1]) { |
| ocv = ocv_arr[TABLE_SIZE - 1]; |
| goto ocv_soc_mapping; |
| } else if (soc >= soc_arr[0]) { |
| ocv = ocv_arr[0]; |
| goto ocv_soc_mapping; |
| } |
| while (low_index <= high_index) { |
| mid_index = (low_index + high_index) >> 1; |
| if (soc_arr[mid_index] > soc) |
| low_index = mid_index + 1; |
| else if (soc_arr[mid_index] < soc) |
| high_index = mid_index - 1; |
| else { |
| ocv = ocv_arr[mid_index]; |
| goto ocv_soc_mapping; |
| } |
| } |
| ocv = ocv_arr[high_index]; |
| ocv += ((ocv_arr[low_index] - ocv_arr[high_index]) * |
| (soc - soc_arr[high_index])) / |
| (soc_arr[low_index] - soc_arr[high_index]); |
| |
| ocv_soc_mapping: |
| dev_info(&fuelgauge->i2c->dev, "%s: soc (%d), ocv (%d)\n", __func__, soc, ocv); |
| return ocv; |
| } |
| |
| static int s2mu005_get_avgcurrent(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u16 compliment; |
| int curr = 0; |
| |
| mutex_lock(&fuelgauge->fg_lock); |
| |
| if (fuelgauge->revision >= 0x0A) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, S2MU005_REG_MONOUT_SEL, 0x17); |
| } else { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, S2MU005_REG_MONOUT_SEL, 0x26); |
| } |
| |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_MONOUT, data) < 0) |
| goto err; |
| compliment = (data[1] << 8) | (data[0]); |
| dev_dbg(&fuelgauge->i2c->dev, "%s: MONOUT(0x%4x)\n", __func__, compliment); |
| |
| if (compliment & (0x1 << 15)) { /* Charging */ |
| curr = ((~compliment) & 0xFFFF) + 1; |
| curr = (curr * 1000) >> 12; |
| } else { /* dischaging */ |
| curr = compliment & 0x7FFF; |
| curr = (curr * (-1000)) >> 12; |
| } |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, S2MU005_REG_MONOUT_SEL, 0x10); |
| |
| mutex_unlock(&fuelgauge->fg_lock); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: avg current (%d)mA\n", __func__, curr); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: SOC(%d)%%\n", __func__, fuelgauge->info.soc); |
| return curr; |
| |
| err: |
| mutex_unlock(&fuelgauge->fg_lock); |
| return -EINVAL; |
| } |
| |
| static int s2mu005_maintain_avgcurrent( |
| struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| static int cnt; |
| int vcell = 0; |
| int curr = 0; |
| |
| curr = s2mu005_get_avgcurrent(fuelgauge); |
| |
| vcell = s2mu005_get_vbat(fuelgauge); |
| if ((cnt < 10) && (curr < 0) && (fuelgauge->is_charging) && |
| (vcell < 3500)) { |
| curr = 1; |
| cnt++; |
| dev_info(&fuelgauge->i2c->dev, "%s: vcell (%d)mV, modified avg current (%d)mA\n", |
| __func__, vcell, curr); |
| } |
| |
| return curr; |
| } |
| |
| static int s2mu005_get_vbat(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 vbat = 0; |
| |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_RVBAT, data) < 0) |
| return -EINVAL; |
| |
| dev_dbg(&fuelgauge->i2c->dev, "%s: data0 (%d) data1 (%d)\n", __func__, data[0], data[1]); |
| vbat = ((data[0] + (data[1] << 8)) * 1000) >> 13; |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: vbat (%d)\n", __func__, vbat); |
| |
| return vbat; |
| } |
| |
| static int s2mu005_get_monout_avgvbat(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u16 compliment, avg_vbat; |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x40, 0x08); |
| mutex_lock(&fuelgauge->fg_lock); |
| |
| if (fuelgauge->revision >= 0x0A) { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, S2MU005_REG_MONOUT_SEL, 0x16); |
| } else { |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, S2MU005_REG_MONOUT_SEL, 0x27); |
| } |
| |
| msleep(50); |
| |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_MONOUT, data) < 0) |
| goto err; |
| compliment = (data[1] << 8) | (data[0]); |
| |
| avg_vbat = (compliment * 1000) >> 12; |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, S2MU005_REG_MONOUT_SEL, 0x10); |
| |
| mutex_unlock(&fuelgauge->fg_lock); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: avgvbat (%d)\n", __func__, avg_vbat); |
| |
| return avg_vbat; |
| |
| err: |
| mutex_unlock(&fuelgauge->fg_lock); |
| return -EINVAL; |
| } |
| |
| static int s2mu005_get_avgvbat(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| u32 new_vbat, old_vbat = 0; |
| int cnt; |
| |
| for (cnt = 0; cnt < 5; cnt++) { |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_RVBAT, data) < 0) |
| return -EINVAL; |
| |
| new_vbat = ((data[0] + (data[1] << 8)) * 1000) >> 13; |
| |
| if (cnt == 0) |
| old_vbat = new_vbat; |
| else |
| old_vbat = new_vbat / 2 + old_vbat / 2; |
| } |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: avgvbat (%d)\n", __func__, old_vbat); |
| |
| if (fuelgauge->vbatl_mode == VBATL_MODE_SW_VALERT) { |
| union power_supply_propval value = {0, }; |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, value); |
| pr_info("%s: swelling_mode = %d\n", __func__, value.intval); |
| |
| if (((fuelgauge->temperature > (int)fuelgauge->low_temp_limit) && |
| (old_vbat >= fuelgauge->sw_vbat_l_recovery_vol)) || value.intval != 0) { |
| fuelgauge->vbatl_mode = VBATL_MODE_SW_RECOVERY; |
| pr_info("%s : Recover from VBAT_L Activation\n", __func__); |
| } |
| } |
| |
| return old_vbat; |
| } |
| |
| int static s2mu005_set_adc_curroffset_In(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| s32 coffset_old, coffset_new, coffset_old1, coffset_new1; |
| |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_COFFSET, data) < 0) |
| return -EINVAL; |
| |
| coffset_old = data[0] + ((data[1] & 0xF) << 8); |
| fuelgauge->coffset_old = data[0] + (data[1] << 8); |
| |
| if (coffset_old & (0x1 << 11)) { |
| if (coffset_old > 0x852) |
| coffset_new = coffset_old - 82; |
| else |
| coffset_new = 0x800; |
| } else { |
| if (coffset_old > 82) |
| coffset_new = coffset_old - 82; |
| else |
| coffset_new = ((~(82 - coffset_old))&0xFFF) + 1; |
| } |
| |
| data[0] = (coffset_new & 0x0FF); |
| data[1] = ((coffset_new & 0xF00) >> 8) | (data[1] & 0xF0); |
| s2mu005_write_reg(fuelgauge->i2c, S2MU005_REG_COFFSET, data); |
| |
| if (coffset_new & (0x1 << 11)) |
| coffset_new1 = -1 * ((((~coffset_new&0xFFF)+1) * 1000) >> 13); |
| else |
| coffset_new1 = (coffset_new * 1000) >> 13; |
| |
| if (coffset_old & (0x1 << 11)) |
| coffset_old1 = -1 * ((((~coffset_old&0xFFF)+1) * 1000) >> 13); |
| else |
| coffset_old1 = (coffset_old * 1000) >> 13; |
| |
| dev_info(&fuelgauge->i2c->dev, |
| "%s: 0x48[2]=1 -10mA :coffset_old:0x%x, coffset_new:0x%x, coffset_old1:(%d)mA, coffset_new1:(%d)mA\n", |
| __func__, fuelgauge->coffset_old, coffset_new,coffset_old1, coffset_new1); |
| |
| return 0; |
| } |
| |
| int static s2mu005_set_adc_curroffset_out(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data[2]; |
| s32 coffset_old, coffset_new, coffset_old1, coffset_new1; |
| |
| if (s2mu005_read_reg(fuelgauge->i2c, S2MU005_REG_COFFSET, data) < 0) |
| return -EINVAL; |
| |
| coffset_old = data[0] + ((data[1] & 0xF) << 8); |
| fuelgauge->coffset_old = data[0] + (data[1] << 8); |
| |
| coffset_new = coffset_old + 82; |
| coffset_new = coffset_new & 0xFFF; |
| |
| data[0] = (coffset_new & 0x0FF); |
| data[1] = ((coffset_new & 0xF00) >> 8) | (data[1] & 0xF0); |
| s2mu005_write_reg(fuelgauge->i2c, S2MU005_REG_COFFSET, data); |
| |
| if (coffset_new & (0x1 << 11)) |
| coffset_new1 = -1 * ((((~coffset_new&0xFFF)+1) * 1000) >> 13); |
| else |
| coffset_new1 = (coffset_new * 1000) >> 13; |
| |
| if (coffset_old & (0x1 << 11)) |
| coffset_old1 = -1 * ((((~coffset_old&0xFFF)+1) * 1000) >> 13); |
| else |
| coffset_old1 = (coffset_old * 1000) >> 13; |
| |
| dev_info(&fuelgauge->i2c->dev, |
| "%s: 0x48[2]=0 +10mA :coffset_old:0x%x, coffset_new:0x%x, coffset_old1:(%d)mA, coffset_new1:(%d)mA\n", |
| __func__, fuelgauge->coffset_old, coffset_new,coffset_old1, coffset_new1); |
| |
| return 0; |
| } |
| |
| /* capacity is 0.1% unit */ |
| static void s2mu005_fg_get_scaled_capacity( |
| struct s2mu005_fuelgauge_data *fuelgauge, |
| union power_supply_propval *val) |
| { |
| int rawsoc = val->intval; |
| val->intval = (val->intval < fuelgauge->pdata->capacity_min) ? |
| 0 : ((val->intval - fuelgauge->pdata->capacity_min) * 1000 / |
| (fuelgauge->capacity_max - fuelgauge->pdata->capacity_min)); |
| |
| dev_info(&fuelgauge->i2c->dev, |
| "%s: capacity_max(%d) scaled capacity(%d.%d), raw_soc(%d.%d)\n", |
| __func__, fuelgauge->capacity_max, |
| val->intval/10, val->intval%10, rawsoc/10, rawsoc%10); |
| } |
| |
| /* capacity is integer */ |
| static void s2mu005_fg_get_atomic_capacity( |
| struct s2mu005_fuelgauge_data *fuelgauge, |
| union power_supply_propval *val) |
| { |
| if (fuelgauge->pdata->capacity_calculation_type & |
| SEC_FUELGAUGE_CAPACITY_TYPE_ATOMIC) { |
| if (fuelgauge->capacity_old < val->intval) |
| val->intval = fuelgauge->capacity_old + 1; |
| else if (fuelgauge->capacity_old > val->intval) |
| val->intval = fuelgauge->capacity_old - 1; |
| } |
| |
| /* keep SOC stable in abnormal status */ |
| if (fuelgauge->pdata->capacity_calculation_type & |
| SEC_FUELGAUGE_CAPACITY_TYPE_SKIP_ABNORMAL) { |
| if (!fuelgauge->is_charging && |
| fuelgauge->capacity_old < val->intval) { |
| dev_err(&fuelgauge->i2c->dev, |
| "%s: capacity (old %d : new %d)\n", |
| __func__, fuelgauge->capacity_old, val->intval); |
| val->intval = fuelgauge->capacity_old; |
| } |
| } |
| |
| /* updated old capacity */ |
| fuelgauge->capacity_old = val->intval; |
| } |
| |
| static int s2mu005_fg_check_capacity_max( |
| struct s2mu005_fuelgauge_data *fuelgauge, int capacity_max) |
| { |
| int new_capacity_max = capacity_max; |
| |
| if (new_capacity_max < (fuelgauge->pdata->capacity_max - |
| fuelgauge->pdata->capacity_max_margin - 10)) { |
| new_capacity_max = |
| (fuelgauge->pdata->capacity_max - |
| fuelgauge->pdata->capacity_max_margin); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: set capacity max(%d --> %d)\n", |
| __func__, capacity_max, new_capacity_max); |
| } else if (new_capacity_max > (fuelgauge->pdata->capacity_max + |
| fuelgauge->pdata->capacity_max_margin)) { |
| new_capacity_max = |
| (fuelgauge->pdata->capacity_max + |
| fuelgauge->pdata->capacity_max_margin); |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: set capacity max(%d --> %d)\n", |
| __func__, capacity_max, new_capacity_max); |
| } |
| |
| return new_capacity_max; |
| } |
| |
| static int s2mu005_fg_calculate_dynamic_scale( |
| struct s2mu005_fuelgauge_data *fuelgauge, int capacity) |
| { |
| union power_supply_propval raw_soc_val; |
| raw_soc_val.intval = s2mu005_get_rawsoc(fuelgauge) / 10; |
| |
| if (raw_soc_val.intval < |
| fuelgauge->pdata->capacity_max - |
| fuelgauge->pdata->capacity_max_margin) { |
| fuelgauge->capacity_max = |
| fuelgauge->pdata->capacity_max - |
| fuelgauge->pdata->capacity_max_margin; |
| dev_dbg(&fuelgauge->i2c->dev, "%s: capacity_max (%d)", |
| __func__, fuelgauge->capacity_max); |
| } else { |
| fuelgauge->capacity_max = |
| (raw_soc_val.intval > |
| fuelgauge->pdata->capacity_max + |
| fuelgauge->pdata->capacity_max_margin) ? |
| (fuelgauge->pdata->capacity_max + |
| fuelgauge->pdata->capacity_max_margin) : |
| raw_soc_val.intval; |
| dev_dbg(&fuelgauge->i2c->dev, "%s: raw soc (%d)", |
| __func__, fuelgauge->capacity_max); |
| } |
| |
| if (capacity != 100) { |
| fuelgauge->capacity_max = s2mu005_fg_check_capacity_max( |
| fuelgauge, (fuelgauge->capacity_max * 100 / (capacity + 1))); |
| } else { |
| fuelgauge->capacity_max = |
| (fuelgauge->capacity_max * 99 / 100); |
| } |
| |
| /* update capacity_old for sec_fg_get_atomic_capacity algorithm */ |
| fuelgauge->capacity_old = capacity; |
| |
| dev_info(&fuelgauge->i2c->dev, "%s: %d is used for capacity_max\n", |
| __func__, fuelgauge->capacity_max); |
| |
| return fuelgauge->capacity_max; |
| } |
| |
| bool s2mu005_fuelgauge_fuelalert_init(struct i2c_client *client, int soc) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = i2c_get_clientdata(client); |
| u8 data[2]; |
| |
| fuelgauge->is_fuel_alerted = false; |
| |
| /* 1. Set s2mu005 alert configuration. */ |
| s2mu005_alert_init(fuelgauge); |
| |
| if (s2mu005_read_reg(client, S2MU005_REG_IRQ, data) < 0) |
| return -1; |
| |
| /*Enable VBAT, SOC */ |
| data[1] &= 0xfc; |
| |
| /*Disable IDLE_ST, INIT)ST */ |
| data[1] |= 0x0c; |
| |
| s2mu005_write_reg(client, S2MU005_REG_IRQ, data); |
| |
| dev_dbg(&client->dev, "%s: irq_reg(%02x%02x) irq(%d)\n", |
| __func__, data[1], data[0], fuelgauge->pdata->fg_irq); |
| |
| return true; |
| } |
| |
| bool s2mu005_fuelgauge_is_fuelalerted(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| return s2mu005_check_status(fuelgauge->i2c); |
| } |
| |
| bool s2mu005_hal_fg_fuelalert_process(void *irq_data, bool is_fuel_alerted) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = irq_data; |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(fuelgauge->i2c, S2MU005_REG_IRQ, 0x00); |
| if (ret < 0) |
| dev_err(&fuelgauge->i2c->dev, "%s: Error(%d)\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| bool s2mu005_hal_fg_full_charged(struct i2c_client *client) |
| { |
| return true; |
| } |
| |
| static void s2mu005_fg_reset_capacity_by_jig_connection(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| u8 data = 0; |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x48, &data); |
| data |= 0x01; //set 0x48[0]=1 for next boot up initializing fuelgague |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x48, data); |
| |
| pr_info("%s: set 0x48[0] (0x%x)\n", __func__, data); |
| } |
| |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| static int s2mu005_fg_aging_check( |
| struct s2mu005_fuelgauge_data *fuelgauge, int step) |
| { |
| u8 batcap0 = 0, batcap1 = 0, batcap2 = 0, batcap3 = 0; |
| u8 por_state = 0; |
| union power_supply_propval value; |
| int charging_enabled = false; |
| |
| fuelgauge->fg_age_step = step; |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x0F, &batcap0); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x0E, &batcap1); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x11, &batcap2); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x10, &batcap3); |
| |
| pr_info("%s: [Long life] orig. batcap : %02x, %02x, %02x, %02x, fg_age_step data : %02x, %02x, %02x, %02x\n", |
| __func__, batcap0, batcap1, batcap2, batcap3, |
| fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[0], |
| fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[1], |
| fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[2], |
| fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[3]); |
| |
| if ((batcap0 != fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[0]) || |
| (batcap1 != fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[1]) || |
| (batcap2 != fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[2]) || |
| (batcap3 != fuelgauge->age_data_info[fuelgauge->fg_age_step].batcap[3])) { |
| |
| pr_info("%s: [Long life] reset gauge for age forcast, step[%d]\n", __func__, fuelgauge->fg_age_step); |
| |
| fuelgauge->age_reset_status = 1; |
| por_state |= 0x10; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, por_state); |
| |
| /* check charging enable */ |
| psy_do_property("s2mu005-charger", get, POWER_SUPPLY_PROP_CHARGING_ENABLED, value); |
| charging_enabled = value.intval; |
| |
| if (charging_enabled == true) { |
| pr_info("%s: [Long life] disable charger for reset gauge age forcast\n", __func__); |
| value.intval = SEC_BAT_CHG_MODE_CHARGING_OFF; |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_PROP_CHARGING_ENABLED, value); |
| } |
| |
| s2mu005_reset_fg(fuelgauge); |
| |
| if (charging_enabled == true) { |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_STATUS, value); |
| charging_enabled = value.intval; |
| |
| if (charging_enabled == 1) { /* POWER_SUPPLY_STATUS_CHARGING 1 */ |
| pr_info("%s: [Long life] enable charger for reset gauge age forcast\n", __func__); |
| value.intval = SEC_BAT_CHG_MODE_CHARGING; |
| psy_do_property("s2mu005-charger", set, POWER_SUPPLY_PROP_CHARGING_ENABLED, value); |
| } |
| } |
| |
| por_state &= ~0x10; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, por_state); |
| fuelgauge->age_reset_status = 0; |
| |
| return 1; |
| } |
| return 0; |
| } |
| #endif |
| |
| static int s2mu005_fg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = power_supply_get_drvdata(psy); |
| u8 temp = 0; |
| union power_supply_propval ui_soc_val; |
| union power_supply_propval cable_type_val; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| return -ENODATA; |
| case POWER_SUPPLY_PROP_CHARGE_COUNTER: |
| val->intval = fuelgauge->pdata->capacity_full * fuelgauge->raw_capacity; |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| switch (val->intval) { |
| case SEC_BATTERY_CAPACITY_DESIGNED: |
| val->intval = fuelgauge->pdata->capacity_full; |
| break; |
| case SEC_BATTERY_CAPACITY_ABSOLUTE: |
| val->intval = 0; |
| break; |
| case SEC_BATTERY_CAPACITY_TEMPERARY: |
| val->intval = 0; |
| break; |
| case SEC_BATTERY_CAPACITY_CURRENT: |
| val->intval = 0; |
| break; |
| case SEC_BATTERY_CAPACITY_AGEDCELL: |
| val->intval = 0; |
| break; |
| case SEC_BATTERY_CAPACITY_CYCLE: |
| val->intval = 0; |
| break; |
| case SEC_BATTERY_CAPACITY_FULL: |
| val->intval = fuelgauge->pdata->capacity_full; |
| break; |
| |
| } |
| break; |
| /* Cell voltage (VCELL, mV) */ |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = s2mu005_get_vbat(fuelgauge); |
| break; |
| /* Additional Voltage Information (mV) */ |
| case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| switch (val->intval) { |
| case SEC_BATTERY_VOLTAGE_AVERAGE: |
| val->intval = s2mu005_get_avgvbat(fuelgauge); |
| break; |
| case SEC_BATTERY_VOLTAGE_OCV: |
| val->intval = s2mu005_get_ocv(fuelgauge); |
| break; |
| } |
| break; |
| /* Current (mA) */ |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| if (val->intval == SEC_BATTERY_CURRENT_UA) |
| val->intval = s2mu005_get_current(fuelgauge) * 1000; |
| else |
| val->intval = s2mu005_get_current(fuelgauge); |
| break; |
| /* Average Current (mA) */ |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| if (val->intval == SEC_BATTERY_CURRENT_UA) { |
| val->intval = s2mu005_maintain_avgcurrent(fuelgauge) * 1000; |
| } else { |
| val->intval = s2mu005_maintain_avgcurrent(fuelgauge); |
| } |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_RAW) { |
| val->intval = s2mu005_get_rawsoc(fuelgauge); |
| } else if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE) { |
| val->intval = fuelgauge->raw_capacity; |
| } else { |
| val->intval = s2mu005_get_rawsoc(fuelgauge) / 10; |
| |
| if (fuelgauge->pdata->capacity_calculation_type & |
| (SEC_FUELGAUGE_CAPACITY_TYPE_SCALE | |
| SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE)) |
| s2mu005_fg_get_scaled_capacity(fuelgauge, val); |
| |
| /* capacity should be between 0% and 100% |
| * (0.1% degree) |
| */ |
| if (val->intval > 1000) |
| val->intval = 1000; |
| if (val->intval < 0) |
| val->intval = 0; |
| fuelgauge->raw_capacity = val->intval; |
| /* get only integer part */ |
| val->intval /= 10; |
| |
| if (!fuelgauge->is_charging && |
| fuelgauge->vbatl_mode == VBATL_MODE_SW_VALERT && !lpcharge) { |
| pr_info("%s : VBAT_L (low voltage). Decrease SOC\n", __func__); |
| val->intval = 0; |
| } else if ((fuelgauge->vbatl_mode == VBATL_MODE_SW_RECOVERY) && |
| (val->intval == fuelgauge->capacity_old)) { |
| fuelgauge->vbatl_mode = VBATL_MODE_NORMAL; |
| } |
| |
| /* change adc current offset when 100% for EVT1 */ |
| if (fuelgauge->revision < 2) { |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_CAPACITY, ui_soc_val); |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_ONLINE, cable_type_val); |
| dev_info(&fuelgauge->i2c->dev, "%s: UI SOC = %d, cable_type = %d\n", |
| __func__, ui_soc_val.intval, cable_type_val.intval); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x48, &temp); |
| if ((fuelgauge->is_charging == true) && (ui_soc_val.intval >= 100) && !(temp & 0x04)) { |
| if (s2mu005_set_adc_curroffset_In(fuelgauge) < 0) |
| return -EINVAL; |
| temp |= 0x04; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x48, temp); /* 0x48[2]=1 : adc_offset_on */ |
| dev_info(&fuelgauge->i2c->dev, "%s: change coffset to -10mA. 0x48:0x%x\n", __func__, temp); |
| } else if (((cable_type_val.intval == SEC_BATTERY_CABLE_NONE) || |
| (cable_type_val.intval == POWER_SUPPLY_TYPE_UNKNOWN) || |
| (cable_type_val.intval == POWER_SUPPLY_TYPE_OTG)) && |
| (temp & 0x04)) { |
| if (s2mu005_set_adc_curroffset_out(fuelgauge) < 0) |
| return -EINVAL; |
| temp &= ~0x04; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x48, temp); /* 0x48[2]=0 : adc_offset_off */ |
| dev_info(&fuelgauge->i2c->dev, "%s: change coffset to +10mA. 0x48:0x%x\n", __func__, temp); |
| } |
| } |
| |
| /* check whether doing the wake_unlock */ |
| if ((val->intval > fuelgauge->pdata->fuel_alert_soc) && |
| fuelgauge->is_fuel_alerted) { |
| wake_unlock(&fuelgauge->fuel_alert_wake_lock); |
| s2mu005_fuelgauge_fuelalert_init(fuelgauge->i2c, |
| fuelgauge->pdata->fuel_alert_soc); |
| } |
| |
| /* (Only for atomic capacity) |
| * In initial time, capacity_old is 0. |
| * and in resume from sleep, |
| * capacity_old is too different from actual soc. |
| * should update capacity_old |
| * by val->intval in booting or resume. |
| */ |
| if ((fuelgauge->initial_update_of_soc) && |
| (fuelgauge->vbatl_mode != VBATL_MODE_SW_VALERT)) { |
| /* updated old capacity */ |
| fuelgauge->capacity_old = val->intval; |
| fuelgauge->initial_update_of_soc = false; |
| break; |
| } |
| |
| if (fuelgauge->sleep_initial_update_of_soc) { |
| /* updated old capacity in case of resume */ |
| if (fuelgauge->is_charging) { |
| fuelgauge->capacity_old = val->intval; |
| fuelgauge->sleep_initial_update_of_soc = false; |
| break; |
| } else if ((fuelgauge->vbatl_mode != VBATL_MODE_SW_VALERT) && |
| ((!fuelgauge->is_charging) && (fuelgauge->capacity_old >= val->intval))) { |
| fuelgauge->capacity_old = val->intval; |
| fuelgauge->sleep_initial_update_of_soc = false; |
| break; |
| } |
| } |
| |
| if (fuelgauge->pdata->capacity_calculation_type & |
| (SEC_FUELGAUGE_CAPACITY_TYPE_ATOMIC | |
| SEC_FUELGAUGE_CAPACITY_TYPE_SKIP_ABNORMAL)) |
| s2mu005_fg_get_atomic_capacity(fuelgauge, val); |
| } |
| |
| break; |
| /* Battery Temperature */ |
| case POWER_SUPPLY_PROP_TEMP: |
| /* Target Temperature */ |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT: |
| val->intval = s2mu005_get_temperature(fuelgauge); |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: |
| val->intval = fuelgauge->capacity_max; |
| break; |
| case POWER_SUPPLY_PROP_SCOPE: |
| val->intval = fuelgauge->mode; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int s2mu005_fg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| if (val->intval == POWER_SUPPLY_STATUS_FULL) |
| s2mu005_fg_aging_check(fuelgauge, fuelgauge->change_step); |
| #endif |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| if (fuelgauge->pdata->capacity_calculation_type & |
| SEC_FUELGAUGE_CAPACITY_TYPE_DYNAMIC_SCALE) { |
| s2mu005_fg_calculate_dynamic_scale(fuelgauge, val->intval); |
| } |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| fuelgauge->cable_type = val->intval; |
| if (!(val->intval == POWER_SUPPLY_TYPE_BATTERY)) { |
| if (fuelgauge->vbatl_mode >= VBATL_MODE_SW_VALERT) { |
| fuelgauge->vbatl_mode = VBATL_MODE_NORMAL; |
| fuelgauge->initial_update_of_soc = true; |
| } |
| } |
| break; |
| case POWER_SUPPLY_PROP_CHARGING_ENABLED: |
| if (val->intval) { |
| |
| if (fuelgauge->revision >= 3) { |
| u8 reg_0x41 = 0, reg_0x27 = 0, reg_0x26 = 0, temp = 0; |
| pr_info("%s, swelling SOC jump issue W/A\n", __func__); |
| msleep(250); |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x41, ®_0x41); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x27, ®_0x27); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x26, ®_0x26); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x41, 0xFF); |
| temp = reg_0x27; |
| temp &= 0xF0; |
| temp |= 0x0F; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, temp); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, 0xFD); |
| |
| msleep(260); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x26, reg_0x26); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x27, reg_0x27); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x41, reg_0x41); |
| } |
| |
| fuelgauge->is_charging = true; |
| } else |
| fuelgauge->is_charging = false; |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| if (val->intval == SEC_FUELGAUGE_CAPACITY_TYPE_RESET) { |
| s2mu005_restart_gauging(fuelgauge); |
| fuelgauge->initial_update_of_soc = true; |
| } |
| break; |
| case POWER_SUPPLY_PROP_TEMP: |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT: |
| s2mu005_set_temperature(fuelgauge, val->intval); |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| s2mu005_fg_reset_capacity_by_jig_connection(fuelgauge); |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: |
| dev_info(&fuelgauge->i2c->dev, |
| "%s: capacity_max changed, %d -> %d\n", |
| __func__, fuelgauge->capacity_max, val->intval); |
| fuelgauge->capacity_max = s2mu005_fg_check_capacity_max(fuelgauge, val->intval); |
| fuelgauge->initial_update_of_soc = true; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| /* rt5033_fg_reset_capacity_by_jig_connection(fuelgauge->i2c); */ |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_EMPTY: |
| pr_info("%s: WA for battery 0 percent\n", __func__); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x1F, 0x01); |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_AVG: |
| pr_info("%s: WA for power off issue: val(%d)\n", __func__, val->intval); |
| if (val->intval) |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x41, 0x10); /* charger start */ |
| else |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x41, 0x04); /* charger end */ |
| break; |
| #if defined(CONFIG_S2MU005_VOLT_MODE_TUNING) |
| case POWER_SUPPLY_PROP_CURRENT_FULL: |
| fuelgauge->topoff_current = val->intval; |
| break; |
| #endif |
| case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX: |
| { |
| enum power_supply_ext_property ext_psp = psp; |
| u8 temp = 0; |
| switch (ext_psp) { |
| case POWER_SUPPLY_EXT_PROP_INBAT_VOLTAGE_FGSRC_SWITCHING: |
| if (val->intval == SEC_BAT_INBAT_FGSRC_SWITCHING_ON) { |
| /* Get Battery voltage (by I2C control) */ |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x25, &temp); |
| temp &= 0xCF; |
| temp |= 0x10; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x25, temp); |
| msleep(1000); |
| s2mu005_restart_gauging(fuelgauge); |
| s2mu005_fg_reset_capacity_by_jig_connection(fuelgauge); |
| s2mu005_fg_test_read(fuelgauge->i2c); |
| pr_info("%s: SEC_BAT_INBAT_FGSRC_SWITCHING_ON : 0x25 = %x\n", |
| __func__, temp); |
| } else if (val->intval == SEC_BAT_INBAT_FGSRC_SWITCHING_OFF) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x25, &temp); |
| temp &= 0xCF; |
| temp |= 0x30; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x25, temp); |
| msleep(1000); |
| s2mu005_restart_gauging(fuelgauge); |
| s2mu005_fg_test_read(fuelgauge->i2c); |
| pr_info("%s: SEC_BAT_INBAT_FGSRC_SWITCHING_OFF : 0x25 = %x\n", |
| __func__, temp); |
| } |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x25, &temp); |
| pr_info("%s: [%d] Internal switch 0x%x\n", __func__, val->intval, (temp & 0x30) >> 4); |
| break; |
| case POWER_SUPPLY_EXT_PROP_FUELGAUGE_FACTORY: |
| pr_info("%s: [DEBUG_FAC] fuelgauge\n", __func__); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x25, &temp); |
| temp &= 0xCF; |
| temp |= 0x30; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x25, temp); |
| s2mu005_fg_reset_capacity_by_jig_connection(fuelgauge); |
| break; |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| case POWER_SUPPLY_EXT_PROP_UPDATE_BATTERY_DATA: |
| fuelgauge->change_step = val->intval; |
| break; |
| #endif |
| default: |
| return -EINVAL; |
| } |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void s2mu005_fg_isr_work(struct work_struct *work) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = |
| container_of(work, struct s2mu005_fuelgauge_data, isr_work.work); |
| u8 fg_alert_status = 0; |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, S2MU005_REG_STATUS, &fg_alert_status); |
| dev_info(&fuelgauge->i2c->dev, "%s : fg_alert_status(0x%x)\n", |
| __func__, fg_alert_status); |
| |
| fg_alert_status &= 0x03; |
| if (fg_alert_status & 0x01) { |
| pr_info("%s : Battery Level(SOC) is very Low!\n", __func__); |
| } |
| |
| if (fg_alert_status & 0x02) { |
| pr_info("%s : Battery Voltage is Very Low!\n", __func__); |
| } |
| |
| if (!fg_alert_status) { |
| fuelgauge->is_fuel_alerted = false; |
| pr_info("%s : SOC or Voltage is Good!\n", __func__); |
| wake_unlock(&fuelgauge->fuel_alert_wake_lock); |
| } |
| } |
| |
| static irqreturn_t s2mu005_fg_irq_thread(int irq, void *irq_data) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = irq_data; |
| u8 fg_irq = 0; |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, S2MU005_REG_IRQ, &fg_irq); |
| dev_info(&fuelgauge->i2c->dev, "%s: fg_irq(0x%x)\n", |
| __func__, fg_irq); |
| |
| if (fuelgauge->is_fuel_alerted) { |
| return IRQ_HANDLED; |
| } else { |
| wake_lock(&fuelgauge->fuel_alert_wake_lock); |
| fuelgauge->is_fuel_alerted = true; |
| schedule_delayed_work(&fuelgauge->isr_work, 0); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_OF |
| static int s2mu005_fuelgauge_parse_dt(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| struct device_node *np = of_find_node_by_name(NULL, "s2mu005-fuelgauge"); |
| int ret; |
| #if defined(CONFIG_BATTERY_AGE_FORECAST) |
| int i, len; |
| #endif |
| |
| /* reset, irq gpio info */ |
| if (np == NULL) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| fuelgauge->pdata->fg_irq = of_get_named_gpio(np, "fuelgauge,fuel_int", 0); |
| if (fuelgauge->pdata->fg_irq < 0) |
| pr_err("%s error reading fg_irq = %d\n", |
| __func__, fuelgauge->pdata->fg_irq); |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity_max", |
| &fuelgauge->pdata->capacity_max); |
| if (ret < 0) |
| pr_err("%s error reading capacity_max %d\n", __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity_max_margin", |
| &fuelgauge->pdata->capacity_max_margin); |
| if (ret < 0) |
| pr_err("%s error reading capacity_max_margin %d\n", __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity_min", |
| &fuelgauge->pdata->capacity_min); |
| if (ret < 0) |
| pr_err("%s error reading capacity_min %d\n", __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,fuel_alert_vol", |
| &fuelgauge->pdata->fuel_alert_vol); |
| if (ret < 0) { |
| fuelgauge->pdata->fuel_alert_vol = 3300; |
| pr_err("%s Default value of fuel_alert_vol : %d\n", |
| __func__, fuelgauge->pdata->fuel_alert_vol); |
| } |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity_calculation_type", |
| &fuelgauge->pdata->capacity_calculation_type); |
| if (ret < 0) |
| pr_err("%s error reading capacity_calculation_type %d\n", |
| __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,fg_log_enable", |
| &fuelgauge->pdata->fg_log_enable); |
| if (ret < 0) |
| pr_err("%s fg_log_disabled %d\n", __func__, ret); |
| |
| ret = of_property_read_u32(np, "fuelgauge,fuel_alert_soc", |
| &fuelgauge->pdata->fuel_alert_soc); |
| if (ret < 0) |
| pr_err("%s error reading pdata->fuel_alert_soc %d\n", |
| __func__, ret); |
| fuelgauge->pdata->repeated_fuelalert = of_property_read_bool(np, |
| "fuelgauge,repeated_fuelalert"); |
| |
| ret = of_property_read_u32(np, "fuelgauge,low_temp_limit", |
| &fuelgauge->low_temp_limit); |
| if (ret < 0) { |
| pr_err("%s error reading low temp limit %d\n", __func__, ret); |
| fuelgauge->low_temp_limit = 100; |
| } |
| |
| pr_info("%s : LOW TEMP LIMIT(%d)\n", |
| __func__, fuelgauge->low_temp_limit); |
| |
| ret = of_property_read_u32(np, "fuelgauge,sw_vbat_l_recovery_vol", |
| &fuelgauge->sw_vbat_l_recovery_vol); |
| if (ret < 0) { |
| pr_err("%s error reading sw_vbat_l_recovery_vol %d\n", |
| __func__, ret); |
| fuelgauge->sw_vbat_l_recovery_vol = 3465; |
| } |
| |
| pr_info("%s : SW VBAT_L recovery (%d)mV\n", |
| __func__, fuelgauge->sw_vbat_l_recovery_vol); |
| |
| ret = of_property_read_u32(np, "fuelgauge,capacity_full", |
| &fuelgauge->pdata->capacity_full); |
| if (ret < 0) |
| pr_err("%s error reading pdata->capacity_full %d\n", |
| __func__, ret); |
| |
| #if defined(CONFIG_S2MU005_VOLT_MODE_TUNING) |
| /* get topoff info */ |
| np = of_find_node_by_name(NULL, "cable-info"); |
| if (!np) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| ret = of_property_read_u32(np, "full_check_current_1st", |
| &fuelgauge->topoff_current); |
| if (ret < 0) { |
| pr_err("%s fail to get topoff current %d\n", __func__, ret); |
| fuelgauge->topoff_current = 500; |
| } |
| } |
| #endif |
| |
| np = of_find_node_by_name(NULL, "battery"); |
| if (!np) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| ret = of_property_read_string(np, |
| "battery,fuelgauge_name", |
| (char const **)&fuelgauge->pdata->fuelgauge_name); |
| } |
| |
| /* get battery_params node */ |
| np = of_find_node_by_name(NULL, "battery_params"); |
| if (!np) { |
| pr_err("%s battery_params node NULL\n", __func__); |
| } else { |
| #if !defined(CONFIG_BATTERY_AGE_FORECAST) |
| /* get battery_table */ |
| ret = of_property_read_u32_array(np, "battery,battery_table1", fuelgauge->info.battery_table1, 88); |
| if (ret < 0) { |
| pr_err("%s error reading battery,battery_table1\n", __func__); |
| } |
| |
| ret = of_property_read_u32_array(np, "battery,battery_table2", fuelgauge->info.battery_table2, 22); |
| if (ret < 0) { |
| pr_err("%s error reading battery,battery_table2\n", __func__); |
| } |
| |
| ret = of_property_read_u32_array(np, "battery,battery_table3", fuelgauge->info.battery_table3, 88); |
| if (ret < 0) { |
| pr_err("%s error reading battery,battery_table3\n", __func__); |
| } |
| |
| ret = of_property_read_u32_array(np, "battery,battery_table4", fuelgauge->info.battery_table4, 22); |
| if (ret < 0) { |
| pr_err("%s error reading battery,battery_table4\n", __func__); |
| } |
| |
| ret = of_property_read_u32_array(np, "battery,batcap", fuelgauge->info.batcap, 4); |
| if (ret < 0) { |
| pr_err("%s error reading battery,batcap\n", __func__); |
| } |
| |
| ret = of_property_read_u32_array(np, "battery,soc_arr_evt1", fuelgauge->info.soc_arr_evt1, 22); |
| if (ret < 0) { |
| pr_err("%s error reading battery,soc_arr_evt1\n", __func__); |
| } |
| |
| ret = of_property_read_u32_array(np, "battery,ocv_arr_evt1", fuelgauge->info.ocv_arr_evt1, 22); |
| if (ret < 0) { |
| pr_err("%s error reading battery,ocv_arr_evt1\n", __func__); |
| } |
| |
| ret = of_property_read_u32_array(np, "battery,soc_arr_evt2", fuelgauge->info.soc_arr_evt2, 22); |
| if (ret < 0) { |
| pr_err("%s error reading battery,soc_arr_evt2\n", __func__); |
| } |
| |
| ret = of_property_read_u32_array(np, "battery,ocv_arr_evt2", fuelgauge->info.ocv_arr_evt2, 22); |
| if (ret < 0) { |
| pr_err("%s error reading battery,ocv_arr_evt2\n", __func__); |
| } |
| ret = of_property_read_u32_array(np, "battery,FG_Accumulative_rate_evt2", fuelgauge->info.fg_accumulative_rate_evt2, 2); |
| if (ret < 0) { |
| |
| fuelgauge->info.fg_accumulative_rate_evt2[0]=0x00; // REG 0x44 |
| fuelgauge->info.fg_accumulative_rate_evt2[1]=0x08; // REG 0x45 |
| pr_err("%s There is no FG_Accumulative_rate value in DT. set to the default value(0x800)\n", __func__); |
| } |
| #else |
| of_get_property(np, "battery,battery_data", &len); |
| fuelgauge->fg_num_age_step = len / sizeof(fg_age_data_info_t); |
| fuelgauge->age_data_info = kzalloc(len, GFP_KERNEL); |
| ret = of_property_read_u32_array(np, "battery,battery_data", |
| (int *)fuelgauge->age_data_info, len/sizeof(int)); |
| |
| pr_err("%s: [Long life] fuelgauge->fg_num_age_step %d\n", __func__,fuelgauge->fg_num_age_step); |
| |
| if ((sizeof(fg_age_data_info_t) * fuelgauge->fg_num_age_step) != len) { |
| pr_err("%s: The Long life variables and the data in device tree does not match\n", __func__); |
| BUG(); |
| } |
| |
| for (i = 0; i < fuelgauge->fg_num_age_step; i++) { |
| #if defined(CONFIG_S2MU005_VOLT_MODE_TUNING) |
| pr_err("%s: [Long life] age_step = %d, table3[0] %d, table4[0] %d, batcap[0] %02x, accum[0] %02x, soc_arr[0] %d, ocv_arr[0] %d, volt_tun : %02x\n", |
| __func__, i, |
| fuelgauge->age_data_info[i].battery_table3[0], |
| fuelgauge->age_data_info[i].battery_table4[0], |
| fuelgauge->age_data_info[i].batcap[0], |
| fuelgauge->age_data_info[i].accum[0], |
| fuelgauge->age_data_info[i].soc_arr_val[0], |
| fuelgauge->age_data_info[i].ocv_arr_val[0], |
| fuelgauge->age_data_info[i].volt_mode_tunning); |
| #else |
| pr_err("%s: [Long life] age_step = %d, table3[0] %d, table4[0] %d, batcap[0] %02x, accum[0] %02x, soc_arr[0] %d, ocv_arr[0] %d\n", |
| __func__, i, |
| fuelgauge->age_data_info[i].battery_table3[0], |
| fuelgauge->age_data_info[i].battery_table4[0], |
| fuelgauge->age_data_info[i].batcap[0], |
| fuelgauge->age_data_info[i].accum[0], |
| fuelgauge->age_data_info[i].soc_arr_val[0], |
| fuelgauge->age_data_info[i].ocv_arr_val[0]); |
| #endif |
| } |
| #endif |
| /* batt data version */ |
| ret = of_property_read_u32_array(np, "battery,data_ver", &fuelgauge->info.data_ver, 1); |
| if (ret < 0) { |
| pr_err("error reading data_ver %s (%d)\n", "battery,data_ver", ret); |
| fuelgauge->info.data_ver = 0; |
| } |
| pr_info("%s = <%d>\n", "battery,data_ver", fuelgauge->info.data_ver); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct of_device_id s2mu005_fuelgauge_match_table[] = { |
| { .compatible = "samsung,s2mu005-fuelgauge",}, |
| {}, |
| }; |
| #else |
| static int s2mu005_fuelgauge_parse_dt(struct s2mu005_fuelgauge_data *fuelgauge) |
| { |
| return -ENOSYS; |
| } |
| |
| #define s2mu005_fuelgauge_match_table NULL |
| #endif /* CONFIG_OF */ |
| |
| static const struct power_supply_desc s2mu005_fuelgauge_power_supply_desc = { |
| .name = "s2mu005-fuelgauge", |
| .type = POWER_SUPPLY_TYPE_UNKNOWN, |
| .properties = s2mu005_fuelgauge_props, |
| .num_properties = ARRAY_SIZE(s2mu005_fuelgauge_props), |
| .get_property = s2mu005_fg_get_property, |
| .set_property = s2mu005_fg_set_property, |
| }; |
| |
| static int s2mu005_fuelgauge_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| struct s2mu005_fuelgauge_data *fuelgauge; |
| union power_supply_propval raw_soc_val; |
| struct power_supply_config fuelgauge_cfg = {}; |
| int ret = 0; |
| u8 temp = 0; |
| |
| pr_info("%s: S2MU005 Fuelgauge Driver Loading\n", __func__); |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) |
| return -EIO; |
| |
| fuelgauge = kzalloc(sizeof(*fuelgauge), GFP_KERNEL); |
| if (!fuelgauge) |
| return -ENOMEM; |
| |
| mutex_init(&fuelgauge->fg_lock); |
| |
| fuelgauge->i2c = client; |
| |
| if (client->dev.of_node) { |
| fuelgauge->pdata = devm_kzalloc(&client->dev, sizeof(*(fuelgauge->pdata)), |
| GFP_KERNEL); |
| if (!fuelgauge->pdata) { |
| dev_err(&client->dev, "Failed to allocate memory\n"); |
| ret = -ENOMEM; |
| goto err_parse_dt_nomem; |
| } |
| ret = s2mu005_fuelgauge_parse_dt(fuelgauge); |
| if (ret < 0) |
| goto err_parse_dt; |
| } else { |
| fuelgauge->pdata = client->dev.platform_data; |
| } |
| |
| i2c_set_clientdata(client, fuelgauge); |
| |
| if (fuelgauge->pdata->fuelgauge_name == NULL) |
| fuelgauge->pdata->fuelgauge_name = "s2mu005-fuelgauge"; |
| |
| fuelgauge_cfg.drv_data = fuelgauge; |
| |
| if (!fuelgauge->info.data_ver) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x48, &temp); |
| fuelgauge->info.data_ver = (temp & 0x0E) >> 1; |
| } |
| |
| /* 0x48[7:4]=0010 : EVT2 */ |
| fuelgauge->revision = 0; |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x48, &temp); |
| fuelgauge->revision = (temp & 0xF0) >> 4; |
| |
| pr_info("%s: S2MU005 Fuelgauge revision: 0x%x, reg 0x48 = 0x%x\n", |
| __func__, fuelgauge->revision, temp); |
| |
| fuelgauge->capacity_max = fuelgauge->pdata->capacity_max; |
| fuelgauge->info.soc = 0; |
| fuelgauge->mode = CURRENT_MODE; |
| |
| raw_soc_val.intval = s2mu005_get_rawsoc(fuelgauge); |
| raw_soc_val.intval = raw_soc_val.intval / 10; |
| |
| if (raw_soc_val.intval > fuelgauge->capacity_max) |
| s2mu005_fg_calculate_dynamic_scale(fuelgauge, 100); |
| |
| s2mu005_init_regs(fuelgauge); |
| |
| fuelgauge->psy_fg = power_supply_register( |
| &client->dev, &s2mu005_fuelgauge_power_supply_desc, &fuelgauge_cfg); |
| if (!fuelgauge->psy_fg) { |
| pr_err("%s: Failed to Register psy_fg\n", __func__); |
| goto err_data_free; |
| } |
| |
| fuelgauge->is_fuel_alerted = false; |
| if (fuelgauge->pdata->fuel_alert_soc >= 0) { |
| s2mu005_fuelgauge_fuelalert_init(fuelgauge->i2c, |
| fuelgauge->pdata->fuel_alert_soc); |
| wake_lock_init(&fuelgauge->fuel_alert_wake_lock, |
| WAKE_LOCK_SUSPEND, "fuel_alerted"); |
| |
| if (fuelgauge->pdata->fg_irq > 0) { |
| INIT_DELAYED_WORK( |
| &fuelgauge->isr_work, s2mu005_fg_isr_work); |
| |
| fuelgauge->fg_irq = gpio_to_irq(fuelgauge->pdata->fg_irq); |
| dev_info(&client->dev, |
| "%s : fg_irq = %d\n", __func__, fuelgauge->fg_irq); |
| if (fuelgauge->fg_irq > 0) { |
| ret = request_threaded_irq(fuelgauge->fg_irq, |
| NULL, s2mu005_fg_irq_thread, |
| IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
| | IRQF_ONESHOT, |
| "fuelgauge-irq", fuelgauge); |
| if (ret) { |
| dev_err(&client->dev, |
| "%s: Failed to Request IRQ\n", __func__); |
| goto err_supply_unreg; |
| } |
| |
| ret = enable_irq_wake(fuelgauge->fg_irq); |
| if (ret < 0) |
| dev_err(&client->dev, |
| "%s: Failed to Enable Wakeup Source(%d)\n", |
| __func__, ret); |
| } else { |
| dev_err(&client->dev, "%s: Failed gpio_to_irq(%d)\n", |
| __func__, fuelgauge->fg_irq); |
| goto err_supply_unreg; |
| } |
| } |
| } |
| |
| fuelgauge->sleep_initial_update_of_soc = false; |
| fuelgauge->initial_update_of_soc = true; |
| |
| fuelgauge->cc_on = true; |
| fuelgauge->probe_done = true; |
| |
| pr_info("%s: S2MU005 Fuelgauge Driver Loaded\n", __func__); |
| return 0; |
| |
| err_supply_unreg: |
| power_supply_unregister(fuelgauge->psy_fg); |
| err_data_free: |
| if (client->dev.of_node) |
| kfree(fuelgauge->pdata); |
| |
| err_parse_dt: |
| err_parse_dt_nomem: |
| mutex_destroy(&fuelgauge->fg_lock); |
| kfree(fuelgauge); |
| |
| return ret; |
| } |
| |
| static const struct i2c_device_id s2mu005_fuelgauge_id[] = { |
| {"s2mu005-fuelgauge", 0}, |
| {} |
| }; |
| |
| static void s2mu005_fuelgauge_shutdown(struct i2c_client *client) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = i2c_get_clientdata(client); |
| u8 temp = 0; |
| |
| if (fuelgauge->revision < 2) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0x00); |
| } |
| } |
| |
| static int s2mu005_fuelgauge_remove(struct i2c_client *client) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = i2c_get_clientdata(client); |
| |
| if (fuelgauge->pdata->fuel_alert_soc >= 0) |
| wake_lock_destroy(&fuelgauge->fuel_alert_wake_lock); |
| |
| return 0; |
| } |
| |
| #if defined CONFIG_PM |
| static int s2mu005_fuelgauge_suspend(struct device *dev) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = dev_get_drvdata(dev); |
| u8 temp = 0; |
| |
| if (fuelgauge->revision < 2) { |
| if (!fuelgauge->is_charging) { |
| if (fuelgauge->mode == CURRENT_MODE) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| temp |= 0x06; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0xBD); |
| } else { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0x00); |
| } |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x44, &temp); |
| pr_info("%s: Reg set suspend 0x44 : 0x%x\n", |
| __func__, temp); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| pr_info("%s: Reg set suspend 0x45 : 0x%x\n", |
| __func__, temp); |
| } |
| } |
| return 0; |
| } |
| |
| static int s2mu005_fuelgauge_resume(struct device *dev) |
| { |
| struct s2mu005_fuelgauge_data *fuelgauge = dev_get_drvdata(dev); |
| static int avg_vbat[5] = {0, }; |
| static int vbat[5] = {0, }; |
| static int avg_current[5] = {100, 100, 100, 100, 100}; |
| static int loop_count = 0; |
| int target_ocv = 0, target_soc = 0, temp_vol = 0, j = 0, k = 0; |
| u8 temp = 0; |
| |
| if (fuelgauge->revision < 2) { |
| if (fuelgauge->mode == CURRENT_MODE) { |
| avg_current[loop_count] = s2mu005_get_avgcurrent(fuelgauge); |
| avg_vbat[loop_count] = s2mu005_get_avgvbat(fuelgauge); |
| vbat[loop_count] = s2mu005_get_vbat(fuelgauge); |
| |
| if (loop_count++ >= 5) loop_count = 0; |
| |
| for (j = 0; j < 5; j++) { |
| pr_info("%s: abs avergae current : %d\n", __func__, abs(avg_current[j])); |
| if (abs(avg_current[j]) > 30) |
| break; |
| } |
| |
| pr_info("%s: avg current count : %d\n", __func__, j); |
| if (j >= 5) { |
| for (k = 0; k < 5; k++) { |
| if (avg_vbat[k] > vbat[k]) |
| temp_vol = avg_vbat[k]; |
| else |
| temp_vol = vbat[k]; |
| |
| if (temp_vol > target_ocv) |
| target_ocv = temp_vol; |
| } |
| |
| pr_info("%s: target ocv : %d\n", __func__, target_ocv); |
| |
| /* work-around for restart */ |
| fuelgauge->target_ocv = target_ocv; /* max(vbat[5], avgvbat[5]) */ |
| target_soc = s2mu005_get_soc_from_ocv(fuelgauge, fuelgauge->target_ocv); |
| |
| if (abs(target_soc - fuelgauge->info.soc) > 300) |
| WA_0_issue_at_init1(fuelgauge, fuelgauge->target_ocv); |
| } |
| } |
| |
| if (!fuelgauge->is_charging) { |
| if (fuelgauge->mode == CURRENT_MODE) { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| temp |= 0x07; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0xCC); |
| } else { |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| temp &= 0xF0; |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x45, temp); |
| |
| s2mu005_write_and_verify_reg_byte(fuelgauge->i2c, 0x44, 0x00); |
| } |
| } |
| |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x44, &temp); |
| pr_info("%s: Reg set resume 0x44 : 0x%x\n", |
| __func__, temp); |
| s2mu005_read_reg_byte(fuelgauge->i2c, 0x45, &temp); |
| pr_info("%s: Reg set resume 0x45 : 0x%x\n", |
| __func__, temp); |
| } |
| |
| fuelgauge->sleep_initial_update_of_soc = true; |
| |
| return 0; |
| } |
| #else |
| #define s2mu005_fuelgauge_suspend NULL |
| #define s2mu005_fuelgauge_resume NULL |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(s2mu005_fuelgauge_pm_ops, s2mu005_fuelgauge_suspend, |
| s2mu005_fuelgauge_resume); |
| |
| static struct i2c_driver s2mu005_fuelgauge_driver = { |
| .driver = { |
| .name = "s2mu005-fuelgauge", |
| .owner = THIS_MODULE, |
| .pm = &s2mu005_fuelgauge_pm_ops, |
| .of_match_table = s2mu005_fuelgauge_match_table, |
| }, |
| .probe = s2mu005_fuelgauge_probe, |
| .remove = s2mu005_fuelgauge_remove, |
| .shutdown = s2mu005_fuelgauge_shutdown, |
| .id_table = s2mu005_fuelgauge_id, |
| }; |
| |
| static int __init s2mu005_fuelgauge_init(void) |
| { |
| pr_info("%s: S2MU005 Fuelgauge Init\n", __func__); |
| return i2c_add_driver(&s2mu005_fuelgauge_driver); |
| } |
| |
| static void __exit s2mu005_fuelgauge_exit(void) |
| { |
| i2c_del_driver(&s2mu005_fuelgauge_driver); |
| } |
| module_init(s2mu005_fuelgauge_init); |
| module_exit(s2mu005_fuelgauge_exit); |
| |
| MODULE_DESCRIPTION("Samsung S2MU005 Fuel Gauge Driver"); |
| MODULE_AUTHOR("Samsung Electronics"); |
| MODULE_LICENSE("GPL"); |