| Amiga 4-joystick parport extension |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| Parallel port pins: |
| |
| (2) - Up1 (6) - Up2 |
| (3) - Down1 (7) - Down2 |
| (4) - Left1 (8) - Left2 |
| (5) - Right1 (9) - Right2 |
| (13) - Fire1 (11) - Fire2 |
| (18) - Gnd1 (18) - Gnd2 |
| |
| Amiga digital joystick pinout |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| (1) - Up |
| (2) - Down |
| (3) - Left |
| (4) - Right |
| (5) - n/c |
| (6) - Fire button |
| (7) - +5V (50mA) |
| (8) - Gnd |
| (9) - Thumb button |
| |
| Amiga mouse pinout |
| ~~~~~~~~~~~~~~~~~~ |
| (1) - V-pulse |
| (2) - H-pulse |
| (3) - VQ-pulse |
| (4) - HQ-pulse |
| (5) - Middle button |
| (6) - Left button |
| (7) - +5V (50mA) |
| (8) - Gnd |
| (9) - Right button |
| |
| Amiga analog joystick pinout |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| (1) - Top button |
| (2) - Top2 button |
| (3) - Trigger button |
| (4) - Thumb button |
| (5) - Analog X |
| (6) - n/c |
| (7) - +5V (50mA) |
| (8) - Gnd |
| (9) - Analog Y |
| |
| Amiga lightpen pinout |
| ~~~~~~~~~~~~~~~~~~~~~ |
| (1) - n/c |
| (2) - n/c |
| (3) - n/c |
| (4) - n/c |
| (5) - Touch button |
| (6) - /Beamtrigger |
| (7) - +5V (50mA) |
| (8) - Gnd |
| (9) - Stylus button |
| |
| ------------------------------------------------------------------------------- |
| |
| NAME rev ADDR type chip Description |
| JOY0DAT 00A R Denise Joystick-mouse 0 data (left vert, horiz) |
| JOY1DAT 00C R Denise Joystick-mouse 1 data (right vert,horiz) |
| |
| These addresses each read a 16 bit register. These in turn |
| are loaded from the MDAT serial stream and are clocked in on |
| the rising edge of SCLK. MLD output is used to parallel load |
| the external parallel-to-serial converter.This in turn is |
| loaded with the 4 quadrature inputs from each of two game |
| controller ports (8 total) plus 8 miscellaneous control bits |
| which are new for LISA and can be read in upper 8 bits of |
| LISAID. |
| Register bits are as follows: |
| Mouse counter usage (pins 1,3 =Yclock, pins 2,4 =Xclock) |
| |
| BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 |
| JOY0DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 |
| JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 |
| |
| 0=LEFT CONTROLLER PAIR, 1=RIGHT CONTROLLER PAIR. |
| (4 counters total). The bit usage for both left and right |
| addresses is shown below. Each 6 bit counter (Y7-Y2,X7-X2) is |
| clocked by 2 of the signals input from the mouse serial |
| stream. Starting with first bit received: |
| |
| +-------------------+-----------------------------------------+ |
| | Serial | Bit Name | Description | |
| +--------+----------+-----------------------------------------+ |
| | 0 | M0H | JOY0DAT Horizontal Clock | |
| | 1 | M0HQ | JOY0DAT Horizontal Clock (quadrature) | |
| | 2 | M0V | JOY0DAT Vertical Clock | |
| | 3 | M0VQ | JOY0DAT Vertical Clock (quadrature) | |
| | 4 | M1V | JOY1DAT Horizontall Clock | |
| | 5 | M1VQ | JOY1DAT Horizontall Clock (quadrature) | |
| | 6 | M1V | JOY1DAT Vertical Clock | |
| | 7 | M1VQ | JOY1DAT Vertical Clock (quadrature) | |
| +--------+----------+-----------------------------------------+ |
| |
| Bits 1 and 0 of each counter (Y1-Y0,X1-X0) may be |
| read to determine the state of the related input signal pair. |
| This allows these pins to double as joystick switch inputs. |
| Joystick switch closures can be deciphered as follows: |
| |
| +------------+------+---------------------------------+ |
| | Directions | Pin# | Counter bits | |
| +------------+------+---------------------------------+ |
| | Forward | 1 | Y1 xor Y0 (BIT#09 xor BIT#08) | |
| | Left | 3 | Y1 | |
| | Back | 2 | X1 xor X0 (BIT#01 xor BIT#00) | |
| | Right | 4 | X1 | |
| +------------+------+---------------------------------+ |
| |
| ------------------------------------------------------------------------------- |
| |
| NAME rev ADDR type chip Description |
| JOYTEST 036 W Denise Write to all 4 joystick-mouse counters at once. |
| |
| Mouse counter write test data: |
| BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 |
| JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx |
| JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx |
| |
| ------------------------------------------------------------------------------- |
| |
| NAME rev ADDR type chip Description |
| POT0DAT h 012 R Paula Pot counter data left pair (vert, horiz) |
| POT1DAT h 014 R Paula Pot counter data right pair (vert,horiz) |
| |
| These addresses each read a pair of 8 bit pot counters. |
| (4 counters total). The bit assignment for both |
| addresses is shown below. The counters are stopped by signals |
| from 2 controller connectors (left-right) with 2 pins each. |
| |
| BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 |
| RIGHT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 |
| LEFT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 |
| |
| +--------------------------+-------+ |
| | CONNECTORS | PAULA | |
| +-------+------+-----+-----+-------+ |
| | Loc. | Dir. | Sym | pin | pin | |
| +-------+------+-----+-----+-------+ |
| | RIGHT | Y | RX | 9 | 33 | |
| | RIGHT | X | RX | 5 | 32 | |
| | LEFT | Y | LY | 9 | 36 | |
| | LEFT | X | LX | 5 | 35 | |
| +-------+------+-----+-----+-------+ |
| |
| With normal (NTSC or PAL) horiz. line rate, the pots will |
| give a full scale (FF) reading with about 500kohms in one |
| frame time. With proportionally faster horiz line times, |
| the counters will count proportionally faster. |
| This should be noted when doing variable beam displays. |
| |
| ------------------------------------------------------------------------------- |
| |
| NAME rev ADDR type chip Description |
| POTGO 034 W Paula Pot port (4 bit) bi-direction and data, and pot counter start. |
| |
| ------------------------------------------------------------------------------- |
| |
| NAME rev ADDR type chip Description |
| POTINP 016 R Paula Pot pin data read |
| |
| This register controls a 4 bit bi-direction I/O port |
| that shares the same 4 pins as the 4 pot counters above. |
| |
| +-------+----------+---------------------------------------------+ |
| | BIT# | FUNCTION | DESCRIPTION | |
| +-------+----------+---------------------------------------------+ |
| | 15 | OUTRY | Output enable for Paula pin 33 | |
| | 14 | DATRY | I/O data Paula pin 33 | |
| | 13 | OUTRX | Output enable for Paula pin 32 | |
| | 12 | DATRX | I/O data Paula pin 32 | |
| | 11 | OUTLY | Out put enable for Paula pin 36 | |
| | 10 | DATLY | I/O data Paula pin 36 | |
| | 09 | OUTLX | Output enable for Paula pin 35 | |
| | 08 | DATLX | I/O data Paula pin 35 | |
| | 07-01 | X | Not used | |
| | 00 | START | Start pots (dump capacitors,start counters) | |
| +-------+----------+---------------------------------------------+ |
| |
| ------------------------------------------------------------------------------- |