| /* |
| * libahci.c - Common AHCI SATA low-level routines |
| * |
| * Maintained by: Tejun Heo <tj@kernel.org> |
| * Please ALWAYS copy linux-ide@vger.kernel.org |
| * on emails. |
| * |
| * Copyright 2004-2005 Red Hat, Inc. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, write to |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * |
| * libata documentation is available via 'make {ps|pdf}docs', |
| * as Documentation/DocBook/libata.* |
| * |
| * AHCI hardware documentation: |
| * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf |
| * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/gfp.h> |
| #include <linux/module.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <linux/libata.h> |
| #include "ahci.h" |
| #include "libata.h" |
| |
| static int ahci_skip_host_reset; |
| int ahci_ignore_sss; |
| EXPORT_SYMBOL_GPL(ahci_ignore_sss); |
| |
| module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); |
| MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); |
| |
| module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); |
| MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); |
| |
| static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, |
| unsigned hints); |
| static ssize_t ahci_led_show(struct ata_port *ap, char *buf); |
| static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, |
| size_t size); |
| static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, |
| ssize_t size); |
| |
| |
| |
| static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); |
| static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); |
| static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); |
| static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); |
| static int ahci_port_start(struct ata_port *ap); |
| static void ahci_port_stop(struct ata_port *ap); |
| static void ahci_qc_prep(struct ata_queued_cmd *qc); |
| static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc); |
| static void ahci_freeze(struct ata_port *ap); |
| static void ahci_thaw(struct ata_port *ap); |
| static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep); |
| static void ahci_enable_fbs(struct ata_port *ap); |
| static void ahci_disable_fbs(struct ata_port *ap); |
| static void ahci_pmp_attach(struct ata_port *ap); |
| static void ahci_pmp_detach(struct ata_port *ap); |
| static int ahci_softreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline); |
| static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline); |
| static int ahci_hardreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline); |
| static void ahci_postreset(struct ata_link *link, unsigned int *class); |
| static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); |
| static void ahci_dev_config(struct ata_device *dev); |
| #ifdef CONFIG_PM |
| static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); |
| #endif |
| static ssize_t ahci_activity_show(struct ata_device *dev, char *buf); |
| static ssize_t ahci_activity_store(struct ata_device *dev, |
| enum sw_activity val); |
| static void ahci_init_sw_activity(struct ata_link *link); |
| |
| static ssize_t ahci_show_host_caps(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static ssize_t ahci_show_host_cap2(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static ssize_t ahci_show_host_version(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static ssize_t ahci_show_port_cmd(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static ssize_t ahci_read_em_buffer(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static ssize_t ahci_store_em_buffer(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size); |
| static ssize_t ahci_show_em_supported(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| |
| static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); |
| static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); |
| static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); |
| static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); |
| static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO, |
| ahci_read_em_buffer, ahci_store_em_buffer); |
| static DEVICE_ATTR(em_message_supported, S_IRUGO, ahci_show_em_supported, NULL); |
| |
| struct device_attribute *ahci_shost_attrs[] = { |
| &dev_attr_link_power_management_policy, |
| &dev_attr_em_message_type, |
| &dev_attr_em_message, |
| &dev_attr_ahci_host_caps, |
| &dev_attr_ahci_host_cap2, |
| &dev_attr_ahci_host_version, |
| &dev_attr_ahci_port_cmd, |
| &dev_attr_em_buffer, |
| &dev_attr_em_message_supported, |
| NULL |
| }; |
| EXPORT_SYMBOL_GPL(ahci_shost_attrs); |
| |
| struct device_attribute *ahci_sdev_attrs[] = { |
| &dev_attr_sw_activity, |
| &dev_attr_unload_heads, |
| NULL |
| }; |
| EXPORT_SYMBOL_GPL(ahci_sdev_attrs); |
| |
| struct ata_port_operations ahci_ops = { |
| .inherits = &sata_pmp_port_ops, |
| |
| .qc_defer = ahci_pmp_qc_defer, |
| .qc_prep = ahci_qc_prep, |
| .qc_issue = ahci_qc_issue, |
| .qc_fill_rtf = ahci_qc_fill_rtf, |
| |
| .freeze = ahci_freeze, |
| .thaw = ahci_thaw, |
| .softreset = ahci_softreset, |
| .hardreset = ahci_hardreset, |
| .postreset = ahci_postreset, |
| .pmp_softreset = ahci_softreset, |
| .error_handler = ahci_error_handler, |
| .post_internal_cmd = ahci_post_internal_cmd, |
| .dev_config = ahci_dev_config, |
| |
| .scr_read = ahci_scr_read, |
| .scr_write = ahci_scr_write, |
| .pmp_attach = ahci_pmp_attach, |
| .pmp_detach = ahci_pmp_detach, |
| |
| .set_lpm = ahci_set_lpm, |
| .em_show = ahci_led_show, |
| .em_store = ahci_led_store, |
| .sw_activity_show = ahci_activity_show, |
| .sw_activity_store = ahci_activity_store, |
| .transmit_led_message = ahci_transmit_led_message, |
| #ifdef CONFIG_PM |
| .port_suspend = ahci_port_suspend, |
| .port_resume = ahci_port_resume, |
| #endif |
| .port_start = ahci_port_start, |
| .port_stop = ahci_port_stop, |
| }; |
| EXPORT_SYMBOL_GPL(ahci_ops); |
| |
| struct ata_port_operations ahci_pmp_retry_srst_ops = { |
| .inherits = &ahci_ops, |
| .softreset = ahci_pmp_retry_softreset, |
| }; |
| EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops); |
| |
| static bool ahci_em_messages __read_mostly = true; |
| EXPORT_SYMBOL_GPL(ahci_em_messages); |
| module_param(ahci_em_messages, bool, 0444); |
| /* add other LED protocol types when they become supported */ |
| MODULE_PARM_DESC(ahci_em_messages, |
| "AHCI Enclosure Management Message control (0 = off, 1 = on)"); |
| |
| /* device sleep idle timeout in ms */ |
| static int devslp_idle_timeout __read_mostly = 1000; |
| module_param(devslp_idle_timeout, int, 0644); |
| MODULE_PARM_DESC(devslp_idle_timeout, "device sleep idle timeout"); |
| |
| static void ahci_enable_ahci(void __iomem *mmio) |
| { |
| int i; |
| u32 tmp; |
| |
| /* turn on AHCI_EN */ |
| tmp = readl(mmio + HOST_CTL); |
| if (tmp & HOST_AHCI_EN) |
| return; |
| |
| /* Some controllers need AHCI_EN to be written multiple times. |
| * Try a few times before giving up. |
| */ |
| for (i = 0; i < 5; i++) { |
| tmp |= HOST_AHCI_EN; |
| writel(tmp, mmio + HOST_CTL); |
| tmp = readl(mmio + HOST_CTL); /* flush && sanity check */ |
| if (tmp & HOST_AHCI_EN) |
| return; |
| msleep(10); |
| } |
| |
| WARN_ON(1); |
| } |
| |
| static ssize_t ahci_show_host_caps(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ata_port *ap = ata_shost_to_port(shost); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| |
| return sprintf(buf, "%x\n", hpriv->cap); |
| } |
| |
| static ssize_t ahci_show_host_cap2(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ata_port *ap = ata_shost_to_port(shost); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| |
| return sprintf(buf, "%x\n", hpriv->cap2); |
| } |
| |
| static ssize_t ahci_show_host_version(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ata_port *ap = ata_shost_to_port(shost); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| |
| return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION)); |
| } |
| |
| static ssize_t ahci_show_port_cmd(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ata_port *ap = ata_shost_to_port(shost); |
| void __iomem *port_mmio = ahci_port_base(ap); |
| |
| return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD)); |
| } |
| |
| static ssize_t ahci_read_em_buffer(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ata_port *ap = ata_shost_to_port(shost); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| void __iomem *em_mmio = mmio + hpriv->em_loc; |
| u32 em_ctl, msg; |
| unsigned long flags; |
| size_t count; |
| int i; |
| |
| spin_lock_irqsave(ap->lock, flags); |
| |
| em_ctl = readl(mmio + HOST_EM_CTL); |
| if (!(ap->flags & ATA_FLAG_EM) || em_ctl & EM_CTL_XMT || |
| !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO)) { |
| spin_unlock_irqrestore(ap->lock, flags); |
| return -EINVAL; |
| } |
| |
| if (!(em_ctl & EM_CTL_MR)) { |
| spin_unlock_irqrestore(ap->lock, flags); |
| return -EAGAIN; |
| } |
| |
| if (!(em_ctl & EM_CTL_SMB)) |
| em_mmio += hpriv->em_buf_sz; |
| |
| count = hpriv->em_buf_sz; |
| |
| /* the count should not be larger than PAGE_SIZE */ |
| if (count > PAGE_SIZE) { |
| if (printk_ratelimit()) |
| ata_port_warn(ap, |
| "EM read buffer size too large: " |
| "buffer size %u, page size %lu\n", |
| hpriv->em_buf_sz, PAGE_SIZE); |
| count = PAGE_SIZE; |
| } |
| |
| for (i = 0; i < count; i += 4) { |
| msg = readl(em_mmio + i); |
| buf[i] = msg & 0xff; |
| buf[i + 1] = (msg >> 8) & 0xff; |
| buf[i + 2] = (msg >> 16) & 0xff; |
| buf[i + 3] = (msg >> 24) & 0xff; |
| } |
| |
| spin_unlock_irqrestore(ap->lock, flags); |
| |
| return i; |
| } |
| |
| static ssize_t ahci_store_em_buffer(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ata_port *ap = ata_shost_to_port(shost); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| void __iomem *em_mmio = mmio + hpriv->em_loc; |
| const unsigned char *msg_buf = buf; |
| u32 em_ctl, msg; |
| unsigned long flags; |
| int i; |
| |
| /* check size validity */ |
| if (!(ap->flags & ATA_FLAG_EM) || |
| !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO) || |
| size % 4 || size > hpriv->em_buf_sz) |
| return -EINVAL; |
| |
| spin_lock_irqsave(ap->lock, flags); |
| |
| em_ctl = readl(mmio + HOST_EM_CTL); |
| if (em_ctl & EM_CTL_TM) { |
| spin_unlock_irqrestore(ap->lock, flags); |
| return -EBUSY; |
| } |
| |
| for (i = 0; i < size; i += 4) { |
| msg = msg_buf[i] | msg_buf[i + 1] << 8 | |
| msg_buf[i + 2] << 16 | msg_buf[i + 3] << 24; |
| writel(msg, em_mmio + i); |
| } |
| |
| writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); |
| |
| spin_unlock_irqrestore(ap->lock, flags); |
| |
| return size; |
| } |
| |
| static ssize_t ahci_show_em_supported(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ata_port *ap = ata_shost_to_port(shost); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| u32 em_ctl; |
| |
| em_ctl = readl(mmio + HOST_EM_CTL); |
| |
| return sprintf(buf, "%s%s%s%s\n", |
| em_ctl & EM_CTL_LED ? "led " : "", |
| em_ctl & EM_CTL_SAFTE ? "saf-te " : "", |
| em_ctl & EM_CTL_SES ? "ses-2 " : "", |
| em_ctl & EM_CTL_SGPIO ? "sgpio " : ""); |
| } |
| |
| /** |
| * ahci_save_initial_config - Save and fixup initial config values |
| * @dev: target AHCI device |
| * @hpriv: host private area to store config values |
| * @force_port_map: force port map to a specified value |
| * @mask_port_map: mask out particular bits from port map |
| * |
| * Some registers containing configuration info might be setup by |
| * BIOS and might be cleared on reset. This function saves the |
| * initial values of those registers into @hpriv such that they |
| * can be restored after controller reset. |
| * |
| * If inconsistent, config values are fixed up by this function. |
| * |
| * If it is not set already this function sets hpriv->start_engine to |
| * ahci_start_engine. |
| * |
| * LOCKING: |
| * None. |
| */ |
| void ahci_save_initial_config(struct device *dev, |
| struct ahci_host_priv *hpriv, |
| unsigned int force_port_map, |
| unsigned int mask_port_map) |
| { |
| void __iomem *mmio = hpriv->mmio; |
| u32 cap, cap2, vers, port_map; |
| int i; |
| |
| /* make sure AHCI mode is enabled before accessing CAP */ |
| ahci_enable_ahci(mmio); |
| |
| /* Values prefixed with saved_ are written back to host after |
| * reset. Values without are used for driver operation. |
| */ |
| hpriv->saved_cap = cap = readl(mmio + HOST_CAP); |
| hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); |
| |
| /* CAP2 register is only defined for AHCI 1.2 and later */ |
| vers = readl(mmio + HOST_VERSION); |
| if ((vers >> 16) > 1 || |
| ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200)) |
| hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2); |
| else |
| hpriv->saved_cap2 = cap2 = 0; |
| |
| /* some chips have errata preventing 64bit use */ |
| if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { |
| dev_info(dev, "controller can't do 64bit DMA, forcing 32bit\n"); |
| cap &= ~HOST_CAP_64; |
| } |
| |
| if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) { |
| dev_info(dev, "controller can't do NCQ, turning off CAP_NCQ\n"); |
| cap &= ~HOST_CAP_NCQ; |
| } |
| |
| if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { |
| dev_info(dev, "controller can do NCQ, turning on CAP_NCQ\n"); |
| cap |= HOST_CAP_NCQ; |
| } |
| |
| if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { |
| dev_info(dev, "controller can't do PMP, turning off CAP_PMP\n"); |
| cap &= ~HOST_CAP_PMP; |
| } |
| |
| if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) { |
| dev_info(dev, |
| "controller can't do SNTF, turning off CAP_SNTF\n"); |
| cap &= ~HOST_CAP_SNTF; |
| } |
| |
| if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) { |
| dev_info(dev, "controller can do FBS, turning on CAP_FBS\n"); |
| cap |= HOST_CAP_FBS; |
| } |
| |
| if (force_port_map && port_map != force_port_map) { |
| dev_info(dev, "forcing port_map 0x%x -> 0x%x\n", |
| port_map, force_port_map); |
| port_map = force_port_map; |
| } |
| |
| if (mask_port_map) { |
| dev_warn(dev, "masking port_map 0x%x -> 0x%x\n", |
| port_map, |
| port_map & mask_port_map); |
| port_map &= mask_port_map; |
| } |
| |
| /* cross check port_map and cap.n_ports */ |
| if (port_map) { |
| int map_ports = 0; |
| |
| for (i = 0; i < AHCI_MAX_PORTS; i++) |
| if (port_map & (1 << i)) |
| map_ports++; |
| |
| /* If PI has more ports than n_ports, whine, clear |
| * port_map and let it be generated from n_ports. |
| */ |
| if (map_ports > ahci_nr_ports(cap)) { |
| dev_warn(dev, |
| "implemented port map (0x%x) contains more ports than nr_ports (%u), using nr_ports\n", |
| port_map, ahci_nr_ports(cap)); |
| port_map = 0; |
| } |
| } |
| |
| /* fabricate port_map from cap.nr_ports */ |
| if (!port_map) { |
| port_map = (1 << ahci_nr_ports(cap)) - 1; |
| dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map); |
| |
| /* write the fixed up value to the PI register */ |
| hpriv->saved_port_map = port_map; |
| } |
| |
| /* record values to use during operation */ |
| hpriv->cap = cap; |
| hpriv->cap2 = cap2; |
| hpriv->port_map = port_map; |
| |
| if (!hpriv->start_engine) |
| hpriv->start_engine = ahci_start_engine; |
| } |
| EXPORT_SYMBOL_GPL(ahci_save_initial_config); |
| |
| /** |
| * ahci_restore_initial_config - Restore initial config |
| * @host: target ATA host |
| * |
| * Restore initial config stored by ahci_save_initial_config(). |
| * |
| * LOCKING: |
| * None. |
| */ |
| static void ahci_restore_initial_config(struct ata_host *host) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| |
| writel(hpriv->saved_cap, mmio + HOST_CAP); |
| if (hpriv->saved_cap2) |
| writel(hpriv->saved_cap2, mmio + HOST_CAP2); |
| writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); |
| (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ |
| } |
| |
| static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) |
| { |
| static const int offset[] = { |
| [SCR_STATUS] = PORT_SCR_STAT, |
| [SCR_CONTROL] = PORT_SCR_CTL, |
| [SCR_ERROR] = PORT_SCR_ERR, |
| [SCR_ACTIVE] = PORT_SCR_ACT, |
| [SCR_NOTIFICATION] = PORT_SCR_NTF, |
| }; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| |
| if (sc_reg < ARRAY_SIZE(offset) && |
| (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF))) |
| return offset[sc_reg]; |
| return 0; |
| } |
| |
| static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) |
| { |
| void __iomem *port_mmio = ahci_port_base(link->ap); |
| int offset = ahci_scr_offset(link->ap, sc_reg); |
| |
| if (offset) { |
| *val = readl(port_mmio + offset); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) |
| { |
| void __iomem *port_mmio = ahci_port_base(link->ap); |
| int offset = ahci_scr_offset(link->ap, sc_reg); |
| |
| if (offset) { |
| writel(val, port_mmio + offset); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| void ahci_start_engine(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 tmp; |
| |
| /* start DMA */ |
| tmp = readl(port_mmio + PORT_CMD); |
| tmp |= PORT_CMD_START; |
| writel(tmp, port_mmio + PORT_CMD); |
| readl(port_mmio + PORT_CMD); /* flush */ |
| } |
| EXPORT_SYMBOL_GPL(ahci_start_engine); |
| |
| int ahci_stop_engine(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 tmp; |
| |
| tmp = readl(port_mmio + PORT_CMD); |
| |
| /* check if the HBA is idle */ |
| if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) |
| return 0; |
| |
| /* setting HBA to idle */ |
| tmp &= ~PORT_CMD_START; |
| writel(tmp, port_mmio + PORT_CMD); |
| |
| /* wait for engine to stop. This could be as long as 500 msec */ |
| tmp = ata_wait_register(ap, port_mmio + PORT_CMD, |
| PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); |
| if (tmp & PORT_CMD_LIST_ON) |
| return -EIO; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ahci_stop_engine); |
| |
| static void ahci_start_fis_rx(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| u32 tmp; |
| |
| /* set FIS registers */ |
| if (hpriv->cap & HOST_CAP_64) |
| writel((pp->cmd_slot_dma >> 16) >> 16, |
| port_mmio + PORT_LST_ADDR_HI); |
| writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); |
| |
| if (hpriv->cap & HOST_CAP_64) |
| writel((pp->rx_fis_dma >> 16) >> 16, |
| port_mmio + PORT_FIS_ADDR_HI); |
| writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); |
| |
| /* enable FIS reception */ |
| tmp = readl(port_mmio + PORT_CMD); |
| tmp |= PORT_CMD_FIS_RX; |
| writel(tmp, port_mmio + PORT_CMD); |
| |
| /* flush */ |
| readl(port_mmio + PORT_CMD); |
| } |
| |
| static int ahci_stop_fis_rx(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 tmp; |
| |
| /* disable FIS reception */ |
| tmp = readl(port_mmio + PORT_CMD); |
| tmp &= ~PORT_CMD_FIS_RX; |
| writel(tmp, port_mmio + PORT_CMD); |
| |
| /* wait for completion, spec says 500ms, give it 1000 */ |
| tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_FIS_ON, |
| PORT_CMD_FIS_ON, 10, 1000); |
| if (tmp & PORT_CMD_FIS_ON) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static void ahci_power_up(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 cmd; |
| |
| cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; |
| |
| /* spin up device */ |
| if (hpriv->cap & HOST_CAP_SSS) { |
| cmd |= PORT_CMD_SPIN_UP; |
| writel(cmd, port_mmio + PORT_CMD); |
| } |
| |
| /* wake up link */ |
| writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); |
| } |
| |
| static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, |
| unsigned int hints) |
| { |
| struct ata_port *ap = link->ap; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| |
| if (policy != ATA_LPM_MAX_POWER) { |
| /* |
| * Disable interrupts on Phy Ready. This keeps us from |
| * getting woken up due to spurious phy ready |
| * interrupts. |
| */ |
| pp->intr_mask &= ~PORT_IRQ_PHYRDY; |
| writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
| |
| sata_link_scr_lpm(link, policy, false); |
| } |
| |
| if (hpriv->cap & HOST_CAP_ALPM) { |
| u32 cmd = readl(port_mmio + PORT_CMD); |
| |
| if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) { |
| cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE); |
| cmd |= PORT_CMD_ICC_ACTIVE; |
| |
| writel(cmd, port_mmio + PORT_CMD); |
| readl(port_mmio + PORT_CMD); |
| |
| /* wait 10ms to be sure we've come out of LPM state */ |
| ata_msleep(ap, 10); |
| } else { |
| cmd |= PORT_CMD_ALPE; |
| if (policy == ATA_LPM_MIN_POWER) |
| cmd |= PORT_CMD_ASP; |
| |
| /* write out new cmd value */ |
| writel(cmd, port_mmio + PORT_CMD); |
| } |
| } |
| |
| /* set aggressive device sleep */ |
| if ((hpriv->cap2 & HOST_CAP2_SDS) && |
| (hpriv->cap2 & HOST_CAP2_SADM) && |
| (link->device->flags & ATA_DFLAG_DEVSLP)) { |
| if (policy == ATA_LPM_MIN_POWER) |
| ahci_set_aggressive_devslp(ap, true); |
| else |
| ahci_set_aggressive_devslp(ap, false); |
| } |
| |
| if (policy == ATA_LPM_MAX_POWER) { |
| sata_link_scr_lpm(link, policy, false); |
| |
| /* turn PHYRDY IRQ back on */ |
| pp->intr_mask |= PORT_IRQ_PHYRDY; |
| writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static void ahci_power_down(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 cmd, scontrol; |
| |
| if (!(hpriv->cap & HOST_CAP_SSS)) |
| return; |
| |
| /* put device into listen mode, first set PxSCTL.DET to 0 */ |
| scontrol = readl(port_mmio + PORT_SCR_CTL); |
| scontrol &= ~0xf; |
| writel(scontrol, port_mmio + PORT_SCR_CTL); |
| |
| /* then set PxCMD.SUD to 0 */ |
| cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; |
| cmd &= ~PORT_CMD_SPIN_UP; |
| writel(cmd, port_mmio + PORT_CMD); |
| } |
| #endif |
| |
| static void ahci_start_port(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ata_link *link; |
| struct ahci_em_priv *emp; |
| ssize_t rc; |
| int i; |
| |
| /* enable FIS reception */ |
| ahci_start_fis_rx(ap); |
| |
| /* enable DMA */ |
| if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE)) |
| hpriv->start_engine(ap); |
| |
| /* turn on LEDs */ |
| if (ap->flags & ATA_FLAG_EM) { |
| ata_for_each_link(link, ap, EDGE) { |
| emp = &pp->em_priv[link->pmp]; |
| |
| /* EM Transmit bit maybe busy during init */ |
| for (i = 0; i < EM_MAX_RETRY; i++) { |
| rc = ap->ops->transmit_led_message(ap, |
| emp->led_state, |
| 4); |
| /* |
| * If busy, give a breather but do not |
| * release EH ownership by using msleep() |
| * instead of ata_msleep(). EM Transmit |
| * bit is busy for the whole host and |
| * releasing ownership will cause other |
| * ports to fail the same way. |
| */ |
| if (rc == -EBUSY) |
| msleep(1); |
| else |
| break; |
| } |
| } |
| } |
| |
| if (ap->flags & ATA_FLAG_SW_ACTIVITY) |
| ata_for_each_link(link, ap, EDGE) |
| ahci_init_sw_activity(link); |
| |
| } |
| |
| static int ahci_deinit_port(struct ata_port *ap, const char **emsg) |
| { |
| int rc; |
| |
| /* disable DMA */ |
| rc = ahci_stop_engine(ap); |
| if (rc) { |
| *emsg = "failed to stop engine"; |
| return rc; |
| } |
| |
| /* disable FIS reception */ |
| rc = ahci_stop_fis_rx(ap); |
| if (rc) { |
| *emsg = "failed stop FIS RX"; |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| int ahci_reset_controller(struct ata_host *host) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| u32 tmp; |
| |
| /* we must be in AHCI mode, before using anything |
| * AHCI-specific, such as HOST_RESET. |
| */ |
| ahci_enable_ahci(mmio); |
| |
| /* global controller reset */ |
| if (!ahci_skip_host_reset) { |
| tmp = readl(mmio + HOST_CTL); |
| if ((tmp & HOST_RESET) == 0) { |
| writel(tmp | HOST_RESET, mmio + HOST_CTL); |
| readl(mmio + HOST_CTL); /* flush */ |
| } |
| |
| /* |
| * to perform host reset, OS should set HOST_RESET |
| * and poll until this bit is read to be "0". |
| * reset must complete within 1 second, or |
| * the hardware should be considered fried. |
| */ |
| tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET, |
| HOST_RESET, 10, 1000); |
| |
| if (tmp & HOST_RESET) { |
| dev_err(host->dev, "controller reset failed (0x%x)\n", |
| tmp); |
| return -EIO; |
| } |
| |
| /* turn on AHCI mode */ |
| ahci_enable_ahci(mmio); |
| |
| /* Some registers might be cleared on reset. Restore |
| * initial values. |
| */ |
| ahci_restore_initial_config(host); |
| } else |
| dev_info(host->dev, "skipping global host reset\n"); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ahci_reset_controller); |
| |
| static void ahci_sw_activity(struct ata_link *link) |
| { |
| struct ata_port *ap = link->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; |
| |
| if (!(link->flags & ATA_LFLAG_SW_ACTIVITY)) |
| return; |
| |
| emp->activity++; |
| if (!timer_pending(&emp->timer)) |
| mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10)); |
| } |
| |
| static void ahci_sw_activity_blink(unsigned long arg) |
| { |
| struct ata_link *link = (struct ata_link *)arg; |
| struct ata_port *ap = link->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; |
| unsigned long led_message = emp->led_state; |
| u32 activity_led_state; |
| unsigned long flags; |
| |
| led_message &= EM_MSG_LED_VALUE; |
| led_message |= ap->port_no | (link->pmp << 8); |
| |
| /* check to see if we've had activity. If so, |
| * toggle state of LED and reset timer. If not, |
| * turn LED to desired idle state. |
| */ |
| spin_lock_irqsave(ap->lock, flags); |
| if (emp->saved_activity != emp->activity) { |
| emp->saved_activity = emp->activity; |
| /* get the current LED state */ |
| activity_led_state = led_message & EM_MSG_LED_VALUE_ON; |
| |
| if (activity_led_state) |
| activity_led_state = 0; |
| else |
| activity_led_state = 1; |
| |
| /* clear old state */ |
| led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; |
| |
| /* toggle state */ |
| led_message |= (activity_led_state << 16); |
| mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); |
| } else { |
| /* switch to idle */ |
| led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; |
| if (emp->blink_policy == BLINK_OFF) |
| led_message |= (1 << 16); |
| } |
| spin_unlock_irqrestore(ap->lock, flags); |
| ap->ops->transmit_led_message(ap, led_message, 4); |
| } |
| |
| static void ahci_init_sw_activity(struct ata_link *link) |
| { |
| struct ata_port *ap = link->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; |
| |
| /* init activity stats, setup timer */ |
| emp->saved_activity = emp->activity = 0; |
| setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link); |
| |
| /* check our blink policy and set flag for link if it's enabled */ |
| if (emp->blink_policy) |
| link->flags |= ATA_LFLAG_SW_ACTIVITY; |
| } |
| |
| int ahci_reset_em(struct ata_host *host) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| u32 em_ctl; |
| |
| em_ctl = readl(mmio + HOST_EM_CTL); |
| if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST)) |
| return -EINVAL; |
| |
| writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ahci_reset_em); |
| |
| static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, |
| ssize_t size) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| u32 em_ctl; |
| u32 message[] = {0, 0}; |
| unsigned long flags; |
| int pmp; |
| struct ahci_em_priv *emp; |
| |
| /* get the slot number from the message */ |
| pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; |
| if (pmp < EM_MAX_SLOTS) |
| emp = &pp->em_priv[pmp]; |
| else |
| return -EINVAL; |
| |
| spin_lock_irqsave(ap->lock, flags); |
| |
| /* |
| * if we are still busy transmitting a previous message, |
| * do not allow |
| */ |
| em_ctl = readl(mmio + HOST_EM_CTL); |
| if (em_ctl & EM_CTL_TM) { |
| spin_unlock_irqrestore(ap->lock, flags); |
| return -EBUSY; |
| } |
| |
| if (hpriv->em_msg_type & EM_MSG_TYPE_LED) { |
| /* |
| * create message header - this is all zero except for |
| * the message size, which is 4 bytes. |
| */ |
| message[0] |= (4 << 8); |
| |
| /* ignore 0:4 of byte zero, fill in port info yourself */ |
| message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); |
| |
| /* write message to EM_LOC */ |
| writel(message[0], mmio + hpriv->em_loc); |
| writel(message[1], mmio + hpriv->em_loc+4); |
| |
| /* |
| * tell hardware to transmit the message |
| */ |
| writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); |
| } |
| |
| /* save off new led state for port/slot */ |
| emp->led_state = state; |
| |
| spin_unlock_irqrestore(ap->lock, flags); |
| return size; |
| } |
| |
| static ssize_t ahci_led_show(struct ata_port *ap, char *buf) |
| { |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ata_link *link; |
| struct ahci_em_priv *emp; |
| int rc = 0; |
| |
| ata_for_each_link(link, ap, EDGE) { |
| emp = &pp->em_priv[link->pmp]; |
| rc += sprintf(buf, "%lx\n", emp->led_state); |
| } |
| return rc; |
| } |
| |
| static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, |
| size_t size) |
| { |
| unsigned int state; |
| int pmp; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_em_priv *emp; |
| |
| if (kstrtouint(buf, 0, &state) < 0) |
| return -EINVAL; |
| |
| /* get the slot number from the message */ |
| pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; |
| if (pmp < EM_MAX_SLOTS) |
| emp = &pp->em_priv[pmp]; |
| else |
| return -EINVAL; |
| |
| /* mask off the activity bits if we are in sw_activity |
| * mode, user should turn off sw_activity before setting |
| * activity led through em_message |
| */ |
| if (emp->blink_policy) |
| state &= ~EM_MSG_LED_VALUE_ACTIVITY; |
| |
| return ap->ops->transmit_led_message(ap, state, size); |
| } |
| |
| static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) |
| { |
| struct ata_link *link = dev->link; |
| struct ata_port *ap = link->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; |
| u32 port_led_state = emp->led_state; |
| |
| /* save the desired Activity LED behavior */ |
| if (val == OFF) { |
| /* clear LFLAG */ |
| link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); |
| |
| /* set the LED to OFF */ |
| port_led_state &= EM_MSG_LED_VALUE_OFF; |
| port_led_state |= (ap->port_no | (link->pmp << 8)); |
| ap->ops->transmit_led_message(ap, port_led_state, 4); |
| } else { |
| link->flags |= ATA_LFLAG_SW_ACTIVITY; |
| if (val == BLINK_OFF) { |
| /* set LED to ON for idle */ |
| port_led_state &= EM_MSG_LED_VALUE_OFF; |
| port_led_state |= (ap->port_no | (link->pmp << 8)); |
| port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ |
| ap->ops->transmit_led_message(ap, port_led_state, 4); |
| } |
| } |
| emp->blink_policy = val; |
| return 0; |
| } |
| |
| static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) |
| { |
| struct ata_link *link = dev->link; |
| struct ata_port *ap = link->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; |
| |
| /* display the saved value of activity behavior for this |
| * disk. |
| */ |
| return sprintf(buf, "%d\n", emp->blink_policy); |
| } |
| |
| static void ahci_port_init(struct device *dev, struct ata_port *ap, |
| int port_no, void __iomem *mmio, |
| void __iomem *port_mmio) |
| { |
| const char *emsg = NULL; |
| int rc; |
| u32 tmp; |
| |
| /* make sure port is not active */ |
| rc = ahci_deinit_port(ap, &emsg); |
| if (rc) |
| dev_warn(dev, "%s (%d)\n", emsg, rc); |
| |
| /* clear SError */ |
| tmp = readl(port_mmio + PORT_SCR_ERR); |
| VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); |
| writel(tmp, port_mmio + PORT_SCR_ERR); |
| |
| /* clear port IRQ */ |
| tmp = readl(port_mmio + PORT_IRQ_STAT); |
| VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); |
| if (tmp) |
| writel(tmp, port_mmio + PORT_IRQ_STAT); |
| |
| writel(1 << port_no, mmio + HOST_IRQ_STAT); |
| } |
| |
| void ahci_init_controller(struct ata_host *host) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| int i; |
| void __iomem *port_mmio; |
| u32 tmp; |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap = host->ports[i]; |
| |
| port_mmio = ahci_port_base(ap); |
| if (ata_port_is_dummy(ap)) |
| continue; |
| |
| ahci_port_init(host->dev, ap, i, mmio, port_mmio); |
| } |
| |
| tmp = readl(mmio + HOST_CTL); |
| VPRINTK("HOST_CTL 0x%x\n", tmp); |
| writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); |
| tmp = readl(mmio + HOST_CTL); |
| VPRINTK("HOST_CTL 0x%x\n", tmp); |
| } |
| EXPORT_SYMBOL_GPL(ahci_init_controller); |
| |
| static void ahci_dev_config(struct ata_device *dev) |
| { |
| struct ahci_host_priv *hpriv = dev->link->ap->host->private_data; |
| |
| if (hpriv->flags & AHCI_HFLAG_SECT255) { |
| dev->max_sectors = 255; |
| ata_dev_info(dev, |
| "SB600 AHCI: limiting to 255 sectors per cmd\n"); |
| } |
| } |
| |
| unsigned int ahci_dev_classify(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ata_taskfile tf; |
| u32 tmp; |
| |
| tmp = readl(port_mmio + PORT_SIG); |
| tf.lbah = (tmp >> 24) & 0xff; |
| tf.lbam = (tmp >> 16) & 0xff; |
| tf.lbal = (tmp >> 8) & 0xff; |
| tf.nsect = (tmp) & 0xff; |
| |
| return ata_dev_classify(&tf); |
| } |
| EXPORT_SYMBOL_GPL(ahci_dev_classify); |
| |
| void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, |
| u32 opts) |
| { |
| dma_addr_t cmd_tbl_dma; |
| |
| cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; |
| |
| pp->cmd_slot[tag].opts = cpu_to_le32(opts); |
| pp->cmd_slot[tag].status = 0; |
| pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); |
| pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); |
| } |
| EXPORT_SYMBOL_GPL(ahci_fill_cmd_slot); |
| |
| int ahci_kick_engine(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; |
| u32 tmp; |
| int busy, rc; |
| |
| /* stop engine */ |
| rc = ahci_stop_engine(ap); |
| if (rc) |
| goto out_restart; |
| |
| /* need to do CLO? |
| * always do CLO if PMP is attached (AHCI-1.3 9.2) |
| */ |
| busy = status & (ATA_BUSY | ATA_DRQ); |
| if (!busy && !sata_pmp_attached(ap)) { |
| rc = 0; |
| goto out_restart; |
| } |
| |
| if (!(hpriv->cap & HOST_CAP_CLO)) { |
| rc = -EOPNOTSUPP; |
| goto out_restart; |
| } |
| |
| /* perform CLO */ |
| tmp = readl(port_mmio + PORT_CMD); |
| tmp |= PORT_CMD_CLO; |
| writel(tmp, port_mmio + PORT_CMD); |
| |
| rc = 0; |
| tmp = ata_wait_register(ap, port_mmio + PORT_CMD, |
| PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); |
| if (tmp & PORT_CMD_CLO) |
| rc = -EIO; |
| |
| /* restart engine */ |
| out_restart: |
| hpriv->start_engine(ap); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(ahci_kick_engine); |
| |
| static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, |
| struct ata_taskfile *tf, int is_cmd, u16 flags, |
| unsigned long timeout_msec) |
| { |
| const u32 cmd_fis_len = 5; /* five dwords */ |
| struct ahci_port_priv *pp = ap->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u8 *fis = pp->cmd_tbl; |
| u32 tmp; |
| |
| /* prep the command */ |
| ata_tf_to_fis(tf, pmp, is_cmd, fis); |
| ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); |
| |
| /* issue & wait */ |
| writel(1, port_mmio + PORT_CMD_ISSUE); |
| |
| if (timeout_msec) { |
| tmp = ata_wait_register(ap, port_mmio + PORT_CMD_ISSUE, |
| 0x1, 0x1, 1, timeout_msec); |
| if (tmp & 0x1) { |
| ahci_kick_engine(ap); |
| return -EBUSY; |
| } |
| } else |
| readl(port_mmio + PORT_CMD_ISSUE); /* flush */ |
| |
| return 0; |
| } |
| |
| int ahci_do_softreset(struct ata_link *link, unsigned int *class, |
| int pmp, unsigned long deadline, |
| int (*check_ready)(struct ata_link *link)) |
| { |
| struct ata_port *ap = link->ap; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| const char *reason = NULL; |
| unsigned long now, msecs; |
| struct ata_taskfile tf; |
| bool fbs_disabled = false; |
| int rc; |
| |
| DPRINTK("ENTER\n"); |
| |
| /* prepare for SRST (AHCI-1.1 10.4.1) */ |
| rc = ahci_kick_engine(ap); |
| if (rc && rc != -EOPNOTSUPP) |
| ata_link_warn(link, "failed to reset engine (errno=%d)\n", rc); |
| |
| /* |
| * According to AHCI-1.2 9.3.9: if FBS is enable, software shall |
| * clear PxFBS.EN to '0' prior to issuing software reset to devices |
| * that is attached to port multiplier. |
| */ |
| if (!ata_is_host_link(link) && pp->fbs_enabled) { |
| ahci_disable_fbs(ap); |
| fbs_disabled = true; |
| } |
| |
| ata_tf_init(link->device, &tf); |
| |
| /* issue the first D2H Register FIS */ |
| msecs = 0; |
| now = jiffies; |
| if (time_after(deadline, now)) |
| msecs = jiffies_to_msecs(deadline - now); |
| |
| tf.ctl |= ATA_SRST; |
| if (ahci_exec_polled_cmd(ap, pmp, &tf, 0, |
| AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) { |
| rc = -EIO; |
| reason = "1st FIS failed"; |
| goto fail; |
| } |
| |
| /* spec says at least 5us, but be generous and sleep for 1ms */ |
| ata_msleep(ap, 1); |
| |
| /* issue the second D2H Register FIS */ |
| tf.ctl &= ~ATA_SRST; |
| ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); |
| |
| /* wait for link to become ready */ |
| rc = ata_wait_after_reset(link, deadline, check_ready); |
| if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) { |
| /* |
| * Workaround for cases where link online status can't |
| * be trusted. Treat device readiness timeout as link |
| * offline. |
| */ |
| ata_link_info(link, "device not ready, treating as offline\n"); |
| *class = ATA_DEV_NONE; |
| } else if (rc) { |
| /* link occupied, -ENODEV too is an error */ |
| reason = "device not ready"; |
| goto fail; |
| } else |
| *class = ahci_dev_classify(ap); |
| |
| /* re-enable FBS if disabled before */ |
| if (fbs_disabled) |
| ahci_enable_fbs(ap); |
| |
| DPRINTK("EXIT, class=%u\n", *class); |
| return 0; |
| |
| fail: |
| ata_link_err(link, "softreset failed (%s)\n", reason); |
| return rc; |
| } |
| |
| int ahci_check_ready(struct ata_link *link) |
| { |
| void __iomem *port_mmio = ahci_port_base(link->ap); |
| u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; |
| |
| return ata_check_ready(status); |
| } |
| EXPORT_SYMBOL_GPL(ahci_check_ready); |
| |
| static int ahci_softreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| int pmp = sata_srst_pmp(link); |
| |
| DPRINTK("ENTER\n"); |
| |
| return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); |
| } |
| EXPORT_SYMBOL_GPL(ahci_do_softreset); |
| |
| static int ahci_bad_pmp_check_ready(struct ata_link *link) |
| { |
| void __iomem *port_mmio = ahci_port_base(link->ap); |
| u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; |
| u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); |
| |
| /* |
| * There is no need to check TFDATA if BAD PMP is found due to HW bug, |
| * which can save timeout delay. |
| */ |
| if (irq_status & PORT_IRQ_BAD_PMP) |
| return -EIO; |
| |
| return ata_check_ready(status); |
| } |
| |
| static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| int pmp = sata_srst_pmp(link); |
| int rc; |
| u32 irq_sts; |
| |
| DPRINTK("ENTER\n"); |
| |
| rc = ahci_do_softreset(link, class, pmp, deadline, |
| ahci_bad_pmp_check_ready); |
| |
| /* |
| * Soft reset fails with IPMS set when PMP is enabled but |
| * SATA HDD/ODD is connected to SATA port, do soft reset |
| * again to port 0. |
| */ |
| if (rc == -EIO) { |
| irq_sts = readl(port_mmio + PORT_IRQ_STAT); |
| if (irq_sts & PORT_IRQ_BAD_PMP) { |
| ata_link_warn(link, |
| "applying PMP SRST workaround " |
| "and retrying\n"); |
| rc = ahci_do_softreset(link, class, 0, deadline, |
| ahci_check_ready); |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int ahci_hardreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); |
| struct ata_port *ap = link->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; |
| struct ata_taskfile tf; |
| bool online; |
| int rc; |
| |
| DPRINTK("ENTER\n"); |
| |
| ahci_stop_engine(ap); |
| |
| /* clear D2H reception area to properly wait for D2H FIS */ |
| ata_tf_init(link->device, &tf); |
| tf.command = ATA_BUSY; |
| ata_tf_to_fis(&tf, 0, 0, d2h_fis); |
| |
| rc = sata_link_hardreset(link, timing, deadline, &online, |
| ahci_check_ready); |
| |
| hpriv->start_engine(ap); |
| |
| if (online) |
| *class = ahci_dev_classify(ap); |
| |
| DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); |
| return rc; |
| } |
| |
| static void ahci_postreset(struct ata_link *link, unsigned int *class) |
| { |
| struct ata_port *ap = link->ap; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 new_tmp, tmp; |
| |
| ata_std_postreset(link, class); |
| |
| /* Make sure port's ATAPI bit is set appropriately */ |
| new_tmp = tmp = readl(port_mmio + PORT_CMD); |
| if (*class == ATA_DEV_ATAPI) |
| new_tmp |= PORT_CMD_ATAPI; |
| else |
| new_tmp &= ~PORT_CMD_ATAPI; |
| if (new_tmp != tmp) { |
| writel(new_tmp, port_mmio + PORT_CMD); |
| readl(port_mmio + PORT_CMD); /* flush */ |
| } |
| } |
| |
| static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) |
| { |
| struct scatterlist *sg; |
| struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; |
| unsigned int si; |
| |
| VPRINTK("ENTER\n"); |
| |
| /* |
| * Next, the S/G list. |
| */ |
| for_each_sg(qc->sg, sg, qc->n_elem, si) { |
| dma_addr_t addr = sg_dma_address(sg); |
| u32 sg_len = sg_dma_len(sg); |
| |
| ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff); |
| ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); |
| ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1); |
| } |
| |
| return si; |
| } |
| |
| static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| |
| if (!sata_pmp_attached(ap) || pp->fbs_enabled) |
| return ata_std_qc_defer(qc); |
| else |
| return sata_pmp_qc_defer_cmd_switch(qc); |
| } |
| |
| static void ahci_qc_prep(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| int is_atapi = ata_is_atapi(qc->tf.protocol); |
| void *cmd_tbl; |
| u32 opts; |
| const u32 cmd_fis_len = 5; /* five dwords */ |
| unsigned int n_elem; |
| |
| /* |
| * Fill in command table information. First, the header, |
| * a SATA Register - Host to Device command FIS. |
| */ |
| cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; |
| |
| ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); |
| if (is_atapi) { |
| memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); |
| memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); |
| } |
| |
| n_elem = 0; |
| if (qc->flags & ATA_QCFLAG_DMAMAP) |
| n_elem = ahci_fill_sg(qc, cmd_tbl); |
| |
| /* |
| * Fill in command slot information. |
| */ |
| opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12); |
| if (qc->tf.flags & ATA_TFLAG_WRITE) |
| opts |= AHCI_CMD_WRITE; |
| if (is_atapi) |
| opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; |
| |
| ahci_fill_cmd_slot(pp, qc->tag, opts); |
| } |
| |
| static void ahci_fbs_dec_intr(struct ata_port *ap) |
| { |
| struct ahci_port_priv *pp = ap->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 fbs = readl(port_mmio + PORT_FBS); |
| int retries = 3; |
| |
| DPRINTK("ENTER\n"); |
| BUG_ON(!pp->fbs_enabled); |
| |
| /* time to wait for DEC is not specified by AHCI spec, |
| * add a retry loop for safety. |
| */ |
| writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS); |
| fbs = readl(port_mmio + PORT_FBS); |
| while ((fbs & PORT_FBS_DEC) && retries--) { |
| udelay(1); |
| fbs = readl(port_mmio + PORT_FBS); |
| } |
| |
| if (fbs & PORT_FBS_DEC) |
| dev_err(ap->host->dev, "failed to clear device error\n"); |
| } |
| |
| static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ata_eh_info *host_ehi = &ap->link.eh_info; |
| struct ata_link *link = NULL; |
| struct ata_queued_cmd *active_qc; |
| struct ata_eh_info *active_ehi; |
| bool fbs_need_dec = false; |
| u32 serror; |
| |
| /* determine active link with error */ |
| if (pp->fbs_enabled) { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 fbs = readl(port_mmio + PORT_FBS); |
| int pmp = fbs >> PORT_FBS_DWE_OFFSET; |
| |
| if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links)) { |
| link = &ap->pmp_link[pmp]; |
| fbs_need_dec = true; |
| } |
| |
| } else |
| ata_for_each_link(link, ap, EDGE) |
| if (ata_link_active(link)) |
| break; |
| |
| if (!link) |
| link = &ap->link; |
| |
| active_qc = ata_qc_from_tag(ap, link->active_tag); |
| active_ehi = &link->eh_info; |
| |
| /* record irq stat */ |
| ata_ehi_clear_desc(host_ehi); |
| ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); |
| |
| /* AHCI needs SError cleared; otherwise, it might lock up */ |
| ahci_scr_read(&ap->link, SCR_ERROR, &serror); |
| ahci_scr_write(&ap->link, SCR_ERROR, serror); |
| host_ehi->serror |= serror; |
| |
| /* some controllers set IRQ_IF_ERR on device errors, ignore it */ |
| if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR) |
| irq_stat &= ~PORT_IRQ_IF_ERR; |
| |
| if (irq_stat & PORT_IRQ_TF_ERR) { |
| /* If qc is active, charge it; otherwise, the active |
| * link. There's no active qc on NCQ errors. It will |
| * be determined by EH by reading log page 10h. |
| */ |
| if (active_qc) |
| active_qc->err_mask |= AC_ERR_DEV; |
| else |
| active_ehi->err_mask |= AC_ERR_DEV; |
| |
| if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL) |
| host_ehi->serror &= ~SERR_INTERNAL; |
| } |
| |
| if (irq_stat & PORT_IRQ_UNK_FIS) { |
| u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); |
| |
| active_ehi->err_mask |= AC_ERR_HSM; |
| active_ehi->action |= ATA_EH_RESET; |
| ata_ehi_push_desc(active_ehi, |
| "unknown FIS %08x %08x %08x %08x" , |
| unk[0], unk[1], unk[2], unk[3]); |
| } |
| |
| if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) { |
| active_ehi->err_mask |= AC_ERR_HSM; |
| active_ehi->action |= ATA_EH_RESET; |
| ata_ehi_push_desc(active_ehi, "incorrect PMP"); |
| } |
| |
| if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { |
| host_ehi->err_mask |= AC_ERR_HOST_BUS; |
| host_ehi->action |= ATA_EH_RESET; |
| ata_ehi_push_desc(host_ehi, "host bus error"); |
| } |
| |
| if (irq_stat & PORT_IRQ_IF_ERR) { |
| if (fbs_need_dec) |
| active_ehi->err_mask |= AC_ERR_DEV; |
| else { |
| host_ehi->err_mask |= AC_ERR_ATA_BUS; |
| host_ehi->action |= ATA_EH_RESET; |
| } |
| |
| ata_ehi_push_desc(host_ehi, "interface fatal error"); |
| } |
| |
| if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { |
| ata_ehi_hotplugged(host_ehi); |
| ata_ehi_push_desc(host_ehi, "%s", |
| irq_stat & PORT_IRQ_CONNECT ? |
| "connection status changed" : "PHY RDY changed"); |
| } |
| |
| /* okay, let's hand over to EH */ |
| |
| if (irq_stat & PORT_IRQ_FREEZE) |
| ata_port_freeze(ap); |
| else if (fbs_need_dec) { |
| ata_link_abort(link); |
| ahci_fbs_dec_intr(ap); |
| } else |
| ata_port_abort(ap); |
| } |
| |
| static void ahci_handle_port_interrupt(struct ata_port *ap, |
| void __iomem *port_mmio, u32 status) |
| { |
| struct ata_eh_info *ehi = &ap->link.eh_info; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING); |
| u32 qc_active = 0; |
| int rc; |
| |
| /* ignore BAD_PMP while resetting */ |
| if (unlikely(resetting)) |
| status &= ~PORT_IRQ_BAD_PMP; |
| |
| /* if LPM is enabled, PHYRDY doesn't mean anything */ |
| if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) { |
| status &= ~PORT_IRQ_PHYRDY; |
| ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG); |
| } |
| |
| if (unlikely(status & PORT_IRQ_ERROR)) { |
| ahci_error_intr(ap, status); |
| return; |
| } |
| |
| if (status & PORT_IRQ_SDB_FIS) { |
| /* If SNotification is available, leave notification |
| * handling to sata_async_notification(). If not, |
| * emulate it by snooping SDB FIS RX area. |
| * |
| * Snooping FIS RX area is probably cheaper than |
| * poking SNotification but some constrollers which |
| * implement SNotification, ICH9 for example, don't |
| * store AN SDB FIS into receive area. |
| */ |
| if (hpriv->cap & HOST_CAP_SNTF) |
| sata_async_notification(ap); |
| else { |
| /* If the 'N' bit in word 0 of the FIS is set, |
| * we just received asynchronous notification. |
| * Tell libata about it. |
| * |
| * Lack of SNotification should not appear in |
| * ahci 1.2, so the workaround is unnecessary |
| * when FBS is enabled. |
| */ |
| if (pp->fbs_enabled) |
| WARN_ON_ONCE(1); |
| else { |
| const __le32 *f = pp->rx_fis + RX_FIS_SDB; |
| u32 f0 = le32_to_cpu(f[0]); |
| if (f0 & (1 << 15)) |
| sata_async_notification(ap); |
| } |
| } |
| } |
| |
| /* pp->active_link is not reliable once FBS is enabled, both |
| * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because |
| * NCQ and non-NCQ commands may be in flight at the same time. |
| */ |
| if (pp->fbs_enabled) { |
| if (ap->qc_active) { |
| qc_active = readl(port_mmio + PORT_SCR_ACT); |
| qc_active |= readl(port_mmio + PORT_CMD_ISSUE); |
| } |
| } else { |
| /* pp->active_link is valid iff any command is in flight */ |
| if (ap->qc_active && pp->active_link->sactive) |
| qc_active = readl(port_mmio + PORT_SCR_ACT); |
| else |
| qc_active = readl(port_mmio + PORT_CMD_ISSUE); |
| } |
| |
| |
| rc = ata_qc_complete_multiple(ap, qc_active); |
| |
| /* while resetting, invalid completions are expected */ |
| if (unlikely(rc < 0 && !resetting)) { |
| ehi->err_mask |= AC_ERR_HSM; |
| ehi->action |= ATA_EH_RESET; |
| ata_port_freeze(ap); |
| } |
| } |
| |
| static void ahci_port_intr(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 status; |
| |
| status = readl(port_mmio + PORT_IRQ_STAT); |
| writel(status, port_mmio + PORT_IRQ_STAT); |
| |
| ahci_handle_port_interrupt(ap, port_mmio, status); |
| } |
| |
| irqreturn_t ahci_thread_fn(int irq, void *dev_instance) |
| { |
| struct ata_port *ap = dev_instance; |
| struct ahci_port_priv *pp = ap->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| unsigned long flags; |
| u32 status; |
| |
| spin_lock_irqsave(&ap->host->lock, flags); |
| status = pp->intr_status; |
| if (status) |
| pp->intr_status = 0; |
| spin_unlock_irqrestore(&ap->host->lock, flags); |
| |
| spin_lock_bh(ap->lock); |
| ahci_handle_port_interrupt(ap, port_mmio, status); |
| spin_unlock_bh(ap->lock); |
| |
| return IRQ_HANDLED; |
| } |
| EXPORT_SYMBOL_GPL(ahci_thread_fn); |
| |
| static void ahci_hw_port_interrupt(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_port_priv *pp = ap->private_data; |
| u32 status; |
| |
| status = readl(port_mmio + PORT_IRQ_STAT); |
| writel(status, port_mmio + PORT_IRQ_STAT); |
| |
| pp->intr_status |= status; |
| } |
| |
| irqreturn_t ahci_hw_interrupt(int irq, void *dev_instance) |
| { |
| struct ata_port *ap_this = dev_instance; |
| struct ahci_port_priv *pp = ap_this->private_data; |
| struct ata_host *host = ap_this->host; |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| unsigned int i; |
| u32 irq_stat, irq_masked; |
| |
| VPRINTK("ENTER\n"); |
| |
| spin_lock(&host->lock); |
| |
| irq_stat = readl(mmio + HOST_IRQ_STAT); |
| |
| if (!irq_stat) { |
| u32 status = pp->intr_status; |
| |
| spin_unlock(&host->lock); |
| |
| VPRINTK("EXIT\n"); |
| |
| return status ? IRQ_WAKE_THREAD : IRQ_NONE; |
| } |
| |
| irq_masked = irq_stat & hpriv->port_map; |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap; |
| |
| if (!(irq_masked & (1 << i))) |
| continue; |
| |
| ap = host->ports[i]; |
| if (ap) { |
| ahci_hw_port_interrupt(ap); |
| VPRINTK("port %u\n", i); |
| } else { |
| VPRINTK("port %u (no irq)\n", i); |
| if (ata_ratelimit()) |
| dev_warn(host->dev, |
| "interrupt on disabled port %u\n", i); |
| } |
| } |
| |
| writel(irq_stat, mmio + HOST_IRQ_STAT); |
| |
| spin_unlock(&host->lock); |
| |
| VPRINTK("EXIT\n"); |
| |
| return IRQ_WAKE_THREAD; |
| } |
| EXPORT_SYMBOL_GPL(ahci_hw_interrupt); |
| |
| irqreturn_t ahci_interrupt(int irq, void *dev_instance) |
| { |
| struct ata_host *host = dev_instance; |
| struct ahci_host_priv *hpriv; |
| unsigned int i, handled = 0; |
| void __iomem *mmio; |
| u32 irq_stat, irq_masked; |
| |
| VPRINTK("ENTER\n"); |
| |
| hpriv = host->private_data; |
| mmio = hpriv->mmio; |
| |
| /* sigh. 0xffffffff is a valid return from h/w */ |
| irq_stat = readl(mmio + HOST_IRQ_STAT); |
| if (!irq_stat) |
| return IRQ_NONE; |
| |
| irq_masked = irq_stat & hpriv->port_map; |
| |
| spin_lock(&host->lock); |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap; |
| |
| if (!(irq_masked & (1 << i))) |
| continue; |
| |
| ap = host->ports[i]; |
| if (ap) { |
| ahci_port_intr(ap); |
| VPRINTK("port %u\n", i); |
| } else { |
| VPRINTK("port %u (no irq)\n", i); |
| if (ata_ratelimit()) |
| dev_warn(host->dev, |
| "interrupt on disabled port %u\n", i); |
| } |
| |
| handled = 1; |
| } |
| |
| /* HOST_IRQ_STAT behaves as level triggered latch meaning that |
| * it should be cleared after all the port events are cleared; |
| * otherwise, it will raise a spurious interrupt after each |
| * valid one. Please read section 10.6.2 of ahci 1.1 for more |
| * information. |
| * |
| * Also, use the unmasked value to clear interrupt as spurious |
| * pending event on a dummy port might cause screaming IRQ. |
| */ |
| writel(irq_stat, mmio + HOST_IRQ_STAT); |
| |
| spin_unlock(&host->lock); |
| |
| VPRINTK("EXIT\n"); |
| |
| return IRQ_RETVAL(handled); |
| } |
| EXPORT_SYMBOL_GPL(ahci_interrupt); |
| |
| static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_port_priv *pp = ap->private_data; |
| |
| /* Keep track of the currently active link. It will be used |
| * in completion path to determine whether NCQ phase is in |
| * progress. |
| */ |
| pp->active_link = qc->dev->link; |
| |
| if (qc->tf.protocol == ATA_PROT_NCQ) |
| writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); |
| |
| if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) { |
| u32 fbs = readl(port_mmio + PORT_FBS); |
| fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC); |
| fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; |
| writel(fbs, port_mmio + PORT_FBS); |
| pp->fbs_last_dev = qc->dev->link->pmp; |
| } |
| |
| writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); |
| |
| ahci_sw_activity(qc->dev->link); |
| |
| return 0; |
| } |
| |
| static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) |
| { |
| struct ahci_port_priv *pp = qc->ap->private_data; |
| u8 *rx_fis = pp->rx_fis; |
| |
| if (pp->fbs_enabled) |
| rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; |
| |
| /* |
| * After a successful execution of an ATA PIO data-in command, |
| * the device doesn't send D2H Reg FIS to update the TF and |
| * the host should take TF and E_Status from the preceding PIO |
| * Setup FIS. |
| */ |
| if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE && |
| !(qc->flags & ATA_QCFLAG_FAILED)) { |
| ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf); |
| qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15]; |
| } else |
| ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf); |
| |
| return true; |
| } |
| |
| static void ahci_freeze(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| |
| /* turn IRQ off */ |
| writel(0, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| static void ahci_thaw(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 tmp; |
| struct ahci_port_priv *pp = ap->private_data; |
| |
| /* clear IRQ */ |
| tmp = readl(port_mmio + PORT_IRQ_STAT); |
| writel(tmp, port_mmio + PORT_IRQ_STAT); |
| writel(1 << ap->port_no, mmio + HOST_IRQ_STAT); |
| |
| /* turn IRQ back on */ |
| writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| void ahci_error_handler(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| |
| if (!(ap->pflags & ATA_PFLAG_FROZEN)) { |
| /* restart engine */ |
| ahci_stop_engine(ap); |
| hpriv->start_engine(ap); |
| } |
| |
| sata_pmp_error_handler(ap); |
| |
| if (!ata_dev_enabled(ap->link.device)) |
| ahci_stop_engine(ap); |
| } |
| EXPORT_SYMBOL_GPL(ahci_error_handler); |
| |
| static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| |
| /* make DMA engine forget about the failed command */ |
| if (qc->flags & ATA_QCFLAG_FAILED) |
| ahci_kick_engine(ap); |
| } |
| |
| static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ata_device *dev = ap->link.device; |
| u32 devslp, dm, dito, mdat, deto; |
| int rc; |
| unsigned int err_mask; |
| |
| devslp = readl(port_mmio + PORT_DEVSLP); |
| if (!(devslp & PORT_DEVSLP_DSP)) { |
| dev_err(ap->host->dev, "port does not support device sleep\n"); |
| return; |
| } |
| |
| /* disable device sleep */ |
| if (!sleep) { |
| if (devslp & PORT_DEVSLP_ADSE) { |
| writel(devslp & ~PORT_DEVSLP_ADSE, |
| port_mmio + PORT_DEVSLP); |
| err_mask = ata_dev_set_feature(dev, |
| SETFEATURES_SATA_DISABLE, |
| SATA_DEVSLP); |
| if (err_mask && err_mask != AC_ERR_DEV) |
| ata_dev_warn(dev, "failed to disable DEVSLP\n"); |
| } |
| return; |
| } |
| |
| /* device sleep was already enabled */ |
| if (devslp & PORT_DEVSLP_ADSE) |
| return; |
| |
| /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */ |
| rc = ahci_stop_engine(ap); |
| if (rc) |
| return; |
| |
| dm = (devslp & PORT_DEVSLP_DM_MASK) >> PORT_DEVSLP_DM_OFFSET; |
| dito = devslp_idle_timeout / (dm + 1); |
| if (dito > 0x3ff) |
| dito = 0x3ff; |
| |
| /* Use the nominal value 10 ms if the read MDAT is zero, |
| * the nominal value of DETO is 20 ms. |
| */ |
| if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] & |
| ATA_LOG_DEVSLP_VALID_MASK) { |
| mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] & |
| ATA_LOG_DEVSLP_MDAT_MASK; |
| if (!mdat) |
| mdat = 10; |
| deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO]; |
| if (!deto) |
| deto = 20; |
| } else { |
| mdat = 10; |
| deto = 20; |
| } |
| |
| devslp |= ((dito << PORT_DEVSLP_DITO_OFFSET) | |
| (mdat << PORT_DEVSLP_MDAT_OFFSET) | |
| (deto << PORT_DEVSLP_DETO_OFFSET) | |
| PORT_DEVSLP_ADSE); |
| writel(devslp, port_mmio + PORT_DEVSLP); |
| |
| hpriv->start_engine(ap); |
| |
| /* enable device sleep feature for the drive */ |
| err_mask = ata_dev_set_feature(dev, |
| SETFEATURES_SATA_ENABLE, |
| SATA_DEVSLP); |
| if (err_mask && err_mask != AC_ERR_DEV) |
| ata_dev_warn(dev, "failed to enable DEVSLP\n"); |
| } |
| |
| static void ahci_enable_fbs(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 fbs; |
| int rc; |
| |
| if (!pp->fbs_supported) |
| return; |
| |
| fbs = readl(port_mmio + PORT_FBS); |
| if (fbs & PORT_FBS_EN) { |
| pp->fbs_enabled = true; |
| pp->fbs_last_dev = -1; /* initialization */ |
| return; |
| } |
| |
| rc = ahci_stop_engine(ap); |
| if (rc) |
| return; |
| |
| writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); |
| fbs = readl(port_mmio + PORT_FBS); |
| if (fbs & PORT_FBS_EN) { |
| dev_info(ap->host->dev, "FBS is enabled\n"); |
| pp->fbs_enabled = true; |
| pp->fbs_last_dev = -1; /* initialization */ |
| } else |
| dev_err(ap->host->dev, "Failed to enable FBS\n"); |
| |
| hpriv->start_engine(ap); |
| } |
| |
| static void ahci_disable_fbs(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 fbs; |
| int rc; |
| |
| if (!pp->fbs_supported) |
| return; |
| |
| fbs = readl(port_mmio + PORT_FBS); |
| if ((fbs & PORT_FBS_EN) == 0) { |
| pp->fbs_enabled = false; |
| return; |
| } |
| |
| rc = ahci_stop_engine(ap); |
| if (rc) |
| return; |
| |
| writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS); |
| fbs = readl(port_mmio + PORT_FBS); |
| if (fbs & PORT_FBS_EN) |
| dev_err(ap->host->dev, "Failed to disable FBS\n"); |
| else { |
| dev_info(ap->host->dev, "FBS is disabled\n"); |
| pp->fbs_enabled = false; |
| } |
| |
| hpriv->start_engine(ap); |
| } |
| |
| static void ahci_pmp_attach(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_port_priv *pp = ap->private_data; |
| u32 cmd; |
| |
| cmd = readl(port_mmio + PORT_CMD); |
| cmd |= PORT_CMD_PMP; |
| writel(cmd, port_mmio + PORT_CMD); |
| |
| ahci_enable_fbs(ap); |
| |
| pp->intr_mask |= PORT_IRQ_BAD_PMP; |
| |
| /* |
| * We must not change the port interrupt mask register if the |
| * port is marked frozen, the value in pp->intr_mask will be |
| * restored later when the port is thawed. |
| * |
| * Note that during initialization, the port is marked as |
| * frozen since the irq handler is not yet registered. |
| */ |
| if (!(ap->pflags & ATA_PFLAG_FROZEN)) |
| writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| static void ahci_pmp_detach(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_port_priv *pp = ap->private_data; |
| u32 cmd; |
| |
| ahci_disable_fbs(ap); |
| |
| cmd = readl(port_mmio + PORT_CMD); |
| cmd &= ~PORT_CMD_PMP; |
| writel(cmd, port_mmio + PORT_CMD); |
| |
| pp->intr_mask &= ~PORT_IRQ_BAD_PMP; |
| |
| /* see comment above in ahci_pmp_attach() */ |
| if (!(ap->pflags & ATA_PFLAG_FROZEN)) |
| writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| int ahci_port_resume(struct ata_port *ap) |
| { |
| ahci_power_up(ap); |
| ahci_start_port(ap); |
| |
| if (sata_pmp_attached(ap)) |
| ahci_pmp_attach(ap); |
| else |
| ahci_pmp_detach(ap); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ahci_port_resume); |
| |
| #ifdef CONFIG_PM |
| static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) |
| { |
| const char *emsg = NULL; |
| int rc; |
| |
| rc = ahci_deinit_port(ap, &emsg); |
| if (rc == 0) |
| ahci_power_down(ap); |
| else { |
| ata_port_err(ap, "%s (%d)\n", emsg, rc); |
| ata_port_freeze(ap); |
| } |
| |
| return rc; |
| } |
| #endif |
| |
| static int ahci_port_start(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct device *dev = ap->host->dev; |
| struct ahci_port_priv *pp; |
| void *mem; |
| dma_addr_t mem_dma; |
| size_t dma_sz, rx_fis_sz; |
| |
| pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); |
| if (!pp) |
| return -ENOMEM; |
| |
| if (ap->host->n_ports > 1) { |
| pp->irq_desc = devm_kzalloc(dev, 8, GFP_KERNEL); |
| if (!pp->irq_desc) { |
| devm_kfree(dev, pp); |
| return -ENOMEM; |
| } |
| snprintf(pp->irq_desc, 8, |
| "%s%d", dev_driver_string(dev), ap->port_no); |
| } |
| |
| /* check FBS capability */ |
| if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 cmd = readl(port_mmio + PORT_CMD); |
| if (cmd & PORT_CMD_FBSCP) |
| pp->fbs_supported = true; |
| else if (hpriv->flags & AHCI_HFLAG_YES_FBS) { |
| dev_info(dev, "port %d can do FBS, forcing FBSCP\n", |
| ap->port_no); |
| pp->fbs_supported = true; |
| } else |
| dev_warn(dev, "port %d is not capable of FBS\n", |
| ap->port_no); |
| } |
| |
| if (pp->fbs_supported) { |
| dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; |
| rx_fis_sz = AHCI_RX_FIS_SZ * 16; |
| } else { |
| dma_sz = AHCI_PORT_PRIV_DMA_SZ; |
| rx_fis_sz = AHCI_RX_FIS_SZ; |
| } |
| |
| mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); |
| if (!mem) |
| return -ENOMEM; |
| memset(mem, 0, dma_sz); |
| |
| /* |
| * First item in chunk of DMA memory: 32-slot command table, |
| * 32 bytes each in size |
| */ |
| pp->cmd_slot = mem; |
| pp->cmd_slot_dma = mem_dma; |
| |
| mem += AHCI_CMD_SLOT_SZ; |
| mem_dma += AHCI_CMD_SLOT_SZ; |
| |
| /* |
| * Second item: Received-FIS area |
| */ |
| pp->rx_fis = mem; |
| pp->rx_fis_dma = mem_dma; |
| |
| mem += rx_fis_sz; |
| mem_dma += rx_fis_sz; |
| |
| /* |
| * Third item: data area for storing a single command |
| * and its scatter-gather table |
| */ |
| pp->cmd_tbl = mem; |
| pp->cmd_tbl_dma = mem_dma; |
| |
| /* |
| * Save off initial list of interrupts to be enabled. |
| * This could be changed later |
| */ |
| pp->intr_mask = DEF_PORT_IRQ; |
| |
| /* |
| * Switch to per-port locking in case each port has its own MSI vector. |
| */ |
| if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) { |
| spin_lock_init(&pp->lock); |
| ap->lock = &pp->lock; |
| } |
| |
| ap->private_data = pp; |
| |
| /* engage engines, captain */ |
| return ahci_port_resume(ap); |
| } |
| |
| static void ahci_port_stop(struct ata_port *ap) |
| { |
| const char *emsg = NULL; |
| int rc; |
| |
| /* de-initialize port */ |
| rc = ahci_deinit_port(ap, &emsg); |
| if (rc) |
| ata_port_warn(ap, "%s (%d)\n", emsg, rc); |
| } |
| |
| void ahci_print_info(struct ata_host *host, const char *scc_s) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| u32 vers, cap, cap2, impl, speed; |
| const char *speed_s; |
| |
| vers = readl(mmio + HOST_VERSION); |
| cap = hpriv->cap; |
| cap2 = hpriv->cap2; |
| impl = hpriv->port_map; |
| |
| speed = (cap >> 20) & 0xf; |
| if (speed == 1) |
| speed_s = "1.5"; |
| else if (speed == 2) |
| speed_s = "3"; |
| else if (speed == 3) |
| speed_s = "6"; |
| else |
| speed_s = "?"; |
| |
| dev_info(host->dev, |
| "AHCI %02x%02x.%02x%02x " |
| "%u slots %u ports %s Gbps 0x%x impl %s mode\n" |
| , |
| |
| (vers >> 24) & 0xff, |
| (vers >> 16) & 0xff, |
| (vers >> 8) & 0xff, |
| vers & 0xff, |
| |
| ((cap >> 8) & 0x1f) + 1, |
| (cap & 0x1f) + 1, |
| speed_s, |
| impl, |
| scc_s); |
| |
| dev_info(host->dev, |
| "flags: " |
| "%s%s%s%s%s%s%s" |
| "%s%s%s%s%s%s%s" |
| "%s%s%s%s%s%s%s" |
| "%s%s\n" |
| , |
| |
| cap & HOST_CAP_64 ? "64bit " : "", |
| cap & HOST_CAP_NCQ ? "ncq " : "", |
| cap & HOST_CAP_SNTF ? "sntf " : "", |
| cap & HOST_CAP_MPS ? "ilck " : "", |
| cap & HOST_CAP_SSS ? "stag " : "", |
| cap & HOST_CAP_ALPM ? "pm " : "", |
| cap & HOST_CAP_LED ? "led " : "", |
| cap & HOST_CAP_CLO ? "clo " : "", |
| cap & HOST_CAP_ONLY ? "only " : "", |
| cap & HOST_CAP_PMP ? "pmp " : "", |
| cap & HOST_CAP_FBS ? "fbs " : "", |
| cap & HOST_CAP_PIO_MULTI ? "pio " : "", |
| cap & HOST_CAP_SSC ? "slum " : "", |
| cap & HOST_CAP_PART ? "part " : "", |
| cap & HOST_CAP_CCC ? "ccc " : "", |
| cap & HOST_CAP_EMS ? "ems " : "", |
| cap & HOST_CAP_SXS ? "sxs " : "", |
| cap2 & HOST_CAP2_DESO ? "deso " : "", |
| cap2 & HOST_CAP2_SADM ? "sadm " : "", |
| cap2 & HOST_CAP2_SDS ? "sds " : "", |
| cap2 & HOST_CAP2_APST ? "apst " : "", |
| cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "", |
| cap2 & HOST_CAP2_BOH ? "boh " : "" |
| ); |
| } |
| EXPORT_SYMBOL_GPL(ahci_print_info); |
| |
| void ahci_set_em_messages(struct ahci_host_priv *hpriv, |
| struct ata_port_info *pi) |
| { |
| u8 messages; |
| void __iomem *mmio = hpriv->mmio; |
| u32 em_loc = readl(mmio + HOST_EM_LOC); |
| u32 em_ctl = readl(mmio + HOST_EM_CTL); |
| |
| if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS)) |
| return; |
| |
| messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; |
| |
| if (messages) { |
| /* store em_loc */ |
| hpriv->em_loc = ((em_loc >> 16) * 4); |
| hpriv->em_buf_sz = ((em_loc & 0xff) * 4); |
| hpriv->em_msg_type = messages; |
| pi->flags |= ATA_FLAG_EM; |
| if (!(em_ctl & EM_CTL_ALHD)) |
| pi->flags |= ATA_FLAG_SW_ACTIVITY; |
| } |
| } |
| EXPORT_SYMBOL_GPL(ahci_set_em_messages); |
| |
| MODULE_AUTHOR("Jeff Garzik"); |
| MODULE_DESCRIPTION("Common AHCI SATA low-level routines"); |
| MODULE_LICENSE("GPL"); |