| /* |
| * character device driver for reading z/VM system service records |
| * |
| * |
| * Copyright IBM Corp. 2004, 2009 |
| * character device driver for reading z/VM system service records, |
| * Version 1.0 |
| * Author(s): Xenia Tkatschow <xenia@us.ibm.com> |
| * Stefan Weinhuber <wein@de.ibm.com> |
| * |
| */ |
| |
| #define KMSG_COMPONENT "vmlogrdr" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/atomic.h> |
| #include <asm/uaccess.h> |
| #include <asm/cpcmd.h> |
| #include <asm/debug.h> |
| #include <asm/ebcdic.h> |
| #include <net/iucv/iucv.h> |
| #include <linux/kmod.h> |
| #include <linux/cdev.h> |
| #include <linux/device.h> |
| #include <linux/string.h> |
| |
| MODULE_AUTHOR |
| ("(C) 2004 IBM Corporation by Xenia Tkatschow (xenia@us.ibm.com)\n" |
| " Stefan Weinhuber (wein@de.ibm.com)"); |
| MODULE_DESCRIPTION ("Character device driver for reading z/VM " |
| "system service records."); |
| MODULE_LICENSE("GPL"); |
| |
| |
| /* |
| * The size of the buffer for iucv data transfer is one page, |
| * but in addition to the data we read from iucv we also |
| * place an integer and some characters into that buffer, |
| * so the maximum size for record data is a little less then |
| * one page. |
| */ |
| #define NET_BUFFER_SIZE (PAGE_SIZE - sizeof(int) - sizeof(FENCE)) |
| |
| /* |
| * The elements that are concurrently accessed by bottom halves are |
| * connection_established, iucv_path_severed, local_interrupt_buffer |
| * and receive_ready. The first three can be protected by |
| * priv_lock. receive_ready is atomic, so it can be incremented and |
| * decremented without holding a lock. |
| * The variable dev_in_use needs to be protected by the lock, since |
| * it's a flag used by open to make sure that the device is opened only |
| * by one user at the same time. |
| */ |
| struct vmlogrdr_priv_t { |
| char system_service[8]; |
| char internal_name[8]; |
| char recording_name[8]; |
| struct iucv_path *path; |
| int connection_established; |
| int iucv_path_severed; |
| struct iucv_message local_interrupt_buffer; |
| atomic_t receive_ready; |
| int minor_num; |
| char * buffer; |
| char * current_position; |
| int remaining; |
| ulong residual_length; |
| int buffer_free; |
| int dev_in_use; /* 1: already opened, 0: not opened*/ |
| spinlock_t priv_lock; |
| struct device *device; |
| struct device *class_device; |
| int autorecording; |
| int autopurge; |
| }; |
| |
| |
| /* |
| * File operation structure for vmlogrdr devices |
| */ |
| static int vmlogrdr_open(struct inode *, struct file *); |
| static int vmlogrdr_release(struct inode *, struct file *); |
| static ssize_t vmlogrdr_read (struct file *filp, char __user *data, |
| size_t count, loff_t * ppos); |
| |
| static const struct file_operations vmlogrdr_fops = { |
| .owner = THIS_MODULE, |
| .open = vmlogrdr_open, |
| .release = vmlogrdr_release, |
| .read = vmlogrdr_read, |
| .llseek = no_llseek, |
| }; |
| |
| |
| static void vmlogrdr_iucv_path_complete(struct iucv_path *, u8 *ipuser); |
| static void vmlogrdr_iucv_path_severed(struct iucv_path *, u8 *ipuser); |
| static void vmlogrdr_iucv_message_pending(struct iucv_path *, |
| struct iucv_message *); |
| |
| |
| static struct iucv_handler vmlogrdr_iucv_handler = { |
| .path_complete = vmlogrdr_iucv_path_complete, |
| .path_severed = vmlogrdr_iucv_path_severed, |
| .message_pending = vmlogrdr_iucv_message_pending, |
| }; |
| |
| |
| static DECLARE_WAIT_QUEUE_HEAD(conn_wait_queue); |
| static DECLARE_WAIT_QUEUE_HEAD(read_wait_queue); |
| |
| /* |
| * pointer to system service private structure |
| * minor number 0 --> logrec |
| * minor number 1 --> account |
| * minor number 2 --> symptom |
| */ |
| |
| static struct vmlogrdr_priv_t sys_ser[] = { |
| { .system_service = "*LOGREC ", |
| .internal_name = "logrec", |
| .recording_name = "EREP", |
| .minor_num = 0, |
| .buffer_free = 1, |
| .priv_lock = __SPIN_LOCK_UNLOCKED(sys_ser[0].priv_lock), |
| .autorecording = 1, |
| .autopurge = 1, |
| }, |
| { .system_service = "*ACCOUNT", |
| .internal_name = "account", |
| .recording_name = "ACCOUNT", |
| .minor_num = 1, |
| .buffer_free = 1, |
| .priv_lock = __SPIN_LOCK_UNLOCKED(sys_ser[1].priv_lock), |
| .autorecording = 1, |
| .autopurge = 1, |
| }, |
| { .system_service = "*SYMPTOM", |
| .internal_name = "symptom", |
| .recording_name = "SYMPTOM", |
| .minor_num = 2, |
| .buffer_free = 1, |
| .priv_lock = __SPIN_LOCK_UNLOCKED(sys_ser[2].priv_lock), |
| .autorecording = 1, |
| .autopurge = 1, |
| } |
| }; |
| |
| #define MAXMINOR (sizeof(sys_ser)/sizeof(struct vmlogrdr_priv_t)) |
| |
| static char FENCE[] = {"EOR"}; |
| static int vmlogrdr_major = 0; |
| static struct cdev *vmlogrdr_cdev = NULL; |
| static int recording_class_AB; |
| |
| |
| static void vmlogrdr_iucv_path_complete(struct iucv_path *path, u8 *ipuser) |
| { |
| struct vmlogrdr_priv_t * logptr = path->private; |
| |
| spin_lock(&logptr->priv_lock); |
| logptr->connection_established = 1; |
| spin_unlock(&logptr->priv_lock); |
| wake_up(&conn_wait_queue); |
| } |
| |
| |
| static void vmlogrdr_iucv_path_severed(struct iucv_path *path, u8 *ipuser) |
| { |
| struct vmlogrdr_priv_t * logptr = path->private; |
| u8 reason = (u8) ipuser[8]; |
| |
| pr_err("vmlogrdr: connection severed with reason %i\n", reason); |
| |
| iucv_path_sever(path, NULL); |
| kfree(path); |
| logptr->path = NULL; |
| |
| spin_lock(&logptr->priv_lock); |
| logptr->connection_established = 0; |
| logptr->iucv_path_severed = 1; |
| spin_unlock(&logptr->priv_lock); |
| |
| wake_up(&conn_wait_queue); |
| /* just in case we're sleeping waiting for a record */ |
| wake_up_interruptible(&read_wait_queue); |
| } |
| |
| |
| static void vmlogrdr_iucv_message_pending(struct iucv_path *path, |
| struct iucv_message *msg) |
| { |
| struct vmlogrdr_priv_t * logptr = path->private; |
| |
| /* |
| * This function is the bottom half so it should be quick. |
| * Copy the external interrupt data into our local eib and increment |
| * the usage count |
| */ |
| spin_lock(&logptr->priv_lock); |
| memcpy(&logptr->local_interrupt_buffer, msg, sizeof(*msg)); |
| atomic_inc(&logptr->receive_ready); |
| spin_unlock(&logptr->priv_lock); |
| wake_up_interruptible(&read_wait_queue); |
| } |
| |
| |
| static int vmlogrdr_get_recording_class_AB(void) |
| { |
| static const char cp_command[] = "QUERY COMMAND RECORDING "; |
| char cp_response[80]; |
| char *tail; |
| int len,i; |
| |
| cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); |
| len = strnlen(cp_response,sizeof(cp_response)); |
| // now the parsing |
| tail=strnchr(cp_response,len,'='); |
| if (!tail) |
| return 0; |
| tail++; |
| if (!strncmp("ANY",tail,3)) |
| return 1; |
| if (!strncmp("NONE",tail,4)) |
| return 0; |
| /* |
| * expect comma separated list of classes here, if one of them |
| * is A or B return 1 otherwise 0 |
| */ |
| for (i=tail-cp_response; i<len; i++) |
| if ( cp_response[i]=='A' || cp_response[i]=='B' ) |
| return 1; |
| return 0; |
| } |
| |
| |
| static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr, |
| int action, int purge) |
| { |
| |
| char cp_command[80]; |
| char cp_response[160]; |
| char *onoff, *qid_string; |
| int rc; |
| |
| onoff = ((action == 1) ? "ON" : "OFF"); |
| qid_string = ((recording_class_AB == 1) ? " QID * " : ""); |
| |
| /* |
| * The recording commands needs to be called with option QID |
| * for guests that have previlege classes A or B. |
| * Purging has to be done as separate step, because recording |
| * can't be switched on as long as records are on the queue. |
| * Doing both at the same time doesn't work. |
| */ |
| if (purge && (action == 1)) { |
| memset(cp_command, 0x00, sizeof(cp_command)); |
| memset(cp_response, 0x00, sizeof(cp_response)); |
| snprintf(cp_command, sizeof(cp_command), |
| "RECORDING %s PURGE %s", |
| logptr->recording_name, |
| qid_string); |
| cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); |
| } |
| |
| memset(cp_command, 0x00, sizeof(cp_command)); |
| memset(cp_response, 0x00, sizeof(cp_response)); |
| snprintf(cp_command, sizeof(cp_command), "RECORDING %s %s %s", |
| logptr->recording_name, |
| onoff, |
| qid_string); |
| cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); |
| /* The recording command will usually answer with 'Command complete' |
| * on success, but when the specific service was never connected |
| * before then there might be an additional informational message |
| * 'HCPCRC8072I Recording entry not found' before the |
| * 'Command complete'. So I use strstr rather then the strncmp. |
| */ |
| if (strstr(cp_response,"Command complete")) |
| rc = 0; |
| else |
| rc = -EIO; |
| /* |
| * If we turn recording off, we have to purge any remaining records |
| * afterwards, as a large number of queued records may impact z/VM |
| * performance. |
| */ |
| if (purge && (action == 0)) { |
| memset(cp_command, 0x00, sizeof(cp_command)); |
| memset(cp_response, 0x00, sizeof(cp_response)); |
| snprintf(cp_command, sizeof(cp_command), |
| "RECORDING %s PURGE %s", |
| logptr->recording_name, |
| qid_string); |
| cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); |
| } |
| |
| return rc; |
| } |
| |
| |
| static int vmlogrdr_open (struct inode *inode, struct file *filp) |
| { |
| int dev_num = 0; |
| struct vmlogrdr_priv_t * logptr = NULL; |
| int connect_rc = 0; |
| int ret; |
| |
| dev_num = iminor(inode); |
| if (dev_num >= MAXMINOR) |
| return -ENODEV; |
| logptr = &sys_ser[dev_num]; |
| |
| /* |
| * only allow for blocking reads to be open |
| */ |
| if (filp->f_flags & O_NONBLOCK) |
| return -EOPNOTSUPP; |
| |
| /* Besure this device hasn't already been opened */ |
| spin_lock_bh(&logptr->priv_lock); |
| if (logptr->dev_in_use) { |
| spin_unlock_bh(&logptr->priv_lock); |
| return -EBUSY; |
| } |
| logptr->dev_in_use = 1; |
| logptr->connection_established = 0; |
| logptr->iucv_path_severed = 0; |
| atomic_set(&logptr->receive_ready, 0); |
| logptr->buffer_free = 1; |
| spin_unlock_bh(&logptr->priv_lock); |
| |
| /* set the file options */ |
| filp->private_data = logptr; |
| |
| /* start recording for this service*/ |
| if (logptr->autorecording) { |
| ret = vmlogrdr_recording(logptr,1,logptr->autopurge); |
| if (ret) |
| pr_warning("vmlogrdr: failed to start " |
| "recording automatically\n"); |
| } |
| |
| /* create connection to the system service */ |
| logptr->path = iucv_path_alloc(10, 0, GFP_KERNEL); |
| if (!logptr->path) |
| goto out_dev; |
| connect_rc = iucv_path_connect(logptr->path, &vmlogrdr_iucv_handler, |
| logptr->system_service, NULL, NULL, |
| logptr); |
| if (connect_rc) { |
| pr_err("vmlogrdr: iucv connection to %s " |
| "failed with rc %i \n", |
| logptr->system_service, connect_rc); |
| goto out_path; |
| } |
| |
| /* We've issued the connect and now we must wait for a |
| * ConnectionComplete or ConnectinSevered Interrupt |
| * before we can continue to process. |
| */ |
| wait_event(conn_wait_queue, (logptr->connection_established) |
| || (logptr->iucv_path_severed)); |
| if (logptr->iucv_path_severed) |
| goto out_record; |
| nonseekable_open(inode, filp); |
| return 0; |
| |
| out_record: |
| if (logptr->autorecording) |
| vmlogrdr_recording(logptr,0,logptr->autopurge); |
| out_path: |
| kfree(logptr->path); /* kfree(NULL) is ok. */ |
| logptr->path = NULL; |
| out_dev: |
| logptr->dev_in_use = 0; |
| return -EIO; |
| } |
| |
| |
| static int vmlogrdr_release (struct inode *inode, struct file *filp) |
| { |
| int ret; |
| |
| struct vmlogrdr_priv_t * logptr = filp->private_data; |
| |
| iucv_path_sever(logptr->path, NULL); |
| kfree(logptr->path); |
| logptr->path = NULL; |
| if (logptr->autorecording) { |
| ret = vmlogrdr_recording(logptr,0,logptr->autopurge); |
| if (ret) |
| pr_warning("vmlogrdr: failed to stop " |
| "recording automatically\n"); |
| } |
| logptr->dev_in_use = 0; |
| |
| return 0; |
| } |
| |
| |
| static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv) |
| { |
| int rc, *temp; |
| /* we need to keep track of two data sizes here: |
| * The number of bytes we need to receive from iucv and |
| * the total number of bytes we actually write into the buffer. |
| */ |
| int user_data_count, iucv_data_count; |
| char * buffer; |
| |
| if (atomic_read(&priv->receive_ready)) { |
| spin_lock_bh(&priv->priv_lock); |
| if (priv->residual_length){ |
| /* receive second half of a record */ |
| iucv_data_count = priv->residual_length; |
| user_data_count = 0; |
| buffer = priv->buffer; |
| } else { |
| /* receive a new record: |
| * We need to return the total length of the record |
| * + size of FENCE in the first 4 bytes of the buffer. |
| */ |
| iucv_data_count = priv->local_interrupt_buffer.length; |
| user_data_count = sizeof(int); |
| temp = (int*)priv->buffer; |
| *temp= iucv_data_count + sizeof(FENCE); |
| buffer = priv->buffer + sizeof(int); |
| } |
| /* |
| * If the record is bigger than our buffer, we receive only |
| * a part of it. We can get the rest later. |
| */ |
| if (iucv_data_count > NET_BUFFER_SIZE) |
| iucv_data_count = NET_BUFFER_SIZE; |
| rc = iucv_message_receive(priv->path, |
| &priv->local_interrupt_buffer, |
| 0, buffer, iucv_data_count, |
| &priv->residual_length); |
| spin_unlock_bh(&priv->priv_lock); |
| /* An rc of 5 indicates that the record was bigger than |
| * the buffer, which is OK for us. A 9 indicates that the |
| * record was purged befor we could receive it. |
| */ |
| if (rc == 5) |
| rc = 0; |
| if (rc == 9) |
| atomic_set(&priv->receive_ready, 0); |
| } else { |
| rc = 1; |
| } |
| if (!rc) { |
| priv->buffer_free = 0; |
| user_data_count += iucv_data_count; |
| priv->current_position = priv->buffer; |
| if (priv->residual_length == 0){ |
| /* the whole record has been captured, |
| * now add the fence */ |
| atomic_dec(&priv->receive_ready); |
| buffer = priv->buffer + user_data_count; |
| memcpy(buffer, FENCE, sizeof(FENCE)); |
| user_data_count += sizeof(FENCE); |
| } |
| priv->remaining = user_data_count; |
| } |
| |
| return rc; |
| } |
| |
| |
| static ssize_t vmlogrdr_read(struct file *filp, char __user *data, |
| size_t count, loff_t * ppos) |
| { |
| int rc; |
| struct vmlogrdr_priv_t * priv = filp->private_data; |
| |
| while (priv->buffer_free) { |
| rc = vmlogrdr_receive_data(priv); |
| if (rc) { |
| rc = wait_event_interruptible(read_wait_queue, |
| atomic_read(&priv->receive_ready)); |
| if (rc) |
| return rc; |
| } |
| } |
| /* copy only up to end of record */ |
| if (count > priv->remaining) |
| count = priv->remaining; |
| |
| if (copy_to_user(data, priv->current_position, count)) |
| return -EFAULT; |
| |
| *ppos += count; |
| priv->current_position += count; |
| priv->remaining -= count; |
| |
| /* if all data has been transferred, set buffer free */ |
| if (priv->remaining == 0) |
| priv->buffer_free = 1; |
| |
| return count; |
| } |
| |
| static ssize_t vmlogrdr_autopurge_store(struct device * dev, |
| struct device_attribute *attr, |
| const char * buf, size_t count) |
| { |
| struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); |
| ssize_t ret = count; |
| |
| switch (buf[0]) { |
| case '0': |
| priv->autopurge=0; |
| break; |
| case '1': |
| priv->autopurge=1; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| return ret; |
| } |
| |
| |
| static ssize_t vmlogrdr_autopurge_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); |
| return sprintf(buf, "%u\n", priv->autopurge); |
| } |
| |
| |
| static DEVICE_ATTR(autopurge, 0644, vmlogrdr_autopurge_show, |
| vmlogrdr_autopurge_store); |
| |
| |
| static ssize_t vmlogrdr_purge_store(struct device * dev, |
| struct device_attribute *attr, |
| const char * buf, size_t count) |
| { |
| |
| char cp_command[80]; |
| char cp_response[80]; |
| struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); |
| |
| if (buf[0] != '1') |
| return -EINVAL; |
| |
| memset(cp_command, 0x00, sizeof(cp_command)); |
| memset(cp_response, 0x00, sizeof(cp_response)); |
| |
| /* |
| * The recording command needs to be called with option QID |
| * for guests that have previlege classes A or B. |
| * Other guests will not recognize the command and we have to |
| * issue the same command without the QID parameter. |
| */ |
| |
| if (recording_class_AB) |
| snprintf(cp_command, sizeof(cp_command), |
| "RECORDING %s PURGE QID * ", |
| priv->recording_name); |
| else |
| snprintf(cp_command, sizeof(cp_command), |
| "RECORDING %s PURGE ", |
| priv->recording_name); |
| |
| cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); |
| |
| return count; |
| } |
| |
| |
| static DEVICE_ATTR(purge, 0200, NULL, vmlogrdr_purge_store); |
| |
| |
| static ssize_t vmlogrdr_autorecording_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); |
| ssize_t ret = count; |
| |
| switch (buf[0]) { |
| case '0': |
| priv->autorecording=0; |
| break; |
| case '1': |
| priv->autorecording=1; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| return ret; |
| } |
| |
| |
| static ssize_t vmlogrdr_autorecording_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); |
| return sprintf(buf, "%u\n", priv->autorecording); |
| } |
| |
| |
| static DEVICE_ATTR(autorecording, 0644, vmlogrdr_autorecording_show, |
| vmlogrdr_autorecording_store); |
| |
| |
| static ssize_t vmlogrdr_recording_store(struct device * dev, |
| struct device_attribute *attr, |
| const char * buf, size_t count) |
| { |
| struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); |
| ssize_t ret; |
| |
| switch (buf[0]) { |
| case '0': |
| ret = vmlogrdr_recording(priv,0,0); |
| break; |
| case '1': |
| ret = vmlogrdr_recording(priv,1,0); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| if (ret) |
| return ret; |
| else |
| return count; |
| |
| } |
| |
| |
| static DEVICE_ATTR(recording, 0200, NULL, vmlogrdr_recording_store); |
| |
| |
| static ssize_t vmlogrdr_recording_status_show(struct device_driver *driver, |
| char *buf) |
| { |
| |
| static const char cp_command[] = "QUERY RECORDING "; |
| int len; |
| |
| cpcmd(cp_command, buf, 4096, NULL); |
| len = strlen(buf); |
| return len; |
| } |
| static DRIVER_ATTR(recording_status, 0444, vmlogrdr_recording_status_show, |
| NULL); |
| static struct attribute *vmlogrdr_drv_attrs[] = { |
| &driver_attr_recording_status.attr, |
| NULL, |
| }; |
| static struct attribute_group vmlogrdr_drv_attr_group = { |
| .attrs = vmlogrdr_drv_attrs, |
| }; |
| static const struct attribute_group *vmlogrdr_drv_attr_groups[] = { |
| &vmlogrdr_drv_attr_group, |
| NULL, |
| }; |
| |
| static struct attribute *vmlogrdr_attrs[] = { |
| &dev_attr_autopurge.attr, |
| &dev_attr_purge.attr, |
| &dev_attr_autorecording.attr, |
| &dev_attr_recording.attr, |
| NULL, |
| }; |
| static struct attribute_group vmlogrdr_attr_group = { |
| .attrs = vmlogrdr_attrs, |
| }; |
| static const struct attribute_group *vmlogrdr_attr_groups[] = { |
| &vmlogrdr_attr_group, |
| NULL, |
| }; |
| |
| static int vmlogrdr_pm_prepare(struct device *dev) |
| { |
| int rc; |
| struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); |
| |
| rc = 0; |
| if (priv) { |
| spin_lock_bh(&priv->priv_lock); |
| if (priv->dev_in_use) |
| rc = -EBUSY; |
| spin_unlock_bh(&priv->priv_lock); |
| } |
| if (rc) |
| pr_err("vmlogrdr: device %s is busy. Refuse to suspend.\n", |
| dev_name(dev)); |
| return rc; |
| } |
| |
| |
| static const struct dev_pm_ops vmlogrdr_pm_ops = { |
| .prepare = vmlogrdr_pm_prepare, |
| }; |
| |
| static struct class *vmlogrdr_class; |
| static struct device_driver vmlogrdr_driver = { |
| .name = "vmlogrdr", |
| .bus = &iucv_bus, |
| .pm = &vmlogrdr_pm_ops, |
| .groups = vmlogrdr_drv_attr_groups, |
| }; |
| |
| static int vmlogrdr_register_driver(void) |
| { |
| int ret; |
| |
| /* Register with iucv driver */ |
| ret = iucv_register(&vmlogrdr_iucv_handler, 1); |
| if (ret) |
| goto out; |
| |
| ret = driver_register(&vmlogrdr_driver); |
| if (ret) |
| goto out_iucv; |
| |
| vmlogrdr_class = class_create(THIS_MODULE, "vmlogrdr"); |
| if (IS_ERR(vmlogrdr_class)) { |
| ret = PTR_ERR(vmlogrdr_class); |
| vmlogrdr_class = NULL; |
| goto out_driver; |
| } |
| return 0; |
| |
| out_driver: |
| driver_unregister(&vmlogrdr_driver); |
| out_iucv: |
| iucv_unregister(&vmlogrdr_iucv_handler, 1); |
| out: |
| return ret; |
| } |
| |
| |
| static void vmlogrdr_unregister_driver(void) |
| { |
| class_destroy(vmlogrdr_class); |
| vmlogrdr_class = NULL; |
| driver_unregister(&vmlogrdr_driver); |
| iucv_unregister(&vmlogrdr_iucv_handler, 1); |
| } |
| |
| |
| static int vmlogrdr_register_device(struct vmlogrdr_priv_t *priv) |
| { |
| struct device *dev; |
| int ret; |
| |
| dev = kzalloc(sizeof(struct device), GFP_KERNEL); |
| if (dev) { |
| dev_set_name(dev, "%s", priv->internal_name); |
| dev->bus = &iucv_bus; |
| dev->parent = iucv_root; |
| dev->driver = &vmlogrdr_driver; |
| dev->groups = vmlogrdr_attr_groups; |
| dev_set_drvdata(dev, priv); |
| /* |
| * The release function could be called after the |
| * module has been unloaded. It's _only_ task is to |
| * free the struct. Therefore, we specify kfree() |
| * directly here. (Probably a little bit obfuscating |
| * but legitime ...). |
| */ |
| dev->release = (void (*)(struct device *))kfree; |
| } else |
| return -ENOMEM; |
| ret = device_register(dev); |
| if (ret) { |
| put_device(dev); |
| return ret; |
| } |
| |
| priv->class_device = device_create(vmlogrdr_class, dev, |
| MKDEV(vmlogrdr_major, |
| priv->minor_num), |
| priv, "%s", dev_name(dev)); |
| if (IS_ERR(priv->class_device)) { |
| ret = PTR_ERR(priv->class_device); |
| priv->class_device=NULL; |
| device_unregister(dev); |
| return ret; |
| } |
| priv->device = dev; |
| return 0; |
| } |
| |
| |
| static int vmlogrdr_unregister_device(struct vmlogrdr_priv_t *priv) |
| { |
| device_destroy(vmlogrdr_class, MKDEV(vmlogrdr_major, priv->minor_num)); |
| if (priv->device != NULL) { |
| device_unregister(priv->device); |
| priv->device=NULL; |
| } |
| return 0; |
| } |
| |
| |
| static int vmlogrdr_register_cdev(dev_t dev) |
| { |
| int rc = 0; |
| vmlogrdr_cdev = cdev_alloc(); |
| if (!vmlogrdr_cdev) { |
| return -ENOMEM; |
| } |
| vmlogrdr_cdev->owner = THIS_MODULE; |
| vmlogrdr_cdev->ops = &vmlogrdr_fops; |
| vmlogrdr_cdev->dev = dev; |
| rc = cdev_add(vmlogrdr_cdev, vmlogrdr_cdev->dev, MAXMINOR); |
| if (!rc) |
| return 0; |
| |
| // cleanup: cdev is not fully registered, no cdev_del here! |
| kobject_put(&vmlogrdr_cdev->kobj); |
| vmlogrdr_cdev=NULL; |
| return rc; |
| } |
| |
| |
| static void vmlogrdr_cleanup(void) |
| { |
| int i; |
| |
| if (vmlogrdr_cdev) { |
| cdev_del(vmlogrdr_cdev); |
| vmlogrdr_cdev=NULL; |
| } |
| for (i=0; i < MAXMINOR; ++i ) { |
| vmlogrdr_unregister_device(&sys_ser[i]); |
| free_page((unsigned long)sys_ser[i].buffer); |
| } |
| vmlogrdr_unregister_driver(); |
| if (vmlogrdr_major) { |
| unregister_chrdev_region(MKDEV(vmlogrdr_major, 0), MAXMINOR); |
| vmlogrdr_major=0; |
| } |
| } |
| |
| |
| static int __init vmlogrdr_init(void) |
| { |
| int rc; |
| int i; |
| dev_t dev; |
| |
| if (! MACHINE_IS_VM) { |
| pr_err("not running under VM, driver not loaded.\n"); |
| return -ENODEV; |
| } |
| |
| recording_class_AB = vmlogrdr_get_recording_class_AB(); |
| |
| rc = alloc_chrdev_region(&dev, 0, MAXMINOR, "vmlogrdr"); |
| if (rc) |
| return rc; |
| vmlogrdr_major = MAJOR(dev); |
| |
| rc=vmlogrdr_register_driver(); |
| if (rc) |
| goto cleanup; |
| |
| for (i=0; i < MAXMINOR; ++i ) { |
| sys_ser[i].buffer = (char *) get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!sys_ser[i].buffer) { |
| rc = -ENOMEM; |
| break; |
| } |
| sys_ser[i].current_position = sys_ser[i].buffer; |
| rc=vmlogrdr_register_device(&sys_ser[i]); |
| if (rc) |
| break; |
| } |
| if (rc) |
| goto cleanup; |
| |
| rc = vmlogrdr_register_cdev(dev); |
| if (rc) |
| goto cleanup; |
| return 0; |
| |
| cleanup: |
| vmlogrdr_cleanup(); |
| return rc; |
| } |
| |
| |
| static void __exit vmlogrdr_exit(void) |
| { |
| vmlogrdr_cleanup(); |
| return; |
| } |
| |
| |
| module_init(vmlogrdr_init); |
| module_exit(vmlogrdr_exit); |