| /* |
| * SAMSUNG NFC Controller |
| * |
| * Copyright (C) 2013 Samsung Electronics Co.Ltd |
| * Author: Woonki Lee <woonki84.lee@samsung.com> |
| * Heejae Kim <heejae12.kim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Last update: 2014-07-15 |
| * |
| */ |
| #define pr_fmt(fmt) "[sec_nfc] %s: " fmt, __func__ |
| |
| #ifdef CONFIG_SEC_NFC_IF_I2C_GPIO |
| #define CONFIG_SEC_NFC_IF_I2C |
| #endif |
| |
| #include <linux/wait.h> |
| #include <linux/delay.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/mutex.h> |
| #include <linux/module.h> |
| #include <linux/miscdevice.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| #include <linux/fs.h> |
| #include <asm/uaccess.h> |
| #include "sec_nfc.h" |
| #include "./nfc_logger/nfc_logger.h" |
| |
| #ifdef CONFIG_SEC_NFC_CLK_REQ |
| #include <linux/interrupt.h> |
| #endif |
| #include <linux/wakelock.h> |
| #include <linux/of_gpio.h> |
| #include <linux/clk.h> |
| |
| #ifdef CONFIG_SEC_NFC_LDO_CONTROL |
| #include <linux/regulator/consumer.h> |
| #endif |
| |
| |
| #ifndef CONFIG_SEC_NFC_IF_I2C |
| struct sec_nfc_i2c_info {}; |
| #define sec_nfc_read NULL |
| #define sec_nfc_write NULL |
| #define sec_nfc_poll NULL |
| #define sec_nfc_i2c_irq_clear(x) |
| |
| #define SEC_NFC_GET_INFO(dev) platform_get_drvdata(to_platform_device(dev)) |
| |
| #else /* CONFIG_SEC_NFC_IF_I2C */ |
| #include <linux/interrupt.h> |
| #include <linux/poll.h> |
| #include <linux/sched.h> |
| #include <linux/i2c.h> |
| #ifdef CONFIG_ESE_SECURE |
| #include <linux/smc.h> |
| #endif |
| |
| #define SEC_NFC_GET_INFO(dev) i2c_get_clientdata(to_i2c_client(dev)) |
| enum sec_nfc_irq { |
| SEC_NFC_SKIP = -1, |
| SEC_NFC_NONE, |
| SEC_NFC_INT, |
| SEC_NFC_READ_TIMES, |
| }; |
| |
| struct sec_nfc_i2c_info { |
| struct i2c_client *i2c_dev; |
| struct mutex read_mutex; |
| enum sec_nfc_irq read_irq; |
| wait_queue_head_t read_wait; |
| size_t buflen; |
| u8 *buf; |
| }; |
| |
| #endif |
| |
| struct sec_nfc_info { |
| struct miscdevice miscdev; |
| struct mutex mutex; |
| enum sec_nfc_mode mode; |
| struct device *dev; |
| struct sec_nfc_platform_data *pdata; |
| struct sec_nfc_i2c_info i2c_info; |
| struct wake_lock nfc_wake_lock; |
| #ifdef CONFIG_SEC_NFC_CLK_REQ |
| bool clk_ctl; |
| bool clk_state; |
| #endif |
| void __iomem *clkctrl; |
| int clk_irq; |
| }; |
| |
| #define FEATURE_SEC_NFC_TEST |
| #ifdef FEATURE_SEC_NFC_TEST |
| static struct sec_nfc_info *g_nfc_info; |
| static bool on_nfc_test; |
| static bool nfc_int_wait; |
| #endif |
| extern unsigned int lpcharge; |
| #ifdef CONFIG_SEC_NFC_IF_I2C |
| static irqreturn_t sec_nfc_irq_thread_fn(int irq, void *dev_id) |
| { |
| struct sec_nfc_info *info = dev_id; |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| |
| NFC_LOG_REC("irq\n"); |
| |
| #ifdef FEATURE_SEC_NFC_TEST |
| if (on_nfc_test) { |
| nfc_int_wait = true; |
| NFC_LOG_INFO("NFC_TEST: interrupt is raised\n"); |
| wake_up_interruptible(&info->i2c_info.read_wait); |
| return IRQ_HANDLED; |
| } |
| #endif |
| |
| if (gpio_get_value(pdata->irq) == 0) { |
| NFC_LOG_REC("irq-gpio state is low!\n"); |
| return IRQ_HANDLED; |
| } |
| mutex_lock(&info->i2c_info.read_mutex); |
| /* Skip interrupt during power switching |
| * It is released after first write */ |
| if (info->i2c_info.read_irq == SEC_NFC_SKIP) { |
| NFC_LOG_REC("Now power swiching. Skip this IRQ\n"); |
| mutex_unlock(&info->i2c_info.read_mutex); |
| return IRQ_HANDLED; |
| } |
| |
| info->i2c_info.read_irq += SEC_NFC_READ_TIMES; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| |
| wake_up_interruptible(&info->i2c_info.read_wait); |
| wake_lock_timeout(&info->nfc_wake_lock, 2*HZ); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t sec_nfc_clk_irq(int irq, void *dev_id) |
| { |
| struct sec_nfc_info *info = dev_id; |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| struct device_node *np = info->dev->of_node; |
| struct property *prop; |
| |
| prop = of_find_property(np, "sec-nfc,manual_clkctrl", NULL); |
| if (prop) { |
| unsigned int val = readl(info->clkctrl); |
| if (gpio_get_value(pdata->clk_irq)) |
| val &= ~SEC_NFC_CLKCTRL_REQ_POLA; |
| else |
| val |= SEC_NFC_CLKCTRL_REQ_POLA; |
| writel(val, info->clkctrl); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static int nfc_state_print(struct sec_nfc_info *info) |
| { |
| int en = gpio_get_value(info->pdata->ven); |
| int firm = gpio_get_value(info->pdata->firm); |
| int irq = gpio_get_value(info->pdata->irq); |
| int pvdd = 0; |
| |
| #ifdef CONFIG_SEC_NFC_LDO_CONTROL |
| struct regulator *regulator_nfc_pvdd; |
| |
| regulator_nfc_pvdd = regulator_get(NULL, info->pdata->i2c_1p8); |
| if (IS_ERR(regulator_nfc_pvdd) || regulator_nfc_pvdd == NULL) { |
| NFC_LOG_ERR("%s - nfc_pvdd regulator_get fail\n", __func__); |
| return -ENODEV; |
| } |
| pvdd = regulator_is_enabled(regulator_nfc_pvdd); |
| regulator_put(regulator_nfc_pvdd); |
| #else |
| pvdd = gpio_get_value(info->pdata->pvdd_en); |
| #endif |
| |
| NFC_LOG_INFO("%s en: %d, firm: %d power: %d irq: %d\n", __func__, en, firm, pvdd, irq); |
| NFC_LOG_INFO("%s mode %d\n",__func__ , info->mode); |
| |
| return 0; |
| } |
| |
| static ssize_t sec_nfc_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct sec_nfc_info *info = container_of(file->private_data, |
| struct sec_nfc_info, miscdev); |
| enum sec_nfc_irq irq; |
| int ret = 0; |
| |
| #ifdef FEATURE_SEC_NFC_TEST |
| if (on_nfc_test) |
| return 0; |
| #endif |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->mode == SEC_NFC_MODE_OFF) { |
| NFC_LOG_ERR("read() nfc is not enabled\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| mutex_lock(&info->i2c_info.read_mutex); |
| if (count == 0) { |
| if (info->i2c_info.read_irq >= SEC_NFC_INT) |
| info->i2c_info.read_irq--; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| goto out; |
| } |
| |
| irq = info->i2c_info.read_irq; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| if (irq == SEC_NFC_NONE) { |
| if (file->f_flags & O_NONBLOCK) { |
| NFC_LOG_ERR("read() it is nonblock\n"); |
| ret = -EAGAIN; |
| goto out; |
| } |
| } |
| |
| /* i2c recv */ |
| if (count > info->i2c_info.buflen) |
| count = info->i2c_info.buflen; |
| |
| if (count > SEC_NFC_MSG_MAX_SIZE) { |
| NFC_LOG_ERR("read() user required wrong size :%d\n", (u32)count); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| NFC_LOG_REC("read(%zu)\n", count); |
| mutex_lock(&info->i2c_info.read_mutex); |
| memset(info->i2c_info.buf, 0, count); |
| ret = i2c_master_recv(info->i2c_info.i2c_dev, info->i2c_info.buf, (u32)count); |
| |
| if (ret == -EREMOTEIO) { |
| ret = -ERESTART; |
| goto read_error; |
| } else if (ret != count) { |
| NFC_LOG_ERR("read failed: return: %d count: %d\n", |
| ret, (u32)count); |
| /*ret = -EREMOTEIO;*/ |
| goto read_error; |
| } |
| |
| if (info->i2c_info.read_irq >= SEC_NFC_INT) |
| info->i2c_info.read_irq--; |
| |
| if (info->i2c_info.read_irq == SEC_NFC_READ_TIMES) |
| wake_up_interruptible(&info->i2c_info.read_wait); |
| |
| mutex_unlock(&info->i2c_info.read_mutex); |
| |
| if (copy_to_user(buf, info->i2c_info.buf, ret)) { |
| NFC_LOG_ERR("read() copy failed to user\n"); |
| ret = -EFAULT; |
| } |
| |
| goto out; |
| |
| read_error: |
| NFC_LOG_ERR("read error %d\n", ret); |
| nfc_state_print(info); |
| info->i2c_info.read_irq = SEC_NFC_NONE; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return ret; |
| } |
| |
| static ssize_t sec_nfc_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct sec_nfc_info *info = container_of(file->private_data, |
| struct sec_nfc_info, miscdev); |
| int ret = 0; |
| |
| NFC_LOG_DBG("write() count %d\n", (u32)count); |
| |
| #ifdef FEATURE_SEC_NFC_TEST |
| if (on_nfc_test) |
| return 0; |
| #endif |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->mode == SEC_NFC_MODE_OFF) { |
| NFC_LOG_ERR("write() nfc is not enabled\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| if (count > info->i2c_info.buflen) |
| count = info->i2c_info.buflen; |
| |
| if (count > SEC_NFC_MSG_MAX_SIZE) { |
| NFC_LOG_ERR("write() user required wrong size :%d\n", (u32)count); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (copy_from_user(info->i2c_info.buf, buf, count)) { |
| NFC_LOG_ERR("write() copy failed from user\n"); |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| /* Skip interrupt during power switching |
| * It is released after first write |
| */ |
| NFC_LOG_REC("write(%d)\n", count); |
| mutex_lock(&info->i2c_info.read_mutex); |
| ret = i2c_master_send(info->i2c_info.i2c_dev, info->i2c_info.buf, count); |
| if (info->i2c_info.read_irq == SEC_NFC_SKIP) |
| info->i2c_info.read_irq = SEC_NFC_NONE; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| |
| if (ret == -EREMOTEIO) { |
| NFC_LOG_ERR("write failed: return: %d count: %d\n", |
| ret, (u32)count); |
| ret = -ERESTART; |
| goto write_error; |
| } |
| if (ret != count) { |
| NFC_LOG_ERR("write failed: return: %d count: %d\n", |
| ret, (u32)count); |
| ret = -EREMOTEIO; |
| goto write_error; |
| } |
| |
| goto out; |
| |
| write_error: |
| nfc_state_print(info); |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return ret; |
| } |
| |
| static unsigned int sec_nfc_poll(struct file *file, poll_table *wait) |
| { |
| struct sec_nfc_info *info = container_of(file->private_data, |
| struct sec_nfc_info, miscdev); |
| enum sec_nfc_irq irq; |
| |
| int ret = 0; |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->mode == SEC_NFC_MODE_OFF) { |
| NFC_LOG_ERR("poll() nfc is not enabled\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| poll_wait(file, &info->i2c_info.read_wait, wait); |
| |
| mutex_lock(&info->i2c_info.read_mutex); |
| irq = info->i2c_info.read_irq; |
| if (irq == SEC_NFC_READ_TIMES) |
| ret = (POLLIN | POLLRDNORM); |
| mutex_unlock(&info->i2c_info.read_mutex); |
| |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_SEC_NFC_LDO_CONTROL |
| static int sec_nfc_regulator_onoff(struct sec_nfc_platform_data *data, int onoff) |
| { |
| int rc = 0; |
| struct regulator *regulator_i2c_1p8; |
| |
| regulator_i2c_1p8 = regulator_get(NULL, data->i2c_1p8); |
| if (IS_ERR(regulator_i2c_1p8) || regulator_i2c_1p8 == NULL) { |
| NFC_LOG_ERR("nfc_pvdd regulator_get fail\n"); |
| return -ENODEV; |
| } |
| |
| NFC_LOG_INFO("regulator onoff = %d\n", onoff); |
| |
| if (onoff == NFC_I2C_LDO_ON) { |
| rc = regulator_enable(regulator_i2c_1p8); |
| if (rc) { |
| NFC_LOG_ERR("regulator enable nfc_pvdd failed, rc=%d\n", rc); |
| goto done; |
| } |
| } else { |
| rc = regulator_disable(regulator_i2c_1p8); |
| if (rc) { |
| NFC_LOG_ERR("regulator disable nfc_pvdd failed, rc=%d\n", rc); |
| goto done; |
| } |
| } |
| |
| done: |
| regulator_put(regulator_i2c_1p8); |
| |
| return rc; |
| } |
| #endif |
| |
| void sec_nfc_i2c_irq_clear(struct sec_nfc_info *info) |
| { |
| /* clear interrupt. Interrupt will be occurred at power off */ |
| mutex_lock(&info->i2c_info.read_mutex); |
| info->i2c_info.read_irq = SEC_NFC_NONE; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| } |
| |
| int sec_nfc_i2c_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct sec_nfc_info *info = dev_get_drvdata(dev); |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| struct property *prop; |
| struct device_node *np = dev->of_node; |
| int ret; |
| |
| NFC_LOG_INFO("probe() start\n"); |
| |
| info->i2c_info.buflen = SEC_NFC_MAX_BUFFER_SIZE; |
| info->i2c_info.buf = kzalloc(SEC_NFC_MAX_BUFFER_SIZE, GFP_KERNEL); |
| if (!info->i2c_info.buf) { |
| NFC_LOG_ERR("probe() failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| info->i2c_info.i2c_dev = client; |
| info->i2c_info.read_irq = SEC_NFC_NONE; |
| mutex_init(&info->i2c_info.read_mutex); |
| init_waitqueue_head(&info->i2c_info.read_wait); |
| i2c_set_clientdata(client, info); |
| |
| ret = gpio_request(pdata->irq, "nfc_int"); |
| if (ret) { |
| NFC_LOG_ERR("probe() GPIO request is failed to register IRQ\n"); |
| goto err_irq_req; |
| } |
| client->irq = gpio_to_irq(pdata->irq); |
| NFC_LOG_INFO("push interrupt no = %d\n", client->irq); |
| |
| ret = request_threaded_irq(client->irq, NULL, sec_nfc_irq_thread_fn, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, SEC_NFC_DRIVER_NAME, |
| info); |
| if (ret < 0) { |
| NFC_LOG_ERR("probe() failed to register IRQ handler\n"); |
| kfree(info->i2c_info.buf); |
| return ret; |
| } |
| |
| prop = of_find_property(np, "sec-nfc,nfc_clkint", NULL); |
| if(prop){ |
| info->clk_irq = gpio_to_irq(pdata->clk_irq); |
| ret = request_threaded_irq(info->clk_irq, NULL, sec_nfc_clk_irq, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "nfc_clk", |
| info); |
| if (ret < 0) { |
| NFC_LOG_ERR("failed to register IRQ handler\n"); |
| kfree(info->i2c_info.buf); |
| return ret; |
| } |
| ret = enable_irq_wake(info->clk_irq); |
| if (ret < 0) |
| NFC_LOG_ERR("%s: Failed to Enable Wakeup Source(%d)\n", __func__, ret); |
| } |
| |
| prop = of_find_property(np, "sec-nfc,pvdd_en", NULL); |
| if(prop){ |
| ret = gpio_request(pdata->pvdd_en, "nfc_pvdd_en"); |
| if (ret < 0){ |
| NFC_LOG_ERR("failed to request about pvdd_en pin\n"); |
| return -ENODEV; |
| } |
| if(!lpcharge) { |
| gpio_direction_output(pdata->pvdd_en, 1); |
| } |
| NFC_LOG_INFO("pvdd en: %d\n", gpio_get_value(pdata->pvdd_en)); |
| } |
| #ifdef CONFIG_SEC_NFC_LDO_CONTROL |
| if (pdata->i2c_1p8 != NULL) { |
| if(!lpcharge) { |
| ret = sec_nfc_regulator_onoff(pdata, NFC_I2C_LDO_ON); |
| if (ret < 0) |
| NFC_LOG_ERR("max86900_regulator_on fail err = %d\n", ret); |
| usleep_range(1000, 1100); |
| } |
| } |
| #endif |
| NFC_LOG_INFO("probe() success\n"); |
| return 0; |
| |
| err_irq_req: |
| return ret; |
| } |
| |
| void sec_nfc_i2c_remove(struct device *dev) |
| { |
| struct sec_nfc_info *info = dev_get_drvdata(dev); |
| struct i2c_client *client = info->i2c_info.i2c_dev; |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| free_irq(client->irq, info); |
| gpio_free(pdata->irq); |
| } |
| #endif /* CONFIG_SEC_NFC_IF_I2C */ |
| |
| static void set_pd(struct sec_nfc_info *info, int power) |
| { |
| struct device_node *np = info->dev->of_node; |
| struct property *prop; |
| prop = of_find_property(np, "sec-nfc,ven-gpio", NULL); |
| if (prop) { |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| gpio_set_value(pdata->ven, power); |
| } |
| else { |
| unsigned int val = readl(info->clkctrl); |
| int pd_active = (val & SEC_NFC_CLKCTRL_PD_POLA); |
| |
| if (pd_active > 0) { |
| if (power == SEC_NFC_PW_ON) |
| val |= SEC_NFC_CLKCTRL_PD; |
| else |
| val &= ~SEC_NFC_CLKCTRL_PD; |
| } else { |
| if (power == SEC_NFC_PW_ON) |
| val &= ~SEC_NFC_CLKCTRL_PD; |
| else |
| val |= SEC_NFC_CLKCTRL_PD; |
| } |
| writel(val, info->clkctrl); |
| } |
| } |
| |
| #ifdef CONFIG_SEC_NFC_CLK_REQ |
| static irqreturn_t sec_nfc_clk_irq_thread(int irq, void *dev_id) |
| { |
| struct sec_nfc_info *info = dev_id; |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| bool value; |
| |
| value = gpio_get_value(pdata->clk_req) > 0 ? true : false; |
| NFC_LOG_REC("clock req: %d\n", value); |
| |
| value = gpio_get_value(pdata->clk_req) > 0 ? 1 : 0; |
| gpio_set_value(pdata->clk, value); |
| |
| info->clk_state = value; |
| |
| return IRQ_HANDLED; |
| } |
| |
| void sec_nfc_clk_ctl_enable(struct sec_nfc_info *info) |
| { |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| unsigned int irq = gpio_to_irq(pdata->clk_req); |
| int ret; |
| |
| if (info->clk_ctl) |
| return; |
| |
| info->clk_state = false; |
| ret = request_threaded_irq(irq, NULL, sec_nfc_clk_irq_thread, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| SEC_NFC_DRIVER_NAME, info); |
| if (ret < 0) { |
| NFC_LOG_ERR(info->dev, "failed to register CLK REQ IRQ handler\n"); |
| } |
| info->clk_ctl = true; |
| } |
| void sec_nfc_clk_ctl_disable(struct sec_nfc_info *info) |
| { |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| unsigned int irq = gpio_to_irq(pdata->clk_req); |
| |
| if (!info->clk_ctl) |
| return; |
| |
| free_irq(irq, info); |
| if (info->clk_state) |
| clk_disable_unprepare(pdata->clk); |
| |
| info->clk_state = false; |
| info->clk_ctl = false; |
| } |
| #else |
| #define sec_nfc_clk_ctl_enable(x) |
| #define sec_nfc_clk_ctl_disable(x) |
| #endif /* CONFIG_SEC_NFC_CLK_REQ */ |
| |
| static void sec_nfc_set_mode(struct sec_nfc_info *info, |
| enum sec_nfc_mode mode) |
| { |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| |
| /* intfo lock is aleady gotten before calling this function */ |
| if (info->mode == mode) { |
| NFC_LOG_DBG("power mode is already %d", mode); |
| return; |
| } |
| info->mode = mode; |
| |
| #ifdef CONFIG_SEC_NFC_IF_I2C |
| /* Skip interrupt during power switching |
| * It is released after first write |
| */ |
| mutex_lock(&info->i2c_info.read_mutex); |
| info->i2c_info.read_irq = SEC_NFC_SKIP; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| #endif |
| |
| set_pd(info, SEC_NFC_PW_OFF); |
| if (pdata->firm) gpio_set_value(pdata->firm, SEC_NFC_FW_OFF); |
| |
| if (mode == SEC_NFC_MODE_BOOTLOADER) |
| if (pdata->firm) gpio_set_value(pdata->firm, SEC_NFC_FW_ON); |
| |
| if (mode != SEC_NFC_MODE_OFF) { |
| msleep(SEC_NFC_VEN_WAIT_TIME); |
| set_pd(info, SEC_NFC_PW_ON); |
| #ifdef CONFIG_SEC_NFC_IF_I2C |
| enable_irq_wake(info->i2c_info.i2c_dev->irq); |
| #endif |
| msleep(SEC_NFC_VEN_WAIT_TIME/2); |
| } else { |
| #ifdef CONFIG_SEC_NFC_IF_I2C |
| disable_irq_wake(info->i2c_info.i2c_dev->irq); |
| #endif |
| } |
| |
| if (wake_lock_active(&info->nfc_wake_lock)) |
| wake_unlock(&info->nfc_wake_lock); |
| |
| NFC_LOG_INFO("NFC mode is : %d\n", mode); |
| } |
| |
| static long sec_nfc_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct sec_nfc_info *info = container_of(file->private_data, |
| struct sec_nfc_info, miscdev); |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| unsigned int new = (unsigned int)arg; |
| int ret = 0; |
| |
| NFC_LOG_DBG("cmd: 0x%x\n", cmd); |
| |
| mutex_lock(&info->mutex); |
| |
| switch (cmd) { |
| case SEC_NFC_DEBUG: |
| NFC_LOG_ERR("SEC_NFC_DEBUG\n"); |
| nfc_state_print(info); |
| break; |
| case SEC_NFC_SET_MODE: |
| NFC_LOG_DBG("%s: SEC_NFC_SET_MODE\n", __func__); |
| |
| if (info->mode == new) |
| break; |
| |
| if (new >= SEC_NFC_MODE_COUNT) { |
| NFC_LOG_ERR("wrong mode (%d)\n", new); |
| ret = -EFAULT; |
| break; |
| } |
| sec_nfc_set_mode(info, new); |
| |
| break; |
| |
| #if defined(CONFIG_SEC_NFC_PRODUCT_N5) |
| case SEC_NFC_SLEEP: |
| if (info->mode != SEC_NFC_MODE_BOOTLOADER) { |
| if (wake_lock_active(&info->nfc_wake_lock)) |
| wake_unlock(&info->nfc_wake_lock); |
| gpio_set_value(pdata->wake, SEC_NFC_WAKE_SLEEP); |
| } |
| break; |
| |
| case SEC_NFC_WAKEUP: |
| if (info->mode != SEC_NFC_MODE_BOOTLOADER) { |
| gpio_set_value(pdata->wake, SEC_NFC_WAKE_UP); |
| if (!wake_lock_active(&info->nfc_wake_lock)) |
| wake_lock(&info->nfc_wake_lock); |
| } |
| break; |
| #endif |
| case SEC_NFC_SET_NPT_MODE: |
| if (SEC_NFC_NPT_CMD_ON == new) { |
| NFC_LOG_INFO("NPT: NFC OFF mode NPT - Turn on VEN.\n"); |
| info->mode = SEC_NFC_MODE_FIRMWARE; |
| mutex_lock(&info->i2c_info.read_mutex); |
| info->i2c_info.read_irq = SEC_NFC_SKIP; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| set_pd(info, SEC_NFC_PW_ON); |
| #ifdef CONFIG_SEC_NFC_CLK_REQ |
| sec_nfc_clk_ctl_enable(info); |
| #endif |
| msleep(20); |
| if (pdata->firm) gpio_set_value(pdata->firm, SEC_NFC_FW_ON); |
| enable_irq_wake(info->i2c_info.i2c_dev->irq); |
| } else if(SEC_NFC_NPT_CMD_OFF == new) { |
| NFC_LOG_INFO("NPT: NFC OFF mode NPT - Turn off VEN.\n"); |
| info->mode = SEC_NFC_MODE_OFF; |
| if (pdata->firm) gpio_set_value(pdata->firm, SEC_NFC_FW_OFF); |
| set_pd(info, SEC_NFC_PW_OFF); |
| #ifdef CONFIG_SEC_NFC_CLK_REQ |
| sec_nfc_clk_ctl_disable(info); |
| #endif |
| disable_irq_wake(info->i2c_info.i2c_dev->irq); |
| } |
| break; |
| default: |
| NFC_LOG_ERR("Unknown ioctl 0x%x\n", cmd); |
| ret = -ENOIOCTLCMD; |
| break; |
| } |
| |
| mutex_unlock(&info->mutex); |
| |
| return ret; |
| } |
| |
| static int sec_nfc_open(struct inode *inode, struct file *file) |
| { |
| struct sec_nfc_info *info = container_of(file->private_data, |
| struct sec_nfc_info, miscdev); |
| int ret = 0; |
| |
| NFC_LOG_INFO("%s\n", __func__); |
| |
| mutex_lock(&info->mutex); |
| if (info->mode != SEC_NFC_MODE_OFF) { |
| NFC_LOG_ERR("open() nfc is busy\n"); |
| nfc_state_print(info); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| sec_nfc_set_mode(info, SEC_NFC_MODE_OFF); |
| |
| out: |
| mutex_unlock(&info->mutex); |
| return ret; |
| } |
| |
| static int sec_nfc_close(struct inode *inode, struct file *file) |
| { |
| struct sec_nfc_info *info = container_of(file->private_data, |
| struct sec_nfc_info, miscdev); |
| nfc_state_print(info); |
| |
| NFC_LOG_INFO("%s\n", __func__); |
| |
| mutex_lock(&info->mutex); |
| sec_nfc_set_mode(info, SEC_NFC_MODE_OFF); |
| mutex_unlock(&info->mutex); |
| |
| return 0; |
| } |
| |
| static const struct file_operations sec_nfc_fops = { |
| .owner = THIS_MODULE, |
| .read = sec_nfc_read, |
| .write = sec_nfc_write, |
| .poll = sec_nfc_poll, |
| .open = sec_nfc_open, |
| .release = sec_nfc_close, |
| .unlocked_ioctl = sec_nfc_ioctl, |
| .compat_ioctl = sec_nfc_ioctl, |
| }; |
| |
| #ifdef CONFIG_PM |
| static int sec_nfc_suspend(struct device *dev) |
| { |
| struct sec_nfc_info *info = SEC_NFC_GET_INFO(dev); |
| int ret = 0; |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->mode == SEC_NFC_MODE_BOOTLOADER) |
| ret = -EPERM; |
| |
| mutex_unlock(&info->mutex); |
| |
| return ret; |
| } |
| |
| static int sec_nfc_resume(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(sec_nfc_pm_ops, sec_nfc_suspend, sec_nfc_resume); |
| #endif |
| |
| #ifdef CONFIG_OF |
| /*device tree parsing*/ |
| static int sec_nfc_parse_dt(struct device *dev, |
| struct sec_nfc_platform_data *pdata) |
| { |
| struct device_node *np = dev->of_node; |
| struct property *prop; |
| |
| prop = of_find_property(np, "sec-nfc,ven-gpio", NULL); |
| if (prop) |
| pdata->ven = of_get_named_gpio(np, "sec-nfc,ven-gpio", 0); |
| else { |
| if (of_property_read_u32(np, "clkctrl-reg", (u32 *)&pdata->clkctrl_addr)) |
| return -EINVAL; |
| } |
| pdata->firm = of_get_named_gpio(np, "sec-nfc,firm-gpio", 0); |
| pdata->wake = pdata->firm; |
| |
| prop = of_find_property(np, "sec-nfc,nfc_clkint", NULL); |
| if(prop) |
| pdata->clk_irq = of_get_named_gpio(np, "sec-nfc,nfc_clkint", 0); |
| |
| #ifdef CONFIG_SEC_NFC_IF_I2C |
| pdata->irq = of_get_named_gpio(np, "sec-nfc,irq-gpio", 0); |
| #endif |
| #ifdef CONFIG_SEC_NFC_CLK_REQ |
| pdata->clk_req = of_get_named_gpio(np, "sec-nfc,clk_req-gpio", 0); |
| #endif |
| prop = of_find_property(np, "sec-nfc,pvdd_en", NULL); |
| if(prop) |
| pdata->pvdd_en = of_get_named_gpio(np, "sec-nfc,pvdd_en",0); |
| |
| #ifdef CONFIG_SEC_NFC_LDO_CONTROL |
| if (of_property_read_string(np, "sec-nfc,i2c_1p8", |
| &pdata->i2c_1p8) < 0) { |
| NFC_LOG_ERR("%s - get i2c_1p8 error\n", __func__); |
| pdata->i2c_1p8 = NULL; |
| } |
| #endif |
| if (prop) { |
| NFC_LOG_INFO("%s: irq : %d, firm : %d\n",__func__, pdata->irq, pdata->firm); |
| } else |
| NFC_LOG_INFO("%s: clk_req_ addr , irq : %d, \n",__func__,pdata->irq); |
| return 0; |
| } |
| #else |
| static int sec_nfc_parse_dt(struct device *dev, |
| struct sec_nfc_platform_data *pdata) |
| { |
| return -ENODEV; |
| } |
| #endif |
| |
| #ifdef FEATURE_SEC_NFC_TEST |
| static int sec_nfc_i2c_read(char *buf, int count) |
| { |
| struct sec_nfc_info *info = g_nfc_info; |
| int ret = 0; |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->mode == SEC_NFC_MODE_OFF) { |
| NFC_LOG_ERR("NFC_TEST: sec_nfc is not enabled\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| /* i2c recv */ |
| if (count > info->i2c_info.buflen) |
| count = info->i2c_info.buflen; |
| |
| if (count > SEC_NFC_MSG_MAX_SIZE) { |
| NFC_LOG_ERR("NFC_TEST: user required wrong size :%d\n", (u32)count); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| mutex_lock(&info->i2c_info.read_mutex); |
| memset(buf, 0, count); |
| ret = i2c_master_recv(info->i2c_info.i2c_dev, buf, (u32)count); |
| NFC_LOG_INFO("NFC_TEST: recv size : %d\n", ret); |
| |
| if (ret == -EREMOTEIO) { |
| ret = -ERESTART; |
| goto read_error; |
| } else if (ret != count) { |
| NFC_LOG_ERR("NFC_TEST: read failed: return: %d count: %d\n", |
| ret, (u32)count); |
| goto read_error; |
| } |
| |
| mutex_unlock(&info->i2c_info.read_mutex); |
| |
| goto out; |
| |
| read_error: |
| info->i2c_info.read_irq = SEC_NFC_NONE; |
| mutex_unlock(&info->i2c_info.read_mutex); |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return ret; |
| } |
| |
| static int sec_nfc_i2c_write(char *buf, int count) |
| { |
| struct sec_nfc_info *info = g_nfc_info; |
| int ret = 0; |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->mode == SEC_NFC_MODE_OFF) { |
| NFC_LOG_ERR("NFC_TEST: sec_nfc is not enabled\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| if (count > info->i2c_info.buflen) |
| count = info->i2c_info.buflen; |
| |
| if (count > SEC_NFC_MSG_MAX_SIZE) { |
| NFC_LOG_ERR("NFC_TEST: user required wrong size :%d\n", (u32)count); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| mutex_lock(&info->i2c_info.read_mutex); |
| ret = i2c_master_send(info->i2c_info.i2c_dev, buf, count); |
| mutex_unlock(&info->i2c_info.read_mutex); |
| if (ret == -EREMOTEIO) { |
| NFC_LOG_ERR("NFC_TEST: send failed: return: %d count: %d\n", |
| ret, (u32)count); |
| ret = -ERESTART; |
| goto out; |
| } |
| |
| if (ret != count) { |
| NFC_LOG_ERR("NFC_TEST: send failed: return: %d count: %d\n", |
| ret, (u32)count); |
| ret = -EREMOTEIO; |
| } |
| |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return ret; |
| } |
| |
| static ssize_t sec_nfc_test_show(struct class *class, |
| struct class_attribute *attr, |
| char *buf) |
| { |
| char cmd[8] = {0x0, 0x1, 0x0, 0x0,}; /*bootloader fw check*/ |
| enum sec_nfc_mode old_mode = g_nfc_info->mode; |
| int size; |
| int ret = 0; |
| int timeout = 1; |
| |
| on_nfc_test = true; |
| nfc_int_wait = false; |
| sec_nfc_set_mode(g_nfc_info, SEC_NFC_MODE_BOOTLOADER); |
| ret = sec_nfc_i2c_write(cmd, 4); |
| |
| if (ret < 0) { |
| NFC_LOG_INFO("NFC_TEST: i2c write error %d\n", ret); |
| size = sprintf(buf, "NFC_TEST: i2c write error %d\n", ret); |
| goto exit; |
| } |
| |
| timeout = wait_event_interruptible_timeout(g_nfc_info->i2c_info.read_wait, nfc_int_wait, 100); |
| ret = sec_nfc_i2c_read(buf, 16); |
| |
| if (ret < 0) { |
| NFC_LOG_INFO("NFC_TEST: i2c read error %d\n", ret); |
| size = sprintf(buf, "NFC_TEST: i2c read error %d\n", ret); |
| goto exit; |
| } |
| NFC_LOG_INFO("NFC_TEST: BL ver: %02X %02X %02X %02X, INT: %s\n", buf[0], |
| buf[1], buf[2], buf[3], timeout ? "OK":"NOK"); |
| size = sprintf(buf, "BL ver: %02X.%02X.%02X.%02X, INT: %s\n", buf[0], |
| buf[1], buf[2], buf[3], timeout ? "OK":"NOK"); |
| |
| exit: |
| sec_nfc_set_mode(g_nfc_info, old_mode); |
| on_nfc_test = false; |
| |
| return size; |
| } |
| static ssize_t sec_nfc_test_store(struct class *dev, |
| struct class_attribute *attr, |
| const char *buf, size_t size) |
| { |
| return size; |
| } |
| |
| static CLASS_ATTR(test, 0664, sec_nfc_test_show, sec_nfc_test_store); |
| #endif |
| |
| static ssize_t sec_nfc_support_show(struct class *class, |
| struct class_attribute *attr, |
| char *buf) |
| { |
| NFC_LOG_INFO("\n"); |
| return 0; |
| } |
| static CLASS_ATTR(nfc_support, 0444, sec_nfc_support_show, NULL); |
| |
| static int __sec_nfc_probe(struct device *dev) |
| { |
| struct sec_nfc_info *info; |
| struct sec_nfc_platform_data *pdata = NULL; |
| int ret = 0; |
| struct device_node *np = dev->of_node; |
| struct property *prop; |
| unsigned int val = 0; |
| int nfc_support = 0; |
| #ifdef FEATURE_SEC_NFC_TEST |
| struct class *nfc_class; |
| #endif |
| NFC_LOG_INFO("probe start\n"); |
| if (dev->of_node) { |
| pdata = devm_kzalloc(dev, |
| sizeof(struct sec_nfc_platform_data), GFP_KERNEL); |
| if (!pdata) { |
| NFC_LOG_ERR("probe() Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| ret = sec_nfc_parse_dt(dev, pdata); |
| if (ret) |
| return ret; |
| } else { |
| pdata = dev->platform_data; |
| } |
| |
| if (!pdata) { |
| NFC_LOG_ERR("probe() No platform data\n"); |
| ret = -ENOMEM; |
| goto err_pdata; |
| } |
| |
| info = kzalloc(sizeof(struct sec_nfc_info), GFP_KERNEL); |
| if (!info) { |
| NFC_LOG_ERR("probe() failed to allocate memory for sec_nfc_info\n"); |
| ret = -ENOMEM; |
| goto err_info_alloc; |
| } |
| info->dev = dev; |
| info->pdata = pdata; |
| info->mode = SEC_NFC_MODE_OFF; |
| |
| mutex_init(&info->mutex); |
| dev_set_drvdata(dev, info); |
| |
| info->miscdev.minor = MISC_DYNAMIC_MINOR; |
| info->miscdev.name = SEC_NFC_DRIVER_NAME; |
| info->miscdev.fops = &sec_nfc_fops; |
| info->miscdev.parent = dev; |
| |
| /*separate NFC / non NFC using GPIO*/ |
| prop = of_find_property(np, "sec-nfc,check_nfc", NULL); |
| if (prop) { |
| nfc_support = gpio_get_value(of_get_named_gpio(np, "sec-nfc,check_nfc", 0)); |
| if (nfc_support > 0) { |
| NFC_LOG_INFO("%s : nfc support model : %d\n", __func__, nfc_support); |
| }else{ |
| NFC_LOG_INFO("%s : nfc not support model : %d\n", __func__, nfc_support); |
| return -ENXIO; |
| } |
| } |
| |
| ret = misc_register(&info->miscdev); |
| if (ret < 0) { |
| NFC_LOG_ERR("probe() failed to register Device\n"); |
| goto err_dev_reg; |
| } |
| |
| prop = of_find_property(np, "sec-nfc,ven-gpio", NULL); |
| if (prop) { |
| ret = gpio_request(pdata->ven, "nfc_ven"); |
| if (ret) { |
| NFC_LOG_ERR("failed to get gpio ven\n"); |
| goto err_gpio_ven; |
| } |
| gpio_direction_output(pdata->ven, SEC_NFC_PW_OFF); |
| } else { |
| if (pdata->clkctrl_addr != 0) { |
| info->clkctrl = ioremap_nocache(pdata->clkctrl_addr, 0x4); |
| if (!info->clkctrl) { |
| NFC_LOG_ERR("cannot remap register\n"); |
| ret = -ENXIO; |
| goto err_iomap; |
| } |
| val |= (SEC_NFC_CLKCTRL_REQ_POLA | SEC_NFC_CLKCTRL_CLK_ENABLE); |
| writel(val, info->clkctrl); |
| } |
| } |
| |
| if (pdata->firm) |
| { |
| ret = gpio_request(pdata->firm, "nfc_firm"); |
| if (ret) { |
| NFC_LOG_ERR("probe() failed to get gpio firm\n"); |
| goto err_gpio_firm; |
| } |
| gpio_direction_output(pdata->firm, SEC_NFC_FW_OFF); |
| } |
| |
| wake_lock_init(&info->nfc_wake_lock, WAKE_LOCK_SUSPEND, "nfc_wake_lock"); |
| |
| #ifdef FEATURE_SEC_NFC_TEST |
| g_nfc_info = info; |
| nfc_class = class_create(THIS_MODULE, "nfc_test"); |
| if (IS_ERR(&nfc_class)) |
| NFC_LOG_ERR("NFC: failed to create nfc_test class\n"); |
| else { |
| ret = class_create_file(nfc_class, &class_attr_test); |
| if (ret) |
| NFC_LOG_ERR("NFC: failed to create attr_test\n"); |
| } |
| #endif |
| nfc_class = class_create(THIS_MODULE, "nfc"); |
| if (IS_ERR(&nfc_class)) |
| NFC_LOG_ERR("NFC: failed to create nfc class\n"); |
| else { |
| ret = class_create_file(nfc_class, &class_attr_nfc_support); |
| if (ret) |
| NFC_LOG_ERR("NFC: failed to create attr_nfc_support\n"); |
| } |
| NFC_LOG_INFO("probe() success\n"); |
| |
| return 0; |
| |
| err_gpio_firm: |
| if (prop) |
| gpio_free(pdata->ven); |
| err_gpio_ven: |
| if (!prop) |
| iounmap(info->clkctrl); |
| err_iomap: |
| err_dev_reg: |
| kfree(info); |
| err_info_alloc: |
| err_pdata: |
| return ret; |
| } |
| |
| static int __sec_nfc_remove(struct device *dev) |
| { |
| struct sec_nfc_info *info = dev_get_drvdata(dev); |
| struct sec_nfc_platform_data *pdata = info->pdata; |
| struct device_node *np = dev->of_node; |
| struct property *prop; |
| |
| NFC_LOG_DBG("remove\n"); |
| |
| misc_deregister(&info->miscdev); |
| sec_nfc_set_mode(info, SEC_NFC_MODE_OFF); |
| gpio_set_value(pdata->firm, 0); |
| prop = of_find_property(np, "sec-nfc,ven-gpio", NULL); |
| if (prop) |
| gpio_free(pdata->ven); |
| else |
| iounmap(info->clkctrl); |
| if (pdata->firm) gpio_free(pdata->firm); |
| wake_lock_destroy(&info->nfc_wake_lock); |
| |
| kfree(info); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_SEC_NFC_IF_I2C |
| MODULE_DEVICE_TABLE(i2c, sec_nfc_id_table); |
| typedef struct i2c_driver sec_nfc_driver_type; |
| #define SEC_NFC_INIT(driver) i2c_add_driver(driver); |
| #define SEC_NFC_EXIT(driver) i2c_del_driver(driver); |
| |
| static int sec_nfc_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret = 0; |
| |
| nfc_logger_init(); |
| #ifdef CONFIG_ESE_SECURE |
| ret = exynos_smc(0x83000032, 0 , 0, 0); |
| if (ret == EBUSY) { |
| NFC_LOG_ERR("[NFC] eSE spi secure fail!\n"); |
| return -EBUSY; |
| } |
| #endif |
| ret = __sec_nfc_probe(&client->dev); |
| if (ret) |
| return ret; |
| |
| if (sec_nfc_i2c_probe(client)) |
| __sec_nfc_remove(&client->dev); |
| |
| return ret; |
| } |
| |
| static int sec_nfc_remove(struct i2c_client *client) |
| { |
| sec_nfc_i2c_remove(&client->dev); |
| return __sec_nfc_remove(&client->dev); |
| } |
| |
| static struct i2c_device_id sec_nfc_id_table[] = { |
| { SEC_NFC_DRIVER_NAME, 0 }, |
| { } |
| }; |
| |
| #else /* CONFIG_SEC_NFC_IF_I2C */ |
| MODULE_DEVICE_TABLE(platform, sec_nfc_id_table); |
| typedef struct platform_driver sec_nfc_driver_type; |
| #define SEC_NFC_INIT(driver) platform_driver_register(driver); |
| #define SEC_NFC_EXIT(driver) platform_driver_unregister(driver); |
| |
| static int sec_nfc_probe(struct platform_device *pdev) |
| { |
| return __sec_nfc_probe(&pdev->dev); |
| } |
| |
| static int sec_nfc_remove(struct platform_device *pdev) |
| { |
| return __sec_nfc_remove(&pdev->dev); |
| } |
| |
| static struct platform_device_id sec_nfc_id_table[] = { |
| { SEC_NFC_DRIVER_NAME, 0 }, |
| { } |
| }; |
| |
| #endif /* CONFIG_SEC_NFC_IF_I2C */ |
| |
| #ifdef CONFIG_OF |
| static struct of_device_id nfc_match_table[] = { |
| { .compatible = SEC_NFC_DRIVER_NAME,}, |
| {}, |
| }; |
| #else |
| #define nfc_match_table NULL |
| #endif |
| |
| static sec_nfc_driver_type sec_nfc_driver = { |
| .probe = sec_nfc_probe, |
| .id_table = sec_nfc_id_table, |
| .remove = sec_nfc_remove, |
| .driver = { |
| .name = SEC_NFC_DRIVER_NAME, |
| #ifdef CONFIG_PM |
| .pm = &sec_nfc_pm_ops, |
| #endif |
| .of_match_table = nfc_match_table, |
| }, |
| }; |
| |
| static int __init sec_nfc_init(void) |
| { |
| return SEC_NFC_INIT(&sec_nfc_driver); |
| } |
| |
| static void __exit sec_nfc_exit(void) |
| { |
| SEC_NFC_EXIT(&sec_nfc_driver); |
| } |
| |
| module_init(sec_nfc_init); |
| module_exit(sec_nfc_exit); |
| |
| MODULE_DESCRIPTION("Samsung sec_nfc driver"); |
| MODULE_LICENSE("GPL"); |