| S390 Debug Feature |
| ================== |
| |
| files: arch/s390/kernel/debug.c |
| include/asm-s390/debug.h |
| |
| Description: |
| ------------ |
| The goal of this feature is to provide a kernel debug logging API |
| where log records can be stored efficiently in memory, where each component |
| (e.g. device drivers) can have one separate debug log. |
| One purpose of this is to inspect the debug logs after a production system crash |
| in order to analyze the reason for the crash. |
| If the system still runs but only a subcomponent which uses dbf fails, |
| it is possible to look at the debug logs on a live system via the Linux |
| debugfs filesystem. |
| The debug feature may also very useful for kernel and driver development. |
| |
| Design: |
| ------- |
| Kernel components (e.g. device drivers) can register themselves at the debug |
| feature with the function call debug_register(). This function initializes a |
| debug log for the caller. For each debug log exists a number of debug areas |
| where exactly one is active at one time. Each debug area consists of contiguous |
| pages in memory. In the debug areas there are stored debug entries (log records) |
| which are written by event- and exception-calls. |
| |
| An event-call writes the specified debug entry to the active debug |
| area and updates the log pointer for the active area. If the end |
| of the active debug area is reached, a wrap around is done (ring buffer) |
| and the next debug entry will be written at the beginning of the active |
| debug area. |
| |
| An exception-call writes the specified debug entry to the log and |
| switches to the next debug area. This is done in order to be sure |
| that the records which describe the origin of the exception are not |
| overwritten when a wrap around for the current area occurs. |
| |
| The debug areas itselve are also ordered in form of a ring buffer. |
| When an exception is thrown in the last debug area, the following debug |
| entries are then written again in the very first area. |
| |
| There are three versions for the event- and exception-calls: One for |
| logging raw data, one for text and one for numbers. |
| |
| Each debug entry contains the following data: |
| |
| - Timestamp |
| - Cpu-Number of calling task |
| - Level of debug entry (0...6) |
| - Return Address to caller |
| - Flag, if entry is an exception or not |
| |
| The debug logs can be inspected in a live system through entries in |
| the debugfs-filesystem. Under the toplevel directory "s390dbf" there is |
| a directory for each registered component, which is named like the |
| corresponding component. The debugfs normally should be mounted to |
| /sys/kernel/debug therefore the debug feature can be accessed unter |
| /sys/kernel/debug/s390dbf. |
| |
| The content of the directories are files which represent different views |
| to the debug log. Each component can decide which views should be |
| used through registering them with the function debug_register_view(). |
| Predefined views for hex/ascii, sprintf and raw binary data are provided. |
| It is also possible to define other views. The content of |
| a view can be inspected simply by reading the corresponding debugfs file. |
| |
| All debug logs have an an actual debug level (range from 0 to 6). |
| The default level is 3. Event and Exception functions have a 'level' |
| parameter. Only debug entries with a level that is lower or equal |
| than the actual level are written to the log. This means, when |
| writing events, high priority log entries should have a low level |
| value whereas low priority entries should have a high one. |
| The actual debug level can be changed with the help of the debugfs-filesystem |
| through writing a number string "x" to the 'level' debugfs file which is |
| provided for every debug log. Debugging can be switched off completely |
| by using "-" on the 'level' debugfs file. |
| |
| Example: |
| |
| > echo "-" > /sys/kernel/debug/s390dbf/dasd/level |
| |
| It is also possible to deactivate the debug feature globally for every |
| debug log. You can change the behavior using 2 sysctl parameters in |
| /proc/sys/s390dbf: |
| There are currently 2 possible triggers, which stop the debug feature |
| globally. The first possibility is to use the "debug_active" sysctl. If |
| set to 1 the debug feature is running. If "debug_active" is set to 0 the |
| debug feature is turned off. |
| The second trigger which stops the debug feature is an kernel oops. |
| That prevents the debug feature from overwriting debug information that |
| happened before the oops. After an oops you can reactivate the debug feature |
| by piping 1 to /proc/sys/s390dbf/debug_active. Nevertheless, its not |
| suggested to use an oopsed kernel in an production environment. |
| If you want to disallow the deactivation of the debug feature, you can use |
| the "debug_stoppable" sysctl. If you set "debug_stoppable" to 0 the debug |
| feature cannot be stopped. If the debug feature is already stopped, it |
| will stay deactivated. |
| |
| Kernel Interfaces: |
| ------------------ |
| |
| ---------------------------------------------------------------------------- |
| debug_info_t *debug_register(char *name, int pages, int nr_areas, |
| int buf_size); |
| |
| Parameter: name: Name of debug log (e.g. used for debugfs entry) |
| pages: number of pages, which will be allocated per area |
| nr_areas: number of debug areas |
| buf_size: size of data area in each debug entry |
| |
| Return Value: Handle for generated debug area |
| NULL if register failed |
| |
| Description: Allocates memory for a debug log |
| Must not be called within an interrupt handler |
| |
| --------------------------------------------------------------------------- |
| void debug_unregister (debug_info_t * id); |
| |
| Parameter: id: handle for debug log |
| |
| Return Value: none |
| |
| Description: frees memory for a debug log |
| Must not be called within an interrupt handler |
| |
| --------------------------------------------------------------------------- |
| void debug_set_level (debug_info_t * id, int new_level); |
| |
| Parameter: id: handle for debug log |
| new_level: new debug level |
| |
| Return Value: none |
| |
| Description: Sets new actual debug level if new_level is valid. |
| |
| --------------------------------------------------------------------------- |
| void debug_stop_all(void); |
| |
| Parameter: none |
| |
| Return Value: none |
| |
| Description: stops the debug feature if stopping is allowed. Currently |
| used in case of a kernel oops. |
| |
| --------------------------------------------------------------------------- |
| debug_entry_t* debug_event (debug_info_t* id, int level, void* data, |
| int length); |
| |
| Parameter: id: handle for debug log |
| level: debug level |
| data: pointer to data for debug entry |
| length: length of data in bytes |
| |
| Return Value: Address of written debug entry |
| |
| Description: writes debug entry to active debug area (if level <= actual |
| debug level) |
| |
| --------------------------------------------------------------------------- |
| debug_entry_t* debug_int_event (debug_info_t * id, int level, |
| unsigned int data); |
| debug_entry_t* debug_long_event(debug_info_t * id, int level, |
| unsigned long data); |
| |
| Parameter: id: handle for debug log |
| level: debug level |
| data: integer value for debug entry |
| |
| Return Value: Address of written debug entry |
| |
| Description: writes debug entry to active debug area (if level <= actual |
| debug level) |
| |
| --------------------------------------------------------------------------- |
| debug_entry_t* debug_text_event (debug_info_t * id, int level, |
| const char* data); |
| |
| Parameter: id: handle for debug log |
| level: debug level |
| data: string for debug entry |
| |
| Return Value: Address of written debug entry |
| |
| Description: writes debug entry in ascii format to active debug area |
| (if level <= actual debug level) |
| |
| --------------------------------------------------------------------------- |
| debug_entry_t* debug_sprintf_event (debug_info_t * id, int level, |
| char* string,...); |
| |
| Parameter: id: handle for debug log |
| level: debug level |
| string: format string for debug entry |
| ...: varargs used as in sprintf() |
| |
| Return Value: Address of written debug entry |
| |
| Description: writes debug entry with format string and varargs (longs) to |
| active debug area (if level $<=$ actual debug level). |
| floats and long long datatypes cannot be used as varargs. |
| |
| --------------------------------------------------------------------------- |
| |
| debug_entry_t* debug_exception (debug_info_t* id, int level, void* data, |
| int length); |
| |
| Parameter: id: handle for debug log |
| level: debug level |
| data: pointer to data for debug entry |
| length: length of data in bytes |
| |
| Return Value: Address of written debug entry |
| |
| Description: writes debug entry to active debug area (if level <= actual |
| debug level) and switches to next debug area |
| |
| --------------------------------------------------------------------------- |
| debug_entry_t* debug_int_exception (debug_info_t * id, int level, |
| unsigned int data); |
| debug_entry_t* debug_long_exception(debug_info_t * id, int level, |
| unsigned long data); |
| |
| Parameter: id: handle for debug log |
| level: debug level |
| data: integer value for debug entry |
| |
| Return Value: Address of written debug entry |
| |
| Description: writes debug entry to active debug area (if level <= actual |
| debug level) and switches to next debug area |
| |
| --------------------------------------------------------------------------- |
| debug_entry_t* debug_text_exception (debug_info_t * id, int level, |
| const char* data); |
| |
| Parameter: id: handle for debug log |
| level: debug level |
| data: string for debug entry |
| |
| Return Value: Address of written debug entry |
| |
| Description: writes debug entry in ascii format to active debug area |
| (if level <= actual debug level) and switches to next debug |
| area |
| |
| --------------------------------------------------------------------------- |
| debug_entry_t* debug_sprintf_exception (debug_info_t * id, int level, |
| char* string,...); |
| |
| Parameter: id: handle for debug log |
| level: debug level |
| string: format string for debug entry |
| ...: varargs used as in sprintf() |
| |
| Return Value: Address of written debug entry |
| |
| Description: writes debug entry with format string and varargs (longs) to |
| active debug area (if level $<=$ actual debug level) and |
| switches to next debug area. |
| floats and long long datatypes cannot be used as varargs. |
| |
| --------------------------------------------------------------------------- |
| |
| int debug_register_view (debug_info_t * id, struct debug_view *view); |
| |
| Parameter: id: handle for debug log |
| view: pointer to debug view struct |
| |
| Return Value: 0 : ok |
| < 0: Error |
| |
| Description: registers new debug view and creates debugfs dir entry |
| |
| --------------------------------------------------------------------------- |
| int debug_unregister_view (debug_info_t * id, struct debug_view *view); |
| |
| Parameter: id: handle for debug log |
| view: pointer to debug view struct |
| |
| Return Value: 0 : ok |
| < 0: Error |
| |
| Description: unregisters debug view and removes debugfs dir entry |
| |
| |
| |
| Predefined views: |
| ----------------- |
| |
| extern struct debug_view debug_hex_ascii_view; |
| extern struct debug_view debug_raw_view; |
| extern struct debug_view debug_sprintf_view; |
| |
| Examples |
| -------- |
| |
| /* |
| * hex_ascii- + raw-view Example |
| */ |
| |
| #include <linux/init.h> |
| #include <asm/debug.h> |
| |
| static debug_info_t* debug_info; |
| |
| static int init(void) |
| { |
| /* register 4 debug areas with one page each and 4 byte data field */ |
| |
| debug_info = debug_register ("test", 1, 4, 4 ); |
| debug_register_view(debug_info,&debug_hex_ascii_view); |
| debug_register_view(debug_info,&debug_raw_view); |
| |
| debug_text_event(debug_info, 4 , "one "); |
| debug_int_exception(debug_info, 4, 4711); |
| debug_event(debug_info, 3, &debug_info, 4); |
| |
| return 0; |
| } |
| |
| static void cleanup(void) |
| { |
| debug_unregister (debug_info); |
| } |
| |
| module_init(init); |
| module_exit(cleanup); |
| |
| --------------------------------------------------------------------------- |
| |
| /* |
| * sprintf-view Example |
| */ |
| |
| #include <linux/init.h> |
| #include <asm/debug.h> |
| |
| static debug_info_t* debug_info; |
| |
| static int init(void) |
| { |
| /* register 4 debug areas with one page each and data field for */ |
| /* format string pointer + 2 varargs (= 3 * sizeof(long)) */ |
| |
| debug_info = debug_register ("test", 1, 4, sizeof(long) * 3); |
| debug_register_view(debug_info,&debug_sprintf_view); |
| |
| debug_sprintf_event(debug_info, 2 , "first event in %s:%i\n",__FILE__,__LINE__); |
| debug_sprintf_exception(debug_info, 1, "pointer to debug info: %p\n",&debug_info); |
| |
| return 0; |
| } |
| |
| static void cleanup(void) |
| { |
| debug_unregister (debug_info); |
| } |
| |
| module_init(init); |
| module_exit(cleanup); |
| |
| |
| |
| Debugfs Interface |
| ---------------- |
| Views to the debug logs can be investigated through reading the corresponding |
| debugfs-files: |
| |
| Example: |
| |
| > ls /sys/kernel/debug/s390dbf/dasd |
| flush hex_ascii level pages raw |
| > cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort +1 |
| 00 00974733272:680099 2 - 02 0006ad7e 07 ea 4a 90 | .... |
| 00 00974733272:682210 2 - 02 0006ade6 46 52 45 45 | FREE |
| 00 00974733272:682213 2 - 02 0006adf6 07 ea 4a 90 | .... |
| 00 00974733272:682281 1 * 02 0006ab08 41 4c 4c 43 | EXCP |
| 01 00974733272:682284 2 - 02 0006ab16 45 43 4b 44 | ECKD |
| 01 00974733272:682287 2 - 02 0006ab28 00 00 00 04 | .... |
| 01 00974733272:682289 2 - 02 0006ab3e 00 00 00 20 | ... |
| 01 00974733272:682297 2 - 02 0006ad7e 07 ea 4a 90 | .... |
| 01 00974733272:684384 2 - 00 0006ade6 46 52 45 45 | FREE |
| 01 00974733272:684388 2 - 00 0006adf6 07 ea 4a 90 | .... |
| |
| See section about predefined views for explanation of the above output! |
| |
| Changing the debug level |
| ------------------------ |
| |
| Example: |
| |
| |
| > cat /sys/kernel/debug/s390dbf/dasd/level |
| 3 |
| > echo "5" > /sys/kernel/debug/s390dbf/dasd/level |
| > cat /sys/kernel/debug/s390dbf/dasd/level |
| 5 |
| |
| Flushing debug areas |
| -------------------- |
| Debug areas can be flushed with piping the number of the desired |
| area (0...n) to the debugfs file "flush". When using "-" all debug areas |
| are flushed. |
| |
| Examples: |
| |
| 1. Flush debug area 0: |
| > echo "0" > /sys/kernel/debug/s390dbf/dasd/flush |
| |
| 2. Flush all debug areas: |
| > echo "-" > /sys/kernel/debug/s390dbf/dasd/flush |
| |
| Changing the size of debug areas |
| ------------------------------------ |
| It is possible the change the size of debug areas through piping |
| the number of pages to the debugfs file "pages". The resize request will |
| also flush the debug areas. |
| |
| Example: |
| |
| Define 4 pages for the debug areas of debug feature "dasd": |
| > echo "4" > /sys/kernel/debug/s390dbf/dasd/pages |
| |
| Stooping the debug feature |
| -------------------------- |
| Example: |
| |
| 1. Check if stopping is allowed |
| > cat /proc/sys/s390dbf/debug_stoppable |
| 2. Stop debug feature |
| > echo 0 > /proc/sys/s390dbf/debug_active |
| |
| lcrash Interface |
| ---------------- |
| It is planned that the dump analysis tool lcrash gets an additional command |
| 's390dbf' to display all the debug logs. With this tool it will be possible |
| to investigate the debug logs on a live system and with a memory dump after |
| a system crash. |
| |
| Investigating raw memory |
| ------------------------ |
| One last possibility to investigate the debug logs at a live |
| system and after a system crash is to look at the raw memory |
| under VM or at the Service Element. |
| It is possible to find the anker of the debug-logs through |
| the 'debug_area_first' symbol in the System map. Then one has |
| to follow the correct pointers of the data-structures defined |
| in debug.h and find the debug-areas in memory. |
| Normally modules which use the debug feature will also have |
| a global variable with the pointer to the debug-logs. Following |
| this pointer it will also be possible to find the debug logs in |
| memory. |
| |
| For this method it is recommended to use '16 * x + 4' byte (x = 0..n) |
| for the length of the data field in debug_register() in |
| order to see the debug entries well formatted. |
| |
| |
| Predefined Views |
| ---------------- |
| |
| There are three predefined views: hex_ascii, raw and sprintf. |
| The hex_ascii view shows the data field in hex and ascii representation |
| (e.g. '45 43 4b 44 | ECKD'). |
| The raw view returns a bytestream as the debug areas are stored in memory. |
| |
| The sprintf view formats the debug entries in the same way as the sprintf |
| function would do. The sprintf event/exception functions write to the |
| debug entry a pointer to the format string (size = sizeof(long)) |
| and for each vararg a long value. So e.g. for a debug entry with a format |
| string plus two varargs one would need to allocate a (3 * sizeof(long)) |
| byte data area in the debug_register() function. |
| |
| |
| NOTE: If using the sprintf view do NOT use other event/exception functions |
| than the sprintf-event and -exception functions. |
| |
| The format of the hex_ascii and sprintf view is as follows: |
| - Number of area |
| - Timestamp (formatted as seconds and microseconds since 00:00:00 Coordinated |
| Universal Time (UTC), January 1, 1970) |
| - level of debug entry |
| - Exception flag (* = Exception) |
| - Cpu-Number of calling task |
| - Return Address to caller |
| - data field |
| |
| The format of the raw view is: |
| - Header as described in debug.h |
| - datafield |
| |
| A typical line of the hex_ascii view will look like the following (first line |
| is only for explanation and will not be displayed when 'cating' the view): |
| |
| area time level exception cpu caller data (hex + ascii) |
| -------------------------------------------------------------------------- |
| 00 00964419409:440690 1 - 00 88023fe |
| |
| |
| Defining views |
| -------------- |
| |
| Views are specified with the 'debug_view' structure. There are defined |
| callback functions which are used for reading and writing the debugfs files: |
| |
| struct debug_view { |
| char name[DEBUG_MAX_PROCF_LEN]; |
| debug_prolog_proc_t* prolog_proc; |
| debug_header_proc_t* header_proc; |
| debug_format_proc_t* format_proc; |
| debug_input_proc_t* input_proc; |
| void* private_data; |
| }; |
| |
| where |
| |
| typedef int (debug_header_proc_t) (debug_info_t* id, |
| struct debug_view* view, |
| int area, |
| debug_entry_t* entry, |
| char* out_buf); |
| |
| typedef int (debug_format_proc_t) (debug_info_t* id, |
| struct debug_view* view, char* out_buf, |
| const char* in_buf); |
| typedef int (debug_prolog_proc_t) (debug_info_t* id, |
| struct debug_view* view, |
| char* out_buf); |
| typedef int (debug_input_proc_t) (debug_info_t* id, |
| struct debug_view* view, |
| struct file* file, const char* user_buf, |
| size_t in_buf_size, loff_t* offset); |
| |
| |
| The "private_data" member can be used as pointer to view specific data. |
| It is not used by the debug feature itself. |
| |
| The output when reading a debugfs file is structured like this: |
| |
| "prolog_proc output" |
| |
| "header_proc output 1" "format_proc output 1" |
| "header_proc output 2" "format_proc output 2" |
| "header_proc output 3" "format_proc output 3" |
| ... |
| |
| When a view is read from the debugfs, the Debug Feature calls the |
| 'prolog_proc' once for writing the prolog. |
| Then 'header_proc' and 'format_proc' are called for each |
| existing debug entry. |
| |
| The input_proc can be used to implement functionality when it is written to |
| the view (e.g. like with 'echo "0" > /sys/kernel/debug/s390dbf/dasd/level). |
| |
| For header_proc there can be used the default function |
| debug_dflt_header_fn() which is defined in in debug.h. |
| and which produces the same header output as the predefined views. |
| E.g: |
| 00 00964419409:440761 2 - 00 88023ec |
| |
| In order to see how to use the callback functions check the implementation |
| of the default views! |
| |
| Example |
| |
| #include <asm/debug.h> |
| |
| #define UNKNOWNSTR "data: %08x" |
| |
| const char* messages[] = |
| {"This error...........\n", |
| "That error...........\n", |
| "Problem..............\n", |
| "Something went wrong.\n", |
| "Everything ok........\n", |
| NULL |
| }; |
| |
| static int debug_test_format_fn( |
| debug_info_t * id, struct debug_view *view, |
| char *out_buf, const char *in_buf |
| ) |
| { |
| int i, rc = 0; |
| |
| if(id->buf_size >= 4) { |
| int msg_nr = *((int*)in_buf); |
| if(msg_nr < sizeof(messages)/sizeof(char*) - 1) |
| rc += sprintf(out_buf, "%s", messages[msg_nr]); |
| else |
| rc += sprintf(out_buf, UNKNOWNSTR, msg_nr); |
| } |
| out: |
| return rc; |
| } |
| |
| struct debug_view debug_test_view = { |
| "myview", /* name of view */ |
| NULL, /* no prolog */ |
| &debug_dflt_header_fn, /* default header for each entry */ |
| &debug_test_format_fn, /* our own format function */ |
| NULL, /* no input function */ |
| NULL /* no private data */ |
| }; |
| |
| ===== |
| test: |
| ===== |
| debug_info_t *debug_info; |
| ... |
| debug_info = debug_register ("test", 0, 4, 4 )); |
| debug_register_view(debug_info, &debug_test_view); |
| for(i = 0; i < 10; i ++) debug_int_event(debug_info, 1, i); |
| |
| > cat /sys/kernel/debug/s390dbf/test/myview |
| 00 00964419734:611402 1 - 00 88042ca This error........... |
| 00 00964419734:611405 1 - 00 88042ca That error........... |
| 00 00964419734:611408 1 - 00 88042ca Problem.............. |
| 00 00964419734:611411 1 - 00 88042ca Something went wrong. |
| 00 00964419734:611414 1 - 00 88042ca Everything ok........ |
| 00 00964419734:611417 1 - 00 88042ca data: 00000005 |
| 00 00964419734:611419 1 - 00 88042ca data: 00000006 |
| 00 00964419734:611422 1 - 00 88042ca data: 00000007 |
| 00 00964419734:611425 1 - 00 88042ca data: 00000008 |
| 00 00964419734:611428 1 - 00 88042ca data: 00000009 |