arch/blackfin/mach-bf533/head.S - LeafOS-Devices/android_kernel_samsung_universal7904 - Gitiles

 /*
  * File:         arch/blackfin/mach-bf533/head.S
  * Based on:
  * Author:       Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
  *
  * Created:      1998
  * Description:  bf533 startup file
  *
  * Modified:
  *               Copyright 2004-2006 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, see the file COPYING, or write
  * to the Free Software Foundation, Inc.,
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */

 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 #if CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach/mem_init.h>
 #endif
 #if CONFIG_DEBUG_KERNEL_START
 #include <asm/mach-common/def_LPBlackfin.h>
 #endif

 .global __rambase
 .global __ramstart
 .global __ramend
 .extern ___bss_stop
 .extern ___bss_start
 .extern _bf53x_relocate_l1_mem

 #define INITIAL_STACK	0xFFB01000

 __INIT

 ENTRY(__start)
 	/* R0: argument of command line string, passed from uboot, save it */
 	R7 = R0;
 	/* Set the SYSCFG register:
 	 * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
 	 */
 	R0 = 0x36;
 	SYSCFG = R0;
 	R0 = 0;

 	/* Clear Out All the data and pointer Registers */
 	R1 = R0;
 	R2 = R0;
 	R3 = R0;
 	R4 = R0;
 	R5 = R0;
 	R6 = R0;

 	P0 = R0;
 	P1 = R0;
 	P2 = R0;
 	P3 = R0;
 	P4 = R0;
 	P5 = R0;

 	LC0 = r0;
 	LC1 = r0;
 	L0 = r0;
 	L1 = r0;
 	L2 = r0;
 	L3 = r0;

 	/* Clear Out All the DAG Registers */
 	B0 = r0;
 	B1 = r0;
 	B2 = r0;
 	B3 = r0;

 	I0 = r0;
 	I1 = r0;
 	I2 = r0;
 	I3 = r0;

 	M0 = r0;
 	M1 = r0;
 	M2 = r0;
 	M3 = r0;

 	trace_buffer_start(p0,r0);
 	P0 = R1;
 	R0 = R1;

 #if CONFIG_DEBUG_KERNEL_START

 /*
  * Set up a temporary Event Vector Table, so if something bad happens before
  * the kernel is fully started, it doesn't vector off into the bootloaders
  * table
  */
 	P0.l = lo(EVT2);
 	P0.h = hi(EVT2);
 	P1.l = lo(EVT15);
 	P1.h = hi(EVT15);
 	P2.l = debug_kernel_start_trap;
 	P2.h = debug_kernel_start_trap;

 	RTS = P2;
 	RTI = P2;
 	RTX = P2;
 	RTN = P2;
 	RTE = P2;

 .Lfill_temp_vector_table:
 	[P0++] = P2;	/* Core Event Vector Table */
 	CC = P0 == P1;
 	if !CC JUMP .Lfill_temp_vector_table
 	P0 = r0;
 	P1 = r0;
 	P2 = r0;

 #endif

 	p0.h = hi(FIO_MASKA_C);
 	p0.l = lo(FIO_MASKA_C);
 	r0 = 0xFFFF(Z);
 	w[p0] = r0.L;	/* Disable all interrupts */
 	ssync;

 	p0.h = hi(FIO_MASKB_C);
 	p0.l = lo(FIO_MASKB_C);
 	r0 = 0xFFFF(Z);
 	w[p0] = r0.L;	/* Disable all interrupts */
 	ssync;

 	/* Turn off the icache */
 	p0.l = (IMEM_CONTROL & 0xFFFF);
 	p0.h = (IMEM_CONTROL >> 16);
 	R1 = [p0];
 	R0 = ~ENICPLB;
 	R0 = R0 & R1;

 	/* Anomaly 05000125 */
 #ifdef ANOMALY_05000125
 	CLI R2;
 	SSYNC;
 #endif
 	[p0] = R0;
 	SSYNC;
 #ifdef ANOMALY_05000125
 	STI R2;
 #endif

 	/* Turn off the dcache */
 	p0.l = (DMEM_CONTROL & 0xFFFF);
 	p0.h = (DMEM_CONTROL >> 16);
 	R1 = [p0];
 	R0 = ~ENDCPLB;
 	R0 = R0 & R1;

 	/* Anomaly 05000125 */
 #ifdef ANOMALY_05000125
 	CLI R2;
 	SSYNC;
 #endif
 	[p0] = R0;
 	SSYNC;
 #ifdef ANOMALY_05000125
 	STI R2;
 #endif

 	/* Initialise UART - when booting from u-boot, the UART is not disabled
 	 * so if we dont initalize here, our serial console gets hosed */
 	p0.h = hi(UART_LCR);
 	p0.l = lo(UART_LCR);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;	/* To enable DLL writes */
 	ssync;

 	p0.h = hi(UART_DLL);
 	p0.l = lo(UART_DLL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;
 	ssync;

 	p0.h = hi(UART_DLH);
 	p0.l = lo(UART_DLH);
 	r0 = 0x00(Z);
 	w[p0] = r0.L;
 	ssync;

 	p0.h = hi(UART_GCTL);
 	p0.l = lo(UART_GCTL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;	/* To enable UART clock */
 	ssync;

 	/* Initialize stack pointer */
 	sp.l = lo(INITIAL_STACK);
 	sp.h = hi(INITIAL_STACK);
 	fp = sp;
 	usp = sp;

 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
 #if CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif

 	/* Code for initializing Async memory banks */

 	p2.h = hi(EBIU_AMBCTL1);
 	p2.l = lo(EBIU_AMBCTL1);
 	r0.h = hi(AMBCTL1VAL);
 	r0.l = lo(AMBCTL1VAL);
 	[p2] = r0;
 	ssync;

 	p2.h = hi(EBIU_AMBCTL0);
 	p2.l = lo(EBIU_AMBCTL0);
 	r0.h = hi(AMBCTL0VAL);
 	r0.l = lo(AMBCTL0VAL);
 	[p2] = r0;
 	ssync;

 	p2.h = hi(EBIU_AMGCTL);
 	p2.l = lo(EBIU_AMGCTL);
 	r0 = AMGCTLVAL;
 	w[p2] = r0;
 	ssync;

 	/* This section keeps the processor in supervisor mode
 	 * during kernel boot.  Switches to user mode at end of boot.
 	 * See page 3-9 of Hardware Reference manual for documentation.
 	 */

 	/* EVT15 = _real_start */

 	p0.l = lo(EVT15);
 	p0.h = hi(EVT15);
 	p1.l = _real_start;
 	p1.h = _real_start;
 	[p0] = p1;
 	csync;

 	p0.l = lo(IMASK);
 	p0.h = hi(IMASK);
 	p1.l = IMASK_IVG15;
 	p1.h = 0x0;
 	[p0] = p1;
 	csync;

 	raise 15;
 	p0.l = .LWAIT_HERE;
 	p0.h = .LWAIT_HERE;
 	reti = p0;
 #if defined(ANOMALY_05000281)
 	nop; nop; nop;
 #endif
 	rti;

 .LWAIT_HERE:
 	jump .LWAIT_HERE;
 ENDPROC(__start)

 ENTRY(_real_start)
 	[ -- sp ] = reti;
 	p0.l = lo(WDOG_CTL);
 	p0.h = hi(WDOG_CTL);
 	r0 = 0xAD6(z);
 	w[p0] = r0;	/* watchdog off for now */
 	ssync;

 	/* Code update for BSS size == 0
 	 * Zero out the bss region.
 	 */

 	p1.l = ___bss_start;
 	p1.h = ___bss_start;
 	p2.l = ___bss_stop;
 	p2.h = ___bss_stop;
 	r0 = 0;
 	p2 -= p1;
 	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
 .L_clear_bss:
 	B[p1++] = r0;

 	/* In case there is a NULL pointer reference
 	 * Zero out region before stext
 	 */

 	p1.l = 0x0;
 	p1.h = 0x0;
 	r0.l = __stext;
 	r0.h = __stext;
 	r0 = r0 >> 1;
 	p2 = r0;
 	r0 = 0;
 	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
 .L_clear_zero:
 	W[p1++] = r0;

 	/* pass the uboot arguments to the global value command line */
 	R0 = R7;
 	call _cmdline_init;

 	p1.l = __rambase;
 	p1.h = __rambase;
 	r0.l = __sdata;
 	r0.h = __sdata;
 	[p1] = r0;

 	p1.l = __ramstart;
 	p1.h = __ramstart;
 	p3.l = ___bss_stop;
 	p3.h = ___bss_stop;

 	r1 = p3;
 	[p1] = r1;

 	/*
 	 * load the current thread pointer and stack
 	 */
 	r1.l = _init_thread_union;
 	r1.h = _init_thread_union;

 	r2.l = 0x2000;
 	r2.h = 0x0000;
 	r1 = r1 + r2;
 	sp = r1;
 	usp = sp;
 	fp = sp;
 	jump.l _start_kernel;
 ENDPROC(_real_start)

 __FINIT

 .section .l1.text
 #if CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 	p0.h = hi(SIC_IWR);
 	p0.l = lo(SIC_IWR);
 	r0.l = 0x1;
 	r0.h = 0x0;
 	[p0] = r0;
 	SSYNC;

 	/*
 	 *  Set PLL_CTL
 	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
 	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
 	 *   - [7]     = output delay (add 200ps of delay to mem signals)
 	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
 	 *   - [5]     = PDWN      : 1=All Clocks off
 	 *   - [3]     = STOPCK    : 1=Core Clock off
 	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
 	 *   - [0]     = DF        : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
 	 *   all other bits set to zero
 	 */

 	p0.h = hi(PLL_LOCKCNT);
 	p0.l = lo(PLL_LOCKCNT);
 	r0 = 0x300(Z);
 	w[p0] = r0.l;
 	ssync;

 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
 	BITSET (R0, 24);
 	[P2] = R0;
 	SSYNC;

 	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
 	r0 = r0 << 9;                    /* Shift it over,                  */
 	r1 = CLKIN_HALF;                 /* Do we need to divide CLKIN by 2?*/
 	r0 = r1 | r0;
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */

 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
 	cli r2;                          /* Disable interrupts              */
 	ssync;
 	w[p0] = r0.l;                    /* Set the value                   */
 	idle;                            /* Wait for the PLL to stablize    */
 	sti r2;                          /* Enable interrupts               */

 .Lcheck_again:
 	p0.h = hi(PLL_STAT);
 	p0.l = lo(PLL_STAT);
 	R0 = W[P0](Z);
 	CC = BITTST(R0,5);
 	if ! CC jump .Lcheck_again;

 	/* Configure SCLK & CCLK Dividers */
 	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
 	p0.h = hi(PLL_DIV);
 	p0.l = lo(PLL_DIV);
 	w[p0] = r0.l;
 	ssync;

 	p0.l = lo(EBIU_SDRRC);
 	p0.h = hi(EBIU_SDRRC);
 	r0 = mem_SDRRC;
 	w[p0] = r0.l;
 	ssync;

 	p0.l = (EBIU_SDBCTL & 0xFFFF);
 	p0.h = (EBIU_SDBCTL >> 16);     /* SDRAM Memory Bank Control Register */
 	r0 = mem_SDBCTL;
 	w[p0] = r0.l;
 	ssync;

 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
 	BITCLR (R0, 24);
 	p0.h = hi(EBIU_SDSTAT);
 	p0.l = lo(EBIU_SDSTAT);
 	r2.l = w[p0];
 	cc = bittst(r2,3);
 	if !cc jump .Lskip;
 	NOP;
 	BITSET (R0, 23);
 .Lskip:
 	[P2] = R0;
 	SSYNC;

 	R0.L = lo(mem_SDGCTL);
 	R0.H = hi(mem_SDGCTL);
 	R1 = [p2];
 	R1 = R1 | R0;
 	[P2] = R1;
 	SSYNC;

 	p0.h = hi(SIC_IWR);
 	p0.l = lo(SIC_IWR);
 	r0.l = lo(IWR_ENABLE_ALL);
 	r0.h = hi(IWR_ENABLE_ALL);
 	[p0] = r0;
 	SSYNC;

 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */

 ENTRY(_bfin_reset)
 	/* No more interrupts to be handled*/
 	CLI R6;
 	SSYNC;

 #if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
 	p0.h = hi(FIO_INEN);
 	p0.l = lo(FIO_INEN);
 	r0.l = ~(1 << CONFIG_ENET_FLASH_PIN);
 	w[p0] = r0.l;

 	p0.h = hi(FIO_DIR);
 	p0.l = lo(FIO_DIR);
 	r0.l = (1 << CONFIG_ENET_FLASH_PIN);
 	w[p0] = r0.l;

 	p0.h = hi(FIO_FLAG_C);
 	p0.l = lo(FIO_FLAG_C);
 	r0.l = (1 << CONFIG_ENET_FLASH_PIN);
 	w[p0] = r0.l;
 #endif

 	/* Clear the IMASK register */
 	p0.h = hi(IMASK);
 	p0.l = lo(IMASK);
 	r0 = 0x0;
 	[p0] = r0;

 	/* Clear the ILAT register */
 	p0.h = hi(ILAT);
 	p0.l = lo(ILAT);
 	r0 = [p0];
 	[p0] = r0;
 	SSYNC;

 	/* make sure SYSCR is set to use BMODE */
 	P0.h = hi(SYSCR);
 	P0.l = lo(SYSCR);
 	R0.l = 0x0;
 	W[P0] = R0.l;
 	SSYNC;

 	/* issue a system soft reset */
 	P1.h = hi(SWRST);
 	P1.l = lo(SWRST);
 	R1.l = 0x0007;
 	W[P1] = R1;
 	SSYNC;

 	/* clear system soft reset */
 	R0.l = 0x0000;
 	W[P0] = R0;
 	SSYNC;

 	/* issue core reset */
 	raise 1;

 	RTS;
 ENDPROC(_bfin_reset)

 #if CONFIG_DEBUG_KERNEL_START
 debug_kernel_start_trap:
 	/* Set up a temp stack in L1 - SDRAM might not be working  */
 	P0.L = lo(L1_DATA_A_START + 0x100);
 	P0.H = hi(L1_DATA_A_START + 0x100);
 	SP = P0;

 	/* Make sure the Clocks are the way I think they should be */
 	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
 	r0 = r0 << 9;                    /* Shift it over,                  */
 	r1 = CLKIN_HALF;                 /* Do we need to divide CLKIN by 2?*/
 	r0 = r1 | r0;
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */

 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
 	cli r2;                          /* Disable interrupts              */
 	ssync;
 	w[p0] = r0.l;                    /* Set the value                   */
 	idle;                            /* Wait for the PLL to stablize    */
 	sti r2;                          /* Enable interrupts               */

 .Lcheck_again1:
 	p0.h = hi(PLL_STAT);
 	p0.l = lo(PLL_STAT);
 	R0 = W[P0](Z);
 	CC = BITTST(R0,5);
 	if ! CC jump .Lcheck_again1;

 	/* Configure SCLK & CCLK Dividers */
 	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
 	p0.h = hi(PLL_DIV);
 	p0.l = lo(PLL_DIV);
 	w[p0] = r0.l;
 	ssync;

 	/* Make sure UART is enabled - you can never be sure */

 /*
  * Setup for console. Argument comes from the menuconfig
  */

 #ifdef CONFIG_BAUD_9600
 #define CONSOLE_BAUD_RATE       9600
 #elif CONFIG_BAUD_19200
 #define CONSOLE_BAUD_RATE       19200
 #elif CONFIG_BAUD_38400
 #define CONSOLE_BAUD_RATE       38400
 #elif CONFIG_BAUD_57600
 #define CONSOLE_BAUD_RATE       57600
 #elif CONFIG_BAUD_115200
 #define CONSOLE_BAUD_RATE       115200
 #endif

 	p0.h = hi(UART_GCTL);
 	p0.l = lo(UART_GCTL);
 	r0 = 0x00(Z);
 	w[p0] = r0.L;   /* To Turn off UART clocks */
 	ssync;

 	p0.h = hi(UART_LCR);
 	p0.l = lo(UART_LCR);
 	r0 = 0x83(Z);
 	w[p0] = r0.L;   /* To enable DLL writes */
 	ssync;

 	R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));

 	p0.h = hi(UART_DLL);
 	p0.l = lo(UART_DLL);
 	r0 = 0xFF(Z);
 	r0 = R1 & R0;
 	w[p0] = r0.L;
 	ssync;

 	p0.h = hi(UART_DLH);
 	p0.l = lo(UART_DLH);
 	r1 >>= 8 ;
 	w[p0] = r1.L;
 	ssync;

 	p0.h = hi(UART_GCTL);
 	p0.l = lo(UART_GCTL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;   /* To enable UART clock */
 	ssync;

 	p0.h = hi(UART_LCR);
 	p0.l = lo(UART_LCR);
 	r0 = 0x03(Z);
 	w[p0] = r0.L;   /* To Turn on UART */
 	ssync;

 	p0.h = hi(UART_GCTL);
 	p0.l = lo(UART_GCTL);
 	r0 = 0x01(Z);
 	w[p0] = r0.L;   /* To Turn on UART Clocks */
 	ssync;

 	P0.h = hi(UART_THR);
 	P0.l = lo(UART_THR);
 	P1.h = hi(UART_LSR);
 	P1.l = lo(UART_LSR);

 	R0.L = 'K';
 	call .Lwait_char;
 	R0.L='e';
 	call .Lwait_char;
 	R0.L='r';
 	call .Lwait_char;
 	R0.L='n'
 	call .Lwait_char;
 	R0.L='e'
 	call .Lwait_char;
 	R0.L='l';
 	call .Lwait_char;
 	R0.L=' ';
 	call .Lwait_char;
 	R0.L='c';
 	call .Lwait_char;
 	R0.L='r';
 	call .Lwait_char;
 	R0.L='a';
 	call .Lwait_char;
 	R0.L='s';
 	call .Lwait_char;
 	R0.L='h';
 	call .Lwait_char;
 	R0.L='\r';
 	call .Lwait_char;
 	R0.L='\n';
 	call .Lwait_char;

 	R0.L='S';
 	call .Lwait_char;
 	R0.L='E';
 	call .Lwait_char;
 	R0.L='Q'
 	call .Lwait_char;
 	R0.L='S'
 	call .Lwait_char;
 	R0.L='T';
 	call .Lwait_char;
 	R0.L='A';
 	call .Lwait_char;
 	R0.L='T';
 	call .Lwait_char;
 	R0.L='=';
 	call .Lwait_char;
 	R2 = SEQSTAT;
 	call .Ldump_reg;

 	R0.L=' ';
 	call .Lwait_char;
 	R0.L='R';
 	call .Lwait_char;
 	R0.L='E'
 	call .Lwait_char;
 	R0.L='T'
 	call .Lwait_char;
 	R0.L='X';
 	call .Lwait_char;
 	R0.L='=';
 	call .Lwait_char;
 	R2 = RETX;
 	call .Ldump_reg;

 	R0.L='\r';
 	call .Lwait_char;
 	R0.L='\n';
 	call .Lwait_char;

 .Ldebug_kernel_start_trap_done:
 	JUMP    .Ldebug_kernel_start_trap_done;
 .Ldump_reg:
 	R3 = 32;
 	R4 = 0x0F;
 	R5 = ':';  /* one past 9 */

 .Ldump_reg2:
 	R0 = R2;
 	R3 += -4;
 	R0 >>>= R3;
 	R0 = R0 & R4;
 	R0 += 0x30;
 	CC = R0 <= R5;
 	if CC JUMP .Ldump_reg1;
 	R0 += 7;

 .Ldump_reg1:
 	R1.l = W[P1];
 	CC = BITTST(R1, 5);
 	if !CC JUMP .Ldump_reg1;
 	W[P0] = r0;

 	CC = R3 == 0;
 	if !CC JUMP .Ldump_reg2
 	RTS;

 .Lwait_char:
 	R1.l = W[P1];
 	CC = BITTST(R1, 5);
 	if !CC JUMP .Lwait_char;
 	W[P0] = r0;
 	RTS;

 #endif  /* CONFIG_DEBUG_KERNEL_START  */

 .data

 /*
  * Set up the usable of RAM stuff. Size of RAM is determined then
  * an initial stack set up at the end.
  */

 .align 4
 __rambase:
 .long   0
 __ramstart:
 .long   0
 __ramend:
 .long   0
	/*
	* File: arch/blackfin/mach-bf533/head.S
	* Based on:
	* Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
	*
	* Created: 1998
	* Description: bf533 startup file
	*
	* Modified:
	* Copyright 2004-2006 Analog Devices Inc.
	*
	* Bugs: Enter bugs at http://blackfin.uclinux.org/
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, see the file COPYING, or write
	* to the Free Software Foundation, Inc.,
	* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	*/

	#include <linux/linkage.h>
	#include <linux/init.h>
	#include <asm/blackfin.h>
	#include <asm/trace.h>
	#if CONFIG_BFIN_KERNEL_CLOCK
	#include <asm/mach/mem_init.h>
	#endif
	#if CONFIG_DEBUG_KERNEL_START
	#include <asm/mach-common/def_LPBlackfin.h>
	#endif

	.global __rambase
	.global __ramstart
	.global __ramend
	.extern ___bss_stop
	.extern ___bss_start
	.extern _bf53x_relocate_l1_mem

	#define INITIAL_STACK 0xFFB01000

	__INIT

	ENTRY(__start)
	/* R0: argument of command line string, passed from uboot, save it */
	R7 = R0;
	/* Set the SYSCFG register:
	* Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
	*/
	R0 = 0x36;
	SYSCFG = R0;
	R0 = 0;

	/* Clear Out All the data and pointer Registers */
	R1 = R0;
	R2 = R0;
	R3 = R0;
	R4 = R0;
	R5 = R0;
	R6 = R0;

	P0 = R0;
	P1 = R0;
	P2 = R0;
	P3 = R0;
	P4 = R0;
	P5 = R0;

	LC0 = r0;
	LC1 = r0;
	L0 = r0;
	L1 = r0;
	L2 = r0;
	L3 = r0;

	/* Clear Out All the DAG Registers */
	B0 = r0;
	B1 = r0;
	B2 = r0;
	B3 = r0;

	I0 = r0;
	I1 = r0;
	I2 = r0;
	I3 = r0;

	M0 = r0;
	M1 = r0;
	M2 = r0;
	M3 = r0;

	trace_buffer_start(p0,r0);
	P0 = R1;
	R0 = R1;

	#if CONFIG_DEBUG_KERNEL_START

	/*
	* Set up a temporary Event Vector Table, so if something bad happens before
	* the kernel is fully started, it doesn't vector off into the bootloaders
	* table
	*/
	P0.l = lo(EVT2);
	P0.h = hi(EVT2);
	P1.l = lo(EVT15);
	P1.h = hi(EVT15);
	P2.l = debug_kernel_start_trap;
	P2.h = debug_kernel_start_trap;

	RTS = P2;
	RTI = P2;
	RTX = P2;
	RTN = P2;
	RTE = P2;

	.Lfill_temp_vector_table:
	[P0++] = P2; /* Core Event Vector Table */
	CC = P0 == P1;
	if !CC JUMP .Lfill_temp_vector_table
	P0 = r0;
	P1 = r0;
	P2 = r0;

	#endif

	p0.h = hi(FIO_MASKA_C);
	p0.l = lo(FIO_MASKA_C);
	r0 = 0xFFFF(Z);
	w[p0] = r0.L; /* Disable all interrupts */
	ssync;

	p0.h = hi(FIO_MASKB_C);
	p0.l = lo(FIO_MASKB_C);
	r0 = 0xFFFF(Z);
	w[p0] = r0.L; /* Disable all interrupts */
	ssync;

	/* Turn off the icache */
	p0.l = (IMEM_CONTROL & 0xFFFF);
	p0.h = (IMEM_CONTROL >> 16);
	R1 = [p0];
	R0 = ~ENICPLB;
	R0 = R0 & R1;

	/* Anomaly 05000125 */
	#ifdef ANOMALY_05000125
	CLI R2;
	SSYNC;
	#endif
	[p0] = R0;
	SSYNC;
	#ifdef ANOMALY_05000125
	STI R2;
	#endif

	/* Turn off the dcache */
	p0.l = (DMEM_CONTROL & 0xFFFF);
	p0.h = (DMEM_CONTROL >> 16);
	R1 = [p0];
	R0 = ~ENDCPLB;
	R0 = R0 & R1;

	/* Anomaly 05000125 */
	#ifdef ANOMALY_05000125
	CLI R2;
	SSYNC;
	#endif
	[p0] = R0;
	SSYNC;
	#ifdef ANOMALY_05000125
	STI R2;
	#endif

	/* Initialise UART - when booting from u-boot, the UART is not disabled
	* so if we dont initalize here, our serial console gets hosed */
	p0.h = hi(UART_LCR);
	p0.l = lo(UART_LCR);
	r0 = 0x0(Z);
	w[p0] = r0.L; /* To enable DLL writes */
	ssync;

	p0.h = hi(UART_DLL);
	p0.l = lo(UART_DLL);
	r0 = 0x0(Z);
	w[p0] = r0.L;
	ssync;

	p0.h = hi(UART_DLH);
	p0.l = lo(UART_DLH);
	r0 = 0x00(Z);
	w[p0] = r0.L;
	ssync;

	p0.h = hi(UART_GCTL);
	p0.l = lo(UART_GCTL);
	r0 = 0x0(Z);
	w[p0] = r0.L; /* To enable UART clock */
	ssync;

	/* Initialize stack pointer */
	sp.l = lo(INITIAL_STACK);
	sp.h = hi(INITIAL_STACK);
	fp = sp;
	usp = sp;

	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
	call _bf53x_relocate_l1_mem;
	#if CONFIG_BFIN_KERNEL_CLOCK
	call _start_dma_code;
	#endif

	/* Code for initializing Async memory banks */

	p2.h = hi(EBIU_AMBCTL1);
	p2.l = lo(EBIU_AMBCTL1);
	r0.h = hi(AMBCTL1VAL);
	r0.l = lo(AMBCTL1VAL);
	[p2] = r0;
	ssync;

	p2.h = hi(EBIU_AMBCTL0);
	p2.l = lo(EBIU_AMBCTL0);
	r0.h = hi(AMBCTL0VAL);
	r0.l = lo(AMBCTL0VAL);
	[p2] = r0;
	ssync;

	p2.h = hi(EBIU_AMGCTL);
	p2.l = lo(EBIU_AMGCTL);
	r0 = AMGCTLVAL;
	w[p2] = r0;
	ssync;

	/* This section keeps the processor in supervisor mode
	* during kernel boot. Switches to user mode at end of boot.
	* See page 3-9 of Hardware Reference manual for documentation.
	*/

	/* EVT15 = _real_start */

	p0.l = lo(EVT15);
	p0.h = hi(EVT15);
	p1.l = _real_start;
	p1.h = _real_start;
	[p0] = p1;
	csync;

	p0.l = lo(IMASK);
	p0.h = hi(IMASK);
	p1.l = IMASK_IVG15;
	p1.h = 0x0;
	[p0] = p1;
	csync;

	raise 15;
	p0.l = .LWAIT_HERE;
	p0.h = .LWAIT_HERE;
	reti = p0;
	#if defined(ANOMALY_05000281)
	nop; nop; nop;
	#endif
	rti;

	.LWAIT_HERE:
	jump .LWAIT_HERE;
	ENDPROC(__start)

	ENTRY(_real_start)
	[ -- sp ] = reti;
	p0.l = lo(WDOG_CTL);
	p0.h = hi(WDOG_CTL);
	r0 = 0xAD6(z);
	w[p0] = r0; /* watchdog off for now */
	ssync;

	/* Code update for BSS size == 0
	* Zero out the bss region.
	*/

	p1.l = ___bss_start;
	p1.h = ___bss_start;
	p2.l = ___bss_stop;
	p2.h = ___bss_stop;
	r0 = 0;
	p2 -= p1;
	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
	.L_clear_bss:
	B[p1++] = r0;

	/* In case there is a NULL pointer reference
	* Zero out region before stext
	*/

	p1.l = 0x0;
	p1.h = 0x0;
	r0.l = __stext;
	r0.h = __stext;
	r0 = r0 >> 1;
	p2 = r0;
	r0 = 0;
	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
	.L_clear_zero:
	W[p1++] = r0;

	/* pass the uboot arguments to the global value command line */
	R0 = R7;
	call _cmdline_init;

	p1.l = __rambase;
	p1.h = __rambase;
	r0.l = __sdata;
	r0.h = __sdata;
	[p1] = r0;

	p1.l = __ramstart;
	p1.h = __ramstart;
	p3.l = ___bss_stop;
	p3.h = ___bss_stop;

	r1 = p3;
	[p1] = r1;

	/*
	* load the current thread pointer and stack
	*/
	r1.l = _init_thread_union;
	r1.h = _init_thread_union;

	r2.l = 0x2000;
	r2.h = 0x0000;
	r1 = r1 + r2;
	sp = r1;
	usp = sp;
	fp = sp;
	jump.l _start_kernel;
	ENDPROC(_real_start)

	__FINIT

	.section .l1.text
	#if CONFIG_BFIN_KERNEL_CLOCK
	ENTRY(_start_dma_code)
	p0.h = hi(SIC_IWR);
	p0.l = lo(SIC_IWR);
	r0.l = 0x1;
	r0.h = 0x0;
	[p0] = r0;
	SSYNC;

	/*
	* Set PLL_CTL
	* - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
	* - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
	* - [7] = output delay (add 200ps of delay to mem signals)
	* - [6] = input delay (add 200ps of input delay to mem signals)
	* - [5] = PDWN : 1=All Clocks off
	* - [3] = STOPCK : 1=Core Clock off
	* - [1] = PLL_OFF : 1=Disable Power to PLL
	* - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
	* all other bits set to zero
	*/

	p0.h = hi(PLL_LOCKCNT);
	p0.l = lo(PLL_LOCKCNT);
	r0 = 0x300(Z);
	w[p0] = r0.l;
	ssync;

	P2.H = hi(EBIU_SDGCTL);
	P2.L = lo(EBIU_SDGCTL);
	R0 = [P2];
	BITSET (R0, 24);
	[P2] = R0;
	SSYNC;

	r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
	r0 = r0 << 9; /* Shift it over, */
	r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
	r0 = r1 \| r0;
	r1 = PLL_BYPASS; /* Bypass the PLL? */
	r1 = r1 << 8; /* Shift it over */
	r0 = r1 \| r0; /* add them all together */

	p0.h = hi(PLL_CTL);
	p0.l = lo(PLL_CTL); /* Load the address */
	cli r2; /* Disable interrupts */
	ssync;
	w[p0] = r0.l; /* Set the value */
	idle; /* Wait for the PLL to stablize */
	sti r2; /* Enable interrupts */

	.Lcheck_again:
	p0.h = hi(PLL_STAT);
	p0.l = lo(PLL_STAT);
	R0 = W[P0](Z);
	CC = BITTST(R0,5);
	if ! CC jump .Lcheck_again;

	/* Configure SCLK & CCLK Dividers */
	r0 = (CONFIG_CCLK_ACT_DIV \| CONFIG_SCLK_DIV);
	p0.h = hi(PLL_DIV);
	p0.l = lo(PLL_DIV);
	w[p0] = r0.l;
	ssync;

	p0.l = lo(EBIU_SDRRC);
	p0.h = hi(EBIU_SDRRC);
	r0 = mem_SDRRC;
	w[p0] = r0.l;
	ssync;

	p0.l = (EBIU_SDBCTL & 0xFFFF);
	p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
	r0 = mem_SDBCTL;
	w[p0] = r0.l;
	ssync;

	P2.H = hi(EBIU_SDGCTL);
	P2.L = lo(EBIU_SDGCTL);
	R0 = [P2];
	BITCLR (R0, 24);
	p0.h = hi(EBIU_SDSTAT);
	p0.l = lo(EBIU_SDSTAT);
	r2.l = w[p0];
	cc = bittst(r2,3);
	if !cc jump .Lskip;
	NOP;
	BITSET (R0, 23);
	.Lskip:
	[P2] = R0;
	SSYNC;

	R0.L = lo(mem_SDGCTL);
	R0.H = hi(mem_SDGCTL);
	R1 = [p2];
	R1 = R1 \| R0;
	[P2] = R1;
	SSYNC;

	p0.h = hi(SIC_IWR);
	p0.l = lo(SIC_IWR);
	r0.l = lo(IWR_ENABLE_ALL);
	r0.h = hi(IWR_ENABLE_ALL);
	[p0] = r0;
	SSYNC;

	RTS;
	ENDPROC(_start_dma_code)
	#endif /* CONFIG_BFIN_KERNEL_CLOCK */

	ENTRY(_bfin_reset)
	/* No more interrupts to be handled*/
	CLI R6;
	SSYNC;

	#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
	p0.h = hi(FIO_INEN);
	p0.l = lo(FIO_INEN);
	r0.l = ~(1 << CONFIG_ENET_FLASH_PIN);
	w[p0] = r0.l;

	p0.h = hi(FIO_DIR);
	p0.l = lo(FIO_DIR);
	r0.l = (1 << CONFIG_ENET_FLASH_PIN);
	w[p0] = r0.l;

	p0.h = hi(FIO_FLAG_C);
	p0.l = lo(FIO_FLAG_C);
	r0.l = (1 << CONFIG_ENET_FLASH_PIN);
	w[p0] = r0.l;
	#endif

	/* Clear the IMASK register */
	p0.h = hi(IMASK);
	p0.l = lo(IMASK);
	r0 = 0x0;
	[p0] = r0;

	/* Clear the ILAT register */
	p0.h = hi(ILAT);
	p0.l = lo(ILAT);
	r0 = [p0];
	[p0] = r0;
	SSYNC;

	/* make sure SYSCR is set to use BMODE */
	P0.h = hi(SYSCR);
	P0.l = lo(SYSCR);
	R0.l = 0x0;
	W[P0] = R0.l;
	SSYNC;

	/* issue a system soft reset */
	P1.h = hi(SWRST);
	P1.l = lo(SWRST);
	R1.l = 0x0007;
	W[P1] = R1;
	SSYNC;

	/* clear system soft reset */
	R0.l = 0x0000;
	W[P0] = R0;
	SSYNC;

	/* issue core reset */
	raise 1;

	RTS;
	ENDPROC(_bfin_reset)

	#if CONFIG_DEBUG_KERNEL_START
	debug_kernel_start_trap:
	/* Set up a temp stack in L1 - SDRAM might not be working */
	P0.L = lo(L1_DATA_A_START + 0x100);
	P0.H = hi(L1_DATA_A_START + 0x100);
	SP = P0;

	/* Make sure the Clocks are the way I think they should be */
	r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
	r0 = r0 << 9; /* Shift it over, */
	r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
	r0 = r1 \| r0;
	r1 = PLL_BYPASS; /* Bypass the PLL? */
	r1 = r1 << 8; /* Shift it over */
	r0 = r1 \| r0; /* add them all together */

	p0.h = hi(PLL_CTL);
	p0.l = lo(PLL_CTL); /* Load the address */
	cli r2; /* Disable interrupts */
	ssync;
	w[p0] = r0.l; /* Set the value */
	idle; /* Wait for the PLL to stablize */
	sti r2; /* Enable interrupts */

	.Lcheck_again1:
	p0.h = hi(PLL_STAT);
	p0.l = lo(PLL_STAT);
	R0 = W[P0](Z);
	CC = BITTST(R0,5);
	if ! CC jump .Lcheck_again1;

	/* Configure SCLK & CCLK Dividers */
	r0 = (CONFIG_CCLK_ACT_DIV \| CONFIG_SCLK_DIV);
	p0.h = hi(PLL_DIV);
	p0.l = lo(PLL_DIV);
	w[p0] = r0.l;
	ssync;

	/* Make sure UART is enabled - you can never be sure */

	/*
	* Setup for console. Argument comes from the menuconfig
	*/

	#ifdef CONFIG_BAUD_9600
	#define CONSOLE_BAUD_RATE 9600
	#elif CONFIG_BAUD_19200
	#define CONSOLE_BAUD_RATE 19200
	#elif CONFIG_BAUD_38400
	#define CONSOLE_BAUD_RATE 38400
	#elif CONFIG_BAUD_57600
	#define CONSOLE_BAUD_RATE 57600
	#elif CONFIG_BAUD_115200
	#define CONSOLE_BAUD_RATE 115200
	#endif

	p0.h = hi(UART_GCTL);
	p0.l = lo(UART_GCTL);
	r0 = 0x00(Z);
	w[p0] = r0.L; /* To Turn off UART clocks */
	ssync;

	p0.h = hi(UART_LCR);
	p0.l = lo(UART_LCR);
	r0 = 0x83(Z);
	w[p0] = r0.L; /* To enable DLL writes */
	ssync;

	R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));

	p0.h = hi(UART_DLL);
	p0.l = lo(UART_DLL);
	r0 = 0xFF(Z);
	r0 = R1 & R0;
	w[p0] = r0.L;
	ssync;

	p0.h = hi(UART_DLH);
	p0.l = lo(UART_DLH);
	r1 >>= 8 ;
	w[p0] = r1.L;
	ssync;

	p0.h = hi(UART_GCTL);
	p0.l = lo(UART_GCTL);
	r0 = 0x0(Z);
	w[p0] = r0.L; /* To enable UART clock */
	ssync;

	p0.h = hi(UART_LCR);
	p0.l = lo(UART_LCR);
	r0 = 0x03(Z);
	w[p0] = r0.L; /* To Turn on UART */
	ssync;

	p0.h = hi(UART_GCTL);
	p0.l = lo(UART_GCTL);
	r0 = 0x01(Z);
	w[p0] = r0.L; /* To Turn on UART Clocks */
	ssync;

	P0.h = hi(UART_THR);
	P0.l = lo(UART_THR);
	P1.h = hi(UART_LSR);
	P1.l = lo(UART_LSR);

	R0.L = 'K';
	call .Lwait_char;
	R0.L='e';
	call .Lwait_char;
	R0.L='r';
	call .Lwait_char;
	R0.L='n'
	call .Lwait_char;
	R0.L='e'
	call .Lwait_char;
	R0.L='l';
	call .Lwait_char;
	R0.L=' ';
	call .Lwait_char;
	R0.L='c';
	call .Lwait_char;
	R0.L='r';
	call .Lwait_char;
	R0.L='a';
	call .Lwait_char;
	R0.L='s';
	call .Lwait_char;
	R0.L='h';
	call .Lwait_char;
	R0.L='\r';
	call .Lwait_char;
	R0.L='\n';
	call .Lwait_char;

	R0.L='S';
	call .Lwait_char;
	R0.L='E';
	call .Lwait_char;
	R0.L='Q'
	call .Lwait_char;
	R0.L='S'
	call .Lwait_char;
	R0.L='T';
	call .Lwait_char;
	R0.L='A';
	call .Lwait_char;
	R0.L='T';
	call .Lwait_char;
	R0.L='=';
	call .Lwait_char;
	R2 = SEQSTAT;
	call .Ldump_reg;

	R0.L=' ';
	call .Lwait_char;
	R0.L='R';
	call .Lwait_char;
	R0.L='E'
	call .Lwait_char;
	R0.L='T'
	call .Lwait_char;
	R0.L='X';
	call .Lwait_char;
	R0.L='=';
	call .Lwait_char;
	R2 = RETX;
	call .Ldump_reg;

	R0.L='\r';
	call .Lwait_char;
	R0.L='\n';
	call .Lwait_char;

	.Ldebug_kernel_start_trap_done:
	JUMP .Ldebug_kernel_start_trap_done;
	.Ldump_reg:
	R3 = 32;
	R4 = 0x0F;
	R5 = ':'; /* one past 9 */

	.Ldump_reg2:
	R0 = R2;
	R3 += -4;
	R0 >>>= R3;
	R0 = R0 & R4;
	R0 += 0x30;
	CC = R0 <= R5;
	if CC JUMP .Ldump_reg1;
	R0 += 7;

	.Ldump_reg1:
	R1.l = W[P1];
	CC = BITTST(R1, 5);
	if !CC JUMP .Ldump_reg1;
	W[P0] = r0;

	CC = R3 == 0;
	if !CC JUMP .Ldump_reg2
	RTS;

	.Lwait_char:
	R1.l = W[P1];
	CC = BITTST(R1, 5);
	if !CC JUMP .Lwait_char;
	W[P0] = r0;
	RTS;

	#endif /* CONFIG_DEBUG_KERNEL_START */

	.data

	/*
	* Set up the usable of RAM stuff. Size of RAM is determined then
	* an initial stack set up at the end.
	*/

	.align 4
	__rambase:
	.long 0
	__ramstart:
	.long 0
	__ramend:
	.long 0