| /* |
| * s2mpu08.c |
| * |
| * Copyright (c) 2016 Samsung Electronics Co., Ltd |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/bug.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/of_gpio.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/mfd/samsung/s2mpu08.h> |
| #include <linux/mfd/samsung/s2mpu08-private.h> |
| #include <linux/io.h> |
| #include <linux/mutex.h> |
| #include <linux/exynos-ss.h> |
| #include <linux/debugfs.h> |
| #ifdef CONFIG_SEC_PM |
| #include <linux/sec_sysfs.h> |
| |
| #define STATUS1_ACOK BIT(2) |
| |
| static struct device *ap_pmic_dev; |
| #endif |
| |
| static struct s2mpu08_info *static_info; |
| static struct regulator_desc regulators[S2MPU08_REGULATOR_MAX]; |
| |
| #ifdef CONFIG_DEBUG_FS |
| static u8 i2caddr = 0; |
| static u8 i2cdata = 0; |
| static struct i2c_client *dbgi2c = NULL; |
| static struct dentry *s2mpu08_root = NULL; |
| static struct dentry *s2mpu08_i2caddr = NULL; |
| static struct dentry *s2mpu08_i2cdata = NULL; |
| #endif |
| |
| struct s2mpu08_info { |
| struct regulator_dev *rdev[S2MPU08_REGULATOR_MAX]; |
| unsigned int opmode[S2MPU08_REGULATOR_MAX]; |
| int num_regulators; |
| struct s2mpu08_dev *iodev; |
| struct mutex lock; |
| struct i2c_client *i2c; |
| }; |
| |
| static unsigned int s2mpu08_of_map_mode(unsigned int val) { |
| switch (val) { |
| case SEC_OPMODE_SUSPEND: /* ON in Standby Mode */ |
| return 0x1; |
| case SEC_OPMODE_MIF: /* ON in PWREN_MIF mode */ |
| return 0x2; |
| case SEC_OPMODE_ON: /* ON in Normal Mode */ |
| return 0x3; |
| default: |
| return 0x3; |
| } |
| } |
| |
| /* Some LDOs supports [LPM/Normal]ON mode during suspend state */ |
| static int s2m_set_mode(struct regulator_dev *rdev, |
| unsigned int mode) |
| { |
| struct s2mpu08_info *s2mpu08 = rdev_get_drvdata(rdev); |
| unsigned int val; |
| int ret, id = rdev_get_id(rdev); |
| |
| val = mode << S2MPU08_ENABLE_SHIFT; |
| |
| ret = s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->enable_reg, |
| val, rdev->desc->enable_mask); |
| if (ret) |
| return ret; |
| |
| s2mpu08->opmode[id] = val; |
| return 0; |
| } |
| |
| static int s2m_enable(struct regulator_dev *rdev) |
| { |
| struct s2mpu08_info *s2mpu08 = rdev_get_drvdata(rdev); |
| int reg_id = rdev_get_id(rdev); |
| u8 val; |
| |
| /* if rev_id is not 0 w/a is unnecessary */ |
| if (s2mpu08->iodev->pmic_rev == 0x0 && |
| (reg_id == S2MPU08_LDO35 || reg_id == S2MPU08_LDO36)) |
| goto ldo35_36_workaround; |
| |
| /* disregard BUCK5 enable */ |
| if (reg_id == S2MPU08_BUCK5) |
| return 0; |
| |
| return s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->enable_reg, |
| s2mpu08->opmode[rdev_get_id(rdev)], |
| rdev->desc->enable_mask); |
| |
| ldo35_36_workaround: |
| |
| if (reg_id == S2MPU08_LDO35) { |
| s2mpu08_read_reg(s2mpu08->i2c, S2MPU08_PMIC_REG_L36CTRL, &val); |
| pr_info("%s : LDO36_CTRL(0x50[7:6]) : [0x%x]\n", __func__, (val & 0xC0)); |
| |
| /* if LDO36 is on */ |
| if ((val & 0xC0) != 0x00) { |
| s2mpu08_update_reg(s2mpu08->i2c, 0x75, 0x00, 0xF0); |
| s2mpu08_update_reg(s2mpu08->i2c, 0xFF, 0x00, 0x08); |
| pr_info("%s : LDO36 on / LDO35 on\n", __func__); |
| return 0; |
| } |
| |
| else { |
| s2mpu08_update_reg(s2mpu08->i2c, 0x75, 0xF0, 0xF0); |
| s2mpu08_update_reg(s2mpu08->i2c, 0xFF, 0x08, 0x08); |
| pr_info("%s : LDO36 off / LDO35 on\n", __func__); |
| return 0; |
| } |
| } |
| |
| /* reg_id == S2MPU08_LDO36 */ |
| else { |
| s2mpu08_read_reg(s2mpu08->i2c, 0xFF, &val); |
| pr_info("%s : EXT_CTRL(0xFF[3]) : [0x%x]\n", __func__, (val & 0x08)); |
| |
| /* if LDO35 is on */ |
| if ((val & 0x08) == 0x08) { |
| s2mpu08_update_reg(s2mpu08->i2c, 0x75, 0x00, 0xF0); |
| s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->enable_reg, |
| 0xC0, rdev->desc->enable_mask); |
| /* LDO35 should be off when LDO36 is on */ |
| s2mpu08_update_reg(s2mpu08->i2c, 0xFF, 0x00, 0x08); |
| pr_info("%s : LDO35 on / LDO36 on\n", __func__); |
| return 0; |
| } |
| |
| else { |
| s2mpu08_update_reg(s2mpu08->i2c, 0x75, 0xF0, 0xF0); |
| s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->enable_reg, |
| 0xC0, rdev->desc->enable_mask); |
| pr_info("%s : LDO35 off / LDO36 on\n", __func__); |
| return 0; |
| } |
| } |
| } |
| |
| static int s2m_disable_regmap(struct regulator_dev *rdev) |
| { |
| struct s2mpu08_info *s2mpu08 = rdev_get_drvdata(rdev); |
| int reg_id = rdev_get_id(rdev); |
| u8 val; |
| |
| /* if rev_id is not 0 w/a is unnecessary */ |
| if (s2mpu08->iodev->pmic_rev == 0x0 && |
| (reg_id == S2MPU08_LDO35 || reg_id == S2MPU08_LDO36)) |
| goto ldo35_36_workaround; |
| |
| /* disregard BUCK5 disable */ |
| if (reg_id == S2MPU08_BUCK5) |
| return 0; |
| |
| if (rdev->desc->enable_is_inverted) |
| val = rdev->desc->enable_mask; |
| else |
| val = 0; |
| |
| return s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->enable_reg, |
| val, rdev->desc->enable_mask); |
| |
| ldo35_36_workaround: |
| |
| if (reg_id == S2MPU08_LDO35) { |
| s2mpu08_read_reg(s2mpu08->i2c, S2MPU08_PMIC_REG_L36CTRL, &val); |
| pr_info("%s : LDO36_CTRL(0x50[7:6]) : [0x%x]\n", __func__, (val & 0xC0)); |
| |
| /* if LDO36 is on */ |
| if ((val & 0xC0) != 0x00) { |
| s2mpu08_update_reg(s2mpu08->i2c, 0x75, 0xF0, 0xF0); |
| s2mpu08_update_reg(s2mpu08->i2c, 0xFF, 0x00, 0x08); |
| pr_info("%s : LDO36 on / LDO35 off\n", __func__); |
| return 0; |
| } |
| |
| else { |
| s2mpu08_update_reg(s2mpu08->i2c, 0x75, 0x00, 0xF0); |
| s2mpu08_update_reg(s2mpu08->i2c, 0xFF, 0x00, 0x08); |
| pr_info("%s : LDO36 off / LDO35 is off\n", __func__); |
| return 0; |
| } |
| } |
| |
| /* reg_id == S2MPU08_LDO36 */ |
| else { |
| s2mpu08_read_reg(s2mpu08->i2c, 0x75, &val); |
| pr_info("%s : SEQ44(0x75[7:4]) : [0x%x]\n", __func__, (val & 0xF0)); |
| |
| /* if LDO35 is on */ |
| if ((val & 0xF0) == 0x00) { |
| s2mpu08_update_reg(s2mpu08->i2c, 0xFF, 0x08, 0x08); |
| s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->enable_reg, |
| 0, rdev->desc->enable_mask); |
| s2mpu08_update_reg(s2mpu08->i2c, 0x75, 0xF0, 0xF0); |
| pr_info("%s : LDO35 on / LDO36 off\n", __func__); |
| return 0; |
| } |
| |
| else { |
| s2mpu08_update_reg(s2mpu08->i2c, 0xFF, 0x00, 0x08); |
| s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->enable_reg, |
| 0x00, rdev->desc->enable_mask); |
| pr_info("%s : LDO35 off / LDO36 off\n", __func__); |
| return 0; |
| } |
| } |
| } |
| |
| static int s2m_is_enabled_regmap(struct regulator_dev *rdev) |
| { |
| struct s2mpu08_info *s2mpu08 = rdev_get_drvdata(rdev); |
| int ret, reg_id = rdev_get_id(rdev); |
| u8 val, val2, val3; |
| |
| /* if rev_id is not 0 w/a is unnecessary */ |
| if (s2mpu08->iodev->pmic_rev == 0x0 && |
| reg_id == S2MPU08_LDO35) |
| goto ldo35_36_workaround; |
| |
| if (reg_id == S2MPU08_BUCK5) |
| return 0; |
| |
| else { |
| ret = s2mpu08_read_reg(s2mpu08->i2c, |
| rdev->desc->enable_reg, &val); |
| if (ret) |
| return ret; |
| } |
| |
| if (rdev->desc->enable_is_inverted) |
| return (val & rdev->desc->enable_mask) == 0; |
| else |
| return (val & rdev->desc->enable_mask) != 0; |
| |
| ldo35_36_workaround: |
| |
| s2mpu08_read_reg(s2mpu08->i2c, 0xFF, &val); |
| |
| if ((val & 0x08) == 0x08) |
| return 1; |
| |
| else { |
| s2mpu08_read_reg(s2mpu08->i2c, S2MPU08_PMIC_REG_L36CTRL, &val2); |
| s2mpu08_read_reg(s2mpu08->i2c, 0x75, &val3); |
| |
| if (((val2 & 0xC0) != 0x00) && ((val3 & 0xF0) == 0x00)) |
| return 1; |
| else |
| return 0; |
| } |
| } |
| |
| static int get_ramp_delay(int ramp_delay) |
| { |
| unsigned char cnt = 0; |
| |
| ramp_delay /= 6; |
| |
| while (true) { |
| ramp_delay = ramp_delay >> 1; |
| if (ramp_delay == 0) |
| break; |
| cnt++; |
| } |
| return cnt; |
| } |
| |
| static int s2m_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) |
| { |
| struct s2mpu08_info *s2mpu08 = rdev_get_drvdata(rdev); |
| int ramp_shift, reg_id = rdev_get_id(rdev); |
| int ramp_mask = 0x03; |
| unsigned int ramp_value = 0; |
| |
| ramp_value = get_ramp_delay(ramp_delay/1000); |
| if (ramp_value > 4) { |
| pr_warn("%s: ramp_delay: %d not supported\n", |
| rdev->desc->name, ramp_delay); |
| } |
| |
| switch (reg_id) { |
| case S2MPU08_BUCK1: |
| case S2MPU08_BUCK6: |
| case S2MPU08_BUCK7: |
| ramp_shift = 6; |
| break; |
| case S2MPU08_BUCK2: |
| case S2MPU08_BUCK3: |
| ramp_shift = 4; |
| break; |
| case S2MPU08_BUCK4: |
| case S2MPU08_BUCK5: |
| ramp_shift = 2; |
| break; |
| case S2MPU08_BUCK8: |
| ramp_shift = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return s2mpu08_update_reg(s2mpu08->i2c, S2MPU08_PMIC_REG_BUCKRAMP, |
| ramp_value << ramp_shift, ramp_mask << ramp_shift); |
| } |
| |
| static int s2m_get_voltage_sel_regmap(struct regulator_dev *rdev) |
| { |
| struct s2mpu08_info *s2mpu08 = rdev_get_drvdata(rdev); |
| int ret; |
| u8 val; |
| |
| ret = s2mpu08_read_reg(s2mpu08->i2c, rdev->desc->vsel_reg, &val); |
| if (ret) |
| return ret; |
| |
| val &= rdev->desc->vsel_mask; |
| |
| return val; |
| } |
| |
| static int s2m_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel) |
| { |
| struct s2mpu08_info *s2mpu08 = rdev_get_drvdata(rdev); |
| int reg_id = rdev_get_id(rdev); |
| int ret; |
| char name[16]; |
| unsigned int voltage; |
| |
| /* voltage information logging to snapshot feature */ |
| snprintf(name, sizeof(name), "LDO%d", (reg_id - S2MPU08_LDO1) + 1); |
| voltage = ((sel & rdev->desc->vsel_mask) * S2MPU08_LDO_STEP2) + S2MPU08_LDO_MIN1; |
| ret = s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->vsel_reg, |
| sel, rdev->desc->vsel_mask); |
| if (ret < 0) |
| goto out; |
| |
| if (rdev->desc->apply_bit) |
| ret = s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->apply_reg, |
| rdev->desc->apply_bit, |
| rdev->desc->apply_bit); |
| return ret; |
| out: |
| pr_warn("%s: failed to set voltage_sel_regmap\n", rdev->desc->name); |
| return ret; |
| } |
| |
| static int s2m_set_voltage_sel_regmap_buck(struct regulator_dev *rdev, |
| unsigned sel) |
| { |
| int ret; |
| struct s2mpu08_info *s2mpu08 = rdev_get_drvdata(rdev); |
| |
| ret = s2mpu08_write_reg(s2mpu08->i2c, rdev->desc->vsel_reg, sel); |
| if (ret < 0) |
| goto i2c_out; |
| |
| if (rdev->desc->apply_bit) |
| ret = s2mpu08_update_reg(s2mpu08->i2c, rdev->desc->apply_reg, |
| rdev->desc->apply_bit, |
| rdev->desc->apply_bit); |
| |
| return ret; |
| |
| i2c_out: |
| pr_warn("%s: failed to set voltage_sel_regmap\n", rdev->desc->name); |
| return ret; |
| } |
| |
| static int s2m_set_voltage_time_sel(struct regulator_dev *rdev, |
| unsigned int old_selector, |
| unsigned int new_selector) |
| { |
| unsigned int ramp_delay = 0; |
| int old_volt, new_volt; |
| |
| if (rdev->constraints->ramp_delay) |
| ramp_delay = rdev->constraints->ramp_delay; |
| else if (rdev->desc->ramp_delay) |
| ramp_delay = rdev->desc->ramp_delay; |
| |
| if (ramp_delay == 0) { |
| pr_warn("%s: ramp_delay not set\n", rdev->desc->name); |
| return -EINVAL; |
| } |
| |
| /* sanity check */ |
| if (!rdev->desc->ops->list_voltage) |
| return -EINVAL; |
| |
| old_volt = rdev->desc->ops->list_voltage(rdev, old_selector); |
| new_volt = rdev->desc->ops->list_voltage(rdev, new_selector); |
| |
| if (old_selector < new_selector) |
| return DIV_ROUND_UP(new_volt - old_volt, ramp_delay); |
| |
| return 0; |
| } |
| |
| static struct regulator_ops s2mpu08_ldo_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .is_enabled = s2m_is_enabled_regmap, |
| .enable = s2m_enable, |
| .disable = s2m_disable_regmap, |
| .get_voltage_sel = s2m_get_voltage_sel_regmap, |
| .set_voltage_sel = s2m_set_voltage_sel_regmap, |
| .set_voltage_time_sel = s2m_set_voltage_time_sel, |
| .set_mode = s2m_set_mode, |
| }; |
| |
| static struct regulator_ops s2mpu08_buck_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .is_enabled = s2m_is_enabled_regmap, |
| .enable = s2m_enable, |
| .disable = s2m_disable_regmap, |
| .get_voltage_sel = s2m_get_voltage_sel_regmap, |
| .set_voltage_sel = s2m_set_voltage_sel_regmap_buck, |
| .set_voltage_time_sel = s2m_set_voltage_time_sel, |
| .set_mode = s2m_set_mode, |
| .set_ramp_delay = s2m_set_ramp_delay, |
| }; |
| |
| #define _BUCK(macro) S2MPU08_BUCK##macro |
| #define _buck_ops(num) s2mpu08_buck_ops##num |
| |
| #define _LDO(macro) S2MPU08_LDO##macro |
| #define _REG(ctrl) S2MPU08_PMIC_REG##ctrl |
| #define _ldo_ops(num) s2mpu08_ldo_ops##num |
| #define _TIME(macro) S2MPU08_ENABLE_TIME##macro |
| |
| #define BUCK_DESC(_name, _id, _ops, m, s, v, e, t) { \ |
| .name = _name, \ |
| .id = _id, \ |
| .ops = _ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = m, \ |
| .uV_step = s, \ |
| .n_voltages = S2MPU08_BUCK_N_VOLTAGES, \ |
| .vsel_reg = v, \ |
| .vsel_mask = S2MPU08_BUCK_VSEL_MASK, \ |
| .enable_reg = e, \ |
| .enable_mask = S2MPU08_ENABLE_MASK, \ |
| .enable_time = t, \ |
| .of_map_mode = s2mpu08_of_map_mode \ |
| } |
| |
| #define LDO_DESC(_name, _id, _ops, m, s, v, e, t) { \ |
| .name = _name, \ |
| .id = _id, \ |
| .ops = _ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = m, \ |
| .uV_step = s, \ |
| .n_voltages = S2MPU08_LDO_N_VOLTAGES, \ |
| .vsel_reg = v, \ |
| .vsel_mask = S2MPU08_LDO_VSEL_MASK, \ |
| .enable_reg = e, \ |
| .enable_mask = S2MPU08_ENABLE_MASK, \ |
| .enable_time = t, \ |
| .of_map_mode = s2mpu08_of_map_mode \ |
| } |
| |
| static struct regulator_desc regulators[S2MPU08_REGULATOR_MAX] = { |
| /* name, id, ops, min_uv, uV_step, vsel_reg, enable_reg */ |
| LDO_DESC("LDO1", _LDO(1), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L1CTRL), _REG(_L1CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO2", _LDO(2), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L2CTRL1), _REG(_L2CTRL1), _TIME(_LDO)), |
| LDO_DESC("LDO3", _LDO(3), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L3CTRL), _REG(_L3CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO4", _LDO(4), &_ldo_ops(), _LDO(_MIN2), |
| _LDO(_STEP1), _REG(_L4CTRL), _REG(_L4CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO5", _LDO(5), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L5CTRL), _REG(_L5CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO6", _LDO(6), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L6CTRL), _REG(_L6CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO7", _LDO(7), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L7CTRL), _REG(_L7CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO8", _LDO(8), &_ldo_ops(), _LDO(_MIN4), |
| _LDO(_STEP2), _REG(_L8CTRL), _REG(_L8CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO9", _LDO(9), &_ldo_ops(), _LDO(_MIN4), |
| _LDO(_STEP2), _REG(_L9CTRL), _REG(_L9CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO10", _LDO(10), &_ldo_ops(), _LDO(_MIN4), |
| _LDO(_STEP2), _REG(_L10CTRL), _REG(_L10CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO11", _LDO(11), &_ldo_ops(), _LDO(_MIN4), |
| _LDO(_STEP2), _REG(_L11CTRL), _REG(_L11CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO12", _LDO(12), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L12CTRL), _REG(_L12CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO13", _LDO(13), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L13CTRL), _REG(_L13CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO14", _LDO(14), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L14CTRL), _REG(_L14CTRL), _TIME(_LDO)), |
| /* LDO_DESC("LDO15", _LDO(15), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L15CTRL), _REG(_L15CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO16", _LDO(16), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L16CTRL), _REG(_L16CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO17", _LDO(17), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L17CTRL), _REG(_L17CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO18", _LDO(18), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L18CTRL), _REG(_L18CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO19", _LDO(19), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L19CTRL), _REG(_L19CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO20", _LDO(20), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L20CTRL), _REG(_L20CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO21", _LDO(21), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L21CTRL), _REG(_L21CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO22", _LDO(22), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L22CTRL), _REG(_L22CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO23", _LDO(23), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L23CTRL), _REG(_L23CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO24", _LDO(24), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L24CTRL), _REG(_L24CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO25", _LDO(25), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L25CTRL), _REG(_L25CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO26", _LDO(26), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L26CTRL), _REG(_L26CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO27", _LDO(27), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L27CTRL), _REG(_L27CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO28", _LDO(28), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L28CTRL), _REG(_L28CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO29", _LDO(29), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP1), _REG(_L29CTRL), _REG(_L29CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO30", _LDO(30), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L30CTRL), _REG(_L30CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO31", _LDO(31), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L31CTRL), _REG(_L31CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO32", _LDO(32), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L32CTRL), _REG(_L32CTRL), _TIME(_LDO)), |
| */ LDO_DESC("LDO33", _LDO(33), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L33CTRL), _REG(_L33CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO34", _LDO(34), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L34CTRL), _REG(_L34CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO35", _LDO(35), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L35CTRL), _REG(_L35CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO36", _LDO(36), &_ldo_ops(), _LDO(_MIN1), |
| _LDO(_STEP2), _REG(_L36CTRL), _REG(_L36CTRL), _TIME(_LDO)), |
| LDO_DESC("LDO37", _LDO(37), &_ldo_ops(), _LDO(_MIN3), |
| _LDO(_STEP2), _REG(_L37CTRL), _REG(_L37CTRL), _TIME(_LDO)), |
| BUCK_DESC("BUCK1", _BUCK(1), &_buck_ops(), _BUCK(_MIN1), |
| _BUCK(_STEP1), _REG(_B1CTRL2), _REG(_B1CTRL1), _TIME(_BUCK1)), |
| BUCK_DESC("BUCK2", _BUCK(2), &_buck_ops(), _BUCK(_MIN1), |
| _BUCK(_STEP1), _REG(_B2CTRL2), _REG(_B2CTRL1), _TIME(_BUCK2)), |
| BUCK_DESC("BUCK3", _BUCK(3), &_buck_ops(), _BUCK(_MIN1), |
| _BUCK(_STEP1), _REG(_B3CTRL2), _REG(_B3CTRL1), _TIME(_BUCK3)), |
| BUCK_DESC("BUCK4", _BUCK(4), &_buck_ops(), _BUCK(_MIN1), |
| _BUCK(_STEP1), _REG(_B4CTRL2), _REG(_B4CTRL1), _TIME(_BUCK4)), |
| BUCK_DESC("BUCK5", _BUCK(5), &_buck_ops(), _BUCK(_MIN1), |
| _BUCK(_STEP1), _REG(_B5CTRL2), _REG(_B5CTRL1), _TIME(_BUCK5)), |
| BUCK_DESC("BUCK6", _BUCK(6), &_buck_ops(), _BUCK(_MIN1), |
| _BUCK(_STEP1), _REG(_B6CTRL2), _REG(_B6CTRL1), _TIME(_BUCK6)), |
| BUCK_DESC("BUCK7", _BUCK(7), &_buck_ops(), _BUCK(_MIN2), |
| _BUCK(_STEP2), _REG(_B7CTRL2), _REG(_B7CTRL1), _TIME(_BUCK7)), |
| BUCK_DESC("BUCK8", _BUCK(8), &_buck_ops(), _BUCK(_MIN2), |
| _BUCK(_STEP2), _REG(_B8CTRL2), _REG(_B8CTRL1), _TIME(_BUCK8)), |
| /* BUCK_DESC("BUCK9", _BUCK(9), &_buck_ops(), _BUCK(_MIN1), |
| _BUCK(_STEP1), _REG(_B9CTRL2), _REG(_B9CTRL1), _TIME(_BUCK9)),*/ |
| }; |
| #ifdef CONFIG_OF |
| static int s2mpu08_pmic_dt_parse_pdata(struct s2mpu08_dev *iodev, |
| struct s2mpu08_platform_data *pdata) |
| { |
| struct device_node *pmic_np, *regulators_np, *reg_np; |
| struct s2mpu08_regulator_data *rdata; |
| unsigned int i; |
| |
| pmic_np = iodev->dev->of_node; |
| if (!pmic_np) { |
| dev_err(iodev->dev, "could not find pmic sub-node\n"); |
| return -ENODEV; |
| } |
| |
| regulators_np = of_find_node_by_name(pmic_np, "regulators"); |
| if (!regulators_np) { |
| dev_err(iodev->dev, "could not find regulators sub-node\n"); |
| return -EINVAL; |
| } |
| |
| /* count the number of regulators to be supported in pmic */ |
| pdata->num_regulators = 0; |
| for_each_child_of_node(regulators_np, reg_np) { |
| pdata->num_regulators++; |
| } |
| |
| rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * |
| pdata->num_regulators, GFP_KERNEL); |
| if (!rdata) { |
| dev_err(iodev->dev, |
| "could not allocate memory for regulator data\n"); |
| return -ENOMEM; |
| } |
| |
| pdata->regulators = rdata; |
| for_each_child_of_node(regulators_np, reg_np) { |
| for (i = 0; i < ARRAY_SIZE(regulators); i++) |
| if (!of_node_cmp(reg_np->name, |
| regulators[i].name)) |
| break; |
| |
| if (i == ARRAY_SIZE(regulators)) { |
| dev_warn(iodev->dev, |
| "don't know how to configure regulator %s\n", |
| reg_np->name); |
| continue; |
| } |
| |
| rdata->id = i; |
| rdata->initdata = of_get_regulator_init_data( |
| iodev->dev, reg_np, |
| ®ulators[i]); |
| rdata->reg_node = reg_np; |
| rdata++; |
| } |
| |
| return 0; |
| } |
| #else |
| static int s2mpu08_pmic_dt_parse_pdata(struct s2mpu08_pmic_dev *iodev, |
| struct s2mpu08_platform_data *pdata) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_OF */ |
| |
| #ifdef CONFIG_DEBUG_FS |
| static ssize_t s2mpu08_i2caddr_read(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[10]; |
| ssize_t ret; |
| |
| ret = snprintf(buf, sizeof(buf), "0x%x\n", i2caddr); |
| if (ret < 0) |
| return ret; |
| |
| return simple_read_from_buffer(user_buf, count, ppos, buf, ret); |
| } |
| |
| static ssize_t s2mpu08_i2caddr_write(struct file *file, const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[10]; |
| ssize_t len; |
| u8 val; |
| |
| len = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count); |
| if (len < 0) |
| return len; |
| |
| buf[len] = '\0'; |
| |
| if (!kstrtou8(buf, 0, &val)) |
| i2caddr = val; |
| |
| return len; |
| } |
| |
| static ssize_t s2mpu08_i2cdata_read(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[10]; |
| ssize_t ret; |
| |
| ret = s2mpu08_read_reg(dbgi2c, i2caddr, &i2cdata); |
| if (ret) |
| return ret; |
| |
| ret = snprintf(buf, sizeof(buf), "0x%x\n", i2cdata); |
| if (ret < 0) |
| return ret; |
| |
| return simple_read_from_buffer(user_buf, count, ppos, buf, ret); |
| } |
| |
| static ssize_t s2mpu08_i2cdata_write(struct file *file, const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[10]; |
| ssize_t len, ret; |
| u8 val; |
| |
| len = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count); |
| if (len < 0) |
| return len; |
| |
| buf[len] = '\0'; |
| |
| if (!kstrtou8(buf, 0, &val)) { |
| ret = s2mpu08_write_reg(dbgi2c, i2caddr, val); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return len; |
| } |
| |
| static const struct file_operations s2mpu08_i2caddr_fops = { |
| .open = simple_open, |
| .read = s2mpu08_i2caddr_read, |
| .write = s2mpu08_i2caddr_write, |
| .llseek = default_llseek, |
| }; |
| static const struct file_operations s2mpu08_i2cdata_fops = { |
| .open = simple_open, |
| .read = s2mpu08_i2cdata_read, |
| .write = s2mpu08_i2cdata_write, |
| .llseek = default_llseek, |
| }; |
| #endif |
| |
| #ifdef CONFIG_SEC_PM |
| static ssize_t chg_det_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int ret, chg_det; |
| u8 val; |
| |
| ret = s2mpu08_read_reg(static_info->i2c, S2MPU08_PMIC_REG_STATUS1, &val); |
| |
| if(ret) |
| chg_det = -1; |
| else |
| chg_det = !!(val & STATUS1_ACOK); // ACOK active high |
| |
| pr_info("%s: ap pmic chg det: %d\n", __func__, chg_det); |
| |
| return sprintf(buf, "%d\n", chg_det); |
| } |
| |
| static DEVICE_ATTR_RO(chg_det); |
| |
| static struct attribute *ap_pmic_attributes[] = { |
| &dev_attr_chg_det.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group ap_pmic_attr_group = { |
| .attrs = ap_pmic_attributes, |
| }; |
| #endif /* CONFIG_SEC_PM */ |
| |
| static int s2mpu08_pmic_probe(struct platform_device *pdev) |
| { |
| struct s2mpu08_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| struct s2mpu08_platform_data *pdata = iodev->pdata; |
| struct regulator_config config = { }; |
| struct s2mpu08_info *s2mpu08; |
| u8 flag_wtp, lowr_wtp; |
| int i, ret; |
| |
| pr_info("%s s2mpu08 pmic driver Loading start\n", __func__); |
| |
| if (iodev->dev->of_node) { |
| ret = s2mpu08_pmic_dt_parse_pdata(iodev, pdata); |
| if (ret) |
| return ret; |
| } |
| |
| if (!pdata) { |
| dev_err(pdev->dev.parent, "Platform data not supplied\n"); |
| return -ENODEV; |
| } |
| |
| s2mpu08 = devm_kzalloc(&pdev->dev, sizeof(struct s2mpu08_info), |
| GFP_KERNEL); |
| if (!s2mpu08) |
| return -ENOMEM; |
| |
| s2mpu08->iodev = iodev; |
| s2mpu08->i2c = iodev->pmic; |
| |
| mutex_init(&s2mpu08->lock); |
| static_info = s2mpu08; |
| |
| platform_set_drvdata(pdev, s2mpu08); |
| |
| for (i = 0; i < pdata->num_regulators; i++) { |
| int id = pdata->regulators[i].id; |
| config.dev = &pdev->dev; |
| config.init_data = pdata->regulators[i].initdata; |
| config.driver_data = s2mpu08; |
| config.of_node = pdata->regulators[i].reg_node; |
| s2mpu08->opmode[id] = |
| regulators[id].enable_mask; |
| |
| s2mpu08->rdev[i] = regulator_register( |
| ®ulators[id], &config); |
| if (IS_ERR(s2mpu08->rdev[i])) { |
| ret = PTR_ERR(s2mpu08->rdev[i]); |
| dev_err(&pdev->dev, "regulator init failed for %d\n", |
| i); |
| s2mpu08->rdev[i] = NULL; |
| goto err; |
| } |
| |
| } |
| |
| s2mpu08->num_regulators = pdata->num_regulators; |
| s2mpu08_update_reg(s2mpu08->i2c, S2MPU08_PMIC_REG_RTCBUF, 0x2, 0x2); |
| |
| /* SELMIF settings */ |
| /* LDO2,4,7,5,6,7,8,33,34,35 - controlled by PWREN_MIF */ |
| /* LDO1,10,11,12,13,14 - controlled by PWREN */ |
| s2mpu08_write_reg(s2mpu08->i2c, S2MPU08_PMIC_REG_SEL_CTRL1, 0x7E); |
| s2mpu08_update_reg(s2mpu08->i2c, S2MPU08_PMIC_REG_SEL_CTRL2, 0x00, 0x7F); |
| |
| /* initial conditions for enabling and disabling LDO35,36 */ |
| /* this w/a will not applied after rev 1 */ |
| s2mpu08_read_reg(iodev->i2c, S2MPU08_PMIC_REG_PMICID, &SEC_PMIC_REV(iodev)); |
| if(iodev->pmic_rev == 0x00) { |
| s2mpu08_update_reg(s2mpu08->i2c, 0x75, 0xF0, 0xF0); |
| s2mpu08_update_reg(s2mpu08->i2c, 0x7C, 0x08, 0x08); |
| s2mpu08_update_reg(s2mpu08->i2c, 0x8B, 0x00, 0x60); |
| } |
| |
| /* changed water out THD in codec side */ |
| s2mpu08_write_reg(iodev->close, 0x83, 0x74); |
| s2mpu08_write_reg(iodev->close, 0x84, 0x0E); |
| |
| /* changed water jack in THD in codec side */ |
| s2mpu08_read_reg(iodev->close, 0x7C, &flag_wtp); |
| if ((flag_wtp & BIT(7)) == false) { |
| s2mpu08_update_reg(iodev->close, 0x7C, BIT(7), BIT(7)); |
| s2mpu08_read_reg(iodev->close, 0x82, &lowr_wtp); |
| lowr_wtp -= 15; |
| s2mpu08_write_reg(iodev->close, 0x82, lowr_wtp); |
| } |
| |
| #ifdef CONFIG_SEC_PM |
| ap_pmic_dev = sec_device_create(NULL, "ap_pmic"); |
| |
| ret = sysfs_create_group(&ap_pmic_dev->kobj, &ap_pmic_attr_group); |
| if (ret) |
| dev_err(&pdev->dev, "failed to create ap_pmic sysfs group\n"); |
| #endif /* CONFIG_SEC_PM */ |
| |
| #ifdef CONFIG_DEBUG_FS |
| dbgi2c = s2mpu08->i2c; |
| s2mpu08_root = debugfs_create_dir("s2mpu08-regs", NULL); |
| s2mpu08_i2caddr = debugfs_create_file("i2caddr", 0644, s2mpu08_root, NULL, &s2mpu08_i2caddr_fops); |
| s2mpu08_i2cdata = debugfs_create_file("i2cdata", 0644, s2mpu08_root, NULL, &s2mpu08_i2cdata_fops); |
| #endif |
| |
| /* Turn off CP regulators for LPM charging: L16 -> L17 -> L15 -> B9 */ |
| if (lpcharge) { |
| s2mpu08_update_reg(s2mpu08->i2c, 0x3C, 0x00, 0xC0); // LDO16 |
| s2mpu08_update_reg(s2mpu08->i2c, 0x3D, 0x00, 0xC0); // LDO17 |
| s2mpu08_update_reg(s2mpu08->i2c, 0x3B, 0x00, 0xC0); // LDO15 |
| s2mpu08_update_reg(s2mpu08->i2c, 0x26, 0x00, 0xC0); // Buck9 |
| } |
| |
| pr_info("%s s2mpu08 pmic driver Loading end\n", __func__); |
| |
| return 0; |
| err: |
| for (i = 0; i < S2MPU08_REGULATOR_MAX; i++) |
| regulator_unregister(s2mpu08->rdev[i]); |
| |
| return ret; |
| } |
| |
| static int s2mpu08_pmic_remove(struct platform_device *pdev) |
| { |
| struct s2mpu08_info *s2mpu08 = platform_get_drvdata(pdev); |
| int i; |
| |
| #ifdef CONFIG_DEBUG_FS |
| debugfs_remove_recursive(s2mpu08_i2cdata); |
| debugfs_remove_recursive(s2mpu08_i2caddr); |
| debugfs_remove_recursive(s2mpu08_root); |
| #endif |
| |
| for (i = 0; i < S2MPU08_REGULATOR_MAX; i++) |
| regulator_unregister(s2mpu08->rdev[i]); |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id s2mpu08_pmic_id[] = { |
| { "s2mpu08-regulator", 0}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, s2mpu08_pmic_id); |
| |
| static struct platform_driver s2mpu08_pmic_driver = { |
| .driver = { |
| .name = "s2mpu08-regulator", |
| .owner = THIS_MODULE, |
| }, |
| .probe = s2mpu08_pmic_probe, |
| .remove = s2mpu08_pmic_remove, |
| .id_table = s2mpu08_pmic_id, |
| }; |
| |
| static int __init s2mpu08_pmic_init(void) |
| { |
| return platform_driver_register(&s2mpu08_pmic_driver); |
| } |
| subsys_initcall(s2mpu08_pmic_init); |
| |
| static void __exit s2mpu08_pmic_exit(void) |
| { |
| platform_driver_unregister(&s2mpu08_pmic_driver); |
| } |
| module_exit(s2mpu08_pmic_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); |
| MODULE_DESCRIPTION("SAMSUNG S2MPU08 Regulator Driver"); |
| MODULE_LICENSE("GPL"); |