| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/perf_event.h> |
| #include <linux/bug.h> |
| #include <linux/stddef.h> |
| #include <asm/perf_regs.h> |
| #include <asm/ptrace.h> |
| |
| #ifdef CONFIG_X86_32 |
| #define PERF_REG_X86_MAX PERF_REG_X86_32_MAX |
| #else |
| #define PERF_REG_X86_MAX PERF_REG_X86_64_MAX |
| #endif |
| |
| #define PT_REGS_OFFSET(id, r) [id] = offsetof(struct pt_regs, r) |
| |
| static unsigned int pt_regs_offset[PERF_REG_X86_MAX] = { |
| PT_REGS_OFFSET(PERF_REG_X86_AX, ax), |
| PT_REGS_OFFSET(PERF_REG_X86_BX, bx), |
| PT_REGS_OFFSET(PERF_REG_X86_CX, cx), |
| PT_REGS_OFFSET(PERF_REG_X86_DX, dx), |
| PT_REGS_OFFSET(PERF_REG_X86_SI, si), |
| PT_REGS_OFFSET(PERF_REG_X86_DI, di), |
| PT_REGS_OFFSET(PERF_REG_X86_BP, bp), |
| PT_REGS_OFFSET(PERF_REG_X86_SP, sp), |
| PT_REGS_OFFSET(PERF_REG_X86_IP, ip), |
| PT_REGS_OFFSET(PERF_REG_X86_FLAGS, flags), |
| PT_REGS_OFFSET(PERF_REG_X86_CS, cs), |
| PT_REGS_OFFSET(PERF_REG_X86_SS, ss), |
| #ifdef CONFIG_X86_32 |
| PT_REGS_OFFSET(PERF_REG_X86_DS, ds), |
| PT_REGS_OFFSET(PERF_REG_X86_ES, es), |
| PT_REGS_OFFSET(PERF_REG_X86_FS, fs), |
| PT_REGS_OFFSET(PERF_REG_X86_GS, gs), |
| #else |
| /* |
| * The pt_regs struct does not store |
| * ds, es, fs, gs in 64 bit mode. |
| */ |
| (unsigned int) -1, |
| (unsigned int) -1, |
| (unsigned int) -1, |
| (unsigned int) -1, |
| #endif |
| #ifdef CONFIG_X86_64 |
| PT_REGS_OFFSET(PERF_REG_X86_R8, r8), |
| PT_REGS_OFFSET(PERF_REG_X86_R9, r9), |
| PT_REGS_OFFSET(PERF_REG_X86_R10, r10), |
| PT_REGS_OFFSET(PERF_REG_X86_R11, r11), |
| PT_REGS_OFFSET(PERF_REG_X86_R12, r12), |
| PT_REGS_OFFSET(PERF_REG_X86_R13, r13), |
| PT_REGS_OFFSET(PERF_REG_X86_R14, r14), |
| PT_REGS_OFFSET(PERF_REG_X86_R15, r15), |
| #endif |
| }; |
| |
| u64 perf_reg_value(struct pt_regs *regs, int idx) |
| { |
| if (WARN_ON_ONCE(idx >= ARRAY_SIZE(pt_regs_offset))) |
| return 0; |
| |
| return regs_get_register(regs, pt_regs_offset[idx]); |
| } |
| |
| #define REG_RESERVED (~((1ULL << PERF_REG_X86_MAX) - 1ULL)) |
| |
| #ifdef CONFIG_X86_32 |
| int perf_reg_validate(u64 mask) |
| { |
| if (!mask || mask & REG_RESERVED) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| u64 perf_reg_abi(struct task_struct *task) |
| { |
| return PERF_SAMPLE_REGS_ABI_32; |
| } |
| |
| void perf_get_regs_user(struct perf_regs *regs_user, |
| struct pt_regs *regs, |
| struct pt_regs *regs_user_copy) |
| { |
| regs_user->regs = task_pt_regs(current); |
| regs_user->abi = perf_reg_abi(current); |
| } |
| #else /* CONFIG_X86_64 */ |
| #define REG_NOSUPPORT ((1ULL << PERF_REG_X86_DS) | \ |
| (1ULL << PERF_REG_X86_ES) | \ |
| (1ULL << PERF_REG_X86_FS) | \ |
| (1ULL << PERF_REG_X86_GS)) |
| |
| int perf_reg_validate(u64 mask) |
| { |
| if (!mask || mask & REG_RESERVED) |
| return -EINVAL; |
| |
| if (mask & REG_NOSUPPORT) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| u64 perf_reg_abi(struct task_struct *task) |
| { |
| if (test_tsk_thread_flag(task, TIF_IA32)) |
| return PERF_SAMPLE_REGS_ABI_32; |
| else |
| return PERF_SAMPLE_REGS_ABI_64; |
| } |
| |
| void perf_get_regs_user(struct perf_regs *regs_user, |
| struct pt_regs *regs, |
| struct pt_regs *regs_user_copy) |
| { |
| struct pt_regs *user_regs = task_pt_regs(current); |
| |
| /* |
| * If we're in an NMI that interrupted task_pt_regs setup, then |
| * we can't sample user regs at all. This check isn't really |
| * sufficient, though, as we could be in an NMI inside an interrupt |
| * that happened during task_pt_regs setup. |
| */ |
| if (regs->sp > (unsigned long)&user_regs->r11 && |
| regs->sp <= (unsigned long)(user_regs + 1)) { |
| regs_user->abi = PERF_SAMPLE_REGS_ABI_NONE; |
| regs_user->regs = NULL; |
| return; |
| } |
| |
| /* |
| * These registers are always saved on 64-bit syscall entry. |
| * On 32-bit entry points, they are saved too except r8..r11. |
| */ |
| regs_user_copy->ip = user_regs->ip; |
| regs_user_copy->ax = user_regs->ax; |
| regs_user_copy->cx = user_regs->cx; |
| regs_user_copy->dx = user_regs->dx; |
| regs_user_copy->si = user_regs->si; |
| regs_user_copy->di = user_regs->di; |
| regs_user_copy->r8 = user_regs->r8; |
| regs_user_copy->r9 = user_regs->r9; |
| regs_user_copy->r10 = user_regs->r10; |
| regs_user_copy->r11 = user_regs->r11; |
| regs_user_copy->orig_ax = user_regs->orig_ax; |
| regs_user_copy->flags = user_regs->flags; |
| regs_user_copy->sp = user_regs->sp; |
| regs_user_copy->cs = user_regs->cs; |
| regs_user_copy->ss = user_regs->ss; |
| |
| /* |
| * Most system calls don't save these registers, don't report them. |
| */ |
| regs_user_copy->bx = -1; |
| regs_user_copy->bp = -1; |
| regs_user_copy->r12 = -1; |
| regs_user_copy->r13 = -1; |
| regs_user_copy->r14 = -1; |
| regs_user_copy->r15 = -1; |
| |
| /* |
| * For this to be at all useful, we need a reasonable guess for |
| * the ABI. Be careful: we're in NMI context, and we're |
| * considering current to be the current task, so we should |
| * be careful not to look at any other percpu variables that might |
| * change during context switches. |
| */ |
| regs_user->abi = user_64bit_mode(user_regs) ? |
| PERF_SAMPLE_REGS_ABI_64 : PERF_SAMPLE_REGS_ABI_32; |
| |
| regs_user->regs = regs_user_copy; |
| } |
| #endif /* CONFIG_X86_32 */ |