| /* |
| * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "uniphier: " fmt |
| |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/log2.h> |
| #include <linux/of_address.h> |
| #include <linux/slab.h> |
| #include <asm/hardware/cache-uniphier.h> |
| #include <asm/outercache.h> |
| |
| /* control registers */ |
| #define UNIPHIER_SSCC 0x0 /* Control Register */ |
| #define UNIPHIER_SSCC_BST BIT(20) /* UCWG burst read */ |
| #define UNIPHIER_SSCC_ACT BIT(19) /* Inst-Data separate */ |
| #define UNIPHIER_SSCC_WTG BIT(18) /* WT gathering on */ |
| #define UNIPHIER_SSCC_PRD BIT(17) /* enable pre-fetch */ |
| #define UNIPHIER_SSCC_ON BIT(0) /* enable cache */ |
| #define UNIPHIER_SSCLPDAWCR 0x30 /* Unified/Data Active Way Control */ |
| #define UNIPHIER_SSCLPIAWCR 0x34 /* Instruction Active Way Control */ |
| |
| /* revision registers */ |
| #define UNIPHIER_SSCID 0x0 /* ID Register */ |
| |
| /* operation registers */ |
| #define UNIPHIER_SSCOPE 0x244 /* Cache Operation Primitive Entry */ |
| #define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */ |
| #define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */ |
| #define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */ |
| #define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */ |
| #define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */ |
| #define UNIPHIER_SSCOQM 0x248 /* Cache Operation Queue Mode */ |
| #define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21) |
| #define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21) |
| #define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21) |
| #define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21) |
| #define UNIPHIER_SSCOQM_S_MASK (0x3 << 17) |
| #define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17) |
| #define UNIPHIER_SSCOQM_S_ALL (0x1 << 17) |
| #define UNIPHIER_SSCOQM_S_WAY (0x2 << 17) |
| #define UNIPHIER_SSCOQM_CE BIT(15) /* notify completion */ |
| #define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */ |
| #define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */ |
| #define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */ |
| #define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */ |
| #define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */ |
| #define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */ |
| #define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */ |
| #define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */ |
| #define UNIPHIER_SSCOQAD 0x24c /* Cache Operation Queue Address */ |
| #define UNIPHIER_SSCOQSZ 0x250 /* Cache Operation Queue Size */ |
| #define UNIPHIER_SSCOQMASK 0x254 /* Cache Operation Queue Address Mask */ |
| #define UNIPHIER_SSCOQWN 0x258 /* Cache Operation Queue Way Number */ |
| #define UNIPHIER_SSCOPPQSEF 0x25c /* Cache Operation Queue Set Complete*/ |
| #define UNIPHIER_SSCOPPQSEF_FE BIT(1) |
| #define UNIPHIER_SSCOPPQSEF_OE BIT(0) |
| #define UNIPHIER_SSCOLPQS 0x260 /* Cache Operation Queue Status */ |
| #define UNIPHIER_SSCOLPQS_EF BIT(2) |
| #define UNIPHIER_SSCOLPQS_EST BIT(1) |
| #define UNIPHIER_SSCOLPQS_QST BIT(0) |
| |
| /* Is the touch/pre-fetch destination specified by ways? */ |
| #define UNIPHIER_SSCOQM_TID_IS_WAY(op) \ |
| ((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY) |
| /* Is the operation region specified by address range? */ |
| #define UNIPHIER_SSCOQM_S_IS_RANGE(op) \ |
| ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE) |
| |
| /** |
| * uniphier_cache_data - UniPhier outer cache specific data |
| * |
| * @ctrl_base: virtual base address of control registers |
| * @rev_base: virtual base address of revision registers |
| * @op_base: virtual base address of operation registers |
| * @way_present_mask: each bit specifies if the way is present |
| * @way_locked_mask: each bit specifies if the way is locked |
| * @nsets: number of associativity sets |
| * @line_size: line size in bytes |
| * @range_op_max_size: max size that can be handled by a single range operation |
| * @list: list node to include this level in the whole cache hierarchy |
| */ |
| struct uniphier_cache_data { |
| void __iomem *ctrl_base; |
| void __iomem *rev_base; |
| void __iomem *op_base; |
| u32 way_present_mask; |
| u32 way_locked_mask; |
| u32 nsets; |
| u32 line_size; |
| u32 range_op_max_size; |
| struct list_head list; |
| }; |
| |
| /* |
| * List of the whole outer cache hierarchy. This list is only modified during |
| * the early boot stage, so no mutex is taken for the access to the list. |
| */ |
| static LIST_HEAD(uniphier_cache_list); |
| |
| /** |
| * __uniphier_cache_sync - perform a sync point for a particular cache level |
| * |
| * @data: cache controller specific data |
| */ |
| static void __uniphier_cache_sync(struct uniphier_cache_data *data) |
| { |
| /* This sequence need not be atomic. Do not disable IRQ. */ |
| writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC, |
| data->op_base + UNIPHIER_SSCOPE); |
| /* need a read back to confirm */ |
| readl_relaxed(data->op_base + UNIPHIER_SSCOPE); |
| } |
| |
| /** |
| * __uniphier_cache_maint_common - run a queue operation for a particular level |
| * |
| * @data: cache controller specific data |
| * @start: start address of range operation (don't care for "all" operation) |
| * @size: data size of range operation (don't care for "all" operation) |
| * @operation: flags to specify the desired cache operation |
| */ |
| static void __uniphier_cache_maint_common(struct uniphier_cache_data *data, |
| unsigned long start, |
| unsigned long size, |
| u32 operation) |
| { |
| unsigned long flags; |
| |
| /* |
| * No spin lock is necessary here because: |
| * |
| * [1] This outer cache controller is able to accept maintenance |
| * operations from multiple CPUs at a time in an SMP system; if a |
| * maintenance operation is under way and another operation is issued, |
| * the new one is stored in the queue. The controller performs one |
| * operation after another. If the queue is full, the status register, |
| * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has |
| * failed. The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have |
| * different instances for each CPU, i.e. each CPU can track the status |
| * of the maintenance operations triggered by itself. |
| * |
| * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ, |
| * SSCOQWN}, are shared between multiple CPUs, but the hardware still |
| * guarantees the registration sequence is atomic; the write access to |
| * them are arbitrated by the hardware. The first accessor to the |
| * register, UNIPHIER_SSCOQM, holds the access right and it is released |
| * by reading the status register, UNIPHIER_SSCOPPQSEF. While one CPU |
| * is holding the access right, other CPUs fail to register operations. |
| * One CPU should not hold the access right for a long time, so local |
| * IRQs should be disabled while the following sequence. |
| */ |
| local_irq_save(flags); |
| |
| /* clear the complete notification flag */ |
| writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS); |
| |
| do { |
| /* set cache operation */ |
| writel_relaxed(UNIPHIER_SSCOQM_CE | operation, |
| data->op_base + UNIPHIER_SSCOQM); |
| |
| /* set address range if needed */ |
| if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) { |
| writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD); |
| writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ); |
| } |
| |
| /* set target ways if needed */ |
| if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation))) |
| writel_relaxed(data->way_locked_mask, |
| data->op_base + UNIPHIER_SSCOQWN); |
| } while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) & |
| (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE))); |
| |
| /* wait until the operation is completed */ |
| while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) != |
| UNIPHIER_SSCOLPQS_EF)) |
| cpu_relax(); |
| |
| local_irq_restore(flags); |
| } |
| |
| static void __uniphier_cache_maint_all(struct uniphier_cache_data *data, |
| u32 operation) |
| { |
| __uniphier_cache_maint_common(data, 0, 0, |
| UNIPHIER_SSCOQM_S_ALL | operation); |
| |
| __uniphier_cache_sync(data); |
| } |
| |
| static void __uniphier_cache_maint_range(struct uniphier_cache_data *data, |
| unsigned long start, unsigned long end, |
| u32 operation) |
| { |
| unsigned long size; |
| |
| /* |
| * If the start address is not aligned, |
| * perform a cache operation for the first cache-line |
| */ |
| start = start & ~(data->line_size - 1); |
| |
| size = end - start; |
| |
| if (unlikely(size >= (unsigned long)(-data->line_size))) { |
| /* this means cache operation for all range */ |
| __uniphier_cache_maint_all(data, operation); |
| return; |
| } |
| |
| /* |
| * If the end address is not aligned, |
| * perform a cache operation for the last cache-line |
| */ |
| size = ALIGN(size, data->line_size); |
| |
| while (size) { |
| unsigned long chunk_size = min_t(unsigned long, size, |
| data->range_op_max_size); |
| |
| __uniphier_cache_maint_common(data, start, chunk_size, |
| UNIPHIER_SSCOQM_S_RANGE | operation); |
| |
| start += chunk_size; |
| size -= chunk_size; |
| } |
| |
| __uniphier_cache_sync(data); |
| } |
| |
| static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on) |
| { |
| u32 val = 0; |
| |
| if (on) |
| val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON; |
| |
| writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC); |
| } |
| |
| static void __init __uniphier_cache_set_locked_ways( |
| struct uniphier_cache_data *data, |
| u32 way_mask) |
| { |
| data->way_locked_mask = way_mask & data->way_present_mask; |
| |
| writel_relaxed(~data->way_locked_mask & data->way_present_mask, |
| data->ctrl_base + UNIPHIER_SSCLPDAWCR); |
| } |
| |
| static void uniphier_cache_maint_range(unsigned long start, unsigned long end, |
| u32 operation) |
| { |
| struct uniphier_cache_data *data; |
| |
| list_for_each_entry(data, &uniphier_cache_list, list) |
| __uniphier_cache_maint_range(data, start, end, operation); |
| } |
| |
| static void uniphier_cache_maint_all(u32 operation) |
| { |
| struct uniphier_cache_data *data; |
| |
| list_for_each_entry(data, &uniphier_cache_list, list) |
| __uniphier_cache_maint_all(data, operation); |
| } |
| |
| static void uniphier_cache_inv_range(unsigned long start, unsigned long end) |
| { |
| uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV); |
| } |
| |
| static void uniphier_cache_clean_range(unsigned long start, unsigned long end) |
| { |
| uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN); |
| } |
| |
| static void uniphier_cache_flush_range(unsigned long start, unsigned long end) |
| { |
| uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH); |
| } |
| |
| static void __init uniphier_cache_inv_all(void) |
| { |
| uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV); |
| } |
| |
| static void uniphier_cache_flush_all(void) |
| { |
| uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH); |
| } |
| |
| static void uniphier_cache_disable(void) |
| { |
| struct uniphier_cache_data *data; |
| |
| list_for_each_entry_reverse(data, &uniphier_cache_list, list) |
| __uniphier_cache_enable(data, false); |
| |
| uniphier_cache_flush_all(); |
| } |
| |
| static void __init uniphier_cache_enable(void) |
| { |
| struct uniphier_cache_data *data; |
| |
| uniphier_cache_inv_all(); |
| |
| list_for_each_entry(data, &uniphier_cache_list, list) { |
| __uniphier_cache_enable(data, true); |
| __uniphier_cache_set_locked_ways(data, 0); |
| } |
| } |
| |
| static void uniphier_cache_sync(void) |
| { |
| struct uniphier_cache_data *data; |
| |
| list_for_each_entry(data, &uniphier_cache_list, list) |
| __uniphier_cache_sync(data); |
| } |
| |
| int __init uniphier_cache_l2_is_enabled(void) |
| { |
| struct uniphier_cache_data *data; |
| |
| data = list_first_entry_or_null(&uniphier_cache_list, |
| struct uniphier_cache_data, list); |
| if (!data) |
| return 0; |
| |
| return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) & |
| UNIPHIER_SSCC_ON); |
| } |
| |
| void __init uniphier_cache_l2_touch_range(unsigned long start, |
| unsigned long end) |
| { |
| struct uniphier_cache_data *data; |
| |
| data = list_first_entry_or_null(&uniphier_cache_list, |
| struct uniphier_cache_data, list); |
| if (data) |
| __uniphier_cache_maint_range(data, start, end, |
| UNIPHIER_SSCOQM_TID_WAY | |
| UNIPHIER_SSCOQM_CM_TOUCH); |
| } |
| |
| void __init uniphier_cache_l2_set_locked_ways(u32 way_mask) |
| { |
| struct uniphier_cache_data *data; |
| |
| data = list_first_entry_or_null(&uniphier_cache_list, |
| struct uniphier_cache_data, list); |
| if (data) |
| __uniphier_cache_set_locked_ways(data, way_mask); |
| } |
| |
| static const struct of_device_id uniphier_cache_match[] __initconst = { |
| { |
| .compatible = "socionext,uniphier-system-cache", |
| }, |
| { /* sentinel */ } |
| }; |
| |
| static struct device_node * __init uniphier_cache_get_next_level_node( |
| struct device_node *np) |
| { |
| u32 phandle; |
| |
| if (of_property_read_u32(np, "next-level-cache", &phandle)) |
| return NULL; |
| |
| return of_find_node_by_phandle(phandle); |
| } |
| |
| static int __init __uniphier_cache_init(struct device_node *np, |
| unsigned int *cache_level) |
| { |
| struct uniphier_cache_data *data; |
| u32 level, cache_size; |
| struct device_node *next_np; |
| int ret = 0; |
| |
| if (!of_match_node(uniphier_cache_match, np)) { |
| pr_err("L%d: not compatible with uniphier cache\n", |
| *cache_level); |
| return -EINVAL; |
| } |
| |
| if (of_property_read_u32(np, "cache-level", &level)) { |
| pr_err("L%d: cache-level is not specified\n", *cache_level); |
| return -EINVAL; |
| } |
| |
| if (level != *cache_level) { |
| pr_err("L%d: cache-level is unexpected value %d\n", |
| *cache_level, level); |
| return -EINVAL; |
| } |
| |
| if (!of_property_read_bool(np, "cache-unified")) { |
| pr_err("L%d: cache-unified is not specified\n", *cache_level); |
| return -EINVAL; |
| } |
| |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| if (of_property_read_u32(np, "cache-line-size", &data->line_size) || |
| !is_power_of_2(data->line_size)) { |
| pr_err("L%d: cache-line-size is unspecified or invalid\n", |
| *cache_level); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (of_property_read_u32(np, "cache-sets", &data->nsets) || |
| !is_power_of_2(data->nsets)) { |
| pr_err("L%d: cache-sets is unspecified or invalid\n", |
| *cache_level); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (of_property_read_u32(np, "cache-size", &cache_size) || |
| cache_size == 0 || cache_size % (data->nsets * data->line_size)) { |
| pr_err("L%d: cache-size is unspecified or invalid\n", |
| *cache_level); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| data->way_present_mask = |
| ((u32)1 << cache_size / data->nsets / data->line_size) - 1; |
| |
| data->ctrl_base = of_iomap(np, 0); |
| if (!data->ctrl_base) { |
| pr_err("L%d: failed to map control register\n", *cache_level); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| data->rev_base = of_iomap(np, 1); |
| if (!data->rev_base) { |
| pr_err("L%d: failed to map revision register\n", *cache_level); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| data->op_base = of_iomap(np, 2); |
| if (!data->op_base) { |
| pr_err("L%d: failed to map operation register\n", *cache_level); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| if (*cache_level == 2) { |
| u32 revision = readl(data->rev_base + UNIPHIER_SSCID); |
| /* |
| * The size of range operation is limited to (1 << 22) or less |
| * for PH-sLD8 or older SoCs. |
| */ |
| if (revision <= 0x16) |
| data->range_op_max_size = (u32)1 << 22; |
| } |
| |
| data->range_op_max_size -= data->line_size; |
| |
| INIT_LIST_HEAD(&data->list); |
| list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */ |
| |
| /* |
| * OK, this level has been successfully initialized. Look for the next |
| * level cache. Do not roll back even if the initialization of the |
| * next level cache fails because we want to continue with available |
| * cache levels. |
| */ |
| next_np = uniphier_cache_get_next_level_node(np); |
| if (next_np) { |
| (*cache_level)++; |
| ret = __uniphier_cache_init(next_np, cache_level); |
| } |
| of_node_put(next_np); |
| |
| return ret; |
| err: |
| iounmap(data->op_base); |
| iounmap(data->rev_base); |
| iounmap(data->ctrl_base); |
| kfree(data); |
| |
| return ret; |
| } |
| |
| int __init uniphier_cache_init(void) |
| { |
| struct device_node *np = NULL; |
| unsigned int cache_level; |
| int ret = 0; |
| |
| /* look for level 2 cache */ |
| while ((np = of_find_matching_node(np, uniphier_cache_match))) |
| if (!of_property_read_u32(np, "cache-level", &cache_level) && |
| cache_level == 2) |
| break; |
| |
| if (!np) |
| return -ENODEV; |
| |
| ret = __uniphier_cache_init(np, &cache_level); |
| of_node_put(np); |
| |
| if (ret) { |
| /* |
| * Error out iif L2 initialization fails. Continue with any |
| * error on L3 or outer because they are optional. |
| */ |
| if (cache_level == 2) { |
| pr_err("failed to initialize L2 cache\n"); |
| return ret; |
| } |
| |
| cache_level--; |
| ret = 0; |
| } |
| |
| outer_cache.inv_range = uniphier_cache_inv_range; |
| outer_cache.clean_range = uniphier_cache_clean_range; |
| outer_cache.flush_range = uniphier_cache_flush_range; |
| outer_cache.flush_all = uniphier_cache_flush_all; |
| outer_cache.disable = uniphier_cache_disable; |
| outer_cache.sync = uniphier_cache_sync; |
| |
| uniphier_cache_enable(); |
| |
| pr_info("enabled outer cache (cache level: %d)\n", cache_level); |
| |
| return ret; |
| } |