| /* |
| * madera-micsupp.c -- Driver for the mic supply regulator on Madera codecs |
| * |
| * Copyright 2015-2016 Cirrus Logic |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| #include <sound/soc.h> |
| |
| #include <linux/regulator/madera-micsupp.h> |
| |
| #include <linux/mfd/madera/core.h> |
| #include <linux/mfd/madera/pdata.h> |
| #include <linux/mfd/madera/registers.h> |
| |
| struct madera_micsupp { |
| struct regulator_dev *regulator; |
| struct madera *madera; |
| |
| struct regulator_consumer_supply supply; |
| struct regulator_init_data init_data; |
| |
| struct work_struct check_cp_work; |
| }; |
| |
| static void madera_micsupp_check_cp(struct work_struct *work) |
| { |
| struct madera_micsupp *micsupp = |
| container_of(work, struct madera_micsupp, check_cp_work); |
| struct snd_soc_dapm_context *dapm = micsupp->madera->dapm; |
| struct madera *madera = micsupp->madera; |
| struct regmap *regmap = madera->regmap; |
| unsigned int reg; |
| int ret; |
| |
| if (dapm) { |
| ret = regmap_read(regmap, MADERA_MIC_CHARGE_PUMP_1, ®); |
| if (ret) { |
| dev_err(madera->dev, |
| "Failed to read CP state: %d\n", ret); |
| return; |
| } |
| |
| if ((reg & (MADERA_CPMIC_ENA | MADERA_CPMIC_BYPASS)) == |
| MADERA_CPMIC_ENA) { |
| snd_soc_dapm_force_enable_pin(dapm, "MICSUPP"); |
| madera->micvdd_regulated = true; |
| } else { |
| snd_soc_dapm_disable_pin(dapm, "MICSUPP"); |
| madera->micvdd_regulated = false; |
| } |
| |
| snd_soc_dapm_sync(dapm); |
| } |
| } |
| |
| static int madera_micsupp_enable(struct regulator_dev *rdev) |
| { |
| struct madera_micsupp *micsupp = rdev_get_drvdata(rdev); |
| int ret; |
| |
| ret = regulator_enable_regmap(rdev); |
| |
| if (ret == 0) |
| schedule_work(&micsupp->check_cp_work); |
| |
| return ret; |
| } |
| |
| static int madera_micsupp_disable(struct regulator_dev *rdev) |
| { |
| struct madera_micsupp *micsupp = rdev_get_drvdata(rdev); |
| int ret; |
| |
| ret = regulator_disable_regmap(rdev); |
| if (ret == 0) |
| schedule_work(&micsupp->check_cp_work); |
| |
| return ret; |
| } |
| |
| static int madera_micsupp_set_bypass(struct regulator_dev *rdev, bool ena) |
| { |
| struct madera_micsupp *micsupp = rdev_get_drvdata(rdev); |
| int ret; |
| |
| ret = regulator_set_bypass_regmap(rdev, ena); |
| udelay(1000); |
| if (ret == 0) |
| schedule_work(&micsupp->check_cp_work); |
| |
| return ret; |
| } |
| |
| static const struct regulator_ops madera_micsupp_ops = { |
| .enable = madera_micsupp_enable, |
| .disable = madera_micsupp_disable, |
| .is_enabled = regulator_is_enabled_regmap, |
| |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| |
| .get_bypass = regulator_get_bypass_regmap, |
| .set_bypass = madera_micsupp_set_bypass, |
| }; |
| |
| static const struct regulator_linear_range madera_micsupp_ranges[] = { |
| REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000), |
| REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000), |
| }; |
| |
| static const struct regulator_desc madera_micsupp = { |
| .name = "MICVDD", |
| .supply_name = "CPVDD1", |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = 40, |
| .ops = &madera_micsupp_ops, |
| |
| .vsel_reg = MADERA_LDO2_CONTROL_1, |
| .vsel_mask = MADERA_LDO2_VSEL_MASK, |
| .enable_reg = MADERA_MIC_CHARGE_PUMP_1, |
| .enable_mask = MADERA_CPMIC_ENA, |
| .bypass_reg = MADERA_MIC_CHARGE_PUMP_1, |
| .bypass_mask = MADERA_CPMIC_BYPASS, |
| |
| .linear_ranges = madera_micsupp_ranges, |
| .n_linear_ranges = ARRAY_SIZE(madera_micsupp_ranges), |
| |
| .enable_time = 3000, |
| |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct regulator_init_data madera_micsupp_default = { |
| .constraints = { |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS | |
| REGULATOR_CHANGE_VOLTAGE | |
| REGULATOR_CHANGE_BYPASS, |
| .min_uV = 900000, |
| .max_uV = 3300000, |
| }, |
| |
| .num_consumer_supplies = 1, |
| }; |
| |
| static int madera_micsupp_of_get_pdata(struct madera *madera, |
| struct regulator_config *config, |
| const struct regulator_desc *desc) |
| { |
| struct madera_pdata *pdata = &madera->pdata; |
| struct madera_micsupp *micsupp = config->driver_data; |
| struct device_node *np; |
| struct regulator_init_data *init_data; |
| |
| np = of_get_child_by_name(madera->dev->of_node, "micvdd"); |
| |
| if (np) { |
| config->of_node = np; |
| |
| init_data = of_get_regulator_init_data(madera->dev, np, desc); |
| |
| if (init_data) { |
| init_data->consumer_supplies = &micsupp->supply; |
| init_data->num_consumer_supplies = 1; |
| |
| pdata->micsupp.init_data = init_data; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int madera_get_max_micbias(struct madera *madera) |
| { |
| unsigned int num_micbias, i, micbias_mv; |
| unsigned int max_micbias = 0; |
| int ret; |
| |
| madera_get_num_micbias(madera, &num_micbias); |
| |
| for (i = 0; i < num_micbias; i++) { |
| ret = regmap_read(madera->regmap, MADERA_MIC_BIAS_CTRL_1 + i, |
| &micbias_mv); |
| if (ret) { |
| dev_err(madera->dev, |
| "Failed to read micbias level: %d\n", ret); |
| return 0; |
| } |
| |
| micbias_mv = (micbias_mv & MADERA_MICB1_LVL_MASK) >> |
| MADERA_MICB1_LVL_SHIFT; |
| micbias_mv = 1500 + (100 * micbias_mv); |
| |
| if (micbias_mv > max_micbias) |
| max_micbias = micbias_mv; |
| } |
| |
| return max_micbias * 1000; |
| } |
| |
| static int madera_micsupp_probe(struct platform_device *pdev) |
| { |
| struct madera *madera = dev_get_drvdata(pdev->dev.parent); |
| const struct regulator_desc *desc; |
| struct regulator_config config = { }; |
| struct madera_micsupp *micsupp; |
| int ret; |
| unsigned int max_micbias; |
| |
| micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL); |
| if (!micsupp) |
| return -ENOMEM; |
| |
| micsupp->madera = madera; |
| INIT_WORK(&micsupp->check_cp_work, madera_micsupp_check_cp); |
| |
| /* |
| * Since the chip usually supplies itself we provide some |
| * default init_data for it. This will be overridden with |
| * platform data if provided. |
| */ |
| desc = &madera_micsupp; |
| micsupp->init_data = madera_micsupp_default; |
| |
| micsupp->init_data.consumer_supplies = &micsupp->supply; |
| micsupp->supply.supply = "MICVDD"; |
| micsupp->supply.dev_name = dev_name(madera->dev); |
| |
| config.dev = madera->dev; |
| config.driver_data = micsupp; |
| config.regmap = madera->regmap; |
| |
| if (IS_ENABLED(CONFIG_OF)) { |
| if (!dev_get_platdata(madera->dev)) { |
| ret = madera_micsupp_of_get_pdata(madera, &config, |
| desc); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| max_micbias = madera_get_max_micbias(madera); |
| if (max_micbias) { |
| /* micvdd must be 200mV more than maximum micbias */ |
| max_micbias += 200000; |
| if (micsupp->init_data.constraints.max_uV >= max_micbias) { |
| micsupp->init_data.constraints.max_uV = max_micbias; |
| micsupp->init_data.constraints.min_uV = max_micbias; |
| micsupp->init_data.constraints.apply_uV = true; |
| micsupp->init_data.constraints.valid_ops_mask &= |
| ~REGULATOR_CHANGE_VOLTAGE; |
| } |
| } |
| |
| if (madera->pdata.micsupp.init_data) |
| config.init_data = madera->pdata.micsupp.init_data; |
| else |
| config.init_data = &micsupp->init_data; |
| |
| if (max_micbias) { |
| if (config.init_data->constraints.max_uV < max_micbias) |
| dev_err(madera->dev, |
| "micvdd must be atleast set to %duV\n", |
| max_micbias); |
| } |
| |
| /* Default to bypassed mode */ |
| regmap_update_bits(madera->regmap, MADERA_MIC_CHARGE_PUMP_1, |
| MADERA_CPMIC_BYPASS, MADERA_CPMIC_BYPASS); |
| |
| micsupp->regulator = devm_regulator_register(&pdev->dev, desc, |
| &config); |
| |
| of_node_put(config.of_node); |
| |
| if (IS_ERR(micsupp->regulator)) { |
| ret = PTR_ERR(micsupp->regulator); |
| dev_err(madera->dev, "Failed to register mic supply: %d\n", |
| ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, micsupp); |
| |
| return 0; |
| } |
| |
| static struct platform_driver madera_micsupp_driver = { |
| .probe = madera_micsupp_probe, |
| .driver = { |
| .name = "madera-micsupp", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(madera_micsupp_driver); |
| |
| /* Module information */ |
| MODULE_DESCRIPTION("Madera microphone supply driver"); |
| MODULE_AUTHOR("Charles Keepax <ckeepax@opensource.wolfsonmicro.com>"); |
| MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:madera-micsupp"); |