| /* |
| * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III |
| * |
| * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. |
| * |
| * see flexcop.c for copyright information. |
| */ |
| #include "flexcop.h" |
| |
| #include "stv0299.h" |
| #include "mt352.h" |
| #include "nxt2002.h" |
| #include "bcm3510.h" |
| #include "stv0297.h" |
| #include "mt312.h" |
| |
| /* lnb control */ |
| |
| static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) |
| { |
| struct flexcop_device *fc = fe->dvb->priv; |
| flexcop_ibi_value v; |
| deb_tuner("polarity/voltage = %u\n", voltage); |
| |
| v = fc->read_ibi_reg(fc, misc_204); |
| switch (voltage) { |
| case SEC_VOLTAGE_OFF: |
| v.misc_204.ACPI1_sig = 1; |
| break; |
| case SEC_VOLTAGE_13: |
| v.misc_204.ACPI1_sig = 0; |
| v.misc_204.LNB_L_H_sig = 0; |
| break; |
| case SEC_VOLTAGE_18: |
| v.misc_204.ACPI1_sig = 0; |
| v.misc_204.LNB_L_H_sig = 1; |
| break; |
| default: |
| err("unknown SEC_VOLTAGE value"); |
| return -EINVAL; |
| } |
| return fc->write_ibi_reg(fc, misc_204, v); |
| } |
| |
| static int flexcop_sleep(struct dvb_frontend* fe) |
| { |
| struct flexcop_device *fc = fe->dvb->priv; |
| /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ |
| |
| if (fc->fe_sleep) |
| return fc->fe_sleep(fe); |
| |
| /* v.misc_204.ACPI3_sig = 1; |
| fc->write_ibi_reg(fc,misc_204,v);*/ |
| |
| return 0; |
| } |
| |
| static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) |
| { |
| /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ |
| struct flexcop_device *fc = fe->dvb->priv; |
| flexcop_ibi_value v; |
| u16 ax; |
| v.raw = 0; |
| |
| deb_tuner("tone = %u\n",tone); |
| |
| switch (tone) { |
| case SEC_TONE_ON: |
| ax = 0x01ff; |
| break; |
| case SEC_TONE_OFF: |
| ax = 0; |
| break; |
| default: |
| err("unknown SEC_TONE value"); |
| return -EINVAL; |
| } |
| |
| v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ |
| |
| v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; |
| v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; |
| |
| return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); |
| } |
| |
| static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) |
| { |
| flexcop_set_tone(fe, SEC_TONE_ON); |
| udelay(data ? 500 : 1000); |
| flexcop_set_tone(fe, SEC_TONE_OFF); |
| udelay(data ? 1000 : 500); |
| } |
| |
| static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) |
| { |
| int i, par = 1, d; |
| |
| for (i = 7; i >= 0; i--) { |
| d = (data >> i) & 1; |
| par ^= d; |
| flexcop_diseqc_send_bit(fe, d); |
| } |
| |
| flexcop_diseqc_send_bit(fe, par); |
| } |
| |
| static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) |
| { |
| int i; |
| |
| flexcop_set_tone(fe, SEC_TONE_OFF); |
| mdelay(16); |
| |
| for (i = 0; i < len; i++) |
| flexcop_diseqc_send_byte(fe,msg[i]); |
| |
| mdelay(16); |
| |
| if (burst != -1) { |
| if (burst) |
| flexcop_diseqc_send_byte(fe, 0xff); |
| else { |
| flexcop_set_tone(fe, SEC_TONE_ON); |
| udelay(12500); |
| flexcop_set_tone(fe, SEC_TONE_OFF); |
| } |
| msleep(20); |
| } |
| return 0; |
| } |
| |
| static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) |
| { |
| return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); |
| } |
| |
| static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) |
| { |
| return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); |
| } |
| |
| /* dvb-s stv0299 */ |
| static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) |
| { |
| u8 aclk = 0; |
| u8 bclk = 0; |
| |
| if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } |
| else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } |
| else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } |
| else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } |
| else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } |
| else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } |
| |
| stv0299_writereg (fe, 0x13, aclk); |
| stv0299_writereg (fe, 0x14, bclk); |
| stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); |
| stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); |
| stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); |
| |
| return 0; |
| } |
| |
| static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| { |
| u8 buf[4]; |
| u32 div; |
| struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; |
| struct flexcop_device *fc = fe->dvb->priv; |
| |
| div = params->frequency / 125; |
| |
| buf[0] = (div >> 8) & 0x7f; |
| buf[1] = div & 0xff; |
| buf[2] = 0x84; /* 0xC4 */ |
| buf[3] = 0x08; |
| |
| if (params->frequency < 1500000) buf[3] |= 0x10; |
| |
| if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) |
| return -EIO; |
| return 0; |
| } |
| |
| static u8 samsung_tbmu24112_inittab[] = { |
| 0x01, 0x15, |
| 0x02, 0x30, |
| 0x03, 0x00, |
| 0x04, 0x7D, |
| 0x05, 0x35, |
| 0x06, 0x02, |
| 0x07, 0x00, |
| 0x08, 0xC3, |
| 0x0C, 0x00, |
| 0x0D, 0x81, |
| 0x0E, 0x23, |
| 0x0F, 0x12, |
| 0x10, 0x7E, |
| 0x11, 0x84, |
| 0x12, 0xB9, |
| 0x13, 0x88, |
| 0x14, 0x89, |
| 0x15, 0xC9, |
| 0x16, 0x00, |
| 0x17, 0x5C, |
| 0x18, 0x00, |
| 0x19, 0x00, |
| 0x1A, 0x00, |
| 0x1C, 0x00, |
| 0x1D, 0x00, |
| 0x1E, 0x00, |
| 0x1F, 0x3A, |
| 0x20, 0x2E, |
| 0x21, 0x80, |
| 0x22, 0xFF, |
| 0x23, 0xC1, |
| 0x28, 0x00, |
| 0x29, 0x1E, |
| 0x2A, 0x14, |
| 0x2B, 0x0F, |
| 0x2C, 0x09, |
| 0x2D, 0x05, |
| 0x31, 0x1F, |
| 0x32, 0x19, |
| 0x33, 0xFE, |
| 0x34, 0x93, |
| 0xff, 0xff, |
| }; |
| |
| static struct stv0299_config samsung_tbmu24112_config = { |
| .demod_address = 0x68, |
| .inittab = samsung_tbmu24112_inittab, |
| .mclk = 88000000UL, |
| .invert = 0, |
| .enhanced_tuning = 0, |
| .skip_reinit = 0, |
| .lock_output = STV0229_LOCKOUTPUT_LK, |
| .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, |
| .pll_set = samsung_tbmu24112_pll_set, |
| }; |
| |
| /* dvb-t mt352 */ |
| static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) |
| { |
| static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; |
| static u8 mt352_reset [] = { 0x50, 0x80 }; |
| static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; |
| static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; |
| static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; |
| |
| mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); |
| udelay(2000); |
| mt352_write(fe, mt352_reset, sizeof(mt352_reset)); |
| mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); |
| |
| mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); |
| mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); |
| |
| return 0; |
| } |
| |
| static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) |
| { |
| u32 div; |
| unsigned char bs = 0; |
| |
| #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ |
| div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; |
| |
| if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; |
| if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; |
| if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; |
| |
| pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */ |
| pllbuf[1] = div >> 8; |
| pllbuf[2] = div & 0xff; |
| pllbuf[3] = 0xcc; |
| pllbuf[4] = bs; |
| |
| return 0; |
| } |
| |
| static struct mt352_config samsung_tdtc9251dh0_config = { |
| .demod_address = 0x0f, |
| .demod_init = samsung_tdtc9251dh0_demod_init, |
| .pll_set = samsung_tdtc9251dh0_pll_set, |
| }; |
| |
| static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) |
| { |
| struct flexcop_device *fc = fe->dvb->priv; |
| return request_firmware(fw, name, fc->dev); |
| } |
| |
| static struct nxt2002_config samsung_tbmv_config = { |
| .demod_address = 0x0a, |
| .request_firmware = flexcop_fe_request_firmware, |
| }; |
| |
| static struct bcm3510_config air2pc_atsc_first_gen_config = { |
| .demod_address = 0x0f, |
| .request_firmware = flexcop_fe_request_firmware, |
| }; |
| |
| static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| { |
| u8 buf[4]; |
| u32 div; |
| struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; |
| struct flexcop_device *fc = fe->dvb->priv; |
| |
| div = (params->frequency + (125/2)) / 125; |
| |
| buf[0] = (div >> 8) & 0x7f; |
| buf[1] = (div >> 0) & 0xff; |
| buf[2] = 0x84 | ((div >> 10) & 0x60); |
| buf[3] = 0x80; |
| |
| if (params->frequency < 1550000) |
| buf[3] |= 0x02; |
| |
| if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) |
| return -EIO; |
| return 0; |
| } |
| |
| static struct mt312_config skystar23_samsung_tbdu18132_config = { |
| |
| .demod_address = 0x0e, |
| .pll_set = skystar23_samsung_tbdu18132_pll_set, |
| }; |
| |
| static struct stv0297_config alps_tdee4_stv0297_config = { |
| .demod_address = 0x1c, |
| // .invert = 1, |
| // .pll_set = alps_tdee4_stv0297_pll_set, |
| }; |
| |
| /* try to figure out the frontend, each card/box can have on of the following list */ |
| int flexcop_frontend_init(struct flexcop_device *fc) |
| { |
| /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ |
| if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) { |
| fc->fe->ops->set_voltage = flexcop_set_voltage; |
| |
| fc->fe_sleep = fc->fe->ops->sleep; |
| fc->fe->ops->sleep = flexcop_sleep; |
| |
| fc->dev_type = FC_SKY; |
| info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address); |
| } else |
| /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ |
| if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) { |
| fc->dev_type = FC_AIR_DVB; |
| info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); |
| } else |
| /* try the air atsc 2nd generation (nxt2002) */ |
| if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { |
| fc->dev_type = FC_AIR_ATSC2; |
| info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); |
| } else |
| /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ |
| if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) { |
| fc->dev_type = FC_AIR_ATSC1; |
| info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address); |
| } else |
| /* try the cable dvb (stv0297) */ |
| if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) { |
| fc->dev_type = FC_CABLE; |
| info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); |
| } else |
| /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ |
| if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { |
| fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; |
| fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst; |
| fc->fe->ops->set_tone = flexcop_set_tone; |
| fc->fe->ops->set_voltage = flexcop_set_voltage; |
| |
| fc->fe_sleep = fc->fe->ops->sleep; |
| fc->fe->ops->sleep = flexcop_sleep; |
| |
| fc->dev_type = FC_SKY_OLD; |
| info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address); |
| } |
| |
| if (fc->fe == NULL) { |
| err("no frontend driver found for this B2C2/FlexCop adapter"); |
| return -ENODEV; |
| } else { |
| if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { |
| err("frontend registration failed!"); |
| if (fc->fe->ops->release != NULL) |
| fc->fe->ops->release(fc->fe); |
| fc->fe = NULL; |
| return -EINVAL; |
| } |
| } |
| fc->init_state |= FC_STATE_FE_INIT; |
| return 0; |
| } |
| |
| void flexcop_frontend_exit(struct flexcop_device *fc) |
| { |
| if (fc->init_state & FC_STATE_FE_INIT) |
| dvb_unregister_frontend(fc->fe); |
| |
| fc->init_state &= ~FC_STATE_FE_INIT; |
| } |