| /* |
| * max77865_charger.c |
| * Samsung max77865 Charger Driver |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #define DEBUG |
| |
| #include <linux/mfd/max77865-private.h> |
| #if defined(CONFIG_BATTERY_NOTIFIER) |
| #include <linux/battery/battery_notifier.h> |
| #endif |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/power_supply.h> |
| #include <linux/mfd/max77865.h> |
| #include <linux/of_gpio.h> |
| #include "include/charger/max77865_charger.h" |
| #ifdef CONFIG_USB_HOST_NOTIFY |
| #include <linux/usb_notify.h> |
| #endif |
| |
| #define ENABLE 1 |
| #define DISABLE 0 |
| |
| #if defined(CONFIG_SEC_FACTORY) |
| #define WC_CURRENT_WORK_STEP 250 |
| #else |
| #define WC_CURRENT_WORK_STEP 1000 |
| #endif |
| |
| extern unsigned int lpcharge; |
| |
| static enum power_supply_property max77865_charger_props[] = { |
| }; |
| |
| static enum power_supply_property max77865_otg_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| }; |
| |
| static struct device_attribute max77865_charger_attrs[] = { |
| MAX77865_CHARGER_ATTR(chip_id), |
| MAX77865_CHARGER_ATTR(data), |
| }; |
| |
| static void max77865_charger_initialize(struct max77865_charger_data *charger); |
| static int max77865_get_vbus_state(struct max77865_charger_data *charger); |
| static int max77865_get_charger_state(struct max77865_charger_data *charger); |
| static void max77865_set_charger_state(struct max77865_charger_data *charger, |
| int enable); |
| static void max77865_enable_aicl_irq(struct max77865_charger_data *charger); |
| static bool max77865_charger_unlock(struct max77865_charger_data *charger) |
| { |
| u8 reg_data; |
| u8 chgprot; |
| int retry_cnt = 0; |
| bool need_init = false; |
| |
| do { |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_06, ®_data); |
| chgprot = ((reg_data & 0x0C) >> 2); |
| if (chgprot != 0x03) { |
| pr_err("%s: unlock err, chgprot(0x%x), retry(%d)\n", |
| __func__, chgprot, retry_cnt); |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_06, |
| (0x03 << 2), (0x03 << 2)); |
| need_init = true; |
| msleep(20); |
| } else { |
| pr_debug("%s: unlock success, chgprot(0x%x)\n", |
| __func__, chgprot); |
| break; |
| } |
| } while ((chgprot != 0x03) && (++retry_cnt < 10)); |
| |
| return need_init; |
| } |
| |
| static void check_charger_unlock_state(struct max77865_charger_data *charger) |
| { |
| bool need_reg_init; |
| pr_debug("%s\n", __func__); |
| |
| need_reg_init = max77865_charger_unlock(charger); |
| if (need_reg_init) { |
| pr_err("%s: charger locked state, reg init\n", __func__); |
| max77865_charger_initialize(charger); |
| } |
| } |
| |
| static void max77865_test_read(struct max77865_charger_data *charger) |
| { |
| u8 data = 0; |
| u32 addr = 0; |
| char str[1024]={0,}; |
| |
| for (addr = 0xB1; addr <= 0xC3; addr++) { |
| max77865_read_reg(charger->i2c, addr, &data); |
| sprintf(str + strlen(str), "[0x%02x]0x%02x, ", addr, data); |
| } |
| pr_info("max77865 : %s\n", str); |
| } |
| |
| static int max77865_get_vbus_state(struct max77865_charger_data *charger) |
| { |
| u8 reg_data; |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_00, ®_data); |
| |
| if (is_wireless_type(charger->cable_type)) |
| reg_data = ((reg_data & MAX77865_WCIN_DTLS) >> |
| MAX77865_WCIN_DTLS_SHIFT); |
| else |
| reg_data = ((reg_data & MAX77865_CHGIN_DTLS) >> |
| MAX77865_CHGIN_DTLS_SHIFT); |
| |
| switch (reg_data) { |
| case 0x00: |
| pr_info("%s: VBUS is invalid. CHGIN < CHGIN_UVLO\n", |
| __func__); |
| break; |
| case 0x01: |
| pr_info("%s: VBUS is invalid. CHGIN < MBAT+CHGIN2SYS" \ |
| "and CHGIN > CHGIN_UVLO\n", __func__); |
| break; |
| case 0x02: |
| pr_info("%s: VBUS is invalid. CHGIN > CHGIN_OVLO", |
| __func__); |
| break; |
| case 0x03: |
| pr_info("%s: VBUS is valid. CHGIN < CHGIN_OVLO", __func__); |
| break; |
| default: |
| break; |
| } |
| |
| return reg_data; |
| } |
| |
| static int max77865_get_charger_state(struct max77865_charger_data *charger) |
| { |
| int status = POWER_SUPPLY_STATUS_UNKNOWN; |
| u8 reg_data; |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_01, ®_data); |
| |
| pr_info("%s : charger status (0x%02x)\n", __func__, reg_data); |
| |
| reg_data &= 0x0f; |
| |
| switch (reg_data) |
| { |
| case 0x00: |
| case 0x01: |
| case 0x02: |
| status = POWER_SUPPLY_STATUS_CHARGING; |
| break; |
| case 0x03: |
| case 0x04: |
| status = POWER_SUPPLY_STATUS_FULL; |
| break; |
| case 0x05: |
| case 0x06: |
| case 0x07: |
| status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| break; |
| case 0x08: |
| case 0xA: |
| case 0xB: |
| status = POWER_SUPPLY_STATUS_DISCHARGING; |
| break; |
| default: |
| status = POWER_SUPPLY_STATUS_UNKNOWN; |
| break; |
| } |
| |
| return (int)status; |
| } |
| |
| static bool max77865_is_constant_current(struct max77865_charger_data *charger) |
| { |
| u8 reg_data; |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_01, ®_data); |
| pr_info("%s : charger status (0x%02x)\n", __func__, reg_data); |
| reg_data &= 0x0f; |
| |
| if (reg_data == 0x01) |
| return true; |
| return false; |
| } |
| |
| static void max77865_set_float_voltage(struct max77865_charger_data *charger, int float_voltage) |
| { |
| u8 reg_data = 0; |
| |
| reg_data = float_voltage <= 40500 ? 0x0 : |
| float_voltage >= 45000 ? 0x24 : |
| (float_voltage - 40500) / 125; |
| |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_04, |
| (reg_data << CHG_CNFG_04_CHG_CV_PRM_SHIFT), |
| CHG_CNFG_04_CHG_CV_PRM_MASK); |
| |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_04, ®_data); |
| pr_info("%s: battery cv voltage 0x%x\n", __func__, reg_data); |
| } |
| |
| static int max77865_get_float_voltage(struct max77865_charger_data *charger) |
| { |
| u8 reg_data = 0; |
| int float_voltage; |
| |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_04, ®_data); |
| reg_data &= 0x3F; |
| float_voltage = reg_data * 125 + 40500; |
| pr_debug("%s: battery cv reg : 0x%x, float voltage val : %d\n", |
| __func__, reg_data, float_voltage); |
| |
| return float_voltage; |
| } |
| static int max77865_get_charging_health(struct max77865_charger_data *charger) |
| { |
| int state = POWER_SUPPLY_HEALTH_GOOD; |
| int vbus_state; |
| int retry_cnt; |
| u8 chg_dtls, reg_data; |
| u8 chg_cnfg_00; |
| union power_supply_propval value; |
| |
| /* watchdog kick */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_06, |
| MAX77865_WDTCLR, MAX77865_WDTCLR); |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_01, ®_data); |
| reg_data = ((reg_data & MAX77865_BAT_DTLS) >> MAX77865_BAT_DTLS_SHIFT); |
| |
| pr_info("%s: reg_data(0x%x)\n", __func__, reg_data); |
| switch (reg_data) { |
| case 0x00: |
| pr_info("%s: No battery and the charger is suspended\n", |
| __func__); |
| break; |
| case 0x01: |
| pr_info("%s: battery is okay " |
| "but its voltage is low(~VPQLB)\n", __func__); |
| break; |
| case 0x02: |
| pr_info("%s: battery dead\n", __func__); |
| break; |
| case 0x03: |
| break; |
| case 0x04: |
| pr_info("%s: battery is okay" \ |
| "but its voltage is low\n", __func__); |
| break; |
| case 0x05: |
| pr_info("%s: battery ovp\n", __func__); |
| break; |
| default: |
| pr_info("%s: battery unknown\n", __func__); |
| break; |
| } |
| |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| /* VBUS OVP state return battery OVP state */ |
| vbus_state = max77865_get_vbus_state(charger); |
| /* read CHG_DTLS and detecting battery terminal error */ |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_01, &chg_dtls); |
| chg_dtls = ((chg_dtls & MAX77865_CHG_DTLS) >> |
| MAX77865_CHG_DTLS_SHIFT); |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_00, &chg_cnfg_00); |
| |
| /* print the log at the abnormal case */ |
| if((charger->is_charging == 1) && ((chg_dtls == 0x08) || (chg_dtls == 0x0B))) { |
| max77865_test_read(charger); |
| max77865_set_charger_state(charger, DISABLE); |
| max77865_set_float_voltage(charger, charger->float_voltage); |
| max77865_set_charger_state(charger, ENABLE); |
| } |
| |
| pr_info("%s: vbus_state : 0x%x, chg_dtls : 0x%x\n", __func__, vbus_state, chg_dtls); |
| /* OVP is higher priority */ |
| if (vbus_state == 0x02) { /* CHGIN_OVLO */ |
| pr_info("%s: vbus ovp\n", __func__); |
| state = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| if (is_wireless_type(charger->cable_type)) { |
| retry_cnt = 0; |
| do { |
| msleep(50); |
| vbus_state = max77865_get_vbus_state(charger); |
| } while((retry_cnt++ < 2) && (vbus_state == 0x02)); |
| if (vbus_state == 0x02) { |
| state = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| pr_info("%s: wpc and over-voltage\n", __func__); |
| } else |
| state = POWER_SUPPLY_HEALTH_GOOD; |
| } |
| } else if (((vbus_state == 0x0) || (vbus_state == 0x01)) && (chg_dtls & 0x08) && \ |
| (chg_cnfg_00 & MAX77865_MODE_BUCK) && \ |
| (chg_cnfg_00 & MAX77865_MODE_CHGR) && \ |
| is_not_wireless_type(charger->cable_type)) { |
| pr_info("%s: vbus is under\n", __func__); |
| state = POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| } else if ((value.intval == POWER_SUPPLY_HEALTH_UNDERVOLTAGE) && \ |
| ((vbus_state == 0x0) || (vbus_state == 0x01)) && \ |
| is_not_wireless_type(charger->cable_type)) { |
| pr_info("%s: keep under-voltage\n", __func__); |
| state = POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| } |
| |
| return (int)state; |
| } |
| |
| static int max77865_get_charge_current(struct max77865_charger_data *charger) |
| { |
| u8 reg_data; |
| int get_current = 0; |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_02, ®_data); |
| reg_data &= MAX77865_CHG_CC; |
| |
| get_current = reg_data <= 0x2 ? 100 : reg_data * 50; |
| |
| return get_current; |
| } |
| |
| static int max77865_get_input_current_type(struct max77865_charger_data *charger, |
| int cable_type) |
| { |
| u8 reg_data; |
| int get_current = 0; |
| |
| if (cable_type == SEC_BATTERY_CABLE_WIRELESS) { |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_10, ®_data); |
| /* AND operation for removing the formal 2bit */ |
| reg_data &= 0x3F; |
| |
| if (reg_data <= 0x4) |
| get_current = 100; |
| else if (reg_data >= 0x3F) |
| get_current = 1575; |
| else |
| get_current = reg_data * 25; |
| } else { |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_09, ®_data); |
| /* AND operation for removing the formal 1bit */ |
| reg_data &= 0x7F; |
| |
| if (reg_data <= 0x4) |
| get_current = 100; |
| else if (reg_data >= 0x7F) |
| get_current = 3175; |
| else |
| get_current = reg_data * 25; |
| } |
| |
| return get_current; |
| } |
| |
| static int max77865_get_input_current(struct max77865_charger_data *charger) |
| { |
| if (is_wireless_type(charger->cable_type)) |
| return max77865_get_input_current_type(charger, SEC_BATTERY_CABLE_WIRELESS); |
| else |
| return max77865_get_input_current_type(charger, SEC_BATTERY_CABLE_TA); |
| } |
| |
| static void reduce_input_current(struct max77865_charger_data *charger, int cur) |
| { |
| u8 set_reg, set_value; |
| unsigned int input_curr_limit_step = 25; |
| |
| if (is_wireless_type(charger->cable_type)) { |
| set_reg = MAX77865_CHG_REG_CNFG_10; |
| } else { |
| set_reg = MAX77865_CHG_REG_CNFG_09; |
| } |
| |
| if (!max77865_read_reg(charger->i2c, set_reg, &set_value)) { |
| if (set_value <= (MINIMUM_INPUT_CURRENT / input_curr_limit_step) || |
| set_value <= (cur / input_curr_limit_step)) |
| return; |
| set_value -= (cur / input_curr_limit_step); |
| set_value = (set_value < (MINIMUM_INPUT_CURRENT / input_curr_limit_step)) ? |
| (MINIMUM_INPUT_CURRENT / input_curr_limit_step) : set_value; |
| max77865_write_reg(charger->i2c, set_reg, set_value); |
| pr_info("%s: set current: reg:(0x%x), val:(0x%x)\n", |
| __func__, set_reg, set_value); |
| charger->input_current = max77865_get_input_current(charger); |
| charger->aicl_on = true; |
| } |
| } |
| |
| static bool max77865_check_battery(struct max77865_charger_data *charger) |
| { |
| u8 reg_data; |
| u8 reg_data2; |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_OK, ®_data); |
| |
| pr_info("%s : CHG_INT_OK(0x%x)\n", __func__, reg_data); |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_00, ®_data2); |
| |
| pr_info("%s : CHG_DETAILS00(0x%x)\n", __func__, reg_data2); |
| |
| if ((reg_data & MAX77865_BATP_OK) || |
| !(reg_data2 & MAX77865_BATP_DTLS)) |
| return true; |
| else |
| return false; |
| } |
| |
| static void max77865_set_buck(struct max77865_charger_data *charger, |
| int enable) |
| { |
| u8 reg_data; |
| |
| if (enable) { |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| CHG_CNFG_00_BUCK_MASK, CHG_CNFG_00_BUCK_MASK); |
| } else { |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| 0, CHG_CNFG_00_BUCK_MASK); |
| } |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, ®_data); |
| pr_info("%s : CHG_CNFG_00(0x%02x)\n", __func__, reg_data); |
| } |
| |
| static void max77865_change_charge_path(struct max77865_charger_data *charger, |
| int path) |
| { |
| u8 cnfg12; |
| |
| if (is_wireless_type(path)) { |
| cnfg12 = (0 << CHG_CNFG_12_CHGINSEL_SHIFT); |
| } else { |
| cnfg12 = (1 << CHG_CNFG_12_CHGINSEL_SHIFT); |
| } |
| |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_12, |
| cnfg12, CHG_CNFG_12_CHGINSEL_MASK); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_12, &cnfg12); |
| pr_info("%s : CHG_CNFG_12(0x%02x)\n", __func__, cnfg12); |
| } |
| |
| static void max77865_set_input_current(struct max77865_charger_data *charger, |
| int input_current) |
| { |
| int curr_step = 25; |
| u8 set_reg, reg_data; |
| |
| mutex_lock(&charger->charger_mutex); |
| if (is_wireless_type(charger->cable_type)) { |
| set_reg = MAX77865_CHG_REG_CNFG_10; |
| max77865_read_reg(charger->i2c, |
| set_reg, ®_data); |
| reg_data &= ~MAX77865_CHG_WCIN_LIM; |
| } else { |
| set_reg = MAX77865_CHG_REG_CNFG_09; |
| max77865_read_reg(charger->i2c, |
| set_reg, ®_data); |
| reg_data &= ~MAX77865_CHG_CHGIN_LIM; |
| } |
| |
| if (!input_current) { |
| max77865_write_reg(charger->i2c, |
| set_reg, reg_data); |
| } else if (is_wireless_type(charger->cable_type)) { |
| input_current = (input_current > 1575) ? 1575 : input_current; |
| reg_data |= (input_current / curr_step); |
| max77865_write_reg(charger->i2c, set_reg, reg_data); |
| } else { |
| input_current = (input_current > 3175) ? 3175 : input_current; |
| reg_data |= (input_current / curr_step); |
| max77865_write_reg(charger->i2c, |
| set_reg, reg_data); |
| } |
| |
| mutex_unlock(&charger->charger_mutex); |
| pr_info("[%s] REG(0x%02x) DATA(0x%02x), CURRENT(%d)\n", |
| __func__, set_reg, reg_data, input_current); |
| } |
| |
| static void max77865_set_charge_current(struct max77865_charger_data *charger, |
| int fast_charging_current) |
| { |
| int curr_step = 50; |
| u8 reg_data; |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_02, ®_data); |
| reg_data &= ~MAX77865_CHG_CC; |
| |
| if (!fast_charging_current) { |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_02, reg_data); |
| } else { |
| fast_charging_current = (fast_charging_current > 3150) ? 3150 : fast_charging_current; |
| reg_data |= (fast_charging_current / curr_step); |
| max77865_write_reg(charger->i2c, MAX77865_CHG_REG_CNFG_02, reg_data); |
| } |
| |
| pr_info("[%s] REG(0x%02x) DATA(0x%02x), CURRENT(%d)\n", |
| __func__, MAX77865_CHG_REG_CNFG_02, |
| reg_data, fast_charging_current); |
| } |
| |
| static void max77865_set_wireless_input_current(struct max77865_charger_data *charger, |
| int input_current) |
| { |
| union power_supply_propval value; |
| |
| wake_lock(&charger->wc_current_wake_lock); |
| if (is_wireless_type(charger->cable_type)) { |
| /* Wcurr-A) In cases of wireless input current change, |
| configure the Vrect adj room to 270mV for safe wireless charging. */ |
| wake_lock(&charger->wc_current_wake_lock); |
| value.intval = WIRELESS_VRECT_ADJ_ROOM_1; /* 270mV */ |
| psy_do_property(charger->pdata->wireless_charger_name, set, |
| POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION, value); |
| msleep(500); /* delay 0.5sec */ |
| charger->wc_pre_current = max77865_get_input_current(charger); |
| charger->wc_current = input_current; |
| if (charger->wc_current > charger->wc_pre_current) { |
| max77865_set_charge_current(charger, charger->charging_current); |
| } |
| } |
| queue_delayed_work(charger->wqueue, &charger->wc_current_work, 0); |
| } |
| |
| static void max77865_set_topoff_current(struct max77865_charger_data *charger, |
| int termination_current) |
| { |
| int curr_base = 150, curr_step = 50; |
| u8 reg_data; |
| |
| if (termination_current < curr_base) |
| termination_current = curr_base; |
| else if (termination_current > 500) |
| termination_current = 500; |
| |
| reg_data = (termination_current - curr_base) / curr_step; |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_03, |
| reg_data, MAX77865_CHG_TO_ITH); |
| |
| pr_info("%s: reg_data(0x%02x), topoff(%dmA)\n", |
| __func__, reg_data, termination_current); |
| } |
| |
| static void max77865_set_charger_state(struct max77865_charger_data *charger, |
| int enable) |
| { |
| u8 cnfg_00, cnfg_12; |
| |
| if (enable) { |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| CHG_CNFG_00_CHG_MASK, CHG_CNFG_00_CHG_MASK); |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_12, |
| 0x1, CHG_CNFG_12_DISSKIP); |
| } else { |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| 0, CHG_CNFG_00_CHG_MASK); |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_12, |
| 0x0, CHG_CNFG_12_DISSKIP); |
| } |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, &cnfg_00); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_12, &cnfg_12); |
| pr_info("%s : CHG_CNFG_00(0x%02x), CHG_CNFG_12(0x%02x)\n", __func__, cnfg_00, cnfg_12); |
| } |
| |
| static void max77865_set_otg(struct max77865_charger_data *charger, int enable) |
| { |
| union power_supply_propval value; |
| u8 reg = 0; |
| static u8 chg_int_state; |
| |
| pr_info("%s: CHGIN-OTG %s\n", __func__, enable > 0 ? "on" : "off"); |
| if (charger->otg_on == enable || lpcharge) |
| return; |
| |
| wake_lock(&charger->otg_wake_lock); |
| mutex_lock(&charger->charger_mutex); |
| /* CHGIN-OTG */ |
| value.intval = enable; |
| if (enable) { |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL, value); |
| |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_MASK, |
| &chg_int_state); |
| |
| /* disable charger interrupt: CHG_I, CHGIN_I */ |
| /* enable charger interrupt: BYP_I */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_INT_MASK, |
| MAX77865_CHG_IM | MAX77865_CHGIN_IM, |
| MAX77865_CHG_IM | MAX77865_CHGIN_IM | MAX77865_BYP_IM); |
| |
| /* Update CHG_CNFG_11 to 0x16(5.020V) */ |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_11, 0x16); |
| if (charger->enable_boost_mode_wa) { |
| /* OTG off, boost on */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| (CHG_CNFG_00_BOOST_MASK | CHG_CNFG_00_CHG_MASK), CHG_CNFG_00_MODE_MASK); |
| msleep(100); |
| /* OTG on, boost on */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| (CHG_CNFG_00_BOOST_MASK | CHG_CNFG_00_OTG_MASK), CHG_CNFG_00_MODE_MASK); |
| } else { |
| /* OTG off, boost on */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| CHG_CNFG_00_BOOST_MASK, CHG_CNFG_00_OTG_CTRL); |
| msleep(100); |
| /* OTG on, boost on */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| CHG_CNFG_00_OTG_CTRL, CHG_CNFG_00_OTG_CTRL); |
| } |
| } else { |
| /* OTG off(UNO on), boost off */ |
| if (charger->enable_boost_mode_wa) { |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| CHG_CNFG_00_BUCK_MASK, CHG_CNFG_00_MODE_MASK); |
| } else { |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| 0, CHG_CNFG_00_OTG_CTRL); |
| } |
| |
| /* Update CHG_CNFG_11 to 0x00(3.485V) */ |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_11, 0x00); |
| msleep(50); |
| |
| /* enable charger interrupt */ |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, chg_int_state); |
| |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL, value); |
| } |
| charger->otg_on = enable; |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_MASK, |
| &chg_int_state); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| ®); |
| mutex_unlock(&charger->charger_mutex); |
| wake_unlock(&charger->otg_wake_lock); |
| pr_info("%s: INT_MASK(0x%x), CHG_CNFG_00(0x%x)\n", |
| __func__, chg_int_state, reg); |
| power_supply_changed(charger->psy_otg); |
| } |
| |
| static void max77865_charger_initialize(struct max77865_charger_data *charger) |
| { |
| u8 reg_data; |
| int jig_gpio; |
| pr_info("%s\n", __func__); |
| |
| /* unmasked: CHGIN_I, WCIN_I, BATP_I, BYP_I */ |
| /*max77865_write_reg(charger->i2c, max77865_CHG_REG_INT_MASK, 0x9a);*/ |
| |
| /* unlock charger setting protect |
| * slowest LX slope |
| */ |
| reg_data = (0x03 << 2); |
| reg_data |= 0x60; |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_06, reg_data, reg_data); |
| |
| /* |
| * fast charge timer disable |
| * restart threshold disable |
| * pre-qual charge disable |
| */ |
| reg_data = (0x03 << 4); |
| reg_data |= 0x08; |
| max77865_write_reg(charger->i2c, MAX77865_CHG_REG_CNFG_01, reg_data); |
| |
| /* |
| * charge current 450mA(default) |
| * otg current limit 1500mA |
| */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_02, 0xC0, 0xC0); |
| |
| /* BAT to SYS OCP 4.50A */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_05, charger->vsys_ocp, 0x07); |
| |
| /* Junction Temperature Thermal Regulation Loop Set point (130'C) */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_07, 0x78, 0x78); |
| |
| /* |
| * top off current 150mA |
| * top off timer 30min |
| */ |
| reg_data = 0x18; |
| max77865_write_reg(charger->i2c, MAX77865_CHG_REG_CNFG_03, reg_data); |
| |
| /* |
| * cv voltage 4.3V or 4.35V |
| */ |
| max77865_set_float_voltage(charger, charger->pdata->chg_float_voltage); |
| |
| /* |
| * VCHGIN & WCHGIN regulation threshold set 4.3v, uvlo 4.5V |
| * Auto skip mode |
| */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_12, |
| 0x12, CHG_CNFG_12_VCHGIN_REG_MASK|CHG_CNFG_12_WCIN_REG_MASK); |
| |
| /* Boost mode possible in FACTORY MODE */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_07, |
| MAX77865_CHG_FMBST, CHG_CNFG_07_REG_FMBST_MASK); |
| |
| if (charger->jig_low_active) |
| jig_gpio = !gpio_get_value(charger->jig_gpio); |
| else |
| jig_gpio = gpio_get_value(charger->jig_gpio); |
| |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_07, |
| (jig_gpio << CHG_CNFG_07_REG_FGSRC_SHIFT), |
| CHG_CNFG_07_REG_FGSRC_MASK); |
| |
| /* Watchdog Enable */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| MAX77865_WDTEN, MAX77865_WDTEN); |
| |
| /* Active Discharge Enable */ |
| max77865_update_reg(charger->pmic_i2c, MAX77865_PMIC_REG_MAINCTRL1, |
| 0x01, 0x01); |
| |
| //max77865_test_read(charger); |
| } |
| |
| static void max77865_set_sysovlo(struct max77865_charger_data *charger, int enable) |
| { |
| u8 reg_data; |
| |
| max77865_read_reg(charger->pmic_i2c, MAX77865_PMIC_REG_SYSTEM_INT_MASK, ®_data); |
| if (enable) { |
| reg_data = reg_data & 0xDF; |
| } else { |
| reg_data = reg_data | 0x20; |
| } |
| max77865_write_reg(charger->pmic_i2c, MAX77865_PMIC_REG_SYSTEM_INT_MASK, reg_data); |
| |
| max77865_read_reg(charger->pmic_i2c, MAX77865_PMIC_REG_SYSTEM_INT_MASK, ®_data); |
| pr_info("%s: check topsys irq mask(0x%x), enable(%d)\n", __func__, reg_data, enable); |
| } |
| |
| static int max77865_chg_create_attrs(struct device *dev) |
| { |
| int i, rc; |
| |
| for (i = 0; i < ARRAY_SIZE(max77865_charger_attrs); i++) { |
| rc = device_create_file(dev, &max77865_charger_attrs[i]); |
| if (rc) |
| goto create_attrs_failed; |
| } |
| return rc; |
| |
| create_attrs_failed: |
| dev_err(dev, "%s: failed (%d)\n", __func__, rc); |
| while (i--) |
| device_remove_file(dev, &max77865_charger_attrs[i]); |
| return rc; |
| } |
| |
| ssize_t max77865_chg_show_attrs(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct max77865_charger_data *charger = power_supply_get_drvdata(psy); |
| const ptrdiff_t offset = attr - max77865_charger_attrs; |
| int i = 0; |
| u8 addr, data; |
| |
| switch(offset) { |
| case CHIP_ID: |
| max77865_read_reg(charger->pmic_i2c, MAX77865_PMIC_REG_PMICID1, &data); |
| i += scnprintf(buf + i, PAGE_SIZE - i, "%x\n", data); |
| break; |
| case DATA: |
| for (addr = 0xB1; addr <= 0xC3; addr++) { |
| max77865_read_reg(charger->i2c, addr, &data); |
| i += scnprintf(buf + i, PAGE_SIZE - i, "0x%02x : 0x%02x\n", addr, data); |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| return i; |
| } |
| |
| ssize_t max77865_chg_store_attrs(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct max77865_charger_data *charger = power_supply_get_drvdata(psy); |
| const ptrdiff_t offset = attr - max77865_charger_attrs; |
| int ret = 0; |
| int x,y; |
| |
| switch(offset) { |
| case CHIP_ID: |
| ret = count; |
| break; |
| case DATA: |
| if (sscanf(buf, "0x%8x 0x%8x", &x, &y) == 2) { |
| if (x >= 0xB1 && x <= 0xC3) { |
| u8 addr = x; |
| u8 data = y; |
| if (max77865_write_reg(charger->i2c, addr, data) < 0) { |
| dev_info(charger->dev, |
| "%s: addr: 0x%x write fail\n", __func__, addr); |
| } |
| } else { |
| dev_info(charger->dev, |
| "%s: addr: 0x%x is wrong\n", __func__, x); |
| } |
| } |
| ret = count; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| return ret; |
| } |
| |
| static int max77865_chg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct max77865_charger_data *charger = power_supply_get_drvdata(psy); |
| u8 reg_data; |
| enum power_supply_ext_property ext_psp = psp; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = SEC_BATTERY_CABLE_NONE; |
| if (max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_OK, ®_data) == 0) { |
| if (reg_data & MAX77865_WCIN_OK) { |
| val->intval = SEC_BATTERY_CABLE_WIRELESS; |
| charger->wc_w_state = 1; |
| } else if (reg_data & MAX77865_CHGIN_OK) { |
| val->intval = SEC_BATTERY_CABLE_TA; |
| } |
| } |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = max77865_check_battery(charger); |
| break; |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = max77865_get_charger_state(charger); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| if (!charger->is_charging) |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; |
| else |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| val->intval = max77865_get_charging_health(charger); |
| max77865_test_read(charger); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| val->intval = charger->input_current; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| if (is_wireless_type(val->intval)) |
| val->intval = max77865_get_input_current_type(charger, SEC_BATTERY_CABLE_WIRELESS); |
| else |
| val->intval = max77865_get_input_current_type(charger, SEC_BATTERY_CABLE_TA); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = charger->charging_current; |
| break; |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| val->intval = max77865_get_charge_current(charger); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| val->intval = max77865_get_float_voltage(charger); |
| break; |
| #if defined(CONFIG_AFC_CHARGER_MODE) |
| case POWER_SUPPLY_PROP_AFC_CHARGER_MODE: |
| return -ENODATA; |
| #endif |
| case POWER_SUPPLY_PROP_CHARGE_NOW: |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_01, ®_data); |
| reg_data &= 0x0F; |
| switch (reg_data) { |
| case 0x01: |
| val->strval = "CC Mode"; |
| break; |
| case 0x02: |
| val->strval = "CV Mode"; |
| break; |
| case 0x03: |
| val->strval = "EOC"; |
| break; |
| case 0x04: |
| val->strval = "DONE"; |
| break; |
| default: |
| val->strval = "NONE"; |
| break; |
| } |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL: |
| mutex_lock(&charger->charger_mutex); |
| val->intval = charger->otg_on; |
| mutex_unlock(&charger->charger_mutex); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_COUNTER_SHADOW: |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_UNO_CONTROL: |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| ®_data); |
| if ((reg_data & CHG_CNFG_00_UNO_CTRL) == CHG_CNFG_00_BOOST_MASK) |
| val->intval = 1; |
| else |
| val->intval = 0; |
| break; |
| case POWER_SUPPLY_PROP_USB_HC: |
| return -ENODATA; |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| if (max77865_is_constant_current(charger)) { |
| val->intval = 0; |
| } else { |
| val->intval = 1; |
| } |
| break; |
| case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX: |
| switch (ext_psp) { |
| case POWER_SUPPLY_EXT_PROP_CHIP_ID: |
| if (max77865_read_reg(charger->i2c, MAX77865_PMIC_REG_PMICREV, ®_data) == 0) { |
| val->intval = (charger->pmic_ver >= 0x1 && charger->pmic_ver <= 0x03); |
| pr_info("%s : IF PMIC ver.0x%x\n", __func__, charger->pmic_ver); |
| } else { |
| val->intval = 0; |
| pr_info("%s : IF PMIC I2C fail.\n", __func__); |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| #if defined(CONFIG_UPDATE_BATTERY_DATA) |
| static int max77865_charger_parse_dt(struct max77865_charger_data *charger); |
| #endif |
| static int max77865_chg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct max77865_charger_data *charger = power_supply_get_drvdata(psy); |
| u8 reg = 0; |
| static u8 chg_int_state; |
| int buck_state = ENABLE; |
| enum power_supply_ext_property ext_psp = psp; |
| |
| switch (psp) { |
| /* val->intval : type */ |
| case POWER_SUPPLY_PROP_STATUS: |
| charger->status = val->intval; |
| break; |
| case POWER_SUPPLY_PROP_CHARGING_ENABLED: |
| /* check boost mode bit */ |
| if ((charger->enable_boost_mode_wa) && |
| (max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, ®) == 0) && |
| (reg & CHG_CNFG_00_BOOST_MASK)) { |
| pr_info("%s: prevent charging mode when boost mode is on(reg:0x%x).\n", |
| __func__, reg); |
| break; |
| } |
| |
| charger->charge_mode = val->intval; |
| switch (charger->charge_mode) { |
| case SEC_BAT_CHG_MODE_BUCK_OFF: |
| buck_state = DISABLE; |
| case SEC_BAT_CHG_MODE_CHARGING_OFF: |
| charger->is_charging = false; |
| break; |
| case SEC_BAT_CHG_MODE_CHARGING: |
| charger->is_charging = true; |
| break; |
| } |
| max77865_set_buck(charger, buck_state); |
| max77865_set_charger_state(charger, charger->is_charging); |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| charger->cable_type = val->intval; |
| charger->aicl_on = false; |
| charger->input_current = max77865_get_input_current(charger); |
| max77865_change_charge_path(charger, charger->cable_type); |
| if (charger->cable_type == SEC_BATTERY_CABLE_NONE) { |
| charger->wc_pre_current = WC_CURRENT_START; |
| wake_unlock(&charger->wpc_wake_lock); |
| cancel_delayed_work(&charger->wpc_work); |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, 0, MAX77865_WCIN_IM); |
| if (charger->enable_sysovlo_irq) { |
| max77865_set_sysovlo(charger, 1); |
| } |
| /* Enable AICL IRQ */ |
| if (charger->irq_aicl_enabled == 0) { |
| u8 reg_data; |
| charger->irq_aicl_enabled = 1; |
| enable_irq(charger->irq_aicl); |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, ®_data); |
| pr_info("%s : enable aicl : 0x%x\n", __func__, reg_data); |
| } |
| } else if (is_hv_wire_type(charger->cable_type) || |
| (charger->cable_type == SEC_BATTERY_CABLE_HV_TA_CHG_LIMIT)) { |
| /* Disable AICL IRQ */ |
| if (charger->irq_aicl_enabled == 1) { |
| u8 reg_data; |
| charger->irq_aicl_enabled = 0; |
| disable_irq_nosync(charger->irq_aicl); |
| cancel_delayed_work(&charger->aicl_work); |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, ®_data); |
| pr_info("%s : disable aicl : 0x%x\n", __func__, reg_data); |
| charger->aicl_on = false; |
| } |
| } |
| break; |
| /* val->intval : input charging current */ |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| { |
| int input_current = val->intval; |
| if (is_wireless_type(charger->cable_type)) { |
| max77865_set_wireless_input_current(charger, input_current); |
| } else { |
| max77865_set_input_current(charger, input_current); |
| } |
| if (charger->cable_type == SEC_BATTERY_CABLE_NONE) |
| max77865_set_wireless_input_current(charger, input_current); |
| charger->input_current = input_current; |
| } |
| break; |
| /* val->intval : charging current */ |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| charger->charging_current = val->intval; |
| max77865_set_charge_current(charger, |
| val->intval); |
| break; |
| /* val->intval : charging current */ |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| charger->charging_current = val->intval; |
| if (is_not_wireless_type(charger->cable_type)) { |
| max77865_set_charge_current(charger, charger->charging_current); |
| } |
| break; |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_FULL: |
| max77865_set_topoff_current(charger, val->intval); |
| break; |
| #if defined(CONFIG_AFC_CHARGER_MODE) |
| case POWER_SUPPLY_PROP_AFC_CHARGER_MODE: |
| #if defined(CONFIG_MUIC_HV) |
| max77865_hv_muic_charger_init(); |
| #endif |
| break; |
| #endif |
| #if defined(CONFIG_BATTERY_SWELLING) |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| charger->float_voltage = val->intval; |
| pr_info("%s: float voltage(%d)\n", __func__, val->intval); |
| max77865_set_float_voltage(charger, val->intval); |
| break; |
| #endif |
| case POWER_SUPPLY_PROP_USB_HC: |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| /* if jig attached, change the power source |
| from the VBATFG to the internal VSYS*/ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_07, |
| (val->intval << CHG_CNFG_07_REG_FGSRC_SHIFT), |
| CHG_CNFG_07_REG_FGSRC_MASK); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_COUNTER_SHADOW: |
| charger->otg_on = false; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL: |
| max77865_set_otg(charger, val->intval); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_UNO_CONTROL: |
| pr_info("%s: WCIN-UNO %s\n", __func__, val->intval > 0 ? "on" : "off"); |
| /* WCIN-UNO */ |
| if (val->intval) { |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_MASK, |
| &chg_int_state); |
| |
| /* disable charger interrupt: CHG_I, CHGIN_I */ |
| /* enable charger interrupt: BYP_I */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_INT_MASK, |
| MAX77865_CHG_IM | MAX77865_CHGIN_IM, |
| MAX77865_CHG_IM | MAX77865_CHGIN_IM | MAX77865_BYP_IM); |
| |
| /* UNO on, boost on */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| CHG_CNFG_00_BOOST_MASK, CHG_CNFG_00_UNO_CTRL); |
| |
| /* Update CHG_CNFG_11 to 0x16(5.020V) */ |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_11, 0x16); |
| } else { |
| /* boost off*/ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| 0, CHG_CNFG_00_BOOST_MASK); |
| |
| /* Update CHG_CNFG_11 to 0x00(3.485V) */ |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_11, 0x00); |
| msleep(50); |
| |
| /* enable charger interrupt */ |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, chg_int_state); |
| } |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_MASK, |
| &chg_int_state); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_00, |
| ®); |
| pr_info("%s: INT_MASK(0x%x), CHG_CNFG_00(0x%x)\n", |
| __func__, chg_int_state, reg); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: |
| max77865_enable_aicl_irq(charger); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_OK, ®); |
| if (reg & MAX77865_AICL_I) |
| queue_delayed_work(charger->wqueue, &charger->aicl_work, msecs_to_jiffies(50)); |
| break; |
| #if defined(CONFIG_UPDATE_BATTERY_DATA) |
| case POWER_SUPPLY_PROP_POWER_DESIGN: |
| max77865_charger_parse_dt(charger); |
| break; |
| #endif |
| case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX: |
| switch (ext_psp) { |
| case POWER_SUPPLY_EXT_PROP_SURGE: |
| if (val->intval) { |
| pr_info("%s : Charger IC reset by surge. charger re-initialize\n", __func__); |
| check_charger_unlock_state(charger); |
| } |
| break; |
| case POWER_SUPPLY_EXT_PROP_INBAT_VOLTAGE_FGSRC_SWITCHING: |
| /* if jig attached, change the power source |
| from the VBATFG to the internal VSYS*/ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_07, |
| (val->intval << CHG_CNFG_07_REG_FGSRC_SHIFT), |
| CHG_CNFG_07_REG_FGSRC_MASK); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_CNFG_07, ®); |
| pr_info("%s: POWER_SUPPLY_EXT_PROP_INBAT_VOLTAGE_FGSRC_SWITCHING: reg(0x%x) val(0x%x)\n", |
| __func__, MAX77865_CHG_REG_CNFG_07, reg); |
| break; |
| case POWER_SUPPLY_EXT_PROP_WD_QBATTOFF: |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_07, |
| ((!!(val->intval)) << CHG_CNFG_07_REG_WD_QBATTOFF_SHIFT), |
| CHG_CNFG_07_REG_WD_QBATTOFF_MASK); |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int max77865_otg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct max77865_charger_data *charger = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| mutex_lock(&charger->charger_mutex); |
| val->intval = charger->otg_on; |
| mutex_unlock(&charger->charger_mutex); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int max77865_otg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct max77865_charger_data *charger = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| max77865_set_otg(charger, val->intval); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int max77865_debugfs_show(struct seq_file *s, void *data) |
| { |
| struct max77865_charger_data *charger = s->private; |
| u8 reg; |
| u8 reg_data; |
| |
| seq_printf(s, "MAX77865 CHARGER IC :\n"); |
| seq_printf(s, "===================\n"); |
| for (reg = 0xB0; reg <= 0xC3; reg++) { |
| max77865_read_reg(charger->i2c, reg, ®_data); |
| seq_printf(s, "0x%02x:\t0x%02x\n", reg, reg_data); |
| } |
| |
| seq_printf(s, "\n"); |
| return 0; |
| } |
| |
| static int max77865_debugfs_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, max77865_debugfs_show, inode->i_private); |
| } |
| |
| static const struct file_operations max77865_debugfs_fops = { |
| .open = max77865_debugfs_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static void max77865_chg_isr_work(struct work_struct *work) |
| { |
| struct max77865_charger_data *charger = |
| container_of(work, struct max77865_charger_data, isr_work.work); |
| |
| union power_supply_propval val; |
| |
| if (charger->pdata->full_check_type == |
| SEC_BATTERY_FULLCHARGED_CHGINT) { |
| |
| val.intval = max77865_get_charger_state(charger); |
| |
| switch (val.intval) { |
| case POWER_SUPPLY_STATUS_DISCHARGING: |
| pr_err("%s: Interrupted but Discharging\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_STATUS_NOT_CHARGING: |
| pr_err("%s: Interrupted but NOT Charging\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_STATUS_FULL: |
| pr_info("%s: Interrupted by Full\n", __func__); |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_STATUS, val); |
| break; |
| |
| case POWER_SUPPLY_STATUS_CHARGING: |
| pr_err("%s: Interrupted but Charging\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_STATUS_UNKNOWN: |
| default: |
| pr_err("%s: Invalid Charger Status\n", __func__); |
| break; |
| } |
| } |
| |
| if (charger->pdata->ovp_uvlo_check_type == |
| SEC_BATTERY_OVP_UVLO_CHGINT) { |
| val.intval = max77865_get_charging_health(charger); |
| switch (val.intval) { |
| case POWER_SUPPLY_HEALTH_OVERHEAT: |
| case POWER_SUPPLY_HEALTH_COLD: |
| pr_err("%s: Interrupted but Hot/Cold\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_DEAD: |
| pr_err("%s: Interrupted but Dead\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_OVERVOLTAGE: |
| case POWER_SUPPLY_HEALTH_UNDERVOLTAGE: |
| pr_info("%s: Interrupted by OVP/UVLO\n", __func__); |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, val); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: |
| pr_err("%s: Interrupted but Unspec\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_GOOD: |
| pr_err("%s: Interrupted but Good\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_UNKNOWN: |
| default: |
| pr_err("%s: Invalid Charger Health\n", __func__); |
| break; |
| } |
| } |
| } |
| |
| static irqreturn_t max77865_chg_irq_thread(int irq, void *irq_data) |
| { |
| struct max77865_charger_data *charger = irq_data; |
| |
| pr_info("%s: Charger interrupt occured\n", __func__); |
| |
| if ((charger->pdata->full_check_type == |
| SEC_BATTERY_FULLCHARGED_CHGINT) || |
| (charger->pdata->ovp_uvlo_check_type == |
| SEC_BATTERY_OVP_UVLO_CHGINT)) |
| schedule_delayed_work(&charger->isr_work, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* If we have external wireless TRx, enable WCIN interrupt to detect Mis-align only */ |
| static void wpc_detect_work(struct work_struct *work) |
| { |
| struct max77865_charger_data *charger = container_of(work, |
| struct max77865_charger_data, |
| wpc_work.work); |
| |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, 0, MAX77865_WCIN_IM); |
| |
| if (is_wireless_type(charger->cable_type)) { |
| u8 reg_data, wcin_state, wcin_dtls, wcin_cnt = 0; |
| do { |
| wcin_cnt++; |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_OK, |
| ®_data); |
| wcin_state = (reg_data & MAX77865_WCIN_OK) >> MAX77865_WCIN_OK_SHIFT; |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_DETAILS_00, |
| ®_data); |
| wcin_dtls = (reg_data & MAX77865_WCIN_DTLS) >> MAX77865_WCIN_DTLS_SHIFT; |
| if (!wcin_state && !wcin_dtls && wcin_cnt >= 2) { |
| union power_supply_propval value; |
| pr_info("%s: invalid WCIN, Misalign occurs!\n", __func__); |
| value.intval = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| psy_do_property(charger->pdata->wireless_charger_name, set, |
| POWER_SUPPLY_PROP_STATUS, value); |
| } |
| msleep(50); |
| } while (!wcin_state && !wcin_dtls && wcin_cnt < 2); |
| } |
| |
| /* Do unmask again. (for frequent wcin irq problem) */ |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, 0, MAX77865_WCIN_IM); |
| |
| wake_unlock(&charger->wpc_wake_lock); |
| } |
| |
| static irqreturn_t wpc_charger_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| |
| pr_info("%s: irq(%d)\n", __func__, irq); |
| |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_INT_MASK, |
| MAX77865_WCIN_IM, MAX77865_WCIN_IM); |
| wake_lock(&charger->wpc_wake_lock); |
| queue_delayed_work(charger->wqueue, &charger->wpc_work, msecs_to_jiffies(10000)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t max77865_batp_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| union power_supply_propval value; |
| u8 reg_data; |
| |
| pr_info("%s : irq(%d)\n", __func__, irq); |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, ®_data); |
| reg_data |= (1 << 2); |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, reg_data); |
| |
| check_charger_unlock_state(charger); |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_OK, |
| ®_data); |
| |
| if (!(reg_data & MAX77865_BATP_OK)) |
| psy_do_property("battery", set, POWER_SUPPLY_PROP_PRESENT, value); |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, ®_data); |
| reg_data &= ~(1 << 2); |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, reg_data); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| static irqreturn_t max77865_bypass_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| u8 dtls_02; |
| u8 byp_dtls; |
| u8 vbus_state; |
| #ifdef CONFIG_USB_HOST_NOTIFY |
| struct otg_notify *o_notify; |
| |
| o_notify = get_otg_notify(); |
| #endif |
| |
| pr_info("%s: irq(%d)\n", __func__, irq); |
| |
| /* check and unlock */ |
| check_charger_unlock_state(charger); |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_02, |
| &dtls_02); |
| |
| byp_dtls = ((dtls_02 & MAX77865_BYP_DTLS) >> |
| MAX77865_BYP_DTLS_SHIFT); |
| pr_info("%s: BYP_DTLS(0x%02x)\n", __func__, byp_dtls); |
| vbus_state = max77865_get_vbus_state(charger); |
| |
| if (byp_dtls & 0x1) { |
| union power_supply_propval val; |
| pr_info("%s: bypass overcurrent limit\n", __func__); |
| #ifdef CONFIG_USB_HOST_NOTIFY |
| if (o_notify) { |
| send_otg_notify(o_notify, NOTIFY_EVENT_OVERCURRENT, 0); |
| #ifdef CONFIG_USB_HW_PARAM |
| inc_hw_param(o_notify, USB_CCIC_OVC_COUNT); |
| #endif |
| } |
| #endif |
| /* disable the register values just related to OTG and |
| keep the values about the charging */ |
| val.intval = 0; |
| psy_do_property("otg", set, |
| POWER_SUPPLY_PROP_ONLINE, val); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static void max77865_aicl_isr_work(struct work_struct *work) |
| { |
| struct max77865_charger_data *charger = container_of(work, |
| struct max77865_charger_data, aicl_work.work); |
| u8 aicl_state, aicl_cnt = 0; |
| |
| pr_info("%s: \n", __func__); |
| |
| wake_lock(&charger->aicl_wake_lock); |
| mutex_lock(&charger->charger_mutex); |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, MAX77865_AICL_IM, MAX77865_AICL_IM); |
| /* check and unlock */ |
| check_charger_unlock_state(charger); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_OK, &aicl_state); |
| while (!(aicl_state & 0x80) && charger->cable_type != SEC_BATTERY_CABLE_NONE) { |
| if (++aicl_cnt >= 2) { |
| reduce_input_current(charger, REDUCE_CURRENT_STEP); |
| aicl_cnt = 0; |
| } |
| msleep(50); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_OK, &aicl_state); |
| if (max77865_get_input_current(charger) <= MINIMUM_INPUT_CURRENT) |
| break; |
| } |
| |
| if (charger->aicl_on) { |
| union power_supply_propval value; |
| value.intval = max77865_get_input_current(charger); |
| psy_do_property("battery", set, |
| POWER_SUPPLY_EXT_PROP_AICL_CURRENT, value); |
| } |
| |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, 0, MAX77865_AICL_IM); |
| mutex_unlock(&charger->charger_mutex); |
| wake_unlock(&charger->aicl_wake_lock); |
| } |
| |
| static irqreturn_t max77865_aicl_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| queue_delayed_work(charger->wqueue, &charger->aicl_work, msecs_to_jiffies(50)); |
| |
| pr_info("%s: irq(%d)\n", __func__, irq); |
| wake_unlock(&charger->wc_current_wake_lock); |
| cancel_delayed_work(&charger->wc_current_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void max77865_enable_aicl_irq(struct max77865_charger_data *charger) |
| { |
| int ret; |
| |
| ret = request_threaded_irq(charger->irq_aicl, NULL, |
| max77865_aicl_irq, 0, "aicl-irq", charger); |
| if (ret < 0) { |
| pr_err("%s: fail to request aicl IRQ: %d: %d\n", |
| __func__, charger->irq_aicl, ret); |
| charger->irq_aicl_enabled = -1; |
| } else { |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, 0, MAX77865_AICL_IM); |
| charger->irq_aicl_enabled = 1; |
| } |
| pr_info("%s enabled : %d\n", __func__, charger->irq_aicl_enabled); |
| } |
| |
| static void max77865_chgin_isr_work(struct work_struct *work) |
| { |
| struct max77865_charger_data *charger = container_of(work, |
| struct max77865_charger_data, chgin_work); |
| u8 chgin_dtls, chg_dtls, chg_cnfg_00; |
| u8 prev_chgin_dtls = 0xff; |
| int battery_health; |
| union power_supply_propval value; |
| int stable_count = 0; |
| |
| wake_lock(&charger->chgin_wake_lock); |
| |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, MAX77865_CHGIN_IM, MAX77865_CHGIN_IM); |
| |
| while (1) { |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| battery_health = value.intval; |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_00, |
| &chgin_dtls); |
| chgin_dtls = ((chgin_dtls & MAX77865_CHGIN_DTLS) >> |
| MAX77865_CHGIN_DTLS_SHIFT); |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_DETAILS_01, &chg_dtls); |
| chg_dtls = ((chg_dtls & MAX77865_CHG_DTLS) >> |
| MAX77865_CHG_DTLS_SHIFT); |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_00, &chg_cnfg_00); |
| |
| if (prev_chgin_dtls == chgin_dtls) |
| stable_count++; |
| else |
| stable_count = 0; |
| if (stable_count > 10) { |
| pr_info("%s: irq(%d), chgin(0x%x), chg_dtls(0x%x) prev 0x%x\n", |
| __func__, charger->irq_chgin, |
| chgin_dtls, chg_dtls, prev_chgin_dtls); |
| if (charger->is_charging) { |
| if ((chgin_dtls == 0x02) && \ |
| (battery_health != POWER_SUPPLY_HEALTH_OVERVOLTAGE)) { |
| pr_info("%s: charger is over voltage\n", |
| __func__); |
| value.intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| } else if (((chgin_dtls == 0x0) || (chgin_dtls == 0x01)) &&(chg_dtls & 0x08) && \ |
| (chg_cnfg_00 & MAX77865_MODE_BUCK) && \ |
| (chg_cnfg_00 & MAX77865_MODE_CHGR) && \ |
| (battery_health != POWER_SUPPLY_HEALTH_UNDERVOLTAGE) && \ |
| is_not_wireless_type(charger->cable_type)) { |
| pr_info("%s, vbus_state : 0x%d, chg_state : 0x%d\n", __func__, chgin_dtls, chg_dtls); |
| pr_info("%s: vBus is undervoltage\n", __func__); |
| value.intval = POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| } |
| } else { |
| if ((battery_health == \ |
| POWER_SUPPLY_HEALTH_OVERVOLTAGE) && |
| (chgin_dtls != 0x02)) { |
| pr_info("%s: vbus_state : 0x%d, chg_state : 0x%d\n", __func__, chgin_dtls, chg_dtls); |
| pr_info("%s: overvoltage->normal\n", __func__); |
| value.intval = POWER_SUPPLY_HEALTH_GOOD; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| } else if ((battery_health == \ |
| POWER_SUPPLY_HEALTH_UNDERVOLTAGE) && |
| !((chgin_dtls == 0x0) || (chgin_dtls == 0x01))){ |
| pr_info("%s: vbus_state : 0x%d, chg_state : 0x%d\n", __func__, chgin_dtls, chg_dtls); |
| pr_info("%s: undervoltage->normal\n", __func__); |
| value.intval = POWER_SUPPLY_HEALTH_GOOD; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| max77865_set_input_current(charger, |
| charger->input_current); |
| } |
| } |
| break; |
| } |
| |
| prev_chgin_dtls = chgin_dtls; |
| msleep(100); |
| } |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, 0, MAX77865_CHGIN_IM); |
| wake_unlock(&charger->chgin_wake_lock); |
| } |
| |
| static irqreturn_t max77865_chgin_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| queue_work(charger->wqueue, &charger->chgin_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* register chgin isr after sec_battery_probe */ |
| static void max77865_chgin_init_work(struct work_struct *work) |
| { |
| struct max77865_charger_data *charger = container_of(work, |
| struct max77865_charger_data, |
| chgin_init_work.work); |
| int ret; |
| |
| pr_info("%s \n", __func__); |
| ret = request_threaded_irq(charger->irq_chgin, NULL, |
| max77865_chgin_irq, 0, "chgin-irq", charger); |
| if (ret < 0) { |
| pr_err("%s: fail to request chgin IRQ: %d: %d\n", |
| __func__, charger->irq_chgin, ret); |
| } else { |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, 0, MAX77865_CHGIN_IM); |
| } |
| } |
| |
| static void max77865_wc_current_work(struct work_struct *work) |
| { |
| struct max77865_charger_data *charger = container_of(work, |
| struct max77865_charger_data, |
| wc_current_work.work); |
| int diff_current = 0; |
| |
| if (is_not_wireless_type(charger->cable_type)) { |
| charger->wc_pre_current = WC_CURRENT_START; |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_10, 0x10); |
| wake_unlock(&charger->wc_current_wake_lock); |
| return; |
| } |
| |
| if (charger->wc_pre_current == charger->wc_current) { |
| union power_supply_propval value; |
| max77865_set_charge_current(charger, charger->charging_current); |
| /* Wcurr-B) Restore Vrect adj room to previous value |
| after finishing wireless input current setting. Refer to Wcurr-A) step */ |
| msleep(500); |
| if (is_nv_wireless_type(charger->cable_type)) { |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_CAPACITY, value); |
| if (value.intval < charger->pdata->wireless_cc_cv) |
| value.intval = WIRELESS_VRECT_ADJ_ROOM_4; /* WPC 4.5W, Vrect Room 30mV */ |
| else |
| value.intval = WIRELESS_VRECT_ADJ_ROOM_5; /* WPC 4.5W, Vrect Room 80mV */ |
| } else if (is_hv_wireless_type(charger->cable_type)) { |
| value.intval = WIRELESS_VRECT_ADJ_ROOM_5; /* WPC 9W, Vrect Room 80mV */ |
| } else |
| value.intval = WIRELESS_VRECT_ADJ_OFF; /* PMA 4.5W, Vrect Room 0mV */ |
| psy_do_property(charger->pdata->wireless_charger_name, set, |
| POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION, value); |
| wake_unlock(&charger->wc_current_wake_lock); |
| } else { |
| if (charger->wc_pre_current > charger->wc_current) { |
| diff_current = charger->wc_pre_current - charger->wc_current; |
| if (diff_current < WC_CURRENT_STEP) |
| charger->wc_pre_current -= diff_current; |
| else |
| charger->wc_pre_current -= WC_CURRENT_STEP; |
| } else { |
| diff_current = charger->wc_current - charger->wc_pre_current; |
| if (diff_current < WC_CURRENT_STEP) |
| charger->wc_pre_current += diff_current; |
| else |
| charger->wc_pre_current += WC_CURRENT_STEP; |
| } |
| max77865_set_input_current(charger, charger->wc_pre_current); |
| queue_delayed_work(charger->wqueue, &charger->wc_current_work, |
| msecs_to_jiffies(WC_CURRENT_WORK_STEP)); |
| } |
| pr_info("%s: wc_current(%d), wc_pre_current(%d), diff(%d)\n", |
| __func__, charger->wc_current, charger->wc_pre_current, diff_current); |
| } |
| |
| static irqreturn_t max77865_sysovlo_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| union power_supply_propval value; |
| |
| pr_info("%s \n", __func__); |
| wake_lock_timeout(&charger->sysovlo_wake_lock, HZ * 5); |
| |
| psy_do_property("battery", set, |
| POWER_SUPPLY_EXT_PROP_SYSOVLO, value); |
| |
| max77865_set_sysovlo(charger, 0); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t max77865_chg_bat_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| u8 bat_dtls; |
| |
| pr_info("%s: \n", __func__); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_DETAILS_01, &bat_dtls); |
| bat_dtls = (bat_dtls & 0x70) >> 4; |
| pr_info("%s: read bat dtls(0x%2x)\n", __func__, bat_dtls); |
| if (bat_dtls == 0x6) { |
| //panic("BATTERY - OCP"); |
| pr_info("%s: BATTERY - OCP\n", __func__); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t max77865_systm_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| u8 treg_state; |
| |
| pr_info("%s \n", __func__); |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_DETAILS_01, &treg_state); |
| treg_state = treg_state >> 7;; |
| pr_info("%s: read treg(0x%2x)\n", __func__, treg_state); |
| if (treg_state) { |
| //panic("BATTERY - TREG"); |
| pr_info("%s: BATTERY - TREG\n", __func__); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t max77865_chg_irq(int irq, void *data) |
| { |
| struct max77865_charger_data *charger = data; |
| u8 chg_dtls; |
| |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_DETAILS_01, &chg_dtls); |
| chg_dtls = chg_dtls & 0x0F; |
| pr_info("%s: chg dtls(0x%x)\n", __func__, chg_dtls); |
| if (chg_dtls == 0x0B) { |
| pr_info("%s: watchdog timer expiration\n", __func__); |
| max77865_test_read(charger); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_OF |
| static int max77865_charger_parse_dt(struct max77865_charger_data *charger) |
| { |
| struct device_node *np; |
| sec_charger_platform_data_t *pdata = charger->pdata; |
| int ret = 0; |
| |
| np = of_find_node_by_name(NULL, "battery"); |
| if (!np) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| charger->enable_sysovlo_irq = of_property_read_bool(np, "battery,enable_sysovlo_irq"); |
| |
| ret = of_property_read_u32(np, "battery,chg_float_voltage", |
| &pdata->chg_float_voltage); |
| if (ret) { |
| pr_info("%s: battery,chg_float_voltage is Empty\n", __func__); |
| pdata->chg_float_voltage = 42000; |
| } |
| pr_info("%s: battery,chg_float_voltage is %d\n", __func__, pdata->chg_float_voltage); |
| charger->float_voltage = pdata->chg_float_voltage; |
| |
| ret = of_property_read_string(np, |
| "battery,wireless_charger_name", (char const **)&pdata->wireless_charger_name); |
| if (ret) |
| pr_info("%s: Wireless charger name is Empty\n", __func__); |
| |
| ret = of_property_read_u32(np, "battery,full_check_type_2nd", |
| &pdata->full_check_type_2nd); |
| if (ret) |
| pr_info("%s : Full check type 2nd is Empty\n", __func__); |
| |
| ret = of_property_read_u32(np, "battery,wireless_cc_cv", &pdata->wireless_cc_cv); |
| if (ret) |
| pr_info("%s : wireless_cc_cv is Empty\n", __func__); |
| } |
| |
| np = of_find_node_by_name(NULL, "max77865-charger"); |
| if (!np) { |
| pr_err("%s: np(max77865-charger) is NULL\n", __func__); |
| } else { |
| charger->enable_boost_mode_wa = |
| of_property_read_bool(np, "charger,enable_boost_mode_wa"); |
| |
| ret = of_property_read_u8(np, "charger,vsys_ocp", |
| &charger->vsys_ocp); |
| if (ret) { |
| pr_info("%s : default vsys ocp\n", __func__); |
| charger->vsys_ocp = 0x04; |
| } |
| } |
| |
| np = of_find_node_by_name(NULL, "max77865-fuelgauge"); |
| if (!np) { |
| pr_err("%s: np(max77865_fuelgauge) is NULL\n", __func__); |
| } else { |
| charger->jig_low_active = of_property_read_bool(np, |
| "fuelgauge,jig_low_active"); |
| charger->jig_gpio = of_get_named_gpio(np, "fuelgauge,jig_gpio", 0); |
| if (charger->jig_gpio < 0) { |
| pr_err("%s error reading jig_gpio = %d\n", |
| __func__, charger->jig_gpio); |
| charger->jig_gpio = 0; |
| } |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| static const struct power_supply_desc max77865_charger_power_supply_desc = { |
| .name = "max77865-charger", |
| .type = POWER_SUPPLY_TYPE_UNKNOWN, |
| .properties = max77865_charger_props, |
| .num_properties = ARRAY_SIZE(max77865_charger_props), |
| .get_property = max77865_chg_get_property, |
| .set_property = max77865_chg_set_property, |
| .no_thermal = true, |
| }; |
| |
| static const struct power_supply_desc otg_power_supply_desc = { |
| .name = "otg", |
| .type = POWER_SUPPLY_TYPE_OTG, |
| .properties = max77865_otg_props, |
| .num_properties = ARRAY_SIZE(max77865_otg_props), |
| .get_property = max77865_otg_get_property, |
| .set_property = max77865_otg_set_property, |
| }; |
| |
| static int max77865_charger_probe(struct platform_device *pdev) |
| { |
| struct max77865_dev *max77865 = dev_get_drvdata(pdev->dev.parent); |
| struct max77865_platform_data *pdata = dev_get_platdata(max77865->dev); |
| sec_charger_platform_data_t *charger_data; |
| struct max77865_charger_data *charger; |
| struct power_supply_config charger_cfg = {}; |
| int ret = 0; |
| u8 reg_data; |
| |
| pr_info("%s: max77865 Charger Driver Loading\n", __func__); |
| |
| charger = kzalloc(sizeof(*charger), GFP_KERNEL); |
| if (!charger) |
| return -ENOMEM; |
| |
| charger_data = kzalloc(sizeof(sec_charger_platform_data_t), GFP_KERNEL); |
| if (!charger_data) { |
| ret = -ENOMEM; |
| goto err_free; |
| } |
| |
| mutex_init(&charger->charger_mutex); |
| |
| charger->dev = &pdev->dev; |
| charger->i2c = max77865->charger; |
| charger->pmic_i2c = max77865->i2c; |
| charger->pdata = charger_data; |
| charger->aicl_on = false; |
| charger->is_mdock = false; |
| charger->otg_on = false; |
| charger->max77865_pdata = pdata; |
| charger->wc_pre_current = WC_CURRENT_START; |
| charger->vsys_ocp = 0x04; |
| |
| #if defined(CONFIG_OF) |
| ret = max77865_charger_parse_dt(charger); |
| if (ret < 0) { |
| pr_err("%s not found charger dt! ret[%d]\n", |
| __func__, ret); |
| } |
| #endif |
| platform_set_drvdata(pdev, charger); |
| |
| max77865_charger_initialize(charger); |
| |
| max77865_read_reg(charger->i2c, MAX77865_CHG_REG_INT_OK, ®_data); |
| if (reg_data & MAX77865_WCIN_OK) |
| charger->cable_type = SEC_BATTERY_CABLE_WIRELESS; |
| charger->input_current = max77865_get_input_current(charger); |
| charger->charging_current = max77865_get_charge_current(charger); |
| |
| if (max77865_read_reg(max77865->i2c, MAX77865_PMIC_REG_PMICREV, ®_data) < 0) { |
| pr_err("device not found on this channel (this is not an error)\n"); |
| ret = -ENOMEM; |
| goto err_pdata_free; |
| } else { |
| charger->pmic_ver = (reg_data & 0x7); |
| pr_info("%s : device found : ver.0x%x\n", __func__, charger->pmic_ver); |
| } |
| |
| (void) debugfs_create_file("max77865-regs", |
| S_IRUGO, NULL, (void *)charger, &max77865_debugfs_fops); |
| |
| charger->wqueue = |
| create_singlethread_workqueue(dev_name(&pdev->dev)); |
| if (!charger->wqueue) { |
| pr_err("%s: Fail to Create Workqueue\n", __func__); |
| goto err_pdata_free; |
| } |
| wake_lock_init(&charger->chgin_wake_lock, WAKE_LOCK_SUSPEND, |
| "charger->chgin"); |
| INIT_WORK(&charger->chgin_work, max77865_chgin_isr_work); |
| wake_lock_init(&charger->aicl_wake_lock, WAKE_LOCK_SUSPEND, |
| "charger-aicl"); |
| INIT_DELAYED_WORK(&charger->aicl_work, max77865_aicl_isr_work); |
| INIT_DELAYED_WORK(&charger->chgin_init_work, max77865_chgin_init_work); |
| wake_lock_init(&charger->wpc_wake_lock, WAKE_LOCK_SUSPEND, |
| "charger-wpc"); |
| INIT_DELAYED_WORK(&charger->wpc_work, wpc_detect_work); |
| wake_lock_init(&charger->wc_current_wake_lock, WAKE_LOCK_SUSPEND, |
| "charger->wc-current"); |
| INIT_DELAYED_WORK(&charger->wc_current_work, max77865_wc_current_work); |
| wake_lock_init(&charger->otg_wake_lock, WAKE_LOCK_SUSPEND, |
| "otg-path"); |
| |
| charger_cfg.drv_data = charger; |
| |
| charger->psy_chg = power_supply_register(&pdev->dev, &max77865_charger_power_supply_desc, &charger_cfg); |
| if (!charger->psy_chg) { |
| pr_err("%s: Failed to Register psy_chg\n", __func__); |
| goto err_power_supply_register; |
| } |
| |
| charger->psy_otg = power_supply_register(&pdev->dev, &otg_power_supply_desc, &charger_cfg); |
| if (!charger->psy_otg) { |
| pr_err("%s: Failed to Register otg_chg\n", __func__); |
| goto err_power_supply_register_otg; |
| } |
| |
| if (charger->pdata->chg_irq) { |
| INIT_DELAYED_WORK(&charger->isr_work, max77865_chg_isr_work); |
| |
| ret = request_threaded_irq(charger->pdata->chg_irq, |
| NULL, max77865_chg_irq_thread, |
| charger->pdata->chg_irq_attr, |
| "charger-irq", charger); |
| if (ret) { |
| pr_err("%s: Failed to Request IRQ\n", __func__); |
| goto err_irq; |
| } |
| |
| ret = enable_irq_wake(charger->pdata->chg_irq); |
| if (ret < 0) |
| pr_err("%s: Failed to Enable Wakeup Source(%d)\n", |
| __func__, ret); |
| } |
| |
| charger->wc_w_irq = pdata->irq_base + MAX77865_CHG_IRQ_WCIN_I; |
| ret = request_threaded_irq(charger->wc_w_irq, |
| NULL, wpc_charger_irq, |
| IRQF_TRIGGER_FALLING, |
| "wpc-int", charger); |
| if (ret) { |
| pr_err("%s: Failed to Request IRQ\n", __func__); |
| goto err_wc_irq; |
| } |
| |
| max77865_read_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_OK, ®_data); |
| charger->wc_w_state = (reg_data & MAX77865_WCIN_OK) |
| >> MAX77865_WCIN_OK_SHIFT; |
| |
| charger->irq_chgin = pdata->irq_base + MAX77865_CHG_IRQ_CHGIN_I; |
| /* enable chgin irq after sec_battery_probe */ |
| queue_delayed_work(charger->wqueue, &charger->chgin_init_work, |
| msecs_to_jiffies(3000)); |
| |
| charger->irq_bypass = pdata->irq_base + MAX77865_CHG_IRQ_BYP_I; |
| ret = request_threaded_irq(charger->irq_bypass, NULL, |
| max77865_bypass_irq, 0, "bypass-irq", charger); |
| if (ret < 0) { |
| pr_err("%s: fail to request bypass IRQ: %d: %d\n", |
| __func__, charger->irq_bypass, ret); |
| } else { |
| max77865_update_reg(charger->i2c, |
| MAX77865_CHG_REG_INT_MASK, 0, MAX77865_BYP_IM); |
| } |
| |
| charger->irq_aicl_enabled = -1; |
| charger->irq_aicl = pdata->irq_base + MAX77865_CHG_IRQ_AICL_I; |
| charger->irq_batp = pdata->irq_base + MAX77865_CHG_IRQ_BATP_I; |
| ret = request_threaded_irq(charger->irq_batp, NULL, |
| max77865_batp_irq, 0, |
| "batp-irq", charger); |
| if (ret < 0) |
| pr_err("%s: fail to request bypass IRQ: %d: %d\n", |
| __func__, charger->irq_batp, ret); |
| |
| if (charger->enable_sysovlo_irq) { |
| wake_lock_init(&charger->sysovlo_wake_lock, WAKE_LOCK_SUSPEND, |
| "max77865-sysovlo"); |
| /* Enable BIAS */ |
| max77865_update_reg(max77865->i2c, MAX77865_PMIC_REG_MAINCTRL1, 0x80, 0x80); |
| /* set IRQ thread */ |
| charger->irq_sysovlo = pdata->irq_base + MAX77865_SYSTEM_IRQ_SYSOVLO_INT; |
| ret = request_threaded_irq(charger->irq_sysovlo, NULL, |
| max77865_sysovlo_irq, 0, "sysovlo-irq", charger); |
| if (ret < 0) { |
| pr_err("%s: fail to request sysovlo IRQ: %d: %d\n", |
| __func__, charger->irq_sysovlo, ret); |
| } |
| enable_irq_wake(charger->irq_sysovlo); |
| } |
| |
| charger->irq_bat = pdata->irq_base + MAX77865_CHG_IRQ_BAT_I; |
| ret = request_threaded_irq(charger->irq_bat, NULL, |
| max77865_chg_bat_irq, 0, |
| "bat-irq", charger); |
| if (ret < 0) |
| pr_err("%s: fail to request battery IRQ: %d: %d\n", |
| __func__, charger->irq_bat, ret); |
| |
| charger->irq_tm = pdata->irq_base + MAX77865_SYSTEM_IRQ_TM_INT; |
| ret = request_threaded_irq(charger->irq_tm, NULL, |
| max77865_systm_irq, 0, |
| "sys-tm", charger); |
| if (ret < 0) |
| pr_err("%s: fail to request tm IRQ: %d: %d\n", |
| __func__, charger->irq_tm, ret); |
| |
| charger->irq_chg = pdata->irq_base + MAX77865_CHG_IRQ_CHG_I; |
| ret = request_threaded_irq(charger->irq_chg, NULL, |
| max77865_chg_irq, 0, |
| "chg-ok", charger); |
| if (ret < 0) |
| pr_err("%s: fail to request chg IRQ: %d: %d\n", |
| __func__, charger->irq_chg, ret); |
| |
| ret = max77865_chg_create_attrs(&charger->psy_chg->dev); |
| if (ret) { |
| dev_err(charger->dev, |
| "%s : Failed to create_attrs\n", __func__); |
| goto err_wc_irq; |
| } |
| |
| /* watchdog kick */ |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_06, |
| MAX77865_WDTCLR, MAX77865_WDTCLR); |
| |
| pr_info("%s: MAX77865 Charger Driver Loaded\n", __func__); |
| |
| return 0; |
| |
| err_wc_irq: |
| free_irq(charger->pdata->chg_irq, NULL); |
| err_irq: |
| power_supply_unregister(charger->psy_otg); |
| err_power_supply_register_otg: |
| power_supply_unregister(charger->psy_chg); |
| err_power_supply_register: |
| destroy_workqueue(charger->wqueue); |
| err_pdata_free: |
| kfree(charger_data); |
| err_free: |
| kfree(charger); |
| |
| return ret; |
| } |
| |
| static int max77865_charger_remove(struct platform_device *pdev) |
| { |
| struct max77865_charger_data *charger = |
| platform_get_drvdata(pdev); |
| |
| destroy_workqueue(charger->wqueue); |
| |
| if (charger->enable_sysovlo_irq) { |
| free_irq(charger->irq_sysovlo, NULL); |
| } |
| |
| free_irq(charger->wc_w_irq, NULL); |
| free_irq(charger->pdata->chg_irq, NULL); |
| power_supply_unregister(charger->psy_chg); |
| power_supply_unregister(charger->psy_otg); |
| kfree(charger); |
| |
| return 0; |
| } |
| |
| #if defined CONFIG_PM |
| static int max77865_charger_suspend(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static int max77865_charger_resume(struct device *dev) |
| { |
| return 0; |
| } |
| #else |
| #define max77865_charger_suspend NULL |
| #define max77865_charger_resume NULL |
| #endif |
| |
| static void max77865_charger_shutdown(struct platform_device *pdev) |
| { |
| struct max77865_charger_data *charger = platform_get_drvdata(pdev); |
| |
| u8 reg_data; |
| |
| pr_info("%s: max77865 Charger driver shutdown\n", __func__); |
| if (!charger->i2c) { |
| pr_err("%s: no max77865 i2c client\n", __func__); |
| return; |
| } |
| reg_data = 0x04; |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_00, reg_data); |
| reg_data = 0x0F; |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_09, reg_data); |
| reg_data = 0x10; |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_10, reg_data); |
| reg_data = 0x60; |
| max77865_write_reg(charger->i2c, |
| MAX77865_CHG_REG_CNFG_12, reg_data); |
| /* Disable WD_QBATTOFF */ |
| reg_data = 0x00; |
| max77865_update_reg(charger->i2c, MAX77865_CHG_REG_CNFG_07, |
| reg_data, CHG_CNFG_07_REG_WD_QBATTOFF_MASK); |
| pr_info("func:%s \n", __func__); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(max77865_charger_pm_ops, max77865_charger_suspend, |
| max77865_charger_resume); |
| |
| static struct platform_driver max77865_charger_driver = { |
| .driver = { |
| .name = "max77865-charger", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &max77865_charger_pm_ops, |
| #endif |
| }, |
| .probe = max77865_charger_probe, |
| .remove = max77865_charger_remove, |
| .shutdown = max77865_charger_shutdown, |
| }; |
| |
| static int __init max77865_charger_init(void) |
| { |
| pr_info("%s : \n", __func__); |
| return platform_driver_register(&max77865_charger_driver); |
| } |
| |
| static void __exit max77865_charger_exit(void) |
| { |
| platform_driver_unregister(&max77865_charger_driver); |
| } |
| |
| module_init(max77865_charger_init); |
| module_exit(max77865_charger_exit); |
| |
| MODULE_DESCRIPTION("Samsung MAX77865 Charger Driver"); |
| MODULE_AUTHOR("Samsung Electronics"); |
| MODULE_LICENSE("GPL"); |