| /* |
| * drivers/net/ucc_geth_mii.c |
| * |
| * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation |
| * Provides Bus interface for MII Management regs in the UCC register space |
| * |
| * Copyright (C) 2007 Freescale Semiconductor, Inc. |
| * |
| * Authors: Li Yang <leoli@freescale.com> |
| * Kim Phillips <kim.phillips@freescale.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/unistd.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <asm/ocp.h> |
| #include <linux/crc32.h> |
| #include <linux/mii.h> |
| #include <linux/phy.h> |
| #include <linux/fsl_devices.h> |
| |
| #include <asm/of_platform.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| #include <asm/ucc.h> |
| |
| #include "ucc_geth_mii.h" |
| #include "ucc_geth.h" |
| |
| #define DEBUG |
| #ifdef DEBUG |
| #define vdbg(format, arg...) printk(KERN_DEBUG , format "\n" , ## arg) |
| #else |
| #define vdbg(format, arg...) do {} while(0) |
| #endif |
| |
| #define MII_DRV_DESC "QE UCC Ethernet Controller MII Bus" |
| #define MII_DRV_NAME "fsl-uec_mdio" |
| |
| /* Write value to the PHY for this device to the register at regnum, */ |
| /* waiting until the write is done before it returns. All PHY */ |
| /* configuration has to be done through the master UEC MIIM regs */ |
| int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) |
| { |
| struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; |
| |
| /* Setting up the MII Mangement Address Register */ |
| out_be32(®s->miimadd, |
| (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum); |
| |
| /* Setting up the MII Mangement Control Register with the value */ |
| out_be32(®s->miimcon, value); |
| |
| /* Wait till MII management write is complete */ |
| while ((in_be32(®s->miimind)) & MIIMIND_BUSY) |
| cpu_relax(); |
| |
| return 0; |
| } |
| |
| /* Reads from register regnum in the PHY for device dev, */ |
| /* returning the value. Clears miimcom first. All PHY */ |
| /* configuration has to be done through the TSEC1 MIIM regs */ |
| int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum) |
| { |
| struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; |
| u16 value; |
| |
| /* Setting up the MII Mangement Address Register */ |
| out_be32(®s->miimadd, |
| (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum); |
| |
| /* Clear miimcom, perform an MII management read cycle */ |
| out_be32(®s->miimcom, 0); |
| out_be32(®s->miimcom, MIIMCOM_READ_CYCLE); |
| |
| /* Wait till MII management write is complete */ |
| while ((in_be32(®s->miimind)) & (MIIMIND_BUSY | MIIMIND_NOT_VALID)) |
| cpu_relax(); |
| |
| /* Read MII management status */ |
| value = in_be32(®s->miimstat); |
| |
| return value; |
| } |
| |
| /* Reset the MIIM registers, and wait for the bus to free */ |
| int uec_mdio_reset(struct mii_bus *bus) |
| { |
| struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; |
| unsigned int timeout = PHY_INIT_TIMEOUT; |
| |
| spin_lock_bh(&bus->mdio_lock); |
| |
| /* Reset the management interface */ |
| out_be32(®s->miimcfg, MIIMCFG_RESET_MANAGEMENT); |
| |
| /* Setup the MII Mgmt clock speed */ |
| out_be32(®s->miimcfg, MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112); |
| |
| /* Wait until the bus is free */ |
| while ((in_be32(®s->miimind) & MIIMIND_BUSY) && timeout--) |
| cpu_relax(); |
| |
| spin_unlock_bh(&bus->mdio_lock); |
| |
| if (timeout <= 0) { |
| printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name); |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| |
| static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *match) |
| { |
| struct device *device = &ofdev->dev; |
| struct device_node *np = ofdev->node, *tempnp = NULL; |
| struct device_node *child = NULL; |
| struct ucc_mii_mng __iomem *regs; |
| struct mii_bus *new_bus; |
| struct resource res; |
| int k, err = 0; |
| |
| new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); |
| |
| if (NULL == new_bus) |
| return -ENOMEM; |
| |
| new_bus->name = "UCC Ethernet Controller MII Bus"; |
| new_bus->read = &uec_mdio_read; |
| new_bus->write = &uec_mdio_write; |
| new_bus->reset = &uec_mdio_reset; |
| |
| memset(&res, 0, sizeof(res)); |
| |
| err = of_address_to_resource(np, 0, &res); |
| if (err) |
| goto reg_map_fail; |
| |
| new_bus->id = res.start; |
| |
| new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL); |
| |
| if (NULL == new_bus->irq) { |
| err = -ENOMEM; |
| goto reg_map_fail; |
| } |
| |
| for (k = 0; k < 32; k++) |
| new_bus->irq[k] = PHY_POLL; |
| |
| while ((child = of_get_next_child(np, child)) != NULL) { |
| int irq = irq_of_parse_and_map(child, 0); |
| if (irq != NO_IRQ) { |
| const u32 *id = of_get_property(child, "reg", NULL); |
| new_bus->irq[*id] = irq; |
| } |
| } |
| |
| /* Set the base address */ |
| regs = ioremap(res.start, sizeof(struct ucc_mii_mng)); |
| |
| if (NULL == regs) { |
| err = -ENOMEM; |
| goto ioremap_fail; |
| } |
| |
| new_bus->priv = (void __force *)regs; |
| |
| new_bus->dev = device; |
| dev_set_drvdata(device, new_bus); |
| |
| /* Read MII management master from device tree */ |
| while ((tempnp = of_find_compatible_node(tempnp, "network", "ucc_geth")) |
| != NULL) { |
| struct resource tempres; |
| |
| err = of_address_to_resource(tempnp, 0, &tempres); |
| if (err) |
| goto bus_register_fail; |
| |
| /* if our mdio regs fall within this UCC regs range */ |
| if ((res.start >= tempres.start) && |
| (res.end <= tempres.end)) { |
| /* set this UCC to be the MII master */ |
| const u32 *id = of_get_property(tempnp, "device-id", NULL); |
| if (id == NULL) |
| goto bus_register_fail; |
| |
| ucc_set_qe_mux_mii_mng(*id - 1); |
| |
| /* assign the TBI an address which won't |
| * conflict with the PHYs */ |
| out_be32(®s->utbipar, UTBIPAR_INIT_TBIPA); |
| break; |
| } |
| } |
| |
| err = mdiobus_register(new_bus); |
| if (0 != err) { |
| printk(KERN_ERR "%s: Cannot register as MDIO bus\n", |
| new_bus->name); |
| goto bus_register_fail; |
| } |
| |
| return 0; |
| |
| bus_register_fail: |
| iounmap(regs); |
| ioremap_fail: |
| kfree(new_bus->irq); |
| reg_map_fail: |
| kfree(new_bus); |
| |
| return err; |
| } |
| |
| int uec_mdio_remove(struct of_device *ofdev) |
| { |
| struct device *device = &ofdev->dev; |
| struct mii_bus *bus = dev_get_drvdata(device); |
| |
| mdiobus_unregister(bus); |
| |
| dev_set_drvdata(device, NULL); |
| |
| iounmap((void __iomem *)bus->priv); |
| bus->priv = NULL; |
| kfree(bus); |
| |
| return 0; |
| } |
| |
| static struct of_device_id uec_mdio_match[] = { |
| { |
| .type = "mdio", |
| .compatible = "ucc_geth_phy", |
| }, |
| {}, |
| }; |
| |
| static struct of_platform_driver uec_mdio_driver = { |
| .name = MII_DRV_NAME, |
| .probe = uec_mdio_probe, |
| .remove = uec_mdio_remove, |
| .match_table = uec_mdio_match, |
| }; |
| |
| int __init uec_mdio_init(void) |
| { |
| return of_register_platform_driver(&uec_mdio_driver); |
| } |
| |
| void __exit uec_mdio_exit(void) |
| { |
| of_unregister_platform_driver(&uec_mdio_driver); |
| } |