| /* |
| * p9220_charger.c |
| * Samsung p9220 Charger Driver |
| * |
| * Copyright (C) 2015 Samsung Electronics |
| * Yeongmi Ha <yeongmi86.ha@samsung.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/battery/charger/p9220_charger.h> |
| #include <linux/errno.h> |
| #include <linux/version.h> |
| #include <linux/device.h> |
| #include <linux/pm.h> |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/irqdomain.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/kernel.h> |
| #include <asm/uaccess.h> |
| #include <linux/sysctl.h> |
| #include <linux/proc_fs.h> |
| #include <linux/vmalloc.h> |
| #include <linux/ctype.h> |
| #include <linux/firmware.h> |
| |
| #define ENABLE 1 |
| #define DISABLE 0 |
| #define CMD_CNT 3 |
| |
| #define P9220S_FW_SDCARD_BIN_PATH "sdcard/p9220_otp.bin" |
| #define P9220S_OTP_FW_HEX_PATH "idt/p9220_otp.bin" |
| #define P9220S_SRAM_FW_HEX_PATH "idt/p9220_sram.bin" |
| |
| extern bool sleep_mode; |
| |
| static enum power_supply_property sec_charger_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_MANUFACTURER, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL, |
| POWER_SUPPLY_PROP_CHARGE_POWERED_OTG_CONTROL, |
| POWER_SUPPLY_PROP_ENERGY_NOW, |
| POWER_SUPPLY_PROP_ENERGY_AVG, |
| POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION, |
| POWER_SUPPLY_PROP_SCOPE, |
| }; |
| |
| int p9220_otp_update = 0; |
| u8 adc_cal = 0; |
| |
| extern unsigned int lpcharge; |
| int p9220_get_firmware_version(struct p9220_charger_data *charger, int firm_mode); |
| static irqreturn_t p9220_wpc_det_irq_thread(int irq, void *irq_data); |
| static irqreturn_t p9220_wpc_irq_thread(int irq, void *irq_data); |
| |
| static int p9220_reg_read(struct i2c_client *client, u16 reg, u8 *val) |
| { |
| struct p9220_charger_data *charger = i2c_get_clientdata(client); |
| int ret; |
| struct i2c_msg msg[2]; |
| u8 wbuf[2]; |
| u8 rbuf[2]; |
| |
| msg[0].addr = client->addr; |
| msg[0].flags = client->flags & I2C_M_TEN; |
| msg[0].len = 2; |
| msg[0].buf = wbuf; |
| |
| wbuf[0] = (reg & 0xFF00) >> 8; |
| wbuf[1] = (reg & 0xFF); |
| |
| msg[1].addr = client->addr; |
| msg[1].flags = I2C_M_RD; |
| msg[1].len = 1; |
| msg[1].buf = rbuf; |
| |
| mutex_lock(&charger->io_lock); |
| ret = i2c_transfer(client->adapter, msg, 2); |
| mutex_unlock(&charger->io_lock); |
| if (ret < 0) |
| { |
| dev_err(&client->dev, "%s: i2c read error, reg: 0x%x, ret: %d\n", |
| __func__, reg, ret); |
| return -1; |
| } |
| *val = rbuf[0]; |
| |
| return ret; |
| } |
| |
| static int p9220_reg_multi_read(struct i2c_client *client, u16 reg, u8 *val, int size) |
| { |
| struct p9220_charger_data *charger = i2c_get_clientdata(client); |
| int ret; |
| struct i2c_msg msg[2]; |
| u8 wbuf[2]; |
| |
| // pr_debug("%s: reg = 0x%x, size = 0x%x\n", __func__, reg, size); |
| msg[0].addr = client->addr; |
| msg[0].flags = client->flags & I2C_M_TEN; |
| msg[0].len = 2; |
| msg[0].buf = wbuf; |
| |
| wbuf[0] = (reg & 0xFF00) >> 8; |
| wbuf[1] = (reg & 0xFF); |
| |
| msg[1].addr = client->addr; |
| msg[1].flags = I2C_M_RD; |
| msg[1].len = size; |
| msg[1].buf = val; |
| |
| mutex_lock(&charger->io_lock); |
| ret = i2c_transfer(client->adapter, msg, 2); |
| mutex_unlock(&charger->io_lock); |
| if (ret < 0) |
| { |
| pr_err("%s: i2c transfer fail", __func__); |
| return -1; |
| } |
| |
| return ret; |
| } |
| |
| static int p9220_reg_write(struct i2c_client *client, u16 reg, u8 val) |
| { |
| struct p9220_charger_data *charger = i2c_get_clientdata(client); |
| int ret; |
| unsigned char data[3] = { reg >> 8, reg & 0xff, val }; |
| |
| mutex_lock(&charger->io_lock); |
| ret = i2c_master_send(client, data, 3); |
| mutex_unlock(&charger->io_lock); |
| if (ret < 3) { |
| dev_err(&client->dev, "%s: i2c write error, reg: 0x%x, ret: %d\n", |
| __func__, reg, ret); |
| return ret < 0 ? ret : -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int p9220_reg_update(struct i2c_client *client, u16 reg, u8 val, u8 mask) |
| { |
| struct p9220_charger_data *charger = i2c_get_clientdata(client); |
| unsigned char data[3] = { reg >> 8, reg & 0xff, val }; |
| u8 data2; |
| int ret; |
| |
| ret = p9220_reg_read(client, reg, &data2); |
| if (ret >= 0) { |
| u8 old_val = data2 & 0xff; |
| u8 new_val = (val & mask) | (old_val & (~mask)); |
| data[2] = new_val; |
| |
| mutex_lock(&charger->io_lock); |
| ret = i2c_master_send(client, data, 3); |
| mutex_unlock(&charger->io_lock); |
| if (ret < 3) { |
| dev_err(&client->dev, "%s: i2c write error, reg: 0x%x, ret: %d\n", |
| __func__, reg, ret); |
| return ret < 0 ? ret : -EIO; |
| } |
| } |
| p9220_reg_read(client, reg, &data2); |
| |
| return ret; |
| } |
| |
| static int p9220_reg_multi_write(struct i2c_client *client, u16 reg, const u8 * val, int size) |
| { |
| struct p9220_charger_data *charger = i2c_get_clientdata(client); |
| int ret; |
| const int sendsz = 16; |
| unsigned char data[sendsz+2]; |
| int cnt = 0; |
| |
| dev_err(&client->dev, "%s: size: 0x%x\n", |
| __func__, size); |
| while(size > sendsz) { |
| data[0] = (reg+cnt) >>8; |
| data[1] = (reg+cnt) & 0xff; |
| memcpy(data+2, val+cnt, sendsz); |
| mutex_lock(&charger->io_lock); |
| ret = i2c_master_send(client, data, sendsz+2); |
| mutex_unlock(&charger->io_lock); |
| if (ret < sendsz+2) { |
| dev_err(&client->dev, "%s: i2c write error, reg: 0x%x\n", |
| __func__, reg); |
| return ret < 0 ? ret : -EIO; |
| } |
| cnt = cnt + sendsz; |
| size = size - sendsz; |
| } |
| if (size > 0) { |
| data[0] = (reg+cnt) >>8; |
| data[1] = (reg+cnt) & 0xff; |
| memcpy(data+2, val+cnt, size); |
| mutex_lock(&charger->io_lock); |
| ret = i2c_master_send(client, data, size+2); |
| mutex_unlock(&charger->io_lock); |
| if (ret < size+2) { |
| dev_err(&client->dev, "%s: i2c write error, reg: 0x%x\n", |
| __func__, reg); |
| return ret < 0 ? ret : -EIO; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int p9220_clear_sram(struct i2c_client *client, u16 reg, const u8 * val, int size) |
| { |
| int ret; |
| const int sendsz = 64; |
| unsigned char data[sendsz+2]; |
| int cnt = 0; |
| |
| while(size > sendsz) { |
| data[0] = (reg+cnt) >>8; |
| data[1] = (reg+cnt) & 0xff; |
| memcpy(data+2, val, sendsz); |
| // dev_dbg(&client->dev, "%s: addr: 0x%x, cnt: 0x%x\n", __func__, reg+cnt, cnt); |
| ret = i2c_master_send(client, data, sendsz+2); |
| if (ret < sendsz+2) { |
| dev_err(&client->dev, "%s: i2c write error, reg: 0x%x\n", |
| __func__, reg); |
| return ret < 0 ? ret : -EIO; |
| } |
| cnt = cnt + sendsz; |
| size = size - sendsz; |
| } |
| if (size > 0) { |
| data[0] = (reg+cnt) >>8; |
| data[1] = (reg+cnt) & 0xff; |
| memcpy(data+2, val, size); |
| // dev_dbg(&client->dev, "%s: addr: 0x%x, cnt: 0x%x, size: 0x%x\n", __func__, reg+cnt, cnt, size); |
| ret = i2c_master_send(client, data, size+2); |
| if (ret < size+2) { |
| dev_err(&client->dev, "%s: i2c write error, reg: 0x%x\n", |
| __func__, reg); |
| return ret < 0 ? ret : -EIO; |
| } |
| } |
| |
| return ret; |
| } |
| |
| int p9220_get_adc(struct p9220_charger_data *charger, int adc_type) |
| { |
| int ret = 0; |
| u8 data[2] = {0,}; |
| |
| switch (adc_type) { |
| case P9220_ADC_VOUT: |
| ret = p9220_reg_read(charger->client, P9220_ADC_VOUT_L_REG, &data[0]); |
| ret = p9220_reg_read(charger->client, P9220_ADC_VOUT_H_REG, &data[1]); |
| if(ret >= 0 ) { |
| data[1] &= 0x0f; |
| ret = (data[0] | (data[1] << 8))*12600/4095; |
| } else |
| ret = 0; |
| break; |
| case P9220_ADC_VRECT: |
| ret = p9220_reg_read(charger->client, P9220_ADC_VRECT_L_REG, &data[0]); |
| ret = p9220_reg_read(charger->client, P9220_ADC_VRECT_H_REG, &data[1]); |
| if(ret >= 0 ) { |
| data[1] &= 0x0f; |
| ret = (data[0] | (data[1] << 8))*21000/4095; |
| } else |
| ret = 0; |
| break; |
| case P9220_ADC_TX_ISENSE: |
| ret = p9220_reg_read(charger->client, P9220_ADC_TX_ISENSE_L_REG, &data[0]); |
| ret = p9220_reg_read(charger->client, P9220_ADC_TX_ISENSE_H_REG, &data[1]); |
| if(ret >= 0 ) { |
| data[1] &= 0x0f; |
| ret = (data[0] | (data[1] << 8)); // need to check |
| } else |
| ret = 0; |
| break; |
| case P9220_ADC_RX_IOUT: |
| ret = p9220_reg_read(charger->client, P9220_ADC_RX_IOUT_L_REG, &data[0]); |
| ret = p9220_reg_read(charger->client, P9220_ADC_RX_IOUT_H_REG, &data[1]); |
| if(ret >= 0 ) { |
| data[1] &= 0x0f; |
| ret = (data[0] | (data[1] << 8)); // need to check |
| } else |
| ret = 0; |
| break; |
| case P9220_ADC_DIE_TEMP: |
| ret = p9220_reg_read(charger->client, P9220_ADC_DIE_TEMP_L_REG, &data[0]); |
| ret = p9220_reg_read(charger->client, P9220_ADC_DIE_TEMP_H_REG, &data[1]); |
| if(ret >= 0 ) { |
| data[1] &= 0x0f; |
| ret = (data[0] | (data[1] << 8)); // need to check |
| } else |
| ret = 0; |
| break; |
| |
| case P9220_ADC_ALLIGN_X: |
| ret = p9220_reg_read(charger->client, P9220_ADC_ALLIGN_X_REG, &data[0]); |
| if(ret >= 0 ) { |
| ret = data[0]; // need to check |
| } else |
| ret = 0; |
| break; |
| |
| case P9220_ADC_ALLIGN_Y: |
| ret = p9220_reg_read(charger->client, P9220_ADC_ALLIGN_Y_REG, &data[0]); |
| if(ret >= 0 ) { |
| ret = data[0]; // need to check |
| } else |
| ret = 0; |
| break; |
| case P9220_ADC_OP_FRQ: |
| ret = p9220_reg_read(charger->client, P9220_OP_FREQ_L_REG, &data[0]); |
| if(ret < 0 ) { |
| ret = 0; |
| return ret; |
| } |
| ret = p9220_reg_read(charger->client, P9220_OP_FREQ_H_REG, &data[1]); |
| if(ret >= 0 ) |
| ret = (data[0] | (data[1] << 8)); |
| else |
| ret = -1; |
| break; |
| case P9220_ADC_TX_PING: |
| ret = p9220_reg_read(charger->client, P9220_TX_PING_FREQ_REG, &data[0]); |
| if(ret >= 0 ) |
| ret = data[0]; |
| else |
| ret = -1; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| void p9220_set_vout(struct p9220_charger_data *charger, int vout) |
| { |
| union power_supply_propval value; |
| switch (vout) { |
| case P9220_VOUT_5V: |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, P9220_VOUT_5V_VAL); |
| msleep(100); |
| pr_info("%s vout read = %d mV \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| break; |
| case P9220_VOUT_6V: |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, P9220_VOUT_6V_VAL); |
| msleep(100); |
| pr_info("%s vout read = %d mV \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| break; |
| case P9220_VOUT_9V: |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_CHARGE_COUNTER_SHADOW, value); |
| if (value.intval == POWER_SUPPLY_TYPE_OTG || value.intval == POWER_SUPPLY_TYPE_POWER_SHARING) { |
| pr_info("%s wire_status = %d. do not set VOUT 9V \n", __func__, value.intval); |
| break; |
| } |
| /* We set VOUT to 10V actually for HERO for RE/CE standard authentication */ |
| if (charger->pdata->hv_vout_wa) |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, charger->pdata->hv_vout_wa); |
| else |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, P9220_VOUT_9V_VAL); |
| msleep(100); |
| pr_info("%s vout read = %d mV \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| break; |
| case P9220_VOUT_CC_CV: |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, |
| (charger->pdata->wpc_cc_cv_vout - 3500) / 100); |
| msleep(100); |
| pr_info("%s vout read = %d mV \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| break; |
| case P9220_VOUT_CV_CALL: |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, |
| (charger->pdata->wpc_cv_call_vout - 3500) / 100); |
| msleep(100); |
| pr_info("%s vout read = %d mV \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| break; |
| case P9220_VOUT_CC_CALL: |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, |
| (charger->pdata->wpc_cc_call_vout - 3500) / 100); |
| msleep(100); |
| pr_info("%s vout read = %d mV \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| break; |
| case P9220_VOUT_9V_STEP: |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, P9220_VOUT_6V_VAL); |
| msleep(1000); |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, P9220_VOUT_7V_VAL); |
| msleep(1000); |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, P9220_VOUT_8V_VAL); |
| msleep(1000); |
| p9220_reg_write(charger->client, P9220_VOUT_SET_REG, P9220_VOUT_9V_VAL); |
| msleep(1000); |
| pr_info("%s vout read = %d mV \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| break; |
| default: |
| break; |
| } |
| charger->pdata->vout_status = vout; |
| } |
| |
| int p9220_get_vout(struct p9220_charger_data *charger) |
| { |
| u8 data; |
| int ret; |
| ret = p9220_reg_read(charger->client, P9220_VOUT_SET_REG, &data); |
| if (ret < 0) { |
| pr_err("%s: fail to read vout. (%d)\n", __func__, ret); |
| return ret; |
| } else |
| pr_info("%s: vout(0x%x)\n", __func__, data); |
| |
| return data; |
| } |
| |
| void p9220_fod_set(struct p9220_charger_data *charger) |
| { |
| int i = 0; |
| |
| pr_info("%s \n", __func__); |
| if(charger->pdata->fod_data_check) { |
| for(i=0; i< P9220_NUM_FOD_REG; i++) |
| p9220_reg_write(charger->client, P9220_WPC_FOD_0A_REG+i, charger->pdata->fod_data[i]); |
| } |
| } |
| |
| void p9220_fod_set_cv(struct p9220_charger_data *charger) |
| { |
| int i = 0; |
| |
| pr_info("%s \n", __func__); |
| if(charger->pdata->fod_data_check) { |
| for(i=0; i< P9220_NUM_FOD_REG; i++) |
| p9220_reg_write(charger->client, P9220_WPC_FOD_0A_REG+i, charger->pdata->fod_data_cv[i]); |
| } |
| } |
| |
| void p9220_fod_set_cs100(struct p9220_charger_data *charger) |
| { |
| int i = 0; |
| |
| pr_info("%s \n", __func__); |
| if(charger->pdata->fod_data_check) { |
| for(i=1; i< P9220_NUM_FOD_REG; i+=2) |
| p9220_reg_write(charger->client, P9220_WPC_FOD_0A_REG+i, 0x7f); |
| } |
| } |
| |
| void p9220_set_cmd_reg(struct p9220_charger_data *charger, u8 val, u8 mask) |
| { |
| u8 temp = 0; |
| int ret = 0, i = 0; |
| |
| do { |
| pr_info("%s \n", __func__); |
| ret = p9220_reg_update(charger->client, P9220_COMMAND_REG, val, mask); // command |
| if(ret >= 0) { |
| msleep(250); |
| ret = p9220_reg_read(charger->client, P9220_COMMAND_REG, &temp); // check out set bit exists |
| if(ret < 0 || i > 3 ) |
| break; |
| } |
| i++; |
| }while(temp != 0); |
| } |
| |
| void p9220_send_eop(struct p9220_charger_data *charger, int health_mode) |
| { |
| int i = 0; |
| int ret = 0; |
| |
| switch(health_mode) { |
| case POWER_SUPPLY_HEALTH_OVERHEAT: |
| case POWER_SUPPLY_HEALTH_OVERHEATLIMIT: |
| case POWER_SUPPLY_HEALTH_COLD: |
| if(charger->pdata->cable_type == SEC_WIRELESS_PAD_PMA) { |
| pr_info("%s pma mode \n", __func__); |
| for(i = 0; i < CMD_CNT; i++) { |
| ret = p9220_reg_write(charger->client, P9220_END_POWER_TRANSFER_REG, P9220_EPT_END_OF_CHG); |
| if(ret >= 0) { |
| p9220_set_cmd_reg(charger, P9220_CMD_SEND_EOP_MASK, P9220_CMD_SEND_EOP_MASK); |
| msleep(250); |
| } else |
| break; |
| } |
| } else { |
| pr_info("%s wpc mode \n", __func__); |
| for(i = 0; i < CMD_CNT; i++) { |
| ret = p9220_reg_write(charger->client, P9220_END_POWER_TRANSFER_REG, P9220_EPT_OVER_TEMP); |
| if(ret >= 0) { |
| p9220_set_cmd_reg(charger, P9220_CMD_SEND_EOP_MASK, P9220_CMD_SEND_EOP_MASK); |
| msleep(250); |
| } else |
| break; |
| } |
| } |
| break; |
| case POWER_SUPPLY_HEALTH_UNDERVOLTAGE: |
| #if 0 |
| pr_info("%s ept-reconfigure \n", __func__); |
| ret = p9220_reg_write(charger->client, P9220_END_POWER_TRANSFER_REG, P9220_EPT_RECONFIG); |
| if(ret >= 0) { |
| p9220_set_cmd_reg(charger, P9220_CMD_SEND_EOP_MASK, P9220_CMD_SEND_EOP_MASK); |
| msleep(250); |
| } |
| #endif |
| break; |
| default: |
| break; |
| } |
| } |
| |
| int p9220_send_cs100(struct p9220_charger_data *charger) |
| { |
| int i = 0; |
| int ret = 0; |
| |
| for(i = 0; i < CMD_CNT; i++) { |
| ret = p9220_reg_write(charger->client, P9220_CHG_STATUS_REG, 100); |
| if(ret >= 0) { |
| p9220_set_cmd_reg(charger, P9220_CMD_SEND_CHG_STS_MASK, P9220_CMD_SEND_CHG_STS_MASK); |
| msleep(250); |
| ret = 1; |
| } else { |
| ret = -1; |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| void p9220_send_packet(struct p9220_charger_data *charger, u8 header, u8 rx_data_com, u8 *data_val, int data_size) |
| { |
| int ret; |
| int i; |
| ret = p9220_reg_write(charger->client, P9220_PACKET_HEADER, header); |
| ret = p9220_reg_write(charger->client, P9220_RX_DATA_COMMAND, rx_data_com); |
| |
| for(i = 0; i< data_size; i++) { |
| ret = p9220_reg_write(charger->client, P9220_RX_DATA_VALUE0 + i, data_val[i]); |
| } |
| p9220_set_cmd_reg(charger, P9220_CMD_SEND_RX_DATA_MASK, P9220_CMD_SEND_RX_DATA_MASK); |
| } |
| |
| void p9220_send_command(struct p9220_charger_data *charger, int cmd_mode) |
| { |
| u8 data_val[4]; |
| |
| switch (cmd_mode) { |
| case P9220_AFC_CONF_5V: |
| pr_info("%s set 5V \n", __func__); |
| |
| data_val[0] = 0x05; |
| p9220_send_packet(charger, P9220_HEADER_AFC_CONF, P9220_RX_DATA_COM_AFC_SET, data_val, 1); |
| msleep(120); |
| |
| p9220_set_vout(charger, P9220_VOUT_5V); |
| pr_info("%s vout read = %d \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| p9220_reg_read(charger->client, P9220_RX_DATA_COMMAND, &data_val[0]); |
| p9220_reg_read(charger->client, P9220_RX_DATA_VALUE0, &data_val[0]); |
| p9220_reg_read(charger->client, P9220_COMMAND_REG, &data_val[0]); |
| break; |
| case P9220_AFC_CONF_9V: |
| pr_info("%s set 9V \n", __func__); |
| |
| data_val[0] = 0x2c; |
| p9220_send_packet(charger, P9220_HEADER_AFC_CONF, P9220_RX_DATA_COM_AFC_SET, data_val, 1); |
| msleep(120); |
| |
| /* Enable Clamp1, Clamp2 for WPC 9W */ |
| p9220_reg_update(charger->client, P9220_MOD_DEPTH_REG, 0x30, 0x30); |
| p9220_set_vout(charger, P9220_VOUT_9V); |
| pr_info("%s vout read = %d \n", __func__, p9220_get_adc(charger, P9220_ADC_VOUT)); |
| |
| p9220_reg_read(charger->client, P9220_RX_DATA_COMMAND, &data_val[0]); |
| p9220_reg_read(charger->client, P9220_RX_DATA_VALUE0, &data_val[0]); |
| p9220_reg_read(charger->client, P9220_COMMAND_REG, &data_val[0]); |
| break; |
| case P9220_LED_CONTROL_ON: |
| pr_info("%s led on \n", __func__); |
| data_val[0] = 0x0; |
| p9220_send_packet(charger, P9220_HEADER_AFC_CONF, P9220_RX_DATA_COM_LED_CTRL, data_val, 1); |
| break; |
| case P9220_LED_CONTROL_OFF: |
| pr_info("%s led off \n", __func__); |
| data_val[0] = 0xff; |
| p9220_send_packet(charger, P9220_HEADER_AFC_CONF, P9220_RX_DATA_COM_LED_CTRL, data_val, 1); |
| break; |
| case P9220_FAN_CONTROL_ON: |
| pr_info("%s fan on \n", __func__); |
| data_val[0] = 0x0; |
| p9220_send_packet(charger, P9220_HEADER_AFC_CONF, P9220_RX_DATA_COM_FAN_CTRL, data_val, 1); |
| break; |
| case P9220_FAN_CONTROL_OFF: |
| pr_info("%s fan off \n", __func__); |
| data_val[0] = 0xff; |
| p9220_send_packet(charger, P9220_HEADER_AFC_CONF, P9220_RX_DATA_COM_FAN_CTRL, data_val, 1); |
| break; |
| case P9220_REQUEST_AFC_TX: |
| pr_info("%s request afc tx \n", __func__); |
| data_val[0] = 0x0; |
| p9220_send_packet(charger, P9220_HEADER_AFC_CONF, P9220_RX_DATA_COM_REQ_AFC, data_val, 1); |
| break; |
| case P9220_REQUEST_TX_ID: |
| pr_info("%s request TX ID \n", __func__); |
| data_val[0] = 0x0; |
| p9220_send_packet(charger, P9220_HEADER_AFC_CONF, P9220_RX_DATA_COM_TX_ID, data_val, 1); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void p9220_led_control(struct p9220_charger_data *charger, bool on) |
| { |
| int i = 0; |
| |
| if(on) { |
| for(i=0; i< CMD_CNT; i++) |
| p9220_send_command(charger, P9220_LED_CONTROL_ON); |
| } else { |
| for(i=0; i< CMD_CNT; i++) |
| p9220_send_command(charger, P9220_LED_CONTROL_OFF); |
| } |
| } |
| |
| void p9220_fan_control(struct p9220_charger_data *charger, bool on) |
| { |
| int i = 0; |
| |
| if(on) { |
| for(i=0; i< CMD_CNT -1; i++) |
| p9220_send_command(charger, P9220_FAN_CONTROL_ON); |
| } else { |
| for(i=0; i< CMD_CNT -1; i++) |
| p9220_send_command(charger, P9220_FAN_CONTROL_OFF); |
| } |
| } |
| |
| void p9220_set_vrect_adjust(struct p9220_charger_data *charger, int set) |
| { |
| int i = 0; |
| |
| switch (set) { |
| case P9220_HEADROOM_0: |
| for(i=0; i<6; i++) { |
| p9220_reg_write(charger->client, P9220_VRECT_SET_REG, 0x0); |
| msleep(50); |
| } |
| break; |
| case P9220_HEADROOM_1: |
| for(i=0; i<6; i++) { |
| p9220_reg_write(charger->client, P9220_VRECT_SET_REG, 0x36); |
| msleep(50); |
| } |
| break; |
| case P9220_HEADROOM_2: |
| for(i=0; i<6; i++) { |
| p9220_reg_write(charger->client, P9220_VRECT_SET_REG, 0x61); |
| msleep(50); |
| } |
| break; |
| case P9220_HEADROOM_3: |
| for(i=0; i<6; i++) { |
| p9220_reg_write(charger->client, P9220_VRECT_SET_REG, 0x7f); |
| msleep(50); |
| } |
| break; |
| case P9220_HEADROOM_4: |
| for(i=0; i<6; i++) { |
| p9220_reg_write(charger->client, P9220_VRECT_SET_REG, 0x06); |
| msleep(50); |
| } |
| break; |
| case P9220_HEADROOM_5: |
| for(i=0; i<6; i++) { |
| p9220_reg_write(charger->client, P9220_VRECT_SET_REG, 0x10); |
| msleep(50); |
| } |
| break; |
| default: |
| pr_info("%s no headroom mode\n", __func__); |
| break; |
| } |
| } |
| |
| void p9220_mis_align(struct p9220_charger_data *charger) |
| { |
| pr_info("%s: Reset M0\n",__func__); |
| if (charger->pdata->cable_type == P9220_PAD_MODE_WPC_AFC || |
| charger->pdata->cable_type == P9220_PAD_MODE_PMA) |
| p9220_reg_write(charger->client, 0x3040, 0x80); /*restart M0 */ |
| } |
| |
| int p9220_get_firmware_version(struct p9220_charger_data *charger, int firm_mode) |
| { |
| int version = -1; |
| int ret; |
| u8 otp_fw_major[2] = {0,}; |
| u8 otp_fw_minor[2] = {0,}; |
| u8 tx_fw_major[2] = {0,}; |
| u8 tx_fw_minor[2] = {0,}; |
| |
| switch (firm_mode) { |
| case P9220_RX_FIRMWARE: |
| ret = p9220_reg_read(charger->client, P9220_OTP_FW_MAJOR_REV_L_REG, &otp_fw_major[0]); |
| ret = p9220_reg_read(charger->client, P9220_OTP_FW_MAJOR_REV_H_REG, &otp_fw_major[1]); |
| if (ret >= 0) { |
| version = otp_fw_major[0] | (otp_fw_major[1] << 8); |
| } |
| pr_info("%s rx major firmware version 0x%x \n", __func__, version); |
| |
| ret = p9220_reg_read(charger->client, P9220_OTP_FW_MINOR_REV_L_REG, &otp_fw_minor[0]); |
| ret = p9220_reg_read(charger->client, P9220_OTP_FW_MINOR_REV_H_REG, &otp_fw_minor[1]); |
| if (ret >= 0) { |
| version = otp_fw_minor[0] | (otp_fw_minor[1] << 8); |
| } |
| pr_info("%s rx minor firmware version 0x%x \n", __func__, version); |
| break; |
| case P9220_TX_FIRMWARE: |
| ret = p9220_reg_read(charger->client, P9220_SRAM_FW_MAJOR_REV_L_REG, &tx_fw_major[0]); |
| ret = p9220_reg_read(charger->client, P9220_SRAM_FW_MAJOR_REV_H_REG, &tx_fw_major[1]); |
| if (ret >= 0) { |
| version = tx_fw_major[0] | (tx_fw_major[1] << 8); |
| } |
| pr_info("%s tx major firmware version 0x%x \n", __func__, version); |
| |
| ret = p9220_reg_read(charger->client, P9220_SRAM_FW_MINOR_REV_L_REG, &tx_fw_minor[0]); |
| ret = p9220_reg_read(charger->client, P9220_SRAM_FW_MINOR_REV_H_REG, &tx_fw_minor[1]); |
| if (ret >= 0) { |
| version = tx_fw_minor[0] | (tx_fw_minor[1] << 8); |
| } |
| pr_info("%s tx minor firmware version 0x%x \n", __func__, version); |
| break; |
| default: |
| pr_err("%s Wrong firmware mode \n", __func__); |
| version = -1; |
| break; |
| } |
| |
| return version; |
| } |
| |
| int p9220_get_ic_grade(struct p9220_charger_data *charger, int read_mode) |
| { |
| u8 grade; |
| int ret; |
| |
| switch (read_mode) { |
| case P9220_IC_GRADE: |
| ret = p9220_reg_read(charger->client, P9220_CHIP_REVISION_REG, &grade); |
| |
| if(ret >= 0) { |
| grade &= P9220_CHIP_GRADE_MASK; |
| pr_info("%s ic grade = %d \n", __func__, grade); |
| ret = grade; |
| } |
| else |
| ret = -1; |
| break; |
| case P9220_IC_VERSION: |
| ret = p9220_reg_read(charger->client, P9220_CHIP_REVISION_REG, &grade); |
| |
| if(ret >= 0) { |
| grade &= P9220_CHIP_REVISION_MASK; |
| pr_info("%s ic version = %d \n", __func__, grade); |
| ret = grade; |
| } |
| else |
| ret = -1; |
| break; |
| case P9220_IC_VENDOR: |
| ret = -1; |
| break; |
| default : |
| ret = -1; |
| break; |
| } |
| return ret; |
| } |
| |
| void p9220_wireless_chg_init(struct p9220_charger_data *charger) |
| { |
| pr_info("%s \n", __func__); |
| |
| p9220_set_vout(charger, P9220_VOUT_5V); |
| } |
| |
| static int datacmp(const char *cs, const char *ct, int count) |
| { |
| unsigned char c1, c2; |
| |
| while (count) { |
| c1 = *cs++; |
| c2 = *ct++; |
| if (c1 != c2) { |
| pr_err("%s, cnt %d\n", __func__, count); |
| return c1 < c2 ? -1 : 1; |
| } |
| count--; |
| } |
| return 0; |
| } |
| static int LoadOTPLoaderInRAM(struct p9220_charger_data *charger, u16 addr) |
| { |
| int i, size; |
| u8 data[1024]; |
| if (p9220_reg_multi_write(charger->client, addr, OTPBootloader, sizeof(OTPBootloader)) < 0) { |
| pr_err("%s,fail", __func__); |
| } |
| size = sizeof(OTPBootloader); |
| i = 0; |
| while(size > 0) { |
| if (p9220_reg_multi_read(charger->client, addr+i, data+i, 16) < 0) { |
| pr_err("%s, read failed(%d)", __func__, addr+i); |
| return 0; |
| } |
| i += 16; |
| size -= 16; |
| } |
| size = sizeof(OTPBootloader); |
| if (datacmp(data, OTPBootloader, size)) { |
| pr_err("%s, data is not matched\n", __func__); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static int p9220_firmware_verify(struct p9220_charger_data *charger) |
| { |
| int ret = 0; |
| const u16 sendsz = 16; |
| size_t i = 0; |
| int block_len = 0; |
| int block_addr = 0; |
| u8 rdata[sendsz+2]; |
| |
| /* I2C WR to prepare boot-loader write */ |
| |
| if (p9220_reg_write(charger->client, 0x3C00, 0x80) < 0) { |
| pr_err("%s: reset FDEM error\n", __func__); |
| return 0; |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3000, 0x5a) < 0) { |
| pr_err("%s: key error\n", __func__); |
| return 0; |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3040, 0x11) < 0) { |
| pr_err("%s: halt M0, OTP_I2C_EN set error\n", __func__); |
| return 0; |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3C04, 0x04) < 0) { |
| pr_err("%s: OTP_VRR 2.98V error\n", __func__); |
| return 0; |
| } |
| |
| if (p9220_reg_write(charger->client, 0x5C00, 0x11) < 0) { |
| pr_err("%s: OTP_CTRL VPP_EN set error\n", __func__); |
| return 0; |
| } |
| |
| dev_err(&charger->client->dev, "%s, request_firmware\n", __func__); |
| ret = request_firmware(&charger->firm_data_bin, P9220S_OTP_FW_HEX_PATH, |
| &charger->client->dev); |
| if ( ret < 0) { |
| dev_err(&charger->client->dev, "%s: failed to request firmware %s (%d) \n", |
| __func__, P9220S_OTP_FW_HEX_PATH, ret); |
| return 0; |
| } |
| ret = 1; |
| wake_lock(&charger->wpc_update_lock); |
| for (i = 0; i < charger->firm_data_bin->size; i += sendsz) { |
| block_len = (i + sendsz) > charger->firm_data_bin->size ? charger->firm_data_bin->size - i : sendsz; |
| block_addr = 0x8000 + i; |
| |
| if (p9220_reg_multi_read(charger->client, block_addr, rdata, block_len) < 0) { |
| pr_err("%s, read failed\n", __func__); |
| ret = 0; |
| break; |
| } |
| if (datacmp(charger->firm_data_bin->data + i, rdata, block_len)) { |
| pr_err("%s, verify data is not matched.\n", __func__); |
| ret = -1; |
| break; |
| } |
| } |
| release_firmware(charger->firm_data_bin); |
| |
| wake_unlock(&charger->wpc_update_lock); |
| return ret; |
| } |
| |
| static int p9220_reg_multi_write_verify(struct i2c_client *client, u16 reg, const u8 * val, int size) |
| { |
| int ret = 0; |
| const int sendsz = 16; |
| int cnt = 0; |
| int retry_cnt = 0; |
| unsigned char data[sendsz+2]; |
| u8 rdata[sendsz+2]; |
| |
| // dev_dbg(&client->dev, "%s: size: 0x%x\n", __func__, size); |
| while(size > sendsz) { |
| data[0] = (reg+cnt) >>8; |
| data[1] = (reg+cnt) & 0xff; |
| memcpy(data+2, val+cnt, sendsz); |
| // dev_dbg(&client->dev, "%s: addr: 0x%x, cnt: 0x%x\n", __func__, reg+cnt, cnt); |
| ret = i2c_master_send(client, data, sendsz+2); |
| if (ret < sendsz+2) { |
| dev_err(&client->dev, "%s: i2c write error, reg: 0x%x\n", __func__, reg); |
| return ret < 0 ? ret : -EIO; |
| } |
| if (p9220_reg_multi_read(client, reg+cnt, rdata, sendsz) < 0) { |
| pr_err("%s, read failed(%d)\n", __func__, reg+cnt); |
| return -1; |
| } |
| if (datacmp(val+cnt, rdata, sendsz)) { |
| pr_err("%s, data is not matched. retry(%d)\n", __func__, retry_cnt); |
| retry_cnt++; |
| if(retry_cnt > 4) { |
| pr_err("%s, data is not matched. write failed\n", __func__); |
| retry_cnt = 0; |
| return -1; |
| } |
| continue; |
| } |
| // pr_debug("%s, data is matched!\n", __func__); |
| cnt += sendsz; |
| size -= sendsz; |
| retry_cnt = 0; |
| } |
| while (size > 0) { |
| data[0] = (reg+cnt) >>8; |
| data[1] = (reg+cnt) & 0xff; |
| memcpy(data+2, val+cnt, size); |
| // dev_dbg(&client->dev, "%s: addr: 0x%x, cnt: 0x%x, size: 0x%x\n", __func__, reg+cnt, cnt, size); |
| ret = i2c_master_send(client, data, size+2); |
| if (ret < size+2) { |
| dev_err(&client->dev, "%s: i2c write error, reg: 0x%x\n", __func__, reg); |
| return ret < 0 ? ret : -EIO; |
| } |
| if (p9220_reg_multi_read(client, reg+cnt, rdata, size) < 0) { |
| pr_err("%s, read failed(%d)\n", __func__, reg+cnt); |
| return -1; |
| } |
| if (datacmp(val+cnt, rdata, size)) { |
| pr_err("%s, data is not matched. retry(%d)\n", __func__, retry_cnt); |
| retry_cnt++; |
| if(retry_cnt > 4) { |
| pr_err("%s, data is not matched. write failed\n", __func__); |
| retry_cnt = 0; |
| return -1; |
| } |
| continue; |
| } |
| size = 0; |
| pr_err("%s, data is matched!\n", __func__); |
| } |
| return ret; |
| } |
| |
| static int p9220_TxFW_SRAM(struct p9220_charger_data *charger, const u8 * srcData, int fw_size) |
| { |
| const u8 clear_data[] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| u16 addr; |
| u8 temp; |
| int ret; |
| |
| pr_info("%s TX FW update Start \n",__func__); |
| |
| if (p9220_reg_write(charger->client, 0x3000, 0x5a) < 0) { |
| pr_err("%s: write key error\n", __func__); |
| return false; |
| } |
| if (p9220_reg_write(charger->client, 0x3040, 0x10) < 0) { |
| pr_err("%s: halt M0 error\n", __func__); |
| return false; |
| } |
| |
| /* clear 0x0000 to 0x1FFF */ |
| if (p9220_clear_sram(charger->client, 0x0000, clear_data, 0x2000) < 0) { |
| pr_err("%s: clear memory error\n", __func__); |
| return false; |
| } |
| addr = 0x0800; |
| if (p9220_reg_multi_write_verify(charger->client, addr, srcData, fw_size) < 0) { |
| pr_err("%s: write fail", __func__); |
| return false; |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3000, 0x5a) < 0) { |
| pr_err("%s: write key error..\n", __func__); |
| return false; |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3048, 0xD0) < 0) { |
| pr_err("%s: remapping error..\n", __func__); |
| return false; |
| } |
| |
| p9220_reg_write(charger->client, 0x3040, 0x80); |
| |
| pr_err("TX firmware update finished.\n"); |
| ret = p9220_reg_read(charger->client, P9220_SYS_OP_MODE_REG, &temp); |
| pr_info("%s: SYS_OP_MODE 0x%x, ret: %d\n", __func__, temp, ret); |
| return true; |
| } |
| |
| static int PgmOTPwRAM(struct p9220_charger_data *charger, unsigned short OtpAddr, |
| const u8 * srcData, int srcOffs, int size) |
| { |
| int i, j, cnt; |
| int block_len = 0; |
| u8 fw_major[2] = {0,}; |
| u8 fw_minor[2] = {0,}; |
| |
| p9220_reg_read(charger->client, P9220_OTP_FW_MAJOR_REV_L_REG, &fw_major[0]); |
| p9220_reg_read(charger->client, P9220_OTP_FW_MAJOR_REV_H_REG, &fw_major[1]); |
| p9220_reg_read(charger->client, P9220_OTP_FW_MINOR_REV_L_REG, &fw_minor[0]); |
| p9220_reg_read(charger->client, P9220_OTP_FW_MINOR_REV_H_REG, &fw_minor[1]); |
| |
| if (p9220_reg_write(charger->client, 0x3000, 0x5a) < 0) { |
| pr_err("%s: write key error\n", __func__); |
| return false; // write key |
| } |
| if (p9220_reg_write(charger->client, 0x3040, 0x10) < 0) { |
| pr_err("%s: halt M0 error\n", __func__); |
| return false; // halt M0 |
| } |
| if (!LoadOTPLoaderInRAM(charger, 0x1c00)){ |
| pr_err("%s: LoadOTPLoaderInRAM error\n", __func__); |
| return false; // make sure load address and 1KB size are OK |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3048, 0x80) < 0) { |
| pr_err("%s: map RAM to OTP error\n", __func__); |
| return false; // map RAM to OTP |
| } |
| p9220_reg_write(charger->client, 0x3040, 0x80); |
| msleep(100); |
| |
| for (i = 0; i < size; i += 128) // program pages of 128 bytes |
| { |
| u8 sBuf[136] = {0,}; |
| u16 StartAddr = (u16)i; |
| u16 CheckSum = StartAddr; |
| u16 CodeLength = 128; |
| |
| block_len = (i + 128) > size ? size - i : 128; |
| if (block_len == 128) { |
| memcpy(sBuf + 8, srcData + i + srcOffs, 128); |
| } else { |
| memset(sBuf, 0, 136); |
| memcpy(sBuf + 8, srcData + i + srcOffs, block_len); |
| } |
| |
| for (j = 127; j >= 0; j--) |
| { |
| if (sBuf[j + 8] != 0) |
| break; |
| else |
| CodeLength--; |
| } |
| if (CodeLength == 0) |
| continue; // skip programming if nothing to program |
| for (; j >= 0; j--) |
| CheckSum += sBuf[j + 8]; // add the non zero values |
| CheckSum += CodeLength; // finish calculation of the check sum |
| |
| memcpy(sBuf+2, &StartAddr,2); |
| memcpy(sBuf+4, &CodeLength,2); |
| memcpy(sBuf+6, &CheckSum,2); |
| |
| if (p9220_reg_multi_write_verify(charger->client, 0x400, sBuf, CodeLength + 8) < 0) |
| { |
| pr_err("ERROR: on writing to OTP buffer"); |
| return false; |
| } |
| sBuf[0] = 1; |
| if (p9220_reg_write(charger->client, 0x400, sBuf[0]) < 0) |
| { |
| pr_err("ERROR: on OTP buffer validation"); |
| return false; |
| } |
| |
| cnt = 0; |
| do |
| { |
| msleep(20); |
| if (p9220_reg_read(charger->client, 0x400, sBuf) < 0) |
| { |
| pr_err("ERROR: on readign OTP buffer status(%d)", cnt); |
| return false; |
| } |
| if (cnt > 1000) { |
| pr_err("ERROR: time out on buffer program to OTP"); |
| break; |
| } |
| cnt++; |
| } while (sBuf[0] == 1); |
| |
| if (sBuf[0] != 2) // not OK |
| { |
| pr_err("ERROR: buffer write to OTP returned status %d ",sBuf[0]); |
| return false; |
| } |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3000, 0x5a) < 0) { |
| pr_err("%s: write key error..\n", __func__); |
| return false; // write key |
| } |
| if (p9220_reg_write(charger->client, 0x3048, 0x00) < 0) { |
| pr_err("%s: remove code remapping error..\n", __func__); |
| return false; // remove code remapping |
| } |
| |
| pr_err("OTP Programming finished in"); |
| pr_info("%s------------------------------------------------- \n", __func__); |
| return true; |
| } |
| |
| static int p9220_runtime_sram_change(struct p9220_charger_data *charger) |
| { |
| int ret, i = 0; |
| u8 reg; |
| |
| pr_info("%s \n", __func__); |
| |
| do { |
| ret = p9220_reg_write(charger->client, 0x5834, adc_cal); |
| ret = p9220_reg_read(charger->client, 0x5834, ®); |
| pr_info("%s [%d] otp : 0x%x, sram : 0x%x \n", __func__, i, adc_cal, reg); |
| if(i > 10 || ret < 0) |
| return false; |
| msleep(10); |
| i++; |
| } while(reg != adc_cal); |
| |
| return true; |
| } |
| |
| int p9220_runtime_sram_preprocess(struct p9220_charger_data *charger) |
| { |
| u8 reg; |
| u8 pad_mode; |
| |
| pr_info("%s \n", __func__); |
| |
| if(gpio_get_value(charger->pdata->wpc_det)) { |
| pr_info("%s it is wireless lpm \n", __func__); |
| p9220_reg_read(charger->client, P9220_SYS_OP_MODE_REG, &pad_mode); |
| pr_info("%s pad_mode = %d \n", __func__, pad_mode); |
| |
| if(pad_mode & P9220_SYS_MODE_PMA) |
| return true; |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3000, 0x5a) < 0) { |
| pr_err("%s: failed unlock register\n", __func__); |
| } |
| |
| if (p9220_reg_write(charger->client, 0x3040, 0x11) < 0) { |
| pr_err("%s: failed stop process\n", __func__); |
| } |
| |
| //write 1 at bit0 of 0xbfbe |
| if(p9220_reg_read(charger->client, 0xbfbe, ®) < 0) |
| adc_cal = 0; |
| else { |
| adc_cal = reg = reg | 0x01; |
| pr_info("%s 0xbfbe = 0x%x \n", __func__, reg); |
| } |
| |
| return true; |
| } |
| |
| int p9220_firmware_update(struct p9220_charger_data *charger, int cmd) |
| { |
| struct file *fp; |
| mm_segment_t old_fs; |
| long fsize, nread; |
| int ret = 0; |
| const u8 *fw_img; |
| |
| pr_info("%s firmware update mode is = %d \n", __func__, cmd); |
| |
| switch(cmd) { |
| case SEC_WIRELESS_RX_SDCARD_MODE: |
| charger->pdata->otp_firmware_result = P9220_FW_RESULT_DOWNLOADING; |
| msleep(200); |
| disable_irq(charger->pdata->irq_wpc_int); |
| disable_irq(charger->pdata->irq_wpc_det); |
| old_fs = get_fs(); |
| set_fs(KERNEL_DS); |
| |
| fp = filp_open(P9220S_FW_SDCARD_BIN_PATH, O_RDONLY, S_IRUSR); |
| |
| if (IS_ERR(fp)) { |
| pr_err("%s: failed to open %s\n", __func__, P9220S_FW_SDCARD_BIN_PATH); |
| ret = -ENOENT; |
| set_fs(old_fs); |
| return ret; |
| } |
| |
| fsize = fp->f_path.dentry->d_inode->i_size; |
| pr_err("%s: start, file path %s, size %ld Bytes\n", |
| __func__, P9220S_FW_SDCARD_BIN_PATH, fsize); |
| |
| fw_img = kmalloc(fsize, GFP_KERNEL); |
| |
| if (fw_img == NULL) { |
| pr_err("%s, kmalloc failed\n", __func__); |
| ret = -EFAULT; |
| goto malloc_error; |
| } |
| |
| nread = vfs_read(fp, (char __user *)fw_img, |
| fsize, &fp->f_pos); |
| pr_err("nread %ld Bytes\n", nread); |
| if (nread != fsize) { |
| pr_err("failed to read firmware file, nread %ld Bytes\n", nread); |
| ret = -EIO; |
| goto read_err; |
| } |
| |
| filp_close(fp, current->files); |
| set_fs(old_fs); |
| p9220_otp_update = 1; |
| PgmOTPwRAM(charger, 0 ,fw_img, 0, fsize); |
| p9220_otp_update = 0; |
| |
| kfree(fw_img); |
| enable_irq(charger->pdata->irq_wpc_int); |
| enable_irq(charger->pdata->irq_wpc_det); |
| break; |
| case SEC_WIRELESS_RX_BUILT_IN_MODE: |
| charger->pdata->otp_firmware_result = P9220_FW_RESULT_DOWNLOADING; |
| msleep(200); |
| disable_irq(charger->pdata->irq_wpc_int); |
| disable_irq(charger->pdata->irq_wpc_det); |
| dev_err(&charger->client->dev, "%s, request_firmware\n", __func__); |
| ret = request_firmware(&charger->firm_data_bin, P9220S_OTP_FW_HEX_PATH, |
| &charger->client->dev); |
| if ( ret < 0) { |
| dev_err(&charger->client->dev, "%s: failed to request firmware %s (%d) \n", __func__, P9220S_OTP_FW_HEX_PATH, ret); |
| charger->pdata->otp_firmware_result = P9220_FW_RESULT_FAIL; |
| return -EINVAL; |
| } |
| wake_lock(&charger->wpc_update_lock); |
| pr_info("%s data size = %ld \n", __func__, charger->firm_data_bin->size); |
| p9220_otp_update = 1; |
| ret = PgmOTPwRAM(charger, 0 ,charger->firm_data_bin->data, 0, charger->firm_data_bin->size); |
| p9220_otp_update = 0; |
| release_firmware(charger->firm_data_bin); |
| |
| charger->pdata->otp_firmware_ver = p9220_get_firmware_version(charger, P9220_RX_FIRMWARE); |
| charger->pdata->wc_ic_grade = p9220_get_ic_grade(charger, P9220_IC_GRADE); |
| charger->pdata->wc_ic_rev = p9220_get_ic_grade(charger, P9220_IC_VERSION); |
| |
| if(ret) |
| charger->pdata->otp_firmware_result = P9220_FW_RESULT_PASS; |
| else |
| charger->pdata->otp_firmware_result = P9220_FW_RESULT_FAIL; |
| enable_irq(charger->pdata->irq_wpc_int); |
| enable_irq(charger->pdata->irq_wpc_det); |
| wake_unlock(&charger->wpc_update_lock); |
| break; |
| case SEC_WIRELESS_TX_ON_MODE: |
| charger->pdata->tx_firmware_result = P9220_FW_RESULT_DOWNLOADING; |
| msleep(200); |
| dev_err(&charger->client->dev, "%s, built in sram mode on \n", __func__); |
| ret = request_firmware(&charger->firm_data_bin, P9220S_SRAM_FW_HEX_PATH, &charger->client->dev); |
| |
| if ( ret < 0) { |
| dev_err(&charger->client->dev, "%s: failed to request firmware %s (%d) \n", __func__, |
| P9220S_SRAM_FW_HEX_PATH, ret); |
| charger->pdata->tx_firmware_result = P9220_FW_RESULT_FAIL; |
| return -EINVAL; |
| } |
| |
| wake_lock(&charger->wpc_update_lock); |
| pr_info("%s data size = %ld \n", __func__, charger->firm_data_bin->size); |
| ret = p9220_TxFW_SRAM(charger, charger->firm_data_bin->data, charger->firm_data_bin->size); |
| release_firmware(charger->firm_data_bin); |
| |
| charger->pdata->tx_firmware_ver = p9220_get_firmware_version(charger, P9220_TX_FIRMWARE); |
| |
| if(ret) { |
| charger->pdata->tx_firmware_result = P9220_FW_RESULT_PASS; |
| charger->pdata->tx_status = SEC_TX_STANDBY; |
| } else { |
| charger->pdata->tx_firmware_result = P9220_FW_RESULT_FAIL; |
| charger->pdata->tx_status = SEC_TX_ERROR; |
| } |
| |
| charger->pdata->cable_type = P9220_PAD_MODE_TX; |
| wake_unlock(&charger->wpc_update_lock); |
| break; |
| case SEC_WIRELESS_TX_OFF_MODE: |
| charger->pdata->tx_firmware_result = P9220_FW_RESULT_DOWNLOADING; |
| charger->pdata->cable_type = P9220_PAD_MODE_NONE; |
| dev_err(&charger->client->dev, "%s, built in sram mode off \n", __func__); |
| charger->pdata->tx_status = SEC_TX_OFF; |
| break; |
| case SEC_WIRELESS_RX_INIT: |
| p9220_runtime_sram_preprocess(charger); /* get 0xBFBE value */ |
| break; |
| default: |
| return -1; |
| break; |
| } |
| |
| pr_info("%s --------------------------------------------------------------- \n", __func__); |
| |
| return 0; |
| |
| read_err: |
| kfree(fw_img); |
| malloc_error: |
| filp_close(fp, current->files); |
| set_fs(old_fs); |
| return ret; |
| } |
| |
| static int p9220_chg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct p9220_charger_data *charger = |
| container_of(psy, struct p9220_charger_data, psy_chg); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| pr_info("%s charger->pdata->cs100_status %d \n",__func__,charger->pdata->cs100_status); |
| val->intval = charger->pdata->cs100_status; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| case POWER_SUPPLY_PROP_HEALTH: |
| return -ENODATA; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| if(charger->pdata->ic_on_mode || charger->pdata->is_charging) { |
| val->intval = p9220_get_vout(charger); |
| } else |
| val->intval = 0; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| case POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL: |
| case POWER_SUPPLY_PROP_CHARGE_POWERED_OTG_CONTROL: |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| return -ENODATA; |
| case POWER_SUPPLY_PROP_ONLINE: |
| pr_info("%s cable_type =%d \n ", __func__, charger->pdata->cable_type); |
| val->intval = charger->pdata->cable_type; |
| break; |
| case POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION: |
| val->intval = charger->pdata->vout_status; |
| break; |
| case POWER_SUPPLY_PROP_MANUFACTURER: |
| if (val->intval == SEC_WIRELESS_OTP_FIRM_RESULT) { |
| pr_info("%s otp firmware result = %d,\n",__func__, charger->pdata->otp_firmware_result); |
| val->intval = charger->pdata->otp_firmware_result; |
| } else if(val->intval == SEC_WIRELESS_IC_GRADE) { |
| val->intval = p9220_get_ic_grade(charger, P9220_IC_GRADE); |
| } else if(val->intval == SEC_WIRELESS_IC_REVISION) { |
| val->intval = p9220_get_ic_grade(charger, P9220_IC_VERSION); |
| } else if(val->intval == SEC_WIRELESS_OTP_FIRM_VER_BIN) { |
| val->intval = P9220_OTP_FIRM_VERSION; |
| } else if(val->intval == SEC_WIRELESS_OTP_FIRM_VER) { |
| val->intval = p9220_get_firmware_version(charger, P9220_RX_FIRMWARE); |
| } else if(val->intval == SEC_WIRELESS_TX_FIRM_RESULT) { |
| val->intval = charger->pdata->tx_firmware_result; |
| } else if (val->intval == SEC_WIRELESS_TX_FIRM_VER) { |
| val->intval = charger->pdata->tx_firmware_ver; |
| } else if(val->intval == SEC_TX_FIRMWARE) { |
| val->intval = charger->pdata->tx_status; |
| } else if(val->intval == SEC_WIRELESS_OTP_FIRM_VERIFY) { |
| val->intval = p9220_firmware_verify(charger); |
| } else{ |
| val->intval = -1; |
| pr_err("%s wrong mode \n", __func__); |
| } |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_NOW: /* vout */ |
| if(charger->pdata->ic_on_mode || charger->pdata->is_charging) { |
| val->intval = p9220_get_adc(charger, P9220_ADC_VOUT); |
| } else |
| val->intval = 0; |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_AVG: /* vrect */ |
| if(charger->pdata->ic_on_mode || charger->pdata->is_charging) { |
| val->intval = p9220_get_adc(charger, P9220_ADC_VRECT); |
| } else |
| val->intval = 0; |
| break; |
| case POWER_SUPPLY_PROP_SCOPE: |
| val->intval = p9220_get_adc(charger, val->intval); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| #if defined(CONFIG_UPDATE_BATTERY_DATA) |
| static int p9220_chg_parse_dt(struct device *dev, p9220_charger_platform_data_t *pdata); |
| #endif |
| static int p9220_chg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct p9220_charger_data *charger = |
| container_of(psy, struct p9220_charger_data, psy_chg); |
| int vout, vrect, iout, i = 0; |
| /* int ret; */ |
| union power_supply_propval value; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| if(val->intval == POWER_SUPPLY_STATUS_FULL) { |
| pr_info("%s set cs100 \n", __func__); |
| if (charger->pdata->cable_type == SEC_WIRELESS_PAD_WPC) { |
| /* set fake FOD values before send cs100 */ |
| p9220_fod_set_cs100(charger); |
| } |
| charger->pdata->cs100_status = p9220_send_cs100(charger); |
| } else if(val->intval == POWER_SUPPLY_STATUS_NOT_CHARGING) { |
| p9220_mis_align(charger); |
| } else if(val->intval == POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE) { |
| p9220_fod_set_cv(charger); |
| } |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| value.intval = charger->pdata->cable_type; |
| psy_do_property("wireless", set, POWER_SUPPLY_PROP_ONLINE, value); |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| if(val->intval == POWER_SUPPLY_HEALTH_OVERHEAT || |
| val->intval == POWER_SUPPLY_HEALTH_OVERHEATLIMIT || |
| val->intval == POWER_SUPPLY_HEALTH_COLD) { |
| pr_info("%s ept-ot \n", __func__); |
| p9220_send_eop(charger, val->intval); |
| } |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| if(val->intval == POWER_SUPPLY_TYPE_WIRELESS || |
| val->intval == POWER_SUPPLY_TYPE_HV_WIRELESS || |
| val->intval == POWER_SUPPLY_TYPE_PMA_WIRELESS ) { |
| charger->pdata->ic_on_mode = true; |
| } else { |
| charger->pdata->ic_on_mode = false; |
| } |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| charger->pdata->siop_level = val->intval; |
| if(charger->pdata->siop_level == 100) { |
| pr_info("%s vrect headroom set ROOM 2, siop = %d \n", __func__, charger->pdata->siop_level); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_2); |
| } else if(charger->pdata->siop_level < 100) { |
| pr_info("%s vrect headroom set ROOM 0, siop = %d \n", __func__, charger->pdata->siop_level); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_0); |
| } |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL: |
| if(val->intval) { |
| charger->pdata->ic_on_mode = true; |
| } else { |
| charger->pdata->ic_on_mode = false; |
| } |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_POWERED_OTG_CONTROL: |
| p9220_firmware_update(charger, val->intval); |
| pr_info("%s rx result = %d, tx result = %d \n",__func__, |
| charger->pdata->otp_firmware_result,charger->pdata->tx_firmware_result); |
| break; |
| case POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION: |
| if (val->intval == WIRELESS_VOUT_NORMAL_VOLTAGE) { |
| pr_info("%s: Wireless Vout forced set to 5V. + PAD CMD\n",__func__); |
| for(i = 0; i < CMD_CNT; i++) { |
| p9220_send_command(charger, P9220_AFC_CONF_5V); |
| msleep(250); |
| } |
| } else if (val->intval == WIRELESS_VOUT_HIGH_VOLTAGE) { |
| pr_info("%s: Wireless Vout forced set to 9V. + PAD CMD\n",__func__); |
| for(i = 0; i < CMD_CNT; i++) { |
| p9220_send_command(charger, P9220_AFC_CONF_9V); |
| msleep(250); |
| } |
| } else if (val->intval == WIRELESS_VOUT_CC_CV_VOUT) { |
| p9220_set_vout(charger, P9220_VOUT_CC_CV); |
| pr_info("%s: Wireless Vout forced set to %dmV\n", |
| __func__, charger->pdata->wpc_cc_cv_vout); |
| } else if (val->intval == WIRELESS_VOUT_CV_CALL) { |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_3); |
| msleep(500); |
| p9220_set_vout(charger, P9220_VOUT_CV_CALL); |
| msleep(500); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_0); |
| pr_info("%s: Wireless Vout forced set to %dmV\n", |
| __func__, charger->pdata->wpc_cv_call_vout); |
| } else if (val->intval == WIRELESS_VOUT_CC_CALL) { |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_3); |
| msleep(500); |
| p9220_set_vout(charger, P9220_VOUT_CC_CALL); |
| msleep(500); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_0); |
| pr_info("%s: Wireless Vout forced set to %dmV\n", |
| __func__, charger->pdata->wpc_cc_call_vout); |
| } else if (val->intval == WIRELESS_VOUT_5V) { |
| p9220_set_vout(charger, P9220_VOUT_5V); |
| pr_info("%s: Wireless Vout forced set to 5V\n", __func__); |
| } else if (val->intval == WIRELESS_VOUT_9V) { |
| p9220_set_vout(charger, P9220_VOUT_9V); |
| pr_info("%s: Wireless Vout forced set to 9V\n", __func__); |
| } else if (val->intval == WIRELESS_VOUT_9V_OTG) { |
| p9220_set_vout(charger, P9220_VOUT_9V); |
| pr_info("%s: Wireless Vout forced set to 9V OTG\n", __func__); |
| } else if (val->intval == WIRELESS_PAD_FAN_OFF) { |
| pr_info("%s: fan off \n",__func__); |
| p9220_fan_control(charger, 0); |
| } else if (val->intval == WIRELESS_PAD_FAN_ON) { |
| pr_info("%s: fan on \n",__func__); |
| p9220_fan_control(charger, 1); |
| } else if (val->intval == WIRELESS_PAD_LED_OFF) { |
| pr_info("%s: led off \n",__func__); |
| p9220_led_control(charger, 0); |
| } else if (val->intval == WIRELESS_PAD_LED_ON) { |
| pr_info("%s: led on \n",__func__); |
| p9220_led_control(charger, 1); |
| } else if(val->intval == WIRELESS_VRECT_ADJ_ON) { |
| pr_info("%s: vrect adjust to have big headroom(defualt value) \n",__func__); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_1); |
| } else if(val->intval == WIRELESS_VRECT_ADJ_OFF) { |
| pr_info("%s: vrect adjust to have small headroom \n",__func__); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_0); |
| } else if(val->intval == WIRELESS_VRECT_ADJ_ROOM_0) { |
| pr_info("%s: vrect adjust to have headroom 0(0mV) \n",__func__); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_0); |
| } else if(val->intval == WIRELESS_VRECT_ADJ_ROOM_1) { |
| pr_info("%s: vrect adjust to have headroom 1(277mV) \n",__func__); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_1); |
| } else if(val->intval == WIRELESS_VRECT_ADJ_ROOM_2) { |
| pr_info("%s: vrect adjust to have headroom 2(497mV) \n",__func__); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_2); |
| } else if(val->intval == WIRELESS_VRECT_ADJ_ROOM_3) { |
| pr_info("%s: vrect adjust to have headroom 3(650mV) \n",__func__); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_3); |
| } else if(val->intval == WIRELESS_VRECT_ADJ_ROOM_4) { |
| pr_info("%s: vrect adjust to have headroom 4(30mV) \n",__func__); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_4); |
| } else if(val->intval == WIRELESS_VRECT_ADJ_ROOM_5) { |
| pr_info("%s: vrect adjust to have headroom 5(82mV) \n",__func__); |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_5); |
| } else if (val->intval == WIRELESS_CLAMP_ENABLE) { |
| pr_info("%s: enable clamp1, clamp2 for WPC modulation \n",__func__); |
| p9220_reg_update(charger->client, P9220_MOD_DEPTH_REG, 0x30, 0x30); |
| } else { |
| pr_info("%s: Unknown Command(%d)\n",__func__, val->intval); |
| } |
| break; |
| case POWER_SUPPLY_PROP_MANUFACTURER: |
| charger->pdata->otp_firmware_result = val->intval; |
| pr_info("%s otp_firmware result initialize (%d)\n",__func__, |
| charger->pdata->otp_firmware_result); |
| break; |
| #if defined(CONFIG_UPDATE_BATTERY_DATA) |
| case POWER_SUPPLY_PROP_POWER_DESIGN: |
| p9220_chg_parse_dt(charger->dev, charger->pdata); |
| break; |
| #endif |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| vout = p9220_get_adc(charger, P9220_ADC_VOUT); |
| vrect = p9220_get_adc(charger, P9220_ADC_VRECT); |
| iout = p9220_get_adc(charger, P9220_ADC_RX_IOUT); |
| pr_info("%s RX_VOUT = %dmV, RX_VRECT = %dmV, RX_IOUT = %dmA\n", __func__, vout, vrect, iout); |
| break; |
| case POWER_SUPPLY_PROP_SCOPE: |
| return -EINVAL; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #define FREQ_OFFSET 384000 /* 64*6000 */ |
| static void p9220_wpc_opfq_work(struct work_struct *work) |
| { |
| struct p9220_charger_data *charger = |
| container_of(work, struct p9220_charger_data, wpc_opfq_work.work); |
| |
| u16 op_fq; |
| u8 pad_mode; |
| union power_supply_propval value; |
| |
| p9220_reg_read(charger->client, P9220_SYS_OP_MODE_REG, &pad_mode); |
| if (pad_mode & P9220_PAD_MODE_WPC) { |
| op_fq = FREQ_OFFSET / p9220_get_adc(charger, P9220_ADC_OP_FRQ); |
| pr_info("%s: Operating FQ %dkHz(0x%x)\n", __func__, op_fq, op_fq); |
| if (op_fq > 230) { /* wpc threshold 230kHz */ |
| pr_info("%s: Reset M0\n",__func__); |
| p9220_reg_write(charger->client, 0x3040, 0x80); /*restart M0 */ |
| |
| charger->pdata->opfq_cnt++; |
| if (charger->pdata->opfq_cnt <= CMD_CNT) { |
| queue_delayed_work(charger->wqueue, &charger->wpc_opfq_work, msecs_to_jiffies(10000)); |
| return; |
| } |
| } |
| } else if (pad_mode & P9220_PAD_MODE_PMA) { |
| charger->pdata->cable_type = P9220_PAD_MODE_PMA; |
| value.intval = SEC_WIRELESS_PAD_PMA; |
| psy_do_property("wireless", set, POWER_SUPPLY_PROP_ONLINE, value); |
| } |
| charger->pdata->opfq_cnt = 0; |
| wake_unlock(&charger->wpc_opfq_lock); |
| |
| } |
| |
| static void p9220_wpc_det_work(struct work_struct *work) |
| { |
| struct p9220_charger_data *charger = |
| container_of(work, struct p9220_charger_data, wpc_det_work.work); |
| int wc_w_state; |
| union power_supply_propval value; |
| u8 pad_mode; |
| u8 vrect; |
| |
| wake_lock(&charger->wpc_wake_lock); |
| pr_info("%s\n",__func__); |
| wc_w_state = gpio_get_value(charger->pdata->wpc_det); |
| |
| if ((charger->wc_w_state == 0) && (wc_w_state == 1)) { |
| charger->pdata->vout_status = P9220_VOUT_5V; |
| |
| /* read firmware version */ |
| if(p9220_get_firmware_version(charger, P9220_RX_FIRMWARE) == P9220_OTP_FIRM_VERSION && adc_cal > 0) |
| p9220_runtime_sram_change(charger);/* change sram */ |
| |
| /* set fod value */ |
| if(charger->pdata->fod_data_check) |
| p9220_fod_set(charger); |
| |
| /* enable Mode Change INT */ |
| p9220_reg_update(charger->client, P9220_INT_ENABLE_L_REG, |
| P9220_STAT_MODE_CHANGE_MASK, P9220_STAT_MODE_CHANGE_MASK); |
| |
| /* read vrect adjust */ |
| p9220_reg_read(charger->client, P9220_VRECT_SET_REG, &vrect); |
| |
| pr_info("%s: wpc activated, set V_INT as PN\n",__func__); |
| |
| /* read pad mode */ |
| p9220_reg_read(charger->client, P9220_SYS_OP_MODE_REG, &pad_mode); |
| if(pad_mode & P9220_SYS_MODE_PMA) { |
| charger->pdata->cable_type = P9220_PAD_MODE_PMA; |
| value.intval = SEC_WIRELESS_PAD_PMA; |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| } else { |
| charger->pdata->cable_type = P9220_PAD_MODE_WPC; |
| value.intval = SEC_WIRELESS_PAD_WPC; |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| wake_lock(&charger->wpc_opfq_lock); |
| queue_delayed_work(charger->wqueue, &charger->wpc_opfq_work, msecs_to_jiffies(10000)); |
| } |
| |
| /* set request afc_tx */ |
| p9220_send_command(charger, P9220_REQUEST_AFC_TX); |
| #if 0 |
| /* set request TX_ID */ |
| p9220_send_command(charger, P9220_REQUEST_TX_ID); |
| #endif |
| |
| charger->pdata->is_charging = 1; |
| } else if ((charger->wc_w_state == 1) && (wc_w_state == 0)) { |
| |
| charger->pdata->cable_type = P9220_PAD_MODE_NONE; |
| charger->pdata->is_charging = 0; |
| charger->pdata->vout_status = P9220_VOUT_0V; |
| charger->pdata->opfq_cnt = 0; |
| |
| value.intval = SEC_WIRELESS_PAD_NONE; |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| pr_info("%s: wpc deactivated, set V_INT as PD\n",__func__); |
| |
| msleep(1000); |
| /* if vrect >= 3000mV and vout <= 2000mV, restart M0 */ |
| if (p9220_get_adc(charger, P9220_ADC_VRECT) >= 3000 && |
| p9220_get_adc(charger, P9220_ADC_VOUT) <= 2000) { |
| pr_err("%s Restart M0\n", __func__); |
| p9220_reg_write(charger->client, 0x3040, 0x80); /*restart M0 */ |
| } |
| |
| if(delayed_work_pending(&charger->wpc_opfq_work)) { |
| wake_unlock(&charger->wpc_opfq_lock); |
| cancel_delayed_work(&charger->wpc_opfq_work); |
| } |
| |
| cancel_delayed_work(&charger->wpc_isr_work); |
| cancel_delayed_work(&charger->wpc_opfq_work); |
| cancel_delayed_work(&charger->wpc_tx_id_work); |
| } |
| |
| pr_info("%s: w(%d to %d)\n", __func__, |
| charger->wc_w_state, wc_w_state); |
| |
| charger->wc_w_state = wc_w_state; |
| wake_unlock(&charger->wpc_wake_lock); |
| } |
| |
| static void p9220_wpc_isr_work(struct work_struct *work) |
| { |
| struct p9220_charger_data *charger = |
| container_of(work, struct p9220_charger_data, wpc_isr_work.work); |
| |
| u8 data, cmd_data, val_data; |
| int i; |
| union power_supply_propval value; |
| |
| if (!charger->wc_w_state) { |
| pr_info("%s: charger->wc_w_state is 0. exit wpc_isr_work.\n",__func__); |
| return; |
| } |
| |
| wake_lock(&charger->wpc_wake_lock); |
| pr_info("%s\n",__func__); |
| |
| p9220_reg_read(charger->client, P9220_TX_DATA_COMMAND, &cmd_data); |
| p9220_reg_read(charger->client, P9220_TX_DATA_VALUE0, &val_data); |
| |
| pr_info("%s: WPC Interrupt Occured, CMD : 0x%x, DATA : 0x%x\n", |
| __func__, cmd_data, val_data); |
| |
| if (cmd_data == 0x02) { |
| switch (val_data) { |
| case 0x0: |
| charger->pad_vout = PAD_VOUT_5V; |
| break; |
| case 0x1: |
| pr_info("%s data = 0x%x, might be 9V irq \n", __func__, val_data); |
| if (!gpio_get_value(charger->pdata->wpc_det)) { |
| wake_unlock(&charger->wpc_wake_lock); |
| return; |
| } |
| |
| p9220_send_command(charger, P9220_AFC_CONF_9V); |
| msleep(500); |
| charger->pdata->cable_type = P9220_PAD_MODE_WPC_AFC; |
| value.intval = SEC_WIRELESS_PAD_WPC_HV; |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| |
| for(i = 0; i < CMD_CNT - 1; i++) { |
| if (!gpio_get_value(charger->pdata->wpc_det)) { |
| wake_unlock(&charger->wpc_wake_lock); |
| return; |
| } |
| if (p9220_get_adc(charger, P9220_ADC_VOUT) > 7500) { |
| pr_info("%s 9V set is done \n", __func__); |
| break; |
| } else { |
| pr_info("%s send AFC_CONF_9V again \n", __func__); |
| p9220_send_command(charger, P9220_AFC_CONF_9V); |
| msleep(500); |
| } |
| } |
| |
| if(sleep_mode) { |
| pr_info("%s sleep mode, turn on fan \n", __func__); |
| p9220_fan_control(charger, true); |
| msleep(250); |
| |
| pr_info("%s sleep mode, turn off fan \n", __func__); |
| p9220_fan_control(charger, false); |
| msleep(250); |
| } |
| charger->pad_vout = PAD_VOUT_10V; |
| break; |
| case 0x2: |
| break; |
| case 0x3: |
| case 0x4: |
| case 0x5: |
| case 0x6: |
| break; |
| case 0x40: |
| pr_info("%s: WIRELESS BATTERY PACK\n", __func__); |
| charger->pdata->cable_type = P9220_PAD_MODE_WPC_PACK; |
| value.intval = SEC_WIRELESS_PAD_WPC_PACK; |
| psy_do_property("wireless", set, POWER_SUPPLY_PROP_ONLINE, value); |
| break; |
| case 0x41: |
| pr_info("%s: WIRELESS BATTERY PACK with TA\n", __func__); |
| charger->pdata->cable_type = P9220_PAD_MODE_WPC_PACK_TA; |
| value.intval = SEC_WIRELESS_PAD_WPC_PACK_TA; |
| psy_do_property("wireless", set, POWER_SUPPLY_PROP_ONLINE, value); |
| break; |
| default: |
| pr_info("%s: unsupport : 0x%x", __func__, data); |
| } |
| |
| queue_delayed_work(charger->wqueue, &charger->wpc_tx_id_work, msecs_to_jiffies(1000)); |
| } else if (cmd_data == 0x01) { |
| switch (val_data) { |
| case 0x00: |
| break; |
| case 0x30: |
| if (charger->pad_vout == PAD_VOUT_10V) { |
| charger->pdata->cable_type = P9220_PAD_MODE_WPC_STAND_HV; |
| value.intval = SEC_WIRELESS_PAD_WPC_STAND_HV; |
| } else { |
| charger->pdata->cable_type = P9220_PAD_MODE_WPC_STAND; |
| value.intval = SEC_WIRELESS_PAD_WPC_STAND; |
| } |
| pr_info("%s: STAND Wireless Charge PAD %s\n", __func__, |
| charger->pad_vout == PAD_VOUT_10V ? "HV" : ""); |
| break; |
| case 0x40: |
| charger->pdata->cable_type = P9220_PAD_MODE_WPC_PACK; |
| value.intval = SEC_WIRELESS_PAD_WPC_PACK; |
| pr_info("%s: WIRELESS BATTERY PACK\n", __func__); |
| break; |
| case 0x41: |
| charger->pdata->cable_type = P9220_PAD_MODE_WPC_PACK_TA; |
| value.intval = SEC_WIRELESS_PAD_WPC_PACK_TA; |
| pr_info("%s: WIRELESS BATTERY PACK with TA\n", __func__); |
| break; |
| default: |
| value.intval = charger->pdata->cable_type; |
| pr_info("%s: UNDEFINED PAD\n", __func__); |
| } |
| |
| psy_do_property("wireless", set, POWER_SUPPLY_PROP_ONLINE, value); |
| } |
| |
| wake_unlock(&charger->wpc_wake_lock); |
| } |
| |
| static void p9220_wpc_tx_id_work(struct work_struct *work) |
| { |
| struct p9220_charger_data *charger = |
| container_of(work, struct p9220_charger_data, wpc_tx_id_work.work); |
| |
| pr_info("%s\n",__func__); |
| |
| p9220_send_command(charger, P9220_REQUEST_TX_ID); |
| } |
| |
| static irqreturn_t p9220_wpc_det_irq_thread(int irq, void *irq_data) |
| { |
| struct p9220_charger_data *charger = irq_data; |
| |
| pr_info("%s !\n",__func__); |
| |
| queue_delayed_work(charger->wqueue, &charger->wpc_det_work, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t p9220_wpc_irq_thread(int irq, void *irq_data) |
| { |
| struct p9220_charger_data *charger = irq_data; |
| int wc_w_state_irq; |
| int ret; |
| u8 irq_src[2]; |
| u8 reg_data; |
| |
| pr_info("%s !\n",__func__); |
| wake_lock(&charger->wpc_wake_lock); |
| |
| ret = p9220_reg_read(charger->client, P9220_INT_L_REG, &irq_src[0]); |
| ret = p9220_reg_read(charger->client, P9220_INT_H_REG, &irq_src[1]); |
| |
| wc_w_state_irq = gpio_get_value(charger->pdata->wpc_int); |
| pr_info("%s wc_w_state_irq = %d\n", __func__, wc_w_state_irq); |
| |
| if (ret < 0) { |
| pr_err("%s: Failed to read interrupt source: %d\n", |
| __func__, ret); |
| wake_unlock(&charger->wpc_wake_lock); |
| return IRQ_NONE; |
| } |
| |
| pr_info("%s: interrupt source(0x%x)\n", __func__, irq_src[1] << 8 | irq_src[0]); |
| p9220_get_firmware_version(charger, P9220_RX_FIRMWARE); |
| |
| if(irq_src[0] & P9220_STAT_MODE_CHANGE_MASK) { |
| pr_info("%s MODE CHANGE IRQ ! \n", __func__); |
| ret = p9220_reg_read(charger->client, P9220_SYS_OP_MODE_REG, ®_data); |
| } |
| |
| if(irq_src[0] & P9220_STAT_TX_DATA_RECEIVED_MASK) { |
| pr_info("%s TX RECEIVED IRQ ! \n", __func__); |
| if(charger->pdata->cable_type == P9220_PAD_MODE_WPC_STAND || |
| charger->pdata->cable_type == P9220_PAD_MODE_WPC_STAND_HV) |
| pr_info("%s Don't run ISR_WORK for NO ACK ! \n", __func__); |
| else if(!delayed_work_pending(&charger->wpc_isr_work)) |
| queue_delayed_work(charger->wqueue, &charger->wpc_isr_work, msecs_to_jiffies(1000)); |
| } |
| |
| if(irq_src[1] & P9220_STAT_OVER_CURR_MASK) { |
| pr_info("%s OVER CURRENT IRQ ! \n", __func__); |
| } |
| |
| if(irq_src[1] & P9220_STAT_OVER_TEMP_MASK) { |
| pr_info("%s OVER TEMP IRQ ! \n", __func__); |
| } |
| |
| if(irq_src[1] & P9220_STAT_TX_CONNECT_MASK) { |
| pr_info("%s TX CONNECT IRQ ! \n", __func__); |
| charger->pdata->tx_status = SEC_TX_POWER_TRANSFER; |
| } |
| |
| msleep(5); |
| |
| /* clear intterupt */ |
| p9220_reg_write(charger->client, P9220_INT_CLEAR_L_REG, irq_src[0]); // clear int |
| p9220_reg_write(charger->client, P9220_INT_CLEAR_H_REG, irq_src[1]); // clear int |
| p9220_set_cmd_reg(charger, 0x20, P9220_CMD_CLEAR_INT_MASK); // command |
| |
| /* debug */ |
| ret = p9220_reg_read(charger->client, P9220_INT_L_REG, &irq_src[0]); |
| ret = p9220_reg_read(charger->client, P9220_INT_H_REG, &irq_src[1]); |
| wc_w_state_irq = gpio_get_value(charger->pdata->wpc_int); |
| pr_info("%s wc_w_state_irq = %d\n", __func__, wc_w_state_irq); |
| wake_unlock(&charger->wpc_wake_lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int p9220_chg_parse_dt(struct device *dev, |
| p9220_charger_platform_data_t *pdata) |
| { |
| int ret = 0; |
| struct device_node *np = dev->of_node; |
| enum of_gpio_flags irq_gpio_flags; |
| int len,i; |
| const u32 *p; |
| |
| if (!np) { |
| pr_err("%s np NULL\n", __func__); |
| return 1; |
| } else { |
| p = of_get_property(np, "battery,fod_data", &len); |
| if (p) { |
| len = len / sizeof(u32); |
| pdata->fod_data = kzalloc(sizeof(*pdata->fod_data) * len, GFP_KERNEL); |
| ret = of_property_read_u32_array(np, "battery,fod_data", |
| pdata->fod_data, len); |
| pdata->fod_data_check = 1; |
| |
| for(i = 0; i <len; i++) |
| pr_info("%s fod data = %d ",__func__,pdata->fod_data[i]); |
| } else { |
| pdata->fod_data_check = 0; |
| pr_err("%s there is not fod_data\n", __func__); |
| } |
| p = of_get_property(np, "battery,fod_data_cv", &len); |
| if (p) { |
| len = len / sizeof(u32); |
| pdata->fod_data_cv = kzalloc(sizeof(*pdata->fod_data_cv) * len, GFP_KERNEL); |
| ret = of_property_read_u32_array(np, "battery,fod_data_cv", |
| pdata->fod_data_cv, len); |
| pdata->fod_data_check = 1; |
| |
| for(i = 0; i <len; i++) |
| pr_info("%s fod data_cv = %d ",__func__,pdata->fod_data_cv[i]); |
| } else { |
| pdata->fod_data_check = 0; |
| pr_err("%s there is not fod_data_cv\n", __func__); |
| } |
| |
| ret = of_property_read_string(np, |
| "battery,wireless_charger_name", (char const **)&pdata->wireless_charger_name); |
| if (ret < 0) |
| pr_info("%s: Wireless Charger name is Empty\n", __func__); |
| |
| ret = of_property_read_string(np, |
| "battery,charger_name", (char const **)&pdata->wired_charger_name); |
| if (ret < 0) |
| pr_info("%s: Charger name is Empty\n", __func__); |
| |
| ret = of_property_read_u32(np, "battery,wpc_cc_cv_vout", |
| &pdata->wpc_cc_cv_vout); |
| if (ret < 0) |
| pr_info("%s: wpc_cv_call_vout is Empty \n", __func__); |
| |
| ret = of_property_read_u32(np, "battery,wpc_cv_call_vout", |
| &pdata->wpc_cv_call_vout); |
| if (ret < 0) |
| pr_info("%s: wpc_cv_call_vout is Empty \n", __func__); |
| |
| ret = of_property_read_u32(np, "battery,wpc_cc_call_vout", |
| &pdata->wpc_cc_call_vout); |
| if (ret < 0) |
| pr_info("%s: wpc_cc_call_vout is Empty \n", __func__); |
| |
| ret = of_property_read_u32(np, "battery,hv_vout_wa", |
| &pdata->hv_vout_wa); |
| if (ret < 0) { |
| pr_info("%s: no need hv_vout_wa. \n", __func__); |
| pdata->hv_vout_wa = 0; |
| } |
| |
| /* wpc_det */ |
| ret = pdata->wpc_det = of_get_named_gpio_flags(np, "battery,wpc_det", |
| 0, &irq_gpio_flags); |
| if (ret < 0) { |
| dev_err(dev, "%s : can't get wpc_det\r\n", __FUNCTION__); |
| } else { |
| pdata->irq_wpc_det = gpio_to_irq(pdata->wpc_det); |
| pr_info("%s wpc_det = 0x%x, irq_wpc_det = 0x%x \n",__func__, pdata->wpc_det, pdata->irq_wpc_det); |
| } |
| /* wpc_int */ |
| ret = pdata->wpc_int = of_get_named_gpio_flags(np, "battery,wpc_int", |
| 0, &irq_gpio_flags); |
| if (ret < 0) { |
| dev_err(dev, "%s : can't wpc_int\r\n", __FUNCTION__); |
| } else { |
| pdata->irq_wpc_int = gpio_to_irq(pdata->wpc_int); |
| pr_info("%s wpc_int = 0x%x, irq_wpc_int = 0x%x \n",__func__, pdata->wpc_int, pdata->irq_wpc_int); |
| } |
| return ret; |
| } |
| } |
| |
| static ssize_t p9220_store_addr(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct p9220_charger_data *charger = container_of(psy, struct p9220_charger_data, psy_chg); |
| int x; |
| if (sscanf(buf, "0x%x\n", &x) == 1) { |
| charger->addr = x; |
| } |
| return count; |
| } |
| |
| static ssize_t p9220_show_addr(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct p9220_charger_data *charger = container_of(psy, struct p9220_charger_data, psy_chg); |
| return sprintf(buf, "0x%x\n", charger->addr); |
| } |
| |
| static ssize_t p9220_store_size(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct p9220_charger_data *charger = container_of(psy, struct p9220_charger_data, psy_chg); |
| int x; |
| if (sscanf(buf, "%d\n", &x) == 1) { |
| charger->size = x; |
| } |
| return count; |
| } |
| |
| static ssize_t p9220_show_size(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct p9220_charger_data *charger = container_of(psy, struct p9220_charger_data, psy_chg); |
| return sprintf(buf, "0x%x\n", charger->size); |
| } |
| static ssize_t p9220_store_data(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct p9220_charger_data *charger = container_of(psy, struct p9220_charger_data, psy_chg); |
| int x; |
| |
| if (sscanf(buf, "0x%x", &x) == 1) { |
| u8 data = x; |
| if (p9220_reg_write(charger->client, charger->addr, data) < 0) |
| { |
| dev_info(charger->dev, |
| "%s: addr: 0x%x write fail\n", __func__, charger->addr); |
| } |
| } |
| return count; |
| } |
| |
| static ssize_t p9220_show_data(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct p9220_charger_data *charger = container_of(psy, struct p9220_charger_data, psy_chg); |
| u8 data; |
| int i, count = 0;; |
| if (charger->size == 0) |
| charger->size = 1; |
| |
| for (i = 0; i < charger->size; i++) { |
| if (p9220_reg_read(charger->client, charger->addr+i, &data) < 0) { |
| dev_info(charger->dev, |
| "%s: read fail\n", __func__); |
| count += sprintf(buf+count, "addr: 0x%x read fail\n", charger->addr+i); |
| continue; |
| } |
| count += sprintf(buf+count, "addr: 0x%x, data: 0x%x\n", charger->addr+i,data); |
| } |
| return count; |
| } |
| |
| static DEVICE_ATTR(addr, 0644, p9220_show_addr, p9220_store_addr); |
| static DEVICE_ATTR(size, 0644, p9220_show_size, p9220_store_size); |
| static DEVICE_ATTR(data, 0644, p9220_show_data, p9220_store_data); |
| |
| static struct attribute *p9220_attributes[] = { |
| &dev_attr_addr.attr, |
| &dev_attr_size.attr, |
| &dev_attr_data.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group p9220_attr_group = { |
| .attrs = p9220_attributes, |
| }; |
| |
| |
| static int p9220_charger_probe( |
| struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device_node *of_node = client->dev.of_node; |
| struct p9220_charger_data *charger; |
| p9220_charger_platform_data_t *pdata = client->dev.platform_data; |
| int ret = 0; |
| int wc_w_state_irq; |
| |
| dev_info(&client->dev, |
| "%s: p9220 Charger Driver Loading\n", __func__); |
| |
| if (of_node) { |
| pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) { |
| dev_err(&client->dev, "Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| ret = p9220_chg_parse_dt(&client->dev, pdata); |
| if (ret < 0) |
| goto err_parse_dt; |
| } else { |
| pdata = client->dev.platform_data; |
| } |
| |
| charger = kzalloc(sizeof(*charger), GFP_KERNEL); |
| if (charger == NULL) { |
| dev_err(&client->dev, "Memory is not enough.\n"); |
| ret = -ENOMEM; |
| goto err_wpc_nomem; |
| } |
| charger->dev = &client->dev; |
| |
| ret = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK); |
| if (!ret) { |
| ret = i2c_get_functionality(client->adapter); |
| dev_err(charger->dev, "I2C functionality is not supported.\n"); |
| ret = -ENOSYS; |
| goto err_i2cfunc_not_support; |
| } |
| |
| charger->client = client; |
| charger->pdata = pdata; |
| |
| pr_info("%s: %s\n", __func__, charger->pdata->wireless_charger_name ); |
| |
| i2c_set_clientdata(client, charger); |
| |
| charger->pdata->ic_on_mode = false; |
| charger->pdata->cable_type = P9220_PAD_MODE_NONE; |
| charger->pdata->is_charging = 0; |
| |
| charger->pdata->otp_firmware_result = P9220_FW_RESULT_DOWNLOADING; |
| charger->pdata->tx_firmware_result = P9220_FW_RESULT_DOWNLOADING; |
| charger->pdata->tx_status = 0; |
| charger->pdata->cs100_status = 0; |
| charger->pdata->vout_status = P9220_VOUT_0V; |
| charger->pdata->opfq_cnt = 0; |
| |
| charger->psy_chg.name = pdata->wireless_charger_name; |
| charger->psy_chg.type = POWER_SUPPLY_TYPE_UNKNOWN; |
| charger->psy_chg.get_property = p9220_chg_get_property; |
| charger->psy_chg.set_property = p9220_chg_set_property; |
| charger->psy_chg.properties = sec_charger_props; |
| charger->psy_chg.num_properties = ARRAY_SIZE(sec_charger_props); |
| |
| mutex_init(&charger->io_lock); |
| |
| /* wpc_det */ |
| if (charger->pdata->irq_wpc_det) { |
| INIT_DELAYED_WORK(&charger->wpc_det_work, p9220_wpc_det_work); |
| INIT_DELAYED_WORK(&charger->wpc_opfq_work, p9220_wpc_opfq_work); |
| } |
| |
| /* wpc_irq */ |
| if (charger->pdata->irq_wpc_int) { |
| INIT_DELAYED_WORK(&charger->wpc_isr_work, p9220_wpc_isr_work); |
| INIT_DELAYED_WORK(&charger->wpc_tx_id_work, p9220_wpc_tx_id_work); |
| } |
| |
| ret = power_supply_register(&client->dev, &charger->psy_chg); |
| if (ret) { |
| dev_err(&client->dev, |
| "%s: Failed to Register psy_chg\n", __func__); |
| goto err_supply_unreg; |
| } |
| |
| charger->wqueue = create_singlethread_workqueue("p9220_workqueue"); |
| if (!charger->wqueue) { |
| pr_err("%s: Fail to Create Workqueue\n", __func__); |
| goto err_pdata_free; |
| } |
| |
| wake_lock_init(&charger->wpc_wake_lock, WAKE_LOCK_SUSPEND, |
| "wpc_wakelock"); |
| wake_lock_init(&charger->wpc_update_lock, WAKE_LOCK_SUSPEND, |
| "wpc_update_lock"); |
| wake_lock_init(&charger->wpc_opfq_lock, WAKE_LOCK_SUSPEND, |
| "wpc_opfq_lock"); |
| |
| /* Enable interrupts after battery driver load */ |
| /* wpc_det */ |
| if (charger->pdata->irq_wpc_det) { |
| ret = request_threaded_irq(charger->pdata->irq_wpc_det, |
| NULL, p9220_wpc_det_irq_thread, |
| IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | |
| IRQF_ONESHOT, |
| "wpd-det-irq", charger); |
| if (ret) { |
| pr_err("%s: Failed to Reqeust IRQ\n", __func__); |
| goto err_irq_wpc_det; |
| } |
| } |
| |
| /* wpc_irq */ |
| if (charger->pdata->irq_wpc_int) { |
| msleep(100); |
| ret = request_threaded_irq(charger->pdata->irq_wpc_int, |
| NULL, p9220_wpc_irq_thread, |
| IRQF_TRIGGER_FALLING | |
| IRQF_ONESHOT, |
| "wpc-irq", charger); |
| if (ret) { |
| pr_err("%s: Failed to Reqeust IRQ\n", __func__); |
| goto err_irq_wpc_int; |
| } |
| } |
| |
| wc_w_state_irq = gpio_get_value(charger->pdata->wpc_int); |
| pr_info("%s wc_w_state_irq = %d\n", __func__, wc_w_state_irq); |
| if (gpio_get_value(charger->pdata->wpc_det)) { |
| u8 irq_src[2]; |
| pr_info("%s: Charger interrupt occured during lpm \n", __func__); |
| |
| p9220_reg_read(charger->client, P9220_INT_L_REG, &irq_src[0]); |
| p9220_reg_read(charger->client, P9220_INT_H_REG, &irq_src[1]); |
| /* clear intterupt */ |
| p9220_reg_write(charger->client, P9220_INT_CLEAR_L_REG, irq_src[0]); // clear int |
| p9220_reg_write(charger->client, P9220_INT_CLEAR_H_REG, irq_src[1]); // clear int |
| p9220_set_cmd_reg(charger, 0x20, P9220_CMD_CLEAR_INT_MASK); // command |
| queue_delayed_work(charger->wqueue, &charger->wpc_det_work, 0); |
| if(!wc_w_state_irq && !delayed_work_pending(&charger->wpc_isr_work)) |
| queue_delayed_work(charger->wqueue, &charger->wpc_isr_work, msecs_to_jiffies(2000)); |
| } |
| |
| ret = sysfs_create_group(&charger->psy_chg.dev->kobj, &p9220_attr_group); |
| if (ret) { |
| dev_info(&client->dev, |
| "%s: sysfs_create_group failed\n", __func__); |
| } |
| dev_info(&client->dev, |
| "%s: p9220 Charger Driver Loaded\n", __func__); |
| |
| device_init_wakeup(charger->dev, 1); |
| return 0; |
| err_irq_wpc_int: |
| free_irq(charger->pdata->irq_wpc_det, NULL); |
| err_irq_wpc_det: |
| err_pdata_free: |
| power_supply_unregister(&charger->psy_chg); |
| err_supply_unreg: |
| mutex_destroy(&charger->io_lock); |
| err_i2cfunc_not_support: |
| kfree(charger); |
| err_wpc_nomem: |
| err_parse_dt: |
| devm_kfree(&client->dev, pdata); |
| return ret; |
| } |
| |
| static int p9220_charger_remove(struct i2c_client *client) |
| { |
| return 0; |
| } |
| |
| #if defined CONFIG_PM |
| static int p9220_charger_suspend(struct i2c_client *client, |
| pm_message_t state) |
| { |
| struct p9220_charger_data *charger = i2c_get_clientdata(client); |
| |
| if (device_may_wakeup(charger->dev)){ |
| enable_irq_wake(charger->pdata->irq_wpc_int); |
| enable_irq_wake(charger->pdata->irq_wpc_det); |
| } |
| disable_irq(charger->pdata->irq_wpc_int); |
| disable_irq(charger->pdata->irq_wpc_det); |
| |
| return 0; |
| } |
| |
| static int p9220_charger_resume(struct i2c_client *client) |
| { |
| struct p9220_charger_data *charger = i2c_get_clientdata(client); |
| |
| pr_info("%s \n", __func__); |
| |
| if (device_may_wakeup(charger->dev)) { |
| disable_irq_wake(charger->pdata->irq_wpc_int); |
| disable_irq_wake(charger->pdata->irq_wpc_det); |
| } |
| enable_irq(charger->pdata->irq_wpc_int); |
| enable_irq(charger->pdata->irq_wpc_det); |
| |
| return 0; |
| } |
| #else |
| #define p9220_charger_suspend NULL |
| #define p9220_charger_resume NULL |
| #endif |
| |
| static void p9220_charger_shutdown(struct i2c_client *client) |
| { |
| struct p9220_charger_data *charger = i2c_get_clientdata(client); |
| |
| pr_info("%s \n", __func__); |
| if(charger->pdata->is_charging) |
| p9220_set_vrect_adjust(charger, P9220_HEADROOM_1); |
| } |
| |
| static const struct i2c_device_id p9220_charger_id_table[] = { |
| { "p9220-charger", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, p9220_id_table); |
| |
| #ifdef CONFIG_OF |
| static struct of_device_id p9220_charger_match_table[] = { |
| { .compatible = "idt,p9220-charger",}, |
| {}, |
| }; |
| #else |
| #define p9220_charger_match_table NULL |
| #endif |
| |
| static struct i2c_driver p9220_charger_driver = { |
| .driver = { |
| .name = "p9220-charger", |
| .owner = THIS_MODULE, |
| .of_match_table = p9220_charger_match_table, |
| }, |
| .shutdown = p9220_charger_shutdown, |
| .suspend = p9220_charger_suspend, |
| .resume = p9220_charger_resume, |
| .probe = p9220_charger_probe, |
| .remove = p9220_charger_remove, |
| .id_table = p9220_charger_id_table, |
| }; |
| |
| static int __init p9220_charger_init(void) |
| { |
| pr_info("%s \n",__func__); |
| return i2c_add_driver(&p9220_charger_driver); |
| } |
| |
| static void __exit p9220_charger_exit(void) |
| { |
| pr_info("%s \n",__func__); |
| i2c_del_driver(&p9220_charger_driver); |
| } |
| |
| module_init(p9220_charger_init); |
| module_exit(p9220_charger_exit); |
| |
| MODULE_DESCRIPTION("Samsung p9220 Charger Driver"); |
| MODULE_AUTHOR("Samsung Electronics"); |
| MODULE_LICENSE("GPL"); |